Answer:
amplitude
Explanation:
Amplitude is the characteristic of waves which caused the bridge to collapse. Amplitude of a wave is the maximum amount of displacement of a particle occurs in the medium from its rest position. When the frequency of a wave reaches the natural frequency of the bridge, the oscillation of the bridge produce an amplitude where it causing the destruction of the bridge which is called Resonance. So we can say that amplitude is the characteristic of waves which is responsible for the collapse of the bridge.
Answer: C.interference, because constructive interference occurred when the wind frequency matched the natural frequency of the bridge
Explanation:
Choose the friction which opposes the relative motion between surfaces in motion a.Static friction b.Kinetic friction c.Sliding friction d.Both kinetic and sliding friction
Answer:
d. Both kinetic and sliding friction
Explanation:
Kinetic friction, commonly known as sliding friction, happens when a body with its surfaces in contact is in relative motion with another. It's the frictional force slowing it down, and finally stopping a moving body. One can describe sliding friction as the resistance any two objects create while sliding against each other. It is often documented as the force required to hold a surface moving along another surface. It is determined by two variables- one is material of the object and another is its weight.
As a motorcycle takes a sharp turn, the type of motion that occurs is called _______________ motion.
Answer:
circular motion
Explanation:
As a motorcycle takes a sharp turn, the type of motion that occurs is called circular motion.
Circular motion is a movement of an object along a circular path. As this motorcycle makes the sharp turn, it is acted upon by a centripetal force which directs the motorcycle towards the center.
Therefore, circular motion is the correct answer to the question.
Answer:
Circular Motion
when a 0.622kg basketbll hits the floor its velocit changes from 4.23m/s down to 3.85m/s up. if the averge force was 72.9N how much time was it in contact with the floor?
Answer:
Time, t = 3.2 ms
Explanation:
It is given that,
Mass of basketball, m = 0.622 kg
Initial velocity, u = 4.23 m/s
Final velocity, v = 3.85 m/s
Average force acting on the ball, F = 72.9 N
We need to find the time of contact of the ball with the floor. Let t is the time of contact. So,
[tex]F=ma\\\\F=\dfrac{m(v-u)}{t}\\\\t=\dfrac{m(v-u)}{F}\\\\t=\dfrac{0.622\times (3.85-4.23)}{72.9}\\\\t=0.0032\ s\\\\\text{or}\\\\t=3.2\ ms[/tex]
So, the ball is in contact with the floor for 3.2 ms.
If I were to fill a water bottle full of air and go up in elevation, would the water bottle expand or shrink? If I were to fill a water bottle full of air and go down in elevation, would the water bottle expand or shrink? I am at elevation 20000 I think.
Answer:
a. It would shrink
b. It would expand
Explanation:
a. Since the water bottle is filled with air at atmospheric pressure at 20000 ft, and since atmospheric pressure decreases with altitude, when we go up in elevation.
The pressure exerted by the molecules of air in the water bottle seek to balance out the atmospheric pressure as we go higher. Since the atmospheric pressure exerted by the molecules of air in the atmosphere are greater than that exerted by the molecules of air in the water bottle, this causes the volume of the water bottle to decrease and thus shrinks the water bottle until the pressure balances out
b. Since the water bottle is filled with air at atmospheric pressure at 20000 ft, and since atmospheric pressure increases with decreasing altitude, when we go down in elevation.
The pressure exerted by the molecules of air in the water bottle seek to balance out the atmospheric pressure as we go lower. The water bottle expands until the atmospheric pressure outside equals the pressure inside the water bottle.this causes the volume of the water bottle to increase and thus expands the water bottle until the pressure balances out
A student throws a 120 g snowball at 7.5 m/s at the side of the schoolhouse, where it hits and sticks. What is the magnitude of the average force on the wall if the duration of the collision is 0.15 s
Answer:
The magnitude of the average force on the wall during the collision is 6 N.
Explanation:
Given;
mass of snowball, m = 120 g = 0.12 kg
velocity of the snowball, v = 7.5 m/s
duration of the collision between the snowball and the wall, t = 0.15 s
Magnitude of the average force can be calculated by applying Newton's second law of motion;
F = ma
where;
a is acceleration = v / t
a = 7.5 / 0.15
a = 50 m/s²
F = ma
F = 0.12 x 50
F = 6 N
Therefore, the magnitude of the average force on the wall during the collision is 6 N.
Which of the following statements are true (mark all that apply) primordial nucleosynthesis produced all of the elements heavier than helium chemical composition of our solar system matches the chemical composition of the Milky Way some of the stars in the Milky Way may be older than the Milky Way your body contains a lot of helium nearly all atoms of elements heavier then helium were produced through nuclear fusion in stellar interiors and through reactions that occur during explosions that massive stars undergo at the ends of their lives or during mergers of stellar remnants called neutron stars some of the oldest galaxies are about 13.2 billion years old nucleosynthesis is a process through which the atoms of various elements are produced you're mainly made of hydrogen
Answer:
The correct options are;
1) The chemical composition of our solar system matches the chemical composition of the Milky Way
2) Nearly all atoms of elements heavier than helium were produced through nuclear fusion in stellar interiors and through reactions that occur during explosions that massive stars undergo at the ends of their lives or during mergers of stellar remnants called neutron stars
3) Some of the oldest galaxies are about 13.2 billion years old
4) Nucleosynthesis is a process through which the atoms of various elements are produced
5) You re mainly made of hydrogen
Explanation:
1) There are dependencies between chemical composition of stars and planets and the same distribution of chemicals we have in our Solar system have been observed to be present in varying resemblance through out the Milky Way
2) The formation of heavier elements are believed to have been formed by astrophysical fusion processes
3) The oldest known object (and hence the galaxy where the star resides), is from a distant star known as GRB 090423 which is about 13 billion years old
4) New atomic nuclear are created by the process of protons and neutrons by the process of nucleosynthesis
5) 62%of the atoms in the body are hydrogen atoms.
differences between concave and convex meniscus
Explanation:
A concave meniscus,(normally seen) occurs when the molecules of the liquid are attracted to those of the container. This occurs with water and a glass tube. A convex meniscus occurs when the molecules have a stronger attraction to each other than to the container, as with mercury and glass.
Answer:
there are differences between concave and convex menuscus
Explanation:
A concave meniscus, which is what you normally will see, occurs when the molecules of the liquid are attracted to those of the container. This occurs with water and a glass tube. A convex meniscus occurs when the molecules have a stronger attraction to each other than to the container, as with mercury and glass.
what are laws of newton
Answer:
In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction
Explanation:
Answer:
Newton's Law of Motion
1- Every object persists in its state of rest or uniform motion - in a straight line unless it is compelled to change that state by forces impressed on it.
2- Force is equal to the change in momentum per change in time. For a constant mass, force equals mass times acceleration.
3- For every action, there is an equal and opposite reaction.
Oil at 150 C flows slowly through a long, thin-walled pipe of 30-mm inner diameter. The pipe is suspended in a room for which the air temperature is 20 C and the convection coefficient at the outer tube surface is 11 W/m2 K. Estimate the heat loss per unit length of tube.
Answer:
1.01 W/m
Explanation:
diameter of the pipe d = 30 mm = 0.03 m
radius of the pipe r = d/2 = 0.015 m
external air temperature Ta = 20 °C
temperature of pipe wall Tw = 150 °C
convection coefficient at outer tube surface h = 11 W/m^2-K
From the above, we assumed that the pipe wall and the oil are in thermal equilibrium.
area of the pipe per unit length A = [tex]\pi r ^{2}[/tex] = [tex]7.069*10^{-4}[/tex] m^2/m
convectional heat loss Q = Ah(Tw - Ta)
Q = 7.069 x 10^-4 x 11 x (150 - 20)
Q = 7.069 x 10^-4 x 11 x 130 = 1.01 W/m
The heat loss per unit length of tube should be considered as the 1.01 W/m.
Calculation of the heat loss:Since
diameter of the pipe d = 30 mm = 0.03 m
radius of the pipe r = d/2 = 0.015 m
external air temperature Ta = 20 °C
temperature of pipe wall Tw = 150 °C
convection coefficient at outer tube surface h = 11 W/m^2-K
Now
area of the pipe per unit length A should be
= πr^2
= 7.069*10^-4 m^2/m
Now
convectional heat loss Q = Ah(Tw - Ta)
Q = 7.069 x 10^-4 x 11 x (150 - 20)
Q = 7.069 x 10^-4 x 11 x 130
= 1.01 W/m
hence, The heat loss per unit length of tube should be considered as the 1.01 W/m.
Learn more about heat here: https://brainly.com/question/15170783
Answer the following questions regarding the equation:
N₂ + 3H₂ → 2NH₃
1) indicates what type of reaction is
2) what represents the coefficients 3 and 2 in the previous reaction is done for
3) What would be missing in the previous equation to make it more accurate is
Explanation:
1) This is a synthesis reaction (two or more reactants combine to form a single product).
2) The coefficients are added to balance the reaction.
3) Adding the states of matter (solid, liquid, gas) will make the reaction more precise.
A ball has a mass of 0.25 kg and is moving to the right at 1.0 m/s. It hits a ball of mass 0.15 kg that is initially at rest. After the collision, the 0.15 kg ball moves off to the right with a velocity of 0.75 m/s. What is the final velocity of the 0.25 kg ball? 0.42 m/s to the right 0.42 m/s to the left 0.55 m/s to the right 0.55 m/s to the left
Answer:
C-0.55 m/s to the right
Explanation:
edg
Answer:
0.55 to the right
Explanation:
1. Find the energy required to melt 255g of ice at 0°C into water at 0°C
Answer:
E = 85170 J (/ 85.2 kJ)
Explanation:
Take the latent heat of fusion of water be 334J / g.
From the equation E = ml,
E = energy required (unknown),
mass m = 255g,
latent heat of fusion l = 334J / g,
E = 255 x 334
E = 85170 J (/ 85.2 kJ)
What can happen if a body moves through speed of light
As waves travel into the denser medium, they slow down and wavelength decreases.
Explanation:
The denser the medium the slower the waves (speed of light) travels.
◦•●◉✿When the body approaches the speed of light, the body's length appears to contract in the direction of travel, and its mass appears to increase from the point of view of a stationary observer. Only photons move to light velocity. They don´t have length.✿◉●•◦
An electron moving with a velocity of 5 × 104 m s -1 enters into a uniform electric field and acquires a uniform acceleration of 104 m s -2 in the direction of its initial motion. (i) Calculate the time in which the electron would acquire a velocity double of its initial velocity. (ii) How much distance the electron would cover in this tim
Answer:
(i) t = 5s
(ii) x = 3.75*10^5 m
Explanation:
(i) To calculate the time that the electron takes to reach twice the value of its initial velocity, you use the following formula:
[tex]v=v_o+at[/tex] (1)
vo: initial velocity of the electron = 5*10^4 m/s
v: final velocity of the electron = 2vo = 1*10^5 m/s
a: acceleration of the electron = 1*10^4 m/s^2
You solve the equation (1) for t, and replace the values of the parameters:
[tex]t=\frac{v-v_o}{a}=\frac{1*10^5m/s-5*10^4m/s}{1*10^4m/s^2}=5s[/tex]
The electron takes 5s to reach twice its initial velocity.
(ii) The distance traveled by the electron in such a time is:
[tex]x=v_ot+\frac{1}{2}at^2[/tex] (2)
you replace the values of the parameters in the equation (2):
[tex]x=(5*10^4m/s)(5s)+\frac{1}{2}(1*10^4m/s^2)(5s)^2\\\\x=3.75*10^5m[/tex]
The distance traveled by the electron is 3.75*10^3m/s
A pendulum at position A is released and swings through position B to position Con the other side.
B
1. Describe the total mechanical energy at each of the following positions. (3)
A.
B.
C
Explanation:
Given the conditions A,B and C when the pendulum is released, at point A the initial velocity of the pendulum is zero(0), the potential energy stored is maximum(P.E= max),
the conditions can be summarized bellow
point A
initial velocity= 0
final velocity=0
P.E= Max
K.E= 0
point B
initial velocity= maximum
final velocity=maximum
P.E=K.E
point C
initial velocity= min
final velocity=min
P.E= 0
K.E= max
a force of 50 n acts on abody of mass 5 kg .calculate the acceleration produced
Answer:
a = 10 m/s²
Explanation:
Given:
Force = F = 50 N
Mass = m = 5 kg
Required:
Acceleration = a = ?
Formula:
F = ma
Solution:
Rearranging the formula for a
=> a = F/m
=> a = 50/5
=> a = 10 m/s²
During the warm-up and your scheduled physical activity, what was the weather like? Did the
temperature or conditions affect how much water you drank? How?
Answer: I did these exercises outdoors. The weather was hot and humid, so I drank about two cups of water during the workout. I also drank a cup of water about an hour before I started. Yes, the weather most definitely affected how much I drank.
Explanation: Edmentum
Consider a satellite in a circular orbit around the earth. Why is it important to give a satellite a horizontal speed when placing it in orbit? What will happen if the horizontal speed is too small? What will happen if the speed is too large?
Answer:
In this case, the horizontal velocity of the rocket starts from the acceleration, so if its velocity drops to zero,
Explanation:
When a satellite is in orbit the most important force is the docking of gravity with the Earth
F = m a
where the acceleration is centripetal and F is the force of universal attraction
centripetal acceleration is
a = v² / r
F = m v² / r
In this case, the horizontal velocity of the rocket starts from the acceleration, so if its velocity drops to zero, the force also drops to serious and the satellite steels to Earth.
The speed of the satellite is provides the speed, by local for smaller speeds in satellite, it descends in its orbits and when the speed is amate you have the energy to stop an orb to go to a higher orbit.
I NEEED HELP!!!!! Upon using Thomas Young’s double-slit experiment to obtain measurements, the following data were obtained. Use these data to determine the wavelength of light being used to create the interference pattern.
Do this using three different methods.
The angle to the eighth maximum is 1.12°.
The distance from the slits to the screen is 302.0 cm.
The distance from the central maximum to the fifth minimum is 3.33cm.
The distance between the slits is 0.000250 m
Answer:
The wavelength is approximately 611 nm
Explanation:
We can use the formula for the condition of maximum of interference given by:
[tex]d\,sin(\theta)=m\,\lambda\\(0.000250\,\,m)\,\,sin(1.12^o)=8\,\lambda\\\lambda=\frac{1}{8} \,(0.000250\,\,m)\,\,sin(1.12^o)\\\lambda \approx 610.8\,\,nm[/tex]
We can also use the formula for the distance from the central maximum to the 5th minimum by first finding the tangent of the angle to that fifth minimum:
[tex]tan(\theta)=\frac{y}{D}\\ tan(\theta)=\frac{0.0333}{3.02} =0.011026[/tex]
and now using it in the general formula for minimum:
[tex]d\,sin(\theta)\approx d\,tan(\theta)=(m-\frac{1}{2} )\,\lambda\\\lambda\approx 0.00025\,(0.011026)/(4.5)\,\,m\\\lambda\approx 612.55\,\,nm[/tex]
Answer:
The correct answer is [tex]6.1\times10^{-7}\:m[/tex]
Explanation:
The distance from the central maxima to 5th minimum is:
[tex]x_{5n}-x_{0} =3.33\:cm=0.033\:m[/tex]
The distance between the slits and the screen:
[tex]L = 302\:cm = 3.02\:m[/tex]
Distance between 2 slits: [tex]d = 0.00025\:m[/tex]
[tex](n-\frac{1}{2})\lambda=\frac{d(x_n)}{L}[/tex]
For fifth minima, n = 5... so we have:
[tex]x_{5n}=\frac{9\lambda L}{2d}[/tex]
For central maxima, n = 0... so we have:
[tex]x_{0}=\frac{n\lambda L}{d}=0[/tex]
So the distance from central maxima to 5th minimum is:
[tex]\frac{9\lambda \:L}{2d}-0=0.033[/tex] (Putting the values, we get):
[tex]\Rightarrow \lambda = 6.1\times 10^{-7}\:m[/tex]
Best Regards!
Two teams are playing tug-of-war. Team A, on the left, is pulling on the rope with an effort of 5000 N. If the rope is moving at a constant velocity, how hard and in which direction is team B pulling?
A. 2500 N to the left
B. 5000 N to the right
C. 2500 N to the right
D. 5000 N to the left
Explanation:
If Team A is on the left, B is on the right
if the force is constant, it means that the effort applied is equal.
So Team B is pulling 5000N to the right.
Dominic made the table below to organize his notes about mixtures.
Properties of Mixtures
has no set composition
must have more than one state of matter
must have more than one substance
What mistake did Dominic make?
The title should read "Properties of Solutions" because some mixtures do not have all of the properties listed.
There is a definite recipe to make each mixture, so the composition of a mixture is set.
Although it is possible to have more than one state, it is also possible to have only one state.
A single substance can be used to make a mixture if the substance is composed of more than one element.
Answer:
Althought it us possible to have more then one state, it's also possible to have only one state of matter
Explanation:
You can make solutions of only one state if matter, for example , it two liquids can be mixed to form a solution they are called miscible.
Answer:
The correct answer is C.) Although it is possible to have more than one state, it is also possible to have only one state.
Explanation:
I just did the test on edge and got it right
What kind of substance can you pour from one container into another without a change in volume
Answer:
Liquids
Explanation:
Liquids take up the shape of the container it is poured into but will never change its volume.