click to turn on the electric field. there is something interesting about the direction of electric field between the plates. why do you think that this situation appears in so many physics problems?

Atomic Clock Transition The global standard for time is based on a transition in cesium atoms that occurs when a microwave photon of frequency 9,192,631,770 Hz is absorbed, then the energy difference between the two levels of cesium that correspond with this transition is 38.06 x 10-¹⁴eV

When Cesium atoms are bombarded with microwaves of a certain frequency, this 55th electron goes from one of these hyperfine energy states to the other but then it comes back to the slightly lower energy state and when it does it emits electromagnetic radiation with the exact frequency of 9,192,631,770 Hertz. The time interval in which this wave completes these many cycles is defined as a second. The second is the duration of 9,192,631,770 periods of the radiation corresponding to the transition between the two hyperfine levels of the ground state of the caesium 133 atom.

As we know, energy difference is equal to-

∆E = hf

where h = Planck's constant i.e. 6.626x10-³⁴

f = frequency i.e. 9,192,631,770

∆E = (6.626 x 10-³⁴) * (9,192,631,770)

∆E = 60.91 x 10-³³Joule

To convert joule to electron volt (eV)

1eV = 1.6*10-¹⁹J

∆E = 60.91 x 10-³³/1.6 x 10-¹⁹

∆E = 38.06 x 10-¹⁴eV

To learn more about atomic clock transition, visit----

https://brainly.com/question/16620742

#SPJ4

The wavelength shift of x-rays be exactly double that found in part (a), if the scattering angle is 84.26°

Δλ = h ( 1 - cos θ ) / me c

Δλ = Wavelength shift

h = Planck's constant

θ = Scattering angle

me = Mass of an electron

c = Speed of light

h = 6.626 * 10⁻³⁴ J s

me = 9.1 * 10⁻³¹ kg

c = 3 * 10⁸ m / s

Δλ' = 6.9 * 10⁻¹⁴ m

Δλ = 2 Δλ'

Δλ = 2 * 6.9 * 10⁻¹⁴

Δλ = 13.8 * 10⁻¹⁴ m

13.8 * 10⁻¹⁴ = 6.626 * 10⁻³⁴ ( 1 - cos θ ) / 9.1 * 10⁻³¹ * 3 * 10⁸

13.8 * 10⁻¹⁴ = 0.2427 * 10⁻¹¹ ( 1 - cos θ )

1 - cos θ = 56.86 * 10⁻³

cos θ = 56.859 * 10⁻³

θ = 84.26°

The given question is incomplete. The complete question is:

for what scattering angle (in degrees) will the wavelength shift of x-rays be exactly double that found in part (a) which is 6.9 * 10⁻¹⁴ m.

To know more about wavelength shift

https://brainly.com/question/13259906

#SPJ4

The 500g ball with 4.0 J of kinetic energy, v = √(2*4.0 J/500g) = 2.0 m/s.

What is kinetic energy?

Kinetic energy is the energy associated with movement. It is the energy an object has due to its motion. Kinetic energy can be either potential or kinetic. Potential energy is stored energy and is the energy an object has due to its position or state. Kinetic energy is the energy of movement, and is the energy an object has due to its velocity. Kinetic energy is a function of the mass and velocity of an object. The kinetic energy of an object is equal to one half of its mass multiplied by the square of its velocity. Kinetic energy can be converted into other forms of energy, such as heat, sound, and light. Kinetic energy can also be converted into work, such as when a car accelerates or brakes. Ultimately, kinetic energy is the energy of motion and can be used to do work.

Kinetic energy (KE) of a moving object is equal to 1⁄2 its mass (m) multiplied by its velocity (v) squared.
KE = 1/2 mv2.
Rearranging this equation, we can calculate the velocity of an object given its mass and its kinetic energy.
v = √(2KE/m).
Thus, for the 500g ball with 4.0 J of kinetic energy, v = √(2*4.0 J/500g) = 2.0 m/s.

To learn more about kinetic energy
https://brainly.com/question/8101588
#SPJ1

0.296 m along the x-axis can a third charge Q = -8.3 µC be placed such that the resultant force on this third charge is zero.

Electric charge is a characteristic shared by many basic, or subatomic, particles of matter. For instance, protons have a positive charge and electrons have a negative charge, and neutrons have no charge.

Given that,

q₁ = 3.1 x 10⁻⁶ C

q₂ = - 8.7 x 10⁻⁶ C

x = - 0.2 m

Q = - 8.3 µC

Let, the charge is kept at r.

The force due to first charge:

F₁ = k × q₁ × Q / r²

The force due to second charge:

F₂ = k × q₂ × Q / (r -x)²

The net force acting on the third charge is zero.

F₁ + F₂ = 0

k × q₁ × Q / r² =  k × q₂ × Q / (r -x)²

Hence, the position of charge on x-axis:

r = x / ( 1 - [tex]\sqrt{q_2 /q_1}[/tex])

r = -0.20 m / (1 - [tex]\sqrt{(8.6 *10^-6 /3.1 *10^-6}[/tex])

r = 0.296 m

To know more about charge refer to:

https://brainly.com/question/18102056

#SPJ1

According to collision- coalescence proposition, conformation of droplet from pall clouds occurs when pall clouds collide and coalesce or stick together.

The only significant difference between a droplet and a pall drop is that a droplet correspond of a haste that's non-negligible during the fall.

Larger driblets having advanced terminal rapidity fall briskly and collide with lower clouds. frequently the pall driblets stick together and coalesce to form a larger drop.

This starts a chain response where these bigger driblets fall indeed fleetly, collide with the other clouds in their path and combine with these driblets.

As drop and ice demitasse size increase, the probability increases that the clouds will burst in the pall. This is the medium behind rush. When the shadows come heavy enough due to these clouds or ice chargers, rain or snow is produced that falls to the ground.

To learn more about clouds, refer: https://brainly.com/question/13434971

#SPJ4

Technician It is accurate to state that the battery was connected with the wrong polarity.

What is battery ?

A battery is a device that transforms chemical energy into electrical energy. It can include one or more electrical cells. Like many other common energy sources, batteries store energy through chemistry in the form of chemical potential.An electric circuit is used in this kind of reaction to transmit electrons from one material to another.

The heat created by the battery's reverse polarity may result in hydrogen gas (ignitable), which could blow the battery's casing up. The battery's damaged cover might allow acid to enter, melting delicate equipment and potentially inflicting serious injury. When you use a battery-powered device while it is plugged in, the entire circuit will be energised, which increases the risk of an electrical shock. Although the damage may be difficult to observe, reverse polarity can result in PCB damage and even PCB failure. Your appliances may be damaged or short-circuited by reversed polarity. Household appliances may overheat as a result of this outlet wiring error, which could also harm the wiring and internal circuitry.

To learn more about battery click here:

https://brainly.com/question/19225854

#SPJ4

The wheel rotate through 64 revolutions in the next 5.00 s

Using 2nd rotational kinematic equation:

\theta = wi*t + (1/2)*\alpha*t^2

From the question, we have

t = 2.50 sec, \theta = 8.00 rev = 8.00*2*pi rad,

wi = initial angular velocity = 0 rad/sec

So,

16.00*pi = 0*2.50 + (1/2)*\alpha*2.50^2

\alpha = 2*16.00*pi/2.50^2 = 16.08 rad/sec^2

Now in t = 7.50 sec (next 5.00 sec)

number of revolutions will be:

\theta1 = 0*7.50 + (1/2)*16.08*7.50^2 = 452.25 rad

So revolutions will be:

\theta1 = 452.25/(2*pi) = 72.0 rev

revolutions = \theta1 - \theta = 72.0 - 8.00 = 64.0 rev

Multiplication:

It is a fundamental operation in mathematics that is frequently utilized in everyday life. When we need to combine groups of similar sizes, we utilize multiplication. The fundamental concept of repeatedly adding the same number is represented by the process of multiplication.

Complete question:

A wheel rotates from rest with constant angular acceleration. If it rotates through 8.00 revolutions in the first 2.50 s, how many more revolutions will it rotate through in the next 5.00 s?

To learn more about multiplication visit: https://brainly.com/question/5992872

#SPJ4

To find the magnitude of the tension in rope A, we need to consider the forces and torques acting on the system.

In this problem, the forces acting on the system are the weight of the block and the tensions in ropes A and B. The torques are the forces acting on the ropes multiplied by their distances from the axis of rotation.

We can use the concept of equilibrium to solve this problem. When an object is in equilibrium, the sum of the forces and the sum of the torques must be zero. In this case, the forces on the system are balanced, so the sum of the forces is zero. We can write this as:

$$T_A + T_B - W = 0$$

where $T_A$ and $T_B$ are the tensions in ropes A and B, and $W$ is the weight of the block. We are given that $T_B = 3200 \text{ N}$ and $W = 500 \text{ N}$.

Next, we need to consider the torques on the system. If the axis of rotation is placed on rope A, the only torque acting on the system will be the torque due to the tension in rope B.

The torque due to the tension in rope B is given by the equation $\tau = rT$, where $\tau$ is the torque, $r$ is the distance from the axis of rotation to the point where the force is applied, and $T$ is the force.

In this case, the distance from the axis of rotation to the point where the force is applied is $r = 10 \text{ m}$, and the force is the tension in rope B, $T = 3200 \text{ N}$. The torque due to the tension in rope B is therefore $\tau = 10 \text{ m} \times 3200 \text{ N} = 32000 \text{ Nm}$.

Since the system is in equilibrium, the sum of the torques must be zero. We can write this as:

$$\tau = 0$$

Substituting the value of the torque due to the tension in rope B, we get:

$$32000 \text{ Nm} = 0$$

This equation is satisfied, so the system is in equilibrium.

Finally, we can use the equation for the sum of the forces to solve for

Learn more about equilibrium:
https://brainly.com/question/27886175

#SPJ4

4.49 sec

Given

 Mass of simple pendulum =  0.6 kg

String of simple pendulum with  length = 5m

Equation used:- T = 2 π (L / g)^1/2

T = period of oscillations

L = length of the pendulum

g = acceleration of gravity

T = 6.28 (5 m / 9.80 m/s^2)^1/2

T = 4.49 sec     (the period is not dependent on mass)

A simple pendulum is defined to be a point mass or bob (taking up no space) that is suspended from a weightless string or rod. Such a pendulum moves in a harmonic motion

find more:-https://brainly.com/app/ask?q=hat+is+the+period+of+small-angle+oscillations+of+a+simple+pendulum+with+a+mass+of+0.6+kg+at+the+end+of+a+string+of+length+5+m%3F

#SPJ4

The electron in tungsten's energy is 66 eV and wavelength is 1.89 x 10⁻¹¹m.

To learn more about wavelength refer to :

https://brainly.com/question/10750459

#SPJ4

The majority of nutrients and minerals are absorbed from food by the small intestine, also referred to as the small bowel, which is an organ in the digestive system, Food that has been swallowed cannot pass back up the lower esophagus due to a ring of muscle fibers.

1) Because they consume plant and grass-based meals that are high in cellulose, which takes a while to digest, herbivores have longer small intestines than carnivores. Bile, a digestive fluid released by the liver, is kept in the gallbladder.

2) The lower esophageal sphincter, a ring of muscle fibers, separates the esophagus from the stomach. Heartburn and other gastric disease symptoms can result from food and fluids moving backward into the esophagus if the sphincter does not seal completely (GERD).

Regular overeating and being overweight cause the stomach to enlarge and significantly increase the strain on the LES.

For more information on the small intestine kindly visit to

https://brainly.com/question/24180887

#SPJ4

Two charged particles repel each other with a force f. If the charge on only one of the particles is doubled and the distance between them is also doubled, then the force will be multiplied by a factor of 8.

F = k * q1 * q2 / d^2

Where:

F = electrical force between the two particles

k = Coulomb's law constant

q = quantity of charge

d = distance between the two particles

Let’s say that only the charge of q1 is doubled and the distance is halved. Therefore the new force would be:

F (new) = k * 2q1 * q2 / (d / 2)^2

F (new) = 8 k * q1 * q2 / d^2

F (new) = 8 * F (initial)

Therefore the force is multiplied by a factor of 8.

To learn more about repel refer to:

https://brainly.com/question/4307288

#SPJ4

By nation, technology, and urban density, there are vast differences. To connect to the cell tower in a trustworthy manner, use a cellphone.

An object that generates radio waves that radiate from an antenna is referred to as a transmitter in the field of telecommunications. A transmitter is a device used in process control that transforms a sensor's output signal into a signal that can be used to measure and regulate a process variable.

All electrical gadgets, including mobile phones, television stations, ships, etc., require a transmitter as a basic component. In addition, they are utilized for navigation. A receiver is an electrical gadget that picks up radio waves and messages that the transmitter transmits.

To know more about Transmitter visit:

https://brainly.com/question/14477607

#SPJ4

The potential energy of the spring will be 4 times as much.

What is potential energy?

Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is squeezed or extended, its potential energy increases. If a steel ball is lifted above the ground as opposed to falling to the ground, it has higher potential energy.

In the first question, we have to caculate the constant of the spring with this equation:

[tex]$$m * g=k * x$$[/tex]

Getting the k :

[tex]k=\frac{m * g}{x}=\frac{0,2[k g] * 9,81\left[\frac{m}{*^2}\right]}{0,05[\mathrm{~m}]}=39,24\left[\frac{N}{m}\right]$$[/tex]

Then we can calculate how much the spring stretch whith the another mass of [tex]$0,2 \mathrm{~kg}$[/tex] :

[tex]x=\frac{m * g}{k}=\frac{0,4[k g] * g, 81\left[\frac{m}{a^2}\right]}{39,24\left[\frac{N}{m}\right]}=0,1[m]$$[/tex]

The energy of a spring:

[tex]E=\frac{1}{2} * k * x^2$$[/tex]

For the first case:

[tex]E=\frac{1}{2} * 39,24\left[\frac{N}{m}\right] *(0,05[m])^2=0,049[J]$$[/tex]

For the second case:

[tex]E=\frac{1}{2} * 39,24\left[\frac{N}{m}\right] *(0,1[m])^2=0,0196[J]$$[/tex]

If you take the relation [tex]$\mathrm{E} 2 / \mathrm{E} 1=4$[/tex].

To learn more about Potential energy visit:https://brainly.com/question/24284560

#SPJ4

Earth's surface would need to attain a temperature of 12,742 K in order to radiate 3,000 times as much thermal energy

The emitted power per unit area of a black body is given by:P = σT^4 Where is the σ Stefan-Boltzmann constant and T is the temperature in Kelvin.

Therefore, we can solve for the temperature that Earth's surface would need to attain in order to radiate 3,000 times as much thermal energy by rearranging the equation to solve for T:

T = (P/σ)^1/4

T = (3000/σ)^1/4

T = (3000/5.67x10^-8)^1/4

T = 12,742 K

Therefore, Earth's surface would need to attain a temperature of 12,742 K in order to radiate 3,000 times as much thermal energy.

For more questions like Earth's surface click the link below:

https://brainly.com/question/15324414

#SPJ4

The instantaneous acceleration of the object at t = 2 seconds is:

2 m/s2.

In mechanics, acceleration is the charge of change of the velocity of an item with respect to time. Accelerations are vector portions. The orientation of an object's acceleration is given via the orientation of the internet pressure appearing on that object.

Acceleration, charge at which velocity adjustments with time, in terms of both speed and direction. A point or an object moving in a directly line is accelerated if it hastens or slows down.

Learn more about acceleration here:

https://brainly.com/question/605631

#SPJ4

According to the Statement it always was receding at its current rate, that galaxy was just next to our own galaxy, moving at 8000 km/s.

Astronomy The Universe The Nebula Galaxy. Did you know that, in conjunction to our light, the Sun, the Milky Way Cluster, a large expanse of space, includes millions and billions of other stars? Its Milky Way is distinguished by a phenomenal number of stars, infinitesimal particles, and gas.

Since V = H x d, the velocity of a galaxy at a distance of 400 x 10⁶ light-years = 8000 km/s

For H = 20 km/s per million light-years. The time required to travel

4 x 10⁸ light - years at 8000 km/s is given by :

T = (4x10⁸ light - years ) (9.46 x 10¹² km /light-year) ÷ 8 x 10³

= 4.7 x 10¹⁷ = 15 billion year

To know more about Galaxy visit :

https://brainly.com/question/14766416

#SPJ4

Complete question : Consider a galaxy at a distance of 400 million light-years receding from us at a velocity, v. If the Hubble constant is 20 km/s per million light-years, what is its velocity? How long ago was that galaxy right next door to our own Galaxy if it has always been receding at its present rate?

The temperature coefficient of resistivity of metal

10 = r0(1 + 20k)

10.5 = r0(1 + 90k);

10.5/10 = (1 + 90k)/(1 + 20k);

10.5 + 210k = 10 + 900k

k = 0.5/690 = 7.25·10-4 1/C

The primary unit of temperature within the worldwide gadget of units (SI) is the kelvin. It has the sign K . For normal programs, it's far often handy to use the Celsius scale, in which 0 °C corresponds very carefully to the freezing factor of water and a 100 °C is its boiling factor at sea level.

Temperature is a measure of the common kinetic energy of the debris in an object. While the temperature increases, the movement of those particles also will increase. Temperature is measured with the thermometer or calorimeter.

Learn more about temperature here:- https://brainly.com/question/26866637

#SPJ4

The kinetic energy of the baseball be 63 joule.

The player had to work of 63 joule on the ball to give it this energy.

According to the definition of kinetic energy in physics, it is the amount of work that an item may accomplish while in motion.

As a scalar quantity, kinetic energy can only be fully defined by its magnitude.

Given that:

Mass of the baseball: m = 0.14 kg.

Speed of the baseball: v = 30 m/s.

So, kinetic energy of the baseball= 1/2×0.14×30² joule = 63 joule.

Hence, the player  had to work of 63 joule on the ball to give it this energy.

Learn more about kinetic energy here:

https://brainly.com/question/15764612

#SPJ1

A refrigerator is an example of a: Heat Pump

What is second law of thermodynamics?

According to Clausius' statement on the second law of thermodynamics, it is impossible to build a system that operates in a cyclical process, in which heat moves from areas of lower temperature to areas of higher temperature without working on it.

This statement applies to systems that transfer heat from a cold reservoir to a hot reservoir. Refrigerators and heat pumps do the same thing.

Refrigerators give off heat from the freezer to the atmosphere (exhaust air at the back of the refrigerator) even though the temperature inside the freezer is always lower than the temperature of the atmosphere.

Similarly, a heat pump transfers heat from a room to the outside air, cooling the room, which is cooler than the outside air.

A refrigerator is an example of a: Heat Pump

To know more about refrigerator, check out:

https://brainly.com/question/26449048

#SPJ4

An applied 25 n force pushes on a 5.0 kg object resting on a frictionless horizontal surface. the force is directed downward at a 20 degree angle is 23.49N

X- component = 25cos20° = 23.49 N

All objects with mass or energy are attracted to one another by gravity, which derives from the Latin word for "weight" (gravitas). By far the weakest of the four fundamental interactions, gravity is 1038 times weaker than the strong interaction, 1036 times weaker than the electromagnetic force, and 1029 times weaker than the weak interaction. As a result, it has no discernible impact on the level of subatomic particles. The motion of planets, stars, galaxies, and even light are all governed by gravity, which is the most important interaction between objects at the macroscopic level.

On Earth, gravity lends weight to physical objects, and the Moon's gravity is what causes sublunar tides in the oceans (the analogous antipodal tide is brought on by the Earth's inertia).

Learn more about force here:

https://brainly.com/question/13191643

#SPJ4

The weight of the larger mass will therefore be 27 kg. When you know the radius, you may use the formula volume = (4/3) r3 to calculate the sphere's volume or mass.

Then, using the formula mass = volume * density, you can calculate the mass by multiplying the volume by the density: mass = volume density. The formula mass = (4/3) r3 density can also be used.

The new radius can be expressed as r + 0.5r = 1.5r if the radius is increased by 50%. As a result, the new volume is 337.5% larger than the original. In other words, the new mass is 337.5% of the old mass.

The new mass will therefore be 27kg.

Furthermore, the area and circumference of the circle grow as the circle's diameter rises.

To know more about weight, visit:

https://brainly.com/question/11244838

#SPJ1

Therefore, the greater mass will weigh 27 kg. When you are aware of the radius, you can determine the volume or mass of the sphere using the formula volume = (4/3) r3.

The mass can then be determined by multiplying the volume by the density using the formula mass = volume*density. It is also possible to apply the formula mass = (4/3)r3 density.

If the radius is expanded by 50%, the new radius may be written as r + 0.5r = 1.5r. The new volume is therefore 337.5% bigger than the old one. The new mass is therefore 337.5% of the original mass.

Therefore, the new mass will be 27kg.

Furthermore, as the circle's diameter increases, so do its surface area and circumference.

To learn more about WEIGHT,

https://brainly.com/question/29698567

#SPJ1

The speed of the sphere is 2√2m/s when its displaces off at 0.400 m .

Mass of a spherical object is 0.100 kg displaced by 0.400m

According to Einstein's equation E=mc2, "mass" is a fundamental characteristic of all the energy that we perceive or feel. If you have any kind of energy, it must have some "mass," according to the equation. It results from the Higgs field's interactions with subatomic particles.

The Higgs interaction gave an object its intrinsic mass, which we refer to as rest mass, if it is not moving in relation to you. As you start to accelerate an object, its kinetic energy rises. In other words, if the kinetic energy is rising, then the energy must be manifesting itself in the form of mass. This is because more energy means more inertia content, which equals more mass.

[tex]V^2-u^2=2as\\\\u=0 \\\\V^2=2as\\[/tex]

Calculations-

[tex]V=\sqrt{0.8\frac{1}{0.100} }[/tex]

[tex]V=\sqrt{\frac{8000}{1000} } \\\\V=\sqrt{8} =2\sqrt{2}m/s[/tex]

To study more on subatomic particles -

https://brainly.com/question/13303285

#SPJ4

Heat flows from the hot fluid to the cold fluid, and the amount of heat transferred is directly dependent on the temperature difference between the two sides.

What is heat exchange?

In a heat exchanger, heat flows from the hot fluid to the cold fluid, and the amount of heat transferred is directly dependent on the temperature difference between the two sides.

In a parallel flow arrangement, the cold inlet and hot inlet are interacting with each other. At that entry point, the temperature difference is wide, and heat transfers quickly.

As the streams pass through the parallel-flow exchanger, they start to approach each other’s temperature. The heat transfer rate drops in line with the reduction in temperature difference.

Now we have the answer to your question. It is impossible for the exit temperature of the cold liquid to exceed the exit temperature of the hot liquid. This is because once the same temperature is reached, all heat transfer stops because there is no temperature difference.

This limitation of parallel flow heat exchangers is the reason most heat exchangers are arranged in counterflow. The counter-flow design results in a higher average temperature difference and greater heat transfer.

Therefore, heat flows from the hot fluid to the cold fluid, and the amount of heat transferred is directly dependent on the temperature difference between the two sides.

To know more about heat exchanger, visit:

https://brainly.com/question/17029788

#SPJ4

The phrase LASER is an acronym of mild Amplification by way of stimulated Emission of Radiation. it's miles a device to provide a sturdy, monochromatic, collimated and tremendously coherent beam of mild. it really works in the phenomenon of 'stimulated emission'.

Laser light is exceptionally monochromatic.

The laser light is a beam of monochromatic mild due to the fact all photons in the laser light have identical power, big hnu = E_2-E_1, identical frequency, large nu = frac{E_2-E_1}{h} and additionally same wavelength, big lambda = frac{hc}{E_2-E_1}.

(ii) Laser light is fairly coherent.

since the emission of all photons are in section, the laser beam is coherent.

(iii) Laser mild is relatively extreme

The depth of laser beam may be very high due to the fact all the photons within the beam are coherent.

(iv) Laser light is highly directional.

A laser beam is fantastically directional. mild from other assets can be made parallel beam by using a lens or a reflect,but the beam divergance is an awful lot more than that for laser light.

Those properties of laser mild enables it for use in surgical treatment and cut via metals.

Learn more about incandescent light here:-https://brainly.com/question/8979272

#SPJ4

The maximum speed of a completely compressed spring is 4.993m/s .

The Mass of spring is 330 kg .

As per Kinetic theory , Molecules of every system is randomly oriented. Every molecule has its own radial and angular components.

As per theory root mean square concept is introduced computing energy leakage of any system.

Zero current in electronics is such an example calculating parameters of dissipation of energy.

[tex]K.E=\frac{3RT}{2} -----[1]\\\\K.E=\frac{mv^2}{2}-----[2] \\\\eq[1]=eq[2][/tex]

comparing

[tex]3RT=mv^2\\\\v^2=3RT/m\\\\T/m=1---[Reason:-compression]\\\\v=\sqrt{3R} \\\\v=\sqrt{3* 8.31} \\=4.993m/s[/tex]

To know about maximum speed-

https://brainly.com/question/15086166

#SPJ4

According to the third rule, a rope's tension remains unaffected if it passes over a pulley. The second rope's second rope's tension in magnitude is W strong (weight of the block).

A force throughout a medium's length is known as tension, particularly a force carried by a flexible medium like a rope or cable. An action-reaction pair of forces acting at each end of the mentioned elements is what is referred to as tension. The greatest size and direction of an object are referred to as its magnitude. Both vector and scalar values use magnitude as a common factor. We know that scalar quantities are those that have magnitude and nothing else by definition.

Whenever a system is in equilibrium,

T1 = F

T1 = mb*G+T2

T2 = F - MG

0R

T2 = W(weight of the block)

Learn more about tension here

https://brainly.com/question/13397436

#SPJ4

Plot B correctly shows the evolution of the universe because it shows a steady/constant incline.

The correct option is B.

Evolution of the universe?

Our universe has been known to begin with an explosion of space itself called the Big Bang. Starting from extremely high density and temperature, space expanded, the universe cooled, and the simplest elements formed. Gravity gradually drew matter together to form the first stars and the first galaxies.

The nature of the universe is such that it underwent several stages of evolution, during its lifetime. These major stages include :

Overall, a steady/constant incline will represent the various steady changes the universe has undergone in its development.

Learn more about the universe at: https://brainly.com/question/805395\

#SPJ1

complete question:

If gravity is the only force that plays a role in the evolution of the universe, and the mass density is less than the critical mass density, which plot correctly shows the evolution of the universe?

Plot A: a curved incline

Plot B: a steady/constant incline

Plot C: a very curved decline

The  density of object is 3.33*10³

The gravitational force draws any two mass-containing objects together. The gravitational force is referred to. According to the formula F=Gm1m2r2, the force will always be applied along the line connecting the two masses in the direction of the other mass. It is a force of attraction in nature.

Given,

gravitational force = 5.00N

Mass of the object = 0.5kg

reading when submerged in water = 3.5 N

The loss in weight = 5 - 3.5

= 1.5 N

This loss in water due to buoyancy in water

Loss in weight of water = weight of displaced water

So ww = 1.5 N

Weight of displaced water = w *v * g

Density of water = 10³kg/m³

Thus  , 1.5=10³ * v* 10

V = 1.5/10³  * 10 m³

Let density be m/v

=0.5/1.5*10*10³

= 3.33*10³

Therefore density of object is 3.33*10³

The complete question is : The gravitational force exerted on a solid object is 5.00 N. When the object is suspended from a spring scale and submerged in water, the scale reads 3.50 N. Find the density of the object.

To learn more about density refer to :

https://brainly.com/question/952755

#SPJ1

If your body has a density of 976 kg/m3, 97% 0f the body will sink while gently floating in fresh water, and 95% will sink if it has a density of 1,030 kg/m3

The net force from buoyancy must match the weight when a body is partially submerged in fresh water. When a body is partially submerged in salt water, the net force due to buoyancy must equal the weight.

Fraction of body submerged (f sub) = density of body/density of fluid

Given that density of fresh water = 1000 kg/m3

density of salt water = 1027kg/m3

density of body = 976 kg/m3

Fraction of body submerged in fresh water = (976/1000)x100 = 97%

Fraction of body submerged in salt water = (976/1027)x100 = 95%

To learn more about density click here https://brainly.com/question/15164682

#SPJ4