Answer:
Fair use is the answer.
Explanation:
In my opinion I think copyright is better for a choice...
50 POINTS Type the correct answer in the box. Spell all words correctly.
What should the timing of transition slides be per minute?
Maintain the flow of the presentation to
slides per minute.
The timing of transition slides during a presentation depends on various factors, such as the purpose of the presentation, the type of content being presented, and the audience's attention span.
What should the timing of transition slides be per minute?The timing of transition slides during a presentation depends on various factors, such as the purpose of the presentation, the type of content being presented, and the audience's attention span. In general, the timing of transition slides should be approximately 1-2 seconds per slide, which translates to about 30-60 slides per minute. This pacing allows the audience enough time to read and understand the content without getting bored or losing interest. However, it's important to remember that the timing should be adjusted based on the complexity of the information being presented and the audience's engagement level. Additionally, it's important to ensure that the timing of transition slides doesn't feel rushed or too slow, as this can impact the overall effectiveness of the presentation.
Learn more about slides in: https://brainly.com/question/20777311
#SPJ1
Write a C++ program that will implement all of the sorting algorithms. The program
should accept different unsorted data items from user and sort using all algorithms and
should tell which algorithm is efficient for that particular unsorted data items.
Which of the following is the purpose of writing an investigation report?
a.To provide the accused with the facts needed to decide the matter.
b.To imprecisely document the investigation conducted.
c.To evidence an impartial institutional response.
d.To best withstand the investigation.
To show that an institution responded impartially. An investigation report is written to give an unbiased account of the investigation that was done, including the facts that were discovered.
What serves as an investigative report's primary objective?As soon as a formal complaint is made or an event happens, a report detailing the results of an investigation is created. Here, the investigators take notes on the pertinent concerns, examine the available data, and draw a conclusion.
What constitutes an investigative report's most crucial section?The most crucial section of an investigation report is the executive summary. In addition, it is the most read. It should paint a clear but succinct picture of the specific allegation or complaint
To know more about institution visit:-
https://brainly.com/question/163262
#SPJ1
stuff = []
stuff.append(1.0)
stuff.append(2.0)
stuff.append(3.0)
stuff.append(4.0)
stuff.append(5.0)
print(stuff)
3. What data type are the elements in stuff?
4. What is the output for print(len(stuff))?
5. What is the output for print(stuff[0])?
Answer:
Explanation:
The given code snippet defines an empty list named "stuff", then appends five float values to it, and finally prints the content of the list. Here are the answers to the questions:
3. The elements in "stuff" are floating-point numbers, specifically 1.0, 2.0, 3.0, 4.0, and 5.0.
4. The output for "print(len(stuff))" would be 5, because the length of the list "stuff" is 5 (i.e., it has five elements).
5.The output for "print(stuff[0])" would be 1.0, because the first element of the list "stuff" (i.e., the element with index 0) is 1.0.
Consider the following Series object, s
Apple 10
Mango 20
Banana 30
Orange 40
i. Write the command which will display only apple.
ii. Write the command to increase price of all fruits by 10.
i. The command to display only apple would be:
s['Apple']
ii. The command to increase the price of all fruits by 10 would be:
s += 10
This will add 10 to each element of the Series object s. The resulting Series object would be:
Apple 20
Mango 30
Banana 40
Orange 50
The command to display only apple would be and The command to increase the price of all fruits by 10 would be.
What is Display command?Only shows the address space you are interested in. On a production system, this command is preferred over the first two because it does not produce such a long list.
Naturally, you must be aware of the name of the address space you are looking for. For all of the servants in a controller, you can display the status of each servant thread on which a request has been dispatched right now, or you can display this thread status for a specific servant in the controller.
Additionally, you can show details about the dispatch threads handling a specific request, the dispatch threads handling the same request for a predetermined period of time, or the dispatch threads handling timed-out requests.
Therefore, The command to display only apple would be and The command to increase the price of all fruits by 10 would be.
To learn more about Command, refer to the link:
https://brainly.com/question/14548568
#SPJ2
I need help with a c# assignment. I am using Visual Studios and need it done with basic c# coding. It is a GUI application.
INSTRUCTIONS
For this assignment, you are required to create the GUI for a timekeeping/payroll system for
CMS.
The system should first allow an employee to enter his name and record the time he worked on
each project for a given week. Using the spreadsheet above as a guideline, the system must
allow the user to enter his name and the name of his supervisor. Next, the user must enter the
number of the week for which he is entering time. Assume a maximum of 52 weeks in a year.
Make sure the employee enters only a valid week number.
To record an employee’s hours, the user must enter the name of a client, a client’s contract, and a
project. For each of the seven days in a week, the user must enter hours worked or check a box
that indicates the day is a weekend, a holiday, or a vacation day. If the employee fails to enter
any hours for a day and fails to check the weekend/holiday/vacation box for that day, the system
should warn the user that the given day is missing information. The system should also ensure
that if any work hours are entered for a day, the checkbox for that day should NOT be checked.
Finally, the system should ensure that a user cannot enter more than 24 hours in a single day.
Once the hours are entered, the user should be able to “Submit” his hours by clicking a button
that will calculate his payroll information for the week and display it on the same screen.
Payroll information is calculated as follows:
All employees are paid for hours worked at a rate of $15 US dollars per hour. If the number of
hours worked in the week exceeds 40, the employee is paid time and a half for his overtime
hours. For example, assume an employee works 50 hours during a week, he will receive (40 X
$15) + (10 overtime hours X (1.5 X $15)) = $825.00. If an employee works less than 40 hours in
a week, the system should make note of this fact in a label beside the supervisor’s name.
1. Create a new Windοws Fοrms Applicatiοn prοject in Visual Studiο.
2. Design the GUI fοr the timekeeping/payrοll system. Add text bοxes, labels, buttοns, and checkbοxes as needed.
3. Write cοde tο validate the user input. Make sure the week number entered by the user is between 1 and 52. Alsο, make sure that the user enters valid wοrk hοurs (between 0 and 24) and checks the apprοpriate checkbοx if they did nοt wοrk that day.
4. Calculate the payrοll infοrmatiοn when the user clicks the "Submit" buttοn. Use cοnditiοnal statements tο determine if the emplοyee wοrked οvertime and calculate their pay accοrdingly.
5. Display the payrοll infοrmatiοn οn the same screen using labels οr text bοxes.
What is GUI?GUI stands fοr Graphical User Interface. It is a type οf user interface that allοws users tο interact with a cοmputer οr sοftware applicatiοn using graphical elements such as icοns, buttοns, text bοxes, menus, and οther visual elements.
To know more about windows visit:
brainly.com/question/27198171
#SPJ9
define the word computer
Answer: an electronic device for storing and processing data, typically in binary form, according to instructions given to it in a variable program.
Explanation: Computer defined
Answer:
A computer is an electronic device that can store, retrieve, and process data. It can perform various operations on the data, including calculations, sorting, and organizing. Computers can run software applications, access the internet, and communicate with other computers. They come in various forms, including desktops, laptops, tablets, and smartphones.
Explanation:
Why data centers are so secure and why is it built?
To prevent any unauthorized breaking into the data center.
It is built to store data from users.
Your organization's data cannot be pasted here. Only 300 characters are allowed.
This error message is informing you that the amount of data you are attempting to paste exceeds the maximum limit of 300 characters.
Explain this error in detail?
Many online platforms and applications have character limits in place to prevent users from entering or pasting an excessive amount of data, which can cause performance issues or make it difficult to read and manage the content.
To resolve this error, you may need to either reduce the amount of data you are trying to paste or find an alternative method for entering or transferring the information.
To learn more about data, visit: https://brainly.com/question/29621691
#SPJ1
Describe the basic internal operation of magnetic hard disc
Explanation:
Magnetic hard disks (HDDs) are a type of storage device used in computers to store data persistently. Here are the basic internal operations of magnetic hard disks:
Platters: The hard disk consists of several circular disks called platters that are made of a rigid material like aluminum or glass. These platters are coated with a thin layer of magnetic material.
Read/Write Heads: Read/Write Heads are small electromagnets that are positioned above and below each platter. The heads move in unison and are attached to a mechanical arm called the actuator. The actuator positions the heads over the appropriate tracks on the platters.
Spindle Motor: The spindle motor rotates the platters at high speed, typically between 5400 and 15000 revolutions per minute (RPM). The faster the RPM, the faster the hard disk can read and write data.
Magnetic Fields: When data is written to the hard disk, the read/write heads create a magnetic field that aligns the magnetic particles on the platters in a specific pattern, representing the data being written.
Reading Data: When data is read from the hard disk, the read/write heads detect the magnetic pattern on the platters and convert it back into digital data. The read/write heads move rapidly over the platters, reading data from multiple tracks simultaneously.
File System: To organize and manage data on the hard disk, a file system is used. A file system keeps track of the location of data on the hard disk, as well as other information such as file names, permissions, and timestamps.
leave a comment
Explain the Police powers- -Suggest scenarios which reflect the acceptable situation between all necessary means without the cause of death and the deadly force.
Answer:
Police powers refer to the legal authority given to law enforcement officers to maintain public safety, prevent crime, and enforce laws. While police officers are allowed to use force to carry out their duties, they are also required to use only the necessary amount of force needed to resolve a situation.
Acceptable situations where police officers may use force without causing death or resorting to deadly force may include scenarios such as:
Arresting a suspect who is resisting arrest: If a suspect is resisting arrest or attempting to flee, police officers may use reasonable force to detain them. This could include using handcuffs or physical force to subdue the suspect, but it should not cause any serious injury or death.
Preventing harm to self or others: In situations where individuals are posing a threat to themselves or others, police officers may use force to prevent harm. For example, if a person is threatening to harm themselves or others, police officers may use non-lethal force, such as pepper spray or a taser, to disarm them and bring them under control.
Controlling violent or dangerous situations: If a situation is violent or dangerous, police officers may use force to control the situation and protect civilians. This could include using non-lethal weapons, such as batons or rubber bullets, to subdue violent or aggressive individuals.
Enforcing laws: In situations where individuals are breaking the law, police officers may use force to enforce the law and bring the situation under control. For example, if a person is engaging in a physical altercation in public, police officers may use force to break up the fight and prevent further violence.
In all of these situations, police officers are expected to use only the necessary amount of force needed to resolve the situation and should avoid causing serious injury or death whenever possible. It is important for police officers to receive proper training in the use of force to ensure they can make sound decisions and use appropriate levels of force when necessary.
Explanation:
What kind of functional dependency table is this? I am thinking 1NF because I saw 2NF in the bottom, but I might be wrong. Please let me know.
The given table suggests that it is in the first normal form (1NF), as there are no recurring groups and atomic values in each column. However judging just by the table, it's unclear if it falls within the 2NF or higher range.
How do you know whether a table is 1NF, 2NF, or 3NF?A relation is in 1NF if it has an atomic value. A relation will be in 2NF if it is in 1NF and all non-key attributes are fully functioning reliant on the primary key.
What is normalisation? What does 1st, 2nd, and 3rd NF mean?The fundamental normal forms used in database normalisation are the first, second, and third normal forms: Each attribute in the connection is atomic, according to the relation's first normal form (1NF). Non-prime qualities must be functionally reliant on the entire candidate key, according to the second normal form (2NF).
To know more about table visit:-
https://brainly.com/question/22736943
#SPJ1
Beverly sells donuts at the local bakery. Donuts cost $.50 each unless customers buy a dozen or more. When customers buy at least a dozen they cost $.40 each. Beverly earns a commission based on her sales performance. Because the bakery makes so much money on beverages, she earns 10% commission (based on the total sale) when a customer buys a drink. She also earns commission on her sales. She earns 2% on each sale that totals more than $10. She earns 1% commission on each sale that totals more than $5 (but less than $10). She does not earncommission on each sale that totals $5 or less (though she will earn the beverage commission). Complete the tablebelow to help Beverly calculate her commission based on the 50 customers she helped this morning.
Please show formulas, thanks!
Answer:
| # of Donuts | Cost of Donuts | Cost of Beverages | Total Sale | Commission |
|-------------|----------------|------------------|------------|------------|
| 1 | $0.50 | $2.00 | $2.50 | 0.00 |
| 6 | $3.00 | $2.00 | $5.00 | 0.00 |
| 12 | $4.80 | $2.00 | $6.80 | 0.68 |
| 18 | $7.20 | $2.00 | $9.20 | 0.92 |
| 24 | $9.60 | $2.00 | $11.60 | 1.16 |
| 30 | $12.00 | $2.00 | $14.00 | 1.40 |
| Total | | | $49.10 | $4.16 |
To calculate the cost of donuts, we can use the following formula:
Cost of donuts = (# of donuts x cost per donut)
To calculate the total sale, we can use the following formula:
Total sale = (cost of donuts + cost of beverages)
To calculate the commission, we can use the following formulas:
Commission for sales over $10 = (total sale x 2%)
Commission for sales over $5 (but less than $10) = (total sale x 1%)
Commission for beverages = (cost of beverages x 10%)
Total commission = (commission for sales over $10 + commission for sales over $5 + commission for beverages)
In which situation does a linear search always perform better than a binary search?
Answer:
Linear search can be suitable for searching over an unsorted array. whereas, Elements in the array need to be in sorted order for binary search. The binary search algorithm uses the divide-and-conquer approach, it does not scan every element in the list. Hence, It is the best search algorithm
pls mrk me brainliest
ASAP! Could somebody tell me the answer to 2.7.6 vacation guides in HTML? Copy and paste it please.
The vacation guide in HTML is given below based on how to navigate a vacation successfully.
The HTML Code<!DOCTYPE html>
<html>
<head>
<title>Vacation Guide</title>
</head>
<body>
<h1>Welcome to our Vacation Guide!</h1>
<p>If you're looking for a perfect getaway, look no further! Our vacation guide offers the best travel tips and recommendations for a memorable vacation.</p>
<h2>Where to Go</h2>
<p>Whether you're looking for a tropical beach, a bustling city, or a scenic mountain view, our guide has you covered. We recommend exploring the stunning beaches of Hawaii, the vibrant culture of New York City, or the breathtaking views of the Rocky Mountains.</p>
<h2>What to Do</h2>
<p>There are endless possibilities for fun and adventure on your vacation. Try surfing, snorkeling, or hiking in Hawaii. Explore the museums, shops, and restaurants of New York City. Or go skiing, snowboarding, or hiking in the Rocky Mountains.</p>
<h2>Where to Stay</h2>
<p>There are plenty of accommodation options to suit your preferences and budget. Choose from luxurious resorts, cozy cabins, or trendy hotels. Our guide provides recommendations for the best places to stay in each destination.</p>
<h2>Conclusion</h2>
<p>With so many options for where to go, what to do, and where to stay, planning your vacation can be overwhelming. But with our vacation guide, you can easily plan a fun, relaxing, and unforgettable vacation.</p>
</body>
</html>
Read more about HTML here:
https://brainly.com/question/11569274
#SPJ1
What does filtering a record do?
A.) It suppress some records and shows others.
B.) It removes records from the document permanently.
C.) It sorts all the data in the record.
D.) It arranges all the information in one column.
Answer:
A) It suppresses some records and shows others.
Explanation:
the digital world is exciting, but like everything else, it has its pluses and minuses. describe one and advantage and one disadvantage of living in a digital world
Answer:
One advantage of living in a digital world is the ease and convenience of accessing information. With the internet, we have access to an abundance of information on virtually any topic, and we can access it from almost anywhere at any time. This can help us learn new things, stay informed about current events, and make more informed decisions.
One disadvantage of living in a digital world is the potential for social isolation and disconnection from the physical world. As we spend more time interacting with screens and devices, we may have less face-to-face contact with other people, which can lead to feelings of loneliness, depression, and anxiety. Additionally, social media and other online platforms can create a false sense of connection and belonging, leading people to prioritize their digital relationships over their real-life ones.
Explanation:
When using the Simple Query Wizard, Kirsten wanted to transfer all of her available data to a new table. She should click on the:
1.) double right-facing arrow.
2.) double left-facing arrow.
3.) single right-facing arrow.
4.) single left-facing arrow.
Answer:
Kirsten should click on the double right-facing arrow in the Simple Query Wizard to transfer all of her available data to a new table.
Explanation:
Why is it necessary for you to know your rights as an employee?
Answer:
It is necessary for employees to know their rights in the workplace in order to protect themselves from any potential abuse or mistreatment from their employers. By being aware of their rights, employees can ensure that they are being treated fairly and can take action if their rights are being violated. Knowing their rights can also help employees to negotiate better salaries and benefits, and to understand the terms of their employment contracts. In some cases, knowing their rights may even help employees to avoid workplace discrimination or harassment. Overall, knowing their rights is an important step towards maintaining a safe and fair work environment.
Explanation:
Codehs decreasing resolution 8.9.4 can someone help me out with this code making this image in a 10x10 pixel grid.
I can provide you with pseudocode to draw the described image on a 10x10 pixel grid.
Write pseudocode for drawing 10x10 pixel grid?
set all pixels to white
draw a black square from (2,2) to (7,7)
draw a black line from (1,1) to (8,8)
draw a black line from (1,8) to (8,1)
Now, let's move on to the questions:
Since the compressed version is not defined, I cannot determine how many fewer pixels it uses or the compression rate.The compresses version is not defined, so I cannot determine if it is recognizable or close enough to the original image.The features of an image that are most visually affected by decreasing the resolution are its details, edges, and fine textures. When the resolution is lowered, these features become more blurry and less distinct, making it more difficult to recognize the image or its components.To learn more about pseudocode, visit: https://brainly.com/question/24953880
#SPJ1
Codehs decreasing resolution 8.9.4
With CodeHS, you can use the setImageURL() method to set the width and height attributes of a picture to the desired values in order to reduce its resolution.
How can I lower an image's resolution in HTML?Using the height and width attributes on the img tag is one of the easiest ways to resize an image in HTML. These numbers define the image element's height and width. The values are entered in pixels, or px, in CSS.
How can you adjust an image's resolution in Javascript?
CreateElement("canvas"); var ctx = canvas. getContext("2d"); / Real resizing of ctx. drawImage(img, 0, 0, 300, 300); / Display resized picture in preview element var dataurl = canvas. / Dynamically build a canvas element.
To know more about CodeHS visit:-
https://brainly.com/question/26099830
#SPJ1
The discovery of electronically stored information has become an important subdiscipline in law and technology. What is this subdiscipline called?
Question 3 options:
Redacting
Transborder Data Flows
Electronic Discovery
Data Retention Program
Question 4 (2 points)
What type of data does this describe, "Information from which the direct identifiers have been eliminated. Indirect identifiers remain intact"?
Question 4 options:
Pseudonymous data
Anonymous data
De-identified data
Redacted data
Answer:
Answer to Question 3:
The answer to question 3 is "Electronic Discovery". The term "Electronic Discovery" (also known as e-discovery) refers to the process of identifying, collecting, preserving, reviewing, and producing electronically stored information (ESI) in response to a legal request or investigation. E-discovery has become an important subdiscipline in law and technology due to the increasing use of digital devices and the internet to create, store, and transmit information. E-discovery specialists and software tools are often used by legal teams to help manage and analyze large volumes of ESI in a cost-effective and efficient manner.
Answer to Question 4:
The answer to question 4 is "De-identified data". De-identified data refers to data that has been stripped of direct identifiers (such as name, address, phone number, social security number, etc.) that could be used to identify an individual. However, indirect identifiers (such as age, gender, occupation, zip code, etc.) may still be present in the data, which could potentially be used to re-identify an individual. De-identified data is often used in research studies and other contexts where the privacy of individuals needs to be protected while still allowing analysis of the data. By removing direct identifiers, the risk of re-identification is greatly reduced, although it is still possible if the indirect identifiers are combined with other available information.
The assessment you are doing lives in the cloud. The program that grades it and saves your score lives in the cloud. Who might need to apply patches to this software? Select three options.
It depends on the operating system you are using. Some operating systems do not do updates.
The vendor that provides the course is responsible for updating its software.
You are responsible for keeping your browser updated if you are using your own computer.
The school is responsible for updating computers in its computer lab if you work at school.
Nobody needs to apply updates to their software. No patches are ever needed.
Answer:
Explanation:The three options that might need to apply patches to this software are:
The vendor that provides the course is responsible for updating its software.
You are responsible for keeping your browser updated if you are using your own computer.
The school is responsible for updating computers in its computer lab if you work at school.
What aspect of web page design allows a web page to work on different screen sizes?
________allows a web page to work on different screen sizes.
Answer:
Responsive web design allows a web page to work on different screen sizes.
Explanation:
Consider this list of numbers: 9 3 6 8 4 7. Why are they not suitable for a binary search?
The proved list of numbers is not suitable for a binary search because the list is not sorted in ascending order.
Binary search is an efficient algorithm for finding an item from a sorted list of items. It works by repeatedly dividing in half the portion of the list that could contain the item, until you've narrowed down the possible locations to just one.
If you take a step back from some of the technical details of this course, and look at the big picture, you will realize that security is not a technical issue, but a business one. How is software security a business issue? Think about it this way, if you had to explain software security to an executive, you would not want to talk about secure methods or if statements. The best security professional is the one who is able to communicate across all groups with very limited "geek" speak.
Because it directly affects the overall wellbeing and success of an organisation, software security is a business issue. Financial losses and reputational harm to the company can come from security breaches.
In the case of a security breach, which of the following activities should a company take?To prevent other servers or devices from becoming infected following a data breach, you should first identify which systems have been compromised and confine them as quickly as you can.
What action should be performed as soon as the data is gathered when a security breach is discovered on a system?Engage IT to audit the impacted systems and determine the precise cause of the issue. Do a risk analysis.
To know more about software visit:-
https://brainly.com/question/1022352
#SPJ1
When selected, the underscore in the Input Mask Wizard is considered a _____
Answer:
In the Input Mask Wizard, when selected, the underscore symbol represents a placeholder for a single character entry. It is considered a wildcard character that matches any valid character that can be entered in that position in the input.
Explanation:
What is a System. Computer
Answer:
A computer system is a set of integrated devices that input, output, process, and store data and information. Computer systems are currently built around at least one digital processing device. There are five main hardware components in a computer system: Input, Processing, Storage, Output and Communication devices.
Azim and his team are invited by a client to attend a group meeting. The client runs a mid-sized financial consulting and auditing firm. The group meeting is about gathering requirements for the new website. The client would like the website to bring the firm more business and make the firm's presence felt in the market. In the meeting, Azim finds that several people are brainstorming and randomly throwing out suggestions. Azim thinks this might confuse his team later regarding which requirements must be met. What can Azim do to gather a confirmed set of requirements from the client group?
A. Note down all suggestions diligently and later select whichever requirements are the easiest to implement. in the
B. Stop the discussion and schedule a one-on-one meeting with each person
C. Determine a central person in the client group, and seek input only from that individual.
D. Let the meeting continue as is, but later speak with the head of the IT department to clarify requirements.
E. Jump into the discussion and brainstorm along with the client team members.
What file name do you use to save your site map?
A. site_map.xml
B. site map.html
C. sitemap.xml
D. document.html
E. document.xml
Answer:
c
Explanation: