PLEASEEE HELP ME
Sulfuric acid is the most produced industrial chemical in the world. The chemical process involves many steps – the final step combines oleum (H2S2O7) with water to produce sulfuric acid (H2SO4). For the first batch of acid production, 1.20 kilograms of oleum is reacted with excess water, and 435 grams of sulfuric acid are produced.
• Write the balanced equation for the formation of sulfuric acid from oleum and water.
• Calculate the theoretical yield of sulfuric acid. Work must be shown to earn credit.
• Calculate the percent yield for the sulfuric acid production. Work must be shown to earn credit
Answer:
Balanced equation: H₂S₂O₇ + H₂O → 2H₂SO₄
Theoretical yield of H₂SO₄: 1322 g
Percent yield for the H₂SO₄ production: 33%
Explanation:
First of all, we determine the balanced equation:
H₂S₂O₇ + H₂O → 2H₂SO₄
Stoichiometry says that 1 mol of oleum reacts to 1 mol of water in order to produce 2 moles of sulfuric acid.
1.20 kg = 1200 g
We convert the grams to moles → 1200 g . 1mol/ 178.12g = 6.74 mol
Ratio is 1:2, so if we have 6.74 mol of oleum we can produce the double of moles of acid. (6.74 . 2) = 13.48 moles of acid.
This is the 100 % yield reaction, or it can be called theoretical yield.
We convert the moles to mass → 13.48 mol . 98g /1mol = 1322 g of acid may be produced.
In the problem, they said we produced 435 g of acid, so let's determine the percent yield.
Percent yield of reaction = (Produced yield / Theoretical yield) . 100
Percent yield of reaction = (435 / 1322) . 100 → 33 %
Give an example of an element which was named as honour to a scientist!!
Explanation:
1) Einsteinium
2) Albert Einstein
Answer:
Einsteinium, Rutherfordium, Nobelium, Curium etc are some examples of elements named after scientists
Which option below will have a charge of negative 3?
A. Two electrons and five protons
B. Two electrons and three protons
C. Five electrons and two protons
D. Three electrons and two protons
Answer:
C
Explanation:
When the electron is greater than proton the atom will be negatively charged.
So, 2-5= -3
Hope this helped you!
Which environmental conditions contribute most to the spread of bacteria?
O A. cold temperatures and low humidity
B. warm temperatures and low humidity
oc, cold temperatures and high humidity
O
D. warm temperatures and high humidity
Density is determined by dividing the __________ of a sample by the __________ of the sample. PLSSSS HELP MEEE!!!
volume; mass
mass; volume
mass; weight
The density of a sample is the ratio of its mass to volume. Thus it is determined by dividing its mass by the volume of the sample. Hence, option b is correct.
What is density?Density of a sample is the measure of its mass per unit volume. It describes how much denser the substance is in a particular volume of the substance. Mathematically it is the ratio of its mass to the volume.
The ratio of density of a substance to the density of water is called its specific gravity. If specific gravity is greater than one then it will sink on water whereas, if it is less than one the substance will float on water.
The density of a substance depends on the mass, volume, bond type, temperature and pressure. Thus, density of a substance vary with difference in temperature or pressure. Density can be expressed in units such as g/ml, g/cm³.
To find more on density, refer here:
https://brainly.com/question/15164682
#SPJ2
If the reaction of 91.3 grams of C3H6 produces a 81.3% yield, how many grams of CO2 would be produced?
Answer:
81.3 a
Explanation:
Just search up answers on wolframalpha.com
What are the relative strengths of intermolecular forces based upon the findings in this activity
Answer:
Dispersion forces are the weakest intermolecular force (one hundredth-one thousandth the strength of a covalent bond), hydrogen bonds are the strongest intermolecular force (about one-tenth the strength of a covalent bond). Dispersion forces < dipole-dipole interactions < hydrogen bonds.
Answer:There are two kinds of forces, or attractions, that operate in a molecule—intramolecularand intermolecular. Let's try to understand this difference through the following example.
Figure of towels sewn and Velcroed representing bonds between hydrogen and chlorine atoms
We have six towels—three are purple in color, labeled hydrogen and three are pink in color, labeled chlorine. We are given a sewing needle and black thread to sew one hydrogen towel to one chlorine towel. After sewing, we now have three pairs of towels: hydrogen sewed to chlorine. The next step is to attach these three pairs of towels to each other. For this we use Velcro as shown above.
So, the result of this exercise is that we have six towels attached to each other through thread and Velcro. Now if I ask you to pull this assembly from both ends, what do you think will happen? The Velcro junctions will fall apart while the sewed junctions will stay as is. The attachment created by Velcro is much weaker than the attachment created by the thread that we used to sew the pairs of towels together. A slight force applied to either end of the towels can easily bring apart the Velcro junctions without tearing apart the sewed junctions.
Exactly the same situation exists in molecules. Just imagine the towels to be real atoms, such as hydrogen and chlorine. These two atoms are bound to each other through a polar covalent bond—analogous to the thread. Each hydrogen chloride molecule in turn is bonded to the neighboring hydrogen chloride molecule through a dipole-dipole attraction—analogous to Velcro. We’ll talk about dipole-dipole interactions in detail a bit later.
hope this helps have a nice night❤️❤❤️
Explanation:
Ninety-five percent of igneous rocks
and metamorphic rocks are below
Earth's surface. Why is this true?
Answer:
This is so cause ...
Igneous rocks are formed when the molten material cools and hardens
and
Metamorphic rocks form when they are subjected to high temperatures and the great pressure of the rock layers above it.
So most of these rocks are found beneath the earth''s crust
(I hope im right... this might not be the perfect answer... but this as close as I can get.. I hope it usefull for u )
The given statement is true because igneous and metamorphic rocks are formed through processes that typically occur deep within the Earth's crust or mantle.
What are igneous rocks ?Igneous rocks are formed from molten magma that cools and solidifies beneath the Earth's surface, while metamorphic rocks are formed from existing rocks that are subjected to intense heat and pressure deep within the Earth.
After their formation, these rocks may remain buried beneath the Earth's surface due to ongoing geological processes such as plate tectonics, where rocks are pushed deeper into the Earth's mantle over time.
Additionally, erosion and weathering can expose rocks at the Earth's surface, but the majority of the exposed rocks tend to be sedimentary rocks rather than igneous or metamorphic rocks.
As a result, the vast majority of igneous and metamorphic rocks remain buried deep within the Earth's crust and mantle, making up the majority of the Earth's crust beneath the surface.
Find more on igneous rocks:
https://brainly.com/question/23555197
#SPJ3
What is the primary intermolecular force the exist between molecules of carbon tetrachloride?
Answer:
Carbon tetrachloride is non-polar and so the only kind of force that can exist is induced dipole.
Which of the following is NOT a way unbalanced forces can cause an object to change its motion?
A. changing the object's direction
B. stop the obect from moving
C. the object's motion stays constant
D. start the object moving
The ocean floor, some parts of which get no sunlight, is the *
Answer:
Aphotic zone
Explanation:
7. Put the following elements in order from smallest to largest atomic radius and explain
why:
C.0, Sn, Sr
Answer:
O, C, Sn, Sr
Explanation:
As per the periodic table trends, atomic radius of an atom deceases from left to right and increases down a group this is so because across a period or from left to right, number of protons increases that increases the nuclear charge and nuclear radius decreases. Down the group, atomic radius increases because energy level increases and distance between nucleus and outermost orbital increases.
The elements in order from smallest to largest atomic radius are:
O, C, Sn, Sr because as per the periodic table trends, oxygen (O) fall into right side of Carbon (C) in the periodic table and Strontium (Sn) and Tin (Sn) fall into down the group where Tin (Sn) is on the right side of Strontium (Sn).
Hence, the correct order is "O, C, Sn, Sr".
A wooden box with a mass of 50 kg in placed on a flat wooden table. What
the horizontal force required to overcome static friction and just cause th
box to slide? us = 0.70 for wood-on-wood. F = uxN
Answer:
is this have picture so I can solve
Please help I will give brainliest!
Answer pls:)
What is the mass of 8.944 x 1018 iron atoms in cg?
What material was added to powdered rock during tuttle and bowen's experiments?
Answer:
water was added to powdered rock
Explanation:
About 55L of a gas in a flexible container is under a pressure of 3.2 atm and at a temperature of 520K. What is the new volume of the gas if the temperature is raised to 760K and the pressure increases to 8.4 atm?
Answer:
30.62 L
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 55 L
Initial pressure (P₁) = 3.2 atm
Initial temperature (T₁) = 520 K
Final temperature (T₂) = 760 K
Final pressure (P₂) = 8.4 atm
Final volume (V₂) =?
The final volume of the gas can be obtained as follow:
P₁V₁ / T₁ = P₂V₂ / T₂
3.2 × 55 / 520 = 8.4 × V₂ / 760
176 / 520 = 8.4 × V₂ / 760
Cross multiply
520 × 8.4 × V₂ = 176 × 760
4368 × V₂ = 133760
Divide both side by 4368
V₂ = 133760 / 4368
V₂ = 30.62 L
Therefore, the new volume of the gas is 30.62 L
dino nuggies dino nuggies dino nuggies
Answer:
i love dino nuggies!!!
Explanation:
there fun
Answer:
shut ur goofy as up
Explanation:
What is the empirical formula of a hypothetical compound that is 96%S and 4% H?
Explanation:
Let the mass of the compound be 100g.
Mass of Sulfur = 96g.
=> Moles of Sulfur
= 96g / (32.07g/mol) ≈ 3
Mass of Hydrogen = 4g.
=> Moles of Hydrogen
= 4g / (1.008g/mol) ≈ 4
Mole ratio of Sulfur to Hydrogen = 3 : 4,
Empirical formula of compound = S3H4.
Empirical formula is the simplest whole number ration of elements in a compound. Molecular formula is n times where n is integers 1,2,... Therefore, S[tex]_3[/tex]H[tex]_4[/tex] is the empirical formula of a hypothetical compound that is 96%S and 4% H.
What is empirical formula?Empirical formula gives the proportion of the element that is present in a compound. It does not give information about the actual number or the arrangements of the atoms.
mass of the compound be 100g.
Mass of Sulfur = 96g.
number of Moles of Sulfur= 96g / (32.07g/mol) ≈ 3
Mass of Hydrogen = 4g.
number of Moles of Hydrogen= 4g / (1.008g/mol) ≈ 4
Mole ratio of Sulfur to Hydrogen is 3 : 4
Empirical formula of compound is S[tex]_3[/tex]H[tex]_4[/tex].
Therefore, S[tex]_3[/tex]H[tex]_4[/tex] is the empirical formula of a hypothetical compound that is 96%S and 4% H.
To know more about empirical formula, here:
https://brainly.com/question/14044066
#SPJ2
C3H8+5O2 --> 3CO2 + 4H2O
If you start with 434 g O2
1. How many grams of C3H8 are needed?
2. How many grams of CO2 form?
3. How many grams of H2O form ?
please show work
Answer:
3, 4 ,1
Explanation:
______ The total number of protons and neutrons in the nucleus.
A. Atomic Number
B. Mass number
C. Atomic mass
And why? I give Brainliest!
Answer:
A. Atomic Number
Explanation:
The mass number is used to calculate the number of neutrons & electrons in one atom of an element. In order to calculate the number of neutrons you must subtract the atomic number from the atomic mass.
Select the correct answer from A, B, C, D & E for each statement given below:
A: Anthracite B: Diamond
C: Carbogen D: Urea E: Lampblack
1. An allotrope of carbon used as a tip for deep boring drills.
2. The type of coal with the highest carbon content.
3. An allotrope of carbon, obtained by burning kerosene oil in a limited supply of air.
4. A nitrogenous fertilizer obtained from carbon dioxide.
5. A compound which finds use for a victim of carbon monoxide poisoning.
Answer:
Didn't know the answer, sorry.
What do scientists do?
A. They make sure all facts fit scientific theories.
B. They make ethical decisions for the government.
C. They learn about the world through observation.
D. They use their knowledge to make public policy.
Scientists learn learn about the world through observation which helps in making scientific theories.
What are observations?
Observations are defined as a set of statements or facts which are recorded while conducting an experiment.Observations are made through sensing changes in the variables of the experiment.
It is specifically defined as an act of knowing or recording the changes in the variables of the experiment.Recording observations holds importance as recording observations avoid the experiment to be repeated over and over again.
It is important to note down observations so that the testing of hypothesis is made easier.There are four types of observations .Observations need to be descriptive and must be written in complete sentences and should include all the numerical data of the experiment.
Learn more about observations,here:
https://brainly.com/question/28041973
#SPJ2
3AgBr + GaPO4 = Ag3PO4 + GaBr3
1. How many grams of Ag3PO4 are produced from the use of 10.0 moles of GaPO4?
2. How many grams of AgBr are needed to produce 12 moles of GaBr3?
3. How many grams of GaBr3 are produced from the reaction of 15 moles of GaPO4?
Answer:
1.mass of Ag3PO4=4185.8g
2.mass of AgBr=6732g
help !!!!!!!!!!!!!!!!!!!
What organelle makes proteins needed to repair damage or direct chemical
processes?
Answer:
ribosome
Explanation:
he ribosome is a cell or vertebrate structure that makes proteins. Proteins are required to direct the functions or functions of many cells, such as repair or chemical processes. The ribosome can be found floating within the cytoplasm or attached to the endoplasmic reticulum.
Given 35.0 grams of aluminum at 22.0 °C. What will be the final temperature of the Al if 300.0 joules of heat energy is added to the Al? (The specific heat of Al is 0.217 cal/g°C)
If 35.0 grams of coal (carbon) burns in 58.5 grams of oxygen gas, how many grams of carbon dioxide can be produced? Describe the steps.
C + O2 → CO2
Answer:
0.59
Explanation:
Is 0.59 because you are dividing 35.0g by 58.5 which will than give you 0.59
Calculate the molarity of a solution prepared by dissolving 13.0 g of Na2CrO4 in enough water to produce a solution with a volume of 800. mL .
Express the molarity to three significant digits.
Answer:
molar mass sodium chromate = 162g
12.6g ÷ 162g/mole = moles sodium chromate (This is the solute)
molalrity or M = moles solute ÷ lliters of solution (You'll have to change given mL to L)
describe Transpiration
Answer:
is the process of water movement through a plant and its evaporation from aerial parts, such as leaves stems and flowers.
Answer:
well in easy terms... its just like the loss of water from the leaves or other parts of a plant due to evaporation
Explanation:
Water is necessary for plants but only a small amount of water taken up by the roots is used for growth and metabolism.