The percentage abundance of 35Cl is 75.77% and the percentage abundance of 37Cl is 24.23%.
Let's say there are two or more different versions of the same element, each with a unique atomic mass but the same atomic number. Isotopes are various versions of the same element with the same atomic number but differing atomic masses.
The information below is provided to us.
Assuming the proportion abundance of Cl-35 to be x%, the atomic mass of chlorine is 35.4527 u, the atomic mass of Cl-35 is 34.9689 u, and the atomic mass of Cl-37 is 39.9659 u.
Cl-37 has an abundance of (100 - x)%.
Average atomic mass, 35.4527 = [tex]\frac{x×34.9689 u+(100−x)×36.9659 u}{100}[/tex]
or, x= 75.77%.
So, abundance of 37Cl = 100% - 75.77 = 24.23%
Hence, the abundances are 75.77% and 24.23%.
To know more about isotopes from the link
brainly.com/question/14220416
#SPJ4
in part 1, sort the orbitals in order of energy, with the lowest-energy orbital at the bottom. then in part 2, consider how many of these orbitals are filled with electrons.
The lowest energy orbital will be closest to the nucleus of an atom. Each and every orbital is filled with electrons in the order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p, and so on.
The lowest energy sublevel always be the 1s sublevel, which consists of one orbital. The single electron of an hydrogen atom will be occupy the 1s orbital when the atoms are in its ground state. As we proceed with atoms with multiple electrons, those electrons are added to the next lowest sublevel: 2s, 2p, 3s, and so on. Orbitals will be ranked in the increasing order of orbital energy as follows: 1s < 2s = 2p < 3s = 3p = 3d <4s = 4p = 4d= 4f.
To now more about lowest energy here
https://brainly.com/question/28609057
#SPJ4
Which of the following represents the overall chemical equation for the reaction and the rate law for elementary step 2
H2(g) + 2ICI(g) = 2HCI(g) + I2(g) is the overall reaction Step 2's rate law is rate = k [HI][ICI]
It is critical to consider not only the chemical properties of the reactants, but also the conditions under which the reaction occurs, the mechanism by which it happens, the rate at which it occurs, and the equilibrium toward which it is progressing in a chemical reaction. The substances that influence the reaction rate are usually one or more of the reactant's side, but products can also be included. Catalysts, which are not included in the balanced chemical equation, can also influence the reaction rate.
For a chemical reaction, the rate law (also known as the rate equation) is an expression that describes the relationship between the rate of the response and the concentrations of the reactants involved.
Learn more about rate law here:
https://brainly.com/question/14779101
#SPJ4
The complete question is:
Step 1:
H2(g) + ICl(g) ----------- HI(g) + HCI(g) (slow)
Step 2:
HI(g) + ICI(g) ------------ HCI(g) + I2 (g) (fast)
Which of the following represents the overall chemical equation for the reaction and the rate law for elementary step 2?
A) The overall reaction is H2(g) + 2 ICI(g) --------- HCI(g) + I2(g); the rate law for step 2 is rate = k[H2] [HI] [ICI]
B) The overall reaction is H2(g) + 2 ICI(g) -------- 2 HCI(g) + I2(g); the rate law for step 2 is rate = K[H2][ICI]2.
C) The overall reaction is Ha(g) + ICI(g) --------- HCI(g) + 1(g); the rate law for step 2 is rate = K-[H2][ICI].
D) The overall reaction is H2(g) + 2 ICI(g) ------- 2 HCI(g) + I2 (g); the rate law for step 2 is rate = [K][HI] [ICI]
calculate the volume of sulfur hexafluoride gas that is collected. you can assume the pressure in the room is exactly 1atm. round your answer to 3 significant digits.
Mols or Temprature was not given so I assumed 70f room and temp.
We know that P = 1 atm, n = number of moles, R = 8.314 J/mol*K and T = (70 + 459.67)*5/9 = 527.67K (converting the temperature from Farrenheight to Kelvin)
so, V = (nRT)/P
Therefore, we need the moles of sulfur hexafluoride gas to calculate the volume. Without the moles of the gas, it is impossible to determine the volume of the gas.
treatment of the following stereoisomer of 1-bromo-1,2-diphenylpropane with sodium ethoxide in ethanol gives a single stereoisomer of 1,2-diphenylpropene. draw the e2 elimination product of the reaction. take into account that the starting stereochemistry affects the resulting double bond stereochemistry.
Take into account that the starting stereochemistry affects the resulting double bond stereochemistry.
Define stereoisomer ?
Stereoisomers. Generally defined, stereoisomers are isomers that have the same composition (that is, the same parts) but that differ in the orientation of those parts in space. There are two kinds of stereoisomers: enantiomers and diastereomers.Stereoisomers have the same molecular formula and chemical bonds but they have different spatial arrangements. Stereoisomers can be subdivided into two parts that are configurational and conformational isomers.Stereoisomers occur as a result of the different relative orientations of distinct groups of molecules that are connected to a central core. R-Thalidomide and S-Thalidomide are an example of stereoisomers.
To learn more about stereoisomer refers to:
https://brainly.com/question/17366745
#SPJ4
Heating Curve Question. I tried to be very deliberate solving this problem, but none of my answers - +50, -50, +49.6, etc. - were accpeted and I've just been stuck on this question for a few days. Any help is appreciated, thanks : )
Answer:
It sounds like the writer's experiences of scouting have had a profound impact on his life. He values the connection with nature and the skills he learnt, as well as the importance of preserving the environment for future generations. He also mentions the words and phrases associated with scouting, which he says can act as a reminder of the experience and the joy he felt during his time in the Scouts. It's clear that the writer values the experiences of scouting and has a strong appreciation for the outdoors.
the reaction of 2,2-dimethyl-1-propanol, also known by the common name neopentyl alcohol with hbr gives 2-bromo-2-methylbutane as the major product. giving the structures of the reactant and the product of the reaction, show mechanistic explanation for the product of the reaction.
The reaction of 2,2-dimethyl-1-propanol, also known as the neopentyl alcohol with HBr gives 2-bromo-2-methylbutane as the major product. It is a SN₁-mechanism.
Neopentyl alcohol is a primary alcohol, but the bulky group has hindered it. The backside attack is not possible, so instead of the SN₂ mechanism SN₁ followed to get the desired rearranged product. The reaction will forms a rearranged stable carbocation from the primary carbocation to the tertiary carbocation.
Protonation of the Neopentyl alcohol will converts the hydroxy group into a good leaving group. Water will leaves form a primary carbocation rearranged through the methyl shift, which is thus forming a stable tertiary carbocation. Bromide ion will also attacks the carbocation to form a product 2-bromo-2-methylbutane. Mechanism will showing the formation of 2-bromo-2-methylbutane.
To know more about carbocation here
https://brainly.com/question/14147603
#SPJ4
In the context of a drug misuse, match the types of chemicals (in the left column) with the corresponding definitions of misuse (in the right column)
As in the context of drug misuse, the following chemical types are linked to their corresponding definitions of misuse:
"Prescription drugs" should be matched with "use of drugs in greater amounts than, or for purposes other than, those prescribed by a physician or dentist." "Nonprescription drugs or chemicals" should be matched with "any use other than the use intended by the manufacturers of those chemicals."Drug misuse refers to the incorrect or harmful use of a substance, including prescription and over-the-counter drugs, as well as illegal drugs. This can include taking a higher dose than prescribed, using someone else's medication, using a drug for non-medical purposes, or combining drugs in a way that is dangerous. Drug misuse can lead to negative health consequences and may also contribute to the development of a substance use disorder.
Prescription drugs (not in the context of misuse) are medications that are prescribed by a healthcare professional and are intended for use in the treatment of a specific medical condition.
Nonprescription drugs, also known as over-the-counter (OTC) drugs, (not in the context of misuse) are substances that are available for purchase without a prescription. They are used to treat common health issues, such as pain or a headache, but can also be abused. Chemicals refer to any substance, whether natural or man-made, that can be used for a specific purpose, including but not limited to drugs.
Learn more about drug abuse here: brainly.com/question/1189815
#SPJ4
Complete the following statement: Oxygen is a reactant of _____(1)_____ while being the product for _____(2)_____. (4 points)
a
(1) photosynthesis, (2) fermentation
b
(1) cellular respiration, (2) photosynthesis
c
(1) fermentation, (2) anaerobic respiration
d
(1) aerobic respiration, (2) photosynthesis
Please will give brainly!!!
Oxygen is a reactant of cellular respiration while being the product for photosynthesis.
What is photosynthesis?
It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy through the process of cellular respiration.
Some of the energy which is converted is stored in molecules of carbohydrates like sugar and starches which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.
Learn more about photosynthesis,here:
https://brainly.com/question/29764662
#SPJ1
The release of which substance is represented by the arrows?
The arrows depict the substance's carbon dioxide emission.
By substance, what do you mean?A substance is a material that has specific qualities and a specific composition. A substance is any unadulterated element or pure composite. By using any physical technique, a substance cannot be separated. A pure substance has fixed properties/composition. Iron and sugar are two examples of substances.
An illustration of a materialMatter with a definite composition and set of characteristics is referred to as a substance. A substance is every pure element. It is a material when it is pure. Substance examples: Because iron is an element, it is also a substance. Methane is both a material and a compound.
To know more about Material visit:
https://brainly.com/question/28646672
#SPJ1
3. For the carbon in the structure shown, determine the followi
H
(a) Hybridization:
(b) Molecular shape_
(c) Number of electron domains:
(d) Bond Angle:
The carbon that is SP2 hybridized in the compound is carbon 4 (C4).
What is the hybridization?When we talk about the hybridization of the carbon atom, we mean the fact that the orbitals that are in the carbon atom are mixed in such a way that the orbitals that have the appropriate energy to be able to participate in the chemical bonds are formed.
As such looking at the compound that we have been shown in the image, we can see that not all the carbon atoms would be at the same state of hybridization.
Learn more about hybridization:https://brainly.com/question/14140731
#SPJ1
fill in the blank. last word if a government wants to efficiently reduce a widespread negative externality like air pollution, it must know the costs of pollution abatement of the individual polluters. however, this information is difficult to obtain directly. tradeable emissions permits are one way to solve the asymmetric information problem affecting pollution abatement efforts. fill in the blanks to explain how this is possible.
If a government wants to efficiently reduce a widespread negative externality like air pollution, it must know the costs of pollution abatement of the individual polluters.
a. lower, higher
b. lower, lower
The term "abatement costs" refers to the expenses incurred by a company or organization when it becomes necessary to get rid of any unwelcome annoyances or unfavorable byproducts of the production process. It is the cost associated with removing a harmful externality, such as pollution that has an adverse environmental impact.
As tradable emissions permits are available, organizations with lower abatement costs can sell them to companies with higher abatement costs in order to address the issue of pollution abatement costs.
The firm that sold the permit would have lower abatement costs and the negative externality is also lowered at the lowest cost achievable if the firm still had to cut its pollution output after selling.
Learn more about Harmful here:
https://brainly.com/question/16747083
#SPJ4
If a government wants to efficiently reduce a widespread negative externality like air pollution, it must know the costs of pollution abatement of the individual polluters. However, this information is difficult to obtain directly. Tradeable emissions permits are one way to solve the asymmetric information problem affecting pollution abatement efforts.
a. Because the permits are tradeable, firms with ___ abatement costs will sell some of their permits to firms with ___ abatement costs.
Now consider that even after a firm has sold its permits, it must still reduce its pollution output.
b. Since those who sell their permits would have ___ abatement costs, the negative externality is reduced at ___ possible cost to society.
how many moles are in 977 grams of HgSO4
There are 3 moles of HgSO4 in 977 grams of HgSO4.
To calculate this, we need to use the molar mass of HgSO4.
Molar mass of HgSO4 = 271.5 g/mol
hence, 977 g / 271.5 g/mol = 3.6 moles of HgSO4.
What is molar mass?
Molar mass is a physical property of a substance and is measured in grams per mole (g/mol). It is the mass of one mole of a substance and is equal to the sum of the relative atomic masses of all the atoms in a molecule. Molar mass is important in chemistry and is used to calculate the mass of a given number of moles in a substance or solution. It is also used to calculate the mass of a given volume of a substance, such as when calculating the molarity of a solution. Knowing the molar mass of a substance is useful for many calculations, like determining the number of moles in a given mass, or the mass of a given number of moles.
Therefore, There are 3 moles of HgSO4 in 977 grams of HgSO4.
To learn more about molar mass
Here: https://brainly.com/question/837939
#SPJ1
Sharla finds a container labeled tungsten. She removes the metal and weighs it and determines the mass is 377.64 grams of tungsten. How many moles of
TuneSten did she one?
Sharla finds a container labeled tungsten and Sharla found 2.05 moles of tungsten in the container.
What is moles of a substance?Mole is the amount of substance of a system that contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12 and its symbol is “mol”. One mole of substance is equal to the value of 6.023 x 10^23 (Avogadro's number). It can be used to measure the products obtained from chemical reaction.
As, number of moles is mass / molar mass
so, molar mass of tungsten is 183.84 g/mol.
the number of moles of tungsten that Sharla found would be:
number of moles = 377.64 g / 183.84 g/mol = 2.05 mol
Therefore, Sharla found 2.05 moles of tungsten in the container.
To know more about moles of substance, refer
https://brainly.com/question/14357742
#SPJ1
question mode multiple choice question which one of the following irreversibilities describes the force that opposes the relative motion between two bodies in contact with one another? multiple choice question. friction heat transfer chemical reactions mixing of two fluids
The force that resists the relative motion of two bodies is referred to as irreversibility. Examples of this include chemical reactions, mixing two fluids, and electrical resistance.
Why do we use the term "chemical"?
Any material with a known composition is a chemical. To put it another way, a chemical always consists of the same "substance." There are some substances in nature, like water. Chlorine and other chemicals are made at factories.
What instances from chemistry?
All of these things are made of chemical, some natural and others synthetic, including air, water, iron, fuel, clothes, stone, equipment, plastics, plants, and food. Chemicals can be made up of several different chemicals or they can be specific chemical molecules like water. Ammonia, oxygen, water, carbon dioxide, and other substances are all present in air.
To know more about chemical visit:
https://brainly.com/question/292401834
#SPJ
The a of a monoprotic weak acid is 0.00839. What is the percent ionization of a 0.199 M solution of this acid?
The percent ionization of the acid is obtained as 21%.
What is the percent ionization?We know that a weak acid is said to be the kind of acid that is not able to ionize completely in solution. The implication of this is that we are still going to have some of the acid that have not be ionized in the system at the end of the reaction.
We know that;
α = √Ka/Co
α = Percent ionization
Ka = acid dissociation constant
Co = Initial concentration
Hence, we have;
α = √0.00839/0.199
= 0.21 or 21%
Learn more about percent dissociation:https://brainly.com/question/16848897
#SPJ1
NEED HELP ASAPPPPPPP
A color's degree of purity is measured by intensity, commonly referred to as saturation or chroma. While a low-intensity color is more muted or neutral, a very intense hue is dazzling.
What adjectives best characterize a color's intensity?A color's brightness or dullness is determined by its intensity, often known as chroma or saturation. The intensity of a color is maximum when it is displayed on a color wheel (bright). It turns boring when used with white, gray, or black. When blended with their complement, colors also lose intensity (the opposite color on the wheel).A color's degree of purity is measured by intensity, commonly referred to as saturation or chroma. While a low-intensity color is more muted or neutral, a very intense hue is dazzling.A color's degree of purity is measured by intensity, commonly referred to as saturation or chroma.The complete question is,
What is a hue that is quite intense?
To learn more about color's intensity refer to:
https://brainly.com/question/1366347
#SPJ1
Ketamine sometimes used as an adjuvant to general anesthesia, is available as a 10.0%(w/v) solution. Calculate the mass of ketamine in 2.50 ml of this solution.
Answer:
0.25 grams
Explanation:
mass = (concentration x volume) / 100
The concentration of ketamine is 10.0%w/v and the volume is 2.50 ml.
mass = (10 x 2.50) / 100
mass = 0.25 g
So, there is 0.25 grams of ketamine in 2.50 ml of a 10.0% (w/v) solution.
which of the following statement is false? which of the following statement is false? water is the most abundant atom. water is essential for life. water is polar. water stabilizes temperature.
Water is the most abundant atom is a false statement.
Water molecule is composed of two hydrogen atoms and one oxygen atom. Water is necessary for the survival of living organisms. Water is polar because the oxygen atom in water has a higher electronegativity than the hydrogen atoms, resulting in a partial negative charge on the oxygen atom and partial positive charges on the hydrogen atoms.
Water stabilizes temperature because it has a high heat capacity, meaning it can absorb or release a large amount of heat without experiencing a significant change in temperature. This allows it to act as a temperature buffer, helping to maintain a relatively stable temperature in living organisms and in the environment.
Learn more about Water Molecule here: https://brainly.com/question/18725854
#SPJ4
MS-PS1-6: While working in the chemistry lab, you dissolve 2.5g of sodium
hydroxide chips into a beaker containing 50mL of water. As you pick up the beaker
to add it to a separate solution, you notice the outside of the beaker is very warm.
What explains this rise in temperature?
4
50mL of water and 2.5g of sodium hydroxide chips should be dissolved together in a beaker. Because to the increase in temperature Solid sodium hydroxide dissolves in water in an exothermic reaction reaction that releases a significant quantity of heat.
Explain the reaction of sodium hydroxide with water?Whenever sodium hydroxide (NaOH) reacts with water, sodium ions (cations) with a positive charge and hydroxide ions with a negative charge separate out (anions).
Although cations and anions typically surround cations more tightly and vice versa, these ions move freely and independently of one another in the water.
NaOH easily absorbs moisture as well as carbon dioxide through the air because to its high water solubility.Solid sodium hydroxide dissolves in water in an extremely exothermic reaction that releases a significant quantity of heat.The following response is being thought about:NaOH(s) + H2O(l) => Na+ + OH- + H20 + HEAT
This is the sodium hydroxide dissolving in water, not a reaction. You must ascertain the solvation's enthalpy, Hsol. Due to the exothermic nature of the process, this is bad.You must be aware that Na+ and OH- interact ionically.Since, you've solubilized NaOH, the Na+ cations and OH- ions have strong interactions with the oxygen and hydrogen atoms in the water. This is a substance's disintegration.
To know more about the sodium hydroxide, here
https://brainly.com/question/13041783
#SPJ1
A freshener is the best choice of tonic lotion for mature or __ skin?
Explain how to use molecular shapes to predict molecular polarity
An molecule is polar if the lengths of the arrows differ and they not balance each other.
What is the straightforward meaning of a molecule?Pay close attention to the sound. the smallest part of a molecular that includes both its physical and chemical properties pronounced (MAH-leh-kyool). Molecules are made up of one or more electrons.
Water: A Molecular or Not?Molecules are created when atoms come together. Two hydro (H) ions and one oxygenation (O) atom make up the three atoms that make up a water molecule. Because of this, water is occasionally abbreviated as H2O. There are trillions of water molecules in a single drop of liquid.
To know more about molecule visit:
https://brainly.com/question/16900319
#SPJ4
28. You mix 500 mls of 7.5% Travasol and 500 mls of 60% dextrose
solution and 300 mls of Sterile Water for Injection. What are the
percentage strengths of the Travasol and dextrose in the mixed
solution?
This is pharmacy math.
Prior to administration, Dextrose Injection must be diluted with other compatible intravenous fluids or used as an admixture with amino acids.
What does 5% dextrose and water do?Dehydration, insulin shock, and low blood sugar (hypoglycemia) are all treated with 5% dextrose in water (fluid loss). For individuals who are unable to eat due to illness, accident, or another medical condition, dextrose 5% in water is also administered.
A sterile fluid called dextrose injection is used to give your body more water and carbohydrates (calories from sugar). When a patient is unable to consume enough fluids or when more fluids are required, it is used. For intravenous infusion as a source of carbohydrates, the treatment of insulin hypoglycemia, and other disorders, people utilise dextrose saline infusion.
It functions by raising blood glucose levels in hypoglycemic patients and offering a source of carbohydrate calories when necessary.
To learn more about Dextrose Injection refer to :
https://brainly.com/question/29382250
#SPJ1
chromium and cadmium can be removed from wastewater by treatment with sodium hydroxide. show the net ionic reactions of cr3 (aq) with naoh(aq) and cd2 (aq) with naoh(aq).
The following are the net ionic processes for removing chromium (III) and cadmium from wastewater using sodium hydroxide: Sodium hydroxide with chromium (III): Cr3+(aq) + 3NaOH(aq) -> Na3Cr(OH)3.
Cadmium in the presence of sodium hydroxide: Cd2+(aq) + 2NaOH(aq) -> Na2Cd(OH)2. Metal ions react with hydroxide ions in both processes to generate insoluble metal hydroxide precipitates that can be readily removed from the solution. Precipitation is a treatment method that is excellent for removing heavy metal ions from wastewater.chromium and cadmium can be removed from wastewater by treatment with sodium hydroxide. show the net ionic reactions of cr3 (aq) with naoh(aq) and cd2 (aq) with naoh(aq).The following are the net ionic processes for removing chromium (III) and cadmium from wastewater using sodium hydroxide: Sodium hydroxide with chromium (III): Cr3+(aq) + 3NaOH(aq) -> Na3Cr(OH)3.
learn more about hydroxide here:
https://brainly.com/question/4251554
#SPJ4
a layer of mineral oil is poured on top of a layer of ethylene glycol and a piece from a board game is placed at rest with its midpoint in line with the boundary between the two layers, as shown. the piece remains at rest because the density of the sphere is greater than the density of mineral oil and less than the density of ethylene glycol. earth, the mineral oil, and the ethylene glycol exert forces on the piece with magnitudes fearth , fmineraloil , and fethyleneglycol , respectively. which of the following, where the dot represents the piece, correctly identifies the direction and relative magnitude of these forces?
The earth's force would be applied to the object (the earth) in a downward direction, toward the planet's centre. The force that the mineral oil would apply to the object (fmineraloil) would be directed
Mineral oil is a liquid that is produced from petroleum and is transparent, colourless, and odourless. It frequently appears in a wide range of consumer and industrial goods, including lubricants, fuels, cosmetics, and personal care products. Mineral oil functions as a moisturiser and occlusive agent in cosmetics and personal care products, helping to stop water loss from the skin. In several applications for food processing, it is also utilised as a lubricant. Despite its extensive use, certain questions have been raised regarding mineral oil's possible negative effects on health, particularly when it is used in cosmetics and personal care items. According to certain research, regular use of products containing mineral oil may cause skin irritation and blocked pores. But there is conflicting da
Learn more about Mineral oil here:
https://brainly.com/question/12899264
#SPJ4
One of the main properties of covalent bonds is that they form
O a. weak
O b. strong
O c. metallic
d. ionic
bonds.
Electrons from both participating atoms are distributed equally to create a covalent bond.
In this case option B is correct.
Covalent bonds: how are they created?
The shared pair or bonding pair is the name for the electron pair that makes up this kind of bonding. Extremely high ionization energy elements cannot accept electrons, and equally, extreme low electron affinity elements cannot transmit electrons.The atoms of these elements frequently exchange electrons with other atoms of the same element or with atoms of other elements in order for both atoms to achieve stability.Bonds between objects of different or similar types that share electron pairs are known as covalent bonds. When two atoms trade one or more pairs, a covalent bond is created.To learn more about covalent bond refer to :
brainly.com/question/3447218
#SPJ1
A ball leaves a girl's hand with an upward velocity of 6 meters per second. What is the maximum height of the ball above the girl's hand?
The maximum height that is attained by the ball that leaves the hand is 1.8 m.
What is the maximum height?We know that we can be able to use the equation of the motion of a body that occurs under gravity to be able to obtain the maximum height that has been attained by the ball as it is leaving the hand of the girl.
We would then have that;
v^2 = u^2 - 2gh
v = final velocity
u = initial velocity
g = acceleration due to gravity
h = height of the ball
If v = 0 m/s at the maximum height
u^2 = 2gh
h = u^2/2g
h = (6)^2/2 * 9.8
h = 36/19.6
h = 1.8 m
Learn more about maximum height:https://brainly.com/question/11535666
#SPJ1
Question 9 (1 point)
Which of the following correctly expresses the relationship between frequency and wavelength. Use the diagram below to help you.
a
Frequency increases as wavelength decreases (gets shorter)
b
Frequency and wavelength are unrelated.
c
Frequency is equal to wavelength.
d
Frequency decreases as wavelength increases (gets longer)
The statement that correctly expresses the relationship between frequency and wavelength is as follows: Frequency increases as wavelength decreases i.e. gets shorter (option A).
What is wavelength?Wavelength is the length of a single cycle of a wave, as measured by the distance between one peak or trough of a wave and the next.
The wavelength is often designated in physics as λ, and corresponds to the velocity of the wave divided by its frequency.
Frequency and wavelength are inversely proportional to each other. The wave with the greatest frequency has the shortest wavelength and vice versa.
Therefore, option A is correct.
Learn more about wavelength at: https://brainly.com/question/12924624
#SPJ1
The air pressure inside a submarine is 0.62 atm. What would be the height of a column of mercury balanced by this pressure?
The height of a column of mercury balanced by 0.62 atm pressure is 471.2 mmHg.
What is pressure ?
Pressure is defined as the force applied perpendicular to an object's surface per unit area over which that force is distributed. Gauge pressure is the pressure in relation to the surrounding atmosphere. Pressure is expressed using a variety of units.
The standard air pressure in a mercury-containing vessel keeps the mercury level grown up to 760 mm higher
It is relatively similar to the force from the weight of that column in the vessel.
Given:
0.62 atm air pressure - inside a submarine,
mercury level at 1 atm = 760 mmHg
The height of the column of mercury balanced by this pressure is as follows:
= 0.62 × 760 mmHg
= 471.2 mmHg
Thus, the height of a column of mercury balanced by 0.62 atm pressure - 471.2 mmHg
To learn more about the pressure, follow the link:
https://brainly.com/question/12977546
#SPJ1
The bones of a saber-toothed tiger are found to have an activity per gram of carbon that is 15.0 % of what would be found in a similar live animal. How old are these bones? Give answer in years. Do not enter unit.
The bones are 16925 years old.
The process of carbon dating involves counting the amount of the radioactive isotope carbon-14 that is present in a sample. As carbon-14 breaks down into nitrogen-14 over time, less of it is present. Scientists can determine how recently an organism died by calculating the ratio of carbon-14 to carbon-12 in a sample. Now to know the age of the bones we must directly use the radioactive decay law: d N d t ∝ N
Where the rightmost part of the equation comes from the statement that the activity found is just 15.0% of the activity that would be found in a similar live animal. This means that the number of carbon-14 atoms is just 15.0% of what it was at the moment the saber-toothed tiger died.
To know more about saber-toothed tiger:
https://brainly.com/question/24330911
#SPJ4
Consider the composition. information from the SDS. What is a possible name of this compound?
A. Glycine
B. Glycol
C. Glycogen
D. Glycerol
Answer: B
Explanation: