Cementation is part of the process of
A. igneous intrusion
B. lithification
C. igneous extrusion
D. metamorphism
SUBMIT

Answer:

In carbon dioxide, on the right, there is 2.666 g of oxygen for every gram of carbon. So the ratio of oxygen in the two compounds is 1:2, a small whole number ratio

please mark me as the brainliest answer and please please pleaseeee follow me.

Answer:

The concentration of chloride ion is [tex]2.82\times10^{-3}\;mol/L[/tex]

Explanation:

We know that 1 ppm is equal to 1 mg/L.

So, the [tex]Cl^-[/tex] content 100 ppm suggests the presence of 100 mg of [tex]Cl^-[/tex] in 1 L of solution.

The molar mass of [tex]Cl^-[/tex] is equal to the molar mass of Cl atom as the mass of the excess electron in [tex]Cl^-[/tex] is negligible as compared to the mass of Cl atom.

So, the molar mass of [tex]Cl^-[/tex] is 35.453 g/mol.

Number of moles = (Mass)/(Molar mass)

Hence, the number of moles (N) of [tex]Cl^-[/tex] present in 100 mg (0.100 g) of [tex]Cl^-[/tex] is calculated as shown below:

[tex]N=\frac{0.100\;g}{35.453\;g/mol}=2.82\times 10^{-3}\;mol[/tex]

So, there is [tex]2.82\times10^{-3}\;mol[/tex] of [tex]Cl^-[/tex] present in 1 L of solution.

Answer:

The correct answer is 146 g/mol

Explanation:

Freezing point depression is a colligative property related to the number of particles of solute dissolved in a solvent. It is given by:

ΔTf = Kf x m

Where ΔTf is the freezing point depression (in ºC), Kf is a constant for the solvent and m is the molality of solution. From the problem, we know the following data:

ΔTf = 1.02ºC

Kf = 5.12ºC/m

From this, we can calculate the molality:

m = ΔTf/Kf = 1.02ºC/(5.12ºC/m)= 0.199 m

The molality of a solution is defined as the moles of solute per kg of solvent. Thus, we can multiply the molality by the mass of solvent in kg (250 g= 0.25 kg) to obtain the moles of solute:

0.199 mol/kg benzene x 0.25 kg = 0.0498 moles solute

There are 0.0498 moles of solute dissolved in the solution. To calculate the molar mass of the solute, we divide the mass (7.27 g) into the moles:

molar mass = mass/mol = 7.27 g/(0.0498 mol) = 145.9 g/mol ≅ 146 g/mol

Therefore, the molar mass of the compound is 146 g/mol

Answer:

It's a representative metal

Explanation: Transitional metals are metals of various chemical elements and have valence electrons—i.e., electrons that can participate in the formation of chemical bonds.

Answer:

The orange-and-white clownfish you know from Hollywood is only one of 30 species of clownfish that live in coral reefs around the world; small in size and big in personality, these tiny comedians have one of the most unique lifestyles in the reef. The orange-and-white clownfish you know from Hollywood is only one of 30 species of clownfish that live in coral reefs around the world; small in size and big in personality, these tiny comedians have one of the most unique lifestyles in the reef.

Explanation:

point being, it would be absolutely terrible

Coral reef are the biggest biodiversity in the world. Therefore, destruction of coral reefs definitely affect the aquatic livings. As well as it leads to erosion of seashore lines.

Corals reefs are the habitat of 25% of sea organisms. It means there are well over a million species that rely on coral reefs for their existence. The reef offers these organisms the vital food, habitat, and breeding grounds required for the survival of their species.

The marine biodiversity would suffer greatly if their homes vanished. And many fish, turtles, and other species would vanish in a domino-like fashion.

Coral reefs are threatened by a number of things, such as local threats like overfishing, destructive fishing methods, coastal development, pollution, and careless tourism, as well as global effects of climate change like warming seas and rising CO₂ levels in the water. Natural phenomena like hurricanes, El Nio, and diseases are also a threat to oral reefs.

Find more on coral reefs:

https://brainly.com/question/364711

#SPJ6

Answer:

D. Electrons: Negative.

Explanation:

Hello, happy to help you today!

In this case, by considering the Bohr's atomic model in which atom is composed by a nuclei containing both protons and neutrons which are positively and neutrally charged respectively and surrounding electrons assembled in orbits or levels of energy which are negatively charged in order to provide a balance to the atom, the correct statement is: D. Electrons: Negative. Also consider the Bohr's model on the attached picture.

My best regards to you!

Answer:

False

Explanation:

It is the other way round, a black object appears black because it absorbs all the wavelength of light and does not reflect any light.

Answer:

plucking is usually extracting hair

Explanation:

example: pluck the chicken feathers

pluck my brows

Answer:

k Nishant

Explanation:

i don't know sorry but u can search in google

Answer:

Elements are the simplest complete chemical substances. Each element corresponds to a single entry on the periodic table. An element is a material that consists of a single type of atom. Each atom type contains the same number of protons.

Chemical bonds link elements together to form more complex molecules called compounds. A compound consists of two or more types of elements held together by covalent or ionic bonds.

Explanation:

Answer:

P₄(l) + 5 O₂(g) + 6 H₂O(l) ⇒ 4 H₃PO₄(aq)

Explanation:

Phosphoric acid is synthesized using a two-step thermal process.

In the first step, phosphorus and oxygen react to form diphosphorus pentoxide. The corresponding chemical equation is:

P₄(l) + 5 O₂(g) ⇒ 2 P₂O₅(g)

In the second step, diphosphorus pentoxide and water react to form phosphoric acid. The corresponding chemical equation is:

P₂O₅(g) + 3 H₂O(l) ⇒ 2 H₃PO₄(aq)

We can get the net chemical equation by adding the first step, the second step multiplied by 2, and canceling what is repeated on both sides.

P₄(l) + 5 O₂(g) + 2 P₂O₅(g) + 6 H₂O(l) ⇒ 2 P₂O₅(g) + 4 H₃PO₄(aq)

P₄(l) + 5 O₂(g) + 6 H₂O(l) ⇒ 4 H₃PO₄(aq)

Answer:

geosphere

Explanation:

geo means rocks this is the area

hope this helps dude

Answer:

10 moles of water are produced,

Explanation:

Given data:

Moles of H = 10 mol

Moles of O = 6 mol

Water obtained = ?

Solution:

Balance chemical equation:

2H₂ + O₂    →    2H₂O

Now we will compare the moles of H₂ and O₂ with water from balance chemical equation.

                            H₂             :          H₂O

                             2              :            2

                             10             :           10

                            O₂             :          H₂O

                             1              :            2

                             6             :           2×6 = 12

Number of moles of water produced by hydrogen are less so hydrogen will be limiting reactant and it will limit the yield of water thus, 10 moles of water are produced.

Answer:

An element is atoms with the same number of protons.

Explanation:

Protons, electrons, and neutrons.

Answer:

Explanation:

The percentage error of a certain measurement can be found by using the formula

[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]

From the question

actual density = 19.30g/L

error = 20.9 - 19.3 = 1.6

We have

[tex]p(\%) = \frac{1.6}{19.3} \times 100 \\ = 8.290155440...[/tex]

We have the final answer as

Hope this helps you

Answer:

1 Faraday

Explanation:

This question seeks to test proper understanding of Faraday's second law of electrolysis which states when the same quantity electricity passes through a solution of different electrolytes, the mass of the substance deposited is directly proportional to there chemical equivalence.

This law hints at the charges of ions being the chemical equivalence and also been represented as the unit for the quantity of electricity in faraday, F. Hence, a metal with the charge of 1+ can be displaced by 1F (which is equal to 96, 500 coloumbs). This charge also represents one molecule of electron, thus 1 faraday corresponds to one mole of electrons.

NOTE: It should be noted that a metal with the charge of 2+ can be displaced by 2F and so on.

Answer:

Ca(ClO₃)₂(s)      →      CaCl₂(s) + 3O₂(g)

Explanation:

Chemical equation:

Ca(ClO₃)₂(s)      →      CaCl₂(s) + O₂(g)

Balance chemical equation:

Ca(ClO₃)₂(s)      →      CaCl₂(s) + 3O₂(g)

Step 1:

Ca(ClO₃)₂(s)      →      CaCl₂(s) + O₂(g)

Left hand side                     Right hand side

Ca = 1                                     Ca = 1

Cl = 2                                     Cl = 2

O =  6                                     O = 2

Step 2:

 Ca(ClO₃)₂(s)      →      CaCl₂(s) + 3O₂(g)

Left hand side                     Right hand side

Ca = 1                                     Ca = 1

Cl = 2                                     Cl = 2

O =  6                                     O = 6

Answer:

b is the correct answer

do not trust answer one

Explanation:

Answer:

The answer is

[tex] \huge 7.40 \times {10}^{21} Hz[/tex]

Explanation:

To find the frequency of the wave we use the formula

[tex]f = \frac{E}{h} \\ [/tex]

where

E is the energy

f is the frequency

h is the Planck's constant which is

6.626 × 10-³⁴ Js

From the question

E = 4.90 × 10-¹² J

So we have

[tex]f = \frac{4.90 \times {10}^{ - 12} }{6.626 \times {10}^{ - 34} } \\ [/tex]

We have the final answer as

[tex]7.40 \times {10}^{21} \: \: Hz[/tex]

Hope this helps you

Explanation:Thermal energy, or heat, is the energy that comes from the movement of atoms and molecules in a substance. Heat increases when these particles move faster. Geothermal energy is the thermal energy in the earth. Motion energy is energy stored in the movement of objects.

I hope this helped!

Answer:

48000

Explanation:

maths

Answer:

48000

Explanation:

(5x10^3) = 5 × 1000 = 5000

(4.3x10^4) = 4.3 × 10000 = 43000

5000 + 43000 = 48000

Answer:

Explanation:

Here you go!! Hope this helps.

Answer:

i hope this helps. sorry if it totally doesn't

Answer:

266Lr

Thirteen isotopes of lawrencium are currently known; the most stable is 266Lr with a half-life of 11 hours, but the shorter-lived 260Lr (half-life 2.7 minutes) is most commonly used in chemistry because it can be produced on a larger scale.

Explanation:

hopefully that helps you

Answer:

Explanation:

Kb of  (CH₃)₃N is 7.4 x 10⁻⁵

initial concentration of (CH₃)₃N   a   is .48 M

(CH₃)₃N    +   H₂O =  (CH₃)₃NH⁺  +  OH⁻

a - x                                     x               x  

x² / (a - x )  = Kb

x is far less than a so a - x can be replaced by a .

x² / a   = Kb

x²  = a x Kb = .48 x 7.4 x 10⁻⁵ = 3.55 x 10⁻⁵ = 35.5 x 10⁻⁶

x = 5.96 x 10⁻³

pOH = - log ( 5.96 x 10⁻³ )

= 3 - log 5.96

= 3 - .775

= 2.225