Answer:
diffusion
Explanation:
plants have stomata at the bottom of their leaves. these allow for CO2 to diffuse in and out of the plant.
The sound of a trumpet ECHOES off a nearby mountain. This is which type of wave interaction?
Answer:
reflection
Explanation:
wave reflection is when a sound bounces off something it cannot go through, like echoing
Analyzing models compare an atom’s structure to a ladder. Identify one way in which ladder is not a good model from the atom.
Answer:
Climbing a ladder assumes that you would touch/use each step only once. Electrons will take one layer that is empty first, and previous layers or "steps" will continue being filled with additional electrons only when every other layer is occupied by, at least, one electron.
Explanation:
A good analogy is what passengers in a bus do. Everyone tries to sit alone first and only when every pair of seats has a person already seated, people will use them as well, sitting next to each other.
UGRENT! Please help showing all work
Answer:
a. The limiting reactant is Ca(OH)₂
b. The theoretical yield of CaCl₂ is approximately 621.488 grams
c. The percentage yield of CaCl₂ is approximately 47.06%
Explanation:
a. The given chemical reaction is presented as follows;
Ca(OH)₂ + 2HCl → CaCl₂ + 2H₂O
Therefore;
One mole of Ca(OH)₂ reacts with two moles of HCl to produce one mole of CaCl₂ and two moles of water H₂O
The mass of HCl in an experiment, m₁ = 229.70 g
The mass of Ca(OH)₂ in an experiment, m₂ = 207.48 g
The molar mass of HCl, MM₁ = 36.458 g/mol
The molar mass of Ca(OH)₂, MM₂ =74.093 g/mol
The number of moles of HCl, present, n₁ = m₁/MM₁
∴ n₁ = m₁/MM₁ = 229.70 g/(36.458 g/mol) ≈ 6.3 moles
The number of moles of Ca(OH)₂, present, n₂ = m₂/MM₂
∴ n₂ = m₂/MM₂ = 207.48 g/(74.093 g/mol) ≈ 2.8 moles
The number of moles of Ca(OH)₂, present, n₂ = 2.8 moles
According the chemical reaction equation the number of moles of HCl the 2.8 moles of Ca(OH)₂ will react with, = 2.8 × 2 moles = 5.6 moles of HCl
Therefore, there is an excess HCl in the reaction and Ca(OH)₂ is the limiting reactant
b. According the chemical reaction equation the number of moles of CaCl₂ produced in he reaction by the 2.8 moles of Ca(OH)₂ = 2.8 × 2 moles = 5.6 moles of CaCl₂
The molar mass of CaCl₂ = 110.98 g/mol
The mass of the 5.6 moles of CaCl₂ = 5.6 moles × 110.98 g/mol ≈ 621.488 grams
The theoretical yield of CaCl₂ ≈ 621.488 grams
c. Given that the actual mass of CaCl₂ produced = 292.5 grams, we have;
The percentage yield of CaCl₂ = The actual yield/(The theoretical yield) × 100
∴ The percentage yield of CaCl₂ = (292.5 g)/(621.488 g) × 100 ≈ 47.0644646397%
The percentage yield of CaCl₂ ≈ 47.06%.
what is gold on the periodic table of element
Answer:
Gold is element 79 and its symbol is Au.
Please help ASAP!! I’m stuck!!
Which statement is true based on the formula?
6CO2 + 6H2O —> C6H12O6
+ 6O2
1. The mass of carbon dioxide plus water is equal to the mass of sugar plus oxygen
2. The mass of carbon dioxide plus water is less than the mass of sugar plus oxygen
3. The mass of carbon dioxide plus water is greater than the mass of sugar plus oxygen
Answer:
The answer of this question is 3
How do atmospheric updrafts affect clouds?
Answer:
Updrafts characterize a storm's early development, during which warm air rises to the level where condensation begins and precipitation starts to develop. In a mature storm, updrafts are present alongside downdrafts caused by cooling and by falling precipitation.
Hope it helps
Have a great Day : P
An organism from the past that is related to all the organisms in the group is called?
Answer:
phylogenic trees/phylogeny
Explanation:
the evolutionary history and relationship of an organism or group of organisms is called its phylogeny
Pls help fast, I will give brainliest!
Answer:
c
Explanation:
When the equation H2 + Fe3O4 = Fe + H2O is completely balanced using the smallest whole numbers, the coefficient oH2 would be A.) 1 B.)2 C.) 3 D.) 4
Answer:
H2 would have a coefficient of 2.
Explanation:
According to the balanced chemical equation, the coefficient of hydrogen is 4.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ5
how would a map of a galaxy be different from a map of a city?
Answer:
A map of the galaxy would be a lot bigger and have a lot more names such as planets, stars, etc. While a city would be more basic than a whole galaxy.
2) Liquid soap is dissolve in water to make a soap solution. Why is this
solution called a mixture?
Explanation:
Soap solution is called a mixture because you're combining a ratio of liquid soap and water to make a mixture.
How do we know if molecules have kinetic energy?
What is the difference between hurricanes,typhoons,and tropical cyclones?
the one main difference between a hurricane and a typhoon is the specific location where the storm takes place!!
typhoons and hurricanes can reach sustained winds of an averaging 74 mph.
what is nucular decay
Answer:
Nuclear decay is also called radioactive decay, and it occurs in a series of sequential reactions until a stable nucleus is reached. Nuclear reactions release much more energy—orders of magnitude more—than exothermic chemical reactions.
Explanation:
1
What is the mass of 0.328 mol of CO2?
Answer:
use this conversation units to help you hope it helps3. You believe that water boils at 212 degrees Fahrenheit (100 degrees Celsius). Write the numberon the scale from best to worst.
1. Your cousin said that he tested the temperature of water boiling and found that it was 100°C.
2. Most people you know believe that water boils at 100°C.
3. You used a thermometer to measure the temperature at which water boiled. You repeated the experiment 3 times. Each time the thermometer read 100°C.
4. You read an article in a science journal from 50 different labs around the world that have tested the temperature of water and found that it boils at 100°C in every location.
You come across an article in a scientific journal from 50 different laboratories around the globe that measured the boiling point of water and discovered that it is 100°C everywhere.
What transpires when water is heated to 100 C (This is 212 F)?Water turns into gas around 212°F (100°C), which is the temperature at which it begins to boil (water vapor). Pressure affects the melting/freezing and boiling points. Water's boiling point changes when air pressure changes. The boiling point decreases with increasing altitude or decreasing pressure.
At 212 degrees Fahrenheit, does water boil, or at 100 degrees?Water has a freezing point of 32 degrees Fahrenheit and a boiling point of 212 degrees Fahrenheit on the Fahrenheit scale.
To know more about laboratories visit:-
https://brainly.com/question/28233400
#SPJ4
What is the difference between a pure solvent and a solution? Do they have the same physical properties?
Answer:
The physical properties of a solution are different from those of the pure solvent. ... Colligative properties are those physical properties of solutions of nonvolatile solutes that depend only on the number of particles present in a given amount of solution, not on the nature of those particles.
Learn more:
brainly.com/question/12225553
In a water molecule, what type of bond forms between the oxygen and hydrogen atoms
UGRENT! Please help showing all work
Answer:
a. Oxygen
b. 20.39g of Al₂O₃
c. 87%
Explanation:
In order to produce 2moles of Al₂O₃, we need to make react 4 moles of Al, to 3 moles of O₂.
We determine the limiting reactant with the moles of each:
12.98g / 26.98g/mol = 0.481 moles of Al
9.6g / 32g/mol = 0.300 moles of oxygen
4 moles of Al react to 3 moles of O₂
Then, 0.481 mol may react to (0.481 . 3)/4 = 0.361 moles
We only have 0.300 moles of O₂ and we need 0.361. Oxygen is the limiting reactant.
So 3 moles of O₂ can produce 2 moles of Al₂O₃
Our 0.300 moles may produce (0.300 . 2) / 3 = 0.200 mol
Our theoretical yield is: 0.2 mol . 101.96g/ mol = 20.39 g
To determine the percent yield we calculate:
(Produced yield/ Thoeretical yield) . 100 → (17.74 /20.39) . 100 = 87%
What is the name of the compound NO₄?
Answer:
hello
Explanation:
answer is oxido nitrate please follow me
why are metals poor choices for coffee mugs?
Answer:
They will stay too hot.
Explanation:
You would burn yourself on the mug and your drink would be too hot to drink.
Which of the following describes wind direction?
Wind direction is reported by the direction from which it originates. For example, a north or northerly wind blows from the north to the south. Wind direction is usually reported in cardinal (or compass) direction, or in degrees.
Gas in a balloon occupies 3.3 liters. What volume will it occupy if the pressure is changed from 100 kPa to 90.0 kPa, if the temperature is held constant?
Answer:
3.7 L
Explanation:
Initial volume (V₁) = 3.3 L
Initial pressure (P₁) = 100 KPa
Final pressure (P₂) = 90 KPa
Final volume (V₂) =?
The final volume of the gas can be obtained by using the Boyle's law equation as follow:
P₁V₁ = P₂V₂
100 × 3.3 = 90 × V₂
330 = 90 × V₂
Divide both side by 90
V₂ = 330 / 90
V₂ = 3.7 L
Thus, the final volume of the gas is 3.7 L
what is the formula of the compounds in B
pls help
Answer:
PCl3
Explanation:
The molecular formular of a compound shows the exact number of atoms of elements present in the compound. In this illustration, there is one atom of P and 3 atoms of Cl.
The formular is given as; PCl3
Answer:
PCl³
Explanation:
because there are 1 phosphorus atom and 2 chlorine atom.
Pls help match the following
Answer:
citric acid = orange
I know the answer for this only..
What causes dipole interactions?
bonding of a covalently bonded hydrogen to an unshared electron pair
attraction between ions
attraction between polar molecules
sharing of electron pairs
What happens when a chemical reaction reaches equilibrium
What are resistors? please help
Answer:Resistor Basics
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor's resistance limits the flow of electrons through a circuit.
They are passive components, meaning they only consume power (and can't generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
Resistor units
The electrical resistance of a resistor is measured in ohms. The symbol for an ohm is the greek capital-omega: Ω. The (somewhat roundabout) definition of 1Ω is the resistance between two points where 1 volt (1V) of applied potential energy will push 1 ampere (1A) of current.
As SI units go, larger or smaller values of ohms can be matched with a prefix like kilo-, mega-, or giga-, to make large values easier to read. It's very common to see resistors in the kilohm (kΩ) and megaohm (MΩ) range (much less common to see miliohm (mΩ) resistors). For example, a 4,700Ω resistor is equivalent to a 4.7kΩ resistor, and a 5,600,000Ω resistor can be written as 5,600kΩ or (more commonly as) 5.6MΩ.
Schematic symbol
All resistors have two terminals, one connection on each end of the resistor. When modeled on a schematic, a resistor will show up as one of these two symbols:
Resistor schematic symbols
Two common resistor schematic symbols. R1 is an American-style 1kΩ resistor, and R2 is an international-style 47kΩ resistor.
The terminals of the resistor are each of the lines extending from the squiggle (or rectangle). Those are what connect to the rest of the circuit.
The resistor circuit symbols are usually enhanced with both a resistance value and a name. The value, displayed in ohms, is obviously critical for both evaluating and actually constructing the circuit. The name of the resistor is usually an R preceding a number. Each resistor in a circuit should have a unique name/number. For example, here's a few resistors in action on a 555 timer circuit:
Answer: resistor is
Explanation:
A resistor controls the flow of the electrical current within a circuit. Resistors are made from materials like copper or carbon, which make it difficult for the electrical charges to flow through a circuit. The most common type of resistor is a carbon resistor, which is a general purpose resistor, best suited for lower-powered circuits.
The job of the ______ is to hold all of the parts of a cell together
Answer:
cell membrane
Explanation:
it holds everything together
How many moles are in 3.0g of A1203?
Answer:
0.065 moles
Explanation: