Carbon atoms always need four bonds to attain stability. Draw in the hydrogen atoms at the appropriate spots in the Lewis structure of the hydrocarbon chain to get a stable molecule.

Average kinetic energy is the average sum of all kinetic energy of all the molecules of gases. Therefore, the new kinetic energy is 48 times the original kinetic energy.

It is a energy which is possess  by a moving object. It is very difficult to find the correct value of kinetic energy so we find average kinetic energy. Which is very easy to calculate as compared to calculating kinetic energy

Average kinetic energy is directly proportional to temperature. It is not dependent on the type of gases or mass of gases

Mathematically,

K.E=2/3KT

Where,

K= Boltzmann constant

T is the temperature

Gases at higher temperature will have higher average kinetic energy. For every 10 degree rise in temperature, kinetic energy of reaction gets double. There are 24 times 10 between the given temperature  -49C to 287C. So, the new kinetic energy is 48 times the original kinetic energy.

Therefore, the new kinetic energy is 48 times the original kinetic energy.

Learn more about the average kinetic energy, here:

https://brainly.com/question/22174271

#SPJ1

Alcohol iodide nucleophile Is identified as  the alkyl iodide and the nucleophile that would be used.

Nucleophile is defined as a chemical species that provides an electron pair to create a chemical bond in response to an action. A nucleophile typically has one electron pair and is negatively charged or neutral.

Alcohols with alkyl halides of hydrogen. Alcohols often undergo a nucleophilic substitution reaction to produce an alkyl halide and water when exposed to HBr or HCl. Alkanes and alcohols can be converted into alkyl halides through a nucleophilic substitution process.

Thus, alcohol iodide nucleophile Is identified as  the alkyl iodide and the nucleophile that would be used.

To learn more about nucleophile, refer to the link below:

https://brainly.com/question/28325919

#SPJ1

Answer:

Radon, Bismuth, Lead, and Thallium

Explanation:

Its from smallest to largest. Hope it helps!

The temperature change of the resulting solution, given that the soluton has a specific heat of 1 cal/g·°C is 18.7 °C

We know that heat released is related to change in temperature according to the following formula:

Q = MCΔT

Where

Using the above formula, the temperature change of the solution can be obtained as follow:

Q = MCΔT

-8.8×10² = 47 × 1 × ΔT

-8.8×10² = 47 × ΔT

Divide both side by 47

ΔT = -8.8×10² / 47

ΔT = -18.7 °C

Thus, the temperature change is 18.7 °C

Learn more about temperature change:

https://brainly.com/question/5449319

https://brainly.com/question/17036928

#SPJ1

A rhombus is a quadrilateral with all the sides of equal measurements. Therefore, the value of x, y, and z are 45, 7, and 7, respectively.

A rhombus is a quadrilateral with all the four sides having equal measurements. The opposite sides are parallel to each other which gives it the shape of a kite.

The value of x, y, and z can be calculated as all the sides have equal value.

x - 5 = 6y -2 = 5z + 5 = 40

Therefore, on solving each equation separately we get.

x - 5 = 40

x = 40 + 5

x = 45

6y - 2 = 40

6y = 40 + 2

6y = 42

y = 42/ 6

y = 7

5z + 5 = 40

5z = 40 - 5

5z = 35

z = 35/ 5

z = 7

Therefore, the values of x, y, and z are 45, 7, and 7, respectively.

Learn more about Rhombus here:

https://brainly.com/question/27870968

#SPJ1

The two main postulates that was given by Antoine Lavoisier are, oxygen play an important role in combustion and the other is mass of the reactant and product is conserved. Therefore the mass of HF is 28grams.

According to Law of conservation of mass, mass can neither be created nor be destroyed. Mass can only be transformed from one form to another. The law of conservation of mass was given by Antoine Lavoisier. Every reaction in nature follow the law given by Antoine Lavoisier that is mass is always conserved.

H[tex]_2[/tex] + F[tex]_2[/tex] → 2HF

Mass of  H[tex]_2[/tex]=8Grams

mass of F[tex]_2[/tex]= 20grams

According to law of conservation f mass

mass of H[tex]_2[/tex] + mass of F[tex]_2[/tex]   = mass of HF

Substituting all the given values, we get

8grams + 20grams =mass of HF

mass of HF=28grams

Therefore the mass of HF is 28grams.

To know more about law of conservation of mass, here:

https://brainly.com/question/28711001

#SPJ1

As per the standard data, the heat evolved during one mole of calcium carbonate decomposes is 177.8 KJ. Thus 15 g or 0.15 moles of calcium carbonate when decomposed will produce 26.67 KJ of heat.

Reaction enthalpy of a substance is the heat evolved or absorbed during a reaction. Reaction enthalpy is negative for an exothermic reaction and positive for an endothermic reaction.

Molar mass of calcium carbonate = 100 g.

no.of moles in 15 g = 15 /100 = 0.15 moles.

One mole or 100 g of calcium carbonate decompose to evolve 177.8 KJ according to the scientific record.

Thus, heat evolved by the decomposition of 0.15 moles is 0.15 × 177.8 KJ = 26.67 KJ.

Hence, the heat evolved during the decomposition of 15 g of calcium carbonate is 26.67 KJ.

To find more on reaction enthalpy, refer here:

https://brainly.com/question/1657608

#SPJ1

Each sentence about the bioavailability of minerals in foods should be completed with either increases or decreases as follows:

Nutrients can be defined as the chemical compounds (substances) or minerals that are present in food, and they are needed by the body of a living organism for healthy growth, reproduction, development, proper functioning, and reproduction.

In Science, there are five (5) main classes of nutrients and these include the following:

In conclusion, phytic acid, oxalic acid, and refinement of grains are factors that decrease the bioavailability of minerals in foods while Vitamin C and Vitamin D increases the bioavailability of minerals in foods.

Read more on nutrients here: brainly.com/question/4413413

#SPJ1

sorry it's not clear anyway hope you can see the H and C .. the hydrogen atoms are 8

Answer:

an inference is an educated answer based on a piece of information you have been given

Explanation:

e.g. they had pigtails in their long blonde hair.

from this we can infer that I am speaking about a girl

The balanced chemical equation is 3 Sr(OH)₂ + Al₂(SO₄)₃[tex]\rightarrow[/tex] 3 SrSO₄ + 2 Al(OH)₃.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

The mass of [tex]CO_2[/tex] that will be produced when 25.0 g of [tex]C_8H_{18[/tex] reacts completely in the equation would be 154.035 g.

From the balanced equation of the reaction which goes thus:

[tex]C_8H_{18} + 25 O_2 -- > 16 CO_2 + 18 H_2O[/tex]

The mole ratio of [tex]C_8H_{18[/tex] that reacts and the [tex]CO_2[/tex] that is produced is 1:16.

Recall that: mole = mass/molar mass

The molar mass of [tex]C_8H_{18[/tex] is 114.23 g/mol

Mole of 25.0 g  [tex]C_8H_{18[/tex] = 25/114.23

                                     = 0.22 mol

Since the mole ratio is 1:16, the moles of [tex]CO_2[/tex] that will be produced by 0.22 mol of [tex]C_8H_{18[/tex] would be:

0.22 x 16 = 3.50 mol

The molar mass of [tex]CO_2[/tex] is 44.01 g/mol, thus, the mass of 3.50 mol of the gas can be determined as:

Mass = mole x molar mass

         = 3.5 x 44.01

         = 154.035 g

In other words, the mass of [tex]CO_2[/tex] that will be produced when 25.0 g of [tex]C_8H_{18[/tex] reacts completely in the equation would be 154.035 g.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

Answer:

Explanation:The electronic configuration of Oxygen is 1 s 2 2 s 2 2 p 4 .

1s²2s²2p⁶ is a reasonable electron configuration. Therefore, the correct option is option D.

The arrangement of an atom's or molecule's (or other physical structure's) electrons in their atomic or molecular orbitals is known as the electron configuration in atomic physics or quantum chemistry. For instance, the neon atom's electron configuration is 1s2 2s2 2p6, which means that 1, 2 and 6 electrons, respectively, are present in each of the 1s, 2s, and 2p subshells.

According to electronic configurations, each electron moves individually within an orbital while being surrounded by an average field produced by all other orbitals. Slater determinants and configuration state functions are used to mathematically describe configurations. 1s²2s²2p⁶ is a reasonable electron configuration.

Therefore, the correct option is option D.

To know more about electron configuration, here:

https://brainly.com/question/29757010

#SPJ5

Variations in the solar resource are probably the first and main consideration. You can use local weather stations where available, otherwise satellite data (eg from NASA's website) or commercial databases such as Meteonorm. Also there is quite a comprehensive set of data files in the SAM software

Other important considerations are

local environment: plants and animals that could be affected by the system; community support and buy-in.wind, hail, rain, snow profile for the location in question. if there are high/tropical winds then it will increase the plant cost.flight paths and roads near the plant which could be affected by glint and glareproximity to a local town where staff will be able to live both during construction and later during operationproximity to a electricity transmission line with available capacityavailability of water for mirror cleaning and steam blowdown.cost (and availability) of electricity in the area. If remote, electricity/energy may be very expensive, which will enable a high price for electricity sold from the plant.quality of road to the plant, required to bring equipment and materials to sitepolitical stability of the region -- potential impact on perceived bankability of the project.

Many of these items will have a large influence on the cost of the plant and/or the revenue it will generate during its life. Others relate to environmental and risk factors and are also critically important to consider.

Hope this helps!!

[tex]{ \blue{ \sf{Albumin}}}[/tex] is a soluble and globular monomeric protein encoded by chromosome 4 that comprises about half of the protein found in blood serum. It functions as a carrier protein for steroids, fatty acids, and thyroid hormones as well as stabilizing extracellular fluid volume.

Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, the volume of gas will be collected for the complete reaction of 24.23 g of NiO is 4.19L.

Ideal gas equation is the mathematical expression that relates pressure volume and temperature. There is no force of attraction between the particles.

Mathematically the relation between Pressure, volume and temperature can be given as

PV=nRT

where,

P = pressure of gas sample

V= volume of gas sample

n =number of moles of gas sample

T =temperature of gas

R = Gas constant = 0.0821 L.atm/K.mol

Substituting all the given values, we get

Molar mass of NiO=74.6928g/mol

mass of NiO= 24.23 g

Number of moles of NiO =0.324

From reaction the molar ratio between NiO and O[tex]_2[/tex] is 2:1

Number of moles of O[tex]_2[/tex] =0.16moles

applying ideal gas equation

0.98atm×V =0.16× 0.0821×313

V =4.19L

Therefore, the volume of gas will be collected for the complete reaction of 24.23 g of NiO is 4.19L.

To learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ1

The standard enthalpy change for the reaction 2A + B ⇌ 2C + 2D   is 195 kJ/mol.

The enthalpy of a reaction is a measure of the heat changes that occur when reactants form a product in a given reaction.

The enthalpy change of a reaction can be calculated using the formula given below:

Enthalpy of reaction = sum of enthalpies of the products  - sum of enthalpies of the reactants

Considering the given reaction: 2A + B ⇌ 2C + 2D  

Enthalpy of reaction = (2 * C + 2 * D) - (2 * A + B)

Enthalpy of reaction = {[2 * 177 + 2 * (-515)] - [2 * (-231) + (-409)]}

Enthalpy of reaction = 195 kJ/mol

Learn more about enthalpy of reaction at: https://brainly.com/question/14291557

#SPJ1

Answer:

H/Hydrogen atoms = 12

reason:

no. of carbon=5

so it'll be C5H12

Answer:

As you travel away from the Earth's surface, your mass stays the same but your weight reduces as gravitational pull decreases. For example, an astronaut orbiting the Earth and floating weightlessly in the cabin still has the same mass.

Explanation:

On the decomposition of 2.60 moles of hydrogen peroxide, 254.8 KJ energy will be released.

A decomposition reaction can be defined as a reaction in which a chemical compound breaks down into two or more simple compounds. The general form  to express a decomposition reaction is:

AB    →   A   +    B

Most decomposition reactions accept energy in the form of heat, radiation, or electricity. The decomposition reaction of hydrogen peroxide is shown below:

2H₂O₂(l)    →   2H₂O (l)  +  O₂(g)                        ΔH = - 196 KJ/mol

2 moles of  hydrogen peroxide decomposes energy released = 196 KJ

2.60 of H₂O₂  decomposes energy released = 196 ×2.60/2 = 254.8 KJ

Learn more about decomposition reactions, here:

brainly.com/question/16987748

#SPJ1

The mass of the original iridium‑192 remains after 5 days is 1.16 g.

Mass is defined as the body's resistance to acceleration when a net force is applied; a measure of inertia. Gravity and inertia, which are the two main forces influencing how objects move in space, make mass crucial.

Radioactive isotope iridium-192 (Ir-192) is iridium. It is a gamma emitter with a 74-day half-life. 1/4 of the sample will experience radioactive decay in 3.36 days. The substance's decay constant can be found. Subtract ln 2 from the substance's decay constant.

λ = ln2 / T 1/2

λ = ln2 / 5 1/2

λ = 1.16 g

Thus, the mass of the original iridium‑192 remains after 5 days is 1.16 g.

To learn more about mass, refer to the link below:

https://brainly.com/question/19694949

#SPJ1

Answer:

Molar mass of dye = 225.8 g/mol

Mass of dye = 17.26 mg

Volume of stock solution = 500.0 mL

Concentration of dye (M) = (17.26 mg/225.8 g/mol) / (500.0 mL/1000 L) = 0.000769 M

Concentration of dye (mM) = 0.769 mM

According to the molar concentration, the concentration of the dye in the stock solution is 15.04×10⁻³M and 15.04×10⁻⁶mM.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.

Substitution of values in formula gives, M= 0.017/225.8×1/0.5=15.04×10⁻³ M or 15.04×10⁻⁶ mM.

Thus, the concentration of the dye in the stock solution is 15.04×10⁻³M and 15.04×10⁻⁶mM.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ2

The net force on the man is 10 newtons forward. The parachute is pushing the man forward with 10 newtons of force. Therefore, option A is correct.

The vector sum of the forces exerted on a particle or object is known as the net force. The original forces' impact on the motion of the particle is replaced by the net force, which is a single force.

In accordance with Newton's second rule of motion, it causes the particle to accelerate at a rate equal to the sum of all those actual forces.

The vector sum of all forces exerted on an object is known as the net force. The net force acting on an object is zero when it is in equilibrium, whether it is at rest or moving at a constant speed. Only when all of a vector's components are zero can a vector have a magnitude of zero.

Thus, option A is correct.

To learn more about the net force, follow the link;

https://brainly.com/question/18031889

#SPJ1

Answer: A

Explanation:

so basically maybe you should

Answer:

no. of H = 10

no. of C = 4

C4H10

To solve this type of question we must know the concept of rate law for first order kinetics and first law related to this. Therefore, the half-life of the given compound is 12.8hr.

There are two kinds of rate law in chemical kinetics one is differential rate law and other is integrated rate law.

The expression for half life for first order reaction is

[tex]t_{1/2} = \frac{0.693}{K}[/tex]

k= rate constant= 5.40×10⁻²/hr

Substituting all the given values in the above equation, we get

[tex]t_{1/2} = \frac{0.693}{ 5.40 *10^{-2}}[/tex]

On solving this, we get

half life =0.128×10²=12.8hr

Therefore, the half-life of the given compound is 12.8hr.

Learn more about rate law for first order kinetics here:

https://brainly.com/question/12593974

#SPJ1

The final temperature of the sample of nitrogen dioxide gas that occupies 625 cm³ at 70.0 °C and 15.0 psi is 299.12K.

The temperature of a gas can be calculated by using the combined gas law formula as follows:

P₁V₁/T₁ = P₂V₂/T₂

Where;

According to this question, a sample of nitrogen dioxide gas occupies 625cm³ at 70.0 °C and 15.0 psi. The final temperature can be calculated as follows:

15 × 625/343 = 15 × 545/T

27.33T = 8175

T = 299.12K

Therefore, 299.12K is the final temperature of the sample of nitrogen dioxide gas.

Learn more about temperature at: https://brainly.com/question/18875024

#SPJ1

No. of moles of Ni = 1.7 mole

No of atoms of Ni = 1.023× 10²⁴ atom

A mole is equivalent to 6.022 × 10²³ units of that material (such as atoms, molecules, or ions). Avogadro's number, or Avogadro's constant, is 6.022 × 10²³

For instance, a mole of carbon-12 atoms weighs 12 grammes. Additionally, a mole of hydrogen atoms weighs 1 gram, but a mole of hydrogen molecules weighs 2 gram.

Given that,

mass of nickel (m) =  100 gm

Now, no. of moles of Ni = mass / molar mass

                                        = 100 gm/ (59 gm/mole)

[ As we know, molar mass of Nickel (Ni) = 59 gm/mole ]

                                        = 1.7 mole

Now, no of atoms = no. of mole × Avogadro's No. ([tex]N_{A}[/tex])

                             = 1.7 mole × 6.022 × 10²³ atom/mole

                             = 10.23 × 10²³ atom

                             = 1.023× 10²⁴ atom

Thus, no. of moles of Ni = 1.7 mole

no. of atoms of Ni = 1.023× 10²⁴ atom

To know more about moles refer to:

https://brainly.com/question/15356425

#SPJ4