can someone please help me with this question I will be soooo happy!!!

Answer:

Lithium sulfide

Answer:

24g

Explanation:

2×12=24

1mole of Mg react with 2 mooe of O2

Answer:

Explanation:

To determine the melting point of the unknown white substances. A sample of each of the unknown can be placed in separate capillary tubes and then placed in an adjustable heat source (for example water bath). A thermometer is then placed in the heat source very close to the tube holding the sample. The temperature of the heat source will be adjusted until the solid substance in the capillary tube starts to melt, the temperature at this point is noted as the melting point.

To determine the conductivity of the white substances, an electrolysis experiment is done. A sample each of the unknown substances is dissolved in water. These aqueous solutions are prepared separately. Two electrodes (positively charged anode and negatively charged cathode) are dipped into each of these solutions and an electric current is passed through these solutions, from an energy source (such as batter), through the electrodes (with the electric current flowing from the anode to the cathode). A voltmeter is then connected to this set-up to determine if electricity is been passed through the individual solutions.

The substance that is the salt will be the white substance that has the higher melting point and conducted electricity in the electrolysis set up; this is because NaCl salt is an ionic compound which has a high melting point and conducts electricity when dissolved in water. While the white substance that had a lower melting point and did not conduct electricity will be the sugar; this is because sugar/sucrose is an organic substance that has a low melting point and does not conduct electricity when dissolved in water.

Answer:

D

Explanation:

The one that best represents a compound is answer "D" because you compounds are chemically bonded and are always together.

Answer:

i think that the answer is B

Explanation:

If a student wants to investigate competition between two organisms in an ecosystem the organisms should have same adaptations and use same resources.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/1061425

#SPJ2

Answer:

anime

Explanation:

Answer:

I'm gonna say A and B

Explanation:

Not sure though

Hope I helped :)

Answer:

The loosening of soil and they bind the soil with the help of the roots

Explanation:

Here, we want to know how plants prevent erosion by wind or water.

The way they do this is by binding the soil with their roots such that it will not be easy for the erosion agent to erode the surface.

How they do this is by making sure that the soil

particles are binded together with their roots which helps to keep the particles of the soil intact and not eroded

Answer:

c

Explanation:

Answer:

wavelength = wave velocity/frequency.

Explanation:

c

 is a constant. It is usually given as

3.00

×

10

8

m/s or

3.00

×

10

10

cm/s rounded to three significant figures.

Wavelength is measured in meters, centimeters, nanometers, etc...).

Frequency has a unit of

1/s

which means

1

cycle per second. It is also given the unit Hertz (Hz) in honor of German physicist Heinrich Hertz who proved the existence of electromagnetic waves.

1

Hz

=

1/s

.

Answer:

Honestly no idea

Explanation:

FOOOOOOOOD

Answer:

flows through your viens and moves to your blood vesils

Explanation:

its how blood operates

Answer:

Reactants, Activation energy, Energy released by the reaction and Products

Explanation:

This energy profile is that of an exothermic reaction. In an exothermic reaction, heat is liberated to the surrounding. The surrounding becomes hotter than the environment.

The first box to the left is the reactants which signifies the species combining together.

The topmost box is the activation energy which is the energy barrier that must be over come before a reaction takes place.

The box underneath is the energy change. Here, energy is being released.

The right most box is the product of the reaction.

D snails, guppies and plants. The community should be diverse and have lots of biodiversity.

Answer:

to

Explanation:

to

Answer:

Corona Virus outbreak

Answer: Lithium ( 3),Calcium (20),Copper (29),Strontium (38),Potassium (19),Sodium (11)

Explanation:

Answer:

I want to say its Lonic Bonding.

Explanation:

Ionic bonding is the complete transfer of valence electron(s) between atoms.

Answer:

The sequence of individual steps, or elementary reactions, by which reactants are converted into products during the course of a reaction is called the reaction mechanism. The overall rate of a reaction is determined by the rate of the slowest step, called the rate-determining step.

Explanation:

Answer:

They hatch into larvae.

Explanation:

Answer: 25 + 27 + 29 = 81

81 divided by 3 = 27

your answer is 27

Explanation: you add them all together then however many numbers there are is how you divide it

Answer:

81 and 27 i think

Explanation:

Answer:

Sonoluminescence can occur when a sound wave of sufficient intensity induces a gaseous cavity within a liquid to collapse quickly. [...] The bubbles are very small when they emit the light—about 1 micrometer in diameter—depending on the ambient fluid (e.g., water) and the gas content of the bubble (e.g., atmospheric air).

Explanation:

Source is Google

Answer:

The basic metal ones?

Explanation:

...

Answer:

550 K

Explanation:

Given the following data;

Original Volume, V1 = 20mL

Original Temperature, T1 = 200K

New Temperature, V2 = 55mL

To find new temperature T2, we would use Charles' law.

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

[tex] VT = K[/tex]

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Making T2 the subject of formula, we have;

[tex]T_{2} = \frac{V2}{V1} * T_{1}\\[/tex]

Substituting into the equation;

[tex]T_{2} = \frac{55}{20} * 200\\T_{2} = \frac{11000}{20}\\T_{2} = 550K[/tex]

Therefore, the new temperature is 550K.

Answer:Figure 1. Energy losses in an incandescent light bulb are very large; most of the input energy is lost in the form of heat energy. This means that when energy is converted to a different form, some of the input energy is turned into a highly disordered form of energy, like heat. ...

Explanation:

Answer:

5730 years

Explanation: for more on radiocarbon dating.) and hence explain why the amount of carbon-14 in the sample decays by half over any period of 5730 years.

Answer:

I really dont know i just guessed :(

Explanation:

Answer:

index of refraction

Explanation:

Answer:

0.385 J/g°C

Explanation:

Using the following formula, the specific heat of an elemental substance can be calculated:

Q = m × c × ∆T

Where;

Q = quantity of heat (J)

m = mass (g)

c = specific heat capacity (J/g°C)

∆T = change in temperature (°C)

Based on the given information, Q = 1375J, m = 50g, initial temperature = 22.8°C, final temperature = 94.2°C, c =?

Q = m × c × ∆T

1375 = 50 × c × (94.2 - 22.8°C)

1375 = 50 × c × 71.4

1375 = 3570c

c = 1375/3570

c = 0.3851

c = 0.385 J/g°C

Answer:

CH4

- 4 electron

- 0 electron

- the geometry of Ch4 is tetrahedral

AlF3

- 3 electron

- 0 electron

- the geometry is trigonal planar

CCl4

- 4 electron

- 0 electron

- the geomotry is tetrahedral

SeH2

- 2 electron

- 2 electron

- the geometry is V shape