Answer:
NO
Explanation:
if it has no acceleration then it's not moving
Answer:
Yes when the velocity is constant then the acceleration is said to be zero. Thus an object with 0 acceleration can be in motion.
Let me give you an example to make you more clear
Example:
When a car is traveling at a constant 90 km/h in a straight line has nonzero velocity and zero acceleration.
Problem 5. A bullet leaves a rifle with a velocity of 452 m/s. While accelerating through the barrel of the rifle, the bullet moves a distance of 0.93 m. Determine the acceleration of the bullet.
Answer:
1.1 x 10⁵m/s²
Explanation:
Given parameters:
Velocity = 452m/s
distance = 0.93m
Unknown:
Acceleration of the bullet = ?
Solution:
To solve this problem, we use one of the kinematics equation which is given below:
V² = U² + 2aS
V is the final velocity
U is the initial velocity = 0m/s
a is the unknown acceleration
S is the distance traveled
So;
452² = 0² + (2 x a x 0.93)
204304 = 1.86a
a = 1.1 x 10⁵m/s²
A particle with charge q on the negative x axis and a second particle with charge 2q on the positive x axis are each a distance d from the origin. Where should a third particle with charge 3q be placed so that the magnitude of the electric field at the origin is zero? (Use any variable or symbol stated above as necessary.)
Answer:
The charge 3q must be placed at a distance of 1.73d away from the origin.
Explanation:
The electric field at the origin due to q at distance, d from the origin is E = q/4πε₀d².
The electric field at the origin due to 2q at distance, d from the origin is E' = -2q/4πε₀d². (It is negative since it its directed towards the negative x-axis)
Now, the net electric field at the origin due to both charges is thus E" = E + E' = q/4πε₀d² + (-2q/4πε₀d²) = q/4πε₀d² - 2q/4πε₀d² = -q/4πε₀d².
The electric field due to 3q at a distance x from the origin is E₁ = 3q/4πε₀x².
Now, the net electric field E' must cancel out E₁ so that the electric field at the origin is zero.
So, E' + E₁ = 0
E' = -E₁
-q/4πε₀d² = -3q/4πε₀x²
1/d² = 3/x²
taking inverse of both sides, we have
x²/3 = d²
multiplying both sides by 3, we have
x² = 3d²
taking square root of both sides, we have
x = (√3)d
x = ±1.73d
So, the charge 3q must be placed at a distance of 1.73d away from the origin.
Show the steps im confused.
The answer is 14 m/s
Answer:
14 m/s
Explanation:
KE=1/2mv^2
5880J= 1/2(60kg)v^2
5880J=(30)(V^2)
5880/30=V^2
196=v^2
square root of 196 is 14
A car with a mass of 1,400 kg is traveling at a speed of 40 m/s. What is its momentum?
Answer:
56000kgm/s
Explanation:
Momentum = Mass * Velocity (both in standard unit)
Therefore, the car's momentum = 1400 * 40 = 56000kgm/s (or 56000Ns)
HELP PLS MARKING BRANLIST 100 Pts TAKING TEST RN
A shopping cart is going 2.0 m/s and comes to a complete stop after 4 seconds. What was the cart's acceleration?
8 m/s2
-0.5 m/s2
0.5 m/s2
-8 m/s2
Answer:
0.5 m/s2
Explanation:
accelration formula : final velocty - starting velocity divided by time
According to O*NET, what are common work styles needed by Chefs and Head Cooks? Select four options.
dependability
fitness
stress tolerance
leadership
common sense
attention to detail
The answer is 1, 3, 4, and 6; I just did the question on Edg and I thought that it would need to be posted on here to help others
Answer:
1-3-4-6
Explanation:
not taking the mans answer but just posting it here for people to see it clearly if brushed over on his.
Refer to your Expeditions in Reading book for a complete version of this text.
Based on “Solar Power for Public Buildings,” which answer best states the author’s position on the use of solar power in California?
A The use of solar energy will double the pollution produced in California.
B The state’s tap water will be purer if processed in solar-powered plants.
C Increasing the use of solar power will positively impact the environment.
D Solar panels remove most of the toxic chemicals found in the atmosphere.
Answer:
d
Explanation:
Answer:
D. Solar panels remove most of the toxic chemicals found in the atmosphere.
People do not believe it is possible to use the sun's energy to create electricity.
Explanation:
I did the test.
How does the sun maintain its high temperature and energy output?
Answer:
The core of the sun is the region that extends from the center to about 20–25% of the solar radius. It is here, in the core, where energy is produced by hydrogen atoms (H) being converted into nuclei of helium (He). ... The core is the only part of the sun that produces an appreciable amount of heat through fusion.
Explanation:
I got you
By not running out of fuel (Hydrogen).
Rest assured ... When the sun runs low on Hydrogen, it'll go through several complex changes, and it'll end up at much much lower temperature, with much much lower energy output.
Explain the Difference between genetic diversity and ecosystem diversity?
Answer:
1. Genetic diversity are the differences in DNA among individuals within a species or population while ecosystem diversity is the number or variety of ecosystems within a particular area.
2. Genetic diversity is the genetic material of microorganisms, plants and animals contains information that determines the characteristics of all species and individuals that make up the diversity of the living world while the ecosystem diversity is the enormous range of terrestrial and aquatic environments on earth has been classified into a number of ecosystems.
Can someone help me with this last question
A chunk of beef has a mass of 11.6 grams and a volume of 58 cm3. What is the density of the chucky beef?
Group of answer choices
46.4
0
672.8
0.2
5
Answer:
0.2g/cm³
Explanation:
Given parameters:
Mass of the beef = 11.6g
Volume = 58cm³
Unknown:
Density = ?
Solution:
Density is the mass per unit volume of a substance.
Density = [tex]\frac{mass}{volume}[/tex]
So;
Density = [tex]\frac{11.6}{58}[/tex] = 0.2g/cm³
help me!
Bill left a hammer out in the rain all day. The next morning it had rust on it.
Oxygen and a metal chemically combine to form rust. What is rust an example of?
O a mixture
• a solution
an element
a compound
Answer:D.Compound
Explanation: internet
Why do you think spacecraft that carry instruments to collect data about objects in space are called probes?
Answer:
my mind cant comprehend a shing word u just said
Explanation:
The probes collect data, they capture the movement in space, therefore, spacecraft that carry instruments to collect data about objects in space are called probes, So the given statement is correct.
What are Probes?
Any conductor that is placed into a plasma and gathers current is a probe. Measurements of the current on the probe as a function of the bias potential given to the probe can be used to identify a plasma's properties.
Such probes affect their surroundings while directly detecting electron and ion flows in the plasma. Any conductive material (wire, foil, chamber walls, etc.) can serve as a plasma probe; nevertheless, precise control over the probe's size, shape, and substance is necessary to achieve detectable plasma levels. Astronauts are not present aboard probes. Scientists can analyze the data the probes relay back to Earth. Sputnik 1 was the first spacecraft to launch.
Because probes probably collect data, they capture the movement in space, therefore, spacecraft that carry instruments to collect data about objects in space are called probes.
To know more about probes:
https://brainly.com/question/12992890
#SPJ2
Which situations will NOT increase the reactions rate of most chemical reactions?
A) an increase in temperature
B) grind up the solute to increase surface area before mixing
C) by increasing the pressure in which the reaction takes place
D) decreasing the concentrations of the substances in the reaction
Answer:
D
Explanation:
Increasing temperature or pressure some times make the condition favorable to the reaction. Similarly increasing surface area of reacting mixture also helps to increase the reaction rate.
What is reaction rate ?The rate of a reaction is the rate of decrease in concentration of reactant or the rate of increase in concentration of the products. The rate of a reaction depends on several factors such as temperature, pressure, surface area etc.
Fir an endothermic reaction, as the temperature increases, reaction rate increases. Similarly, as the pressure increases, the reaction in which the number of moles of gaseous reactants is higher than that in products, rate increases.
The concentration of reactants must be sufficient for the reaction and decreasing the concentration of reactants does not favor an increase in reaction rate. Hence, option D is correct.
Find more on reaction rate :
https://brainly.com/question/8592296
#SPJ2
A rescue pilot drops a survival kit while her plane is flying at an ultitude of 2500m with a forward velocity of 95m. If the air friction is disregarded, how far advance of the starving explorer’s drop zone should she release the package?
Answer:
Approximately [tex]2.1\; \rm km[/tex], assuming that [tex]g = -9.8\; \rm m \cdot s^{-2}[/tex].
Explanation:
Let [tex]t[/tex] denote the time required for the package to reach the ground. Let [tex]h(\text{initial})[/tex] and [tex]h(\text{final})[/tex] denote the initial and final height of this package.
[tex]\displaystyle h(\text{final}) = \frac{1}{2}\, g\, t^2 + h(\text{initial})[/tex].
For this package:
Initial height: [tex]h(\text{initial}) = 2500\; \rm m[/tex].Final height: [tex]h(\text{final}) = 0\; \rm m[/tex] (the package would be on the ground.)Solve for [tex]t[/tex], the time required for the package to reach the ground after being released.
[tex]\displaystyle t^{2} = \frac{2\, (h(\text{final}) - h(\text{initial}))}{g}[/tex].
[tex]\begin{aligned} t &= \sqrt{\frac{2\, (h(\text{final}) - h(\text{initial}))}{g} \\ &\approx \sqrt{\frac{2\times (0\; \rm m - 2500\; \rm m)}{(-9.8\; \rm m \cdot s^{-2})}} \approx 22.588\; \rm s\end{aligned}[/tex].
Assume that the air resistance on this package is negligible. The horizontal ("forward") velocity of this package would be constant (supposedly at [tex]95\; \rm m \cdot s^{-1}[/tex].) From calculations above, the package would travel forward at that speed for about [tex]22.588\; \rm s[/tex]. That corresponds to approximately:[tex]95\; \rm m \cdot s^{-1} \times 22.588\; \rm s \approx 2.1 \times 10^{3}\; \rm m = 2.1\; \rm km[/tex].
Hence, the package would land approximately [tex]2.1\; \rm km[/tex] in front of where the plane released the package.
1. A brick and a peanut are dropped of the roof of a house at the same time, which
object hits the ground first? (Ignore air resistance).
Answer:
It would be the brick since the mass and the weight is greater than the peanut I might be wrong on this but thats the best answer i can give
Explanation:
Can some one please explain how to read this and what the answer would be?
Answer:
4 to 5
Explanation:
There are several ways to model a compound. One type of model is shown.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
Answer:
What is the chemical formula for the molecule represented by the model?
[tex] →CHO\\ →C_4H_9O_2✓ \\→C_4H_8O \\ →C_3H_8O_2[/tex]
2) C4H9O2 is the right answer.How far will a car travel in half an hour at
30 mph?
Answer:
The car will travel the distance of 15 miles
S= D/T
therefore
D=ST
D = Distance
S = Speed (30 mph)
T = Time (0.5 Hours)
D = 30 * 0.5 = 15
A person walks 60 meters in 1 minute. Then walks 30 meters in 2 minutes. What is thier average speed over the 3 minute walk?
Is gravitational energy a form of kinetic energy or potential energy? Why do you think that?
Please help due today!!
Answer:
When something is lifted, work is done on the object against the pull of gravity. This work is converted to a form of potential energy called gravitational potential energy. When the item falls towards Earth like an apple from a tree, gravitational potential energy is converted into kinetic energy.
0.0135 kg of steam at 100°C is
cooled, which turns it into water at
50.0°C. How much heat has been
removed? (Remember, it has to
change phase before cooling
down.)
Boil Pt (°C)
Material Melt Pt (°C) 4 0/kg)
Water
0
3.33.105
L(/kg) c (J/(kg*C))
2.26.106 4186
100
(Unit = J)
Answer:
33333.35 kg
Explanation:
I got it right on Acellus, rounded to 33300 sigfigs
When 0.0135 kg of steam at 100°C is cooled, turns it into water at 50.0°C. Then 33,342.45 J of heat has been removed.
What is latent heat?Latent heat is the heat absorbed or released by a substance during a change in its physical state without a corresponding change in temperature. This means that the heat energy is being used to break or form intermolecular bonds between the particles in the substance, rather than raising or lowering the temperature. Examples of processes that involve latent heat include melting, freezing, vaporization, and condensation. The amount of heat required or released during these phase transitions is dependent on the substance and the amount of material undergoing the change.
Here in the question,
To solve this problem, we need to use the formula for the heat required to change the phase of a substance, which is given by:
Q = m * L
where Q is the heat required, m is the mass of the substance, and L is the specific latent heat of the substance.
In this case, we need to find the heat required to change 0.0135 kg of steam at 100°C to water at 100°C, and then cool it down to 50°C.
First, we need to find the heat required to change the phase of the steam to water at 100°C. Using the table given, we can see that the specific latent heat of vaporization for water is 2.26 × 10^6 J/kg. So the heat required to change 0.0135 kg of steam to water at 100°C is:
Q1 = m * L = 0.0135 kg * 2.26 × 10^6 J/kg = 30,510 J
Next, we need to find the heat required to cool the water from 100°C to 50°C. Using the specific heat capacity of water, which is 4186 J/(kg°C), we can calculate the heat required as:
Q2 = m * c * ΔT = 0.0135 kg * 4186 J/(kg°C) * (100°C - 50°C) = 2832.45 J
The total heat removed is the sum of the heat required to change the phase of the steam and the heat required to cool the water:
Q = Q1 + Q2 = 30,510 J + 2832.45 J = 33,342.45 J =33.34245 kJ.
Therefore, 33,342.45 J of heat has been removed.
To learn about specific heat click:
https://brainly.com/question/11297584
#SPJ2
1. If a rock is dropped from a 600 meter cliff, how long will it take to hit the ground?
Dl
Answer:
11.1s
Explanation:
Given parameters:
Height of cliff = 600m
Unknown:
How long it takes to hit the ground = ?
Solution:
To solve this problem, we use one of the kinematics equation;
H = ut + [tex]\frac{1}{2}[/tex]gt²
H is the height
u is the initial velocity = 0m/s
t is the time taken
g is the acceleration due to gravity
600 = [tex]\frac{1}{2}[/tex] x 9.8 x t²
600 = 4.9t²
t² = 122.5
t = 11.1s
PLEASE HELP I WILL GIVE BRAINLYEST!!
Look at the world map shown below.
The picture shows the world map with a horizontal line labeled 'Equator' running across the middle of the map. A dotted line is shown slightly above the equator and parallel to it. This line is labeled 'Tropic of Cancer'. A dotted line is shown slightly below the equator and parallel to it. This line is labeled 'Tropic of Capricorn'. Florida is labeled on the left just above the Tropic of Cancer and Russia is labeled on the right closer to the north pole.
Public Domain
Which statement accurately describes the distribution of sunlight for the regions labeled? (3 points)
Group of answer choices
Florida has shorter seasons because it is more towards the west of the globe.
Russia has a greater number of longitudinal lines, which causes greater temperature differences.
Florida is situated closer to the Tropic of Cancer, which receives more constant and direct rays of the sun.
Russia is situated closer to the North Pole, which is tilted more towards the sun.
Answer:
Florida is situated closer to the Tropic of Cancer, which receives more constant and direct rays of the sun.
Explanation:
Took the test got it right C
Find the acceleration of a 600 kg car that experiences an impulse of 18,000 kgm/s in 0.05 seconds.
I need help with this question, i don’t understand it
Answer:
what?
Explanation:
Answer:
600m/s²
Explanation:
Given parameters:
Mass of car = 600kg
Impulse = 18000kgm/s
Time = 0.05s
Unknown:
Acceleration = ?
Solution:
To solve this problem, let us find the force that cause the impact first;
Impulse = Force x time
Force = [tex]\frac{impulse}{time}[/tex] = [tex]\frac{18000}{0.05}[/tex] = 360000N
So;
Force = mass x acceleration
Acceleration = [tex]\frac{Force }{mass}[/tex] = [tex]\frac{360000}{600}[/tex]
Acceleration = 600m/s²
The bottom of a ladder must be placed 4 feet from a wall. The ladder is 12 feet long. How far above the ground does the ladder touch the wall? Estimate your answer to the nearest tenth.
Answer:
Height of wall (Perpendicular) = 11.31 ft (Approx)
Explanation:
Given:
Base Distance (Base) = 4 feet
Height of ladder (Hypotenuse) = 12 feet
Find:
Height of wall (Perpendicular)
Computation:
Perpendicular = √Hypotenuse² - Base²
Height of wall (Perpendicular) = √12² - 4²
Height of wall (Perpendicular) = √144 - 16
Height of wall (Perpendicular) = √128
Height of wall (Perpendicular) = 11.31 ft (Approx)
i single and thiccccc hmu
Answer:
wtfffff
Explanation:
wtffffff
A closed cylindrical tank of radius 3.5 m and height 2m is made from
a sheet of metal. How much sheet of metal is required ?
Explanation:
Total surface area of cylinder:
[tex]2\pi \times r(h + r) \\ 2 \times \pi \times 3.5(3.5 + 2) \\ 2\pi \times 19.25 = 120.951317 \\ 120.95 \: {cm}^{2} [/tex]
sheet of metal required = 120.95 cm^2
Explanation:
Answer:
Given :-
A closed cylindrical tank of radius 3.5 m and height 2 m is made from a sheet of metal.
To Find :-
How much sheet of metal is required.
Formula Used :-
[tex]{\red{\boxed{\large{\bold{T.S.A\: of\: cylinder\: =\: 2{\pi}r(r + h)}}}}}[/tex]
where,
r = Radius
h = Height
Solution :-
Given :
Radius = 3.5 m
Height = 2 m
According to the question by using the formula we get,
⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5(3.5 + 2)[/tex]
⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5(5.5)[/tex]
⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5 \times 5.5T.S.A=2×722×3.5×5.5
⇒ \sf T.S.A =\: 2 \times \dfrac{22}{7} \times 19.25[/tex]
⇒ [tex]\sf T.S.A =\: 2 \times 60.5[/tex]
➠ [tex]\sf\bold{\purple{T.S.A =\: 121\: {m}^{2}}}[/tex]
∴ 121 m² of sheet of metal is required.
What is the momentum of a car that is 12000 g and is traveling at 45 m/s? (LOOK AT THE UNITS)
a)
267 kg*m/s
b)
540000 kg*m/s
c)
540 kg*m/s
d)
.27 kg*m/s
e)
54000kg*m/s
Answer:
e
Explanation:
Which part of the electromagnetic spectrum is nearest to radio waves?
X-rays
microwaves
gamma rays
ultraviolet light
Answer:
i believe it is the microwaves that is closest to the radio waves.
Explanation:
The microwaves are the part of the electromagnetic spectrum is nearest to radio waves.
What is meant by electromagnetic spectrum?The range of all EM radiation arranged from high to low frequency (short to long wavelength) according to their frequency or wavelength. is known as the electromagnetic spectrum (EM).
Here,
The visible light from a bulb in your home and the radio waves from a radio station are two examples of electromagnetic radiation. Radiation is energy that travels and disperses as it does.
The properties of the electromagnetic spectrum include the ways in which signals can propagate and how much data they can carry. Signals delivered at higher frequencies typically propagate more quickly but can carry more data in a given amount of space.
The electromagnetic spectrum begins with the lowest frequency radio waves and moves up in frequency and down in wavelength from there. Radio waves are followed by visible light, infrared radiation, and lastly microwaves.
Hence,
The microwaves are the part of the electromagnetic spectrum is nearest to radio waves.
To learn more about electromagnetic spectrum, click:
https://brainly.com/question/23727978
#SPJ5