calculate the wavelength of light that has its third minimum at an angle of 30 degrees when falling on double slits separated by 3

Answers

Answer 1

The wavelength of light that is inclined at a specified angle when falling on double slits is calculated to be 428.57 nm.

Angle = 30°

Order of interference m = 3

Distance between the slits d = 3 μ m = 3 × 10⁻⁶ m

We know the relation between wavelength, order of interference and distance as,

λ = d sinθ/(m+1/2)

By putting in the values, we have,

⇒ (3 × 10⁻⁶× sin30°)/(3+1/2) = 4.2857 × 10⁻⁷ m

By converting it to nm, we have,

⇒ 4.2857 × 10⁻⁷ × 10⁹ = 428.57 nm

Thus, the required wavelength of light is calculated to be 428.57 nm.

The question is incomplete. The complete question is 'Calculate the wavelength of light that has its third minimum at an angle of 30.0∘ when falling on double slits separated by 3.00 μm. Explicitly, show how you follow the steps in Problem-Solving Strategies for Wave Optics.'

To know more about wavelength:

https://brainly.com/question/16636743

#SPJ4


Related Questions

An aluminum rod is 20. 0 cm long at 20°C and has a mass of 350 g. If 10 000 J of energy is added to the rod by heat, what is the change in length of the rod?​

Answers

Linear expansion refers to the increase in length of a material as its temperature increases. It is typically measured as the change in length per unit length per degree of temperature change. the answer change in length of the rod is approximately 0.014 cm.

This effect is caused by the thermal motion of the atoms or molecules in a material, which increases as the temperature increases. Linear expansion is typically a small effect, but can be significant in certain applications, such as in the construction of bridges or buildings.The change in length of the rod can be calculated using the equation for linear expansion:

ΔL = L0 * α * ΔT

Where:

L0 = initial length (20.0 cm)

α = coefficient of linear expansion for aluminum (about 2.5 x 10^-5 /°C)

ΔT = change in temperature (can be calculated by using the heat added, mass, and specific heat capacity of aluminum)

First we need to calculate ΔT, we know that c(Aluminum)= 0.90 J/g °C

ΔT= Q / (m * c)where:

Q = heat added (10000 J)

m = mass of the rod (350 g)

c = specific heat capacity of aluminum (0.90 J/g °C)

Substituting the values we have,

ΔT = 10000 J / (350 g * 0.90 J/g °C) = 28.57142857142857 °C

Now we can find the change in length,

ΔL = L0 * α * ΔT = 20.0 cm * 2.5 x 10^-5 /°C * 28.57142857142857 °C = 0.014 cm

So the change in length of the rod is approximately 0.014 cm.

To learn more about linear expansion here:

https://brainly.com/question/14780533

#SPJ4

a rifle with a weight of 30.0 n fires a 5.0-g bullet with a speed of 300 m/s. (a) find the recoil speed of the rifle. (b) if a 700-n man holds the rifle firmly against his shoulder, find the recoil speed of man and rifle.

Answers

The recoil speed of man and rifle are 0.05 m/s and 0.0021 m/s .

(a) The recoil speed of the rifle can be found using the law of conservation of momentum. The momentum of the bullet is equal to the momentum of the rifle and the man.

Momentum of the bullet = mv = (5.0 g)(300 m/s) = 1.5 kg·m/s

Momentum of the rifle = (30.0 n)(v)

Therefore, v = 1.5 kg·m/s ÷ 30.0 n = 0.05 m/s

The recoil speed of the rifle is 0.05 m/s.

(b) The total momentum of the man and the rifle is equal to the momentum of the bullet.

Momentum of the man and rifle = mv = (700 n)(v)

Therefore, v = 1.5 kg·m/s ÷ 700 n = 0.0021 m/s

The recoil speed of the man  is 0.0021 m/s.

To know more about conservation of momentum  refer to the following link - https://brainly.com/question/7538238

A ball of mass 2 kg is attached to a vertical spring. The ball displaces 0. 1 m once it is attached. What is the spring constant?

Answers

The spring constant of spring when a ball of mass 2 kg is attached to a vertical spring and is displaced 0. 1m once it is attached is 196.

Given the mass of ball (m) = 2kg

The distance the ball displaced (x) = 0.1m

We know that from Newtons laws of motion F = ma where F is the force acting on an object a is the acceleration.

Here, since the ball is attached to the vertical spring the acceleration acting on the ball is due to gravity. So a = g = 9.8m/s^2.

The restoring force acting on the vertical spring is given as:

Fr = kx where k is spring constant and x is the distance the ball displaced.

As restoring force is balanced by the weight of the ball, Fr = F

Then mg = kx such that k = mg/x

k = 2 x 9.8 / 0.1 = 196

Hence the spring constant of the spring = 196

To learn more about spring constant click here https://brainly.com/question/14159361

#SPJ4

Answer:

Explanation:

Since F = ma

And a is 9.8

m = 2

F = 2*9.8

F = 19.6

Hookes Law:

F = kx

So 19.6 = k*0.1

So k = 196

Objects with masses of 232 kg and 538 kg are separated by 0.342 m. a 60.6 kg mass in placed midway between them. 538 kg 1232 kg 60.6 kg - 0.342 m. find the magnitude of the net gravitational force exerted by the two larger mnsses on the 60.6 kg mass. the value of the univorsal gravi tational constant is 6.672 × 10-in- m°/kg? answer in units of n 017.leaving che distance botron the 242 kg and che 538 koenasses fixed. at what distarco from the sas ke mass fother than tahinitely remote once) does the 60.6 ka mass experienco a net fored of pay?

Answers

No net force is experienced. To find the magnitude of the net gravitational force exerted by the two larger masses on the 60.6 kg mass, we can use the equation for gravitational force.

Gravitational force equation:

F = G * (m1 * m2) / r^2

Where F is the gravitational force, G is the universal gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them.

In this case, m1 = 232 kg, m2 = 538 kg and r = 0.342 m.

So, F = G * (232 kg * 538 kg) / (0.342 m)^2

Plugging in the values, we get:

F = 6.672 x 10^-11 N*(m^2)/(kg^2) * (232 kg * 538 kg) / (0.342 m)^2

The magnitude of the net gravitational force exerted by the two larger masses on the 60.6 kg mass is 0.092 N.

To find the distance at which the 60.6 kg mass experiences a net force of zero, we can use the equation for the gravitational force between two masses. Since the force is inversely proportional to the square of the distance between the masses, we can set the force to zero and solve for the distance.

F = G * (232 kg * 60.6 kg) / (r)^2 = 0

r = √((232 kg * 60.6 kg) / (G))

r = √((232 * 60.6) / (6.672 * 10^-11))

r = 2.36*10^-5 m

At this distance, the 60.6 kg mass experiences no net force from the two larger masses, as the gravitational force exerted by the 232 kg mass balances out the gravitational force exerted by the 538 kg mass.

Learn more about Gravitational force here:

https://brainly.com/question/12753155

#SPJ4

a proton is placed at point a. the proton is then removed and an electron is placed at point b. what is the direction of the electric force ? give angle relative to x with ccw as positive. what is the direction of the electric force ? what is true of the magnitude of the two forces?

Answers

When a proton is removed from point A and an electron is placed at point B, the direction of the electric force will be from point B towards point A. The angle of this force relative to the x-axis would be 180 degrees, with counterclockwise as positive.

As the electron and proton have equal and opposite charges, the magnitude of the force between them will be the same as the magnitude of the force between the proton and the electron.

The magnitude of the force between the proton and electron can be determined by Coulomb's law, which states that the force is proportional to the product of the charges and inversely proportional to the square of the distance between them.

In other words, the magnitude of the two forces is equal, but the direction of the two forces is opposite.

Learn more about Coulomb's law here: https://brainly.com/question/506926

#SPJ4

a tennis ball is struck horizontally from a height of 1 m. with this information alone, can we find how long the ball stayed airborne?

Answers

We cannot find how long the tennis ball that is struck horizontally from a height of 1 meter will stay airborne with the information given.

To determine the time of flight, we would need additional information such as the initial velocity of the ball, the angle at which it was struck, and the drag coefficient of the ball.

The horizontal component of velocity does not change under the influence of gravity alone, so we can't use it to determine how long the ball stays in the air. Also, we need to know the angle of launch and the drag coefficient of the ball to calculate the time of flight.

To learn more about velocity visit: https://brainly.com/question/23566308

#SPJ4

if you have two resistors, r1 and r2, connected in parallel. what is the maximum equivalent resistance possible?

Answers

If you have two resistors r1 and r2, connected in parallel, then the maximum equivalent resistance is approximately equal to the smallest value of r1 and r2.

Suppose we have two resistors r1 and r2, connected in parallel, then its equivalent resistance is:

1/r = 1/r1 + 1/r2

Notice that since it is a reciprocal equality, the maximum possible r will occur when one of 1/r1 or 1/r2 is equal to zero.

Let's assume 1/r2 = 0, then r = r1.

1/r2 = 0 will never be achieved, but for very large r2, we can expect:

1/r2 ≈ 0

It means, the possible maximum equivalent resistance is approximately equal to the smallest value of r1 and r2.

Example:

r1 = 2 Ohm, r2 = 10000 Ohm  

1/r = 1/2 + 1/10000

1/r = 5001/10000

r = 10000/5001 = 1.999  ≈  2 Ohm  ( which is approximately equivalent to r1)

Learn more about resistance here:

https://brainly.com/question/28523129

#SPJ4

a load of laundry consisting of cotton socks is placed in the dryer. an acrylic sock was accidently left in the dryer from the previous load. after the socks are dried, the socks are all charged with static electricity. what method of charging happened in the dryer.

Answers

The cotton socks are made of a natural material and the acrylic sock is made of synthetic material. When the socks are tumbled around in the dryer, the friction between the different materials causes electrons to transfer from the acrylic sock to the cotton socks. As a result, the cotton socks become negatively charged and the acrylic sock becomes positively charged. The static electricity observed is the result of the buildup of these opposite charges on the different materials.

What are Electrons?

Electrons are subatomic particles that carry a negative electric charge. They are found outside the nucleus of an atom, in the electron cloud or electron shell. Electrons are much lighter than the protons and neutrons that make up the nucleus of an atom, and they are negatively charged, while protons carry a positive charge.

The behavior of electrons is described by quantum mechanics. They occupy specific energy levels or orbitals around the nucleus of the atom, and their movement and behavior are governed by the laws of quantum mechanics.

Electrons are the fundamental building blocks of the atomic and subatomic world, which play a crucial role in the behavior and properties of matter.

To know more about atom visit: https://brainly.com/question/1566330

#SPJ4

Find the magnitude of the velocity of the of the chain when 5. 58 m of the chain is hanging vertically. Answer in units of m/s

Answers

The magnitude of the velocity of the of the chain when 5.58m of the chain is hanging vertically is 10.46m/s.

Given the length of chain (s) = 5.58m

We know that from Newtons second law of motion :

v^2 = u^2 + 2gs where v is the final velocity, u is the initial velocity and g is the acceleration due to gravity.

Here u = 0m/s as the chain is at rest initially.

So, v^2 = 0 + 2 x 9.8 x 5.58

v^2 = 109.368

v = √109.368 = 10.46m/s

Hence the magnitude of the velocity of the of the chain = 10.46m/s.

To learn more about velocity click here https://brainly.com/question/18084516

#SPJ4

You are pushing a book across a desk with a constant velocity. What are the forces acting on the book and in what direction? Are the y-forces equal in magnitude, why or why not? Are the x-forces equal in magnitude, why or why not? Explain using Newton’s Second Law. If you push on the book, according to Newton’s Third Law of Motion, what is the equal and reactive force?

Answers

When you are pushing a book across a desk with a constant velocity, there are two forces acting on the book: friction and the force of your push.

The force of friction acts in the opposite direction to the motion of the book and opposes the motion of the book. The force of friction is caused by the interaction between the bottom surface of the book and the surface of the desk.

The force of your push acts in the same direction as the motion of the book and causes the book to move.

The y-forces on the book are not equal in magnitude, as there is only one force acting in the y-direction, which is the force of friction. The x-forces are also not equal in magnitude, as there is one force acting in the x-direction, which is the force of your push.

According to Newton's Second Law, the force acting on an object is equal to the mass of the object multiplied by its acceleration. In this case, since the book is moving with a constant velocity, the forces acting on the book are balanced, and the net force on the book is zero.

According to Newton's Third Law of Motion, for every action, there is an equal and opposite reaction. So, when you push on the book, the equal and opposite force is the force exerted by the book on your hand.

Answer:

The book is being pushed from the side meaning there are horizontal forces at work. The first is an applied force, the second is a force of friction against the motion. Since the book is moving at a constant velocity, the book is not accelerating. This means that the forces must be balanced.

Have a Nice Day :  ) .

A rocket of mass 1000kg containing a propellant gas of 3000kg is to be launched vertically. If the fuel is consumed at a steady rate of 60kg/s, calculate the least velocity of the exhaust gases if the rocket and content will just lift off the launching pad immediately after firing?​

Answers

A 1000 kg rocket with a 3000 kg propellant gas is intended for vertical launch. If the gasoline is used consistently at a rate of.

What initiates the launch of a rocket?

When the upward force of thrust is higher than the downward force of gravity, a rocket is said to have launched. A rocket will speed upwards as a result of this imbalanced force. As long as the thrust of a rocket engine produces an upward force, a missile will continue to accelerate.

What forces are present when a rocket is launched?

A rocket experiences four forces while in flight: weight, velocity, and the aerodynamics of lift and drag. The weight's size is determined by the.

TO KNOW MORE ABOUT ENGINE VISIT:

https://brainly.com/question/10736767

SPJ1

what is the magnitude, in meters per squared second, of the acceleration of the jet as it accelerates along the deck?

Answers

With a=11.43 m/s2, option 4 is the proper response. The airplane accelerates to 160+ mph in less than two seconds during a catapult launch.

What is the most straightforward explanation of acceleration?

The speed about which velocity decreases is known termed accelerating. Acceleration typically indicates that the speed is changing, but not necessarily. An item that is moving in a circle while maintaining a constant speed is still accelerating because the direction of its motion is shifting.

What are two instances of acceleration?

An object's velocity may alter depending on whether it is moving faster, slower, or in a different direction. The moon orbiting the earth and an apple falling to the ground are two instances of acceleration.

To know more about Acceleration visit:

https://brainly.com/question/3046924

#SPJ4

A positively charged rod is brought near one end of an uncharged metal bar. The end of the metal bar farthest from the charged rod will be charged

positive.

negative.

neutral

Answers

The end of the metal bar farthest from the positively charged rod will be negatively charged.

What is the initial charge of the metal bar before the rod is brought near?

The initial price of the metal bar earlier than the rod is delivered near is uncharged. That is specific inside the trouble assertion, wherein it's far said that the steel bar is uncharged before the undoubtedly charged rod is brought close to. The steel bar is taken into consideration as a impartial item earlier than the creation of the charged rod. It method that the wide variety of protons and electrons inside the metallic bar are identical, so there's no internet rate. Therefore, the initial price of the steel bar earlier than the rod is brought close to is uncharged.

To know more about Protons visit: https://brainly.com/question/12535427

#SPJ4

what is the transition from ocean to cloud

Answers

Answer:

In Explanation

Explanation:

The transition from ocean to cloud refers to the process by which water vapour in the ocean rises and condenses into clouds. This process is known as evaporation and is a key component of the water cycle.

Evaporation occurs when the sun's energy heats the surface of the ocean, causing water molecules to gain enough energy to escape into the atmosphere as water vapour. As the water vapour rises, it cools and condenses into tiny droplets, which form clouds. The clouds can be made of water droplets or ice crystals, and they can be observed in the sky in different forms, such as stratus clouds, cumulus clouds, and cirrus clouds.

This process is important for the climate and weather, as clouds play a critical role in regulating the Earth's temperature by reflecting and absorbing solar radiation. Clouds also affect precipitation, as the droplets or crystals in the clouds grow and fall as rain or snow. The transition from ocean to the cloud is also important for the water cycle as precipitation, either in form of rain or snow, replenishes the water in the oceans and rivers.

In summary, the transition from ocean to the cloud is the process by which water vapour in the ocean rises and condenses into clouds, known as evaporation, and is a key component of the water cycle. This process is important for the climate and weather, as clouds play a critical role in regulating the Earth's temperature and affecting precipitation, and replenishing the water in the oceans and rivers.

(Please give brainlist)

. In a railroad yard, a train is being assembled. An empty boxcar, coasting at 3.0 m/s, strikes a
loaded car that is stationary, and the cars couple together. Each of the boxcars has a mass of 9000
kg when empty, and the loaded car contains 55,000 kg of lumber. what is
the final velocity

Answers

The final velocity of the two coupled cars is 1.2 m/s.

What is the final velocity of the two coupled cars?The final velocity of the two coupled cars when the empty boxcar strikes the loaded car is determined by the conservation of momentum.Momentum is defined as the product of mass and velocity and is conserved in an isolated system. Since the system of the two cars is considered isolated, the total momentum before the collision is equal to the total momentum after the collision.The total momentum before the collision is equal to the momentum of the empty boxcar. The momentum of the empty boxcar is equal to 9000 kg multiplied by 3.0 m/s, which is 27000 kg m/s.The total momentum after the collision is equal to the sum of the momentum of the loaded car, which is 55000 kg multiplied by 0 m/s, and the momentum of the two coupled cars.The final velocity of the two coupled cars is determined by solving for the velocity in the equation 27000 kg m/s = (9000 + 55000) kg multiplied by v, with v being the final velocity of the two coupled cars. The final velocity of the two coupled cars is equal to 2.4 m/s.

To learn more about The final velocity refer to:

https://brainly.com/question/25905661

#SPJ1

what is the repulsivee electrical force between two protons 5.0*10^-15m apart from each other in an atomic nucleus?

Answers

The repulsive electrical force between two protons is 3.6 × 10³⁹ N. The result is obtained by using the formula for electrostatic.

What is the formula for electrostatic force?

The formula for electrostatic force is

F = kq₁q₂/r²

Where

F = electrostatic force (N)k = Coulomb's constant (9 × 10⁹ Nm²/C²)q₁ and q₂ = charges (C)r = distance between the charges (m)

Two protons are apart from each other in an atomic nucleus. The distance between them is 5.0 × 10⁻¹⁵ m.

Find the repulsive electrical force!

Proton has a charge of +1. So, the electrostatic force would be

F = kq₁q₂/r²

F = 9 × 10⁹(1)(1)/(5.0 × 10⁻¹⁵)²

F = (9 × 10⁹)/(2.5 × 10⁻³⁰)

F = 3.6 × 10³⁹ N

Hence, the two protos has repulsive electrical force of 3.6 × 10³⁹ N.

Learn more about electrostatic force here:

brainly.com/question/30365500

#SPJ4

What is the electric flux through one side of a cube that has a single point charge of -3. 80 µC placed at its center? Hint: You do not need to integrate any equations to get the answer.

? N·m^2/C

Answers

The electric flux through one side of a cube is found as -7.1 x 10⁴ V.m.

Explain the term Gauss's Law?According to Gauss's law, the enclosed charge is the only factor affecting the electric flux across a closed surface. Furthermore, no matter how the closed surface is shaped, the electric flux for a point charge remains constant.

The equation is given by

ФE = q(int) / ∈₀

ФE = electric flux passing any of the surface

q(int) = charge enclosed by surface = -3. 80 µC

∈₀ = 8.85 x 10⁻¹² F/m (permittivity of free space)

Put the given values.

ФE = -3. 80 x 10⁻⁶ /8.85 x 10⁻¹² / 6 (for one surface of the cube)

ФE = -7.1 x 10⁴ V.m

Thus, the electric flux through one side of cube is found as -7.1 x 10⁴ V.m.

To know more about the Gauss's Law, here

https://brainly.com/question/14767569

#SPJ4

How many joules of solar energy fall on your back as you work on your tan for 1. 5 h ? express?

Answers

It is not possible to determine the exact amount of solar energy in joules that falls on an individual's back while they are sunbathing without additional information such as the individual's location, the time of day, and weather conditions.

How does the duration of time spent tanning affect the amount of solar energy absorbed by a person's skin?

The duration of time spent tanning directly affects the amount of solar energy absorbed by a person's skin. The longer a person is exposed to the sun, the more solar energy their skin absorbs. This is because the skin's melanin production increases as it is exposed to the sun's UV rays for longer periods of time. Additionally, the amount of solar energy that reaches the skin's surface increases with longer exposure as the sun's position in the sky changes. It is important to note that prolonged sun exposure can also increase the risk of skin damage and skin cancer. Therefore, it is recommended to limit sun exposure and use sunscreen to protect the skin.

To know more about Solar Energy visit: https://brainly.com/question/9704099

#SPJ4

Please help!!!!!!!!!!!!!!!

Answers

Answer:

1. The properties of ionic compounds are:

a. Ionic compounds usually exist in the form of crystalline solids at room temperature.

b. Ionic compounds are soluble in water.

c. Ionic compounds have high melting and boiling points

d. Ionic compounds don't conduct electricity in solid state.

e. The ions of ionic compound crystals are orderly arranged.

2. The properties of covalent compounds are:

a.Covalent compound generally exist in liquid and gaseous state.

b. They are poor conductor of elctricity.

c. Melting and boiling points of covalent compounds are lower than ionic compound.

d. They are generally soluble in non- polar solvents such as benzene.

e. They are made up of molecules held together by weak Vanderwaal's force of attraction.

3. Salt is a covalent compound.

4. Sugar is an ionic compound.

Rest of the assignment is practical. Do at a Lab.

a photoelectric experiment is performed by separately shining a laser at 450 nm (blue light) and a laser at 560 nm (yellow light) on a clean metal surface. assume that each laser is above the threshold frequency and delivers the same number of photons per second. a. which laser will eject more electrons per second? b. which laser will eject electrons with greater kinetic energy? c. which laser will eject electrons with shorter de broglie wavelength?

Answers

The same amount of energy is delivered to the metal surface by each laser, then the yellow light must be of higher intensity than the blue light. The yellow light must generate more electrons. The blue light has a lower wavelength, then the ejected electrons must have a higher kinetic energy.

What is meant by electrons?

A negatively charged subatomic particle known as an electron can either be free or attached to an atom (not bound).One of the three main types of particles inside an atom, along with protons and neutrons, is an electron that is linked to the atom.The nucleus of an atom is made up of electrons, protons, and neutrons together.The negatively charged particles known as electrons revolve around the outside of the nucleus.For scientists, it can be challenging to monitor them because of how quickly they spin.The tiniest particles in an atom, you can put 2000 of them into a proton, they are drawn to the positive charge of the protons.

To learn more about  electron refer to

brainly.com/question/26084288

#SPJ4

A mass on a string of unknown length oscillates as a pendulum with a period of 6. 6 s. Parts A to D are independent questions, each referring to the initial situation.

What is the period if the mass is doubled?

What is the period if the string length is doubled?

Answers

The time period is not depends on the mass. So even the mass is doubled its time period not changes. The period of a simple pendulum is given by the equation T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.

A. In this equation, the mass does not appear, so doubling the mass of the pendulum does not affect the period. If the mass of the pendulum is doubled, the period of the pendulum will remain the same.

B. If the length of the pendulum's string is doubled, the period will also be doubled. The period of a simple pendulum is given by the equation T = 2π√(L/g),

where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity. Doubling the length of the pendulum increases the length by a factor of 2, which increases the period by a factor of 2.

What is Pendulum?

A pendulum is a weight suspended from a pivot so that it can swing freely. The weight, also known as a bob, is the object that oscillates (moves back and forth) under the influence of gravity. Pendulums can be used to measure time, as in the case of a grandfather clock, or as a simple device to demonstrate harmonic motion.

The force acting on the pendulum is gravity, which is pulling the bob downward. This force is opposed by the tension in the string or rod that is holding the bob. The bob has kinetic energy when it is moving, and potential energy when it is at the highest or lowest point of its swing. As the bob swings back and forth, its kinetic and potential energy are constantly changing.

Learn more about gravity  :

brainly.com/question/14874038

#SPJ4

Cart 1 is 6 kg and traveling at 3 m/s to the right. It collides with cart 2, which is 4 kg and traveling 4 m/s to the left. After the collision, cart 1 is moving at 4 m/s to the left. What is the velocity of cart 2?

Answers

The velocity of cart 2 will be 2.5m/s

Explain collision

A collision is a brief interaction between two or more bodies that modifies their motion due to internal forces acting between them. the forces at work during collisions (there is a change in velocity).

Primary collision types include the following: Elastic collisions: Both momentum and kinetic energy remain constant. Only momentum is conserved during inelastic collisions. The kinetic energy is lost in collisions that are perfectly inelastic, causing the objects to stick together after the collision.

Before collision :

m1 = 6kg

v1 = 3m/s

p1 = m1v1 = 3*6 = 18kg*m/s

m2 = 4kg

v2 = 4m/s

p2 = m2v2 = 4*4 = 16kg*m/s

Δp1 = p1 + p2

After collision :

m1 = 6kg

v1 = 4m/s

p1 = m1v1 = 6*4 = 24kgm/s

m2 = 4kg

v2 =?

p2 = m2v2 = 4*v2 kgm/s

Δp2 = p1 + p2

We know Δp1 = Δp2

So, 18 + 16 = 24 + 4v2

4v2 = 34-24 = 10

v2 = 10/4 = 2.5m/s .

To learn more about kinetic energy use link below:

brainly.com/question/25959744

#SPJ4

A 1.68 x 10-15 N oil drop is suspended between two oppositely-charged parallel plates. The plates are 4.0 cm apart and there is a potential difference of 140 V between them. The top plate is positive and the bottom plate is negative.

a) Sketch the electric field between the plates.

b) Calculate the magnitude of the electric field between the plates.

c) Determine the charge on the oil drop. Include the SIGN.

d) How many electrons is this charge composed of?

Answers

A magnetic field is created between these two charged parallel plates. The field indicates a direction from the positive plate to the negative plate.

What is a positively charged plate?Protons are in excess on a positively charged metal plate. From the electron's point of view, a positively charged aluminium.The force acting on a positively charged test particle is considered to constitute the definition of the field's direction. Positive charges always gravitate away from other positive charges and in the direction of negative charges.The separator, which is made of polyethylene, divides the positive and negative plates to allow for an effective flow of electrical current.The density of surface charges on a negatively charged plate is 2 x 10-6 C/m2. The least initial distance that an electron must travel if it is travelling toward a plate with 200 eV of energy but cannot strike the plate is: 1,77 mm, 3,51 mm, and 1,77 cm, 3,51 cm.

To learn more about parallel refer to:

https://brainly.com/question/26871451

#SPJ1

A block is on a surface with

is = 0. 325. It takes 4. 11 N to

break it free from static friction.

How much normal force acts

on the block?

(Unit = N)

Answers

The normal force acting on the block is 4.11N/0.325 = 12.68N.

Can you explain the difference between static friction and kinetic friction?

Static friction is the force that opposes to the motion of an object when it is at rest. It acts between two surfaces that are in contact and are not moving relative to each other. The force of static friction is always less than or equal to the limiting friction, and it is needed to move an object to overcome the static friction and start moving.

On the other hand, kinetic friction is the force that opposes to the motion of an object when it is in motion. It acts between two surfaces that are in contact and are moving relative to each other. The force of kinetic friction is always less than the static friction and it is needed to maintain the motion of an object. In general, the coefficient of kinetic friction is lower than the coefficient of static friction.

To know more about Static Friction visit: https://brainly.com/question/13000653

#SPJ4

The normal force acting on the block is 12.68N when block is on a surface with is = 0. 325. It takes 4. 11 N to break it free from static friction.

Evaluating :

Surface = 0.325

force = 4.11 N

Static friction =      4.11N/0.325

                                  = 12.68N.

Static friction :

Static friction is the force that opposes to the motion of an object when it is at rest. It acts between two surfaces that are in contact and are not moving relative to each other. The force of static friction is always less than or equal to the limiting friction, and it is needed to move an object to overcome the static friction and start moving.

Kinetic friction :

On the other hand, kinetic friction is the force that opposes to the motion of an object when it is in motion. It acts between two surfaces that are in contact and are moving relative to each other. The force of kinetic friction is always less than the static friction and it is needed to maintain the motion of an object. In general, the coefficient of kinetic friction is lower than the coefficient of static friction.

Learn more about Static Friction :

brainly.com/question/13000653

#SPJ4

How much power is used if a truck does 50 joules of work in 10 seconds to tow a car?​

Answers

The truck does 50 joules of work in 10 seconds, so the power used is 5 Watts (W) i.e, 5J/s (Joules per second) .

Evaluating power :

The truck does 50 joules of work in 10 seconds, so the power used is:

                    Power = 50J/10s = 5J/s (Joules per second)

                               = 5 Watts (W)

It is important to note that the power is a scalar quantity and its unit is Joules per second (J/s) or watts (W).

Alternatively, you can derive power in terms of force and velocity as well as                                   P=F × v.

What is Power?

Power is a measure of the rate at which work is done. It is the amount of energy that is used over time. It is a scalar quantity and it has units of Joules per second (J/s) or Watts (W). Work is defined as the transfer of energy from one place to another or the transfer of energy from one system to another. Power is a measure of how fast that work is being done. For example, if a machine does a lot of work in a short amount of time, it has a high power rating.

Power can be calculated by using the formula:

                    Power = Work / Time

Where Work is the amount of energy that is transferred and Time is the amount of time over which the work is done.

Learn more about Joules :

brainly.com/question/18498239

#SPJ4

a car, on a straight road, is stopped at a traffic light. when the light turns to green the car accelerates with a constant acceleration. it reaches a speed of 23.7 m/s (85.3 km/h) in a distance of 146 m. calculate the acceleration of the car.

Answers

The acceleration of the car is 146.3 m/s². The result is obtained by using the formula for acceleration.

What is acceleration?

Acceleration is the rate of change in velocity of an object with respect to time. It can be expressed as

[tex]\bar{a} = \frac{\Delta v}{\Delta t}[/tex]

Where

a = accelerationΔv = change in velocityΔt = change in time

A car stopped and moves with a constant acceleration. It means that the car moves from rest. We have

Initial speed, v₁ = 0Final speed, v₂ = 23.7 m/sDistance, Δx = 146 m

The change in time is

Δt = Δv/x

Δt = (v₂ - v₁)/Δx

Δt = (23.7 - 0)/146

Δt = 0,162 s

The acceleration of the car would be

[tex]\bar{a} = \frac{\Delta v}{\Delta t}[/tex]

[tex]\bar{a} = \frac{23.7 - 0}{0.162}[/tex]

[tex]\bar{a} = 146.3 m/s^{2}[/tex]

Hence, the car has an acceleration of 146.3 m/s².

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ4

two identical air-hockey pucks are moving on an air-hockey table with an x-y axis drawn upon it. puck a has a velocity of 5 m/s at an angle of 35 degrees above the x-axis. puck b has a velocity of 6 m/s at an angle of 70 degrees above the x-axis. which puck has a larger momentum in the x-direction?

Answers

Puck B has a larger x-direction momentum as it has a greater velocity in the x-direction.

The momentum of a puck is determined by its mass, velocity, and direction. Since both pucks have the same mass, the one with the greater velocity in the x-direction will have the larger x-direction momentum.

Puck A has a velocity of 5 m/s at an angle of 35 degrees above the x-axis. When the velocity is resolved along the x-axis, this gives a velocity of 4.39 m/s in the x-direction.

Puck B has a velocity of 6 m/s at an angle of 70 degrees above the x-axis. When the velocity is resolved along the x-axis, this gives a velocity of 4.83 m/s in the x-direction.

Therefore, Puck B has a larger x-direction momentum as it has a greater velocity in the x-direction.

Learn more about velocity:

https://brainly.com/question/25749514

#SPJ4

The metal wing of an airplane acts like a ""wire"" flying through Earth’s magnetic field. A voltage is induced between the wing tips, and a current flows along the wing, but only for a short time. Why does the current stop even though the airplane continues flying through Earth’s magnetic field?

Answers

The current stop even though the airplane continues flying through Earth’s magnetic field because of Lenz's Law and the function of diode.

The current stops flowing even though the airplane continues flying through Earth's magnetic field because the current generates its own magnetic field that opposes the external magnetic field that induced it. This opposing magnetic field is known as Lenz's Law, which states that the direction of induced current is always such as to oppose the change in magnetic flux that causes it. As the current flows along the wing, it creates a magnetic field that opposes the external magnetic field. This opposing magnetic field reduces the external magnetic field, which then reduces the induced voltage, and thus reduces the induced current. Eventually, the induced current reaches a point where it is no longer able to maintain a sufficient opposing magnetic field, and it stops flowing. Additionally, in airplane, there is also a device called diode which is used to rectify the induced alternating current(AC) to direct current(DC) and it only allows current to flow in one direction and stops the current flowing in the opposite direction, which also causes the current to stop flowing. In summary, the current stops flowing in the airplane's wing because of Lenz's Law and the function of diode.

To know more about magnetic field please refer: https://brainly.com/question/23096032

#SPJ4

if the solar system was the size of a basketball how far away would the closet star be the closest sun be

Answers

The closest star to the Sun is Proxima Centauri, which is about 4.24 light-years away from the Sun. If the Solar System was the size of a basketball, Proxima Centauri would be about 7,967,077,874,073.7 miles away.

That means that Proxima Centauri would be about 5,305,000 times farther away from the Solar System than it is in reality. To put this in perspective, light travels at 186,000 miles per second. It would take Proxima Centauri's light over 8 years to reach the Solar System if it was the size of a basketball. That's over 3 thousand times longer than it would take in reality!

Learn more about solar system:

https://brainly.com/question/27938451

#SPJ4

A child with kwashiorkor has a swollen belly appearance due to:

a. Not eating enough protein to synthesize proteins needed to maintain fluid balance or transport fat from the liver.

b. Not eating enough protein to maintain lean body mass.

c. Eating too much starchy gruel.

d. Eating too many fatty foods

Answers

The correct option: a. Not eating enough protein to synthesize proteins needed to maintain fluid balance or transport fat from the liver.

Explain the causes for the kwashiorkor?

Kwashiorkor is a nutritional condition most frequently observed in areas undergoing famine. It is also known as "edematous malnutrition" due to its relationship with edoema (fluid retention).

It is a type of malnutrition brought on by a diet low in protein. All body parts of those with kwashiorkor are often exceedingly emaciated, with the exception of their ankles, toes, and bellies, which expand with fluid.Kwashiorkor is brought on by a diet that is deficient in protein.This continuous cell regeneration occurs in a healthy human organism. Additionally, protein is crucial for growth during pregnancy and youth. Lack of protein will cause the body to start shutting down its regular processes, including growth, and kwashiorkor may appear.

Thus, a child with kwashiorkor will appear to have a bloated stomach as a result of: Not consuming enough protein to create the proteins required to keep the body's fluid balance or move fat from the liver.

To know more about the kwashiorkor, here

https://brainly.com/question/17081146

#SPJ4

Other Questions
Triangle A C B is cut by line segment E D. Line segment E D goes from side B C to side A C. The length of B A is 4 x minus 6 and the length of E D is x + 2. The length of B E is x. Sides B E and E C are congruent. Sides A D and D C are congruent.What is the length of BC?From the markings on the diagram, we can tell E is the midpoint of BC and D is the midpoint of ACWe can apply the theorem: ED = One-halfBA.Substituting in the expressions for the lengths and solving for x, we get x = .Now, since BE = x, then BC = . Jose has scored 320 points on his math tests so far this semester. To get an A for the semester, he must score at least 389 points. Part 1 out of 2 Enter an inequality to find the minimum number of points he must score on the remaining tests in order to get an A. Let n represent the number of points Jose needs to score on the remaining tests. The inequality is + n (select) HELP ME WAAKAIAKAKAKAK Your workouts should include elements of which of the following? which of the following divisions would you continue to run in order to earn profits to invest in other businesses? a. freight forwarding b. cargo inspection c. railroad loading d. shipping In contextualizing the Civil War, Lincoln urges listeners to recall the principles upon which the United States was founded. In the context of this article, how has America changed over time? Draw the missing intermediate and add curved arrows for the production of phenylethyne by the double dehydrohalogenation of 2,2-dibromoethylbenzene. Note that, although stereochemistry is not graded, it is an important part of the mechanism A bag of m & m is dumped on the table and you count 82 blue pieces.approximately how many m&ms do you expect to be in the entire bag based on the entire class. Round to the nearest whole m&m Quadrilateral U is a scaled copy of quadrilateral T.What scale factor takes quadrilateral T to quadrilateral U? people who commit acts of targeted violence usually plan out the attacks and often tell someone about their plans. to an economist, scarcity means that group of answer choices there are some things on which it is impossible to put a price, such as human life. many goods are worth an infinite amount and, therefore, should be supplied free to everyone. people are generally too poor to afford the goods and services available. the human desire for goods exceeds the amount freely available from nature. Assume that K and M are two unlinked genes that affect hearing. The dominant K allele is necessary for hearing, and the dominant M allele causes deafness regardless of the other genes present. What fraction of the offspring of parents with the genotypes KkMm and Kkmm will most likely be deaf?**Please draw the punnet sqaure and explain the answer in detail.a) 1/4b) 3/8c) 1/2d) 5/8 A soft ball pitcher applies 4N of force to a softball for 0.5 seconds. What is the objects momentum Read each question and discuss it with your classmates. Then write down the answers your group comes up with. If your learning situation doesn't allow for group discussions, ask your instructor whether you can answer the questions on your own.1. An author's perspective is influenced partly by life experiences. Give an example of a life experience from "The Struggle for an Education" that shows a change in Washington's perspective. in which of the following type of economies are property rights protected, helping to achieve greater economic growth rates than in other economies where property rights are poorly protected? group of answer choices mixed market free market command . A stuntman rode his motorcycle for seven straight hours on the wall of a large vertical cylinder.His average speed was 45 km/hr. Suppose that in a time of 30 seconds, he increases his speedsteadily from 8.3 m/s to 11.7 m/s while circling inside the cylindrical wall. How far does hetravel in the time interval in meters? Answers for Predicting Products of Chemical Reactions a 10-month-old infant has poor weight gain, a persistent cough, and a history of several bouts of pneumonitis. the mother describes the child as having large, foul-smelling stools for months. which of the following diagnostic studies is likely to result in the correct diagnosis of this child? During the middle ages, Japan, China and Korea influence, one another by sharing ideas and cultures identify the correct location of each country on the map Determine the intercepts of the line.Do not round your answers.y=-3x+12y-intercept:x-intercept: Classify each statement or picture as applying to gram-positive bacteria, gram-negative bacteria, or both.