calculate the velocity and kinetic energy with which electrons strike the target of an x-ray tube operated at 50,000 volts. what is the short-wavelength limit of the continuous spectrum emitted and the maximum energy per quantum (in joules) of radiation?

Answers

Answer 1

The kinetic energy is  8 × 10⁻¹⁵ J , the velocity equals 1.3 × 10⁸  m/s, and the wavelength is 0.248A°, according to the provided statement.

What wavelength is it?

A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent emblems) in the consecutive cycles. This length is typically specified in wireless systems in metres (m), centimeters (cm), or millimeters (mm) (mm)

What is the wavelength measured in?

The wavelength in the SI system is measured in meters, commonly abbreviated as m. The multiples or decimals of a metre are also used to measure wavelength. Notably, when wavelengths are a significant feature, hyperbolic factors of 10 are used.

Briefing:

Kinetic energy = charge × potential difference

Here , charge on electron = 1.6 × 10⁻¹⁸C

Potential difference = 50,000 volts

So, Kinetic energy = 1.6 × 10⁻¹⁹C × 50,000 volts = 8 × 10⁻¹⁵ J

We know,

Kinetic energy = 1/2mv²

8 × 10⁻¹⁵ = 1/2 × 9.1 × 10⁻³¹ × v² [ ∵ m is the mass of electron , e.g., 9.1 × 10⁻³¹ Kg]

v² = 16/9.1× 10¹⁶

v ≈ 1.3 × 10⁸ m/s

As a result, the target is struck by the striking electron with a speed of  1.3 × 10⁸ m/s

Now, wavelength = λ

hc/λ = kinetic energy

1/λ = 8 × 10⁻¹⁵/6.626 × 10⁻³⁴ × 3 × 10⁸

λ = 6.626 × 3 × 10⁻²⁶/8 × 10⁻¹⁵ = 0.248 × 10⁻¹⁰ m

hence, wavelength is 0.248A°

to know more about wavelenght visit:

https://brainly.com/question/1263539

#SPJ4


Related Questions

two capacitors of values of 1.0 μf and 0.50 μf are connected in parallel. the system is hooked up to a 100 v battery. find the electrical potential energy stored in the 1.0 μf capacitor.

Answers

The potential energy stored in the 1 μF capacitor is 4.5 x 10^-18 J.

What is potential energy?

Potential energy is the form of stored energy that depends on the interactions of various system elements. A spring's potential energy rises when it is crushed or stretched.

The energy stored in the 1.0 μF capacitor is 9.0*10^-5J

Data given;

c₁ = 1.0 μF

c₂ = 0.50 μF

V = 100 v

Calculation for Capacitor:

as given the capacitors are in series, the total capacitance is;

C = 1/c1 + 1/c2

C = 3 μF

The capacitance in the capacitor is 3 μF.

The charge of a capacitor is given as:

[tex]q = cV[/tex]

[tex]q = (3.0 \times 10^{-6}) 100[/tex]

[tex]q = 3 \times 10^{-4}[/tex] C

Calculation of Potential Energy:

The energy stored in the capacitor can be calculate as:

U = (1/2)q²c

Here, U = potential energy, q = charge, C = capacitor.

We can now proceed to use this formula and solve for the potential energy stored in the 1.0mF capacitor.

[tex]U = \frac{1}{2} (10^{-6})(3\times 10^{-6})^2[/tex]

[tex]U = 4.5 \times 10^{-18}[/tex]

From the calculations above, we can conclude that the potential energy stored in the 1mF capacitor is 4.5 x 10^-18 J.

To know more about potential energy, go to link

https://brainly.com/question/14427111

#SPJ4

how much force is the person exerting toward the right (the force that would go towards trying to move the car)?

Answers

Newton's second law of motion gives the following definition of the force formula: "Force exerted by an object equals mass times that object's acceleration." F = m ⨉ a.

To apply this formula, you must use SI units for force (newtons), mass (kilograms), and acceleration (meters per second squared). Every automobile, truck, boat, helicopter, plane, and even spacecraft, Lift, Weight, Thrust, and Drag Newton's first law states that your body, like all mass, tries to remain in its current location. Your body attempts to stay where it was, which is on the left, if the car turns to the right. If an object is travelling and its mass is m, its rate of slowing down is v, and the time it takes is t, then.

Learn more about force here-

https://brainly.com/question/13191643

#SPJ4

you are using your calculator in a room illuminated by a 120 w bulb 2.8 m away. assume the light bult is designed to send the light uniformly into a hemisphere. the solar cells have an active area of 3 cm2. if the solar cells are 15% efficient, how much electrical power is the calculator receiving in mw?

Answers

If the solar cells are 15% efficient, the electrical power that the calculator is receiving is 0.10962mW.

What is solar cells?

It is a photovoltaic cell, an electronic device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical and chemical phenomenon.

So, the solar cells on your calculator will trap solar energy and convert it into electrical energy to give power your calculator's liquid display.


How to calculate the electrical power that the calculator will receive?

P = 120W

r = 2.8m

A = 3cm² = 3 * 10^-4 m²

Intensity = 15/100 * P/4*π*r^2

= 0.15 * 120 / 0.5 * 4π * 2.8²

I = 0.3654 W/m^2 (rounded)

Received power = I * A

= 0.3654 * 3 * 10^-4

= 1.0962 * 10^-4 W

= 0.10962 mW

Learn more about solar cells https://brainly.com/question/29553595

#SPJ4

image shows a light ray as the ray of incidence traveling into water coming from air. three refracted rays are shown. ray a is bent towards the normal, ray b is unchanged from the incident ray, and ray c is bent away from the normal. which of the rays drawn above would be correct as the light goes from the air into the water? (5 points)

Answers

It continues to move in a new angle or direction as it slows down.

When a light ray travels from a rarer medium to a denser medium, it bends toward the normal to the boundary between the two media due to refraction.

Refraction is the bending of light beams when they pass through a medium with a variable speed. When a light ray travels from a rarer medium to a denser medium, it bends toward the normal to the boundary between the two media due to refraction. The indices of refraction of the two mediums affect how much bending occurs. As a result, when an airborne light beam encounters a denser material, it bends in the direction of normal.

To learn more about refraction of light visit:

https://brainly.in/question/37959474

#SPJ4

the power-factor-correction circuit shapes the inductor current to appear as if a resistive load was connected at the output of the diode rectifier. A. true B. False

Answers

The power-factor-correction circuit shapes the inductor current to appear as if a resistive load was connected at the output of the diode rectifier. It is false.

Power Factor Correction may be a technique that employments capacitors to decrease the receptive power component of an AC circuit to improve its efficiency and reduce current. A power factor correction (PFC) circuit is included in a control supply circuit to bring its power factor close to 1.0 or reduce harmonics. Many electronic circuits have a capacitor at the input of the control supply to function with DC voltage. This capacitor might cause a phased move between the sinusoidal AC control supply voltage and current and the control to calculate (PF) will drop. A power factor correction (PFC) circuit diminishes the harmonic twisting within the supply current and makes a current waveform near a crucial sine wave in arrange to extend the power  calculation to unity.

to know more about  circuit refer to the link brainly.com/question/12608491

#SPJ4

a centrifuge in a medical laboratory rotates at an angular speed of 3650 rev/min. when switched off, it rotates 54.0 times before coming to rest. find the constant angular acceleration of the centrifuge.

Answers

According to the query, the centrifuge's constant angular acceleration is -305.14 rad/s².

What kinds of centrifuges are there?

Micro centrifuges and tabletop centrifuges are the two main types of centrifuges. Both of these are to use for sample extraction by rotating the specimens in a contained receptacle at such a high speed. Their sample capacities and rotor types differ, though.

Briefing:

The number of rotation is n = 3650 rev/min

Therefore n = 60.83 rev/sec

ω initial = 2πn

             = 382.012 rad/s

ω final = 0

∅ = 2πn

  = 2*3.14*54

  = 339.12 rad

ω final² = ω initial² + 2a∅

a = (ω final² - ω initial²)/2∅

a = (0 - 382.012²)/2(339.12)

a = -305.14 rad/s²

To know more about Centrifuge visit:

https://brainly.com/question/17065689

#SPJ4

a tire swing hanging from a branch reaches nearly to the ground (see the photo above). how could you estimate the height of the branch using only a stopwatch?

Answers

We may determine the height of the branch using the pendulum's expression of time period. The swinging tyre can be compared to the pendulum's swinging bob. Here, the pendulum's length will match the height of the branch.

So let h be. From the formula for the pendulum's duration, let T denote the time period of the tire's swing.

T = 2π√l/g where l is length of pendulum

l = h so

T = 2π√h/g

h = T^2g/4π^2

Calculating the tyre swing time allows us to determine the height of the branch.

A stop watch can be used to estimate the length of the tyre swing. Time period is the length of time it will take the tyre to go from one extreme to the other before returning.

Learn more about Time period here:

https://brainly.com/question/24255969

#SPJ4

In comparing two unequal forces on a rigid body, is it possible to have the larger force produce less torque than the smaller force?.

Answers

Yes, in comparing two unequal forces on a rigid body, it is  possible to have the larger force produce less torque than the smaller force.

How is the possibility for difference in torque explained ?The equation used to calculate the amount of torque given the amount of force and the separation between the force's point of application and its axis of rotation is given by,

                            [tex]\tau = Fd[/tex]

We can see from this equation that the torque magnitude depends on both the force magnitude and the perpendicular angle  between the force application point and the axis of rotation. This indicates that ,it is possible for a larger force to create less torque than a smaller force.This is  principally as a result of the separation between the places of application of the two forces from the axis of rotation. For instance, on a see-saw, if one person is significantly farther away from the fulcrum than the other, the heavier person can be lifted or balanced by the farther person.

To learn more about torque, refer:

https://brainly.com/question/20691242

#SPJ4

an irregularly shaped object 10. m long is placed with each end on a scale. if the scale on the left reads 74 n and the scale on the right reads 93 n how far from the left is the center of mass?

Answers

The center of mass of an irregularly shaped object 10 m long that is placed with each end on a scale from the left is 5.57 m

Let the object length be L.

L = 10 m

Let the distance from center of mass to the right end be x. The irregular shaped object exerts an upward force on both left and right side.

Fl = 74 N

Fr = 93 N

Since the object is at rest,

τ = 0

Fr * x - Fl ( L - x ) = 0

93 x = 74 ( 10 - x )

93 x = 740 - 74 x

167 x = 740

x = 4.43 m

Distance from left end = L - x

d = 10 - 4.43

d = 5.57 m

To know more about center of mass

https://brainly.com/question/8662931

#SPJ4

a 160 kg lineman moving west at 2 m/s tackles an 88 kg football fullback moving east at 5 m/s. after the collision, both players move east at 2 m/s

Answers

320 kg.m/s is the momentum of lineman (p)lineman =mv and 440 kg.m/s is the momentum of football fullback (p)fullback =mv.

What is change in momentum after collision?

Whenever to body collides there is no change in the momentum of the body as momentum of body is equal to the momentum before the collision to the momentum after the Collison.

As per the given data:

Mass of lineman=  160 kg

velocity  of lineman=2m/s

mass of fullback=88 kg

velocity=5 m/s

now momentum of lineman (p)lineman =mv

(p)lineman =160*2

(p)lineman =320 kg.m/s

now momentum of football fullback (p)fullback =mv

(p)fullback =88*5

(p)fullback =440 kg.m/s

now both travelling towards each other so final momentum after collision = 440-320

=120 kg.m/s

hence, the final momentum = 120 kg.m/s after collision .

To know more about momentum visit

https://brainly.com/question/24030570

#SPJ4

at what angle is the first-order maximum (constructive interference), not counting the center bright region, for 450-nm wavelength blue light falling on double slits separated by 0.0500 mm? give your angle in degrees.

Answers

The angle of the first-order maximum (constructive interference) for 450-nm wavelength blue light falling on double slits separated by 0.0500 mm is 10.47 degrees.

The angle of the first-order maximum can be calculated using the formula,

θ = mλ/d

Where θ is the angle

m is the order of the maximum

λ is the wavelength

d is the slit separation.

Plugging in the given values, we get:

θ = 1 * 450 nm / 0.0500 mm

θ = 9000 nm/mm

Converting to degrees, we get:

θ = 9000 nm/mm * (1 rad/1000 nm) * (180°/π rad)

θ = 10.47 degrees

Therefore, the angle of the first-order maximum (constructive interference) for 450-nm wavelength blue light falling on double slits separated by 0.0500 mm is 10.47 degrees.

Learn more about constructive interference here:

https://brainly.com/question/13657481

#SPJ4

You are a crash test analyst for Toyota. Car 1 (mass = 900 kg) is at rest while Car 2 (mass = 1700 kg) is traveling toward Car 1 at 15.0 m/s. The two cars collide and and their bumpers stick together. What is the resulting momentum after the collision?

Answers

The momentum after the collision is 25500 kg⋅m/s. Each object's momentum may change, but the overall momentum must not change.

What is Momentum ?

In Newtonian mechanics, momentum is calculated as the sum of an object's mass and velocity. It has a magnitude and a direction, making it a vector quantity.

The rate of change of a body's momentum is equal to the net force exerted on it, according to Newton's second law of motion. Regardless of the frame of reference, momentum is a conserved quantity in any inertial frame, which means that if an enclosed system is not subject to outside influences, its total linear momentum remains constant.

The formula for calculating momentum is expressed as

momentum = mass x velocity

According to the law of conservation of momentum, initial momentum = final momentum

The formula for initial momentum is

m1u1 + m2u2

where

m1 = mass of first car

u1 = initial velocity of first car

m2 = mass of second car

u2 = initial velocity of second car

From the information given,

m1 = 900

u1 = 0 because it is at rest

m2 =  1700

u2 = 15.0 m/s

Initial momentum = 900 x 0 +  1700 x 15.0 = 25500

Momentum after the collision is 25500 kg⋅m/s

To learn more about Momentum refer :

https://brainly.com/question/1042017

#SPJ1

. the position of a particle moving along the x-axis is given by m. (a) at what time does the particle cross the origin? (b) what is the displacement of the particle between and 28. a cyclist rides 8.0 km east for 20

Answers

The time when the particle crosses the origin is t = 0.

What is time?
Time
is the ongoing progression of existence and things that happen in what seems to be an irreversible order from the past, present, and forward into the future. It is a quantity that is a part of many measurements that are used to compare the length of events or the gaps between them, to compare how long they last, to order events, and to measure how quickly things change in the real world or in our conscious experience. Along with the three spatial dimensions, time is frequently referred as a fourth dimension. Time has long been a crucial topic of study in philosophy, religion, and science, but scholars have never been able to define it in a way that is applicable to all of these disciplines without being circular.

(a) The particle crosses the origin when the position m is equal to 0. Since the position of the particle is given by m, we have to solve the equation m = 0. Therefore, the time when the particle crosses the origin is t = 0.

(b) The displacement of the particle between 0 and 28 is 28 - 0 = 28 km. The displacement of the cyclist between 0 and 20 is 8 km. Therefore, the displacement of the cyclist over the 20 minutes is 8/20 km/min. Since there are 28 minutes in total, the total displacement of the cyclist is 28 x (8/20) = 14 km.

To learn more about time
https://brainly.com/question/26449711
#SPJ4

a figure skater is rotating with her arms stretched out away from her body. as she pulls her arms in towards her body, what happens to her angular velocity?

Answers

A skater is rotating with her arms stretched out away from her body. As she pulls her arms in towards her body, her angular velocity increases.

If she pulls her arms in towards her body, moment of inertia reduces. And her angular momentum is conserved.

According to the law of conservation of angular momentum, we can say that, in the absence of external torque, the angular momentum of a system of particles does not change.

So, as she reduces her moment of inertia, her angular velocity increases. This results in the increase of her spinning speed.

To know more about angular velocity:

https://brainly.com/question/15876424

#SPJ4

one of jupiter's most recognizable features are the colorful bands that cover its surface. why is the surface of saturn so bland in comparison?

Answers

The surface of Saturn is much colder than the surface of Jupiter.

What is Jupiter?
The largest planet in the Solar System, Jupiter, is the fifth from the Sun. It is a gas giant with such a mass that is slightly less than one thousandth that of the Sun but more than two and half times so on of all of the other planets within the Solar System put together. After the Moon and Venus, Jupiter is indeed the third brilliant natural unit in the Earth's night sky, and people have been observing it since ancient times. It was given the name Jupiter just after Roman god and supreme deity.

This makes it difficult for convection currents to form in the atmosphere of Saturn and for clouds of ammonia and water to form. Without these clouds, the bands of color that are so prominent on Jupiter's surface are not seen on Saturn. Furthermore, the gases on Saturn's surface are much less dense than those on Jupiter's surface, which further prevents clouds from forming and obscuring the underlying surface features.

To learn more about Jupiter
https://brainly.com/question/28446338
#SPJ4

what is the tension in the rope, and what is the magnitude of the force that the floor exerts on the plank?

Answers

The tension in the rope is 366 N, and the floor's strain on the plank is 221 N, based on the answer to the question.

What does tension look like?

Compression force's opposite is tension. All of the things in the scene that are in contact with one another apply forces to one another. The finest demonstration of a tension force is when a rope is being pulled. The rope builds up a lot of tension when ever a pull force is applied to it.

Briefing:

a). Taking into account the plank's torque at the floor:

(T sin 60 )(L ) = (20g cos 30)(L/2) + (50g cos 30)(3L/4)

T = ( 10g cos 30 + (150 g cos 30) / 4) / sin 60

= 466 N

b). R + T = (20 + 50 )g

R = 70g − T

= 686 − 466

= 221 N

To know more about Tension visit:

https://brainly.com/question/24994188

#SPJ4

The complete question is-

A 20.0-kg uniform plank (10.0 m long) is supported by the floor at one end and by vertical rope at the other end shown in the figure A 50.0-kg mass person stands on the plank distance three-fourths of the length plank from the end on the floor.

(a) What is the tension in the rope?

(b) What is the magnitude of the force that the floor exerts on the plank?

at a building site, a 1000 kg container hangs from a crane cable and is then placed on the floor so that the cable is unloaded. the container is pushed to an elevator shaft, where it is to be lowered by the crane. by mistake, there is a 1-m slack in the cable from the crane when the container is pushed into the elevator shaft. calculate the maximum stress in the cable if the cable has a cross-sectional area of 500 mm2 , an effective elastic modulus of 70 gpa, and is 25-m long from the crane to the container.

Answers

Calculate the maximum stress in the cable if the cable has a cross-sectional area of 500 mm2 , an effective elastic modulus of 70 gpa, and is 25-m long from the crane to the container.   3 mm

The maximum stress in the cable is

Max

= 351.6696 N/mm

2

Elastic modwus , E = 70 GPa = 70x103 MPa ·

Cable length (l): 25 m : 25x10 cross-sectional area of cable

Cross-sectional area-

The go-sectional area is the area of a two-dimensional shape this is received while a 3-dimensional item - along with a cylinder - is sliced perpendicular to a few distinctive axis at a point.

As an example, the go segment of a cylinder - whilst sliced parallel to its base - is a circle. for that reason, the go-sectional area of this slice is the vicinity of a circle with the radius same to the radius of the provided cylinder.

Learn more about Circle here:-https://brainly.com/question/28969202

#SPJ4

a pipe of length 6.0 m is closed at one end and sustains a standing wave at its second overtone. determine the distance between a node and an adjacent antinode.

Answers

The distance between a node and an adjacent antinode is 1.2m.

If λ is the wavelength then the length of the pipe L = 5λ/4

Now F₁ = ν/4L

        F₃ = 5F₁ for second overtone for system of two different ends,

so, wavelength λ = [tex]\frac{4L}{5}[/tex] = 4 × [tex]\frac{6}{5}[/tex] = 4.8m

the distance between a node and adjacent antinode = λ/4 = [tex]\frac{4.8}{4}[/tex] = 1.2m

In physics, what do node and antinode mean?

The location of a point on a standing wave is described by its node and antinodes. The points known as nodes are those that do not deviate from the equilibrium position. At nodes, amplitude is at its lowest. Antinodes are locations where deviations from the mean position are at their highest (at crests and toughs). Antinodes have the highest amplitude.

On the other side, antinodes are created in regions where constructive interference takes place. For instance, a point of significant positive displacement happens when the crests of two waves collide.

To know more about node and antinode visit:

https://brainly.com/question/6999573

#SPJ4

Bobby and Michael are competing by running up bleachers. Both runners weigh the same. Bobby runs up the
bleachers in 30s and Micheal run up the same bleachers in 40s. Who is more powerful?
A Bobby and Michael are both equally powerful.
B Michael because he took longer to run up the stairs.
C Bobby because he runs up the stairs faster.
D Bobby because he does more work.

Answers

Bobby is more powerful because he runs up the stairs faster.

What is power?

Power is known to be the speed at which work is done. P = gravimetric power The SI unit is Watt W, where 1 Watt equals 1 Joule/second (1W=1J/s). Since work is energy transfer, power is also the rate at which energy is consumed. For example, a 60 W light bulb consumes 60 J of energy per second.

W = F × s

Where, W = work done

F = Force

s = distance

Since both of them are of same weight and can exert equal force while running and are covering same distance, their work done will be equal.

Now according to, P = W/T

Where, P = Power

W = Work

T = Time

Hence, power is inversely proportional to time.

Lesser the time for a particular work higher will be the power.

Time taken by Bobby to reach the bleachers = 30s

Time taken by Michael to reach the bleachers = 40s

As Bobby took lesser time to reach the bleachers, implies his high rate of work.

To know more about power, visit:

https://brainly.com/question/13787582

#SPJ1

question 5 what is this minimum value of the angular separation between objects that allows resolution?

Answers

The Minimum Angular Separation Between Two Stars is 4 × 10−6 Rad, If Telescope is Used to Observe Them with an Objective of Aperture 16 Cm.

The angular resolution measure is the angular size of the smallest features that the telescope can see. θ ≈ a / d . A complete circle is 2π radians = 360 degrees. Angular sizes or separations may also be measured in arcminutes (60 arcmin = 1 degree) or arcseconds (60 arcsec = 1 arcmin).

To find Angular Separation

It represents cosine angle between two vectors. ...

Formula. ...

Exercise: ...

From vector algebra we remember that cosine angle between two vectors can be represented as dot product divided by length of the two vectors.

The length of a vector (sometimes called modulus) is the root of square of its coordinate.

find more:-https://brainly.com/app/ask?q=Angular+Separation+It+represents+cosine+angle+between+two+vectors.+...+Formula.+...+Exercise%3A+...+From+vector+algebra+we+remember+that+cosine+angle+between+two+vectors+can+be+represented+as+dot+product+divided+by+length+of+the+two+vectors.+The+length+of+a+vector+%28sometimes+called+modulus%29+is+the+root+of+square+of+its+coordinate.

#SPJ4

A small rock bounces off the windshield of a moving car and experiences a large change in velocity. How does the car's momentum
change?

Answers

The car will slow down. If the rock is big enough and moving fast enough, the kinetic energy from the rock will transfer to the car. And because of that, the car will slow down (and the windshield will most likely shatter)

how do the friction force and applied force compare before and after the object is in motion? are these forces balanced or unbalanced? predict the net force.

Answers

Answer: In order for an object to move at a constant speed or to accelerate or decelerate, the applied (horizontal) force and the frictional force must be unequal.

Explanation: How does the frictional force compare to the applied force?

Frictional force serves to keep the crate in place by acting in the opposite direction as the applied force. The term for this rubbing force is static friction. If you push harder, the frictional force will rise until it achieves its maximum value as a result of the increased applied force.

Do we have even or uneven friction?

Friction was the driving force that kept the bucket in place. It absorbed the tiny force applied to the bucket and offset it. a move

To know more about Friction visit;

https://brainly.com/question/28356847?

#SPJ4

a rifle bullet has a muzzle velocity of 680 ft/s. (a) at what angle (ignoring air resistance) should the rifle be pointed to give the maximum range? (b) evaluate the maximum range.

Answers

(a) The angle the rifle should  be pointed to give the maximum range is 45⁰.

(b) The maximum range of the bullet is 47,183.7 m.

What is the maximum range of the raffle?

The maximum range of the raffle is calculated by applying the following kinematic equation.

R = u² sin(2θ) / g

where;

u is the velocity of the bulletθ is the angle of projection of the bulletg is the acceleration due to gravity

At the maximum range, the angle of projection = 45⁰

The maximum range of the bullet is calculated as follows;

R = u² sin(2θ) / g

R = (680² x sin(2 x 45) ) / 9.8

R = 47,183.7 m

Learn more about maximum range here: https://brainly.com/question/12870645

#SPJ1

A. The angle at which the rifle should be pointed to give the maximum range is 45 degrees.

B. The maximum range of the bullet is 4383.5 m

A. How do I determine the angle for maximum range?

projectile motion involves motion which follows a parabolic path.

However, to obtain a maximum range for projectile motion, the angle of projection must be 45 degrees

B. How do I determine the maximum range?

The maximum range of the bullet can be obtained as follow:

Initial velocity (u) = 680 ft/s = 680 × 0.3048 = 207.264 m/sAngle of projection for maximum range (θ) = 45 ° Acceleration due to gravity (g) = 9.8 m/s²Maximum range (R) =?

R = u²Sine(2θ) / g

R = [207.264² × Sine (2×45)] / 9.8

R = 4383.5 m

Thus, the maximum range is 4383.5 m

Learn more about maximum range:

https://brainly.com/question/20213110

#SPJ1

A car traveled 348 km in 5.0 min. What was the speed of the car in m/s?

Answers

Answer:

69,000m/s.

Explanation:

1. Divide

348 ÷ 5.0 = 69.6km

Now, it says to find it in meters. Not km. 1,000 meters = 1 km. So, we can simply move the decimal place over according to how many zeros there are in 1,000. In this case, there are 3 zeros. So, we can move the decimal place over 3 times:

69.6

696.

6,960.

69,600

May I have Brainliest please? My next rank will be the highest one: A GENIUS! Please help me on this journey to become top of the ranks! I only need 3 more brainliest to become a genius! I would really appreciate it, and it would make my day! Thank you so much, and have a wonderful rest of your day!

a 7 kg mass is 12 meters from a 9 kg mass. what is the magnitude of the gravitational force on the 7 kg mass due to the 9 kg mass?

Answers

The gravitational force is 2-92 X 10⁻¹¹ N

Solution:

F = [tex]\frac{ Gm_{1} m_{2} }{r^{2} } = \frac{6.67*10^{-11} (7)(a)}{12^{2} }[/tex]

= 2-92 X 10⁻¹¹ N

Gravity or attraction pulls objects with mass together. We often think about Earth's gravity. This force locks the body to the ground. However, all objects with mass exert gravitational force on all other objects with mass.

Gravity is described as the force of attraction that attracts all physical forms with mass. It is by far the weakest known force of nature. The reason gravity pulls you to the ground is that all objects with mass like our Earth actually bend or distort the fabric of the universe called space-time. This curvature is what we perceive as gravity.

Learn more about The gravitational force here:- https://brainly.com/question/24783651

#SPJ4

a 1.0-kg ball is thrown into the air with an initial velocity of 30. m/s. a. how much kinetic energy does the ball have? b. how much potential energy does the ball have when it reaches the top of its ascent? c. how high into the air did the ball travel?

Answers

a) Kinetic energy of ball is 450J.

A 1kg ball is thrown into the air with an initial velocity of 30m/s. Newtonian physics says the kinetic energy that the ball have is:

( [tex]\frac{1}{2} )[/tex] ×1 kg×[tex](30 \frac{m}{s}) ^{2}[/tex]= 450 J.

In physics, what is kinetic energy?

The energy a thing has as a result of motion is known as kinetic energy. A force must be applied to a thing in order to accelerate it. We must put forth effort in order to apply a force. After the job is finished, energy is transferred to the thing, which then moves at a new, constant speed.

b) Potential energy of ball is 450J

The whole amount of energy will be in the form of potential energy since the ball's kinetic energy will be equal to zero. As a result, when the ball reaches the peak of its climb, its potential energy will be 450 J.

c) 45m high into the air ball travel.

KE at start = GPE at the peak

450 = mgh

450 = (1)(g)(h)

450= (1)(10)(h)

45=h

Therefore, the ball will reach up to a height of 45m.

To know more about kinetic energy and potential energy visit:

https://brainly.com/question/20562795

#SPJ4

 

g when light strikes a window pane some rays will be reflected back and forth in between the two glass surfaces. why do these reflected rays not produce visible colored interference fringes?

Answers

The reflected rays of light don't produce visible colored interference fringes in a window pane because the glass structure of a window pane prevents the interference patterns to be observed.

A window pane is the glass that acts as a window in a building. While usually a window pane is only composed of a single piece of glass, sometimes two or more glass sheets are used with some space between each.

When it strikes a window pane, some rays will be reflected back and forth between the glass surfaces. Theoretically, it should produce some visible colored interference fringes. However, the glass structures in window panes do not have the ability to produce these visible fringes. They do produce the effect, but they are negated by the effect of other sections of the glass.

Learn more about interference fringes at https://brainly.com/question/14701887

#SPJ4

a 4.0 m length of metal wire is connected to a 1.5 v battery, and a current of 3.0 ma flows through it. what is the diameter of the wire? (the resistivity of metal is 2.24×10−8ω⋅m .)

Answers

The wire has a diameter of  1.596 × (10) -5 m.

How to calculate the Diameter?

L = 4.0 m is the length of the wire.

The battery's emf is 1.5 volts.

I = 4 mA = 0.004 A is the wire's current.

The wire's resistance can be calculated using;

R = V / I

R = 1.5 / 0.004

R = 375 ohms

The wire's resistance in terms of resistivity is determined by;

R = pL / A

A = pL / R

Where;

The wire's area A is

Gold has a resistivity of (2.44 x 10)-8 ohm.

A = (2.44 x 10)-8 × 4 /375

A = 2.603 × (10) -10 m²

A = πd² / A

πd²  = 4A

d = √4A / π

d = √4/ (2.602 × (10) -10 / π

d = 1.596 × (10) -5 m.

To Learn more About  Diameter refer to:

https://brainly.com/question/23220731

#SPJ4

What is the difference between speed and velocity?

Speed and velocity both involve distance traveled over time, but velocity also includes direction


Speed is how fast you're going, velocity is how fast you move


Speed is calculated by dividing the distance you travel by the time it took, whereas velocity you can just tell by looking at it


Velocity is more scientific

Answers

Answer: Speed and velocity both involve distance traveled over time, but velocity also includes direction

Explanation: speed is the time rate at which the object travels & velocity is the time rate at which the object travels also but includes direction too.  

c. we may think of a bulb as presenting an obstacle, or resistance, to the current in the circuit. 1. thinking of the bulb in this way, would adding more bulbs in series cause the total obstacle to the flow, or total resistance, to increase, decrease, or stay the same as before. 2. formulate a rule for predicting how the current through the battery would change (i.e., whether it would increase, decrease, or remain the same) if the number of bulbs connected in series were increased or decreased.

Answers

All light bulbs contain a filament that has some form of resistance hence adding more bulbs in series will increase the total obstacle to the flow, or increases the total resistance

Resistance is the degree to which a substance obstructs or opposes an electric current and electron flow is referred to as electric current.

As electricity passes through the filament, it encounters the resistance due to presence of filament and the energy is converted into light and heat.

According to the Ohm's law, V = IR

if the voltage remains constant then the current(I) is inversely proportional to the resistance(R).

So increasing the number of bulbs connected in series would decrease the current through the battery as it is having constant voltage.

To know more about resistance,

https://brainly.com/question/29671236

#SPJ4

Other Questions
Determine which integer in the solution set will make the equation true. 4p + 12 = 16 S: {1, 1, 3, 4} 1 1 3 4 FD140120C?BThank you is only capable of pushing a car with a force of 800 n. how fast must the car be moving at the bottom of the hill so that his 800 n force will be just enough to get it to the top of the hill an import can only occur inside the borders of your home country and an export can only occur outside the borders of your home country an import can only occur inside the borders of your home country and an export can only occur outside the borders of your home country true false annas father tried a low-carb diet for a while but stopped when he became aware of a new diet called ""paleo."" this is an example of 16 - 5a +2a - 1 = 41 - a advanced technology and performance capabilities, consistent quality, availability in multiple colors and sizes, prompt delivery, technical support services, customer financing, distribution channels, or some other feature of importance to customers are examples of: you have installed anti-virus software on the computers on your network. you update the definition and engine files and configure the software to update those files every day. what else should you do to protect your systems from malware? (select two.) Write the special method __str__() for CarRecord.Sample output with input: 2009 'ABC321'Year: 2009, VIN: ABC321The following code is what I have came up with, but I'm receiving an error:TYPEERROR: __str__ returned non-stringI can't figure out where I went wrong. __________ are widely used tools of financial analysis because they provide clues and symptoms of underlying conditions. They can help us uncover conditions and trends difficult to detect by inspecting individual components of the statements. Discuss the differences between the 3 schools of thought of artistic representation of Buddha. all other varaibles held constant, investmemts paying siple interes havt to pay significance hiher interest rate to erab the sane anount of interest as an account compiund interestTrue or False an infant is brought to the emergency department with poor skin turgor, weight loss, lethargy, and tachycardia. this is suggestive of: group of answer choices dehydration calcium excess overhydration sodium excess what is the most important reason for starting intravenous infusions in the upper extremities rather than the lower extremities of adults? determine the area under the standard normal curve that lies to the right of the z-score 0.11 and to the left of the z-score 0.41. How do parents have kids Select all the inequalities that can be solved using only the Addition Property of Inequality. A. w 4 > 10 B. 12 20x C. 7y/10 5.5 D. 3.25 < x 9.75 E. z 1/2 9.8 the nurse is monitoring a patient who sustained an open fracture of the left hip. what type of shock should the nurse be aware can occur with this type of injury? what is the term for an observable phenomenon in nature that is widely supported with empirical evidence; it tells us something happens, but not the why or how? massachusetts state supreme court decision in 1842 which declared that there was nothing inherently illegal in workers organizing a union or a strike