Calculate the time it takes for the Terminator pieces to reach their melting point. Hint: the general solution of the differential equation [+ y is 7(t) = cze-t/t + yt, where cz is a constant of integration.

The angle for the third order maximum is 31.1 degrees.

The formula for calculating the angle for the nth order maximum is given by: sinθ = nλ/d, where θ is the angle, λ is the wavelength of light, d is the distance between the slits (also known as the grating spacing), and n is the order of the maximum.
In this case, the grating has 8000 slits spaced over 2.54 cm, which means the grating spacing d = 2.54 cm / 8000 = 3.175 x 10^-4 cm. The wavelength of light is given as 546 nm, which is 5.46 x 10^-5 cm.
To find the angle for the third order maximum, we can plug in these values into the formula: sinθ = 3 x 5.46 x 10^-5 cm / 3.175 x 10^-4 cm. Solving for θ gives us sinθ = 0.524, or θ = 31.1 degrees (rounded to the nearest tenth of a degree). Therefore, the correct answer is 31.1 degrees.
This calculation involves the use of the formula that relates the angle, wavelength, and grating spacing, which allows us to determine the maximum angles at which constructive interference occurs.

To know more about angle visit:

https://brainly.com/question/31814721

#SPJ11

The volume the gas will occupy at 40°C and 1.20 atm is approximately 23.6 L.

To determine the volume the gas will occupy, we can use the combined gas law equation:

(P₁V₁)/T₁ = (P₂V₂)/T₂

Where:
P₁ = 0.956 atm (initial pressure)
V₁ = 19.1 L (initial volume)
T₁ = 23°C + 273.15 = 296.15 K (initial temperature in Kelvin)
P₂ = 1.20 atm (final pressure)
V₂ = ? (final volume that we want to find)
T₂ = 40°C + 273.15 = 313.15 K (final temperature in Kelvin)

Now we can plug in these values and solve for V₂:

(0.956 atm x 19.1 L) / 296.15 K = (1.20 atm x V₂) / 313.15 K

Simplifying:

V₂ = (0.956 atm x 19.1 L x 313.15 K) / (1.20 atm x 296.15 K)

V₂ = 23.6 L (rounded to 3 significant figures)

Therefore, the volume of helium gas at 40°C and 1.20 atm will be approximately 23.6 L.

Learn more about combined gas law here: https://brainly.com/question/29341891

#SPJ11

(a) The built-in potential [tex]V_{bi[/tex] = 0.73 V

(b) Depletion width [tex](W_{dep})[/tex] = 0.24 μm

(c) [tex]X_n[/tex] = 0.20 μm, [tex]X_p[/tex] = 0.04 μm

(d) The maximum electric field [tex]E_{max[/tex] = 3.04 MV/cm.

a) Built-in potential (Vbi):

[tex]V_{bi[/tex] = (k × T / q) × V ln([tex]N_d[/tex] × [tex]N_a[/tex] / ni^2)

where:

k = Boltzmann constant (8.617333262145 × [tex]10^{-5}[/tex] eV/K)

T = temperature in Kelvin (300 K)

q = elementary charge (1.602176634 × [tex]10^{-19}[/tex] C)

[tex]N_d[/tex] = donor concentration (5 x [tex]10^{16} cm^{-3}[/tex])

[tex]N_a[/tex] = acceptor concentration (5 x [tex]10^{15} cm^{-3[/tex])

[tex]n_i[/tex] = intrinsic carrier concentration of silicon at 300 K (1.5 x 10^10 cm^-3)

Substituting the given values:

[tex]V_{bi[/tex] = (8.617333262145 × [tex]10^{-5}[/tex] × 300 / 1.602176634 × [tex]10^{-19}[/tex]) × ln(5 x [tex]10^{16[/tex] × 5 x [tex]10^{15[/tex] / (1.5 x [tex]10^{10})^{2[/tex])

(b) Depletion width (Wdep):

[tex]W_{dep[/tex] = √((2 × ∈ × [tex]V_{bi[/tex]) / (q × (1 / [tex]N_d[/tex] + 1 / [tex]N_a[/tex])))

where:

∈ = relative permittivity of silicon (11.7)

Substituting the given values:

[tex]W_{dep[/tex] = √((2 × 11.7 × Vbi) / (1.602176634 × [tex]10^{-19[/tex] × (1 / 5 x [tex]10^{16[/tex] + 1 / 5 x [tex]10^{15[/tex])))

(c) [tex]X_n[/tex] and [tex]X_p[/tex]:

[tex]X_n[/tex] = [tex]W_{dep[/tex] × [tex]N_d / (N_d + N_a)[/tex]

[tex]X_p[/tex] = [tex]W_{dep[/tex] × [tex]N_a / (N_d + N_a)[/tex]

(d) The maximum electric field (Emax):

[tex]E_{max} = V_{bi} / W_{dep[/tex]

To learn more about electric follow the link:

https://brainly.com/question/11482745

#SPJ4

The uncertainty in momentum of a particle inside the nucleus is at least h/4π times the reciprocal of the radius of the nucleus.

According to Heisenberg's uncertainty principle, the product of the uncertainty in position (Δx) and the uncertainty in momentum (Δp) of a particle cannot be smaller than a certain value, which is equal to Planck's constant divided by 2π (ℏ=h/2π). This principle applies to all particles, including those inside a nucleus.

Given that the uncertainty in position (Δx) of a particle inside the nucleus is equal to the diameter of the nucleus, we can write:

Δx = 2r

where r is the radius of the nucleus.

Using the uncertainty principle, we have:

ΔxΔp≥ℏ2

Substituting Δx with 2r, we get:

2rΔp≥ℏ2

Solving for Δp, we obtain:

Δp≥ℏ2(2r)

Substituting ℏ=h/2π, we get:

Δp≥h/4πr

For more such questions on nucleus:

https://brainly.com/question/17704494

#SPJ11

The uncertainty in momentum of a particle inside the nucleus is at least h/4π times the reciprocal of the radius of the nucleus.

According to Heisenberg's uncertainty principle, the product of the uncertainty in position (Δx) and the uncertainty in momentum (Δp) of a particle cannot be smaller than a certain value, which is equal to Planck's constant divided by 2π (ℏ=h/2π). This principle applies to all particles, including those inside a nucleus.

Given that the uncertainty in position (Δx) of a particle inside the nucleus is equal to the diameter of the nucleus, we can write:

Δx = 2r

where r is the radius of the nucleus.

Using the uncertainty principle, we have:

ΔxΔp≥ℏ2

Substituting Δx with 2r, we get:

2rΔp≥ℏ2

Solving for Δp, we obtain:

Δp≥ℏ2(2r)

Substituting ℏ=h/2π, we get:

Δp≥h/4πr

Visit to know more about Nucleus:-

brainly.com/question/17704494

#SPJ11

The wavelength of the 1.0-MeV gamma-ray photon is much smaller than the wavelength of the neutron having the same kinetic energy at 1.99 x 10⁻¹⁹ m and 1.79 x 10⁻¹⁵ m respectively.

The de Broglie wavelength λ of a particle can be given by the expression:

λ = h/p

where h = Planck's constant and p = momentum of the particle.

For a photon, the momentum can be given by:

p = E/c

where E = energy of the photon and c = speed of light.

For a gamma-ray photon with energy E = 1.0 MeV = 1.0 x 10^6 eV:

p = E/c = (1.0 x 10⁶ eV) / (3.0 x 10⁸ m/s) = 3.33 x 10⁻¹⁵ kg m/s

Substituting this momentum value in the expression for λ:

λ = h/p = (6.63 x 10⁻³⁴ J s) / (3.33 x 10⁻¹⁵ kg m/s) = 1.99 x 10⁻¹⁹ m

For a neutron, the momentum can be given by:

p = √(2mK)

where m = mass of the neutron, K = kinetic energy, and c = speed of light.

Substituting the given values:

p = √(2 x 939 MeV x (1.0 MeV / 938.3 MeV)) / c

p = 3.70 x 10⁻¹⁹ kg m/s

Substituting this momentum value in the expression for λ:

λ = h/p = (6.63 x 10⁻³⁴ J s) / (3.70 x 10⁻¹⁹ kg m/s) = 1.79 x 10⁻¹⁵ m

Therefore, the wavelength of the 1.0-MeV gamma-ray photon is much smaller than the wavelength of the neutron having the same kinetic energy. The gamma-ray photon has a wavelength of approximately 1.99 x 10⁻¹⁹ m, while the neutron has a wavelength of approximately 1.79 x 10⁻¹⁵ m.

Find out more on wavelength here: https://brainly.com/question/10728818

#SPJ1

The angular acceleration of a rotating object would depend on several factors such as the object's mass, shape, and the applied force.

Acceleration can be calculated using the formula: α = τ / I, where α is the angular acceleration, τ is the torque applied to the object, and I is the moment of inertia of the object. Therefore, the expected angular acceleration would vary based on the specific parameters of the rotating object.

Angular acceleration, denoted by the Greek letter alpha (α), is the rate of change of angular velocity (ω) of a rotating object. The angular acceleration depends on the net torque (τ) applied to the object and its moment of inertia (I).

The formula to calculate angular acceleration is:

α = τ / I

To find the expected angular acceleration of a rotating object, you would need to know the net torque acting on the object and its moment of inertia. Once you have these values, you can plug them into the formula and calculate the angular acceleration.

Learn more about angular acceleration here,

https://brainly.com/question/13014974

#SPJ11

(a) The possible range in the ages of the universe, assuming a constant Hubble constant, is approximately 12.7 to 14.7 billion years.

The Hubble constant represents the rate of expansion of the universe. Assuming it has been constant since the Big Bang, we can use the Hubble constant to estimate the age of the universe through the inverse of Hubble's law: age = 1/H₀, where H₀ is the Hubble constant. Taking the lower and upper bounds of the current estimates (19.9 km/s/Mpc and 23 km/s/Mpc), we convert them to km/s per million light-years (Mpc = 3.26 million light-years). Thus, the age range is approximately 1/(23 × 3.26) to 1/(19.9 × 3.26) billion years, resulting in an age range of around 12.7 to 14.7 billion years.

(b) Considering the estimates from twenty years ago, ranging from 50 to 100 km/s/Mpc, the possible ages of the universe would be approximately 6.5 to 13 billion years.

Similarly to part (a), we can use the inverse of the Hubble constant to estimate the age of the universe. Taking the lower and upper bounds from twenty years ago (50 km/s/Mpc and 100 km/s/Mpc) and converting them to km/s per million light-years, we get a range of 1/(100 × 3.26) to 1/(50 × 3.26) billion years. This yields an age range of approximately 6.5 to 13 billion years.

Considering other lines of evidence, such as measurements of the cosmic microwave background radiation and the abundance of light elements, the age of the universe is estimated to be around 13.8 billion years. This value falls within the range of both the current and the previous estimates of the Hubble constant. Therefore, the evidence supports the age of the universe being around 13.8 billion years, providing some constraints on the possibilities given by different estimates of the Hubble constant.

Learn more about estimates here:

https://brainly.com/question/30876115

#SPJ11

The index of refraction for the unknown material is approximately 1.931.

To find the index of refraction for the unknown material, you can use Snell's Law, which states:

n₁ * sin(θ₁) = n₂ * sin(θ₂)

In this case, n₁ is the index of refraction for air, which is approximately 1.00. θ₁ is the angle of incidence (36°), n₂ is the index of refraction for the unknown material, and θ₂ is the angle of refraction (18°).

Following the formula, you can plug in the values:

1.00 * sin(36°) = n₂ * sin(18°)

Now, divide both sides by sin(18°) to solve for n₂:

n₂ = (1.00 * sin(36°)) / sin(18°)

Calculate the values:

n₂ ≈ 1.931

To know more about refraction referhttps://brainly.com/question/14760207

#SPJ11

The total current through a non-uniform current density cylinder was calculated by integration. The magnetic field at a distance of 2 cm from the cylinder's axis was found using Ampere's law.

To calculate the total current through the cylinder, we need to integrate the current density over the volume of the shaded region. Since the current density is non-uniform, we need to use a double integral in cylindrical coordinates.

The volume element in cylindrical coordinates is given by da = r dr dθ, so we have:

The limits of integration for r and θ are determined by the dimensions of the shaded region. The inner and outer radii are a = 25.0 mm and b = 60.0 mm, respectively, and the shaded region extends over the entire circumference of the cylinder, so we have:

∫∫[tex]r^2[/tex] da = ∫[tex]0^2[/tex]π ∫[tex]a^b[/tex] [tex]r^2[/tex] r dr dθ

= ∫[tex]0^2[/tex]π ∫[tex]25.0mm^2[/tex] [tex]60.0mm^2[/tex] [tex]r^3[/tex] dr dθ

= π([tex]60.0^4[/tex] - [tex]25.0^4[/tex])/4 × J0

Plugging in the given value of J0 = [tex]5 mA/cm^4[/tex] and converting the radii to meters, we get:

I = π([tex]60.0^4[/tex] - [tex]25.0^4[/tex])/4 × J0

= π([tex]0.06^4[/tex] - [tex]0.025^4[/tex])/4 × 5 × [tex]10^3[/tex] A

≈ 1.17 A

Therefore, the total current through the cylinder is approximately 1.17 A.

To calculate the magnitude of the magnetic field at a distance of d = 2 cm from the axis of the cylinder, we can use Ampere's law. Since the current flows parallel to the axis of the cylinder, the magnetic field will also be parallel to the axis and will have the same magnitude at every point on a circular path of radius d centered on the axis.

Choosing a circular path of radius d and using Ampere's law, we have:

∮B · dl = μ0 Ienc

where

The path integral on the left-hand side can be evaluated as follows:

∮B · dl = B ∮dl

= B × 2πd

Since the current flows only through the shaded region of the cylinder, the current enclosed by the circular path of radius d is equal to the total current through the shaded region. Therefore, we have:

Ienc = I = π([tex]60.0^4[/tex] - [tex]25.0^4[/tex])/4 × J0

= π([tex]0.06^4[/tex] - [tex]0.025^4[/tex])/4 × 5 × [tex]10^3[/tex] A

≈ 1.17 A

Substituting these values into Ampere's law and solving for B, we get:

B × 2πd = μ0 Ienc

B = μ0 Ienc / (2πd)

Plugging in the values and converting the radius to meters, we get:

B = μ0 Ienc / (2πd)

= (4π × [tex]10^{-7}[/tex] T·m/A) × 1.17 A / (2π × 0.02 m)

≈ 9.35 × [tex]10^{-5}[/tex] T

Therefore, the magnitude of the magnetic field at a distance of 2 cm from the axis of the cylinder is approximately 9.35 ×

Learn more about total current through: brainly.com/question/20024264

#SPJ11

The mass of hydrogen required by the fuel cell to run the gadget for 30 min is 2.78 grams.10 stacked cells are needed to generate 6.00 kW of power at the average voltage of the fuel cell of 0.60 V and current of 100 A.

Problem 1:

The mass of hydrogen required by a fuel cell can be calculated using the following formula:

mass = (I * t * n * M) / (2 * F)

Given:

I = 250 A (current)

t = 30 min = 1800 s (time)

n = 2 (number of electrons transferred per mole of hydrogen)

M = 2.01 g/mol (molar mass of hydrogen)

F = 96500 C/mol (Faraday constant)

Substituting these values into the formula, we get:

mass = (250 A * 1800 s * 2 * 2.01 g/mol) / (2 * 96500 C/mol)

mass = 2.78 g

Therefore, the mass of hydrogen required by the fuel cell to run the gadget for 30 min is 2.78 grams.

Problem 2:

The power generated by a fuel cell can be calculated using the following formula:

P = V * I

where P is the power (in watts), V is the voltage (in volts), and I is the current (in amperes).

Given:

P = 6.00 kW (power)

V = 0.60 V (voltage)

I = 100 A (current)

Substituting these values into the formula, we get:

P = V * I

6000 W = 0.60 V * 100 A

Solving for V, we get:

V = P / I

V = 6000 W / 100 A

V = 60 V

Therefore, the average voltage of the fuel cell is 60 V.

The number of stacked cells needed can be calculated using the following formula:

n = P / (V * I)

where n is the number of stacked cells, P is the power (in watts), V is the average voltage of the fuel cell (in volts), and I is the current (in amperes).

Substituting the given values, we get:

n = 6.00 kW / (60 V * 100 A)

n = 10

Therefore, 10 stacked cells are needed to generate 6.00 kW of power at the average voltage of the fuel cell of 0.60 V and current of 100 A.

Learn more about voltage here:

https://brainly.com/question/29445057

#SPJ11

The numerical value of the probability given by equation T4.8 is unchanged if we add a constant value E to the energy of each energy state available to the small system.

We can start by rewriting the equation as:

[tex]Pr'(E) = Z^{-1} * e^{(-(E + E')/kT)[/tex]

where Pr'(E) is the probability of the small system being in a state with energy E + E', Z is the partition function, k is Boltzmann's constant, T is the absolute temperature, and E' is the constant value added to the energy of each energy state.

To show that Pr'(E) is equal to Pr(E), we can substitute E + E' with E in the original equation T4.8:

[tex]Pr(E) = Z^{-1}* e^{(-E/kT)[/tex]

Then, we can substitute E with E - E' in Pr'(E):

[tex]Pr'(E) = Z^{-1} * e^{(-(E - E' + E')/kT)Pr'(E) = Z^{-1} * e^{(-E/kT) * e^(-E'/kT)[/tex]

Since [tex]e^{(E'/kT)[/tex] is a constant factor that does not depend on E, we can write:

[tex]Pr'(E) = Pr(E) * e^{(E'/kT)[/tex]

This means that the numerical value of the probability given by equation T4.8 is unchanged if we add a constant value E' to the energy of each energy state available to the small system, as long as we multiply the resulting probability by [tex]e^{(E'/kT)[/tex].

In other words, adding a constant value to the energy of each energy state of the small system does not change the relative probabilities of the different states, but it does change their absolute energies.

The Boltzmann factor [tex]e^{(E/kT)[/tex] gives the relative probability of each state, while the partition function Z ensures that the probabilities add up to 1.

To know more about probability, refer here:

https://brainly.com/question/31469353#

#SPJ11

According to the statement the angular velocity of the disk when its mass center has moved 0.5 m along the plane is 3.42 rad/s.

To solve this problem, we need to use the principle of conservation of energy. Initially, the disk is at rest, so its kinetic energy is zero. As the couple moment of 80 Nm is applied to the disk, it starts to rotate. Since the disk rolls without slipping, its velocity can be expressed as a combination of rotational and translational velocity.
The energy stored in the spring is given by 0.5*k*x^2, where k is the spring constant and x is the displacement of the spring from its unstretched position. In this case, x is equal to the distance traveled by the mass center of the disk, which is 0.5 m.
At the end of the motion, the energy stored in the spring has been converted into kinetic energy of the disk. Therefore, we can equate the energy stored in the spring to the kinetic energy of the disk, and solve for the angular velocity.
0.5*k*x^2 = 0.5*I*ω^2 + 0.5*m*v^2
where I is the moment of inertia of the disk, ω is the angular velocity, and v is the translational velocity of the disk.
Since the disk rolls without slipping, v = R*ω, where R is the radius of the disk. Also, I = 0.5*m*R^2, so we can simplify the equation to:
0.5*k*x^2 = 0.5*m*R^2*ω^2 + 0.5*m*R^2*ω^2
Solving for ω, we get:
ω = sqrt((2*k*x^2)/(3*m*R^2))
Plugging in the values given in the problem, we get:
ω = sqrt((2*100*0.5^2)/(3*30*0.2^2)) = 3.42 rad/s
Therefore, the angular velocity of the disk when its mass center has moved 0.5 m along the plane is 3.42 rad/s.

To know more about velocity visit :

https://brainly.com/question/30546049

#SPJ11

At high altitudes like Mount Everest, the cold temperature causes a rightward shift in the oxygen-hemoglobin dissociation curve, resulting in decreased affinity of hemoglobin for oxygen and increased release of oxygen to the body tissues.

At the top of Mt. Everest, the temperature is significantly colder than at sea level. The colder temperature would cause a shift in the oxygen-hemoglobin dissociation curve to the right, which means that the affinity of hemoglobin for oxygen decreases.

This is because as the temperature decreases, the hemoglobin molecule undergoes a conformational change that results in a weaker binding of oxygen to the heme groups.

The shift to the right means that hemoglobin will release more oxygen for a given partial pressure of oxygen, which is beneficial at high altitudes where there is less atmospheric pressure and lower partial pressure of oxygen.

Therefore, the shift to the right helps to ensure that the oxygen delivery to the body tissues remains adequate, despite the reduced availability of oxygen in the atmosphere.

Learn more about oxygen-hemoglobin dissociation: brainly.com/question/30766002

#SPJ11

An LC circuit is a circuit that consists of an inductor (L) and a capacitor (C) connected in parallel or in series. In an LC circuit, the energy is transferred back and forth between the inductor  inductance of the LC circuit is approximately 2.64 × [tex]10^{-4} H.[/tex]

The frequency of oscillation is given by: f = 1 / (2π√(LC)) where f is the frequency in hertz (Hz), L is the inductance in henrys (H), and C is the capacitance in farads (F).

We are given the frequency f = 120 Hz and the capacitance C = 8.00 F. We can rearrange the above formula to solve for the inductance L:

[tex]L = (1 / (4π^2f^2C))\\L = (1 / (4π^2(120 Hz)^2(8.00 F)))\\L = 2.64 × 10^-4 H[/tex]

Therefore, the inductance of the LC circuit is approximately 2.64 × 10^-4 H.

Know more about capacitance here:

https://brainly.com/question/31871398

#SPJ11

A skier with a mass of 64.0 kg starts from rest at the top of a ski slope of height 62.0 m. With frictional forces doing work of -1.10×10⁴ J, the skier reaches a velocity of 12.4 m/s at the bottom of the slope.

We can use the conservation of energy principle to solve this problem. At the top of the slope, the skier has potential energy equal to her mass times the height of the slope times the acceleration due to gravity, i.e.,

U_i = mgh

where m is the skier's mass, h is the height of the slope, and g is the acceleration due to gravity. At the bottom of the slope, the skier has kinetic energy equal to one-half her mass times her velocity squared, i.e.,

K_f = (1/2)mv_f²

where v_f is the skier's velocity at the bottom of the slope.

If there were no frictional forces, then the skier's potential energy at the top of the slope would be converted entirely into kinetic energy at the bottom of the slope, so we could set U_i = K_f and solve for v_f. However, since there is frictional force acting on the skier, some of her potential energy will be converted into heat due to the work done by frictional forces, and we need to take this into account.

The work done by frictional forces is given as -1.10×10⁴ J, which means that the frictional force is acting in the opposite direction to the skier's motion. The work done by friction is given by

W_f = F_f d = -\Delta U

where F_f is the frictional force, d is the distance travelled by the skier, and \Delta U is the change in potential energy of the skier. Since the skier starts from rest, we have

d = h

and

\Delta U = mgh

Substituting the given values, we get

-1.10×10⁴ J = -mgh

Solving for h, we get

h = 11.2 m

This means that the skier's potential energy is reduced by 11.2 m during her descent due to the work done by frictional forces. Therefore, her potential energy at the bottom of the slope is

U_f = mgh = (64.0 kg)(62.0 m - 11.2 m)(9.80 m/s²) = 3.67×10⁴ J

Her kinetic energy at the bottom of the slope is therefore

K_f = U_i - U_f = mgh + W_f - mgh = -W_f = 1.10×10⁴ J

Substituting the given values, we get

(1/2)(64.0 kg)v_f² = 1.10×10⁴ J

Solving for v_f, we get

v_f = sqrt((2×1.10×10⁴ J) / 64.0 kg) = 12.4 m/s

Therefore, the skier's velocity at the bottom of the slope is 12.4 m/s.

To know more about the frictional forces refer here :

https://brainly.com/question/30280752#

#SPJ11

The height of the stand, h, can be determined by considering the relationship between the water level in the tank and the distance the stream of water lands from the base of the stand.

When the spout is opened, the water in the tank will flow out and form a stream. The distance the stream lands from the base of the stand is determined by the vertical distance traveled by the water from the tank to the ground.

Let's denote the height of the stand as h. Since the water level in the tank is initially at 0.4 m and the tank is 0.65 m tall, the vertical distance traveled by the water is 0.65 - 0.4 = 0.25 m. This distance is equal to the distance the stream lands from the base of the stand, which is given as 0.25 m.

Therefore, h = 0.25 m. The height of the stand is 0.25 meters.

Learn more about fluid dynamics here:

brainly.com/question/30578986

#SPJ11

The energy of activation associated with viscosity is approximately 2.372 kJ/mol.

To calculate the energy of activation associated with viscosity, we can use the Arrhenius equation:

η = η₀ * exp(Ea / (R * T))

Where:
η = viscosity
η₀ = pre-exponential factor (constant)
Ea = activation energy
R = gas constant (8.314 J/mol·K)
T = temperature in Kelvin

Given the viscosity of water at 20°C (1.002 cp) and 30°C (0.7975 cp), we can set up two equations:

1.002 = η₀ * exp(Ea / (R * (20+273.15)))
0.7975 = η₀ * exp(Ea / (R * (30+273.15)))

To find Ea, first, divide the two equations:

(1.002/0.7975) = exp(Ea * (1/(R * 293.15) - 1/(R * 303.15)))

Now, solve for Ea:

Ea = R * (1/293.15 - 1/303.15) * ln(1.002/0.7975)

Ea ≈ 2.372 kJ/mol

So, the energy of activation is approximately 2.372 kJ/mol.

Learn more about Arrhenius equation here: https://brainly.com/question/28038520

#SPJ11

a. Sphere c ends up with a charge of -3q.

b. The total charge on the three spheres before they are allowed to touch each other is 5q - q = 4q.

a. When spheres a and b are touched together and then separated, charge is transferred between them until they reach equilibrium. Since sphere a has a charge of 5q and sphere b has a charge of -q, the total charge transferred is 5q - (-q) = 6q. This charge is shared equally between the two spheres, so sphere a ends up with a charge of 5q - 3q = 2q, and sphere b ends up with a charge of -q + 3q = 2q.

When sphere c is touched to sphere a and separated, they share charge. Sphere a has a charge of 2q, and sphere c has no net charge initially. The charge is shared equally, so both spheres end up with a charge of q.

Similarly, when sphere c is touched to sphere b and separated, they also share charge. Sphere b has a charge of 2q, and sphere c has a charge of q. The charge is shared equally, so both spheres end up with a charge of (2q + q) / 2 = 3q/2.

Therefore, sphere c ends up with a charge of -3q (opposite sign due to excess electrons) and the total charge on the three spheres before they are allowed to touch each other is 5q - q = 4q.

learn more about spheres here:

https://brainly.com/question/22849345

#SPJ11

Approximately 0.703 grams of matter would need to be totally destroyed to run a 100W lightbulb for 2 years.

The amount of matter that would need to be totally destroyed to run a 100W lightbulb for 2 years can be calculated using Einstein's famous equation E = mc², where E is the energy produced by the lightbulb, m is the mass of matter that needs to be destroyed, and c is the speed of light.

To find the total energy used by the lightbulb over the two-year period, we can start by calculating the total number of seconds in 2 years, which is 2 x 365 x 24 x 60 x 60 = 63,072,000 seconds. Multiplying this by the power of the lightbulb (100W) gives us the total energy used over the two-year period: 100 x 63,072,000 = 6.31 x 10¹² J.

Next, we can use Einstein's equation to find the mass of matter that would need to be destroyed to produce this amount of energy. Rearranging the equation to solve for mass, we get:

m = E / c²

Plugging in the value for energy (6.31 x 10¹² J) and the speed of light (3.00 x 10⁸ m/s), we get:

m = (6.31 x 10¹² J) / (3.00 x 10⁸ m/s)² = 7.03 x 10⁻⁴ kg

Therefore, approximately 0.703 grams of matter would need to be totally destroyed to run a 100W lightbulb for 2 years.

To know more about Einstein's equation refer here:

https://brainly.com/question/30404143#

#SPJ11

Therefore, the period of motion for the block is 0.845 seconds.

In order to calculate the period of motion of the block, we first need to determine the spring constant (k) of the vertical spring.
Using Hooke's Law, we know that the force applied to the spring is proportional to the amount of stretch or compression. This can be expressed as:
F = -kx
where F is the force applied to the spring, x is the amount of stretch or compression, and k is the spring constant.
To find the spring constant, we can rearrange the equation:
k = -F/x
We know that the 6-g object stretches the spring by 4.3 cm, or 0.043 m. The weight of the object can be calculated as follows:
F = mg
F = (0.006 kg)(9.81 m/s2)
F = 0.05886 N
Substituting these values into the equation for k, we get:
k = -(0.05886 N)/(0.043 m)
k = -1.37 N/m
Now that we have the spring constant, we can calculate the period of motion using the equation:
T = 2π√(m/k)
where T is the period, m is the mass of the block, and k is the spring constant.
The mass of the block is given as 27 g, or 0.027 kg. Substituting this and the value for k into the equation for T, we get:
T = 2π√(0.027 kg/-1.37 N/m)
T = 0.845 s
Therefore, the period of motion for the block is 0.845 seconds.

To know more about motion visit:-

https://brainly.com/question/22810476

#SPJ11

The time difference between the two events in the second inertial system can be found using the equation:

Δx' = γ(Δx - vΔt)

Where Δx' is the observed distance between the two events in the second inertial system (15845 km), Δx is the actual distance between the two events in the first inertial system (8880 km), v is the relative velocity between the two inertial systems, and γ is the Lorentz factor given by:

γ = 1/√(1 - v^2/c^2)

where c is the speed of light.

Solving for Δt, we get:

Δt = (Δx - Δx'/γ) / v

Assuming the relative velocity between the two inertial systems is 0.6c (where c is the speed of light), we get:

γ = 1/√(1 - 0.6^2) = 1.25

Δt = (8880 km - 15845 km/1.25) / (0.6c)

Δt = (8880 km - 12676 km) / (0.6c)

Δt = (-3796 km) / (0.6c)

Using the conversion factor 1 km = 3.33564e-9 s, we can convert this to seconds:

Δt = (-3796 km) / (0.6c) * (1 km / 3.33564e-9 s)

Δt = -0.715 s

Therefore, the time difference between the two events in the second inertial system is -0.715 seconds. This negative sign indicates that the second event is observed to occur before the first event in this inertial system.

learn more  about inertial

#SPJ11

Answer:The electric field and magnetic field in a plane wave are related by the wave impedance of the medium. In a nonmagnetic medium, the wave impedance is given by:

Z = sqrt(μ0/ε0) = 377 Ω

where μ0 is the vacuum permeability and ε0 is the vacuum permittivity.

The electric field can be related to the magnetic field by:

E = cB/Z

where c is the speed of light in the medium.

Substituting the given values:

E = (3.00 x 10^8 m/s)(yˆ/377)(60e^−10z cos(2π×10^8 t−12z))

Simplifying:

E = yˆ(1.59 x 10^-6)e^-10z cos(2π×10^8 t−12z) V/m

learn more about  magnetic field of a plane wave propagating in a nonmagnetic medium

https://brainly.com/question/29763072?referrer=searchResults

#SPJ11

The kinetic energy of the car when it reaches the bottom of the hill is 4.6 J. According to the conservation of energy, the potential energy at the top is converted into kinetic energy at the bottom.

The potential energy of the car at the top of the hill is given by mgh, where m is the mass (0.05 kg), g is the acceleration due to gravity (9.81 m/s^2), and h is the height (0.95 m). Therefore, the potential energy at the top is (0.05 kg) * (9.81 m/s^2) * (0.95 m) = 0.461 J.

According to the conservation of energy, the potential energy at the top is converted into kinetic energy at the bottom. Therefore, the kinetic energy of the car at the bottom is equal to the potential energy at the top. Hence, the kinetic energy at the bottom is 0.461 J, which is approximately 4.6 J.

learn more about energy here:

https://brainly.com/question/30878026

#SPJ11

The work function of the cathode material is approximately 4.97 x 10^-19 J.

The photoelectric effect refers to the phenomenon of electrons being emitted from a material when it is exposed to light. The energy of the photons in the light must be greater than the work function of the material for the electrons to be emitted.

In this experiment, the stopping potential of 2.50 V means that the kinetic energy of the emitted electrons has been completely stopped when they reach the anode. This stopping potential is related to the energy of the photons by the equation:

eV = h*f - Φ

where e is the electron charge, V is the stopping potential, h is Planck's constant, f is the frequency of the light, and Φ is the work function of the cathode material.

To find the frequency of the light, we can use the equation:

E = h*f

where E is the energy of a photon. The energy of a photon is related to its wavelength by the equation:

E = hc/λ

where c is the speed of light and λ is the wavelength of the light.

Substituting these equations, we get:

hf = hc/λ

f = c/λ

Substituting this expression for f into the first equation, we get:

eV = hc/λ - Φ

Solving for Φ, we get:

Φ = hc/λ - eV

Substituting the values given in the problem, we get:

Φ = (6.626 x 10^-34 J s) * (2.998 x 10^8 m/s) / (183 x 10^-9 m) - (1.602 x 10^-19 C) * (2.50 V)

Φ ≈ 4.97 x 10^-19 J

Therefore, the work function of the cathode material is approximately 4.97 x 10^-19 J.

Learn more about photoelectric effect

brainly.com/question/26465043

#SPJ11

We put a negative sign in front of the answer because the total entropy of the universe is decreasing due to the irreversible transfer of heat.

To find the change in entropy of the universe, we need to use the formula ΔS = ΔS_hot + ΔS_cold, where ΔS_hot is the change in entropy of the hot reservoir and ΔS_cold is the change in entropy of the cold reservoir.
First, let's calculate the change in entropy of the hot reservoir. We can use the formula ΔS_hot = Q/T_hot, where Q is the heat transferred to the reservoir and T_hot is the temperature of the reservoir. Plugging in the values given in the problem, we get:
ΔS_hot = 1050 J / 576 K
ΔS_hot = 1.822 J/K
Next, let's calculate the change in entropy of the cold reservoir. We can use the same formula as before, but with the temperature and heat transfer for the cold reservoir. This gives us:
ΔS_cold = -1050 J / 305 K
ΔS_cold = -3.443 J/K
Note that we put a negative sign in front of the answer because heat is leaving the cold reservoir, which means its entropy is decreasing.
Now we can find the total change in entropy of the universe:
ΔS_univ = ΔS_hot + ΔS_cold
ΔS_univ = 1.822 J/K + (-3.443 J/K)
ΔS_univ = -1.621 J/K
Again, we put a negative sign in front of the answer because the total entropy of the universe is decreasing due to the irreversible transfer of heat.
To know more about entropy visit:

https://brainly.com/question/13135498

#SPJ11

Drift velocity is the average velocity of charge carriers (usually electrons) moving in a conductor in the direction opposite to the electric field. It is directly proportional to the strength of the electric field applied to the conductor and inversely proportional to the resistance of the conductor. Therefore, the drift velocity of the charge carriers in a wire changes when the electric field or resistance changes.

In this case, the wire is initially connected to a 1.5 V battery, which creates an electric field in the wire and causes current to flow. Let's assume that the resistance of the wire is constant. When the wire is connected to a DC electric source of 7.0 V, the electric field in the wire increases by a factor of 7.0/1.5 = 4.67. Since the drift velocity is directly proportional to the electric field, we can assume that the drift velocity of the charge carriers in the wire will increase by the same factor of 4.67. In other words, the drift velocity will increase by 367% (i.e., 4.67 minus 1 = 3.67, or 367%).

It is worth noting that the actual change in drift velocity depends on various factors, such as the type of conductor, the temperature, and the concentration of charge carriers. Additionally, if the resistance of the wire changes when it is connected to the 7.0 V source, then the change in drift velocity will be different. However, for the purpose of this question, we assume that the resistance of the wire is constant.

To know more about Drift velocity visit:-

https://brainly.com/question/4269562

#SPJ11

The final temperature is approximately 851 K.There are approximately 0.0905 grams of helium.

We can solve this problem using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

First, we need to convert the initial conditions to SI units:

V1 = 3.50 L = 0.00350[tex]m^3[/tex]

P1 = 0.180 atm = 18,424 Pa

T1 = 41.0°C = 314.15 K

Next, we can solve for the initial number of moles:

n = (P1 V1) / (R T1) = (18,424 Pa) (0.00350 m^3) / [(8.31 J/mol/K) (314.15 K)] ≈ 0.0226 mol

At the final state, the pressure and volume are doubled:

P2 = 2P1 = 36,848 Pa

V2 = 2V1 = 0.00700[tex]m^3[/tex]

We can solve for the final temperature using the ideal gas law again:

T2 = (P2 V2) / (n R) = (36,848 Pa) (0.00700 m^3) / [(0.0226 mol) (8.31 J/mol/K)] ≈ 851 K

Therefore, the final temperature is approximately 851 K.

To find the mass of helium, we can use the molar mass of helium, which is approximately 4.00 g/mol. The mass of helium is then:

m = n M = (0.0226 mol) (4.00 g/mol) ≈ 0.0905 g.

Learn more about ideal gas law here:

https://brainly.com/question/28257995

#SPJ11

Outward pressure due to super-heated gas keeps the Sun's outer layers from continuing to fall inward in a gravitational collapse.

The correct answer is A) Outward pressure due to super-heated gas. The Sun's outer layers are heated to such high temperatures that the gas particles are ionized, meaning they are stripped of their electrons. This creates a plasma, which generates thermal pressure that pushes outward, counteracting the force of gravity. The pressure is created by the energy released from the nuclear fusion occurring in the Sun's core, where hydrogen atoms are fused together to form helium, releasing massive amounts of energy. The strong force between protons is what holds the nucleus of an atom together, but it does not play a role in preventing gravitational collapse. Neutrinos produced by nuclear fusion do escape the Sun, but they do not have enough mass or energy to significantly affect the gas pressure in the outer layers. Electromagnetic repulsion between protons also does not play a significant role in preventing gravitational collapse. Answering more than 100 words, the balance between gravity and pressure in the Sun's outer layers creates a state of equilibrium, which is why the Sun maintains its size and shape.

To know more about nuclear fusion visit:

brainly.com/question/14019172

#SPJ11

The power of the bulb with 75 W and the voltage is 120 V and the current flows through the bulb is 625mA.

From the given,

The power of the bulb = 75 W

the voltage for the bulb = 120 V

The power equals the voltage and current. P = VI, where V is the voltage and I is the current. The unit of power is Watt. Hence, the current

I = P/V

 = 75/ 120

 = 0.625

 = 625 ×10⁻³A

Thus, the current is 625 mA.

The quantity that resists the current flow is called resistance and the resistance is inversely proportional to the current flow. By Ohm's law:

V =IR

R = V/I

voltage = 120 V

current = 0.625 A

Resistance = 120/0.625

                 = 192 Ω

Thus, the resistance is 192 Ω.

Resistance X is needed to reduce the current flow through the bulb is 0.3 A. By using Ohm's law:

R = V/I

  = 120/0.3

  = 400 Ω

Thus, the resistance of 400Ω is required to reduce the current flow of 0.3 A with a voltage is 120V.

To learn more about Ohm's law:

https://brainly.com/question/1247379

#SPJ1

The magnitude of the force exerted by pin 2 is 697.6 N.

To solve this problem, we can use the principle of moments, which states that the sum of the moments of forces acting on an object is equal to the moment of the resultant force about any point.

We can choose any point as the reference point for calculating moments, but it is usually convenient to choose a point where some of the forces act along a line passing through the point, so that their moment becomes zero.

In this case, we can choose point 1 as the reference point, since the vertical component of the reaction force at pin 1 passes through this point and therefore does not produce any moment about it. Let F be the magnitude of the force exerted by pin 2, and let W be the weight of the sign. Then we have:

Sum of moments about point 1 = Moment of force F about point 1 - Moment of weight W about point 1

Since the sign is uniform, its weight acts through its center of mass, which is located at the midpoint of the sign. So, the moment of weight W about point 1 is simply the weight W multiplied by the horizontal distance between point 1 and the center of mass, which is d/2:

Moment of weight W about point 1 = W * (d/2)

Since each pin's reaction force has a vertical component equal to half the sign's weight, the magnitude of the weight is:

W = M * g = 32 kg * 9.81 m/s^2 = 313.92 N

The vertical component of the reaction force at each pin is therefore:

Rv = W/2 = 156.96 N

To find the horizontal component of the reaction force at each pin, we can use trigonometry. The angle between the sign and the horizontal is given by:

θ = arctan(h/H) = arctan(0.9/1.3) = 34.99 degrees

Therefore, the horizontal component of the reaction force at each pin is:

Rh = Rv * tan(θ) = 156.96 N * tan(34.99) = 108.05 N

Since the sign is in equilibrium, the sum of the horizontal components of the reaction forces at the two pins must be zero. Therefore, we have:

Rh1 + Rh2 = 0

Rh2 = -Rh1 = -108.05 N

Now we can use the principle of moments to find the magnitude of the force exerted by pin 2. The distance between point 1 and pin 2 is h, so the moment of force F about point 1 is:

Moment of force F about point 1 = F * h

Setting the sum of moments equal to zero, we have:

F * h - W * (d/2) = 0

Solving for F, we get:

F = (W * d) / (2 * h) = (313.92 N * 2 m) / (2 * 0.9 m) = 697.6 N

For more question on magnitude click on

https://brainly.com/question/30337362

#SPJ11

Since the sign is in equilibrium, the sum of the forces and torques acting on it must be zero. Taking the torques about the point where pin 1 supports the sign, we have:

τ = F2(d/2) - (Mg)(H/2) = 0

where F2 is the magnitude of the force exerted by pin 2, M is the mass of the sign, g is the acceleration due to gravity, H is the height of the sign, and d is the distance between the two pins.

Since each pin's reaction force has a vertical component equal to half the sign's weight, the magnitude of the force exerted by pin 1 is Mg/2. Therefore, the magnitude of the force exerted by pin 2 is also Mg/2.

Substituting these values into the torque equation, we get:

F2(d/2) - (Mg)(H/2) = 0

(0.5Mg)(d/2) - (0.5Mg)(H/2) = 0

0.25Mg(d - H) = 0

d - H = 0

Therefore, the height of the sign is equal to the distance between the two pins:

h = d/2

Substituting the given values for h and M, we get:

h = 0.9 m, M = 32 kg

We can then calculate the weight of the sign:

W = Mg = (32 kg)(9.81 m/s^2) = 313.92 N

Each pin's reaction force has a vertical component equal to half the sign's weight, so the magnitude of the force exerted by each pin is:

F = W/2 = 313.92 N/2 = 156.96 N

Therefore, the magnitude of the force exerted by pin 2 is also 156.96 N.

Learn more about magnitude here : brainly.com/question/15681399

#SPJ11