The solubility at 25 °C of AgCl in pure water and in a 0.0140 M AgNO₃ solution is 1.9 ˣ 10 ⁻³ g / L
Kp of AgCl = 1.76 × 10 ⁻¹⁰
AgCl ⇔ Ag⁺ + Cl ⁻
1.76 ₓ 10 ⁻¹⁰ = s . s
s = 1.33 ˣ 10 ⁻⁵ M
In g/ L = s ˣ molar mass of AgCl
= 1.33 ˣ 10⁻⁵ ˣ 143
= 1.9 ˣ 10 ⁻³ g / L
AgCl ⇔ Ag ⁺ + Cl ⁻
s + 0.0140 s
Kap = (s + 0.0140) . s
1.76 ˣ 10 ⁻¹⁰ = 0.0140 ˣ s
s = 1.26 ˣ 10 ⁻⁸ M
In g/ L = molarity ˣ molar mass
= 1.26 ˣ 10 ⁻⁸ ˣ 143
= 1.8 ˣ 10 ⁻⁶ g/ L
How is solubility defined?
The development of new bonds between the solute and solvent molecules is referred to as solubility. Solubility is the maximum concentration of a solute that dissolves in a known solvent concentration at a given temperature in terms of quantity.
Solubility is affected by what?Solvency is impacted by 4 variables - temperature, strain, extremity, and atomic size. For the majority of solids that dissolve in liquid water, solubility increases with temperature. This is on the grounds that higher temperatures increment the vibration or motor energy of the solute atoms.
Learn more about Solubility:
brainly.com/question/23946616
#SPJ4
with the steps on how to do it
Find w, x, y and z such that the following chemical reaction is balanced. wBa3N₂ + 2H₂O →yBa(OH)2 + 2NH3
The balanced chemical reaction for the given chemical equation is given by; 3Ba3N2 + 6H2O → 6Ba(OH)2 + 2NH3. Therefore, the balanced values for w, x, y and z are 3, 6, 6, and 2, respectively.
The balanced chemical reaction for the given chemical equation can be obtained by following the below steps;
Count the number of atoms of each element on both sides of the chemical equation
Find the coefficients to balance the number of atoms on both sides of the chemical equation
Check the balance of the chemical equation
Write down the balanced chemical equation by putting coefficients to the molecules. The balanced chemical reaction is; 3Ba3N2 + 6H2O → 6Ba(OH)2 + 2NH3. Therefore, the balanced values for w, x, y and z are 3, 6, 6, and 2, respectively.
More on chemical reaction: https://brainly.com/question/22817140
#SPJ11
which type of compound is not classified as an aliphatic hydrocarbon?
The type of compound that is not classified as an aliphatic hydrocarbon is an aromatic compound.
What are aliphatic hydrocarbons?
Aliphatic hydrocarbons are organic compounds that consist of only hydrogen and carbon atoms arranged in an open chain. These are known as alkanes, alkenes, and alkynes.
Aromatic hydrocarbons, on the other hand, are compounds that contain benzene rings or other similar aromatic rings.
a) Alkynes:
Alkynes are hydrocarbons that have at least one triple bond between their carbon atoms. Ethyne, propyne, and butyne are examples of alkynes. They are more reactive than alkenes because the triple bond can be broken to form new bonds with other atoms.b) Aromatic hydrocarbons:
Aromatic hydrocarbons are organic compounds that contain one or more benzene rings. Benzene, toluene, and naphthalene are examples of aromatic hydrocarbons. They are more stable and less reactive than alkanes, alkenes, and alkynes. Aromatic compounds are not classified as aliphatic hydrocarbons.c) Cycloalkanes:
Cycloalkanes are hydrocarbons that have one or more rings of carbon atoms in which each carbon atom has two single bonds and two hydrogen atoms attached. Cyclopropane, cyclobutane, and cyclopentane are examples of cycloalkanes. They are more reactive than alkanes because of the strain caused by the ring structure.d) Alkenes:
Alkenes are hydrocarbons that have at least one double bond between their carbon atoms. Ethene, propene, and butene are examples of alkenes. They are more reactive than alkanes because the double bond can be broken to form new bonds with other atoms.e) Alkanes:
Alkanes are hydrocarbons that have only single covalent bonds between their carbon atoms. Methane, ethane, propane, and butane are some examples of alkanes. They are also known as saturated hydrocarbons because they contain the maximum amount of hydrogen possible, which makes them less reactive.Therefore, the type of compound that is not classified as an aliphatic hydrocarbon is an aromatic compound.
Which type of compound is not classified as an aliphatic hydrocarbon?
a) alkyne
b) aromatic
c) cycloalkane
d) alkene
e) alkane
Learn more about aromatic:
https://brainly.com/question/10117760
#SPJ11
the permanent electric dipole moment of the water molecule (h2o) is 6.2×10−30c⋅m .
The permanent electric dipole moment of the water molecule (H2O) is 6.2×10^−30 C⋅m.
The electric dipole moment is the distance between two equal but opposite charges.
The electric dipole moment for H2O is 6.2 x 10^-30 C⋅m. In general, the electric dipole moment is defined as the product of charge and distance between the charges.The water molecule is polar because of its bent structure and electronegativity.
A permanent dipole is created as a result of the electronegativity difference between hydrogen and oxygen.
Because of the differences in the electronegativity of the atoms, electrons are drawn toward the oxygen atom, generating a negative charge, whereas the hydrogen atoms develop a positive charge as a result of the electron migration, resulting in a net dipole moment of the H2O molecule.
Summary:The water molecule's permanent electric dipole moment is 6.2×10^-30 C⋅m. The dipole moment is created as a result of the polar nature of the molecule, which is caused by differences in electronegativity between the atoms.
Learn more about electric dipole moment click here;
https://brainly.com/question/11626115
#SPJ11
energy that is associated with the relative positions of electrons and nuclei in atoms and molecules is called kinetic energy. thermal energy. potential energy. chemical energy.
Potential energy is a form of energy stored in an object due to its relative position, shape, or configuration, and is one of two types of mechanical energy.
Potential energy is a form of energy stored in an object due to its relative position, shape, or configuration. It is associated with the relative positions of electrons and nuclei in atoms and molecules, and is one of two types of mechanical energy. Kinetic energy is associated with the motion of an object, while potential energy is associated with the position or configuration of an object.
To know more about Potential energy Visit:
https://brainly.com/question/9349250
#SPJ11
draw the structure of the major product formed in the reaction of p‑cymene with n‑bromosuccinimide under the conditions shown. the molecular formula of the product is c10h13br.
Electrophilic addition reaction produces bromopropylbenzene with molecular formula C10H13Br.The reaction of p-cymene with N-bromosuccinimide (NBS) is an example of an electrophilic addition reaction, where the NBS acts as a source of electrophilic bromine and succinimide acts as a radical scavenger. The final product is bromopropylbenzene, which has a molecular formula of C10H13Br and a structure of C10H13Br.
Under the specified circumstances, p-cymene reacts with N-bromosuccinimide (NBS), and one of its hydrogen atoms is changed to a bromine atom. The Hock rearrangement is a radical mechanism that drives this substitution reaction. 1-Bromo-p-cymene is the main byproduct generated. The product has the chemical formula C10H13Br. The aromatic ring of p-cymene gains a halogen substituent when the bromine atom is joined to one of the carbon atoms. This process is frequently used to selectively bromine aromatic molecules.
To know more about Electrophilic Visit:
https://brainly.com/question/29789429
#SPJ11
When p-cymene reacts with N-bromosuccinimide, the major product formed is 1-bromo-2-isopropyl-5-methylbenzene with molecular formula C10H13Br.
P-cymene is a colorless liquid with a sweet odor that has an odor similar to turpentine. It has a melting point of -75 °C and a boiling point of 177 °C. It is used as a food flavoring agent and in the production of plastics, resins, and as a solvent.
N-bromosuccinimide (NBS) is a white crystalline solid that is widely used as a brominating agent in organic synthesis. It is used as a radical initiator and a mild brominating agent, and its use avoids the addition of toxic bromine to organic compounds. Under mild conditions, NBS reacts with allylic and benzylic hydrogen atoms to form the corresponding bromohydrins and bromides.
In the presence of light, N-bromosuccinimide reacts with p-cymene to produce a single product, which is 1-bromo-2-isopropyl-5-methylbenzene with a molecular formula C10H13Br.
The reaction can be represented as shown below; The major product formed in the reaction of p-cymene with N-bromosuccinimide under the conditions shown is 1-bromo-2-isopropyl-5-methylbenzene with a molecular formula of C10H13Br.
To learn more about bromosuccinimide visit;
https://brainly.com/question/31620397
#SPJ11
Could you determine the density of cadmium nitrate usingwater?
I think this may be an easy question that I am overthinking. Cadmium nitrate has a melting point of 59 C so itis liquid and it is water soluble. I think you would normalynot use water to determine it's density...instead use a pipet andflask to do the measurements. However, that doesn't mean youcouldn't measure it's density by way of water displacement,right? So, my thinking is yes. Or am I missing somepoint?
Thanks.
Using water displacement can be a viable method to determine the density of cadmium nitrate.
While it is not a conventional method, water displacement can be used to determine the density of cadmium nitrate. By measuring the volume of a known mass of cadmium nitrate based on the amount of water it displaces, the density can be calculated.
However, it is important to consider the solubility of cadmium nitrate in water and any potential chemical reactions or interactions that may occur. This method can provide an estimation of the density, but it is essential to exercise caution and consider the limitations and potential factors that may affect the accuracy of the measurement.
To learn more about water displacement here
https://brainly.com/question/11663954
#SPJ4
draw the alcohol needed to form isobutyl benzoate (2-methylpropyl benzoate).
To form isobutyl benzoate (2-methylpropyl benzoate), we require alcohol. The alcohol needed is the isobutanol.
CH3
|
CH3-C-CH2-OH
|
H
The reaction between isobutanol and benzoic acid will produce isobutyl benzoate, with water as a byproduct.
The reaction can be written as follows:
CH3(CH2)2CHOH + C6H5COOH → CH3(CH2)2COOC6H5 + H2O
Isobutyl benzoate (2-methylpropyl benzoate) is a fragrance and flavoring agent that is found in many foods and cosmetics.
This ester is made from isobutanol, which is a colorless liquid that is used to produce other chemicals, as well as benzoic acid, which is a crystalline solid that is commonly used as a food preservative.
Isobutyl benzoate is an ester that has a strong, fruity odor and is used as a flavoring agent in food.
The ester is also used in cosmetics as a fragrance.
The compound is formed by the reaction of isobutanol and benzoic acid.
The reaction is catalyzed by sulfuric acid.
The given reaction exhibits the mechanism where CH3(CH2)2CHOH reacts with C6H5COOH to produce CH3(CH2)2COOC6H5 and H2O.
CH3(CH2)2CHOH + C6H5COOH → CH3(CH2)2COOC6H5 + H2O
The process entails the transformation of a carboxylic acid into an ester.
In this case, the alcohol used is isobutanol.
The reaction is reversible, and the equilibrium position of the reaction depends on the relative concentrations of the reactants and products.
Learn more about alcohol at: https://brainly.com/question/29751198
#SPJ11
calculate [h3o+] of the following polyprotic acid solution: 0.120 m h2co3.
The concentration of [H3O+] in the solution is equal to [H+] since H3O+ is the hydrated form of H+ in water.
The concentration of [H3O+] in a 0.120 M H2CO3 (carbonic acid) solution can be determined using the acid dissociation constants and the equilibrium expressions for each dissociation step.
Carbonic acid (H2CO3) is a diprotic acid, meaning it can donate two protons (H+) in separate steps. The dissociation reactions and equilibrium expressions for carbonic acid are as follows:
H2CO3 ⇌ H+ + HCO3- (K1)
HCO3- ⇌ H+ + CO32- (K2)
The acid dissociation constants (Ka) for these steps are known. For carbonic acid, Ka1 is approximately 4.3 × 10^-7 and Ka2 is approximately 5.6 × 10^-11.
To calculate [H3O+] in the solution, we need to consider the dissociation reactions and their equilibrium concentrations. Initially, assume x moles of H2CO3 dissociate to form x moles of H+ and x moles of HCO3-.
From the equilibrium expression for the first dissociation step:
K1 = [H+][HCO3-] / [H2CO3]
Using the given concentration of H2CO3 (0.120 M) and assuming x is small compared to the initial concentration, we can approximate [H2CO3] ≈ 0.120 M.
Substituting the known values into the equilibrium expression and solving for [H+], we find the approximate concentration of [H+] in the solution. Repeat the same process for the second dissociation step using the equilibrium expression for K2.
Finally, the concentration of [H3O+] in the solution is equal to [H+] since H3O+ is the hydrated form of H+ in water.
Learn more about concentration of [H3O+] :
https://brainly.com/question/15224713
#SPJ11
what is the major organic product obtained from the following reaction? naoch2ch3 ch3ch2oh
The reaction NaOCH2CH3 + CH3CH2OH CH3CH2OCH2CH3 + NaOH produces CH3CH2OCH2CH3 as a major organic product. The chemical equation of the reaction is given below: NaOCH2CH3 + CH3CH2OH CH3CH2OCH2CH3 + NaOH.
The given reaction isNaOCH2CH3 + CH3CH2OH → CH3CH2OCH2CH3 + NaOH
The major organic product obtained from the following reaction is CH3CH2OCH2CH3.In the given reaction, CH3CH2OH is reacted with NaOCH2CH3 to get a product. NaOCH2CH3 is sodium ethoxide and CH3CH2OH is ethanol. In this reaction, ethanol acts as a nucleophile and attacks the carbon atom of the ethoxide group. The ethoxide group leaves the molecule along with sodium ion to form NaOH. The chemical equation of the given reaction is given below:NaOCH2CH3 + CH3CH2OH → CH3CH2OCH2CH3 + NaOH
Therefore, the major organic product obtained from the following reaction is CH3CH2OCH2CH3.
To know more about reaction Visit:
https://brainly.com/question/16737295
#SPJ11
The reaction is usually carried out in an aprotic solvent such as dimethylformamide (DMF) or dimethyl sulfoxide (DMSO). The reaction involves the reaction of alkyl halides with sodium alkoxides to produce ethers.
The given reaction is a Williamson Ether Synthesis reaction. In this reaction, alkyl halides react with sodium alkoxides to form ethers.
Here, the given reaction is as follows: NaOCH2CH3 + CH3CH2OH → ProductThe reagents in the given reaction are sodium ethoxide (NaOCH2CH3) and ethanol (CH3CH2OH).
These reactants produce an ether as the product. In a Williamson ether synthesis reaction, the major organic product obtained is an ether.
Therefore, the major organic product obtained from the given reaction is an ether. The Williamson Ether Synthesis reaction is an important reaction in organic chemistry that is widely used to synthesize ethers.
The reaction involves the reaction of alkyl halides with sodium alkoxides to produce ethers. The reaction is usually carried out in an aprotic solvent such as dimethylformamide (DMF) or dimethyl sulfoxide (DMSO).
To learn more about organic visit;
https://brainly.com/question/17164427
#SPJ11
the acid dissociation of acetic acid is . calculate the of a aqueous solution of acetic acid. round your answer to decimal places.
The pH of an aqueous solution of acetic acid is 2.87, calculated using the formula pH = pKa + log ([CH3COO¯]/[CH3COOH]).
The equilibrium constant expression for the above reaction is given below:Ka = [H3O+][CH3COO¯]/[CH3COOH]The pH of an aqueous solution of acetic acid can be calculated by using the following formula:pH = pKa + log ([CH3COO¯]/[CH3COOH])
Firstly, we have to calculate the value of pKa:pKa = -logKaGiven, Ka = 1.8 x 10-5pKa = -log(1.8 x 10-5) = 4.74Next, we have to calculate the concentration of [CH3COO¯] and [CH3COOH]:Let x be the degree of dissociation of acetic acid, then the concentration of [H3O+] will be x M.
The concentration of [CH3COO¯] will also be x M.The concentration of [CH3COOH] will be (0.1 - x) M (since the initial concentration of acetic acid is 0.1 M).Now, substituting the values of pKa, [CH3COO¯], and [CH3COOH] in the above formula we get:pH = 4.74 + log ([x]/[0.1 - x])
Now, we need to calculate the value of x using the quadratic equation:x2 + (1.8 x 10-5) x - (1.8 x 10-6) = 0Solving the above quadratic equation, we get:x = 0.0105 or x = -0.0102 (negative root can be ignored)Now, substituting the value of x in the pH equation, we get:pH = 4.74 + log ([0.0105]/[0.1 - 0.0105])= 2.87Thus, the pH of the aqueous solution of acetic acid is 2.87
The pH of the aqueous solution of acetic acid is 2.87.
The pH of an aqueous solution of acetic acid can be calculated by using the following formula:pH = pKa + log ([CH3COO¯]/[CH3COOH])The concentration of [CH3COO¯], [CH3COOH], and pKa have been calculated as:[CH3COO¯] = 0.0105 M[CH3COOH] = 0.0895 MpKa = 4.74Substituting the values in the above formula we get:pH = 4.74 + log ([0.0105]/[0.0895])= 2.87Therefore, the pH of an aqueous solution of acetic acid is 2.87.
Summary: The pH of an aqueous solution of acetic acid is 2.87, calculated using the formula pH = pKa + log ([CH3COO¯]/[CH3COOH]).
Learn more about acetic acid click here:
https://brainly.com/question/15231908
#SPJ11
which of the following gas samples would be most likely to behave ideally under the stated condition? A) H2 at 400atm and 25 C degree, b) CO at 200atm and 25 C degree, c) Ar at STP, d) N2 at atm and -70 C degree, e) SO2 at 2 atm and 0 K. Please, answer with detail explain.
In chemistry, the ideal gas law is a simple equation that specifies how the physical properties of an ideal gas change as pressure, volume, and temperature are changed. It can be utilized to assess the behavior of a gas under various conditions.
Given conditions in the question, the Ar gas sample at STP (Standard Temperature and Pressure) is most likely to behave ideally. The reason behind this statement is explained below: STP (Standard Temperature and Pressure) is defined as 273 K (0°C) and 1 atm of pressure.
According to the ideal gas law, a gas will act ideally under the given condition if the intermolecular forces between the gas particles are negligible. Intermolecular forces are defined as the forces of attraction between two or more particles. The Ar gas is a noble gas, and as such, it has weak intermolecular forces. The weak intermolecular forces between the Ar gas particles make it an ideal gas under STP conditions. Additionally, Ar gas consists of a single atom and has a zero molecular weight. Hence, it has no volume, which makes it an ideal gas under STP conditions.
Therefore, the Ar gas sample at STP is most likely to behave ideally under the stated condition. The other options, H2 at 400atm and 25 C degree, CO at 200atm and 25 C degree, N2 at atm and -70 C degree, and SO2 at 2 atm and 0 K, have various pressures and temperatures that deviate from the standard conditions, and they may have strong intermolecular forces that make them non-ideal gases.
To learn more about gas visit;
https://brainly.com/question/14812509
#SPJ11
draw the structure of an alkyl halide that could be used in an e2 reaction
An alkyl halide that can undergo an E2 (elimination) reaction typically has a primary or secondary carbon bonded to a halogen atom. Here's an example of structure attached.
In this structure, R represents an alkyl group (such as methyl, ethyl, propyl, etc.), X represents a halogen atom (such as Cl, Br, or I), and the hydrogen atoms attached to the carbon atom labeled as C can be different alkyl groups or hydrogens.
In an E2 reaction, the alkyl halide acts as the substrate and undergoes a bimolecular elimination. During the reaction, a base abstracts a proton from a beta-carbon (carbon adjacent to the carbon with the halogen atom), and simultaneously, the leaving group (halogen) is expelled, resulting in the formation of a double bond.
The reaction proceeds more readily with primary or secondary alkyl halides due to the availability of beta-hydrogens, which are required for the elimination process. Tertiary alkyl halides are generally unreactive in E2 reactions because the steric hindrance around the carbon atom hinders the approach of the base.
To learn more about E2 reaction here
https://brainly.com/question/31327352
#SPJ4
the lewis structure of clo2 is given blow. what is the formal charge on the central chlorine atom? 2045 hw9 group of answer choices 0.5 −1 1 0 2
The formal charge on the central chlorine atom in [tex]ClO_2[/tex] is -1.
To determine the formal charge on the central chlorine atom in the Lewis structure of [tex]ClO_2[/tex], we need to calculate the difference between the valence electrons of the chlorine atom and its assigned electrons in the structure.
In the Lewis structure of [tex]ClO_2[/tex], chlorine (Cl) is bonded to two oxygen (O) atoms with single bonds and has one lone pair of electrons. Oxygen, being more electronegative than chlorine, is assigned all the lone pairs in the structure.
The Lewis structure of [tex]ClO_2[/tex] can be represented as:
O
||
O -- Cl
||
In [tex]ClO_2[/tex], chlorine has 7 valence electrons. It is bonded to two oxygen atoms, which contribute 2 electrons each, and has one lone pair of electrons. Therefore, the total assigned electrons on chlorine are 2 + 2 + 2 + 2 = 8.
The formal charge can be calculated using the formula:
Formal charge = Valence electrons - Assigned electrons
Formal charge on chlorine = 7 - 8 = -1
Hence, the formal charge on the central chlorine atom in [tex]ClO_2[/tex] is -1.
To learn more about formal charge from the given link
https://brainly.com/question/28446255
#SPJ4
what are the dissolved particles in a solution containing a molecular solute?
The dissolved particles in a solution containing a molecular solute are called molecules. A molecular solute is a type of solute that dissolves in water to form molecular solutions. Molecular solutions have molecules as their dissolved particles and the molecules are evenly distributed throughout the solution.
The size of the molecules depends on the size of the solute particles and its ability to mix with water. Some examples of molecular solutes include glucose, sucrose, and ethanol. In a solution, the substance that gets dissolved is known as a solute, while the substance that does the dissolving is referred to as a solvent.
When a molecular solute dissolves in a solvent such as water, it results in a molecular solution. In this solution, the dissolved particles are molecules, that are evenly distributed throughout the solution. The size of the molecules depends on the size of the solute particles and its ability to mix with water. The larger the solute particles, the more challenging it becomes for them to mix with water. Some of the examples of molecular solutes include glucose, sucrose, and ethanol.
Thus, molecular solutes dissolve in water to form a solution of molecules that are evenly distributed throughout.
To know more about molecules, refer
https://brainly.com/question/475709
#SPJ11
how can you tell if a chemical equation represents hydrolysis
To identify hydrolysis in a chemical equation, check for the presence of water as a reactant and the splitting of a compound into two or more components.
Hydrolysis is a chemical reaction in which water molecules are added to a compound, resulting in the splitting of the compound into two or more products. In order to identify whether a chemical equation represents hydrolysis, there are two key factors to consider.
Firstly, look for the presence of water (H2O) as a reactant in the equation. Hydrolysis reactions require water to provide the necessary hydroxide ions (OH-) for the reaction to occur. Therefore, if water is listed as one of the reactants, it is an indication that hydrolysis might be taking place.
Secondly, observe whether the compound undergoing the reaction is being split into two or more components. Hydrolysis typically involves the breaking of chemical bonds within a compound, resulting in the formation of new compounds or ions. The addition of water molecules to the compound facilitates this splitting process. If the equation shows the formation of multiple products from a single reactant, it suggests hydrolysis is occurring.
Learn more about hydrolysis :
https://brainly.com/question/11461355
#SPJ11
Answer:
hydrolysis, in chemistry and physiology, a double decomposition reaction with water as one of the reactants. Thus, if a compound is represented by the formula AB in which A and B are atoms or groups and water is represented by the formula HOH, the hydrolysis reaction may be represented by the reversible chemical equation AB + HOH ⇌ A H + B OH.
Use standard enthalpies of formation to calculate the amount of heat released per kilogram of hydrogen fuel.
Express your answer using four significant figures.
One kilogram of hydrogen fuel contains 1000 g / 2.016 g/mol = 495.05 mol of hydrogen. Therefore, the amount of heat released per kilogram of hydrogen fuel is -142.915 kJ/mol x 495.05 mol = -70,719.6 kJ/kg. To express the answer in four significant figures, it can be rounded to -70,720 kJ/kg.
Enthalpy of formation refers to the enthalpy change that occurs when one mole of a compound is formed from its constituent elements in their standard state. Standard enthalpies of formation are used to determine the amount of heat released per kilogram of hydrogen fuel. The standard enthalpy of the formation of hydrogen gas is zero because it is an element in its standard state. The standard enthalpy of the formation of water is -285.83 kJ/mol. Therefore, the reaction of hydrogen gas with oxygen gas to form water will release 285.83 kJ/mol of heat. Since one mole of water is produced from two moles of hydrogen gas, the heat released per mole of hydrogen gas is -285.83/2 = -142.915 kJ/mol. To calculate the amount of heat released per kilogram of hydrogen fuel, we need to determine how many moles of hydrogen are in one kilogram of hydrogen fuel. The molar mass of hydrogen is 2.016 g/mol. Therefore, one kilogram of hydrogen fuel contains 1000 g / 2.016 g/mol = 495.05 mol of hydrogen. Therefore, the amount of heat released per kilogram of hydrogen fuel is -142.915 kJ/mol x 495.05 mol = -70,719.6 kJ/kg. To express the answer in four significant figures, it can be rounded to -70,720 kJ/kg.
To Know more about Enthalpy of formation visit:
brainly.com/question/30761452
#SPJ11
ethosuximide is formed by a similar pathway to that shown for phensuximide. draw the structure of the compound that reacts with (d).
Ethosuximide and phensuximide are both anticonvulsant drugs that are used to treat epilepsy. Ethosuximide is a medication used to treat absence seizures and is commonly used to control seizures in children.
On the other hand, Phensuximide is a medication used to treat epilepsy in adults. It is used to control or reduce the severity of certain types of seizures in patients with epilepsy. Therefore, Ethosuximide is formed by a similar pathway to that shown for Phensuximide. Ethosuximide is a succinimide anticonvulsant and was first introduced in 1958. Both Ethosuximide and Phensuximide are succinimide anticonvulsants and are used to treat epilepsy. They are both formed by the similar pathway shown below: In the given pathway, the compound that reacts with Phthalic anhydride is 2-ethylmalonic acid. Similarly, Ethosuximide is also formed by the reaction between 2-ethylmalonic acid and urea. Ethosuximide and Phensuximide both contain a succinimide ring structure, which is responsible for their anticonvulsant properties.
To Know more about epilepsy visit:
brainly.com/question/31827927
#SPJ11
what is the percent yield when a reaction vessel that initially contains 62.0 kg ch4 and excess steam yields 16.6 kg h2?
The percent yield of a reaction when a reaction vessel that initially contains 62.0 kg [tex]CH_{4}[/tex] and excess steam yields 16.6 kg [tex]H_{2}[/tex] is 54.68%.
Amount of [tex]CH_{4}[/tex] = 62.0 kg Amount of [tex]H_{2}[/tex] = 16.6 kg. The balanced equation for the reaction is: [tex]CH_{4} + 2H_{2}O = CO_{2} + 4H_{2}[/tex]
Step 1: Calculate the theoretical yield of [tex]H_{2}[/tex].
Theoretical yield of [tex]H_{2}[/tex] = (Amount of [tex]CH_{4}[/tex] ÷ Molecular weight of [tex]CH_{4}[/tex]) × (Molecular weight of H2 ÷ Stoichiometric coefficient of [tex]H_{2}[/tex] ).
The molecular weight of [tex]CH_{4}[/tex] is 16.04 g/mol. The molecular weight of [tex]H_{2}[/tex] is 2.02 g/mol.
The stoichiometric coefficient of [tex]H_{2}[/tex] is 4.So, Theoretical yield of [tex]H_{2}[/tex] = (62,000 ÷ 16.04) × (2.02 ÷ 4) = 30,790 g or 30.79 kg
Step 2: Calculate the percent yield of [tex]H_{2}[/tex]. Percent yield of [tex]H_{2}[/tex] = (Actual yield ÷ Theoretical yield) × 100Given that the Actual yield of H2 is 16.6 kg. So, Percent yield of [tex]H_{2}[/tex] = (16.6 ÷ 30.79) × 100 = 54.68%.
Therefore, the percent yield of a reaction when a reaction vessel that initially contains 62.0 kg [tex]CH_{4}[/tex] and excess steam yields 16.6 kg [tex]H_{2}[/tex] is 54.68%.
For more information on percent yield kindly visit to
https://brainly.com/question/31634582
#SPJ11
draw the structure of benzene, and include all hydrogen atoms.
Benzene is an organic chemical compound with a chemical formula of C6H6. It is composed of six carbon atoms and six hydrogen atoms arranged in a hexagonal ring with alternating double bonds.
Benzene is a colorless, flammable, and sweet-smelling liquid that is widely used as a starting material for the production of many chemicals, including plastics, synthetic fibers, and solvents.The structure of benzene has a ring of six carbon atoms with a hydrogen atom attached to each carbon atom.
The carbon-carbon bonds alternate between single and double bonds to form a stable structure. The structure is sometimes depicted as a hexagon with a circle inside it to represent the delocalized electrons of the double bonds. In this structure, each carbon atom is bonded to two other carbon atoms and one hydrogen atom.
The remaining valency of each carbon atom is occupied by a delocalized pi bond. The structure of benzene can also be represented by a resonance hybrid of two or more equivalent structures.
The delocalized pi electrons in benzene are responsible for its unique chemical and physical properties, including its stability, reactivity, and aromaticity.
To know more about benzene visit -
brainly.com/question/31837011
#SPJ11
Calculate the heat of combustion (kJ) of propane, C3H8 using the listed standard enthalpy of reaction data: C3H8(g)+5O2(g)⟶3CO2(g)+4H2O(g)
The heat of combustion of propane is 2220 kJ/mol. Hence, 2220 kJ of heat is evolved per mole of propane burned completely.
Given DataC3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(g)ΔH° = -2220 kJ/mol of C3H8. We are supposed to calculate the heat of combustion (kJ) of propane, C3H8 using the listed standard enthalpy of reaction data: C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(g).
Solution: We have the balanced chemical equation of the combustion of C3H8, which shows that 1 mole of propane reacts with 5 moles of O2 to produce 3 moles of CO2 and 4 moles of H2O.C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(g)The amount of heat evolved when one mole of propane burns completely is equal to the enthalpy change (ΔH°) of the above combustion reaction. Thus,ΔH° = -2220 kJ/mol of C3H8The above value indicates that 2220 kJ of heat is evolved when 1 mole of propane burns completely. Hence, 2220 kJ of heat is evolved per mole of propane burned completely.Thus, the heat of combustion of propane is 2220 kJ/mol.
To learn more about combustion visit;
https://brainly.com/question/31123826
#SPJ11
The ability to bend a metallic solid is described by the metal's O mobility O ductility malleability O polymeric breakpoint
The ability to bend a metallic solid is described by the metal's ductility and malleability. The correct option to this question is B.
Ductility refers to a material's ability to be stretched or pulled into thin wires without breaking, while malleability refers to a material's ability to be hammered or rolled into thin sheets without cracking.
Both of these properties are important in understanding how easily a metallic solid can be bent or shaped.
When considering the ability to bend a metallic solid, it is important to take into account both ductility and malleability, as they contribute to the overall flexibility and deformability of the material.
For more information on malleability kindly visit to
https://brainly.com/question/1349130
#SPJ11
to separate a mixture of p-toluidine and p-nitrotoluene dissolved in ether,extract the ether solution with aqueous hcl and treat the water layer with aqueous naoh. true
The answer to the given question is given as follows:
given question talks about separating a mixture of p-toluidine and p-nitrotoluene dissolved in ether. To separate this mixture, we need to extract the ether solution with aqueous HCl and then treat the water layer with aqueous NaOH.
Now, we will discuss each step of this process in detail:
Step 1: Extraction of Ether Solution with Aqueous HCl
In this step, we are going to extract the ether solution with aqueous HCl. This step is carried out to convert p-nitrotoluene into p-nitrotoluene acid. The basic principle of this step is that p-toluidine is a base and p-nitrotoluene is a neutral compound. Therefore, when we add HCl, it will protonate p-toluidine, and it will form an ion that will be extracted in the aqueous phase. Whereas, p-nitrotoluene will remain in the organic phase. The resulting mixture will contain an aqueous layer and an organic layer. The organic layer is of our interest as it contains the compound that we are going to extract.
Step 2: Treatment of the Water Layer with Aqueous NaOH
In this step, we are going to treat the water layer with aqueous NaOH. This step is carried out to convert p-nitrotoluene acid into p-nitrotoluene. The basic principle of this step is that p-nitrotoluene acid is an acid, and when we add NaOH, it will react with p-nitrotoluene acid and convert it into p-nitrotoluene.
This reaction is given below:
p-nitrotoluene acid + NaOH → p-nitrotoluene + NaNO2 + H2O
This reaction takes place only in the aqueous phase as both the reactants are present in the aqueous layer. So, the resulting mixture will contain an aqueous layer and an organic layer. The organic layer is of our interest as it contains the compound that we are going to extract.
Step 3: Final Extraction of Organic Layer
In this step, we are going to extract the organic layer from the mixture. The organic layer contains the compound that we are going to extract. So, we can evaporate the solvent, and we will get the desired compound that is p-nitrotoluene. Hence, the final product of this process will be p-nitrotoluene.
Learn more about p-toluidine and p-nitrotoluene from this link:
https://brainly.in/question/1837733
#SPJ11
Which of the following contains a delocalized π bond? Check all that apply. □ H2O □ HCN HCN cos □ CO32- 2
The species that contain a delocalized π bond are:
- CO₃²⁻ (carbonate ion)
- O₃ (ozone)
- HCN
To identify which species contain a delocalized π bond, let's analyze each option:
- CO₃²⁻ (carbonate ion): The carbonate ion does contain a delocalized π bond. It exhibits resonance, with the double bond alternating between the carbon and oxygen atoms. This results in the delocalization of π electrons over the entire ion.
- H₂O (water): H₂O does not contain a delocalized π bond. It consists of two polar covalent O-H bonds and the electrons in these bonds are localized between the oxygen and hydrogen atoms.
- O₃ (ozone): O₃ contains a delocalized π bond. It has a resonance structure in which the double bond moves between the three oxygen atoms. This results in the delocalization of π electrons over the three oxygen atoms.
- HCN: HCN does contain a delocalized π bond. The molecule consists of a triple bond between carbon (C) and nitrogen (N), with the π electrons being shared and delocalized between the two atoms.
The correct question is:
Which of the species contains a delocalized π bond?
- CO₃²⁻
- H₂O
- O₃
- HCN
Learn more about π bond at https://brainly.com/question/18114979
#SPJ11
a current of 4.65 a is passed through a fe(no3)2 solution. how long, in hours, would this current have to be applied to plate out 5.50 g of iron?
It is given that a current of 4.65 A is passed through an Fe(NO3)2 solution. We need to find out how long, in hours, this current must be applied to plate out 5.50 g of iron.
To solve the given problem, we will use the following equation. Faraday's first law of electrolysis states that the amount of substance produced during electrolysis is directly proportional to the quantity of electricity passed through the electrolyte.=×××Where, = Mass of substance produced = Electrochemical equivalent of the substance = Faraday's constant = 96500 C mol⁻¹ = Current passed = Time of passage of current. Substituting the values, Mass of Fe = 5.50 g
Electrochemical equivalent of iron, = 56.0 g of Fe is deposited by 96500 C of electricity passing through a solution.Current, = 4.65 A Time, = ?
Therefore,=×××⇒=/××=5.50/(56.0×96500×4.65) hours=0.0022 hours=0.0022×60 minutes=0.13 minutes
Hence, the current of 4.65 A would have to be applied for 0.13 minutes (approx) to plate out 5.50 g of iron.
To learn more about solution visit;
https://brainly.com/question/1616939
#SPJ11
write the balanced chemical equation associated with the formation constant, f , for each complex ion. include phase symbols. alf3−6 : al ↽−−⇀ cd(nh3)2 6 : ↽−−⇀
The balanced chemical equation associated with the formation constant, f , for each complex ion is as follows:AlF3-6: Al³⁺(aq) + 3F⁻(aq) ⇌ AlF₃(s)Kf = [AlF₃⁻⁶]/([Al³⁺][F⁻]³)Cd(NH₃)₂⁶: Cd²⁺(aq) + 2NH₃(aq) ⇌ Cd(NH₃)₂²⁺(aq)Kf = [Cd(NH₃)₂²⁺]/([Cd²⁺][NH₃]²)Explanation: Chemical constants are known as complex formation constants.
They are used to describe the equilibrium constant for the formation of a complex ion from its constituent parts. Complexes are formed when a molecule or ion (known as the ligand) binds to a central metal ion (known as the cation) in a coordinated way. Ligands bind to metal cations through a number of interactions, including covalent bonding, electrostatic interactions, and hydrogen bonding.Constant formation is defined as the formation of a complex ion from its constituents. The complex formation constant is defined as the equilibrium constant for the reaction that forms the complex. The equilibrium constant is denoted by Kf, and it is given by:[Complex]/([Ligand]n[Cation]m)Here, n and m represent the number of ligands and cations in the complex, respectively. If the complex is an anion, then it is written with a negative sign in front of the formula. The value of Kf depends on the ligand, the cation, and the solvent.
For more information on equilibrium constant visit:
brainly.com/question/28559466
#SPJ11
you are at 30º s and 160º e; you move to a new location which is 50º to the north and 40º to the east, of your present location
You are located at 30° S and 160° E. By moving to a new location 50° north and 40° east of your current location, you will now be located at 20° S and 200° E. Hence, your new location is 20° S and 200° E. This is because if you move north, you will have to subtract the degrees from 90.
To get the new location, you will need to add 50° to your current location. Since the direction is towards the north, you will be adding a positive value. So, the new latitude would be 30° + 50° = 80° N. Then, add 40° to your current location for the eastward direction, which is positive. Therefore, the new longitude would be 160° + 40° = 200° E. Hence, your new location is 20° S and 200° E. This is because if you move north, you will have to subtract the degrees from 90, and if you move east, you will have to add the degrees from the starting longitude. You can check the location on a world map to have a better understanding of the new location.
To Know more about the eastward direction visit:
brainly.com/question/29642760
#SPJ11
burning of 15.5 g of propane: c3h8(g)+5o2(g)→3co2(g)+4h2o(l) δh∘=−2220 kj
The enthalpy change of combustion of 15.5 g of propane is -778 kJ.
Propane, C3H8, reacts with oxygen, O2, to form carbon dioxide, CO2, and water, H2O. The enthalpy change of combustion, ΔHcomb, is the energy change when one mole of a substance is completely burnt in excess oxygen under standard conditions. To calculate the enthalpy change of combustion of propane, we first need to write a balanced equation for the reaction. The balanced equation is given as:C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(l)We are given that ΔH∘comb = -2220 kJ for the combustion of propane. This means that the combustion of one mole of propane releases 2220 kJ of energy. We can use this information to calculate the enthalpy change of combustion of 15.5 g of propane.To calculate the enthalpy change of combustion of 15.5 g of propane, we first need to calculate the number of moles of propane in 15.5 g. The molar mass of propane is:Mr = (3 x 12.01 g/mol) + (8 x 1.01 g/mol)Mr = 44.1 g/molThe number of moles of propane in 15.5 g is:n = m/Mrn = 15.5 g / 44.1 g/moln = 0.351 molNow, we can use the enthalpy change of combustion per mole of propane to calculate the enthalpy change of combustion of 0.351 mol of propane.ΔHcomb = n x ΔH∘combΔHcomb = (0.351 mol) x (-2220 kJ/mol)ΔHcomb = -778 kJ
Learn more about nthalpy change here :-
https://brainly.com/question/29556033
#SPJ11
Burning 15.5 g of propane releases approximately 778.02 kJ of heat.
The balanced equation for the burning of 15.5 g of propane (C₃H₈) is:
C₃H₈(g) + 5O₂(g) → 3CO₂(g) + 4H₂O(l)
To calculate the heat released during the burning of 15.5 g of propane, we need to use the molar mass of propane and convert it to moles.
The molar mass of propane (C₃H₈) is:
C: 12.01 g/mol
H: 1.01 g/mol
Molar mass of C₃H₈ = 3(12.01 g/mol) + 8(1.01 g/mol) = 44.11 g/mol
Next, we calculate the number of moles of propane burned:
moles of C₃H₈ = mass / molar mass = 15.5 g / 44.11 g/mol ≈ 0.351 mol
Now we can calculate the heat released using the molar ratio and the ΔH° value:
ΔH = ΔH° x moles of propane
ΔH = -2220 kJ x 0.351 mol ≈ -778.02 kJ
Learn more about propane at https://brainly.com/question/30044521
#SPJ11
what are both carbon-14 and potassium-argon dating techniques based on?
Carbon-14 and potassium-argon dating techniques are both based on the decay of radioactive isotopes.
Radioactive isotopes are unstable atoms that spontaneously decay into stable atoms by releasing radiation. Carbon-14 and potassium-argon dating are two methods that scientists use to determine the age of rocks and fossils.Carbon-14 dating is used to determine the age of organic material such as fossils and archaeological artifacts. It is based on the fact that carbon-14 is a radioactive isotope of carbon that decays over time. Carbon-14 has a half-life of approximately 5,700 years, which means that it takes 5,700 years for half of the carbon-14 atoms in a sample to decay. By measuring the amount of carbon-14 remaining in a sample, scientists can estimate how long ago the organism that produced the sample died.
Potassium-argon dating is used to determine the age of rocks and minerals, particularly volcanic rocks. It is based on the fact that potassium-40 is a radioactive isotope of potassium that decays over time into argon-40. Potassium-40 has a half-life of approximately 1.3 billion years, which means that it takes 1.3 billion years for half of the potassium-40 atoms in a sample to decay. By measuring the amount of potassium-40 and argon-40 in a sample of volcanic rock, scientists can estimate how long ago the rock solidified.
Learn more about carbon-14 at https://brainly.com/question/30270839
#SPJ11
how many liters of no can be produced when 25l 02 are reacted with 25l nh3?
25 L of NO can be produced when 25 L of O2 are reacted with 25 L of NH3.
The balanced equation for the reaction between O2 and NH3 is given below;4 NH3 + 5 O2 → 4 NO + 6 H2OFrom the balanced equation above, 4 moles of NH3 react with 5 moles of O2 to produce 4 moles of NO and 6 moles of water. Now let's calculate the number of moles of O2 available;
Moles of O2 = Volume of O2 ÷ Molar volume= 25/22.4= 1.116 moles of O2Now we need to find the number of moles of NH3;Since the volume of NH3 is the same as O2,Moless of NH3 = Volume of NH3 ÷ Molar volume= 25/22.4= 1.116 moles of NH3
The reaction between 1.116 moles of NH3 and 1.116 moles of O2 produces 1.116 moles of NO. The volume of NO produced can be calculated as follows; Volume of NO = Number of moles of NO x Molar volume of NO= 1.116 x 22.4= 25 L
Therefore, 25 L of NO can be produced when 25 L of O2 are reacted with 25 L of NH3.
To learn more about reaction visit;
https://brainly.com/question/30464598
#SPJ11
. does the melting point tell you that your product is relatively pure? explain your answer.
The melting point tells you that your product is relatively pure. A melting point is the temperature at which a solid turns into a liquid. It is a physical property of a substance and can be used to help determine its purity. Pure substances have a distinct and constant melting point, while impure substances have a melting point range that is lower than the pure substance's melting point.
This is because impurities interfere with the arrangement of particles in the solid, which makes it more difficult for the solid to melt. The more impurities a substance has, the more the melting point range deviates from the pure substance's melting point. A relatively pure product will have a narrow melting point range, and its melting point will be close to the melting point of the pure substance. Therefore, the melting point is an essential property to determine the purity of a substance. To summarize, the melting point of a substance tells you about its purity. A pure substance has a constant melting point, while impurities cause the melting point range to be lower than the melting point of the pure substance. Therefore, a relatively pure product will have a narrow melting point range that is close to the melting point of the pure substance.
For more information on melting point visit:
brainly.com/question/20551307
#SPJ11