Answer:
What is the radius of the table tennis ball?
⇒ 2.1 cm
What is the radius of the golf ball?
2.0 cm
Explanation:
divide the radius and round it to the nearest 10th place..... but hope that help ;)
Answer:
1) What is the radius of the table tennis ball?
2.1 cm
2) What is the radius of the golf ball?
2.0 cm
Explanation:
Did this on Edge 2023 and got it right. Hope this helps :)
Light rays that are reflected twice inside a rain water droplet can produce a second-order rainbow. True False mim
Answer:
Yes
Explanation:
El tubo de entrada que suministra presión de aire para operar un gato hidráulico tiene 2 cm de diámetro. El pistón de salida es de 32 cm de diámetro. ¿Qué presión de aire se tendrá de aire se tendrá que usar para levantar un automóvil de 17,640 N?`
Answer:
La presión neumática para levantar un automóvil de 17,640 newtons es 220,500 pascales.
Explanation:
Asumiendo que la presión ([tex]P[/tex]), medida en pascales, tiene una distribución uniforme sobre la superficie del pistón, se calcula a partir de la siguiente expresion:
[tex]P = \frac{F}{A}[/tex]
Donde:
[tex]F[/tex] - Fuerza motriz, medida en newtons.
[tex]A[/tex] - Área del pistón, medida en metros cuadrados.
La fuerza motriz es equivalente al peso del automóvil. El área del pistón ([tex]A[/tex]), medido en metros cuadrados, es determinado por:
[tex]A=\frac{\pi}{4}\cdot D^{2}[/tex]
Donde [tex]D[/tex] es el diámetro del pistón, medido en metros.
Si [tex]D = 0.32\,m[/tex] y [tex]F =17,640\,N[/tex], entonces la presión neumática es:
[tex]A = \frac{\pi}{4}\cdot (0.32\,m)^{2}[/tex]
[tex]A \approx 0.080\,m^{2}[/tex]
[tex]P = \frac{17,640\,N}{0.080\,m^{2}}[/tex]
[tex]P = 220,500\,Pa[/tex]
La presión neumática para levantar un automóvil de 17,640 newtons es 220,500 pascales.
Katie rolls a toy car off the end of a table. Which path will the car follow when it leaves the table? A. B. C. D.
Answer:
parabolic path
Explanation:
As the cart reaches the end of the table with a horizontally directed velocity (only horizontal component), the cart will follow a parabolic path given by the combined action of:
(1) kinematic equation for motion under constant velocity in the horizontal direction (linear expression in terms of time), and
(2) kinematic equation for motion under constant acceleration (that of gravity) in the vertical direction (quadratic expression in terms of time)
Answer:
C.
Explanation:
Due to gravity and air resistance— its gonna make a curved path
Does anybody know to solve this?
Answer:
25600 cm
2.56 x 10⁴ cm
Explanation:
Step 1: Find conversion
There are 100 cm in 1 m.
Step 2: Set up dimensional analysis
[tex]256m(\frac{100cm}{1 m} )[/tex]
Step 3: Multiply and cancel out units
25600 cm
2.56 x 10⁴ cm
An athlete needs to lose weight and decides to do it by “pumping iron.” (a) How many times must an 90.0 kg weight be lifted a distance of 0.890 m in order to burn off 1.00 lb of fat, assuming that that much fat is equivalent to 3500 kcal? (b) If the weight is lifted once every 2.10 s, how long does the task take?
Answer:
230kg would be the best answer
Explanation:
Alice drops a rock to a well. She hears the splash of the rock 4.1s later. The speed of sound is 340m/s. How deep is the well
Answer:
697 m
Explanation:
From the question above,
Note: Alice hears the splash of the rock in the well through the help of echo.
Applying,
v = 2x/t........................ Equation 1
Where v = speed of sound, x = depth of the well, t = time.
make x the subject of the formula in equation 1
x = vt/2................... Equation 2.
Given: v = 340 m/s, t = 4.1 s
Substitute these values into equation 2
x = 340(4.1)/2
x = 697 m.
In the park, there are 25 pigeons, 15 squirrels, 5 rabbits, and 5 stray cats. Why
can't you draw a line graph using only this information?
Answer: Line graph should be used to show how one variable changes over time not to show multiple categories or variables are at one specific point in time.
Explanation:
In maths, statistics, and related fields, graphs are used to visually display variables and their values. In the case of line graphs, these are mainly used to display evolution or change of a variable over time. For example, a line graph can show how the number of divorces changed from 1920 to 2010.
In this context, the number of different animals in the park cannot be represented through a line graph because this situation does not imply a variable changing over time. Moreover, this situation includes multiple variables or categories of animals and the data shows only one specific point in time, which can be better represented through a bar graph.
Any body moving with simple harmonic motion is being acted on by a force that is:__________.
a) proportional to a sine or cosine function of the displacement
b) directly proportional to the displacement
c) proportional to the inverse square of the displacement
d) constant
Answer:
B
Explanation:
Because this oscillations occur when the restoring force is directly proportional to displacement, given as
F=-kx
Where k= force constant
X= displacement
The digital exchange of structured data is called ?
Answer:
Electronic data interchange
A 21.3 A current flows in a long, straight wire. Find the strength of the resulting magnetic field at a distance of 45.7 cm from the wire.
Answer:
The magnetic field strength due to current flowing in the wire is9.322 x 10⁻⁶ T.
Explanation:
Given;
electric current, I = 21.3 A
distance of the magnetic field from the wire, R = 45.7 cm = 0.457 m
The strength of the resulting magnetic field at the given distance is calculated as;
[tex]B = \frac{\mu_o I}{2\pi R}[/tex]
Where;
μ₀ is permeability of free space = 4π x 10⁻⁷ T.m/A
[tex]B = \frac{\mu_o I}{2\pi R}\\\\B = \frac{4\pi*10^{-7} *21.3}{2\pi(0.457)}\\\\B = 9.322 *10^{-6} \ T[/tex]
Therefore, the magnetic field strength due to current flowing in the wire is 9.322 x 10⁻⁶ T.
An agent has just listed a power plant. This is an example of what type of real estate?
Answer: industrial properties
Explanation:
The power plant listed by the agent falls under industrial property. An industria property is a property which is either used in manufacturing, rentage, warehousing, processing e.t.c.
in this case the plant Would be used in the generation of power which would be sold. so yes the property falls under the category
Generator What does RPM stand for? What four things can you adjust to get the highest maximum voltage?
Answer:
revolution per minutes
Explanation:
increase number of turns on coil
increase speed
use of permanent magnet
increase in speed of object
RPM stands for revolution per minutes.
The four things you can adjust to get the highest maximum voltage are the number of turns of coil, the strength of the magnetic field, the area of the coil, and the angular frequency of the coil.
RPM stands for revolution per minutes; which describes the number of turns made by the coil in a single minute.
The induced voltage in the generator coil is calculated as follows;
[tex]E_{max} = NBA \omega[/tex]
where;
N is the number of turnsB is the strength of the magnetic fieldA is the area of the coilω is the angular frequencyThus, the four things you can adjust to get the highest maximum voltage are the number of turns of coil, the strength of the magnetic field, the area of the coil, and the angular frequency of the coil.
Learn more here:https://brainly.com/question/12903764
Consider position [x] = L, time [t] = T, velocity [v] = L/T and acceleration [a] = L/T 2 . Find the exponent A in the equation v = a^2 t^ A /x
Answer:
The exponent A in the equation is 3.
Explanation:
v = a^2 t^ A /x
[tex]v = \frac{a^2t^A}{x} \\\\vx = a^2t^A\\\\(\frac{L}{T})(L) = (\frac{L}{T^2})^2(T)^A\\\\ \frac{L^2}{T}= (\frac{L^2}{T^4})(T)^A\\\\ \frac{L^2}{T} *\frac{T^4}{L^2} = (T)^A\\\\T^3 = T^A\\\\\frac{T^3}{T^3} = \frac{T^A}{T^3}\\\\T^{3-3} = T^{A-3}\\\\3-3 = A-3\\\\0 = A-3\\\\A = 3[/tex]
Therefore, the exponent A in the equation is 3.
In which of these star groups would you mostly likely find the least heavy-element abundance for the stars within them: open clusters, globular clusters, or associations?
Answer: globular clusters
Explanation:
A globular cluster is a star which is usually spherical, it’s a collection of stars which is known to orbits a galactic core. Globular clusters are usually very tightly bound together by gravity, this helps in giving them their spherical shapes which they are known for, and it’s relatively high stellar densities which is found toward their centers.
Four students measured the same line with a ruler like the one shown below. The results were as follows: 5.52 cm, 6.63 cm, 5.5, and 5.93. Even though you cannot see the line they actually measured, which of the recorded measurements are possible valid measurements for this instrument, according to its precision? Select all that apply. 1. 5.52 2. 6.63 3. 5.5 4. 5.93
Answer:
correct answer is 1 and 3
Explanation:
In direct measurement with an instrument, the precision or absolute error of the instrument is given by its appreciation, in this case we see that the measurements have two decimal places, so the appreciation of the instrument must be 0.01 cm
Based on this appreciation, the valid measurements are 5.52 and 5.5.
the other two measurements have errors much higher than the assessment of the instrument, for which there must have been some errors in the measurement.
The correct answer is 1 and 3
The volume of a ball was measured at 500.0 cm3, and then mass was measured on this triple beam balance. What would be the most accurate reading for the mass of the ball?Using this mass, what would be the most accurate calculation of density for the ball? Round to the nearest ten thousandths.
Answer:
the answer is 0.8084
Explanation:
i just did it and got it correct
Which of the following could not be responsible for the acceleration of an object? wind gravity density friction
Answer:
The correct answer to this question is D) Density
EXPLANATION:
From Newton's second laws of motion, we know that the external force acting on a body is equal to the product of mass with the acceleration of the body.
Mathematically Force F = m × a
Here, m is the mass of the body.
a is the acceleration of the body.
Hence, it is the force which is responsible for creating acceleration in an object.
In the given question, we have four factors i.e wind, friction, gravity and density.
Out of the four options, wind, friction and gravity can exert force on an object and can create acceleration in it.
The density of a body is defined as the mass of that body per unit volume.
Mathematically it is written as -
Density d = \frac{m}{v} where v is the volume occupied by the body.
Hence, density will not be responsible for the acceleration of the body.
Answer:
Density
Explanation:
Hope this helps and its different for everyone for me it was C what was it for you
1
Name two safety measures commonly used in electric circuits and
appliances
lectric
Answer:
always use insulated wire and use all the electrical appliances in proper way
14in^2
express your answer to two significant figures and include the appropriate units.
Answer:
= 9.3*10^-3m²
Explanation:
To solve this we must do some conversions
So we know that
1 inch=0.0254 m
And
So 1 inch x 1 inch = 6.4514 x 10^-m²
So 14 inch²= 14 * (6.4514 x 10^-4m²)
= 9.3*10^-3m²
Choose the box as the system of interest. What objects in the surroundings exert significant forces on this system
Answer:
Hello your question is incomplete attached below is the complete question
Your are lifting a heavy box we will consider this process for different choices of system and surroundings
Choose the box as the system of interest. What objects in the surroundings exert significant forces on this system
The floor the box you nonethe earthanswer : The earth and YOU
Explanation:
The objects that will exert significant force on this system would be the force exerted by the earth and force exerted by you
This is because the force exerted by the earth is an internal force and it can be calculated as : m*g ( mass of the object * acceleration due to gravity ) also the force exerted by you are force due to normal reaction when lifting a load
An ion has a mass of 6.79 × 10-27 kg and a charge of +4e. What is the magnitude of the electric field that will balance the gravitational force on the particle?
Answer:
Explanation:
200.34
Describe the movement of molecules in solids, liquids, and gases.Be sure to explain why the molecules move differently in each state of matter.
will mark brainliest
Answer:
The movement of molecules in a matter is random. Molecules vibrate, and collide with neighboring molecules. According to the gas laws, this collisions are perfectly elastic, and do not lead to energy or momentum loss. The kinetic energy of motion of the molecules is dependent on the temperature of the matter, and molecules of hotter matters vibrates faster than that of a colder matter.
In the different states of matter, the motion of the molecules varies. Solid molecules move the least because of the stronger bond relative to the kinetic energy of the molecule. This is why solid matters can keep their shapes, and are not easily compressed. Liquids molecules move more that solid molecules, but are still relatively close together. Bonds in liquid molecules are less strong than that of solid molecules, and hence they do not have a definite shape but take the shape of their container. Gas molecules travel at great speed, and move very much far from each other. The bond strength between gas molecules are negligible, and they are highly compressible.
Answer:
gas vibrate and move freely at high speeds. liquid vibrate, move about, and slide past each other. solid vibrate but generally do not move from place to place
When you use a graduated cylinder in the lab, you can only use it to find the volume of liquids. (5 points)
True
False
Answer:
false
Explanation:
you can't only use it to find the volume of liquids
Unit 1 Horizontal Kinematics Homework #3 Acceleration 1. A bowling ball starts from rest and moves 300 m down the gutter in 22.4 seconds. a) What is its speed at the end of the track? b) What is its acceleration?
Answer:
Explanation:
since the object start its motion from rest and ends its motion at 300 m so
ΔS=S2-S1=300m-0m=300 m
given time is 22.4 sec therefore
v=ΔS/t
v=300/22.4=14.7 m/s
so the speed of the ball at the end of the track is 14.7 m/s
now to find the acceleration we know that
a=v/t
a=14.7/2.4
a=0.65m/sec²
What is the approximate radius of a nitrogen nucleus that has seven protons and seven neutrons?
Answer:
3.5E-15m
Explanation:
Using
R= Ro A^ 1/3
Where Ro= 1.2fm
and A= 7
= 1.2*10^-15 x (7)^1/3
= 3.5*10^-15m
A 1000 kg elevator is accelerated upward at a rate of 0.70 m/s2. What is the tension in the cable pulling the elevator upward when it experiences this acceleration?
Answer:
[tex]\Huge \boxed{\mathrm{700 \ N}}[/tex]
Explanation:
Tension is the force exerted.
[tex]\sf Force \ (N) = mass \ (kg) \cdot acceleration \ (m/s^2)[/tex]
[tex]F=1000 \cdot 0.70[/tex]
[tex]F=700[/tex]
The tension in the cable is 700 N.
The tension of an body moving upward can be calculated from its weight and normal force. The tension in cable pulling with an acceleration of 0.7 m/s² is 10500 N.
What is tension?Tension is kind of force actually made by pulling a moving body. Like the force exerted by a cable, chain, string or a rope etc.
When an object gains potential energy with a restoring force if existing , then the restoring force will create a tension force. It is a transmitted force and can be calculated from the normal force acting.
It is given that the mass of the elevator is 1000 Kg, then its weight is mass multiplied by gravity of 9.8 m/s². Thus weight of the elevator is 1000 × 9.8 m/s² = 9800 N
The normal force is F = ma is calculated from the mass and acceleration as follows:
F = ma
= 1000 kg ×0.70 m/s²
= 700 N.
The tension force is the sum of weight of he body and the normal force,
Thus T = w + ma
T = 9800 N + 700 N
= 10500 N.
Therefore, tension in cable pulling with an acceleration of 0.7 m/s² is 10500 N.
To find more about tension, refer the link below:
https://brainly.com/question/2287912
#SPJ2
A worker is pushing a crate of tools up a ramp into a truck. The crate has a mass of 120 kg and is accelerating at a rate of 1.05 m/s^2. Once he finishes pushing that crate up, he then takes another crate that is 3 times as massive and pushes it up the ramp with an acceleration of 0.71 m/s^2. What is the ratio of the force the worker used on the on the 120 kg crate and the more massive crate?
Answer:
B) 0.493
Explanation:
First Crate
Formula: F=ma
120kg*1.05m/s^2= 126N
Second Crate
Formula: F=ma
3*120kg=360kg
360kg*0.71m/s^2=255.6
Find the ratio by dividing
120kg/255.6kg=0.4929
Round 0.4929=0.493
Hope this Helps!!
The aqueous humor in a person's eye is exerting a force of 0.242 N on the 1.21 cm2 area of the cornea. What pressure is this in mm Hg?
Answer:
15.00124mmHgExplanation:
Pressure is defined as the ratio of force applied to an object to its area.
Pressure = Force/Area
Given parameters
Force = 0.242N
Area = 1.21cm²
Required parameters
Pressure = 0.242/1.21
Pressure = 0.2N/cm²
Using the conversion to convert the pressure to mmHg
1N/cm² = 75.0062mmHg
0.2N/cm² = y
y = 0.2 * 75.0062
y = 15.00124mmHg
Hence the pressure in mmHg is 15.00124mmHg
Which of the following statements is/are true for ultrasonic test?a. Equipment used for ultrasonic testing is portableb. Complicated shapes can be easily scannedc. Waves generated are health hazardousd. All the above statements are true
Answer:
Equipment used for ultrasonic testing is portable
Explanation:
An ultrasonic tester is used to detect flaws such as cracks and leaks. Hence, an ultrasonic tester is an integral tool used in material testing and engineering, manufacturing quality control, equipment condition monitoring, building and bridge inspection and much more.
Ultrasonic testing can be performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, although with less resolution.
A creature moves at a speed of 7.86 furlongs/fortnight (not a very common unit of speed). If 1.0 furlong = 220 yards 1 fortnight = 14 days 1 yard = 0.9144 meter and 1 day= 86400 sec find the speed of the creature (which is probably a snail).
1. 2.28745 × 109 m/s
2. 0.00130719 m/s
3. 1.16706 × 107 m/s
4. 47261.3 m/s
5. 0.25621 m/s
6. 39516.4 m/s
7. 5.29359 × 10−6 m/s
Answer:
2 0.00130719 m/s
Explanation:
Now we have
7.86 furlongs/fortnight
7.86 x 220 yards / fortnight
1729.2yards / fortnight
1647.8 yards / 14 days
123.5yards / day
So
123.5 x 0.9144 meter / day
112.meters / day
=112.9meters / 86400s
= 0.001307m/s