Answer:
1.5 × 10²⁴ atoms Mn
General Formulas and Concepts:
Chemistry - Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
2.5 mol Mn
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[tex]2.5 \ mol \ Mn(\frac{6.022 \cdot 10^{23} \ atoms \ Mn}{1 \ mol \ Mn} )[/tex] = 1.5055 × 10²⁴ atoms Mn
Step 4: Check
We are given 2 sig figs. Follow sig fig rules and round.
1.5055 × 10²⁴ atoms Mn ≈ 1.5 × 10²⁴ atoms Mn
2. What is the mass of 5.3 moles of CaCl2?
Answer:
590 g CaCl₂
General Formulas and Concepts:
Chemistry - Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisExplanation:
Step 1: Define
5.3 mol CaCl₂
Step 2: Identify Conversions
Molar Mass of Ca - 40.08 g/mol
Molar Mass of Cl - 35.45 g/mol
Molar Mass of CaCl₂ - 40.08 + 2(35.45) = 110.98 g/mol
Step 3: Convert
[tex]5.3 \ mol \ CaCl_2(\frac{110.98 \ g \ CaCl_2}{1 \ mol \ CaCl_2} )[/tex] = 588.194 g CaCl₂
Step 4: Check
We are given 2 sig figs. Follow sig fig rules and round.
588.194 g CaCl₂ ≈ 590 g CaCl₂
calculate the percentage of iron in iron (III) sulphate
Answer:
28.01 percent
Explanation:
Iron (III) sulphate, [tex]Fe_2(SO_4)_3[/tex], has 2 atoms of Fe.
One atom of Fe has a molar weight of 56. Hence, 2 atoms of Fe would have a total molar weight of 56 x 2 = 112 g/mol
Molar weight of [tex]Fe_2(SO_4)_3[/tex] = 399.88 g/mol
Percentage Fe in [tex]Fe_2(SO_4)_3[/tex] = 112/399.88 x 100%
= 28.01%
The percentage of iron is iron (III) sulphate is, therefore, 28.01 percent.
Worth 40 Points❤ 10th grade chemistry
Answer:
FEGACBDExplanation:
Those are the answers in order, BUT the Goldstein and Rutherford ones are confusing me because Rutherford discovered protons and the nuclear atom. Through my research I also noticed that Goldstein contributed to the discovery of the protons made Rutherford, so I listed him as the one who discovered the proton.
I hope this helps! Have a wonderful night! :D
What is the difference between heat of formation and heat of reaction? Give examples and units
Answer:
The main difference between the heat of formation and heat of reaction is that heat of formation is the amount of energy either absorbed or released during the formation of a compound whereas heat of reaction is the amount of energy either absorbed or released during any chemical reaction.
What is the name of cells that have the ability to develop into different
kinds of cells?
Answer:
stem cells
Explanation:
hope it helps
In a solid, the particles..
A. Vibrate in place
B. Overcome the strong attraction
C. Slide past one another
D. Move freely
An organism can occupy more than one niche in an ecosystem
A) True
B) False
Answer T
Explanation:
Can one mole of peas fit inside your house? List the materials and steps of an experiment that answers the
question without actually filling up your house with peas!
Answer:
No.
Explanation:
No, one mole of peas do not fit inside a house because one mole is equals to 6.022 × 10²³ units which is a very large value. mole only use for atoms, ions and molecules etc due to very small size but mole is not used for big sized materials such as peas and other vegetables etc. So that's why we can conclude that one mole of peas did not fit inside a house.
in 2 hours a bicyclist traveled 75 kilometers. What was the bicyclist's average speed?
Answer:
37.5 miles per hour....
What is true of a gas
Answer:
did you have options, cause if you did chose something alond the lines of
Explanation:
A real gas is a gas that does not behave as an ideal gas due to interactions between gas molecules. A real gas is also known as a nonideal gas because the behavior of a real gas in only approximated by the ideal gas law.
Is the substance in the chart a metal or non metal? Explain.
Answer:
Nonmetal
Explanation:
A substance in the chart is a nonmetal because nonmetals are not water soluble, they are poor conductors of heat and electricity and they do not have high melting points like metals.
Write one equation each for the decomposition reactions where energy is supplied in the form of (a) electricity and
Answer:
Electrolysis of water
Explanation:
The electrolysis of water is a decomposition reaction in which electricity is used to break down a compound into simpler molecules.
Decomposition of water is carried out in the Hofman Voltameter.
This process is achieved by passing current through an acidified water.
The expression is given as:
2H₂O → 2H₂ + O₂
Write the names of the following covalent compounds: no2
Answer:
nitrogen dioxide
Explanation:
this was on my chemistry test
1-calculate the mass of 4 moles of Na
2-what is the mass of 0.3 moles of water H2o H:1 O:16
3-compute the number of moles found in 10g of ethanol C2H5OH C:12 O:16
please help me as fast you can
1. 92 g
2. 5.4 g
3. 0.217 moles
Further explanationThe mole is the number of particles(molecules, atoms, ions) contained in a substance
1 mol = 6.02.10²³ particles
Can be formulated
N=n x No
N = number of particles
n = mol
No = Avogadro's = 6.02.10²³
Moles can also be determined from the amount of substance mass and its molar mass
[tex]\tt n=\dfrac{m}{MW}[/tex]
1. the mass of 4 moles of Na(MW= 23 g/mol)
[tex]\tt mass=mol\times MW\\\\mass=4\times 23\\\\mass=92~g[/tex]
2. the mass of 0.3 moles of water(MW=18 g/mol)
[tex]\tt mass=mol\times MW\\\\mass=0.3\times 18\\\\mass=5.4~g[/tex]
3. the number of moles found in 10g of ethanol C2H5OH(MW=46 g/mol) :
[tex]\tt mol=\dfrac{10}{46}\\\\mol=0.217[/tex]
pls i need #2 !!!!!!!!!!
Answer:
answer c aka it is cheaper than other elements
Answer:
because it's cheap and not hard to purify
Please help me to do this assignment
Answer:
1. Objective
2. Objective
3. Opinion
4. Objective
5. Opinion
6. Opinion
7. Opinion (I think.)
8. Opinion (I think.)
Explanation:
2 points
Al + HCI—_AICI:
+_H2
Synthesis
Decomposition
Single Replacement
Double Replacement
Combustion
The name for the ionic compound CoHPO4
Answer:
Dicalcium phosphate. (I'm sure meant for the "o" to be an "a" for Calcium).
Explanation:
I hope this helps! :D Have a nice night!
A pH of 1 there are a lot of ______ in a solution. 2.A pH of 14 there are a lot of ______ in a solution.
Answer:
Hydrogen or hydroxonium ions in the solution
Hydroxyl ions in the solution
Explanation:
A pH of 1 shows there is a lot of hydroxonium ions in the solution and a pH of 14 shows there is a lot of hydroxyl ions in the solution.
The pH scale ranges from 1 to 14 As the values tends towards 1, the acidity increases due to concentration of hydroxonium ions in the solution. As the pH tends towards 14, the basicity increases due to the concentration of hydrogen ions in the solution.what is solvent and solute
Answer:
Solute=the substance which a solvent dissolve to produce homogeneous mixture
Solvent= the substance in which a solute dissolve to produce homogeneous mixture
Explanation:
solvent: The liquid in which a solute is dissolved to form a solution.
solute: The component in a solution, dissolved in the solvent.
What is the ground-state electron configuration of chlorine and the number of valence electrons in it?
Explanation:
Chlorine is an element in group 7 on the periodic table.
It is the second element in this group of halogens
The element has a total of 17 electrons:
Ground state configuration = 1s² 2s² 2p⁶ 3s² 3p⁵
Valence electrons are the outermost shell electrons;
From the configuration: 3s² 3p⁵ is the valence shell
Number of electrons = 2 + 5 = 7
Explain why, in a balanced chemical equation C + O2 CO2, we know that 1 gram of C will not react exactly with 1 gram of O2.
Answer:
See the answer below
Explanation:
From the equation, 1 mole of C requires 1 mole of O2 for a balanced reaction.
1 g of C will not exactly react with 1 g of O2 because the 1 g of each of the reactants contain different amounts of the substance.
The amount (in moles) of a substance is the mass of that substance divided by the molar mass.
Hence, 1 g of C will contain 1/12 moles of the substance while 1 g of O2 will contain 1/32 moles of the substance.
Given the reaction: 4Al + 302 --> 2AI2O3
How many moles of Aluminum oxide do you have if you have 6 moles of AI?
A
6: moles
B: 2 moles
C: 3 moles
D: 12 moles
Answer:
B: 2 moles
Explanation:
that my answer I got i think its correct
______________- the layers of soil. More mature (older) soils have more of these layers
fill in the blank please
I am not sure why your teacher isn't asking for the layers, but here is the list of layers;
A -(topsoil) Mostly minerals from parent material with organic matter incorporated. A good material for plants and other organisms to live.
E - (eluviated) - Leached of clay, minerals, and organic matter, leaving a concentration of sand and silt particles of quartz or other resistant materials – missing in some soils but often found in older soils and forest soils.
B - (subsoil) Rich in minerals that leached (moved down) from the A or E horizons and accumulated here.
C - (parent material) The deposit at Earth’s surface from which the soil developed.
R - (bedrock) A mass of rock such as granite, basalt, quartzite, limestone or sandstone that forms the parent material for some soils – if the bedrock is close enough to the surface to weather. This is not soil and is located under the C horizon.
What general trend do you observe in the periodic table of the Atomic Radius?
Answer:
Atomic radius Increases in groups from top to bottom and decrease in period from left to right.
Explanation:
two students noted that the acceleration of a car was =40 k/m squared . the fiesta student , "that can't be right . you can't have a negativo acceleration ."second student said , "that can't be right , you can't have seconds squared .
what would you say to each student to help them More better understand how acceleration Is described
PLEASE ANSWER ASAP,FOR MY SCIENCE TEST
Answer:
First one: Yes, It can be negative.
Explanation:
First one: The reason you can have negative acceleration is that acceleration can slow down, or decelerate, causing the negative acceleration.
mass in grams of 3.32 mol k
Answer:
129.8 grams
Explanation:
Im a bit confused of what your are asking but if your are asking the mass in grams of K (Potassium) it is very easy dont worry
You multiply mols x Molecular weight.
So
3.32x 39.1= 129.8 grams
If a 200 kg person stands next to a 100 kg person. Which person would have a larger gravitational attraction?
Answer:
200 kg
Explanation:
the 200 kg person is heavier due to gravity's force the 100 kg person has less force than the other person
Answer:
massive one that is 200kg
Explanation:
Since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force. So as the mass of either object increases, the force of gravitational attraction between them also increases.
Why is it so important to use more than just fossil fuels for our energy sources?
Answer:
Fossil fuels are non-renewable which means that they wont last forever and they contribute largely to unnatural climate change.
Explanation:
halogenation of propane
Answer:
The halogenation of propane discloses an interesting feature of these reactions. All the hydrogens in a complex alkane do not exhibit equal reactivity. For example, propane has eight hydrogens, six of them being structurally equivalent primary, and the other two being secondary