Calculate the following and povide the answer rounded off to the correct accuracy

(8,12-0,9800)g×(3.4501+0,16)ml

Answers

Answer 1

Explanation:

First, let's simplify the expression inside the parentheses:

8.12 - 0.9800 = 7.14 g 3.4501 + 0.16 = 3.6101 ml

Now we can multiply:

7.14 g x 3.6101 ml = 25.775914 g·ml

Rounding off to the correct accuracy (which is the product of the two original values), we get:

25.8 g·ml


Related Questions

The wind blows a lawn chair that weighs 4 kg into a fence with a force of 8 N. How much reaction force does the fence exert on the chair.

A. 2N
B. 0.5 N
C. 0 N
D.8 N

Answers

According to Newton's third law of motion, for every action, there is an equal and opposite reaction. In this case, the action is the force exerted by the lawn chair on the fence, and the reaction is the force exerted by the fence on the lawn chair.

Since the lawn chair weighs 4 kg, its weight is:

weight = mass × gravitational acceleration = 4 kg × 9.81 m/s^2 = 39.24 N

The force exerted on the lawn chair by the wind is 8 N. Since the lawn chair is not accelerating vertically (it is not lifted off the ground), the vertical forces on the lawn chair must be balanced. This means that the force of the fence pushing up on the lawn chair must be equal in magnitude and opposite in direction to the weight of the lawn chair.

Therefore, the reaction force that the fence exerts on the chair is:

reaction force = weight of the chair - force of the wind = 39.24 N - 8 N = 31.24 N

So the correct answer is not given in the options. The closest answer is D. 8 N, which is the force of the wind on the chair, but this is not the reaction force exerted by the fence on the chair.

1
1. ​A neutral atom of an element has 2 electrons in the first energy level, 8 in the second energy level and 8 in the third energy level. This information does not necessarily tell us:
(a) the atomic number of the element.
(b) anything about the element's chemical properties.
(c) the total number of electrons in s orbitals.
(d) the total number of electrons in p orbitals.
(e) the number of neutrons in the nucleus of an atom of the element

Answers

Answer: (e) the number of neutrons in the nucleus of an atom of the element

Explanation: The given information tells us how many electrons the atom has, and since the atom is neutral then the atomic number is the same as the total number of electrons. This rules out answer a. It also tells us that the element has a full set of valence electrons, making it a noble gas and ruling out answer b because noble gasses are known to act differently to other elements. c is ruled out because we are given the number of electrons, allowing us to figure out how many electrons are in s orbitals. The same goes for option d. This leaves option e. e is the correct answer because the number of neutrons in the nucleus of an atom does not affect the number of electrons or the charge of the atom, meaning we have no way of finding it.

The acid-dissociation constant, Ka, for benzoic acid is 6.5 × 10-5. Which will you use to calculate the base-dissociation constant, Kb, for the conjugate base of benzoic acid?

Answers

Therefore, the value we will use to calculate the base-dissociation constant, Kb, for the conjugate base of benzoic acid is 1.54 × 10⁻¹⁰.

What is base-dissociation constant?

The base dissociation constant, Kb, is a measure of the strength of a base in solution. It is the equilibrium constant for the reaction of a base with water to form the conjugate acid and hydroxide ion: B + H2O ⇌ BH+ + OH-. The Kb value is calculated by dividing the equilibrium constant for this reaction by the concentration of the conjugate acid and the concentration of hydroxide ion at equilibrium. Kb = [BH+][OH-] / [B] The Kb value can range from very small values (for weak bases) to very large values (for strong bases). The larger the value of Kb, the stronger the base. The Kb value is related to the acid-dissociation constant, Ka, for the conjugate acid of the base by the following relationship:

Kw = Ka × Kb

The Kb value is an important parameter in acid-base chemistry and is used to predict the degree of base ionization in solution, to calculate pH of basic solutions, and to determine the strength of bases in organic chemistry.

Here,

To calculate the base-dissociation constant, Kb, for the conjugate base of benzoic acid, we need to use the relationship between the acid-dissociation constant, Ka, and the base-dissociation constant, Kb, for a conjugate acid-base pair. The relationship is given by the following equation:

Ka × Kb = Kw

where Kw is the ion product constant for water, which is equal to 1.0 × 10⁻¹⁴ at 25°C.

Since we know the value of Ka for benzoic acid, which is 6.5 × 10^-5, we can use this equation to calculate the value of Kb for the conjugate base of benzoic acid:

Ka × Kb = Kw

Kb = Kw / Ka

Kb = 1.0 × 10⁻¹⁴ / 6.5 × 10⁻⁵

Kb = 1.54 × 10⁻¹⁰

To know more about base-dissociation constant,

https://brainly.com/question/28197409

#SPJ9

Choose the formula for the compound tribromide decaoxide.

Choose the formula for the compound trinitrogen octachloride.


Choose the formula for the compound octaselenium heptaoxide.


Choose the formula for the compound disilicon nonachloride.

Choose the formula for the compound nitrogen monofluoride.

Choose the formula for the compound carbon tetrachloride.







Answers

The formulas for the given compounds are:

Tribromide decaoxide: Br₃O₁₀Trinitrogen octachloride: N₃Cl₈Octaselenium heptaoxide: Se₈O₇Disilicon nonachloride: Si₂Cl₉Nitrogen monofluoride: NFCarbon tetrachloride: CCl₄

What is the formula of a compound?

A chemical formula is a representation of the chemical composition of a substance using symbols for the elements and numerical subscripts to indicate the number of atoms of each element present in a molecule or an ionic compound. It is a shorthand way of describing the identity and ratio of the elements in a substance.

The formula for a compound indicates the type and number of atoms in the simplest unit of the substance.

Learn more about the formula of a compound at: https://brainly.com/question/26388921

#SPJ1

Alcohol is less dense than water. If you measured the mass of the same volume of alcohol and water

Answers

If you measured the mass of the same volume of alcohol and water, alcohol will weigh less than water.

Density and weights

If you measured the mass of the same volume of alcohol and water, you would find that alcohol has a lower mass than water.

This is because alcohol is less dense than water, which means that a given volume of alcohol weighs less than the same volume of water.

For example, if you measure 1 liter of water and 1 liter of alcohol, you will find that the mass of the water is greater than the mass of the alcohol.

This is because water has a higher density than alcohol. The density of water is about 1 gram per cubic centimeter, while the density of alcohol is about 0.79 grams per cubic centimeter. Therefore, the mass of the same volume of alcohol is lower than the mass of water.

More on density can be found here: https://brainly.com/question/29775886

#SPJ1

20 mL of CH4 (g) is burned together with 80 mL of O₂ (g), measured under the same
conditions of temperature and pressure. At the end of the reaction:
CH4 (g) + 2 O₂ (g) → CO₂ (g) + 2 H₂O (g)
What is the percentage composition by volume of the gaseous mixture?
40% CH4.20% CO2.40% H₂O
33% CO2 , 66% H2O
40% O2, 20% CO₂, 40% H₂O
25% CH4,25% O₂, 25% CO2. 25% H₂O
25% CH4 50% O2,25% CO2

Answers

The correct answer is 25% CH4, 50% O2, 12.5% CO2, and 25% H2O by percentage composition.

What is the chemical equation and we assume what?

According to the chemical equation, for every molecule of CH4 burned, we need two molecules of O2. So we can assume that we have 10 mL of CH4 and 40 mL of O2, which will react completely.

Using the ideal gas law, we can find the number of moles of each gas present:

n(CH4) = (0.020 L)(1.00 atm)/(0.0821 L atm/mol K)(298 K) = 0.000964 mol

n(O2) = (0.080 L)(1.00 atm)/(0.0821 L atm/mol K)(298 K) = 0.00386 mol

From the balanced equation, we see that the volume ratio of CH4 to CO2 to H2O is 1:1:2. Therefore:

n(CO2) = n(CH4) = 0.000964 mol

n(H2O) = 2n(CH4) = 0.00193 mol

The total number of moles in the mixture is:

n(total) = n(CH4) + n(O2) + n(CO2) + n(H2O) = 0.000964 + 0.00386 + 0.000964 + 0.00193 = 0.00772 mol

The percentage composition by volume of each gas is equal to the number of moles of the gas divided by the total number of moles, multiplied by 100%:

% CH4 = (0.000964 mol/0.00772 mol) x 100% = 12.5%

% O2 = (0.00386 mol/0.00772 mol) x 100% = 50%

% CO2 = (0.000964 mol/0.00772 mol) x 100% = 12.5%

% H2O = (0.00193 mol/0.00772 mol) x 100% = 25%

To know more about chemical equation visit:-

brainly.com/question/30087623

#SPJ1

I want to make a precipitate from C4 H6 O4Sr and K3 PO4. Is this possible and if so, how do I do this?

Answers

Yes, it is possible to make a precipitate from C4H6O4Sr and K3PO4. The precipitate will be strontium phosphate.

To make the precipitate, you will need to mix solutions of the two compounds together. The easiest way to do this is to dissolve each compound in water separately, and then mix the solutions together.

Here are the steps to follow:

1. Dissolve 1 mole of C4H6O4Sr in 1 liter of water. This will result in a 1 M solution of C4H6O4Sr.

2. Dissolve 1 mole of K3PO4 in 1 liter of water. This will result in a 1 M solution of K3PO4.

3. Mix the two solutions together in a container that will allow you to observe the formation of the precipitate.

4. You should begin to see the formation of a white, cloudy precipitate as the two solutions mix. This is the strontium phosphate.

5. Mix the contents of the container thoroughly and allow it to sit for several minutes to ensure that the reaction is complete.

6. You can then separate the precipitate from the remaining solution using any method that works for you, such as filtration or centrifugation.

You have 2 sets of elements:
Set 1: fluorine, chlorine, and bromine (F, Cl, & Br)
Set 2: nitrogen, oxygen, and fluorine (N, O, & F)
Which of these two sets would you expect to be more similar in terms of properties? Explain why.

Answers

"Set 2 (N, O, & F) would be more similar in terms of properties.

This is because elements in the same group (column) of the periodic table generally have similar properties due to their similar electron configurations. Fluorine (F) is in Group 17 (the halogens) of the periodic table, and chlorine (Cl) and bromine (Br) are also halogens, which means they have similar properties such as being highly reactive and forming acidic compounds.

Nitrogen (N), oxygen (O), and fluorine (F) are all located in Group 16 (the chalcogens) and Group 17 (the halogens) of the periodic table, respectively. While nitrogen is not a halogen, it is located just above Group 17, and oxygen and fluorine are halogens. Elements in Group 16 and 17 share similar chemical properties such as high electronegativity and the tendency to form covalent bonds.

Therefore, because elements in the same group of the periodic table have similar properties, we would expect Set 2 to be more similar in terms of properties than Set 1. Specifically, nitrogen, oxygen, and fluorine are all nonmetals with relatively high electronegativities and the ability to form strong covalent bonds, which makes them more similar to each other than to the halogens in Set 1" (ChatGPT, 2023)

I need help with each one can you please show work

Answers

Answer:

1.  0.121 moles

2.  46.9 liters

3. 12.3 atm

4. 253 K

5. 0.552 g/L.

6.  22.8 g/mol.

7.  0.0494 moles

8. 5370 liters

9. 34.5 grams

10. helium

Explanation:

1. Using the ideal gas law equation, we can solve for the number of moles of oxygen:

PV = nRT

n = PV/RT

n = (1.2 atm) * (2.5 L) / [(0.0821 L atm/mol⚫K) * (298 K)]

n = 0.121 moles of oxygen

Therefore, 0.121 moles of oxygen will occupy a volume of 2.5 liters at 1.2 atm and 25°C.

2. Using the ideal gas law equation, we can solve for the volume of nitrogen:

PV = nRT

V = nRT/P

V = (2.0 moles) * (0.0821 L atm/mol⚫K) * (293 K) / (720 Torr)

V = 46.9 L

Therefore, 2.0 moles of nitrogen will occupy a volume of 46.9 liters at 720 Torr and 20°C.

3. Using the ideal gas law equation, we can solve for the pressure of CO:

PV = nRT

P = nRT/V

n = (25 g) / (28.01 g/mol) = 0.892 mol

P = (0.892 mol) * (0.0821 L atm/mol⚫K) * (298 K) / (0.5 L)

P = 12.3 atm

Therefore, 25 g of CO will exert a pressure of 12.3 atm at a temperature of 25°C and a volume of 500 mL.

4. Using the ideal gas law equation, we can solve for the temperature of Cl:

PV = nRT

T = PV/nR

n = (5.00 g) / (35.45 g/mol) = 0.141 mol

T = (900. Torr) * (0.750 L) / (0.141 mol) / (0.0821 L atm/mol⚫K)

T = 253 K

5. Therefore, 5.00 g of Cl will exert a pressure of 900. Torr at a volume of 750 mL at a temperature of 253 K.

Using the ideal gas law equation, we can solve for the density of NH3:

PV = nRT

n/V = P/RT

n/V = (800 Torr) / [(0.0821 L atm/mol⚫K) * (298 K)]

n/V = 0.0324 mol/L

The molar mass of NH3 is 17.03 g/mol, so the density of NH3 is:

density = (0.0324 mol/L) * (17.03 g/mol) = 0.552 g/L

Therefore, the density of NH3 at 800 Torr and 25°C is 0.552 g/L.

6. We can use the ideal gas law to calculate the number of moles of the gas and then divide the mass of the gas by the number of moles to get the molecular mass.

PV = nRT

n = PV/RT

n = (1.2 g/L) / [(0.0821 L atm/mol⚫K) * (293 K) * (745. Torr / 760 Torr)]

n = 0.0526 mol

The mass of the gas is 1.2 g, so the molecular mass is:

molecular mass = 1.2 g / 0.0526 mol = 22.8 g/mol

Therefore, the molecular mass of the gas is 22.8 g/mol.

7. Using the ideal gas law equation, we can solve for the number of moles of nitrogen gas:

PV = nRT

n = PV/RT

n = (6680 Torr) * (0.347 L) / [(0.0821 L atm/mol⚫K) * (300 K)]

n = 0.0494 moles of nitrogen gas

Therefore, 0.0494 moles of nitrogen gas will occupy a volume of 347 mL at 6680 Torr and 27°C.

8. We can use the ideal gas law to calculate the volume of hydrogen:

PV = nRT

V = nRT/P

n = (454 g) / (2.016 g/mol) = 225 mol

V = (225 mol) * (0.0821 L atm/mol⚫K) * (298 K) / (1.05 atm)

V = 5370 L

Therefore, 454 grams (1 lb.) of hydrogen will occupy a volume of 5370 liters at 1.05 atm and 25°C.

9. Using the ideal gas law equation, we can solve for the number of moles of CO:

PV = nRT

n = PV/RT

n = (785 Torr) * (32.5 L) / [(0.0821 L atm/mol⚫K) * (305 K)]

n = 1.23 moles of CO

The molar mass of CO is 28.01 g/mol, so the mass of CO is:

mass = (1.23 moles) * (28.01 g/mol) = 34.5 g

10. Therefore, 34.5 grams of CO will exert a pressure of 785 Torr at a volume of 32.5 L and a temperature of 32°C.

Using the ideal gas law equation, we can solve for the identity of the gas:

PV = nRT

n = PV/RT

n = (758 Torr) * (58.4 L) / [(0.0821 L atm/mol⚫K) * (275.5 K)]

n = 2.93 moles of gas

The mass of the gas is 10.3 g, so the molecular mass is:

molecular mass = 10.3 g / 2.93 mol = 3.52 g/mol

Looking at the periodic table, we see that the only element with a molecular mass close to 3.52 g/mol is helium, which has a molecular mass of 4.00 g/mol. Therefore, the gas is likely helium.

Zn + 2HCl → ZnCl2 + H2



How many moles of hydrogen are produced from the reaction of 2.3 moles of zinc?

Answers

Answer:

3 moles

Explanation:

Based on the balanced chemical equation, 1 mole of H2 is formed when 1 mole of Zn reacts with excess HCl. As such, 3 moles of H2 are formed when 3 moles of Zn react with excess HCl.

How many grams are there in 6 moles of water??

Answers

Answer:108.06 grams

Explanation: the first step is to use unit conversions. Multiply the given number of moles by the molar mass of water which is 15.99 grams of oxygen plus 2.02 grams for two hydrogen that will turn it into grams and that will give you your total number of grams.

calculate the number molecules of water present in a snowball that weighs 360 grams

Answers

360 g of water is equal to 1.20441025 molecules and 20 moles.[tex]1.2 * 10^2^4[/tex]molecules make up 36g of water.

How do you measure 250ml of water?

8.45 fluid ounces, or just over 1 cup, of water are equal to 250 millilitres of water. This is because 250 millilitres would be little more than 1 cup as 1 cup is approximately 236 millilitres.

How are water molecules calculated?

We may determine the atomic weights of the elements using their periodic tables, and we discover that hydrogen has an atomic weight of 1, while that of oxygen is 16. We sum the contributions from each atom to determine the molecular weight of one water molecule, which is 2(1) + 1(16) = 18 grams/mole.

To know more about molecules visit:-

brainly.com/question/21263612

#SPJ1

Neurological differences in singing
alone or with others
Alone on the left, and with others on the right. Welsh, 2015.
Which of the following conclusions can be drawn from the brain scan images?
SOBRE
Singing alone is less fun than singing with others.
Singing with others activates more regions of the brain.
Singing alone activates more regions of the brain.
Singing alone is a requirement of singing with others.
Which of the following is evident in the brain scans?
0000
There is no difference in brain activity when singing alone or singing with others.
Singing with others is an important task.
Singing alone and singing with others activate different parts of the brain.
Loud music activates the most parts of the brain.?

Answers

1) Singing alone is less fun than singing with others

2) Loud music activates the most parts of the brain

Can a brain scan during singing show important information?

Brain scans during singing can provide important information about the neural processes involved in music and vocalization.

Brain scans during singing can help researchers understand how these different brain regions interact and coordinate during vocalization. For example, studies have shown that professional singers have greater activation in the motor cortex and auditory cortex compared to non-singers, suggesting that extensive training can lead to changes in the brain's neural circuits.

Learn more about brain scan:https://brainly.com/question/29439731

#SPJ1

How many atoms of oxygen are present in 200.0 g of CaCO3 ?

Answers

Explanation:

firstly we find the mole of CaCO3 . Now, in CaCO3 1 mol CaCO3 contains 3 mol O . Hence, 36.138*10^23 atoms of oxygen are present in 200 g of caco3.

The identity of an unknown monoprotic organic acid is determined by titration. A 0.148 g sample of the acid is titrated with 0.159 M NaOH. What is the molar mass of the compound if 12.6 mL of the NaOH solution is required to neutralize the sample?

Answers

The molar mass of the unknown compound in 12.6 mL of NaOH solution is 74 g/mol.

First, we need to find the number of moles of NaOH used in titration

moles of NaOH = concentration x volume in liters

moles of NaOH = 0.159 mol/L x (12.6/1000) L

moles of NaOH = 0.0020014 mol

Since the acid is monoprotic, the number of moles of the acid is also 0.0020014 mol.

Now let us calculate its molar mass

molar mass = mass / moles

molar mass = 0.148 g / 0.0020014 mol

molar mass = 73.9 g/mol

Therefore, the molar mass of the unknown monoprotic organic acid is 73.9 g/mol.

To learn more about, molar mass of an unknown compound

https://brainly.com/question/10544148

Final answer:

To determine the molar mass of the unknown monoprotic organic acid, we need to use the information provided. We are given that 0.148 g of the acid is titrated with 0.159 M NaOH and it takes 12.6 mL of the NaOH solution to neutralize the sample. The molar mass of the compound is approximately 73.8 g/mol.

Explanation:

To determine the molar mass of the unknown monoprotic organic acid, we need to use the information provided. We are given that 0.148 g of the acid is titrated with 0.159 M NaOH and it takes 12.6 mL of the NaOH solution to neutralize the sample. First, we need to calculate the moles of NaOH used by multiplying its molarity by its volume in liters:

Moles of NaOH = concentration * volume = 0.159 M * 0.0126 L = 0.0020046 moles

Since the acid is monoprotic (meaning it donates only one hydrogen ion), the number of moles of the acid is equal to the number of moles of NaOH used. Now, we can calculate the molar mass of the acid by dividing the mass of the acid by the moles:

Molar mass of acid = mass of acid / moles of acid = 0.148 g / 0.0020046 moles ≈ 73.8 g/mol

Learn more about Determining molar mass of an unknown organic acid here:

https://brainly.com/question/33445730

#SPJ2

What is occurring in section D?

heating curve phase changes

A. Particles of a gas are condensing into a solid.
B. Temperature of a gas is decreasing.
C. Temperature of a liquid is rising.
D. Particles of a gas are condensing into a liquid

Answers

Answer:

B. Temperature of a gas is decreasing.

C. Temperature of a liquid is rising.

D. Particles of a gas are condensing into a liquid

Explanation:

Simply, the diagram shows physical changes of a substance.

- Region A: we see the substance is very compacted with very closely attached molecules which characterizes solids.

Transition A—C (Region B):

[tex]{ \red{ \dashrightarrow{ \rm{ \: melting}}}} \\ { \blue{ \dashleftarrow{ \rm{ freezing}}}}[/tex]

From A to C, a solid is changing to liquid state by melting down and the reverse process is freezing.

Melting may be cause by increasing pressure and increasing the temperature of the substance. And freezing is the opposite.

- Region C: We see the substance has molecule further apart than in A. This characterizes liquid feature.

Transition C—E (Region D):

[tex]{ \red{ \dashrightarrow{ \rm{ \: evaporation}}}} \: \\ { \blue{ \dashleftarrow{ \rm{ condensation}}}}[/tex]

From C to E, liquid is changing to gaseous state by evaporation down and the reverse process is condensation. Evaporation occurs due to increase in pressure and temperature of the liquid, and condensation is the opposite.

- Region D

The molecules are furthest apart. This characterizes gaseous feature.

Note that also E can change to A and vice versa directly by sublimation.

What is The oxidation half reaction for F^- + CLO3^- ==> F2 + CL^-

Reactants -> Products

Answers

The oxidation half reaction is;

2F^-(aq) ----> F2 (g) + 2e. This is an oxidation because there is the loss of two electrons.

What is oxidation half reaction?

An oxidation half-reaction is a chemical reaction that involves the loss of electrons by an atom, ion, or molecule. In other words, it is a reaction where a substance undergoes oxidation by losing one or more electrons.

We can see that in the oxidation half equation that have been shown there can be seen to be the loos of about two electrons in the half equation;

2F^-(aq) ----> F2 (g) + 2e

Hence, this is the oxidation half equation.

Learn more about half reaction:https://brainly.com/question/10668307

#SPJ1

A room temperature 0.213 M solution of an unknown monoprotic acid has a pH of 1.862. What is the percent ionization of that unknown acid?

Answers

The percent ionization of the unknown monoprotic acid is 7.51%.

What is Room Temperature?

Room temperature is a range of temperatures that is comfortable for humans to be in for extended periods of time, typically between 20-25 degrees Celsius (68-77 degrees Fahrenheit). However, the definition of room temperature can vary depending on cultural and regional norms, as well as the specific application. In scientific contexts, room temperature is often defined more precisely, for example as 20-22 degrees Celsius (68-72 degrees Fahrenheit) in laboratory settings.

The percent ionization of an acid is defined as the ratio of the concentration of ionized acid (H+) to the initial concentration of the acid (HA) multiplied by 100%.

% Ionization = [H+]/[HA] x 100%

The concentration of H+ in a solution can be calculated from the pH using the formula:

pH = -log[H+]

Rearranging this equation gives:

[H+] = 10^(-pH)

Substituting the given values of pH = 1.862 and the initial concentration of the acid [HA] = 0.213 M into these equations, we get:

[H+] = 10^(-1.862) = 0.016 M

% Ionization = [H+]/[HA] x 100% = (0.016 M/0.213 M) x 100% = 7.51%

Therefore, the percent ionization of the unknown monoprotic acid is 7.51%.

Learn more about Room Temperature from given link

https://brainly.com/question/17410084

#SPJ1


4.16 g of element W reacts with 1.92 g of oxygen to form metal oxide W. The
empirical formula for this metal oxide is W203. What is the relative atomic mass of
W?
[Relative atomic mass : 0 = 16]

A 27
B 52
C 56
D 104

Answers

Answer:
52 grams (B)


Explanation:


Given: 4.16 grams of W
           1.92 grams of O2

The reaction:
2W + 1.5 O2 ----> W2O3

We are gonna calculate the molar mass of W with ratios
So, to calculate that, we will multiply the moles by molar masses (O2: 1.5 * 32 & W: 2x) and divide the over the given masses and equating both fractions:

[tex]\frac{2x}{4.16} = \frac{1.5*32}{1.92}[/tex]

[tex]x = \frac{1.5*32*4.16}{2*1.92} = 52 grams[/tex]

Liquid octane CH3CH26CH3 reacts with gaseous oxygen gas O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. If 29.2g of carbon dioxide is produced from the reaction of 20.6g of octane and 98.6g of oxygen gas, calculate the percent yield of carbon dioxide. Round your answer to 3 significant figures.

Answers

Now, we can calculate the percent yield of carbon dioxide using the following equation Percent yield of CO2 = 61.5% .

What is carbon dioxide?

Carbon dioxide (CO2) is a colorless, odorless gas composed of one carbon atom and two oxygen atoms. It exists in the Earth's atmosphere as a trace gas, making up approximately 0.04% of the atmosphere by volume. In nature, it is produced by the respiration of living organisms and through the decay of organic matter. It is also a byproduct of many human activities such as burning fossil fuels, producing cement, and manufacturing plastic. Carbon dioxide is an important greenhouse gas, which means it absorbs and traps heat in the atmosphere, resulting in global warming.

The given reaction is:

CH3CH2CH3 + O2 → CO2 + H2O

Given:

m(octane) = 20.6 g

m(O2) = 98.6 g

m(CO2) = 29.2 g

Using the given information and the balanced equation, we can determine the theoretical yield of carbon dioxide by using the following equation:

m(CO2) (theoretical) = (m(octane) × molar mass of octane) / molar mass of CO2

m(CO2) (theoretical) = (20.6 g × 72 g/mol) / 44 g/mol

m(CO2) (theoretical) = 47.45 g

To learn more about carbon dioxide

https://brainly.com/question/30192582

#SPJ9

how much ice can be melted with 560 joules of heat?

Answers

The amount of ice that can be melted by a given amount of heat depends on several factors, such as the mass of the ice, the specific heat capacity of ice, and the heat of fusion of ice (the amount of heat required to melt a given mass of ice at its melting point).

Assuming that the ice is at its melting point (0°C or 32°F) and that the heat is used solely to melt the ice (not to raise its temperature), we can use the heat of fusion of ice and the equation:

Q = m * L

where Q is the heat required to melt the ice, m is the mass of the ice, and L is the heat of fusion of ice (334 J/g).

To find the mass of ice that can be melted with 560 J of heat, we can rearrange the equation to solve for m:

m = Q / L

m = 560 J / 334 J/g

m = 1.67 g

Therefore, 560 joules of heat can melt 1.67 grams of ice at its melting point.

Answer:

The amount of ice that can be melted with a certain amount of heat depends on several factors such as the mass of the ice, the initial temperature of the ice, and the specific heat capacity of ice.

However, assuming we are dealing with a certain amount of ice with a specific mass and initial temperature, we can use the following formula:

Q = m × Lf

where Q is the amount of heat required to melt the ice, m is the mass of the ice, and Lf is the heat of fusion of ice, which is equal to 334 joules/gram.

To find the amount of ice that can be melted with 560 joules of heat, we need to rearrange the formula as:

m = Q ÷ Lf

Plugging in the values, we get:

m = 560 J ÷ 334 J/g ≈ 1.67 g

Therefore, 560 joules of heat can melt approximately 1.67 grams of ice.

Which of the following is true for the quantum mechanical atomic model?

A. Atoms absorb or emit electrons from the nucleus when they interact with electromagnetic radiation.

B. Every atom absorbs all wavelengths of light energy or electromagnetic radiation.

C. Electrons give off electromagnetic radiation when they jump from a high to a low energy level.

D. Electrons are perfectly evenly distributed throughout the atom.​​

Answers

Answer: C. Electrons give off electromagnetic radiation when they jump from a high to a low energy level.

Explanation:

 Electrons give off electromagnetic radiation when they jump from a high to a low energy level in the quantum mechanical atomic model. This is known as the emission spectrum of an atom, and each element has its unique emission spectrum. This phenomenon was explained by the Bohr model of the atom and is a fundamental concept of the quantum mechanical atomic model.

 Option A is incorrect because atoms cannot absorb or emit electrons from the nucleus when they interact with electromagnetic radiation. Option B is also incorrect because atoms only absorb certain wavelengths of light energy or electromagnetic radiation, which corresponds to the energy difference between electron energy levels. Option D is incorrect because electrons are not evenly distributed throughout the atom in the quantum mechanical atomic model; instead, they occupy specific energy levels or orbitals.

If you combine 440.0 mL of water at 25.00 ∘C and 130.0 mL of water at 95.00 ∘C, what is the final temperature of the mixture? Use 1.00 g/mL as the density of water.

final= ∘C

Answers

The final temperature of the mixture is 41.9.  Mass has an impact on how much heat it can receive.

How to calculate final temperature?

The mean of the two temperatures is referred to as the ultimate temperature when a mixture contains the same substance with the same mass. The quantity of heat necessary to raise the temperature of one gramme of a substance by one degree is known as a substance's specific heat.

The final heat of your substance can be calculated by adding the temperature difference to the starting point. Keep in mind that each object's mass.

mass has an impact on how much heat it can receive.

q = mCT

440 - 11,000 = 13,300 - 140 final temperature

580 = 24,300

final temperature = 41.9 C

To know more about temperature, visit-

https://brainly.com/question/15267055

#SPJ1

Balance each of the following equations by writing the correct coefficient on the line.
A blank line = 1 or you can put in the 1 that is fine.

look at photo for reference

Answers

All I know about here..

How do you balance an equation with a coefficient?

Steps in Balancing a Chemical Equation

Count each type of atom in reactants and products. ...

Place coefficients, as needed, in front of the symbols or formulas to increase the number of atoms or molecules of the substances. ...

Repeat steps 1 and 2 until the equation is balanced.

Explain how matter relates to life

Answers

Answer:

matter are anything that has space

You complete an experiment measuring the spread of the Cordyceps fungus across a forest environment. You measure the amount of growths you observe on the ground in a 1 acre area. After evaluating your experiment, you find that fungus frequently grows long fibers underground and only sprout reproductive parts above ground. How might this affect your data and/or conclusion?

Answers

The experiment's initial result was incorrect since the statistics do not account for subsurface growth, which may have expanded over a greater area.

What is a straightforward experiment?

Researchers frequently employ a straightforward experiment to establish cause-and-effect, or to ascertain if modifications to one factor might result in changes in another one.

What experiments carry out chemists?

At the molecular and atomic levels, chemists examine the properties of materials. They quantify amounts and reaction rates in hopes of understanding unfamiliar compounds and how they function. When creating new chemicals for application in a variety of real-world situations, they may additionally measure these parameters.

To know more about experiment's visit:

https://brainly.com/question/30055326

#SPJ1

Write the acidic equilibrium equation for C₃H₇COOH. Be sure to include the proper phases for all species within the reaction.

Answers

Propionic acid, C3H7COOH, has an equation for its acidic equilibrium that looks like this: C₃H₇COOH (aq) + H₂O (l) ⇌ C₃H₇COO⁻ (aq) + H₃O⁺ (aq).

Which three equilibrium equations are there?

A system must satisfy the three equations of equilibrium, Sum Fx = 0, Sum Fy = 0, and Sum M = 0, in order to be in equilibrium. Start with the equations for the sum of the forces. Dividing the diagonal forces into their component parts would be the most straightforward technique to solve these force systems.

What is an illustration of a reaction in equilibrium?

The chemical reaction between the reactants both before and after the reaction is complete is referred to as an equilibrium reaction (i.e., a thermodynamic equilibrium state). The evaporation of water into vapor is an illustration of an equilibrium reaction.

to know more about equilibrium equation here;

brainly.com/question/11028945

#SPJ1

Provide the equation for the hydrolysis of propyl propanoate. Provide the equation for the hydrolysis N, N-dimethyl propanamide.

IF POSSIBLE MUST BE DONE ASAP.

Answers

Answer:

The hydrolysis reaction of propyl propanoate is as follows:

Propyl propanoate + Water → Propanoic acid + Propanol

The balanced chemical equation for this reaction is:

CH3CH2COOCH2CH2CH3 + H2O → CH3CH2COOH + CH3CH2CH2OH

The hydrolysis reaction of N, N-dimethyl propanamide is as follows:

N, N-dimethyl propanamide + Water → Propanoic acid + Dimethylamine

The balanced chemical equation for this reaction is:

CH3CH2CON(CH3)2 + H2O → CH3CH2COOH + (CH3)2NH

Which of the following represents the greatest pressure?

O 0.625 atm

O 755 mmHg

O 15.10 PSI

O 90,250 Pa

Answers

The highest pressure, or 1.04 atm, or 15.10 PSI, is present.

What pressure level in Pa is high pressure?

High pressure is often characterized by a barometer measurement of over 30.20 inHg and is linked to calm, clear skies. Above 30.20 inHg (102268.9 Pa or 1022.689 mb) indicates rising or stable pressure, which indicates continuous pleasant weather. Fair weather is a sign of slowly decreasing pressure.

0.625 atm

755 mmHg = 1 atm (by definition)

15.10 PSI = 1.04 atm (1 PSI = 0.068 atm)

90,250 Pa = 0.89 atm (1 Pa = 9.87x10^-6 atm)

Therefore, the greatest pressure is 1.04 atm, which corresponds to 15.10 PSI.

To know more about pressure visit:-

https://brainly.com/question/2773779

#SPJ1

Strong acids and bases have minimal effects on pH, while weak acids and bases can have a large impact on pH.
True or False

Answers

Stronger acids have lower pH values than weaker acids because they have more ions in solution. As a result, the statement "A strong acid solution always has a lower pH than a mild acid solution" is accurate.

Can a weak acid's pH ever be lower than a strong acid's?

A weak acid should have a pH of less than 7 (not neutral), and its pH is often lower than that of a strong acid. Note that there are a few.

Does the pH of strong bases change?

Strong bases and strong acids do not hydrolyze the salts they produce. The pH will stay at 7 and be neutral.

To know more about strong acid visit:-

brainly.com/question/16749233

#SPJ1

Other Questions
"The fatal poison of irresponsible power was already in her hands,and soon commenced its infernal work."Which choice BEST describes what role this sentence servesin the paragraph? PLATO Assignment!30 points!Language Learning OpportunitiesOne of the best ways to put language learning to practice is to spend time in the countries where the language is spoken. You could join a travel program, participate in a student exchange, or sign up for volunteer work abroad. There are many programs available to middle and high school students (over the summer or during the year) and to gap year students (the year after high school and before college). Research travel, adventure, exchange, and/or volunteer abroad programs that take students your age to countries where Spanish is spoken.Write one paragraph in ENGLISH summarizing a program that appeals to you. Your paragraph should include 8-10 sentences and respond to the following questions:-What is the name of the program?-In which Spanish-speaking country is the program located?-What are the requirements to participate in the program?-What interests you about the program?-Remember to include a link to the program you choose.Please put an answer YOU would put. I need some ideas that could help me with this assignment. Thank you! the area of base of a cylindrical tank is 38.5m. Find the perimeter of base Should medical services in the U.S. be free? This is not your opinion- please justify your answer.A market system rations goods and services based on prices. A price system costs relatively small to operate, is usually self-correcting (e.g., prices fall when supply exceeds demand, restoring balance), and allows individuals with different wants to make different choices. This is a significant advantage. The problem is that markets limit the choices of some consumers. Consequently, even with a fair market process, the market outcome may seem unfair. Wealthy societies typically view the exclusion of some consumers from valuable medical services, perhaps because of low income or perhaps because of previous catastrophic medical expenses, as unacceptable.A market-based system is not the only system that is affected by demand. According to demand theory, if care is not rationed by price, it will be rationed by other means, such as waiting times, which are often inconvenient for consumers. Moreover, careful analyses of consumer use of services have convinced most analysts that medical goods and services should not be free. Consumers would use care until it no longer added value to their lives if it were truly cost-free. The majority of nations today have public and private health insurance plans that reflect this understanding. There is no such thing as free care. Someone has to pay, somehow. Providing healthcare in the modern era requires highly trained professionals, sophisticated equipment, and specialized supplies. Even resources for which there is no charge represent a cost to someone. Suppose that your estimates of the possible one-year returns from investing in the common stock of the A. A. Eye-Eye Corporation were as follows: Return Probability -10% 0.1 -5% 0.2 0% 0.3 5% 0.4 What is the probability to get a profit more than 7%? Find the measurements of the numbered angles of this circle Describe the Police Act 1967. A charged cloud system produces an electric field in the air near the earth surface. When a particle (q=-2. 0x10^-9) is acted on by a downward electrostatic force of 3. 0x10^-6 N when placed in this field, determine the magnitude of the electric field Demonstrate and explain how to evaluate the derivative for each of the following definite integrals using the fundamental theorem of calculus. ?A)d/xd 4x(2(6cos(t)+7) 4)dtB)d/xd x3(4sin(t 33))dt 5 sentence paragraph about ethical decision Banks and Credit Unions. (choose all that apply)A. . Are very similar. They offer the same products and services. What makes them different is the way in which they are legally organized. B. . Have similar interest rates. However, credit unions often have higher savings rates (better) and lower loan rates (better) than banks. C. . Are different because credit unions cannot issue ATM and credit cards, making it inconvenient to access your funds. D. . Are very different. Most people cannot join a credit union Write a congruence statement for the triangles o.ooo27 in scientific notation ? Indicate two ways that show the importance of finding a balance between personal freedom and responsibile social behaviour a list of prospects regularly contacted by an agent in the hopes of making them clients is called a: group of answer choices harassment suit waiting to happen. family tree. circle of last resort. sphere of influence. Explain why you cannot invest in every innovative technology introduced in the market? Determine the molar mass of a gas if the volume of 0. 05 g of the gas is 50cc at 27c and 76cm Hg pressure If the exponential model f(x)=8(9)x is written with the base e, it will take the form A0ekx. What is A0 and what is k? Note: This is actually supposed to be in psychics.(Best Answer Gets Brainliest And Also NO ASKING FOR BRAINLIEST I will give it to the best answer Okay?) Imagine that you ran some jeans through a dryer and they became positively charged. How would you draw field lines around the jeans? Challenge) Solve for a. Answer as a mixed number. A=______