Answer:
[tex]\Delta S=6045.8\frac{J}{K}[/tex]
Explanation:
Hello,
In this case, we can compute the change in the entropy for vaporization processes in term of the enthalpy of vaporization as shown below:
[tex]\Delta S=\frac{m*\Delta H}{T}[/tex]
Whereas the temperature is in Kelvins. In such a way, the entropy results:
[tex]\Delta S=\frac{1.00kg*2256x10^3\frac{J}{kg} }{(100+273.15)K}\\\\\Delta S=6045.8\frac{J}{K}[/tex]
Best regards.
Resources Use the exothermic and endothermic interactive to classify the solution process for each solute. Exothermic solution process Endothermic solution process
KOH CaCl, NaCT NaOH NaNO, NH NO,
Answer:
Exothermic interractive are the following: NaOH, KOH, CaCl₂
Endothermic interactive are the following: NaCl, NH₄NO₃, NaNO₃
Explanation:
NaOH, KOH, and CaCl2 are exothermic reactants. NaCl, NH4NO3, and NaNO3 are endothermic interacting substances.
Endothermic reactions: what are they?Chemical processes that can release or absorb energy are referred to as endothermic. In endothermic reactions, more energy is used when bonds in the reactants are broken than is released when new bonds are formed in the products.
How do endothermic processes take place?When the temperature of the an isolated system drops while the surroundings of the a non-isolated system warm up, this is known as an endothermic response. The heat of reaction is generally positive in endothermic processes (qrxn>0).
To know more about endothermic reactions visit:
https://brainly.com/question/23184814
#SPJ2
A 3.00-g sample of an alloy (containing only Pb and Sn) was dissolved in nitric acid (HNO3). Sulfuric acid was added to this solution, which precipitated 2.93 g of PbSO4. Assuming that all of the lead was precipitated, what is the percentage of Sn in the sample? (molar mass of PbSO4 = 303.3 g/mol)
Answer:
33.3% of Sn in the sample
Explanation:
The addition of SO₄⁻ ions produce the selective precipitation of Pb²⁺ to produce PbSO₄.
Moles of PbSO₄ (molar mass 303.26g/mol) in 2.93g are:
2.93g ₓ (1mol / 303.26) = 9.66x10⁻³ moles PbSO₄ = Moles Pb²⁺.
As molar mass of Pb is 207.2g/mol, mass in 9.66x10⁻³ moles of Pb²⁺ is:
9.66x10⁻³ moles of Pb²⁺ ₓ (207.2g / mol) = 2.00g of Pb²⁺
As mass of the sample is 3.00g, mass of Sn²⁺ is 3.00g - 2.00g = 1.00g
And the percentage of Sn in the sample is:
1.00g / 3.00g ₓ 100 =
33.3% of Sn in the sampleDraw structural formulas for the major organic product(s) of the reaction shown below.
• You do not have to consider stereochemistry.
If no reaction occurs, draw the organic starting material.
Remember to include all of the formal charges on the atoms of any nitro groups.
Answer:
3-bromobenzoic acid
Explanation:
In this case, we have to remember that the [tex]Br_2/FeBr_3[/tex] is a reaction in which we add Br into the molecule an electrophilic aromatic substitution. Additionally, we have a carboxylic acid in the benzene. This carboxylic acid is an ortho director because is a deactivating group (it removes electrons from the benzene ring). With this in mind, a "Br" atom would be added in an ortho position respect to the COOH group and we will obtain 3-bromobenzoic acid.
See figure 1.
I hope it helps!
To create 3-bromobenzoic acid, a "Br" atom would be placed at an orthogonal position to the COOH group according to electrophilic aromatic substitution.
Electrophilic aromatic substitution is a type of organic reaction in which an atom or group in an aromatic ring is substituted with an electrophile. It is a fundamental reaction in aromatic chemistry that happens due to the aromatic system's high electron density.
It is an electrophilic aromatic substitution process in which Br is incorporated into the molecule. In addition, the benzene contains a carboxylic acid. Because it removes electrons from the benzene ring, this carboxylic acid functions as an ortho director. To create 3-bromobenzoic acid, a "Br" atom would be placed at an orthogonal position to the COOH group. The product is seen in the photographs below.
To know more about electrophilic aromatic substitution, here:
https://brainly.com/question/30761476
#SPJ6
What is the [OH-] of a solution prepared by dissolving 0.0912 g of hydrogen chloride in sufficient pure water to prepare 250.0 ml of solution
Answer: The [tex][OH^-][/tex] of a solution is [tex]10^{-12}[/tex] M
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in ml
moles of [tex]HCl[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{0.0912g}{36.5g/mol}=0.0025mol[/tex]
Now put all the given values in the formula of molality, we get
[tex]Molarity=\frac{0.0025\times 1000}{250}=0.01[/tex]
pH or pOH is the measure of acidity or alkalinity of a solution.
[tex]HCl\rightarrow H^++Cl^{-}[/tex]
According to stoichiometry,
1 mole of [tex]HCl[/tex] gives 1 mole of [tex]H^+[/tex]
Thus [tex]0.01[/tex] moles of [tex]HCl[/tex] gives =[tex]\frac{1}{1}\times 0.01=0.01[/tex] moles of [tex]H^+[/tex]
Putting in the values:
[tex][H^+][OH^-]=10^{-14}[/tex]
[tex][0.01][OH^-]=10^{-14}[/tex]
[tex][OH^-]=10^{-12}[/tex]
Thus the [tex][OH^-][/tex] of a solution prepared by dissolving 0.0912 g of hydrogen chloride in sufficient pure water to prepare 250.0 ml of solution is [tex]10^{-12}[/tex] M
The [OH-] of a solution is [tex]10^{12}[/tex] M.
What is Molarity?Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
M = n/ V..................(1)
where,
n = moles of solute
V = volume of solution in ml
Calculation for number of moles:
Moles of HCl = 0.0912 g/ 36.5 g/mol = 0.0025 mol
On substituting the values in equation 1:
M = n/ V
M= 0.0025*1000 / 250
M=0.01 M
pH or pOH is the measure of acidity or alkalinity of a solution.
[tex]HCl---- > H^++Cl^-[/tex]
According to stoichiometry,
1 mole of HCl gives 1 mole of [tex]H^+[/tex]
Thus, 0.01 moles of HCl gives = 1 / 1 *0.01 = 0.01 mole of [tex]H^+[/tex]
On adding the values:
[tex][H^+][OH^-]=10^{14}\\\\(0.01)[OH^-]=10^{-14}\\\\OH^-=10^{-12}[/tex]
Thus, the [OH-] of a solution prepared by dissolving 0.0912 g of hydrogen chloride in sufficient pure water to prepare 250.0 ml of solution is [tex]10^{-12}[/tex] M.
Find more information about pH here:
brainly.com/question/13557815
What would the cathode be in a nickel and copper electrolytic cell
Answer:
d
Explanation:
A solid white substance A is heated strongly in the absence of air. It decomposes to form a new white substance B and a gas C. The gas has exactly the same properties as the product obtained when carbon is burned in an excess of oxygen. Based on these observations, can we determine whether solids A and B and the gas C are elements or compounds?
Answer:
A, B and C are compounds
Explanation:
First of all, I need to establish that when carbon is burnt in excess oxygen, carbon dioxide is obtained as shown by this equation; C(s) + O2(g) ----> CO2(g).
Looking at the presentation in the question, A was said to be heated strongly and it decomposed to B and C. Only a compound can decompose when heated. Elements can not decompose on heating. Secondly, compounds usually decompose to give the same compounds that combined to form them. Compounds hardly decompose into their constituent elements.
Again from the information provided, the compound A is a white solid. This is likely to be CaCO3. It decomposes to give another white solid. This may be CaO and the gas was identified as CO2.
Hence;
CaCO3(s)--------> CaO(s) + CO2(g)
If 50 ml of 1.00 M of H2SO4 and 50 ml of 2.0 M KOH are mixed what is the concentration of the resulting solutes?
Answer: [H2SO4] = 0.5M;
[KOH] = 1M
Explanation: Molarity is the solution concentration defined by:
molarity = [tex]\frac{mol}{L}[/tex] or M
To determine the concentration of the mixture, find how many mols of each compound there are in the mixture:
50 mL = 0.05L
H2SO4
1 mol/L * 0.05L = 0.05mol
KOH
2mol/L * 0.05L = 0.1 mol
The mixture has a total volume of:
V = 50 + 50 = 100 mL = 0.1 L
The concentration of the resullting solutes:
[H2SO4] = [tex]\frac{0.05}{0.1}[/tex] = 0.5 M
[KOH] = [tex]\frac{0.1}{0.1}[/tex] = 1 M
Concentration of H2SO4 is 0.5M while for KOH is 1M.
A compound consisting of atoms of small atomic mass is more likely to require what
Answer:
a lower temperature to liquefy
Explanation:
Write the empirical formula
Answer:
[tex]Pb(CO_{3})_{2} \\Pb(NO_{3})_{4} \\FeCO_{3}\\Fe(NO_{3})_{2}[/tex]
Explanation:
[tex]Pb^{4+}(CO_{3}^{2-})_{2} --->Pb(CO_{3})_{2} \\Pb^{4+} (NO_{3}^{-})_{4} --->Pb(NO_{3})_{4} \\Fe^{2+} CO_{3}^{2-} --->FeCO_{3}\\Fe^{2+} (NO_{3}^{-})_{2}--->Fe(NO_{3})_{2}[/tex]
a soluation of acetone in water has a molarity of 2.422M and a density of 0.970 g/mL. Calculate the mole fraction
Answer:
[tex]x_{acetone}=7.970x10^{-3}[/tex]
Explanation:
Hello,
In this case, for the given molarity, we can assume a volume of 1 L of solution, to obtain the following moles of acetone:
[tex]n=0.422mol/L*1L=0.422mol[/tex]
Then, with the density of solution, we can compute the mass of the solution for the selected 1-L volume basis:
[tex]m_{solution}=1L*\frac{1000mL}{1L}*\frac{0.970g}{1mL}=970g[/tex]
After that, we compute the mass of water in the solution, considering the mass of acetone (molar mass = 58.08 g/mol):
[tex]m_{H_2O}=970g-0.422molAcetone*\frac{58.08g\ Acetone}{1mol\ Acetone} =945.49gH_2O[/tex]
Next, the moles of water:
[tex]n_{H_2O}=945.49g*\frac{1molH_2O}{18gH_2O} =52.53molH_2O[/tex]
Finally, the mole fraction:
[tex]x_{acetone}=\frac{n_{acetone}}{n_{acetone}+n_{H_2O}}=\frac{0.422mol}{0.422mol+52.53mol}\\ \\x_{acetone}=7.970x10^{-3}[/tex]
Regards.
what is the value of the equilibrium constant at 500k for a chemical equilivrium that has a delta h value of 250kj mol and s value of 48 j mol k
Explain with examples following characteristics of chemical reactions: a. Change of colour b. Evolution of gas c. Change of smell d. Change of state
Answer:
Explanation:
a. change of colour:
A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products. The products have different molecular structures than the reactants. Different atoms and molecules radiate different colours of light. Hence, there usually is a change in colour during a chemical reaction.
Eg: copper reactions with the elements
b. Evolution of gas:
A gas evolution reaction is a chemical reaction in which one of the end products is a gas such as oxygen or carbon dioxide.
Eg: ammonium hydroxide breaks down to water and ammonia gas.
c. Change of smell :
Production of an Odor Some chemical changes produce new smells. ... The formation of gas bubbles is another indicator that a chemical change may have occured.
Eg: The chemical change that occurs when an egg is rotting produces the smell of sulfur.
d. Change of state:
A chemical reaction is a process in which one or more substances, also called reactants, are converted to one or more different substances, known as products.
Eg: candle wax (solid) melts initially to produce molten wax (liquid)
plz mark as brainliest!!!!
What is the molarity of a solution that is 7.00% by mass magnesium sulfate and has a density of 1.071 g/mL?
Answer:
0.623 M
Explanation:
Step 1: Given data
Percent by mass (%m/m): 7.00 %Density of the solution (ρ): 1.071 g/mLMolar mass of magnesium sulfate: 120.37 g/molStep 2: Calculate the percent by volume (%m/v)
We will use the following expression.
[tex]\%m/v = \%m/m \times \rho = 7.00\% \times 1.071g/mL = 7.50g\%mL[/tex]
Step 3: Calculate the molarity
7.50 g of magnesium sulfate are dissolved in 100 mL of the solution. The molarity is:
[tex]M = \frac{7.50g}{120.37g/mol \times 0.100L } = 0.623 M[/tex]
Given that the molar mass of NAOH is 40.00G/MOL, what mass of NAOH is needed to make 2.500 L of a 2.000 M NaOH Solution?
Answer:
200g
Explanation:
n = CV
n = mass/molar mass
mass/molar mass = CV
mass/40 = 2 x 2.5
mass/40 = 5
mass = 5x 40
mass = 200g
The lock and key model and the induced fit model are two models of enzyme action explaining both the specificity and the catalytic activity of enzymes. Indicate whether each statement is part of the lock and key model, the induced fit model, or is common to both models.
a. Enzyme conformation changes when it binds the substrate so the active site fits the substrate
b. Substrate binds to the enzyme at the active site, forming an enzyme-substrate complex
c. Enzyme active site has a rigid structure complementary
d. Substrate binds to the enzyme through noncovalent interactions
Answer:
"The active site of the enzyme has a complementary rigid structure" belongs to the key and lock system
"The conformation of the enzyme changes when it binds to the substrate so that the active site conforms to the substrate." belongs to the induced fit system.
"The substrate binds to the enzyme at the active site, forming an enzyme-substrate complex" belongs to both, that is, the key and lock system and the induced fit system.
"The substrate binds to the enzyme through non-covalent interactions" can belong to both enzyme systems.
Explanation:
Enzymatic key and lock systems bear this name because the enzyme at its site of union with the substrate has an ideal shape so that its fit is perfect, similar to a headbreaker, so once they are joined they are not It can bind another substrate to the enzyme, since they are generally associated with strong chemical bonds.
The shape of the enzyme's active site is a negative of what the shape of the substrate would be.
On the other hand, in the mechanism or enzyme system of induced adjustment, the enzyme has an active site that is where it binds with the substrate and another site where another chemical component binds, which when this chemical component binds this enzyme changes its morphology and becomes "active" to bond with your substrate.
This happens a lot in the inactive enzymes that are usually activated in digestive processes since the fact that these enzymes are constantly active would be dangerous, therefore the body takes the induced enzyme system as a control mechanism, where a molecule or chemical compound induces change morphological of an enzyme by means of the allosteric union so that it joins its substrate and catalyzes or analyzes it, depending on the enzymatic character of the enzyme.
If an electromagnetic wave has a frequency of 4.5 x 10^18 Hz, what is its wavelength? The speed of light is 3 x 108 m/s.
Answer:
Wavelength, λ = 6.7 x 10^-11 m
Explanation:
Frequency and wavelength are inversely proportional to each other.
In this problem;
f = 4.5 x 10^18 Hz
wavelength, λ = ?
Speed of light, c = 3 x 108 m/s.
These variables are related by the following equation;
c = λ * f
Making λ subject of focus, we have;
λ = c / f
λ = 3 x 10^8 / 4.5 x 10^18
λ = 0.67 x 10^-10
λ = 6.7 x 10^-11 m
A chemist observed an unknown Balmer Series decay through an emission of 410 nm. Using the experimental wavelength, determine the energy levels transition involved in the
emitted wavelength.
Answer:
Option D is correct.
n = 6 to n = 2
Explanation:
Like all waves emitted from the movement of electrons from one energy level to another, the wavelength (λ) is given by the equation involving Rydberg's constant
(1/λ) = Rₕ [(1/n₂²) - (1/n₁²)]
where Rₕ = 10973731.57 m⁻¹ = (1.0974 × 10⁷) m⁻¹
n₂ = principal quantum number corresponding to the final energy level of the electron = 2 (For Balmer Series)
n₁ = principal quantum number corresponding to the final energy level of the electron = ?
λ = 410 nm = (410 × 10⁻⁹) m
(1/λ) = (2.439 × 10⁶) m⁻¹
2.439 × 10⁶ = (1.0974 × 10⁷) [(1/2²) - (1/n₁²)]
0.25 - (1/n₁²) = (2.439 × 10⁶) ÷ (1.0974 × 10⁷) = 0.2222602562
(1/n₁²) = 0.25 - 0.2222602562 = 0.0277397438
n₁² = (1/0.0277397438) = 36.05
n₁ = 6
Hope this Helps!!!
Which of the following would be useful for converting g/mol to g/L?
A. Mass percent
B. Avogadro's number
C. Molarity
D. Molar mass
Answer:
Molarity
Explanation:
The conversion of g/mol to g/L molarity can be used. Thus, option C is correct.
The g/mol has been the amount of solute present in a mole. The g/mol has been the molecular weight of the compound.
The g/L has been the mass of solute present in a L of solution. The g/L has the unit for density.
Molarity has been the moles of solute present in the liter of solution. It has been given as mol/L.
The product of g/mol and g/L gives the value of mol/L. Thus, to convert g/mol to g/L molarity can be used. Thus, option C is correct.
For more information about g/L refer to the link:
https://brainly.com/question/13153210
The force that opposes drag and is powered by combustion reactions in the
engine is
Answer:
Thrust.
Explanation:
hope this helps you :)
Answer:
thrust
Explanation:
A gas contained in a steel tank has a volume of 1.5 L at a temperature of 390 K. What will be the volume when the temperature changes to 1470C? Group of answer choices
Answer:
1.5 L
Explanation:
If the gas is contained in a steel tank, the volume will remain constant when the temperature changes.
The volume will be 1.5 L.
A silver cube with an edge length of 2.42 cm and a gold cube with an edge length of 2.75 cm are both heated to 85.4 ∘C and placed in 112.0 mL of water at 20.5 ∘C . What is the final temperature of the water when thermal equilibrium is reached?
Answer:
Explanation:
Volume of silver cube = 2.42³ = 14.17 cm³
mass of silver cube = volume x density
= 14.17 x 10.49 = 148.64 gm
Volume of gold cube = 2.75³ = 20.8 cm³
mass of gold cube = 20.8 x 19.3 = 401.44 gm
specific heat of silver and gold are .24 and .129 J /g°C
mass of 112 mL water = 112 g
Heat absorbed = heat lost = mass x specific heat x temperature fall or rise
Heat lost by metals
= 148.64 x .24 x ( 85.4 -T) + 401.44 x .129 x ( 85.4 - T )
= (35.67 + 51.78 ) x ( 85.4 - T )
87.45 x ( 85.4 - T )
= 7468.23 - 87.45 T
Heat gained by water
= 112 x 1 x ( T - 20.5 )
= 112 T - 2296
Heat lost = heat gained
7468.23 - 87.45 T = 112 T - 2296
199.45 T = 9764.23
T = 48.95° C
What are the correct formulas and coefficients for the products of the following double-replacement reaction? RbOH + H3PO4→
Answer:
3 RbOH + H₃PO₄ → Rb₃PO₄ + 3 H₂O
Explanation:
Let's consider the double-replacement reaction between rubidium hydroxide and phosphoric acid to form rubidium phosphate and water. The cation rubidium replaces the cation hydrogen and the anion hydroxyl replaces the anion phosphate. The balanced chemical reaction is:
3 RbOH + H₃PO₄ → Rb₃PO₄ + 3 H₂O
Use the reaction I2(s) I2(g), H = 62.4 kJ/mol, S = 0.145 kJ/(molK)
At what temperature is the reaction at equilibrium?
A.157K
B.430K
C.0.002K
D.62K
Answer: B. 430 K
Explanation:
According to Gibb's equation:
[tex]\Delta G=\Delta H-T\Delta S[/tex]
[tex]\Delta G[/tex] = Gibbs free energy
[tex]\Delta H[/tex] = enthalpy change = +62.4 kJ/mol
[tex]\Delta S[/tex] = entropy change = +0.145 kJ/molK
T = temperature in Kelvin
[tex]\Delta G[/tex] = +ve, reaction is non spontaneous
[tex]\Delta G[/tex] = -ve, reaction is spontaneous
[tex]\Delta G[/tex] = 0, reaction is in equilibrium
[tex]\Delta H-T\Delta S=0[/tex] for reaction to be spontaneous
[tex]T=\frac{\Delta H}{\Delta S}[/tex]
[tex]T=\frac{62.4kJ/mol}{0.145kJ/molK}=430K[/tex]
Thus the Reaction is spontaneous when temperature is 430 K.
Answer:
430 K
Explanation:
i just took the test on a pex :)
4. A puddle of coastal seawater, caught in a depression formed by some coastal rocks at high tide, begins to evaporate as the tide goes out. If the volume of a puddle decreases to 23% of its original volume, what is the sodium chloride concentration if it was initially 0.449 M?
Answer:
0.583M NaCl
Explanation:
Molarity is an unit of concentration defined as the ratio between moles of solute and liters of solution.
In the puddle, the solute is sodium chloride that is dissolved in water and you have 0.449 moles of NaCl per liter of water
When the solution begins to evaporate, amount of water decreases whereas moles of NaCl remain constant.
As 23% of the water evaporates, amount of water that remains is 100-23 = 77%, that means now you have 0.449 moles of NaCl per 77% of a liter, 0.770L. The new concentration is:
0.449 moles NaCl / 0.770L =
0.583M NaClAt a temperature of 393 K, the pressure of a sample of nitrogen is 1.07 atm. What will the pressure be at a temperature of 478 K? (Assume constant volume)
Answer:
1.30atm
Explanation:
P1/T1 = P2/T2
1.07/393 = P2/478
Answer: the first one is correct
Explanation:
jhkfjfjgjgjjggj
What energy transfer happens when wood is burning?
Answer:
Mechanical to Heat
explanation:
The wood itself can make mechanical energy but when it's on fire it makes heat energy
Answer: Chemical to heat and light
Explanation: The energy transforms from chemical energy to heat and light energy. Because when the candle burns a chemical reaction occurs and produces heat and light.
A sample of oxygen is collected over water at a total pressure of 692.2 mmHg at 17°C. The vapor pressure of water at 17°C is 14.5 mmHg. The partial pressure of the O2
Answer:
677.7 mmHg
Explanation:
The first empirical study on the behaviour of a mixture of gases was carried out by John Dalton. He established the effects of mixing gases at different pressures in the same vessel.
Dalton's law states that,the total pressure exerted by a mixture of gases is equal to the sum of the partial pressures of the individual gases present in the mixture of gases. When a gas is collected over water, the gas also contains some water vapour. The partial pressure of the gas will now be given as; total pressure of gas mixture - saturated vapour pressure of water (SVP) at that temperature.
Given that;
Total pressure of gas mixture = 692.2 mmHg
SVP of water at 17°C = 14.5 mmHg
Therefore, partial pressure of oxygen = 692.2-14.5
Partial pressure of oxygen = 677.7 mmHg
What is the product(s) of the reaction below?
2Al(s) + Fe2O3(s) Al2O3(s) + 2Fe(s)
A. Solid aluminum oxide and solid iron
B. Solid aluminum
C. Saturated aluminum oxide and saturated iron
D. Iron(III) oxide and aluminum oxide
Answer:
I would put A
Explanation:
A new substance is produced as a result of a chemical reaction in which bonds between the molecules of the reactant and product are broken and new bonds are formed. Here the products are Al₂O₃ and Fe. The correct option is A.
Chemical reactions are interactions between two or more molecules that result in the production of new products. Products, as opposed to reactants, are compounds that result from an interaction between two other substances.
The reactants are on the left, while the products that are created are on the right. A one-headed or two-headed arrow connects the reactants and products.
Thus the correct option is A.
To know more about reaction, visit;
https://brainly.com/question/34137415
#SPJ4
The mathematics of combining quantum theory with wave motion of atomic particles is known as _____.
Combining quantum theory with wave motion of atomic particles is: Wave Mechanics
Cual es la diferencia entre agua pesada y agua ligera a) el agua pesada contiene mas minerales que el agua ligera b) el agua ligera es liquida mientras el agua pesada es solida c) el agua ligera es agua purificada y el agua pesada es agua contaminada d) el agua pesada contiene mas elementos estearato de sodio
Answer:
d) El agua pesada contiene mas elementos
Explanation:
La diferencia fundamental entre el agua pesada y el agua ligera es que la primera tiene una proporción mayor de deuterio que la segunda. El deuterio es un ión del hidrógeno que tiene un peso atómico mayor que el hidrógeno común y corriente. Por ende, la opción D ofrece la mejor aproximación.
Answer:
....................
lllllllllllllllll
Explanation:ki