Answer:
The amount of heat to absorb is 6,261 J
Explanation:
Calorimetry is in charge of measuring the amount of heat generated or lost in certain physical or chemical processes.
The total energy required is the sum of the energy to heat the ice from -20 ° C to ice of 0 ° C, melting the ice of 0 ° C in 0 ° C water and finally heating the water to 60 ° C.
So:
Heat required to raise the temperature of ice from -20 °C to 0 °CBeing the sensible heat of a body the amount of heat received or transferred by a body when it undergoes a temperature variation (Δt) without there being a change of physical state (solid, liquid or gaseous), the expression is used:
Q = c * m * ΔT
Where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation (ΔT=Tfinal - Tinitial).
In this case, m= 10 g, specific heat of the ice= 2.1 [tex]\frac{J}{g*C}[/tex] and ΔT=0 C - (-20 C)= 20 C
Replacing: Q= 10 g*2.1 [tex]\frac{J}{g*C}[/tex] *20 C and solving: Q=420 J
Heat required to convert 0 °C ice to 0 °C waterThe heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:
Q= m* ΔHfusion
In this case, being 1 mol of water= 18 grams: Q= 10 g*[tex]6.0 \frac{kJ}{mol} *\frac{1 mol of water}{18 g}[/tex]= 3.333 kJ= 3,333 J (being kJ=1,000 J)
Heat required to raise the temperature of water from 0 °C to 60 °CIn this case the expression used in the first step is used, but being: m= 10 g, specific heat of the water= 4.18 [tex]\frac{J}{g*C}[/tex] and ΔT=60 C - (0 C)= 60 C
Replacing: Q= 10 g*4.18 [tex]\frac{J}{g*C}[/tex] *60 C and solving: Q=2,508 J
Finally, Qtotal= 420 J + 3,333 J + 2,508 J
Qtotal= 6,261 J
The amount of heat to absorb is 6,261 J
The amount of heat to absorb is 6,261 J.
Calculation for heat:Heat required to raise the temperature of ice from -20 °C to 0 °C.
The formula for specific heat is used to calculate the amount of heat
Q = c * m * ΔT
Where,
Q =heat exchanged by a body,
m= mass of the body
c= specific heat
ΔT= change in temperature
Given:
m= 10 g,
specific heat of the ice= 2.1
ΔT=0 C - (-20 C)= 20 C
On substituting the values:
Q= 10 g*2.1 *20 C
Q=420 J
Heat required to convert 0 °C ice to 0 °C water.
The heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:
Q= m* ΔHfusion
Heat required to raise the temperature of water from 0 °C to 60 °C
m= 10 g,
Specific heat of the water= 4.18
ΔT=60 C - (0 C)= 60 C
On substituting:
Q= 10 g*4.18 *60 C
Q=2,508 J
Thus, Qtotal= 420 J + 3,333 J + 2,508 J
Qtotal= 6,261 J
The amount of heat to absorb is 6,261 J
Find more information about Specific heat here:
brainly.com/question/13439286
fishes can live inside a frozen pond why
Answer:
Underneath the frozen upper layer, the water remains in its liquid form and does not freeze. Also, oxygen is trapped beneath the layer of ice. As a result, fish and other aquatic animals find it possible to live comfortably in the frozen lakes and ponds. ... This irregular expansion of water is called anomalous expansion.
Explanation:
so pretty much its because there is water under the top frozen layer and air is trapped underneath the ice
Classify each of the following fatty acids as saturated, monounsaturated, or polyunsaturated. Drag the appropriate items to their respective bins.
1. myristic acid
2. oleic acid
3. linoleic acid
4. palmitic acid
A. Saturated acids
B. Monounsaturated acids
C. Polyunsaturated acids
Answer:
A. Saturated acids - 1. myristic acid, 4. palmitic acid
B. Monounsaturated acids - 2. oleic acid
C. Polyunsaturated acids - 3. linoleic acid
Explanation:
Saturated fatty acids are the fats combined together with a single bond and no double or triple bond while unsaturated fatty acids are the fats having a double or triple bond between them.
Monosaturated acids have only one double or triple bond while polyunsaturated acids have more than one double or triple bond.
So, an appropriate match of given acids are:
A. Saturated acids - Myristic acid (CH3(CH2)12COOH) and Palmitic acid (CH3(CH2)14COOH) dont have any double or triple bonds.
B. Monounsaturated acids - Oleic acid (CH3(CH2)7CH=CH(CH 2)7COOH) have only one double bond.
C. Polyunsaturated acids - Linoleic acid (HOC–7CH=CH–CH 2–CH=CH–3H) has two double bonds.
Hence, the correct answer is:
A. Saturated acids - 1. myristic acid, 4. palmitic acid
B. Monounsaturated acids - 2. oleic acid
C. Polyunsaturated acids - 3. linoleic acid
"Aqueous solutions of lead nitrate and ammonium chloride are mixed" together. Which statement is correct
Answer:
PbCl₂ will precipitate from solution.
Explanation:
Statements are:
Insufficient information is given.
Both NH4NO3 and PbCl2 precipitate from solution.
No precipitate forms.
PbCl2 will precipitate from solution.
NH4NO3 will precipitate from solution.
The reaction of ammonium chloride (NH₄Cl) with lead nitrate (Pb(NO₃)₂) is:
Pb(NO₃)₂ + 2NH₄Cl → PbCl₂ + 2 NH₄NO₃
Talking of rules of solubility, all nitrates are soluble in water, that means NH₄NO₃ is soluble and no precipitate is formed.
In the same way, all chlorides are soluble except silver chloride and lead chloride. That means:
PbCl₂ (Lead chloride) will precipitate from solution.GIVING 100 POINTS PLEASE ANSWER SOON When ponds freeze, they freeze at the surface first before freezing at the bottom. Which property of water explains why this might happen? Density Adhesion High boiling point High specific heat
Answer:
[tex]\huge\boxed{Density}[/tex]
Explanation:
This is because of density. Since Ice is less dense than water, the ice even formed inside the pond then starts floating on the surface of water. Because of this density, Ice floats on water and thus the water freezes at the surface.
Answer:
Density
Explanation:
Water is less dense as a solid than as a liquid, so as ponds freeze, the ice floats at the top and the pond freezes from the top-down.
3. HNO3 + NaHCO3 → NaNO3 + H2O + CO2
4. AgNO3 +CaCl2 → AgCl + Ca(NO3)2
5. 3 H2(g) + N2(g) → 2 NH3(g)
6. 2 H202 → 2 H2O + O2
Write word equation and type of reaction
Answer:
hydrogen nitrate + sodium hydrochlorate- sodium nitrate+ water + co2 (acid base reaction)
silver nitrate + calcium chloride - silver chloride+ calcium nitrate ( double displacement reaction)
hydrogen + nitrogen - ammonia gas ( simple contact reaction)
hydrogen peroxide - water + oxygen ( single displacement reaction)
Hope it helps :)
105/22 • (1.251 - 0.620)=
Answer:
105/22*(1.251-0.620)
105/22*0.631
4.772*0.631
3.011132
Hope it helps
Answer:
3.0
Explanation:
First, complete the operations inside the parenthesis according to the normal rules for significant figures. Because there are subsequent calculations, keep at least one extra significant figure when possible: (4.7727) × (0.631).
The final product will be rounded to two significant figures because it can’t be more precise than the least precise number in the problem, 22. The final product is 3.0.
Which solution, if either, would create the higher osmotic pressure (compared to pure water): one prepared from 1.0 g of NaCl in 10 mL of water or 1.0 g of CsBr in 10 mL of water
Answer: NaCl would give the higher pressure
Explanation:
Osmotic pressure depends only on the number of ions.
NaCl dissociates as Na+ and Cl- ; CsBr dissociates as Cs+ and Br-
But the concentration of the solutions are different.
Concentration (morality ) of NaCl = Moles /Litre = (1 g /58.44g/mol)/0.01L
Total number of ions in NaCl solution = 2 x (1 g /58.44g/mol)/0.01L ( 1 mol NaCl gives 2 moles ions, 1 mol Na+ and 1 mol Cl-)
= 1.71×2RT
Similarly total number of ions in CsBr solution = 2 x (1 g /212.80 g/mol)/0.01L
= 0.47×2RT
Therefore osmotic pressure is higher in NaCl solution.
I 100 mL o a pharmaceutical preparation contains 20 mL o a 50% w/v solution o benzalkonium chloride, what is the percent strength o that agent in the solution
The percentage strength of the agent is 10 %
Since 100 mL of a pharmaceutical preparation contains 20 mL of a 50% w/v solution of benzalkonium chloride, we desire to find the percentage strength of that agent in the 100 mL solution.
Let C₁ = percentage strength of 20 mL solution = 50 %, V₁ = initial volume = 20 mL, C₂ = percentage strength of agent in 100 mL solution and V₂ = final volume = 100 mL.
Since the initial quantity of agent in 20 mL solution equals the final quantity of agent in 100 mL solution, we have that
C₁V₁ = C₂V₂
So, making C₂ = percentage strength of agent in 100 mL solution the subject of the formula, we have
C₂ = C₁V₁/V₂
Substituting the values of the variables into the equation, we have
C₂ = C₁V₁/V₂
C₂ = 50 % × 20 mL/100 mL
C₂ = 50 % × 0.2
C₂ = 10 %
So, the percentage strength of the agent is 10 %.
Learn more about percentage strength here:
https://brainly.com/question/11054897
The change in entropy for the surroundings in a situation where heat flows from a hotter system to a cooler surrounding is: ________
a. Greater than zero
b. Less than zero
c. Equal to zero
d. Impossible to predict
Answer:
A
Explanation:
The change in entropy for the surroundings in a situation where heat flows from a hotter system to a cooler surrounding is Greater than Zero.
Here the randomness of the molecules increase as the temperature of the surrounding increases.( it absorbs heat from the system).
Answer:
Option a (Greater than zero) is the correct answer.
Explanation:
The entropy transition can sometimes be due to something like the reconfiguration of atom or molecule through one sequence to the next. In the substances, there would be a corresponding increase throughout entropy mostly during response unless the compounds are still very much abnormal compared with the reaction mixture.Some other three choices don't apply to either the situations in question. And the correct approach will be Options A.
Which one of the following compounds will be soluble in water?
A) AgCI
B) PbCO3
C) CaSO4
D) Cu(OH)2
E) LiCl
The compound that has been soluble in water will be LiCl. Thus option E is correct.
The compounds that form stable bonds in water and are easy to dissociate are soluble in water. Generally, ionic compounds are easily soluble in water.
AgCl:It has been an ionic compound, but the dissociation of AgCl will simultaneously form AgCl again making the compound insoluble in water.
[tex]\rm \bold{PbCO_3}[/tex]:It has been a covalent compound, thus it has been insoluble in water.
[tex]\rm \bold{CaSO_4}[/tex]:The compound is covalent in nature, thus it has been hard to dissociate in water.
[tex]\rm \bold{Cu(OH)_2}[/tex]:The copper in the compound has been hard to dissolve and precipitate in the solution.
LiCl:It has been an ionic compound and can be easily dissociated in the water.
Thus the compound that has been soluble in water will be LiCl. Thus option E is correct.
For more information about the soluble compounds, refer to the link:
https://brainly.com/question/1397002
What is the edge length of a face-centered cubic unit cell that is made of of atoms, each with a radius of 154 pm
Answer:
The edge length of a face-centered cubic unit cell is 435.6 pm.
Explanation:
In a face-centered cubic unit cell, each of the eight corners is occupied by one atom and each of the six faces is occupied by a single atom.
Hence, the number of atoms in an FCC unit cell is:
[tex] 8*\frac{1}{8} + 6*\frac{1}{2} = 4 atoms [/tex]
In a face-centered cubic unit cell, to find the edge length we need to use Pythagorean Theorem:
[tex] a^{2} + a^{2} = (4R)^{2} [/tex] (1)
Where:
a: is the edge length
R: is the radius of each atom = 154 pm
By solving equation (1) for "a" we have:
[tex] a = 2R\sqrt{2} = 2*154 pm*\sqrt{2} = 435.6 pm [/tex]
Therefore, the edge length of a face-centered cubic unit cell is 435.6 pm.
I hope it helps you!
Gaseous indium dihydride is formed from the elements at elevated temperature:
In(g)+H2(g)⇌InH2(g),Kp=1.48 at 973 K
The partial pressures measured in a reaction vessel are
PIn =0.0540atm
PH2= 0.0250atm
PInH2 =0.0780atm
Calculate Qp and give equal partial pressure for In, H2, and InH2.
Answer:
The reaction given is:
In (g) + H₂ (g) ⇔ InH₂ (g), the Kp is 1.48 at 973 K.
The partial pressures measured in the reaction vessel is Partial pressure of In is 0.0540 atm, partial pressure of H₂ is 0.0250 atm, and the partial pressure of InH₂ is 0.0780 atm. By using the table given in the attachment below, the value of PInH₂ is (0.078-x), PIn is (0.054 + x), and the value of PH2 is (0.025 + x).
Kp = PInH₂/PIn × PH₂ = (0.078 - x) / (0.054 +x) (0.025 + x)
1.48 = (0.078 - x) / (0.054 +x) (0.025 + x)
x = 0.06689
Now the partial pressures of In, H₂ and InH₂ will be,
PH₂ = 0.025 + x = 0.025 + 0.0668 = 0.0918 atm
PIn = 0.054 + 0.0668 = 0.1208 atm
PInH₂ = 0.078 - 0.0668 = 0.0112 atm
Now the Qp or the reaction quotient will be,
Qp = (0.078) / (0.054) (0.025) = 57.78.
Where are the most gases located on the periodic table?
Answer:
They are mostly located in group 18 (column 18), or far right
Which of the following is an example of a physical, rather than a chemical, change?
Answer: The question is not clear
Explanation:
Determine whether the following statement about reaction rates is true or false. If the statement is false, select the reason why?
Increasing the temperature of a reaction system decreases the activation energy of the reaction.
Answer:
False
Explanation:
Reaction rates is a field under chemical kinetics that deals with the measure of speed of a chemical reaction. It is the change in the concentration of a reactant or product per unit time.
Activation Energy is a theory been put forward to explain why different chemical reactions proceed at different rates.
Activation Energy theory postulates that for a reactant to transform into a product , the colliding particles or molecules of the reactant must possess a certain amount of energy so as to overcome the reaction barrier.
An important factor which may influence the attainment of activation energy by colliding particles of reactants is the temperature at which the reaction is carried out. The higher the temperature, the greater is the fraction of the reactant particles which possess the activation energy and thus the faster the reaction becomes. SO , in essence increasing the temperature of a reaction system do not decreases the activation energy of the reaction but rather also increases the activation energy of the reaction.
How many moles of bromine will react with 0.0500 mole of C 2H 2 in the reaction C 2H 4 + Br 2 → C 2H 4Br 2?
Answer:
0.05 mole of Br2.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
C2H4 + Br2 —› C2H4Br2
From the balanced equation above,
1 mole of C2H4 reacted with 1 mole of Br2 to produce 1 mole of C2H4 Br2.
Finally, we shall determine the number of moles bromine that will react with 0.05 mole of C2H2.
The number of mole of Br2 needed for the reaction can be obtained as follow:
From the balanced equation above,
1 mole of C2H4 reacted with 1 mole of Br2.
Therefore, 0.05 mole of C2H4 will also react with 0.05 mole of Br2.
Therefore, 0.05 mole of Br2 is needed for the reaction.
Experiment:
Part I: Voltaic Cell
Assume that you are provided with the following materials:
Strips of metallic zinc, metallic copper, metallic iron
1M aqueous solutions of ZnSO4, CuSO4, FeSO4, and aqueous iodine (I2)
Other required materials to create Voltaic cells such as beakers, porous containers, graphite rods, a voltmeter, and a few wires with alligator clips.
In this modified version of the lab, after thoroughly studying the lab hand out and watching the videos, identify 4 different combinations of Voltaic cells that are possible to be created with the above materials.
For each cell created, include the following details.
Which electrode was the anode and which was the Cathode?
The anode and cathode half reactions.
Balanced equation for each cell you propose to construct.
Calculated Eocell
Short hand notation (line notation) for each cell (be sure to include the inactive electrode if needed)
Answer:
Here are four possible voltaic cells.
Explanation:
1. Standard reduction potentials
E°/V
I₂(s) + 2e⁻ ⟶ 2I⁻(aq); 0.54
Cu²⁺(aq) + 2e⁻ ⟶ Cu(s); 0.34
Fe²⁺(aq) + 2e⁻ ⟶ Fe(s); -0.41
Zn²⁺(aq) + 2e⁻ ⟶ Zn(s); -0.76
2. Possible Voltaic cells
(a) Zn/I₂
E°/V
Anode: Zn(s) ⟶ Zn²⁺(aq) + 2e⁻; 0.76
Cathode: I₂(s) + 2e⁻ ⟶ 2I⁻(aq); 0.54
Cell: Zn(s) + I₂(s) ⟶ Zn²⁺(aq) + 2I⁻(aq); 1.30
Zn(s)|Zn²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)
Zn is the anode; graphite is the cathode.
(b) Zn/Cu²⁺
E°/V
Anode: Zn(s) ⟶ Zn²⁺(aq) + 2e⁻; 0.76
Cathode: Cu²⁺(aq) + 2e⁻ ⟶ Cu(s); 0.34
Cell: Zn(s) + Cu²⁺(s) ⟶ Zn²⁺(aq) + Cu(s); 1.10
Zn(s)|Zn²⁺(aq)∥Cu²⁺(aq)|Cu(s)
Zn is the anode; Cu is the cathode.
(c) Zn/Fe²⁺
E°/V
Anode: Zn(s) ⟶ Zn²⁺(aq) + 2e⁻; 0.76
Cathode: Fe²⁺(aq) + 2e⁻ ⟶ Fe(s); -0.41
Cell: Zn(s) + Fe²⁺(s) ⟶ Zn²⁺(aq) + Fe(s); 0.35
Zn(s)|Zn²⁺(aq)∥Fe²⁺(aq)|Fe(s)
Zn is the anode; Fe is the cathode.
(d) Fe/I₂
E°/V
Anode: Fe(s) ⟶ Fe²⁺(aq) + 2e⁻; 0.41
Cathode: I₂(s) + 2e⁻ ⟶ 2I⁻(aq); 0.54
Cell: Zn(s) + I₂(s) ⟶ Zn²⁺(aq) + 2I⁻(aq); 0.95
Fe(s)|Fe²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)
Fe is the anode; graphite is the cathode.
Calculate a pressure at a point that is 100 m below the surface of sea water of density 1150 kgm?
Answer:
1229.08975 kPa
Explanation:
Given that:
The depth of the water = 100 m below the surface of the water.
The density of the water = 1150 kgm
The mass of the water = depth of the water × density of the water
The mass of the water = 100 m × 1150 kgm
The mass of the water = 115000 kgf/m²
The mass of the water is the pressure of the water at a depth of 100 m below the surface of the water.
Since 1 kgf/m² = 0.00980665 kPa
Then 115000 kgm² = (115000 × 0.00980665) kPa
= 1127.76475 kPa
At standard temperature and pressure , the atmospheric pressure = 101.325 kPa.
Therefore, the pressure below the surface of sea water = 1127.76475 kPa + 101.325 kPa
= 1229.08975 kPa
Which of the following substances (along with its corresponding salt) would be best suited for generating a buffer solution with a pH below 7?
a. CH3CO2H
b. C5H5N
c. HCl
d. None of the above
Answer:
d. None of the above
Explanation:
A buffer works when pH of the buffer is ± 1. Out of this range, the buffering capacity is very low.
Acetic acid, CH₃CO₂H, has a pKa of 4.74. That means its buffering capacity is between 3.74 and 5.74 of pH. Is not a good buffer to pH 7
Pyridine is a weak base with pKa of 5.52. Its buffering capacity is between 6.52 and 4.52. Is not a good buffer to pH 7
HCl is a strong acid. Just weak acids and bases can produce a buffer with its conjugate base. HCl can't produce a buffer.
Thus, right answer is:
d. None of the aboveAnswer:
CH3CO2H
Explanation:
A weak acid, such as acetic acid, paired with its conjugate base (here, the acetate ion) will be an ideal system for creating an acidic buffer solution with a pH below 7.
1. Explain the test for unsaturation.
2. Write down the balanced chemical equations for the complete and incomplete
combustion of octene
3. Explain how propanol, an alcohol, is formed from propene..
4. How is margarine formed?
Answer:
1)In organic chemistry, the bromine test is a qualitative test for the presence of unsaturation (carbon-to-carbon double or triple bonds), phenols and anilines. ... The more unsaturated an unknown is, the more bromine it reacts with, and the less coloured the solution will appear.
2)The equation for incomplete combustion of propane is: 2 C3H8 + 9 O2 → 4 CO2 + 2 CO + 8 H2O + Heat. If not enough oxygen is present for complete combustion, incomplete combustion occurs. The result of incomplete combustion is, once again, water vapour, carbon dioxide and heat. But it also produces carbon monoxide.
Explanation:
3)Propene, also known as propylene, is an unsaturated organic compound with the chemical formula {\displaystyle {\ce {CH3CH=CH2}}}. It has one double bond, and is the second simplest member of the alkene class of hydrocarbons. It is a colorless gas with a faint petroleum-like odor.
Formula: C3H6
IUPAC ID: Propene
4)Margarines are chemically created during hydrogenation which, until January 1, 2006, relied upon trans fats to solidify their vegetable oils. Food companies have been exploring options for replacing trans fat in partially hydrogenated margarine.
Determine
the
number
of grams of C4H10
that
are
required
to
completely
react
to
produce 8.70 mol of CO2
according
to
the
following
combustion
reaction:
2 C₄H₁₀(g)
+
13 O₂(g)
→
8 CO₂(g)
+
10 H₂O(g)
Answer:
8 CO₂(g)
Explanation:
just took the exam
a cup of coffee changes from a temperature of75ﾟC to 12ﾟC. What is the change in temperature in ﾟC
Explanation:
why is because I never did this class
hxhdhdvhshwhzhzbs dsybsj hshsjshdvsk hate and hensksnsb show hxbshsn Hicks ay the back
Sometimes the oxidation state of an analyte must be adjusted before it can be titrated.
a. True
b. False
Answer:
Explanation:
True
Why can gasses change volume?
A. The forces holding the gas particles together are
stronger than gravity.
B. The gas particles have no mass, so they can change volume.
C. Gravity has no effect on gas particles, so they can float away.
O D. There are no forces holding the gas particles together.
Answer:
There are no forces holding the gas particles together.
Explanation:
Draw two constitutional isomers that share the molecular formula C3H8S. Your structures will have the same molecular formula but will have different connectivities.
Answer:
Two constitutional isomers for the compound C3H8S are shown in the attachment below
Explanation:
Constitutional isomers are isomers that have the same molecular formula but different connectivity. Two constitutional isomers for the compound C3H8S are shown in the attachment below.
As per the concept of structural isomers, the two constitutional isomers that share the molecular formula C₃H₈S are attached in attachment below.
Structural isomers are defined as the isomers in which atoms are completely arranged in a different order but the molecular formula remains the same.
They are the molecules which have same molecular formula but different connectivities of atoms which depend on the order they are put together. An increase in the number of carbon atoms leads to an increase in the structural isomers.
Learn more about structural isomers,here:
https://brainly.com/question/33929317
#SPJ6
What is the energy of a photon of electromagnetic radiation with a wavelength of 963.5 nm? (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s
Answer:
[tex]E=2.06\times 10^{-19}\ J[/tex]
Explanation:
Given that,
The wavelength of electromagnetic radiation is 963.5 nm.
We need to find the energy of a photon with this wavelength.
The formula used to find the energy of a photon is given by :
[tex]E=\dfrac{hc}{\lambda}\\\\E=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{963.5\times 10^{-9}}\\\\E=2.06\times 10^{-19}\ J[/tex]
So, the energy of a photon is [tex]2.06\times 10^{-19}\ J[/tex].
Emission of which one of the following leaves both atomic number and mass number unchanged?
(a) positron
(b) neutron
(c) alpha particle
(d) gamma radiation
(e) beta particle
Answer: Gamma Radiation
Explanation:
The emission of Gamma rays does not cause a change in both the atomic and mass number. They are electromagnetic radiation.
The radiations that leaves without changing the atomic mass and atomic number of the particle have been gamma radiations. Thus, option D is correct.
Radiations have been the energy that has been evolved by the particles during energy transitions. The nuclear decay results with the release of the energy from the particle resulting in the change in the atomic mass.
The electromagnetic radiations have been capable of emitting the radiation without changing the mass and atomic number of the element. The gamma radiations have been the electromagnetic radiations. Thus, option D is correct.
For more information about the emissions, refer to the link:
https://brainly.com/question/517329
Which of the following happens to a molecule of an object when the object is heated? (1 point)
Answer:
They get more energy, so they vibrate!
Explanation:
Why is it difficult to classify dissolving as simply a physical or a chemical change? (1 point)
O Some substances keep the same molecular structure when they break down, and others do not.
O Some substances release energy when they dissolve, and some absorb energy.
O Some substances taste the same after they dissolve, and others do not.
O Some substances keep the same color when they dissolve, and others do not.
Answer:
It is difficult because of C
Explanation:
The correct answer is:Some substances keep the same molecular structure when they break down, and others do not.
Some substances change their form when they dissolve and some do not. Dissolution can sometimes be regarded as a sort of reaction between a chemical substance and water.
Usually, we can consider dissolution of a substance in water as a sort of chemical reaction for some substances. For instance, an ionic substance interacts with water to form ions. similarly, some salts become hydrolysed in water and give acidic/basic solutions as result of that.
However, some substances do not interact with water upon dissolution. They rather remain as molecular entities because they are not composed of ions.
We can see that some substances keep the same molecular structure when they break down, and others do not keep the same molecular structure when they dissolve hence it is difficult to classify dissolving as a physical or a chemical change.
https://brainly.com/question/1161517
A 3.140 molal solution of NaCl is prepared. How many grams of NaCl are present in a sample containing 2.692 kg of water
Answer:
494.49 g of NaCl.
Explanation:
Data obtained from the question include the following:
Molality of NaCl = 3.140 m
Mass of water = 2.692 kg
Mass of NaCl =.?
Next, we shall determine the number of mole of NaCl in the solution.
Molality is simply defined as the mole of solute per unit kilogram of solvent. Mathematically, it is expressed as
Molality = mole of solute /Kg of solvent
With the above formula, we can obtain the number of mole NaCl in the solution as follow:
Molality of NaCl = 3.140 m
Mass of water = 2.692 kg
Mole of NaCl =..?
Molality = mole of solute /Kg of solvent
3.140 = mole of NaCl /2.692
Cross multiply
Mole of NaCl = 3.140 x 2.692
Mole of NaCl = 8.45288 moles
Finally, we shall covert 8.45288 moles of NaCl to grams. This can be obtained as follow:
Mole of NaCl = 8.45288 moles
Molar mass of NaCl = 23 + 35.5 = 58.5 g/mol
Mass of NaCl =.?
Mole = mass /Molar mass
8.45288 = mass of NaCl /58.5
Cross multiply
Mass of NaCl = 8.45288 × 58.5
Mass of NaCl = 494.49 g.
Therefore, 494.49 g of NaCl are present in the solution.
The mass of NaCl in 3.140 molal NaCl solution has been 494.493 grams.
Molality can be defined as the mass of solute present in 1000 grams of solvent.
Molality = [tex]\rm \dfrac{moles\;of\;solute}{mass\;of\;solvent\;(kg)}[/tex]
The moles of NaCl has been calculated as;
3.140 = [tex]\rm \dfrac{moles\;of\;NaCl}{mass\;of\;water\;(kg)}[/tex]
3.140 = [tex]\rm \dfrac{moles\;of\;NaCl}{2.692\;kg}[/tex]
Moles of NaCl = 3.140 [tex]\times[/tex] 2.692
Moles of NaCl = 8.45288 mol
The moles can be expressed as;
Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
Molecular weight of NaCl = 58.5 g/mol
The mass of NaCl can be calculated as:
8.45288 mol = [tex]\rm \dfrac{mass\;of\;NaCl}{58.5\;g/mol}[/tex]
Mass of NaCl = 58.5 g/mol [tex]\times[/tex] 8.45288 mol
Mass of NaCl = 494.493 grams.
The mass of NaCl in 3.140 molal NaCl solution has been 494.493 grams.
For more information about molality, refer to the link;
https://brainly.com/question/4580605