Calculate relative mass of chlorine and boron by the help of given data Only 30 mins are left

Answer:the surrounding air

Explanation:

A burner at the sanem temperature would not receive a flow of heat, a pan heated to 100 degrees will transfer heat to the stovetop, and hotter water inside a pan will not take the heat either because it is hotter. the surrounding air is colder and will take heat from the burner

Answer:

surrounding air

Explanation:

taking test too

Answer:

A

Explanation:

The reason it is distillation is due to the fact that we can use distillation to heat the ocean water. As water has a lower boiling point than the salt solution, it evaporates and the salt stays behind.

Molecules of glucose (blood sugar) contain 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms.

Hope this helped :)

Answer:

C

Explanation:

plum- pudding atomic model is an atom that had a positively charged medium, or space, with negatively charged electrons inside the medium.

The correct answer is (A) A description of atoms being balls of positive charge with electrons scattered outside.

Option (A) is correct because the atom was a sphere of positive charge with negatively charged electrons scattered around the atom like plums in a pudding.

So , Rest  options that are B , C and D are incorrect.

Learn more about Plum pudding model below

https://brainly.com/question/15126038

#SPJ2

Answer:

FeO(s)+2NaCL(aq)>FeCL2(aq)+Na2O(s)

2 moles of sodium chloride react with 1 mole of iron (II) oxide to give 1 mole of iron (II) chlorine

mole ratio NaCl :FeCl=2:1

mass of FeCl=0.5×450=225g

Explanation:

(

Answer:

I believe the answer is A

Explanation:

Work and energy are related because when you work, you cause displacement in the object you are exerting upon. While this happens, you transfer energy between the systems. Both work and energy share the same SI unit, called the joule.

Answer:

Increase in the color intensity and hence the concentration of the reacting species increases the rate of the reaction according to collision theory

Explanation:

The given parameters are;

Rate of reaction of metal strip in light blue solution lesser than rate  of reaction of the metal strip in dark blue solution

Therefore, the color of the solution derives from the concentration of the reacting species involved in the reaction.

The increase in the darkness of the blue solution stems from the increase in the concentration of the reacting species which according to collision theory increases the fraction of the effective collisions, thereby increasing the reaction rate.

Answer:

A.Mid ocean ridge i think

Explanation:

your answer is B my guy

Answer:

4,768.57

Explanation:

If you are asking us to calculate, your answer is above. Easiest and fastest way is to plug it into the calc.

Answer:

[tex]P_{N_2}=285 torr[/tex]

Explanation:

Given that

Volume of cylinder = 3 L

Temperature= 25 degrees

Partial pressure of the gases

[tex]P_{He}=115 torr[/tex]

[tex]P_{N_2}=285 torr[/tex]

[tex]P_{Ar}=325 torr[/tex]

By using Dalton's law , the total pressure of the non reacting gas is the sum of the partial pressure of all gases.

[tex]P_{total}=P_{He}+P_{N_2}+P_{Ar}[/tex]

[tex]P_{total}=115+285+325=725 torr[/tex]

When all the He gas will removed then partial pressure of He will be zero.

[tex]P_{total}=P_P_{N_2}+P_{Ar}[/tex]

[tex]P_{total}=285+325=610 torr[/tex]

Partial pressure of N₂

[tex]P_{N_2}=610-325=285 torr[/tex]

[tex]P_{N_2}=285 torr[/tex]

Answer:

Total mass =  93.21 gram (Approx)

Step-by-step explanation:

Given:

Atoms of Cl = 6.3 × 10²³

Find:

Amount of AuCl₂

Computation:

Molecules of AuCl₂ = 6.3 × 10²³ / 2 = 3.15 × 10²³

1 mol of AuCl₂ = 6.022 × 10²³ molecules

Number of mol = 3.15 × 10²³ /  6.022 × 10²³

Number of mol  = 0.523 mol

So,

Molar mass of AuCl₂ = 267.87 g/mol

Total mass = 0.348 mol × 267.87 g/mol

Total mass =  93.21 gram (Approx)

Answer:

A. Michael suggests timing each addition of sugar

Explanation:

The experiment is about amount of sugar dissolved at different temperatures. The suggestion of Michael is best suited to record the timing of each addition of sugar. This will enable to record the timing of sugar added in the water and amount of sugar dissolved at the specified temperature.

Answer:

24 atoms makes altogether a molecule of glucose

Answer:

Element x has an atomic number of 16, it is sulphur.

Element Y has an atomic number of 20, it is calcium.

i) Sulphur is in Group VI, period 3 in the modern periodic table,

whereas calcium is in Group II, period 4 of the modern periodic table.

ii) Ionic bonds will form between them. This is because metals and non-metals (Cacium and sulphur) usually form ionic compounds where between the ions are held by ionic bonds (which are transferred electrons so that both elements can attain a stable status).

iii) CaS

each Calcium atom can lose 2 electrons to attain 8 outermost shell electrons, while each sulphur atom can gain the 2 electrons to attain 8 outermost shell electrons, where they will most be stable (octet). Hence, the atomic ratio of Ca and S is 1:1.

i) The element with atomic number 16 is sulfur present in group 16 and period 3rd and the element with atomic number 20 is calcium present in group 2 and period 4th.

ii) The ionic bond formed between them.

ii) The chemical formula of the compound will be CaS.

Ionic compounds can be described as crystalline solids formed by closely packed ions of opposite charge. An Ionic compound is generally formed when metal reacts with non-metal.

In ionic compounds, the ions are commonly held together by ionic bonds. The ions are formed by gaining or losing electrons in order to achieve their nearest noble gas configuration.

In a reaction, the metals usually lose electrons to complete their octet while non-metals will gain electrons to complete their octet.

The given element calcium is a metal with a valency of +2 and sulfur is a non metal with a valency of -2. Therefore, they form an ionic compound with the chemical formula CaS.

Learn more about ionic compounds, here:

https://brainly.com/question/17217225

#SPJ2

Answer:

A = 1.6

B = 3

Explanation:

When you are dividing exponents, you subtract them:

10^12 / 10^9 = 12 - 9 = 3

10³ would be the exponent

5.6/3.5 = 1.6

So, 1.6(10³) would be your answer.

Answer:

3.25 moles of H2O

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2HCl + Ca(OH)2 —> CaCl2 +2H2O

Now, we can obtain the number of mole H2O produced from the reaction as follow:

From the balanced equation above,

2 moles of HCl reacted to produce 2 moles of H2O.

Therefore, 3.25 moles of HCl will also react to produce 3.25 moles of H2O.

Therefore, 3.25 moles of H2O were produced from the reaction.

Answer: Function

Explanation: Zinc is found in cells throughout the body.

It is needed for the body's defensive (immune) system to properly work.

It plays a role in cell division, cell growth, wound healing, and the breakdown of carbohydrates.

Answer:

Explanation:

Synthetic fibres are made using chemicals. Hence they do not require any forest resources like wood. This helps in saving the trees from cutting down. So the production of synthetic fibers helps in the conservation of forests.

Natural fibres on the other hand require forest products like wood for its manufacture.

Hope this helps

plz mark it as brainliest!!!!!!!!!

Answer:

yes, they do help in conservating the forest resources.

Explanation: This is because synthetic fibers like rayon, nylon etc are made from petrochemicals which helps to substitute usage of natural resources like cotton etc. and these synthetic fibers are more durable than natural fibers, which adds to their usage and in turn, helps to conserve forest resources.

Answer:

C2H3O2^-(aq) + H^+ —> HC2H3O2

Explanation:

The following equation was given in the question:

Na^+ + C2H3O2^-(aq) + H^+ Cl^- —> Na^+ + Cl^- + HC2H3O2

Now, to obtain the net ionic equation, we simply cancel out the ions common to both side of the equation.

A careful observation of the equation above, shows that sodium ion, Na^+ and chloride ion, Cl^- are common to both side of the equation.

Therefore, to obtain the net ionic equation, we simply cancel out Na^+ and Cl^- from both side of the equation. This is illustrated below:

Na^+ + C2H3O2^-(aq) + H^+ Cl^- —> Na^+ + Cl^- + HC2H3O2

C2H3O2^-(aq) + H^+ —> HC2H3O2

Therefore, the net ionic equation is

C2H3O2^-(aq) + H^+ —> HC2H3O2

Answer:

hydrocarbon

Explanation:

these are called hydrocarbons

The commercial technology that uses plasmas is C. A television.

Plasma is a state of matter that is similar to gas, but the atoms are ionized, meaning that they have lost or gained electrons. Plasmas are used in a variety of commercial technologies, including:

Plasma TVs use plasma to create images. The plasma is contained in a thin layer of gas between two glass plates. When an electric field is applied to the plasma, it emits light. The color of the light depends on the type of gas used.

Plasma lamps are used in a variety of lighting applications, including streetlights, headlights, and backlighting for LCD displays.

Find out more on plasmas at https://brainly.com/question/18207038

#SPJ6

Answer:

c.is the answer..not sure...but i think so

Answer:

Place the reactants in a smaller container.

Explanation:

If you were to reduce the source of heat, the hydrogen and oxygen molecules would lose their kinetic energy, resulting in less collisions.

_______________________________________________________

Maintaining the same temperature of the reactants, the speed would neither increase nor decrease as temperature is directly proportional to the kinetic energy of the molecules, which in turn is directly proportional to the number of collisions. However, placing the reactants in a smaller container would result in less volume, and hence the molecules would collide with one another more often!

Hope that helps!

The primary requirement of a reaction to occur is that the reactant particles must collide and interact with each other in some way. Place the reactants in a smaller container which speed up the collisions between hydrogen and oxygen molecule. The correct option is C.

The collision theory states that the rate of a chemical reaction is proportional to the number of collisions between the reactant molecules. The more often reactant molecules collide, the more often they react with one another and faster will be the reaction rate.

If we reduce the source of heat, the hydrogen and oxygen molecules would lose their kinetic energy, resulting in less collisions. The temperature is directly proportional to the kinetic energy of the molecules, which in turn is directly proportional to the number of collisions.

If we place the reactants in a smaller container it would result in less volume, and hence the molecules would collide with one another more often.

Thus the correct option is C.

To know more about collision, visit;

https://brainly.com/question/24616147

#SPJ7

Answer:

Explanation:

Anionic polymerization and cationic polymerization are two types of chain growth polymerization reactions which are used to synthesize various types of polymers. Both these reactions have the same reaction mechanism, but the reaction initiator is different. Anionic polymerization reactions are initiated by an active anionic species, whereas the cationic polymerization reactions are initiated by an active cationic species.

hope this helps

plz mark it as brainliest\

Answer:

The answer is option A.

its reactivity

I hope this helps you.

Answer:

A) Reactivity

Explanation:

Reactivity is one of the characteristics of a chemical property. The copper that turned color due to air, has a different chemical composition.

It wouldn't be flammability - even though it is a chemical property, but nothing is burning.

All the other answer choises: mass and volume are physical properties. Basically the PHYSICAL characteristics which doesn't change the composition.

Hope this helps!

Answer:

Option D. fluorine-18

Explanation:

The attached photo gives the explanation.

In the attached photo, A zX represent the atom that will undergo beta decay to produce oxygen–18.

After the calculation, A zX was found to be fluorine–18.

Answer:

79.8%

Explanation:

Percentage yield = actual yield / theoretical yield x 100%

Percentage yield = 220.0 / 275.6 x 100%

=79.8%

The percent yield of of ferrous sulfide if the actual yield is 220.0 g and the theoretical yield is 275.6 g is 79.8%.

Percent yield is defined as the ratio of actual yield to the theoretical yield multiplied by 100. If the actual and theoretical yield are same then the percent yield is 100%.If actual yield is less than the theoretical yield then the percent yield is less than 100%.Reason of this condition arising is the incompletion of reaction or loss of sample during recovery process.

In cases where percent yield is over 100% it indicates that more sample is recovered than the predicted amount.This condition arises when there are other simultaneous reactions taking place leading to the formation of product. It can also arise if there is incomplete removal of impurities from the sample .

In the given example, percent yield can be found out by substituting values in mentioned formula. percent yield,=220/275.6×100=79.8%.

Learn more about percent yield,here:

https://brainly.com/question/2506978

#SPJ5

Answer:

that by living near the poles, people might be able to survive on Mars

Explanation:

Answer:

1) high pH is required

2) other ions are precipitated along with the strontium ions

Explanation:

According to the solubility rules all phosphates are insoluble except those of sodium, potassium, and ammonium. This implies that strontium phosphate is insoluble in water. This explains why strontium ions can be precipitated from drinking water supply using phosphate. The main problem with the precipitation of strontium using phosphate is that it usually requires a high pH as the precipitation occurs under very alkaline conditions.

The main reason why the results may not be accurate is that other ions are precipitated along with the strontium such as calcium ions and magnesium ions. This may lead to inaccurate determination of the amount of strontium ions present.

Answer:

Explanation:

The fundamental issue for precipitation of Strontium Phosphate, is that the other metal cations (Calcium, Barium, Iron, and so on.), present in the town water, are likewise encouraged as Phosphate. In this manner, alongside Strontium Phosphate, Phosphates of a few different cations are additionally encouraged. In this way, Strontium Phosphate can't be weighed precisely. This will prompt off base outcomes.  

The response will be Exothermic, if the temperature of response increments.

Explanation:

Density = mass / volume

ρ = 640 g / (4 cm)³

ρ = 10 g/cm³