Calculate ΔG (in kJ) for the following reaction at 1.0 atm for C2H6, 0.5 atm for O2, and 2.0 atm for CO2, and 25 oC: C2H6 (g) + O2 (g) ---> CO2 (g) + H2O (l) (unbalanced) ΔGfo C2H6 (g) = - 32.89 kJ/mol; ΔGfo CO2 (g) = - 394.4 kJ/mol; ΔGfo H2O (l) = - 237.13 kJ/mol

Answer:

Explanation:

Stereoisomers are two or more atoms that  have the same bonding order of atoms but there is a difference  spatial arrangement of  the  atoms in space.

A plane of symmetry divides a molecule into two equal halves.

A chiral stereoisomer are not superimposed on a mirror image , Hence they do not posses a plane of symmetry.

As a result to that. these non-superimposable mirror images are said to be Enantiomers.

However, a Fischer Projection emanates from a two - dimensional figure which is used for presenting a three - dimensional organic molecules.

From the given question;

Fischer projection for an enantiomer of 2-bromo-2,3-dihydroxypropanal with the bromine oriented horizontally to the left and the hydroxide group oriented horizontally to the right.

we can sketch the way the enantiomer of 2-bromo-2,3-dihydroxypropanal can  be seen like the one shown below:

              CH₂OH

                   |

                   |

                   |

Br -------------|----------------OH

                   |

                   |

                   |

                 CHO

The objective of this question is to drawn the perspective formula of the molecule.

So , from the attached file below; we can see the perspective formula of the molecule in a well structured 3-D format.

Answer:

[Ne]3s²

Explanation:

Mg

1s2 2s2 2p6 3s2   or [Ne]3s²

Abbreviated electronic configuration of magnesium is [Ne]3 s² and in complete form it is 1 s² 2 s² 2 p⁶ 3 s².

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.

Learn more about electronic configuration,here:

https://brainly.com/question/13497372

#SPJ5

Answer:

Explanation:

1. A student mixes baking soda and vinegar in a glass. The results are shown at left. ... Yes I do belive that new substances are being formed because there is a chemical reaction between the baking soda and vinegar turning it into a bubbly substances instead of a powder and liquid.

Yes, there are new substances created from this mixture.

Answer:

An ion is an atom that has lost or gained one or more electrons.

Explanation:

Ions are positively or negatively charged atoms of elements. This is because they can give, take, or share electrons with other elements to encourage the formation of chemical bonds.

Protons are what decide the chemical identity of the element. So, for example, if an atom has 11 protons, we know that will be a Sodium (Na) atom. A loss or gain of protons completely changes the chemical identity of the element and it will then become another element.

Electrons are what give an atom a neutral electrical charge (if that atom has the number of protons and neutrons normally described for the element - otherwise, a discrepancy or gain in neutrons is referred to as an isotope and declares that ions have nothing to do with the mass of an element).

With this information, you can realize that neutrons and protons have nothing to do with ions and you can confirm that ions are atoms that have lost or gained one or more electrons.

Answer:

HCO3- (aq) + H2O (I) <--> H2CO3 (aq) + OH- (aq)

Explanation:

The equation to distinguish between cation and anion hydrolysis is given below :  

HCO3- (aq) + H2O (I) <--> H2CO3 (aq) + OH- (aq)

The important thing to remember is their origin. The anions can react with water and can produce hydroxide ions while hydroxide ions make a solution basic.

Answer:

K₂SO₄ + Pb(C₂H₃O₂)₂ →PbSO₄ + 2KC₂H₃O₂

A chemical equation is a symbolic representation of a chemical reaction. The chemical equation for the reaction between potassium sulfate ([tex]K_2SO_4[/tex]) and lead(II) acetate ([tex]Pb(CH_3COO)_2[/tex]) can be written as follows:

[tex]K_2SO_4 + Pb(CH_3COO)_2 = PbSO_4 + 2CH_3COOK[/tex]

A basic chemical equation consists of two main parts: the reactant side (left side) and the product side (right side), separated by an arrow indicating the direction of the reaction. Reactants are substances that undergo a chemical change, while products are substances formed as a result of the reaction.

In this reaction, potassium sulfate reacts with lead(II) acetate to form lead(II) sulfate and potassium acetate. It is important to note that the equation is balanced with stoichiometric coefficients, ensuring that the number of atoms of each element is the same on both sides of the equation.

Therefore, the chemical equation for the reaction between potassium sulfate ([tex]K_2SO_4[/tex]) and lead(II) acetate ([tex]Pb(CH_3COO)_2[/tex]) can be written as follows:

[tex]K_2SO_4 + Pb(CH_3COO)_2 = PbSO_4 + 2CH_3COOK[/tex]

For more details regarding chemical equations, visit:

https://brainly.com/question/28792948

#SPJ6

Answer:

35.578g or 36g if you round

Explanation:

Q=mc ∆∅ where ∅ is temperature difference

1160= m x 1.716 x (42-23)

m = 1160/ 1.716 x19

m=35.578g

m = 36g to nearest whole number

Answer: C. 36 g

Explanation: I got this right on Edmentum.

Answer:

a) HC₂H₃O₂, C₂H₃O₂⁻, H₃O⁺, H₂O, OH⁻

b) HC₂H₃O₂ + LiOH ⇄ H₂O + LiC₂H₃O₂

c) C₂H₃O₂⁻ + HBr ⇄ HC₂H₃O₂ + Br⁻

Explanation:

a) In a HC₂H₃O₂/C₂H₃O₂⁻ buffer system, the following reactions take place:

HC₂H₃O₂ + H₂O ⇄ C₂H₃O₂⁻ + H₃O⁺

C₂H₃O₂⁻ + H₂O ⇄ HC₂H₃O₂ + OH⁻

Thus, the species present are: HC₂H₃O₂, C₂H₃O₂⁻, H₃O⁺, H₂O, OH⁻.

b) When LiOH is added to the buffer system, it is partially neutralized according to the following equation.

HC₂H₃O₂ + LiOH ⇄ H₂O + LiC₂H₃O₂

c) When HBr is added to the buffer system, it is partially neutralized according to the following equation.

C₂H₃O₂⁻ + HBr ⇄ HC₂H₃O₂ + Br⁻

Answer:

0.0025Litters

Explanation:

2.5ml= 2.5x10^-3l

2.5ml= 0.0025l

Answer:

AAAAAAAA

Explanation:

Answer:

Rate of diffusion is same .

Explanation:

As we know that Rate of the diffusion is directly proportional to the [tex]\frac{1}{\sqrt{M} }[/tex] .They have same mass if there is same rate and similar condition therefore the mass of carbon (iv) oxide,propane and nitrogen (i) oxide will be similar.

Answer:

31.2g

Explanation:

The following data were obtained from the question:

Volume of bromine = 10mL

Density of bromine = 3.12 g/mL

Mass of bromine =...?

The Density of the substance is related to it's mass and volume by the following equation:

Density = Mass /volume

With the above equation, we can calculate the mass of bromine as follow:

Density = Mass /volume

Volume of bromine = 10mL

Density of bromine = 3.12 g/mL

Mass of bromine =...?

Density = Mass /volume

3.12 = Mass /10

Cross multiply

Mass of bromine = 3.12 x 10

Mass of bromine = 31.2g

Therefore, the mass of bromine is 31.2g

Answer:

It was because the vaccine generated actively acquired immunity, that is, inoculation of a portion of the measles virus so that the body forms the antibodies for a second contact and thus can destroy it without triggering the pathology.

Explanation:

Vaccines are methods of active acquired immunity since the antibody is not passively inoculated, it is manufactured by the body with a physiological process once part of the virus is inoculated.

The measles virus most of all affected the lives of infants or newborn children with severe rashes and high fevers that led to death.

Answer:

K = 150, C = - 123.15°

Explanation:

Kelvin = Celcius + 273.15 / 0 Kelvin = - 273.14 C

_____________________________________

Thus,

150 K = Celcius + 273.15,

150 - 273.15 = C,

C = -123.15 degrees

Solution, C = - 123.15°

Answer:

C=-123.15

Explanation:

This is easy

Answer:

a) Fe(s) + Ni^2+(aq) ----> Fe^2+(aq) + Ni(s)

b) no reaction

c) no reaction

d) 2Mg(s) + 2H2O(l)-----> 2Mg^2+(aq) + O2(g) +4H^+(aq)

e) no reaction

Explanation:

It is important to say here that the ability of a particular chemical specie to displace another chemical specie is dependent on the relative standard reduction potentials of the species involved.

All the reactions stated above are redox reactions. Let us take reaction E as an example. Mg^2+ has a reduction potential of -2.37 V while Cr^3+ has a reduction potential of -0.74V. Since the reduction potential of magnesium is more negative than that of chromium, there is no reaction when a piece of chromium metal is dipped into a solution of Mg^2+.

Similarly, though metals displace hydrogen gas from dilute acids, metals that are less than hydrogen in the reactivity series cannot do that. This explains why there is no reaction when copper and silver are dipped into dilute acid solutions.

Reaction occurs when iron is dipped into a nickel solution because the reduction potential of Fe^2+ is far more negative than that of Ni^2+.

Answer:

- Both energy and matter cannot be neither created nor destroyed.

- An equilibrium temperature will be reached.

Explanation:

Hello,

In this case, the law of conservation is applied to both matter and energy, and it states that both energy and matter cannot be neither created nor destroyed. Specifically, in chemical reactions, it states that in closed systems, the mass of the reactants equals the mass of the products even when the number of moles change. Moreover, for energy, if two substances at different temperatures come into contact, the hot one will cool down and the cold one will heat up until an equilibrium temperature so the energy lost by the hot one is gained by the cold one, which accounts for the transformation of energy.

Best regards.

Answer:

Explanation:

Hello,

We'll be doing some classification of some chemical substances based on molecules, elemental state or ionic or electrovalent properties.

A) Ag = atomic element : silver (Ag) in its elemental state is an atomic element.

B) Cd = atomic element : Cadmium (Cd) is an element of the periodic table and belongs to transition metal.

C) MgCl = ionic compounds: this is a compound formed between magnesium (Mg) and chlorine (Cl) to give MgCl. This compound has ionic or electrovalent properties since electron transfer occurred between the cation (Mg) and anion (Cl).

D) F₂ = moleculer element : Fluorine F₂ is moleculer element since two elements of fluorine combine together to form a molecule.

E) HI = molecular compound : this is a compound formed from the reaction between hydrogen and iodine. It's a molecular compound because they are two different elements combining together to form a compound.

F) NO₂ = molecular compound

G) NaCl = ionic compound

H) Cl₂ = molecular element

Answer:

Concentration of the H₂SO₄ solution is 0.0737 M

Explanation:

Equation of the neutralization reaction between the acid, H₂SO₄, and the base, NaOH, is given below:

H₂SO₄ + 2NaOH -----> Na₂SO₄ + 2H₂O

From the above equation, one mole of acid requires 2 moles of base for complete neutralization which occurs at phenolphthalein endpoint.

mole ratio of acid to base, nA/nB = 1:2

Concentration of the base, Cb = 0.1311 M

Volume of base, Vb, = 28.11 mL

Concentration of acid, Ca = ?

Volume of acid, Va + 25.0 mL

Using the formula, CaVa/CbVb = nA/nB

making Ca subject of the formula, Ca = Cb*Vb*nA/Va*nB

substituting the values into the equation

Ca = (0.1311 * 28.11 * 1) / 25.0 * 2 = 0.0737 M

Therefore, concentration of the H₂SO₄ solution is 0.0737 M

Answer:

D. rate = k [(CH3)3CCl]

Explanation:

(CH3)3CCl + OH- → (CH3)3COH + Cl-

The mechanisms are;

Step 1)

(CH3)3CCl → (CH3)3C+ + Cl- (slow)

Step 2)

(CH3)3C+ + OH- → (CH3)3COH (fast)

In kinetics, the slowest step is the ratee determining step.

For a given reaction;

A → B + C, the rate law expression is given as;

rate = k [A]

In this problem, from step 1. The rate expression is;

rate = k [(CH3)3CCl]

Answer: HZ > HX > HY in order of decreasing strengths.

Explanation: Generally, the rule is that the stronger the acid, the weaker its conjugate base and vice versa; same rule applies for bases and their conjugate acids.

So the weakest base Z- would have the strongest conjugate acid. Consequently, the strongest base Y- would have the weakest conjugate acid.

I hope this was MORE helpful as this is the correct answer.

The ranking of the conjugate acids in order of decreasing strength (i.e from strongest to weakest) is; HZ < HX < HY

First we must know that the stronger a base is, the weaker is it's conjugate acid and the weaker a base is, the stronger is it's conjugate acid.

Therefore, the order of decreasing strength of the conjugate acid is; HZ < HX < HY

Read more:

https://brainly.com/question/23917439

Answer:

The lock-and-key model:

c. Enzyme active site has a rigid structure complementary

The induced-fit model:

a. Enzyme conformation changes when it binds the substrate so the active site fits the substrate.

Common to both The lock-and-key model and The induced-fit model:

b. Substrate binds to the enzyme at the active site, forming an enzyme-substrate complex.

d. Substrate binds to the enzyme through non-covalent interactions

Explanation:

Generally, the catalytic power of enzymes are due to transient covalent bonds formed between an enzyme's catalytic functional group and a substrate as well as non-covalent interactions between substrate and enzyme which lowers the activation energy of the reaction. This applies to both the lock-and-key model as well as induced-fit mode of enzyme catalysis.

The lock and key model of enzyme catalysis and specificity proposes that enzymes are structurally complementary to their substrates such that they fit like a lock and key. This complementary nature of the enzyme and its substrates ensures that only a substrate that is complementary to the enzyme's active site can bind to it for catalysis to proceed. this is known as the specificity of an enzyme to a particular substrate.

The induced-fit mode proposes that binding of substrate to the active site of an enzyme induces conformational changes in the enzyme which better positions various functional groups on the enzyme into the proper position to catalyse the reaction.

Answer:

B. PROTONS EXHIBIT STRONGER PULL ON OUTER f ORBITALS

Explanation:

Lanthanide contraction is the greater than normal decrease in the ionic radius of the lanthanide series from atomic number 57 to atomic number 71. This decrease is rather not expected of the ionic radii of these elements and they result in the greater decrease in the subsequent series of the lanthanides from the atomic number 72. The cause of which is as a result of the poor shielding effects of the nuclear charge around the electrons of the f orbitals. So therefore, protons are strongly pulled out of the 4f orbital and as a result of the poor shielding effect which causes the electrons of the 6s orbitals to be drawn more closer to the nucleus and hence resulting in a smaller atomic radii. It is worthy to note that the shielding effects of the inner electrons decreasing from s orbital to the f orbital; that is s > p > d > f. So from the decrease in the shielding effects from s to the f orbitals, lanthanide contraction results from the inability of the orbitals far away from s like the 4f orbiatls to shield the outermost shells of the lanthanide elements. So the cause of lanthanide contraction is the action of the protons which strongly pull the electrons of the f orbitals because of the poor shielding effects due to the distance of this orbital from the nucleus.

Answer:

B) Protons exhibit a stronger pull on outer f orbitals than on d orbitals.

Explanation:

Answer:

Sr

Explanation:

Sr has an ionization of 550 whereas Ba has an ionization of 503

Answer:

n=2 to n=4 < n=6 to n=8 < n=10 to n=12 < n=14 to n=16

Explanation:

According to Neils Bohr, electrons in an atom are found in specified energy levels. Transitions are possible from one energy level to another when the electron receives sufficient energy usually in the form of a photon of electromagnetic radiation of appropriate frequency and wavelength. The energy of this photon corresponds to the energy difference between the two energy levels. Thus the higher the energy difference between energy levels, the greater the energy of the photon required to cause the transition and the shorter the wavelength of the photon.

High energy photons have a very short wavelength. It should be noted that as n increases, the energy of successive energy levels decreases and transitions between them now occurs at longer wavelengths. Hence, the highest energy and shortest wavelength of photons are required for transition involving lower values of n because such electrons are closer to the nucleus and are more tightly bound to it than electrons found at a greater distance from the nucleus.

Hence transition involving electrons at higher energy levels occur at a longer wavelength compared to transition involving electrons closer to the nucleus. This is the basis for the arrangement of wavelengths required to effect the various electronic transitions shown in the answer.

Answer:

-30.7 kj/mol

Explanation:

The standard free energy for the given reaction that is the hydrolysis of ATP is calculated using the formula:  ∆Go ’= -RTln K’eq

where,  

R = -8.315 J / mo

T = 298 K

For reaction,

1. K′eq1=270,

∆Go ’= -RTln K’eq

= - 8.315 x 298 x ln 270

=  - 8.315 x 298 x 5.59

= - 13,851.293 J / mo

= - 13.85 kj/mol

2. K′eq2=890

∆Go ’= -RTln K’eq

= - 8.315 x 298 x ln 890

=  - 8.315 x 298 x 6.79

=  - 16.82 kj/mol

therefore, total standard free energy

= - 13.85 + (-16.82)

=  -30.7 kj/mol

Thus, -30.7 kj/mol is the correct answer.

Answer:potassium is more reactive than Mg because both lie in the same group and the element potassium has more electropositivity than magnesium

Explanation:

I hope it will help you

Answer: B. Potassium(K)

Explanation: