Answer:
the answer of this question is true
Will mark brainliest
Calculate the specific heat of a substance given that 512 joules of heat is required to raise the temperature of 255.0 g of the substance by 15.0 ºC.
Answer:
[tex]c=0.133\ J/g^{\circ}C[/tex]
Explanation:
Given that,
Heat required, Q = 512 J
Mass of the substance, m = 255 g
The change in temperature, [tex]\Delta T=15^{\circ} C[/tex]
Let c be the specific heat of the substance. We know that the heat required to raise the temperature is given by :
[tex]Q=mc\Delta T[/tex]
Where
c is the specific heat of a substance
So,
[tex]c=\dfrac{Q}{m\Delta T}\\\\=\dfrac{512}{255\times 15}\\\\c=0.133\ J/g^{\circ}C[/tex]
So, the specific heat of the substance is equal to [tex]0.133\ J/g^{\circ}C[/tex].
Assuming a half life of 1599 years, how many years will be needed for the decay of 15/16 of given amount of radium-226
Answer:
1
Explanation:
What is the hydrogen ion concentration of a solution with pH=7.75 ?
Answer:
[tex][H^+]=1.78x10^{-8}M[/tex]
Explanation:
Hello there!
In this case, according to the given information about the pH, it is firstly necessary for us to remember that the pH is defined as the potential of the hydrogen ions in the solution and the concentration of those ions represents how many of them are present in the solution; in such a way, it is possible for us use:
[tex]pH=-log([H^+])[/tex]
Whereas the concentration of hydrogen ions can be calculated as follows:
[tex][H^+]=10^{-pH}[/tex]
So we plug in the given pH to obtain:
[tex][H^+]=10^{-7.75}=1.78x10^{-8}M[/tex]
Regards!
2. According to decreasing ionization energy
Cr
со
Fe
V
Mn
Answer: V, Mn, Cr, Fe, Co
Explanation: all elements belong to 4th period. Ionization energy increases from
Left to right
How many L of 3.0M solution
can be made with 78g of
NaCl?
Answer:
Need to find moles NaCl.
526 grams NaCl (1 mole NaCl/58.44 grams)
= 9.0 moles NaCl
----------------------------------------------------
now,
Molarity = moles of solute/Liters of solution
or, for our purposes
Liters of solution = moles of solute/Molarity
Liters of solution = 9.0 moles NaCl/3.0 M
= 3.0 liters in volume
What is all the colors in a rainbow
Answer:
Red, orange, yellow, green, blue, indigo, violet.
Explanation:
Answer:
Red, orange, yellow, green, blue, purple, violet.
Explanation:
Write the structure of all possible peptides containing these amino acids: Asp, Glu, Gln Use single letter abbreviations and capital letters only; i.e. GYR, not Gly-Tyr-Arg. If there are fewer than 6 peptides, leave an appropriate number of answer boxes empty. fill in the blank 1 , fill in the blank 2 , fill in the blank 3 , fill in the blank 4 , fill in the blank 5 , fill in the blank 6
Answer:
QED, EDQ, DQE, EQD, DEQ, QDE
Explanation:
The structure of all possible peptides that contain the given amino acids are :
QED, EDQ, DQE, EQD, DEQ, QDE
where : Asp is represented by the letter code D
Glu is represented by the letter code E
Gln is represented by the letter code Q
Note : when three amino acids combine they form what is known as tripeptide ( i.e. contains two peptide linkages ) while a peptide linkage is been formed by the combination of a carboxyl group of an amino acid and the amino group of different amino acid
Transparency is a ____
of matter.
property
substance
type
Answer: -property
Explanation: Transparency is a property of matter.
Answer: property i think
Explanation:
1. What would happen to an inflated balloon it were to be placed in a cold environment?
The balloon would inflate more
The balloon would pop
The balloon would float away
The balloon would deflate
Answer:
The balloon would deflate
Explanation:
Please help will give brainliest to right answer!!
You add 1.5 moles of HF to 6 liters of water. The concentration is at equilibrium when [H+] is at 0.10 M. What is the Ka of HF? HF -> H+ + F-.
A) 0.067
B) 0.10
C) 0.25
D) 1.5
Answer:
C
Explanation:
NP
What is the mass of 7.03 x 10- molecules of magnesium nitrate?
Answer:
173.5 g
Explanation:
This question seems incomplete, as the power by which 10 is increased is missing. I will answer this question assuming the given number of molecules is 7.03x10²³ molecules. A different number of molecules will give a different answer, but the procedure remains the same.
First we convert the given number of molecules into moles, using Avogadro's number:
7.03x10²³ molecules ÷ 6.023x10²³ molecules/mol = 1.17 molThen we convert magnesium nitrate moles into grams, using its molar mass:
1.17 mol * 148.3 g/mol = 173.5 g1. Alexa and her family travelled 5 hours south east on 1-45 to crystal
beach this summer for vacation. If the trip was a total of 340 miles,
what was her average speed?
EQUATION
PLUG N NUMBERS
INTO THE EQUSTION
ENALANSWER WITH
UNTS
Answer:
Average speed = 68 mph
Explanation:
Given that,
Total distance traveled by the family, d = 340 miles
The family traveled 5 hours southeast.
We need to find her average speed. The speed of an object is given by the total distance covered divided by time taken. So,
[tex]v=\dfrac{d}{t}[/tex]
Put all the values,
[tex]v=\dfrac{340}{5}\\\\v=68\ mph[/tex]
So, her average speed is equal to 68 mph.
PLEASE HURRY I WILL GIVE BRAINYEST
Where are the majority of temperate grasslands located?
A interiors of continents
B along the coastline
C in desert regions
D between mountain ranges
Answer:
D. Between mountain ranges
Explanation:
Usually in between mountains is where the most grass is.
Answer:
in the interior of continents
Explanation:
How do you calibrate an electronic analytical balance
Explanation:
For the calibration process, use a weight that is 50% of the scale's capacity for accurate calibration. Weights less than 10% can result in inaccuracy. Make sure that the scale doesn't have any weights placed on it and nothing is rubbing against the scale or the platform.
Which type of reaction is represented by this graph?
Potential energy
Reaction progress
A. Synthesis
B. Endothermic
C. Decomposition
D. Exothermic
Answer:
D. Exothermic .
Explanation:
Hello there!
In this case, since the potential energy versus reaction progress diagrams are related to the energetic profile of a chemical reaction, we can set the initial point at the beginning of the reaction as the energy of the reactants and the final point as the energy of the products.
Next, since the change in the enthalpy of a reaction is quantified by subtracting products minus reactants, we can see that the products have less energy than the reactants and therefore ΔH for this reaction is negative, which matches with the definition of D. Exothermic reaction.
Regards!
The titration of HCl with NaOH is an example of:
A. a weak acid-weak base titration,
B. a weak acid-strong base titration.
c. a strong acid-strong base titration.
D. a strong acid-weak base titration.
Answer:
I’m pretty sure it’s C
Explanation:
AP Ex
Se prepara una concentración molar 0.5M de hidróxido de sodio (NaCH) con la finalidad de determinar el grado de acidez de una bebida embotellada. Calcula la cantidad de gramos de hidróxido de sodio (NaCH) que se requiere para preparar 5 litros de dicha solución.
Answer:
100 g
Explanation:
Primero hay que calcular el número requerido de moles de NaOH, usando la definición de molaridad:
Molaridad = moles / litros0.5 M = moles / 5 Lmoles = 2.5 molesAhora hay que convertir 2.5 moles de NaOH en gramos, usando su masa molecular:
2.5 mol * 40 g/mol = 100 gSe requieren 100 gramos de NaOH.
A binary covalent bond exists between
A.any element
B.2 nonmetals
C.1met and 1 nonmetal
D.2 metals
Answer:
B
Explanation:
Double Covalent bonds or as you say "binary" bonds consists of 2 non-metals only, nothing else.
Hope this helps!
propan-2-ol added to butanoic acid
A newborn blue whale measures 6.0 to 7.9 m long and weighs up to 3003 kg. The blue whale produces the loudest sound by any living animal, 188 dB and can be detected as far as 850 000 m away. What is the total number of significant figures in all these trivia?
PLEASEEE HELPPP WILL MARK BRAINLIEST FOR RIGHT ANSWER!!!
You have an unknown concentration of 0.035 L of HCl acid and added 0.033 L of 0.3 M NaOH before the equivalence point was reached. What is the concentration of the HCl?
HCl + NaOH -> H2O + NaCl
A) 0.28 M HCl
B) 0.11 M HCl
C) 0.035 M HCl
D) 3.14 M HCl
Answer:
A
Explanation:
Answer:
C
Explanation:
Pretty sure!
Help Anyone! What would be the correct answer to this question?
What is the mass of 9.23*10^41 atoms of phosphorus (P)?
(Put your answer in scientific notation)
Answer:
[tex]m_P=4.75x10^{19}g\ P[/tex]
Explanation:
Hello there!
In this case, according to the given atoms of phosphorous, it is possible to calculate the mass of those atoms by bearing to mind the definition of mole in terms of the Avogadro's number; which refers to the mass and amount of particles in one mole of any element as equal to the atomic mass and the Avogadro's number respectively:
[tex]1 molP=6.022x10^{23}atoms\ P=30.97gP[/tex]
Which is used to obtain the required mass of P:
[tex]m_P=9.23x10^{41}atoms\ P*\frac{30.97g P}{6.022x10^{23}atoms\ P}\\\\m_P=4.75x10^{19}g\ P[/tex]
Regards!
Calculate the specific heat of a substance given that 49 joules of heat is required to raise the temperature of 25.0 g of the substance from 92.6 ºC to 99.4 ºC.
Answer:
0.29 J/g.°C
Explanation:
Step 1: Given data
Added heat (Q): 49 JMass of the substance (m): 25.0 gInitial temperature: 92.6 °CFinal temperature: 99.4 °CStep 2: Calculate the temperature change (ΔT)
ΔT = 99.4 °C - 92.6 °C = 6.8 °C
Step 3: Calculate the specific heat of the substance (c)
We will use the following expression.
Q = c × m × ΔT
c = Q / m × ΔT
c = 49 J / 25.0 g × 6.8 °C = 0.29 J/g.°C
suggest reasons why it is necessary to standardise HCl and NaOH solutions
Answer:
look at explanation
Explanation:
the actual concentration of the NaOH solution has to be determined experimentally using a process called standardization. To standardize a base solution such as NaOH, an acid whose amount can be determined to a high degree of accuracy (called a primary standard) is needed.
Hope this helps!
1. Arrange the following groups in order of decreasing priority that would allow you to determine E/Z, or R/S. Provide a string of letters (e.g. abcd) as an answer with the highest priority listed first, lowest priority last:a) -CH3
b) -CH2OH
c) -CH2NH2
d) -CH2BR2. Arrange the following groups in order of decreasing priority that would allow you to determine E/Z, or R/S. Provide a string of letters (e.g. abcd) as an answer with the highest priority listed first, lowest priority last:a) -F
b) -CH2OH
c) -CHO
d) -CH3
Answer:
1. CH₂Br > CH₂OH > CH₂NH₂ > CH₃
2. -F > -CHO > - CH₂OH > CH₃
Explanation:
The arrangement of the above atom is due to their atomicity and electronegativity of the given compounds.
From (1) we will realize that Bromine (Br) possesses the greatest priority because its atomic number is the highest. This is followed by oxygen (O) in CH₂OH since atomic no 8 is higher than that of Nitrogen N(7). Lastly, CH₃ has the only hydrogen attached to it with the atomic no of (1)
In the second part of the question>
The electronegativity of an element increases across the period and down the group. Fluorine is highly electronegative and contains the highest atomic number of oxygen in -CHO. The oxygen (O) in -CHO has a double bond which gives an edge over the (O) in CH₂OH. Lastly, CH₃ contains a substituted hydrogen atom
g When a species can be represented by two or more resonance structures, the actual representation of bonding in the species is given by: A. the resonance structure with no multiple bonds B. the resonance hybrid of all structures C. the best resonance structure D. the resonance structure with no lone pairs on the central atom. E. the resonance structure with the most multiple bonds
Answer:
B. the resonance hybrid of all structures
Explanation:
The idea of resonance is used to explain bonding in compounds where a single structure does not fully account for all the bonding interactions in a molecule.
A number of equivalent structures are then used to show the nature of bonding in such a molecule. Such structures are called resonance structures or canonical structures. None of these structures individually offer a holistic explanation to the bonding interactions in the molecule under study.
However, a hybrid of all the canonical structures does explain the nature of bonding in the molecule.
Answer:
B. the resonance hybrid of all structures
Explanation:
When a species can be represented by two or more resonance structures, the actual representation of bonding in the species is given by: the resonance hybrid of all structures
How many mL of a 6 M NaOH stock solution is needed in order to prepare 500 mL of a 0.2 M NaOH solution?
Answer:
The right answer is "16.67 mL".
Explanation:
Given:
Molarity of NaOH,
[tex]M_1=6 \ M[/tex]
[tex]M_2=0.2 \ M[/tex]
Volume of NaOH,
[tex]V_1=V \ mL[/tex]
[tex]V_2=500 \ mL[/tex]
As we know, the equation,
⇒ [tex]M_1V_1=M_2V_2[/tex]
On putting the values, we get
⇒ [tex]6\times V=0.2\times 500[/tex]
⇒ [tex]6\times V=100[/tex]
⇒ [tex]V=\frac{100}{6}[/tex]
⇒ [tex]=16.67 \ mL[/tex]
how much corn syrup should be added to water to make 200 mL of a 10% by volume solution
To make 200 mL of a 10% by volume solution, add 20 mL corn syrup to water.
What is volume solution?Volume percent of a solution is defined as the ratio of the volume of solute present in a solution to the volume of the solution as a whole. It means that the volume of a closed figure determines how much three-dimensional space it can occupy. In terms of numerical value, volume is the amount of three-dimensional space enclosed by a closed surface. For example, a substance's space can be solid, liquid, gas, or plasma, or any other space-occupying shape. The volume percentage of a solution can be calculated by dividing the volume of solute by the volume of solution and multiplying the result by 100. The basic formula for volume is length width height, whereas the basic formula for area of a rectangular shape is length width height. The calculation is unaffected by how you refer to the various dimensions: you can, for example, use 'depth' instead of 'height.'To learn more about volume solution, refer to:
https://brainly.com/question/27030789
#SPJ2
A solid sample is hit with a hammer and breaks into jagged, irregular shards. What type of solid was it? A) molecular solid b) network solid c) ionic solid d)metallic solid
I honestly don't know the answer