Answer:
Trains stop in their own time.
Every freight train, every situation, every load is different. The distance it takes to halt a train in an emergency is based on multiple factors: the speed when the brakes are applied, the track's incline, the number of cars hooked behind the locomotives and the loading of those cars, the "brake delay" inherent in the train's hydraulic system, the friction-causing metallurgy of the wheels and tracks, the weather.
Even the engineer behind the controls can't know on any given day how long it would take to stop the train.
"There is no specific rule of thumb on that," said Greg Udolph, general manager of the Texas State Railroad, a freight and tourist line in East Texas running from Palestine to Rusk. "If the track is wet with dew it changes. Everything that can affect it does. A train takes as long to stop as it takes to stop. Sometimes it can be a mile. Sometimes it's less, sometime's it's more."
Explanation:
Hope this helps :)
Why the temperature of a resistor increase when a current pass through it
Answer:
So, when an electrical charge passes through a resistor, some of that electrical energy is transferred into heat, increasing the temperature. This extra energy causes the particles in the resistor to vibrate more. With these particles moving more, it is more difficult to for the electrons to move through the resistor.
10. What is the acceleration due to gravity at a location
where a 15.0-kilogram mass weighs 45.0 newtons?
1) 675 m/s2
2) 9.81 m/s2
3) 3.00 m/s2
4) 0.333 m/s2
How would the particles be arranged in an object that has a high density? What about in
an object that has a low density?
Answer:
Explanation:
The particles in solids are very close together. They are tightly packed, giving solids high densities.
The particles in gases are very far apart, so gases have a very low density.
A horse accelerates from rest at 3 m/s2. How long does it take to reach a speed of 12 m/s?
Answer:
it will take 4.0 seconds
Answer all of them an you will get the brain list
Answer:
4. Force = 178.6 Newton.
5. Acceleration = 2.28 m/s².
6. Force = 178.6 Newton.
Explanation:
4. Given the following data;
Acceleration = 3.8 m/s²
Mass = 47kg
Force = mass * acceleration
Force = 47 * 3.8
Force = 178.6 Newton.
5. Given the following data;
Force = 785N
Mass = 345kg
Acceleration = force/mass
Acceleration = 785/345
Acceleration = 2.28 m/s²
6. Given the following data;
Acceleration = 6m/s²
Force = 32N
Mass =force/acceleration
Mass = 32/6
Mass = 5.33 kilograms
A hydraulic press consist of of two
cylinders of cross sectional areas
0.2m2 and 5m². The piston in the
smaller cylinder is pushed down
with a force of 100N through a
distance 0.2m. calculate
Links
(0)
The pressure transmitted
(ii)
The force exerted by the
piston in the larger cylinder.
Answer:
Explanation:
i )
area of small piston = 0.2 m²
Force = 100 N
pressure created on small piston
= 100 / .2 = 500 N/m²
According to Pascal's law , this pressure will be transmitted to larger cylinder .
area of larger cylinder = 5 m²
ii )
pressure = force / area
force in the large cylinder = pressure x area of large cylinder
= 500 x 5
= 2500 N .
I’ll love you forever if you help me <3
A 12.0 cm object is 9.0 cm from a convex mirror that has a focal length of -4.5 cm. What is the distance of the image from the mirror?
Answer: -3cm
Explanation:
Answer:
-3
Explanation:
edg
Velocity is speed with ?
To answer this question click the blank, then click the word in the word bank.
Word Bank:
A:Direction
B:slope
C:acceleration
Answer:
A. Direction
Explanation:
Velocity is the speed of something heading in a certain direction. If speed or direction changes, the velocity changes.
explain the forces of that affect the soccer balls path.
Answer:
yeah its correct
Explanation:
As the ball spins, friction between the ball and air causes the air to react to the direction of spin of the ball. ... Therefore, when a soccer player kicks the ball right of center the ball spins counter-clockwise and the Magnus force acts left, causing the ball to curve left.
Ralston had lots of spicy and oily food which triggered heartburn. The doctor prescribed
him Milk of Magnesia.
a. Why did the doctor prescribe milk of magnesia?
b. What is the chemical name of milk of magnesia?
Answer:
A.) The doctor decided to prescribe milk of magnesia because of the mineral Magnesium. Magnesium helps to reduce stomach acid and increases the water in the intestines which helps induce motility in the intestines. Heartburn is caused by stomach acids traveling up into your esophagus which causes that feeling of your heart burning. Milk of magnesia will help soothe this.
B.) The chemical name of milk of magnesia is magnesium hydroxide.
Explanation:
The chemical name of the milk of magnesia is magnesium hydroxide.
An antacid is any substance that is taken to decrease or neutralize the acidity of the gastro intestinal tract. We must note that the gastrointestinal tract is natural acidic.
However, hyperacidity of the gastrointestinal tract could lead to heartburn. This acidity is neutralized using an antacid such as milk of magnesia. The chemical name of the milk of magnesia is magnesium hydroxide.
Learn more about antacid: https://brainly.com/question/1301963
7) When you place a metal saucepan on the heating element of a stove, heat is transferred from the element to the saucepan by:
A reflection.
B convection.
C conduction.
D radiation.
8) Which of the following can be described as being luminous :
A Streetlights (turned on)
B A road sign
C The moon
D Water
9) In the burning of fireworks during New Year displays, chemical potential energy is converted into:
A heat, light and sound energy.
B light and sound energy.
C sound and heat energy.
D gravitational potential energy and light.
10) Which would be the most appropriate description of how energy is distributed when a torch is turned on?
A 70% light energy, 30% thermal energy
B 70% thermal energy, 30% electrical energy
C 65% light energy, 30% thermal energy
D 40% thermal energy, 55% light energy
Answer:
Explanation:
7.Conduction
Assuming the pot is cold and the heating element is hot: Heat will be transferred from the element to the pan via conduction because they are in contact with one another.
8. C The moon
9. A heat, light and sound energy.
When fireworks explode, chemical energy is transformed into thermal energy, mechanical energy, radiant energy, and sound energy.
10.A 70% light energy, 30% thermal energy
When the flashlight is turned on, the chemical energy is first transformed into electrical energy and then into light energy.
If number 10 is not correct then the answer is C.
A plane mirror forms an image of an object because it ____________ light from the object.
Answer:
reflect
Explanation:
In order to see the image of an object in a mirror, you must sight at the image; when you sight at the image, light will come to your eye along that line of sight.
Identify what happens to the kinetic energy (KE) and gravitational potential energy (PE) of a rock as it falls.
KE and PE both increase.
KE and PE both decrease.
KE increases and PE decreases.
KE decreases and PE increases.
Answer:
KE increases and PE decreases.
Explanation:
POTENTIAL ENERGY (PE):
The potential energy of the rock depends upon the height of the rock, as given by the following formula:
P.E = mgh
Therefore, the potential energy will be highest at the initial point due to the highest height attained by rock. As the rock falls, its height will decrease as a result its potential energy will also decrease.
KINETIC ENERGY (KE):
The kinetic energy of the rock depends upon the velocity of the rock, as given by the following formula:
[tex]K.E = \frac{1}{2}mv^2[/tex]
Therefore, the kinetic energy will be zero at the initial point due to the zero velocity of the rock. As the rock falls, its velocity will increase as a result its kinetic energy will also increase.
Hence, the correct option will be:
KE increases and PE decreases.
In order to have an airplane ascend, it needs to have more___
than weight. *
Drag
Weight
Lift
Thrust
Answer:
drag weight lift thrust
Name three things that are NOT made of matter
Answer:
Light.
Sound.
Heat.
Energy.
Gravity.
Explanation:
This graph shows a supply curve. A graph titled Supply Curve has Quantity Supplied on the x-axis, from 0 to 50 in increments of 10, and price on the y-axis, from 0 to 15 dollars in increments of 5 dollars. A line is drawn with points (10, 5 dollars), (20, 7 dollars), (30, 10 dollars), (40, 13 dollars), and (40, 15 dollars). What happens when the price of a good increases? The quantity of goods that are produced increases. The producer of the good is certain to make less money. The quantity of goods that are produced decreases. The quantity of goods that are produced stays about the same.
Answer:
A just took the quiz on edge
Explanation:
In the supply curve, when the price of a good increases, A. The quantity of goods that are produced increases.
What is supply?Supply simply means the quantity of goods and services that a supplier is willing to sell at a particular place, price and time.
In this case, when there's an increase in the price of goods, it should be noted that producers will supply more of the goods. This is done in order to generate more revenue.
Learn more about supply on:
https://brainly.com/question/11898489
If the amount of force from the group on the left was 235 N, what is the amount of force from the group on the right
Answer:
(F = ma ) Newton's second law states that force is proportional to what is required for an object of constant mass to change its velocity. This is equal to that object's mass multiplied by its acceleration.
What is the rate at which velocity changes called?
A 1.0 kg toy car is released at the top of a frictionless track on the left and rolls off of the track from its right
side ramp. The car starts at a height of 0.80 m, goes through a 0.50 m diameter loop, and exits the ramp at a
height of 0.25 m.
Answer: -5.4
Explanation:
Khan said so
Answer:
2.5 J
Explanation:
What is the change in the car gravitational potential energy from A-B
In what areas is the Big Bang theory inadequate or weak?
PLEASE HELP!!! GIVING BRAINLIEST!! ill also answer questions that you have posted if you answer this correctly!!!! (60pts)
How is speed related to kinetic energy?
Answer:
K.E. = 1/2mv^2
Explanation:
v is velocity (a vector) not speed (a scalar) but they have the same magnitude
A 6.3 μC electric charge is placed in an Electric Field with a magnitude of 5.0 x 105 charge due to the Electric Field? N/C. What is the electric force on the charge due to the electric field
Answer:
F = 3.15 N
Explanation:
Given electric charge, q = 6.3 μC
The magnitude of electric field, [tex]E=5\times 10^5\ N/C[/tex]
We need to find the electric force on the charge due to the electric field. The electric force is given by :
F = qE
Putting all the values,
[tex]F=6.3\times 10^{-6}\times 5\times 10^5\\\\F=3.15\ N[/tex]
So, the required force on the charge is 3.15 N.
PLEASE HELP!!! GIVING BRAINLIEST!! ill also answer questions that you have posted if you answer this correctly!!!! (50pts)
Explanation:
object D would be the hardest to stop, it has more mass, thus it has a higher momentum than the others, requiring a larger force to stop
how could you weaken the force of gravity between cars and the Earth?
**I WILL MARK BRAINLEST**
Answer:
The answer you have selected is correct.
Explanation:
Increase radius, force of gravity decreases
All electrical devices must have two of what
Answer:
a voltage source and a conductor.
Explnation:
All electric circuits have at least two parts: a voltage source and a conductor. The voltage source of the circuit
Acceleration occurs when an object changes its_ or _or both
Answer:
Acceleration occurs when an object changes its VELOCITY or DIRECTION or both
Explanation:
what are newtons laws of motion?
Answer:
In classical mechanics, Newton's laws of motion are three laws that describe the relationship between the motion of an object and the forces acting on it. The first law states that an object either remains at rest or continues to move at a constant velocity, unless it is acted upon by an external force.
Explanation:
The EMF does not depend on which of the following?
A. The magnetic field strength
B. The number of electrons in the magnetic field
C. The velocity of the wire in the field
D. The length of the wire in the magnetic field
Answer:
Explanation:
When a wire of length L is moved with velocity v , perpendicular to magnetic field B , EMF will be produced at its two ends . EMF can be calculated with the help of following expression
EMF = BLv
As per this formula , EMF produced will not depend upon number of electrons in the magnetic field.
So B is the right choice.