Answer:
B
Explanation:
I think the answer is Diffusion and Osmosis
The processes that provide evidence of the particulate nature of matter would be diffusion and osmosis.
Matter is defined as anything with mass/weight and able to occupy space. Matters could be molecules of solid, liquid, or gases. The molecules of each category of matter have their specific characteristics.Molecules of liquids and gases are able to diffuse. Diffusion is defined as the movement of molecules from the region of high concentration to the region of low concentration. Molecules of solids in the dissolved form are also able to diffuse. Water molecules are also able to move from the region of high to the region of low water potentials by osmosis in the presence of a semi-permeable membrane.Thus, both diffusion and osmosis back up the particulate nature of matter.
More on the particulate nature of matter can be found here: https://brainly.com/question/15230454?referrer=searchResults
How are the three intermolecular forces related?
Explanation:
Intermolecular forces are electrostatic in nature and include van der Waals forces and hydrogen bonds. ... The three major types of intermolecular interactions are dipole–dipole interactions, London dispersion forces (these two are often referred to collectively as van der Waals forces), and hydrogen bonds.May 20, 2018
A saturated hydrocarbon having molecular formula CnH2n+2 diffuses through a porous membrane twice as fast as sulphur dioxide. Calculate the volume occupied by the hydrocarbon at27°C and 2atm ?
Help me fast !
Answer:
12.3 L
Explanation:
Now we have that the rate of diffusion of the saturated hydrocarbon is R1
Rate of diffusion of sulphur dioxide is R2
Molar mass of hydrocarbon is M1
Molar mass of sulphur dioxide is 64 gmol-1
From Graham's law;
R1/R2 = √64/M1
2/1 =√64/M1
(2/1)^2 = (√64/M1)^2
4/1 = 64/M1
4M1 =64
M1 = 16
To obtain the number of moles of the gas;
(n*12) + (2n + 2) 1 = 16
12n + 2n + 2 = 16
14n + 2 = 16
14n = 16 - 2
n = 14/14
n = 1
Hence the hydrocarbon is CH4
Volume occupied by CH4 at STP = 22.4 L
Hence;
P1 = 1 atm
T1 = 273 K
V1 = 22.4 L
T2 = 300 K
P2 = 2 atm
V2 = ?
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 1 * 22.4 * 300/2 * 273
V2 = 12.3 L
The volume occupied by the hydrocarbon at 27 °C and 2 atm is 12.31 L
Let the hydrocarbon be initially at standard temperature and pressure (STP)
Thus, we can obtain the new volume of the hydrocarbon by using the combined gas equation as illustrated below:
Initial volume (V₁) = STP = 22.4 L Initial pressure (P₁) = STP = 1 atmInitial temperature (T₁) = STP = 273 KFinal temperature (T₂) = 27 °C = 27 + 273 = 300 KFinal pressure (P₂) = 2 atmFinal volume (V₂) =?P₁V₁ / T₁ = P₂V₂ / T₂
(1 × 22.4) / 273 = (2 × V₂) / 300
22.4 / 273 = (2 × V₂) / 300
Cross multiply
273 × 2 × V₂ = 22.4 × 300
546 × V₂ = 6720
Divide both side by 546
V₂ = 6720 / 546
V₂ = 12.31 L
Thus, the volume occupied by the hydrocarbon at 27 °C and 2 atm is 12.31 L
Learn more about gas laws:
https://brainly.com/question/25967416
Molecular orbital diagram for Fe.
ANSWER;
1s22s22p63s23p63d64s2
EXPLANATION;
Molecular orbital diagram for Fe.
In writing the electron configuration for Iron the first two electrons will go in the 1s orbital. Since 1s can only hold two electrons the next 2 electrons for Iron go in the 2s orbital. The next six electrons will go in the 2p orbital. The p orbital can hold up to six electrons. We'll put six in the 2p orbital and then put the next two electrons in the 3s. Since the 3s if now full we'll move to the 3p where we'll place the next six electrons. We now shift to the 4s orbital where we place the remaining two electrons. After the 4s is full we put the remaining six electrons in the 3d orbital and end with 3d6.
Therefore the Iron electron configuration will be 1s22s22p63s23p64s23d6.
Note that when writing the electron configuration for an atom like Fe, the 3d is usually written before the 4s. Both of the configurations have the correct numbers of electrons in each orbital, it is just a matter of how the electronic configuration notation is written
Therefore we have 1s22s22p63s23p63d64s2
Read the word equation: “Propane gas plus oxygen gas produces __________.”
b) Convert the word equation to a chemical equation and complete the reaction. Be sure to balance
the chemical equation.
c) Record the balanced chemical equation on the Student Worksheet.
Answer:
Propane gas plus oxygen gas produces water and carbon dioxide.
Explanation:
This is the initial chemical equation: C3H8 + O2 = CO2 + H2O
This is the balanced chemical equation: C3H8 + 5 O2 = 3 CO2 + 4 H2O
C3H8 + O2 → CO2 + H2O
However, the above equation is not balanced. To balance it, we make use of coefficients to make the number of atoms of each element equal. The balanced equation is as follows:C3H8 + 5O2 → 3CO2 + 4H2O
Learn more: https://brainly.com/question/7181548?referrer=searchResults
which event would most likely lead to a thunderstorm HELP GIVING BRAINLIEST
Answer:
A
Explanation:
i got right
which 2 not one 2! hjmdnxhjund
Answer:
A and D then I guess
Explanation:
sorry hope this helps!
How long does it take for the moon to make one revolution around Earth?
Answer:
27 days, 7 hours and 43 minutes.
Explanation:
To complete a full orbit around Earth, it takes 27 days, 7 hours and 43 minutes for the Moon. This is called sidereal month and is measured by the Moon's position relative to distant *fixed" stars.
Please help Fast I do not know
Answer:
So the answer to this question would be C. 400 J
Explanation:
Now for this problem, what is given is a 40 Newtons which would represent the force to be applied to the object, and a distance of 10 meters after the application of the said force. When these two combine, work is done. The unit for work is Joules and this is what we are looking for. The formula to get Joules or for work would be the force applied to the object multiplied by the distance that it travelled after the application of the force. It looks like this
work = force x distance
Joules = Newtons x meter
so let us substitute the variables to their corresponding places
Joules = 40 N x 10 m
Joules = 400 J
IF THIS HELPED YOU PLEASE MARK ME BRAINLIEST! THANKS! :)))))
PLEASE HELP ME!!!!!!!!
Answer:
I think the answer is false
why is it important to prepare for disaster? what are the things you need to prepare?
Explanation:
The reason why it is important to prepare for an disaster is because Being prepared can reduce fear, anxiety, and losses that accompany disasters. People also can reduce the impact of disasters (flood proofing, elevating a home or moving a home out of one's harm's way, and securing items that could shake loose in an earthquake) and sometimes avoid the danger completely.
The things you need to prepare for an disaster is
WaterFoodClothing Money if neededFlash lightBatteriesFirst aid kitYou can even need an radio( to keep updated).The density of a gas is 1.26 g/L at STP. What is the mass of 1 mole? What could this gas be?
Answer: Molar mass=28.224g/mol, The gas could be Nitrogen gas
Explanation:
Density is calculated as Molar mass/ Molar Volume
Recall that
One mole of an ideal gas at (STP) standard temperature and pressure = 22.4 liters (in Volume)
Given That Density =1.26 g/L
Volume = 22.4L at STP,
Molar mass = Density x Molar Volume
= 1.26 g/L x 22.4L =28.224g
Therefore, if 1 mole of this gas has a mass of 28.224g then its molar mass is equal to 28.224g/mol
The molar mass of Nitrogen = 28.014 g/moL, so we can conclude the the gas could be Nitrogen
can someone help me with my chemistry on my page/account?
Answer:
Yes
Explanation:
Text me on here
dipole dipole bonds are covalent bond?
Answer:
The polar covalent bond is much stronger in strength than the dipole-dipole interaction. The former is termed an intramolecular attraction while the latter is termed an intermolecular attraction. So now we can define the two forces: Intramolecular forces are the forces that hold atoms together within a molecule.
Explanation:
I have some things to point out:
#1: There is no such thing as "Dipole-dipole bonds", only Dipole-dipole interactions between molecules that share an unequal balance of electrons between their atoms.
#2: Intermolecular forces of attraction such as Dipole-dipole interactions are not considered as covalent bonds. Covalent bonds are rigid and are considered intramolecular forces of attraction (found within the molecule instead of between)
Hope I have helped you! Many thanks.
How many grams of NaCl are needed to make 300ml of a 2% solution
Answer:
2grams as per the question
Name the following hydrocarbon:
CH3CH2CH2CH2F
A. 4-fluorobutane
B. 2-fluorobutane
C. 1-fluorobutane
D. 1-fluoropentane
Answer:
The correct answer is (C)
Which is "1-fluorobutane"
Explanation:
Hope this helped if so please leave a "Rating" and "Like" and MARK me Brainliest if it was the BEST answer! THANKS! :)
The name of the hydrocarbon CH3CH2CH2CH2F is 1-fluorobutane.
In naming organic hydrocarbons, we count the number of the parent chain family. Here, we have an alkane with 4 carbons, which means that the parent chain is a family of alkane. The fourth compound in the family of an alkane is butane.
Afterwards, we will determine if there is any substituent attached to any of the carbon atoms in the chain and rank them in a way such that we have the lowest possible number.
Here, the fluorine is attached to the first carbon atom. So, it becomes 1-fluorobutane.
Learn more about the naming of hydrocarbons here:
https://brainly.com/question/16043495?referrer=searchResults
A different brand of iron tablet was analysed by Hitration with 0.0093 mol.L" potassium
dichromate via the reaction listed below;
Cr2O72- + 6Fe2+ + 14H+ + 2Cr3+ + 6Fe3+ + 7H20
In this experiment 4 tablets were crushed and dissolved in 200 cm3 of dilute acid. 25cm3
of this solution was used in the titration. The results of the titrations were as follows;
Titration Volume dichromate (cm)
1
33.0
2
32.05
3
32.15
4
32.10
Calculate the concentration of iron used in the titration (4 dp).
C1V1/C2V2 = n/n2
The concentration of iron used in the titration : 0.009 M
Further explanationGiven
Reaction
Cr₂O₇²⁻ + 6Fe²⁺ + 14H⁺ ⇒ 2Cr³⁺ + 6Fe³⁺ + 7H₂O
0.0093 mol/L potassium dichromate
200 cm³ of dilute acid, 25cm³ was used in the titration.
Required
the concentration of iron
Solution
Titration formula
C₁V₁n₁=C₂V₂n₂⇒ From equation : n₁=6n₂(1=Cr₂O₇, 2=Fe)
titration average : 33+32.05+32.15+32.1 / 4 = 32.325 cm³(ml)
25 cm³ of iron solution used in titration :
[tex]\tt V_1=32.325~ml\\\\V_2=25~ml\\\\C_1=0.0093~M\\\\\\\\C_1.V_1.n_2=C_2.V_2.n_1\\\\0.0093\times 32.325\times 6=C_2\times 25\times 1\\\\C_2=0.07215~M[/tex]
Dilution(25 ml from 200 ml iron solution)
[tex]\tt C_2.V_2=C_1.V_1\\\\0.007215\times 25=C_1\times 200\\\\C_1=0.009~M[/tex]
In a molecule of calcium sulfide, calcium has two valence electron bonds, and a sulfur atom has six valence electrons. How many lone pairs of electrons are present in the Lewis structure of calcium sulfide?
A. one
B. two
C. three
D. four
E. none
Answer:
E.none
Explanation:
because the bonds join with each other and no lone pair is left
For the following reaction, calculate how many moles of each product are formed when 4.05 g of water is used.
2 H2O → 2 H2 +02
Answer:
A. 0.225 mole of H₂
B. 0.113 mole of O₂.
Explanation:
We'll begin by calculating the number of mole in 4.05 g of water (H₂O). This can be obtained as follow:
Mass of H₂O = 4.05 g
Molar mass of H₂O = (2×1) + 16 = 2 + 16 = 18 g/mol
Mole of H₂O =?
Mole = mass /Molar mass
Mole of H₂O = 4.05 / 18
Mole of H₂O = 0.225 mole
Next, the balanced equation.
2H₂O —> 2H₂ + O₂
From the balanced equation above,
2 moles of H₂O produced 2 moles of H₂ and 1 mole of O₂.
A. Determination of the number of mole hydrogen produced.
From the balanced equation above,
2 moles of H₂O produced 2 moles of H₂.
Therefore, 0.225 mole of H₂O will also produce 0.225 mole of H₂.
B. Determination of the number of mole oxygen produced.
From the balanced equation above,
2 moles of H₂O produced 1 mole of O₂.
Therefore, 0.225 mole of H₂O will produce = (0.225 × 1)/2 = 0.113 mole of O₂.
Thus, 0.113 mole of O₂ is produced.
Your skin is an important organ and has several functions. All of the functions below are performed by the skin EXCEPT
A)
makes vitamin D.
B
prevents-dehydration:
C)
maintains body temperature.
D)
works with bones to help you move.
Answer:D
Explanation:
Your skin makes vitamin D
Your skin prevents dehydration
And your skin maintains body temperature. So you are left with D
Answer:
The correct option is D.
works with bones to help you move
Explanation:
Skin is the outer layer of the body and it is the body's largest organ.
It protect the body from heat and other harmful substances.
It is comprises of three layers;
The Epidermis which is the outer layer.
The dermis which is a fibrous later that protect the Epidermis.
The subcutis is the subcutaneous layer that is beneath the dermis.
Function of the skin.
1. It's regulate body temperature
2. It's protect the body from heat and pathogenic entry.
3. It produces vitamin D
4. The skin allow sensations or feelings of touch, heat, and cold.
Therefore;
works with bones to help you move is wrong because it is the muscle that work with the bone.
What will happen to the following equilibrium if Cl2
was removed ?
4HCI(9) + O2(9) = 2012(9) + 2H20(9)
The following equilibrium will shift in the direction of the product:
Further explanationGiven
Reaction
4HCl + O₂ → 2H₂O + 2Cl₂
Cl₂ was removed
Required
Equilibrium changes
Solution
Reaction = - action
adding the products ⇒ Shifts in the direction of the reactants
reducing the products ⇒Shifts in the direction of the products
Cl₂ as a product, so if Cl₂ is taken or reduced, the reaction will try to maintain system equilibrium by moving to the right (product formation) ⇒ Shift in the direction of the product:
What is GRAVITY and WHO discovered it? *
Answer:
Newton discovered it.
Explanation:
Gravity is the attraction between the earth and any object. and gravitational force is the attraction between any two objects.
Answer:
gravity is a force that pulls things towards each other
Explanation:
issac newton is the one who discovered it
A radical is a reactive intermediate with a single ____________ electron, formed by ____________ of a covalent bond. Allylic radicals are stabilized by ____________ , making them ____________ stable than tertiary radicals. A compound that contains an especially weak bond that serves as a source of radicals is called a radical ____________ . Treatment of cyclohexene with N-bromosuccinimide in the presence of light leads to ____________ by ____________ intermediates.
1. A radical is a reactive intermediate with a single ____________ electron, formed by ____________ of a covalent bond.
1. A: Unpaired, and homolysis
2. Allylic radicals are stabilized by ____________ , making them ____________ stable than tertiary radicals.
2. A: Resonance, and more
3. A compound that contains an especially weak bond that serves as a source of radicals is called a radical ____________ .
3. A: Initiator
4. Treatment of cyclohexene with N-bromosuccinimide in the presence of light leads to ____________ by ____________ intermediates.
4. A: Allylic substitution by radical
What does a useful scientific explanation include ??
Answer: scientific explanation
Explanation:
A really good scientific explanation should do two main things: It should explain all the observations and data we have. It should allow us to make testable predictions that we can check using future experiments.
What is another name for acetic acid? *
1. lemons, limes or oranges
2 .vinegar
3. vitamin C
what is the molecular formula of methanoic acid
Answer:
CH₂O₂
Mark me as brainliest plz.
Explanation:
CH2o2.is right ans hi I'm anmol kulkar from India
Please help will give brainliest
Answer:
the answer id D
Explanation:
i dont know im just living here 5
HELP 20 POINTS
What is the frequency of an Electromagnetic wave has with wavelength 2.94 x 10^-8 cm?
Spheres of Earth Assignment Active Analyzing Sphere Interactions Explain how Earth's spheres may be affected by the droughts brought on by El Niño. Sometimes, the surface of the Pacific Ocean warms up, causing changes in the weather in some areas. This phenomenon is called El Niño. El Niño causes the amount of rainfall in some parts of the United States and South America to increase. It also causes droughts to occur in Southeast Asia and Australia. Droughts occur when an area receives less rain than it normally does over a certain period.
help me on this question please. it is 7th grade science
What is 797 mm hg to atm?
Answer:
797 mm hg = 1.04868 atm
Explanation:
1 atm = 760 mm hg
797 mm hg to atm is 1.0468 atm
Pressure is defined as the physical force exerted on an object. The force applied is perpendicular to the surface of objects per unit area.
There are many different types of units and prefixes that may be used in general practice to reflect pressure. Thus, it is ensured that all the measurements and their respective units are in the same framework when conducting pressure calculations.
Pascal is the SI unit of pressure, and is the basic pressure unit in the SI (the International System of Units) system.
Given,
Pressure = 797 atm
1 mm Hg = 0.00131579 atm
797 mm Hg = 0.00131579 × 797
= 1.04868 atm
Learn more about Pressure, here:
https://brainly.com/question/30673967
#SPJ1
Describe the characteristics
of the different sections
(families) of the periodic
table
Answer: The vertical columns on the periodic table are called groups or families because of their similar chemical behavior. All the members of a family of elements have the same number of valence electrons and similar chemical properties. The horizontal rows on the periodic table are called periods