Explanation:
Crystallography. an arrangement in space of isolated points (lattice points ) in a regular pattern, showing the positions of atoms, molecules, or ions in the structure of a crystal.
If an atom experiences sufficient thermal activation, it can move to a neighboring lattice position.4 If the vibration frequency of the atom is v and the atom has Z nearest neighbors, the total number of jump attempts is vZ. However, only a small fraction of the attempts will be successful, with a probability depending on the ratio between the necessary activation energy for a single jump QD and the thermal activation kBT. The effective jump frequency ΓD is then
(5.6)
With each successful jump, the atom travels one atomic distance λ and the total traveling distance in unit time is thus ΓDλ. Substituting the jump frequency ΓD into the expression for the root mean square displacement of a random walker [equation (5.5)] and using the spatial coordinate r leads to
Which statement correctly describes the relationship between air temperature and air pressure?
-Warm air rises, creating an area of low pressure.
-Cool air sinks, creating an area of low pressure.
-Warm air sinks, creating an area of low pressure.
-Cool air rises, creating an area of low pressure.
Answer:
-Warm air sinks, creating an area of low pressure.
Explanation:
Heat will weigh more, than cool air!
Which characteristic of a planet describes whether the planet has a thick or thin layer of gas?
Atmosphere
Moons
Rings
Surface composition
Answer:
Atmoshphere!
Explanation:
I took the test and got a 100%! :) Hope this helps, plz mark brainliest!
160
140
120
100
Temperature (°C)
80
60
40
20
0
0
2 4 6 8
10 12 14 16 18 20 22 24 26
Time (min)
.
At what temp will this substance freeze? 70 CV
At what temp will this substance condense? 70 C
How long will it take to release the heat of vaporization? 3 min
What is the melting point? 70 C
In what physical state did this substance end? Gas
All cooling processes, including phase changes, are Exothermic
At 90 C, what phase of matter is this substance? Liquid
If you produce 10 g of water in the reaction from 20 g of O2 what is your percent yield? 2H2+O2>2H2O
Answer:
44.4%
Explanation:
The balanced chemical equation for the reaction is:
2 H₂(g) + O₂(g) → 2 H₂O(g)
According to the equation, 1 mol of O₂ produces 2 moles of water (H₂O). We convert the moles to grams by using the molecular weight (Mw) of each compound:
Mw(O₂) = 2 x 16 g/mol O = 32 g/mol
mass O₂ = 1 mol x 32 g/mol = 32 g O₂
Mw(H₂O) = (2 x 1 g/mol H) + 16 g/mol O = 18 g/mol
mass H₂O = 2 mol x 18 g/mol = 36 g H₂O
Thus, from 32 grams of O₂, 36 g of H₂O are produced (stoichiometric ratio= 36 g H₂O/32 g O₂). We calculate the amount of H₂O that would be produced from 20 grams of O₂ by multiplying the stoichiometric ratio by the mass of O₂, as follows:
36 g H₂O/32 g O₂ x 20 g O₂ = 22.5 g H₂O
The theoretical yield of H₂O is 22.5 g, and the actual amount produced is 10 g. So, we calculate the percent yield as follows:
Percent yield = actual yield/ theoretical yield x 100
= (10 g)/(22.5 g) x 100
= 44.4%
how many moles is 130g of cocl2
Answer:
1.3142 mol CoCl2
Explanation:
Well, to answer this we need to find out how many grams are in a single mole of CoCl2. Two find that we need to get the molar mass of CoCl2
Co = 28.0101 g Co per mole
Cl = 35.453 * g Cl per mole
28.0101 + 2 * 35.453 = 98.9161 g CoCl2 per mole
Now, we divide:
130/98.9161 = 1.3142 mol CoCl2
There are 1.31 moles in 130grams of cobalt chloride (CoCl2). Details about how to convert mass to moles can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated by dividing the mass of the substance by its molar mass.
According to this question, there are 130g of CoCl2.
molar mass of CoCl2 = 28 + 35.5(2) = 99g/mol
moles = 130g ÷ 99g/mol
moles = 1.31 moles
Therefore, there are 1.31 moles in 130grams of cobalt chloride (CoCl2).
Learn more about number of moles at: https://brainly.com/question/14919968
explain what is the difference between bohr and rutherford atomic models
Answer:
The Rutherford Model shows an atom with electrons orbiting a fixed, positively charged nucleus in set, predictable paths. The Bohr model shows electrons travel in defined circular orbits around the nucleus.
Which equation is correctly balanced?
A) CaO + 2H2O + Ca(OH)2
B) NH3 + 202 → HNO3 + H20
C) Ca(OH)2 + 2H3PO4 → Ca3(PO4)2 + 3H2O
D) Cu + H2SO4 → CuSO4 + H2O + SO2
CaO + 2H2O + Ca(OH)2 is a balance chemical equation. Therefore, option A is correct.
What is balance chemical equation ?A balanced chemical equation is one that has the same number of atoms of each type in the reaction on both the reactant and product sides. In a balanced chemical equation, both the mass and the change are equal.
When a chemical reaction occurs, the mass of the products should be equal to the mass of the reactants, according to the law of conservation of mass. As a result, the number of atoms in each element remains constant during the chemical reaction. As a result, the chemical equation must be corrected.
The chemical equation is said to be balanced if there are no inequalities. Every element in this example now has an equal number of atoms on both the reactant and product sides.
Thus, option A is correct.
To learn more about balance chemical equation, follow the link;
https://brainly.com/question/28294176
#SPJ2
What is the correct formula for the missing product from the equation below:
Na2CO3(aq)
+
CaCl2 (aq)
> NaCl +
Answer:
CaCO3 (s)
Explanation:
This equation is a double replacement equation, which means that since Na and Cl and paired, Ca and CO3 will be paired.
Then, you look at the charge of each element and balance
Ca has a 2+ charge
CO3 has a 2- charge
The 2+ charge and the 2- charge will cancel so there is no need for a subscript or to balance the equation
The complete equation will be Na2CO3 (aq) + CaCl2(aq) -> NaCl (aq) + CaCO3 (s)
I hope this helps and have a great day!
The diffusion of matter and energy in a liquid is slower than diffusion in a gas
True
O False
If you have 12 atoms of hydrogen before a chemical reaction, how many atoms of hydrogen will be present
Answer:
12 atoms of hydrogen will be present in the product
Explanation:
12 atoms of hydrogen will be present in the product because the law of conservation of mass states that mass is neither created nor destroyed in chemical reactions.
The law of conservation states that the mass of the element remains the same during the course of the reaction.
The law of reaction conformed by the following:-
Mass of reactant Mass of productAccording to the question, the amount of hydrogen is 12 atoms in the reactant and the amount will remain the same at the end of the reaction, which is a product that is 12 atoms
Hence, the amount remains the same in the reaction that is 12 atoms
For more information, refer to the link:-
brainly.com/question/2817451
What ratio of NaCN to HCN is needed to prepare a pH 9.40 buffer? (Ka of HCN is 4.9 × 10⁻¹⁰)
Answer: The ratio of NaCN to HCN is, 1.26
What is the chemical name for CO?
Answer:
Carbon monoxide, (CO), a highly toxic, colourless, odourless, flammable gas produced industrially for use in the manufacture of numerous organic and inorganic chemical products; it is also present in the exhaust gases of internal-combustion engines and furnaces as a result of incomplete conversion of carbon or carbon
Explanation:
Answer:
why joy deleting my answer
Explanation:
Use a scientific calculator to calculate [H+] for the following pH values:
7 (a neutral solution)
5.6 (unpolluted rainwater)
3.7 (first acid rain sample in North America)
How many times higher is the concentration of H+ in the Hubbard Brook sample than in unpolluted rainwater?
Answer:
pH = 7 ⇒ [H⁺] = 1.0x10⁻⁷ M
pH = 5.6 ⇒ [H⁺] = 2.5x10⁻⁶ M
pH = 3.7 ⇒ [H⁺] = 2.0x10⁻⁴ M
H⁺ concentration in the Hubbard Brook sample is 80 times higher than in unpolluted rainwater.
Explanation:
To answer this problem we need to keep in mind the definition of pH:
pH = -log[H⁺]Meaning that after isolating [H⁺] we're left with:
[H⁺] = [tex]10^{-pH}[/tex]Now we proceed to calculate [H⁺] for the given pHs:
pH = 7 ⇒ [H⁺] = [tex]10^{-7}[/tex] = 1.0x10⁻⁷ MpH = 5.6 ⇒ [H⁺] = [tex]10^{-5.6}[/tex] = 2.5x10⁻⁶ MpH = 3.7 ⇒ [H⁺] = [tex]10^{-3.7}[/tex] = 2.0x10⁻⁴ MFinally we calculate how many times higher is [H⁺] when pH = 3.7 than when pH = 5.6.
2.0x10⁻⁴ / 2.5x10⁻⁶ = 80Answer:
1. 7 (a neutral solution)
Answer: 10-7= 0.0000001 moles per liter
2. 5.6 (unpolluted rainwater)
Answer: 10-5.6 = 0.0000025 moles per liter
3. 3.7 (first acid rain sample in North America)
Answer: 10-3.7 = 0.00020 moles per liter
The concentration of H+ in the Hubbard Brook sample is 0.00020/0.0000025, which is 80 times higher than the H+ concentration in unpolluted rainwater.
Explanation: -
Purpose Question:
If you have a headache, which medicine is the best choice to take?
Your choices are Aspirin, Tylenol or Ecotrin (coated aspirin)
Answer:
I will take Aspirin if I had a headache
A case of paper has a mass of 2000 g. A case of paper contains 10 reams of paper. One ream of paper is 500 sheets. What is the mass, in grams, of 50 sheets of paper?
Answer:
s8sooooosoossososososkdk
HELPP ASAP I’ll mark you as brainlister 100 points :((((
Answer:
the pool table one
Explanation:
cuz gas just goes EVERYWHERE
How are the respiratory, urinary, and integumentary systems involved in the removal of waste. (list)
Answer:
The lungs in the respiratory system excrete some waste such as carbon dioxide. The bladder helps to remove waste by urination.Using the diagram , what is the intersection of plan ABCD and GC?
Answer:
C
Explanation:
When a line segment and a plane intersect, they intersect at a point. They both coincide on point C
help me please its kinda easy lool
What makes water unique?
In your response be sure to include:
properties of water
dont use go0gle nor guess plz this is due at midnight
Answer:
Water is unique because of our need to survive on something so simple. It is just 2 hydrogen atoms and an oxygen. so simple, but necessary for all of our lives. Just 3-4 minutes without it causes permanent damage
in today's pandemic,how can you protect our ozone depletion?
Answer:
if you want to protect our ozone depletion you have aerosol products that don't contain HCFCs and CFCs as stimulus or incitement
Explanation:
why you should use aerosol because when the liquid mixture is freeded or released from the aerosol the liquid propellant becomes a gas so this can easily break up the product into a fine haze or a mist hope its helpful have a good luck
When dissolved in water all acids will???
Answer:
When dissolved in water, acids donate hydrogen ions (H+). Hydrogen ions are hydrogen atoms that have lost an electron and now have just a proton, giving them a positive electrical charge. Bases, on the other hand, mixed with water yield hydroxide ions (OH-). If a solution has a high concentration of H+ ions, then it is acidic.
Explanation:
So b
how are three of the properties
Answer:
chemical weathering
physical weathering
biological weathering
Explanation:
biological weathering it when the plants grow the root move into the rocks to cause break down
Can someone help, please...?
I really can't understand this...
Why do power plants emit such a high percentage of pollutants?
They burn fossil fuels, which releases huge amounts of sulfur dioxide and nitrogen oxide that pollute the air. ... Two thirds of all sulfur dioxide and more than one third of all nitrogen oxides that pollute the air.
The Earth's early atmosphere consisted of what
What is the name of this hydrocarbon?
Answer:In the given molecule the methyl group is attached at the second carbon atom of the parent chain. Therefore the name of hydrocarbon is 2-methylbutane.
Explanation:
What is the density of a book with a mass of 60g and a volume of 20 cm3? *
Answer:
[tex]3 g/cm^{3}[/tex]
Explanation:
Density is a measure of a substance's mass over its volume.
d = m/v
Therefore d = 60g/20cm3 = 3 g/cm3
please everyone do this and send me
Answer: question 2 is (a) (25+273)k=298k(b) (373+273)k=646k
question 5 is 25 degree Celsius
question 1 is
a = (293-273) =20 degree Celsius
b = (470-273)=197 degree Celsius
question 3 is
a = naphthalene ball undergo sublimation due to which it convert directly into vapour and disappear into air without leaving any solid
b = the participle of perfume diffuse rapidly into air and its smell can be felt while sitting serval metre away
question 4 isthe force of allraction between the particles increases as we go from liquid to gas so the required order is : Oxygen< water< sugar
I hope it is helpful to you
Determine if the following would be a buffer system.
H3PO4 and NaH2PO4
H3PO4 and Na2HPO4
sorry i dont know Explanation:
At which type of tectonic plate boundary is a volcano least likely to occur?
Answer: the answer is a
Explanation:
I took the test and got it wrong because someone said the answer was divergent boundary and it’s wrong. I hate them I hate them I hate them. I hate it I hate school
Transform boundary is the type of tectonic plate boundary is a volcano least likely to occur.
What is meant by Transform boundary?A transform fault or transform boundary, sometimes called a strike-slip boundary, is a fault along a plate boundary where the motion is predominantly horizontal. It ends abruptly where it connects to another plate boundary, either another transform, a spreading ridge, or a subduction zone.Transform boundary is the type of tectonic plate boundary is a volcano least likely to occur.
To learn more about Transform boundary refer:https://brainly.com/question/18190655
#SPJ2