Answer:
B. Volcanoes
Explanation:
B. Volcanoes
Answer:
B:Volcanoes
Explanation:
because valley rift develops
will mark BRAINLYIST
please help
1.00mol is the correct answer
GIVING BRAINLIEST AND THE REST OF MY POINTS!!!!! :D
A scientist made the following table showing the number of eggs laid by two different salmon. Based on this data, which fish has the best chance of their offspring surviving, and what type of adaptation is this?
A) Salmon #1, life cycle adaptation
B) Salmon #1, physical adaptation
C) Salmon #2, life cycle adaptation
D) Salmon #2, behavioral adaptation
Answer:
C
Explanation:I got it correct on a quiz I did that had this question
PLEASE WILL MARK BRAINLYIST
Answer:
3 i am pretty sure make me brainy i gust
Explanation:
What would be the volume, in liters, of 85.5 grams of carbon monoxide at STP?
define acidic salt with example
Answer:
[tex] \color{magenta} \huge{ \boxed{answer}}[/tex]
Acidic SaltAcid salts are a class of salts that produce an acidic solution after being dissolved in a solvent. Its formation as a substance has a greater electrical conductivity than that of the pure solvent. An acidic solution formed by acid salt is made during partial neutralization of diprotic or polyprotic acids.
hopefully help:)
Explanation:
✨use #CarryOnLearning to help our medical frontliners✨
#CarryOnLearning2.00 L of a gas is collected at 25.0°C and 745.0 mmHg. What is the volume at 760.0 mmHg
and 273K?*
1.7960L
Explanation:
the mass of the gas is constant in both instances
pv/T=constant(according to pv=nRT)
745mmHg*2L/298K=760mmHg*v/273K
v=1.7960L
It’s cold outside and you decide to cook some pasta. As you boil the noodles, the kitchen window begins to fog up. Which processes are at work here?
boiling and freezing
vaporization and condensation
evaporation and thawing
condensation and evaporation
Answer:
condensation and evaporation
Explanation:
condensation forms when warm humid air contacts cold surface. during cold months.
What is a catalyst and why is it used in chemical reactions?
Answer:
A catalyst is a substance that can be added to a reaction to speed up the process without being absorbed by it. Catalysts usually work by lowering the activation energy or modifying the mechanism of a reaction. Proteins that act as catalysts in biochemical reactions are known as enzymes.
Explanation:
Calculate the pH after 0.10 mol of NaOH is added to 1.0 L of a solution that is 0.40 M CH3NH2 and 0.80 M CH3NH3Cl. WebAssign will check your answer for the correct number of significant figures. Calculate the pH after 0.10 mol of HCl is added to 1.0 L of a solution that is 0.40 M CH3NH2 and 0.80 M CH3NH3Cl. WebAssign will check your answer for the correct number of significant figures.
Answer:
E
Explanation:
A gas tank contains 2.5 moles of oxygen, 7.0 moles of nitrogen and 0.5 mole of water vapor. The total pressure of the mixture is 852 torr. Calculate the partial pressure of each gas. Show work.
Answer:
The partial pressure of each gas is:
Oxygen= 213 torrNitrogen= 596.4 torrWater Vapor= 42.6 torrExplanation:
The pressure exerted by a particular gas in a mixture is known as its partial pressure. So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:
PT = PA + PB
This relationship is due to the assumption that there are no attractive forces between the gases.
Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.
The mole fraction of a gas in a gas mixture is given by:
XA = nA / nT
This fraction will always be less than 1.
So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:
PA = XA * PT
In this case, you know:
number of moles of oxygen= 2.5 molesnumber of moles of nitrogen= 7.0 molesnumber of moles of water vapor= 0.5 molesSo, the number of total moles nT is calculated as:
nT= number of moles of oxygen + number of moles of nitrogen +number of moles of water vapor
Then:
nT= 2.5 moles + 7.0 moles + 0.5 moles
nT= 10
So, the mole fraction of the gas in the mixture is:
mole fraction of oxygen = [tex]\frac{2.5 moles}{10 moles}[/tex] = 0.25mole fraction of nitrogen = [tex]\frac{7 moles}{10 moles}[/tex] = 0.7mole fraction of water vapor = [tex]\frac{0.5 moles}{10 moles}[/tex] = 0.05Being the total presurre (PT) equal to 852 torr, then:
Poxygen= 0.25*852 torr= 213 torrPnitrogen= 0.7*852 torr= 596.4 torrPwater vapor= 0.05*852 torr= 42.6 torrThe partial pressure of each gas is:
Oxygen= 213 torrNitrogen= 596.4 torrWater Vapor= 42.6 torrwhy is it necessary to specify temperature when giving Ka value
Answer:
Because the equilibrium constant is only at constant at temperature. Changing the temperature changes the Ka.
Iron + --> iron sulphate + copper What is missing ? Iron sulphate Copper sulphate Copper oxideIron oxide
Answer:
Copper Sulphate is missing
Acidified water is electrolysed by using carbon electrodes. What is produced
at Negative carbon electrode
Answer:
Hydrogen gas
Explanation:
During electrolysis of acidified water, H+ ions are reduced to H2 gas at the negative carbon electrode (cathode) and hence hydrogen gas is liberated at cathode.
Which of the following best support the claim that the cycling of matter and energy in Earth's interior affects
Earth's surface? Select all correct answers!!!!
A)Tectonic plates move together, apart, and past each other.
B)Lava can be observed rising to Earth's surface in some places.
C)The Earth's crust is much cooler than the Earth's interior.
D)The Earth's inner core is composed mostly of solid iron.
Answer:
am not sure but I think it c
Answer:
it’s A and B and the last one I still am trying to figure out.
Explanation:
SHOW ALL WORK AND INCLUDE UNITS
How much heat is required to raise the temperature of 10.0 g of iron from 25°C to 100.°C? The specific heat capacity of iron is 0.46 J/g°C.
Answer:
345J
Explanation:
-mass of iron (m) = 10.0 g
-temperature (ΔT) = final temperature- initial temperature= 100-25= 75 degree Celsius
-Specific Heat capacity of iron (c)= 0.46J/g°C.
Heat (Q)=?
Solution:
Formula for Heat is :
Q=m x c x ΔT
Q= 10 x 0.46 x 75
Q= 345 J.
so, 345 joules of heat are needed to increase the temperature of 10 grams of iron.
From the above formula, all other questions can easily be solved from the same procedure.
345 joules of heat is required to raise the temperature of 10.0 g of iron from 25°C to 100°C.
How we calculate the required heat in any reaction?Required heat of any reaction can be calculated as:
Q = m x c x ΔT, where
In the question given that:
m = mass of iron = 10g
c = specific heat capacity of iron = 0.46J/g°C
ΔT = change in temperature = final temperature- initial temperature= 100-25= 75 degree Celsius
Now putting all these values in the above equation, we get
Q= 10g x 0.46J/g°C x 75°C = 345J
Hence, 345 joules of heat is required.
To know more about required heat of a reaction, visit the below link:
https://brainly.com/question/878982
can someone help ill give 30 extra points if its right
Answer:
sweating
Explanation:
why do I need 20 words
Mikala pours a tablespoon of salt into a beaker of water. Diffusion will cause the salt molecules to dissolve in the molecules of water. How could Mikala increase the diffusion rate of the salt molecules?
A. Mikala could remove all sources of light from the beaker.
B. Mikala could slowly pour more water into the beaker.
C. Mikala could decrease the temperature of the solution.
D. Mikala could increase the temperature of the solution.
someone help ,, I'll give brainliest lolll .
Answer:
the correct answer is c, how easily something catches flames
The orbits of the planets in our solar system are
not
a Elliptical, circular
b Circular, elliptical
C Circular, oval
d None of the above
Answer:
A
Explanation:
I don't know how to say how I got it.
Answer:
d
Explanation:
the orbits of the planets in our circular elliptical and circular
In an isolated system, mass can neither be
created or destroyed.
ube
FALSE
TRUE
Answer:
True
Explanation:
The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants.
Hope it helps
PLEASE HELP!! Answer whatever ones you can please and thank you!!!!
1. A gas with a volume of 4.0 L at a pressure of 2.03 atm is allowed to expand to a volume of 12.0 L. What is the pressure in atm in the container if the temperature remains constant. Please show work (including the equation you used).
2.The volume of a gas is 200 mL at 350.0 kPa pressure. What will the volume be when the pressure is reduced to 120.0 kPa, assuming the temperature remains constant. Please show all work for full credit. Please show work (including the equation you used).
3.What is the original pressure of a bike tire if the current pressure is 150 atm and the volume changed from 1000 mL to 700 mL. Please show work (including the equation you used).
These problems can be solved using the gas laws. The combined gas law states that PV/T = k, where P is the pressure, V is the volume, T is the temperature (in Kelvin), and k is a constant. From this relationship, you can figure out the change in pressure, volume, or temperature of a gas provided that one of those three parameters remains unchanged. This will be shown in the problems given.
1. Here, the pressure and volume of a gas change while the temperature remains constant. Since PV/T = k, if T is also constant, then the relationship becomes PV = k. In other words, the pressure and volume of a gas at a constant temperature are inversely proportional to each other. This can be expressed mathematically as [tex]P_1V_1=P_2V_2[/tex] (also called Boyle's Law), where P₁ and V₁ denote the initial pressure and volume, and P₂ and V₂ denote the final (or changed) pressure and volume, respectively.
We are given a gas with an initial pressure, P₁, of 2.03 atm and an initial volume, V₁, of 4.0 L. We are also told that the gas expands to a final volume, V₂, of 12.0 L. So, we are looking for P₂: The pressure of the gas when the volume has expanded from 4.0 to 12.0 L. From Boyle's Law,
[tex]P_2=\frac{P_1V_1}{V_2}[/tex].
Thus,
[tex]\[P_2=\frac{\left ( 2.03 \text{ atm} \right )\left ( 4.0 \text{ L} \right )}{\left ( 12.0 \text{ L} \right )}\] = 0.67 atm.[/tex]
Since the pressure and volume of a gas are inversely proportional, as one increases, the other decreases, and vice versa.
2. This is another Boyle's Law problem, but this time, we have to figure out what the final volume will be when the pressure of a gas is changed. Since the pressure is reduced, we can deduce that the volume must increase (notice the parallel with the previous question). We again turn to Boyle's Law, and this time we solve for V₂:
[tex]V_2=\frac{P_1V_1}{P_2}[/tex]
from which we obtain
[tex]\[V_2=\frac{\left ( 350.0 \text{ kPa} \right )\left ( 200 \text{ mL} \right )}{\left ( 120.0 \text{ kPa} \right )}\] = 583 mL.[/tex]
It's not clear whether 200 mL (V₁) should be assigned three significant figures or one. I gave the answer to three significant figures; the answer to one significant figure would be 600 mL.
3. We use Boyle's Law once more here, but our word problem has us working backwards (it's also not explicitly mentioned that temperature remains constant, but it should be reasonable to assume so). The current pressure of the gas inside the bike tire is 150 atm at a volume of 700 mL . But we want to know what the initial pressure of the gas was at a volume of 1000 mL. In other words, we want to solve for the P₁ in Boyle's Law:
[tex]P_1=\frac{P_2V_2}{V_1}.[/tex]
Since the volume of the gas had decreased from 1000 mL (V₁) to 700 mL (V₂), and the pressure and volume of a gas at a constant temperature are inversely proportional, we would expect the pressure of the gas to have increased; that is, our P₁ should be less than 150 atm.
[tex]\[P_1=\frac{\left ( 150 \text{ atm} \right )\left ( 700 \text{ mL} \right )}{\left ( 1000 \text{ mL} \right )}\] = 105 atm.[/tex]
what is the name of the part of a cell that allows molecules in in, such as glucose and oxygen?
Answer:
A plasma membrane is permeable to specific molecules that a cell needs. Transport proteins in the cell membrane allow for selective passage of specific molecules from the external environment. Each transport protein is specific to a certian molecule (indicated by matching colors).
3 – Simple Diffusion Across the Cell (Plasma) Membrane: The structure of the lipid bilayer allows small, uncharged substances such as oxygen and carbon dioxide, and hydrophobic molecules such as lipids, to pass through the cell membrane, down their concentration gradient, by simple diffusion.
Or Cell Membrane
Explanation:
Hope This HElp??
Please MArk Me Brainly!!
Но Water Lewis steucture
what are asking commet it and I might be able to help
Matching
Enter the letter of the box whose contents best match the description.
8
8
8
a
b
с
e
f
v a mixture of molecules
atoms of a pure elementa metal
molecules of an element
va solid compound
a mixture of elements
a. box a
b. box e
c. box b
d. box f
e. box d
f. box c
QUESTION 10
Answer:
a mixture of molecules - Box f
atoms of a pure elementa metal - Box D
a solid compound - Box C
a mixture of elements - Box A
Explanation:
Box a has mixture of elements which forms a solid like shape but there are different elements present in the box. The box f has mixture of molecules in which many atoms are combined together. Box c has solid compound with single element.
Molarity and Dilution
How many moles are needed in a 100. mL solution of a 0.10M CuSO4 5H2O solution?
Answer: The moles needed are 0.01.
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute [tex](CuSO_4.5H_2O)[/tex] = ?
[tex]V_s[/tex] = volume of solution in ml
Now put all the given values in the formula of molarity, we get
[tex]0.10=\frac{n\times 1000}{100}[/tex]
[tex]n=\frac{0.10\times 100}{1000}=0.01[/tex]
Therefore, the moles needed are 0.01.
Sea water contains 2% salt (NaCl) by weight. Given that water has a
density of 1g/mL. Determine the concentration of salt in:
(a) mg/L , (b) ppm.
Answer:
a) Concentration of salt in mg/L = 2g/100mL
b) concentration in ppm = 20000 ppm
Explanation:
Percentage composition of salt by weight in water = 2%
Density of water = 1 g/mL
100 mL of water will has a mass of 100 g
Mass of salt in 100 g of water = 2% ×100 g = 2 g
Therefore, 2 g of salt is dissolved in 100 mL of solution
Concentration of salt in 100 mL of solution = 2g/100mL
a) Concentration in mg/L
Mass of salt = 2 g = 2000 mg
Volume of solution = 100 mL = 0.1 L
Concentration in mg/L = 2000 mg/0.1 L
Concentration in mg/L = 20000 mg/L
b) Concentration in ppm
1 ppm = 1mg/L
Therefore, concentration in ppm = 20000 ppm
Sodium chloride is a ____ substance because the atoms within are arranged in repeating patterns.
work bank
- crystalline
- hydrogen bonds
- hydrophilic
- hydrophobic
- polar molecule
- solvent
What is the symbol for entropy? S ΔH H ΔS
Answer:
S
Explanation:
The symbol for entropy is S, and a change in entropy is shown as “delta” S or ΔS. If the entropy of a system increases, ΔS is positive. If the entropy of a system decreases, ΔS is negative.
Earthquakes are common at ocean-continent convergence zones but not ocean-ocean convergence zones. TRUE FALSE Check it
Answer:
FALSE
Explanation:
The earthquakes are common in both types of convergences is oceanic and continental and ocean to oceanic convergence. As the process of subduction takes places at the oceanic - oceanic boundary and resultant plate slide down other plate leading to recycling of the crust, volcanic eruptions and this leads to the formation of a volcanic arc, trenches, and faults.What element should I do a project on?
Answer:
Project scope statement?
Explanation:
it's good one just do research on it