What environmental factors affect animal characteristics?
factor that could affect
Answers
Answers:
There's many factors, such as the temperature, rainfall, food available, and the surrounding terrain, that all can effect an animal's characteristics.
Related Questions
1. Define an element. Give at least five examples.
Answers
an element is a substance that cannot be split into simpler substances by a chemical means . for example - hydrogen, oxygen, nitrogen, carbon, iron, aluminium, copper, silver and gold some example of elements.
2Al(s) + 3Cu^3 + (aq) -> 2Al^3 + 3Cu(s) which reactant is reduced and which is oxidicided.
Pls help I have a test in 1h
Answers
Answer:
Al is oxidized
Cu is reduced
Answer:
here
Cu is reduced
and
Al is oxidised
hope this will help you
have a nice day
determine the number of significant figures in 478 cm
Answers
Answer:
There are 3 significant figures on this one.
List and describe two differences between pure substances and mixtures. Check all that apply. Check all that apply. The composition of a pure substance depends on the source, but the composition of a mixture doesn't depend on the source. The composition of a pure substance is always the same, regardless of the source, but the composition of a mixture can vary. The state of a pure substance is always the same, but the state of a mixture can vary. Mixtures can be separated into their components only by chemical changes; some pure substances can be separated into components by physical change. Mixtures can be separated into their components by physical changes; some pure substances can be separated into components by chemical change.
Answers
Answer:
The composition of a pure substance is always the same, regardless of the source, but the composition of a mixture can vary.
Mixtures can be separated into their components by physical changes; some pure substances can be separated into components by chemical change.
Explanation:
A chemically pure substance has a well defined and constant composition. The composition of a chemically pure substance remains the same irrespective of its source. Also, the components of a chemically pure substance may be separated by chemical changes.
Mixtures have a variable composition depending on their respective sources. The composition of a mixture varies with the source of the mixture and mixtures are separated by physical processes.
I have to do this for homework please help :)
Answers
Answer:
1..... nucleus
2......electron cloud
3.......protons
4........Neutrons
5..........electron
6............electrons
7...............Isotopes
8.....,...........ions
9....................charge
Every closed circuit has an electric current, voltage, and ___________..
Fill in the blank
Answers
how many moles of ions is in Magnesium chloride?
Answers
True or false intrusive igneous rock will never be found on Earth's surface?
Answers
Answer:
false
Explanation:
Answer:
false
Explanation:
lava is on the earth
Why are polar gases, such as H2O and NH3, more likely to deviate from the ideal gas behaviors described by the kinetic molecular theory? (3 points)
Question 4 options:
1)
The density of these gases is high, increasing the number of collisions and reducing their elasticity.
2)
The fluidity of these gases is high, resulting in a higher average kinetic energy.
3)
The particles have a significant volume, reducing the space between the moving particles.
4)
The particles have high intermolecular forces, reducing the elasticity of their collisions.
Answers
Answer:
HCl, H2O, and NH3 are the most polar of these, so they won't behave ideally because the particles have greater attractive forces between them. How does the kinetic-molecular theory explain the pressure exerted by gases? ... Particles are always in motion and when they are contained, they are elastic collisions.
The particles have high intermolecular forces, reducing the elasticity of their collisions.
What are polar gases?Polar molecules are formed when a high electronegative atom combined with a less electronegative atom.
Ammonia, sulfur dioxide, hydrogen sulfide, are polar gases.
The non-polar gases are inert gas or noble gas.
The polar compounds are asymmetrically array.
Thus, the correct option is 4, The particles have high intermolecular forces, reducing the elasticity of their collisions.
Learn more about polar gases, here:
https://brainly.com/question/25867706
The half-lives of both zero-order and second-order reactions depend on both initial concentrations and rate constants. Why does the half-life for second order decrease with increasing initial concentration
Answers
Answer:
This is because the half life of second order reactions is inversely proportional to the initial concentration of the reactant.
Explanation:
The equation to half life in the second order reactions is given by:
t1/2=1/[A]initial
From the equation, you can see that as the initial concentration of A increases the denominator also increases ,thus overall value (t1/2) decreases.
Hope this helps:)
An isotope undergoes radioactive decay. The new isotope that forms has an atomic number that is 2 less than the original isotope’s.
Which kind of decay has occurred, and how do you know?
1)alpha decay because alpha particles have a large mass
2)beta decay because beta particles can have negative charge
3)alpha decay because alpha particles have two protons and two neutrons
4)gamma decay because gamma rays are photons
Answers
Answer:
3)alpha decay because alpha particles have two protons and two neutrons
Explanation:
When a radioactive isotope undergoes a decay, a daughter nucleus or nuclei is/are formed. The mass number and atomic number of the daughter nucleus gives us an idea of the nature of radioactive decay that the parent nucleus underwent.
If the daughter mass number of the daughter nucleus is four units less than that of the parent nucleus and the atomic number of the daughter nucleus is two units less than that of the parent, then such a decay is an alpha decay.
An alpha particle has two protons and two neutrons thus it has a mass number of 4 and an atomic number of two.
What are the columns on the periodic table called?
(2.5 Points)
Answers
Answer:
A group is a column of elements in the periodic table of the chemical elements.
So, the columns on the periodic table are called groups.
How many grams of oxygen are required to burn 13.50 grams of acetylene?
Answers
553.6
grams of oxygen are used in this combustion.
Explanation:
Molecular mass of acetylene:
2
⋅
M
M
C
+
2
⋅
M
M
H
M
M
C
= Molecular mass of carbon
M
M
H
= Molecular mass of hydrogen
So,
2
⋅
12
+
2
⋅
1
=
26
grams/mole
Mass used in combustion
molecular mass
=
moles used in combustion
180
grams
26
grams
mole
=
6.92
moles
According to the main equation, to 2 moles of acetylene, 5 moles of oxygen are used.
M
M
O
=
2
⋅
16
=
32
grams/mole
So, if we use
6.92
moles of Acetylene,
x
moles of oxygen will be necessary.
x
=
6.92
⋅
5
2
=
3.46
⋅
5
=
17.3
moles of oxygen.
17.3
moles
⋅
32
grams
mole
=
553.6
grams of oxygen
Someone help pleaseeee I will give brainliest
Answers
Answer:
2-Methylhexane
Because Ethylexane does not have hydrogen molecules neither,also it only has 2 options but they're just repeated
What is the Molarity of a solution made by taking 2.5 moles and dissolving it into enough water to make 5.0 Liters of solution?
Answers
Answer:
.5 M
Explanation:
molarity = moles / liters
2.5/5 = .5 M
b) determine the number of moles of carbon dioxide
produced.
Answers
Explanation:
The mass of one mole of a substance, expressed in gms, is equal to the mean molecular mass of the substance. The molecular mass of CO2= 12+2x16= 44 so the mass if a mole of CO2 is approximately 44 grams.
Hope it helps!!!...
Please mark it as brainliest...
What happens when the limiting reactant of a reaction runs out?
O excess reactants begin combining.
O reaction stops
O reaction slows down.
O reaction speeds up.
Answers
Which statement is correct about molarity and volume?
Answers
Answer:
Explanation:
If the choices are:
A. Molarity is defined as moles of solute per liter of solvent.
B. % by mass is defined as grams of solute per 100 g of solvent.
C. % by volume is defined as grams of solute per 100 L of solution.
D. Molarity is defined as moles of solute per liter of solution.
E. All of the above.
then the ans is E
Answer:
They are inversely related.
Explanation:
Let's say that you were given the following
problem:
A gas that exerts a pressure of 151 mm Hg in a
container with a volume of L will exert a
pressure of 166 mm Hg when transferred to a
container with a volume of 0.532 L.
Let's begin by assigning our variables. Let's say
that P1 = 151 mm Hg. What is V2?
Answers
Answer:
V2~0.4839M
Explanation:
We're going to use Boyles law to answer the question.
Boyle's law:
P1V1=P2V2
P1=151mmHg
P2=166mmHg
V1=0.532L
V2=?
V2=(P1 x V1)/P2
V2=(151 x 0.532)/166
V2~0.4839M
Hope it helps:)
Answer: C. unknown
Explanation: got it right on acellus
O rendimento de determinada máquina térmica é de 5%. Sabendo que essa máquina obedece as leis da termodinâmica e que ela recebe da fonte quente 5000J de energia, então o trabalho realizado por essa máquina a cada ciclo é de:
Answers
Answer:
Trabalho realizado por máquina térmica = 250 J
Explanation:
Dado
Eficiência da máquina térmica = 5% = 0,05
A eficiência é igual à proporção do trabalho realizado pela máquina térmica para o calor fornecido a ela
Por isso,
0,05 = Trabalho realizado por máquina térmica / 5000 J
Trabalho realizado por máquina térmica = 5000 J * 0,05 = 250 J
The reaction is run at two temperatures where temperature 1 is lower than temperature 2. Which relationship is correct for either rate constant (k1 or k2) or activation energy (Ea,1 and Ea,2)
Answers
Answer:
The answer is "[tex]K_1 < K_2[/tex]"
Explanation:
In the given question, the value of the [tex]K=Ae^{-\frac{Ea}{RT}}[/tex] and the [tex]T_1 <T_2[/tex]is the rate value which is the constant that is [tex]K_2>K_1[/tex]. As per the temperature value when its increase rate is constantly increasing. [tex]E_a[/tex] is activation energy it is not dependent on the temperature that why the answer is [tex]K_1 < K_2[/tex].
Which of the following represents an endothermic reaction?
Question 12 options:
A + B --> C + D + Heat
heat pack getting hot
Heat + A + B --> C + D
burning wood
Answers
Answer:
ANSWERThe second one would be one of the application of an endothermic reaction as because endothermic reaction always have the heat in the process to mix the reactants and form the products as here in a burning wood when the wood is supplied with heat then it change into products as ashes and smoke fumes So here due to the heat is involved to form the products thats the reaction is endothermic reaction.
Hope it helps
Which force is most responsible for binding together an atom’s protons and neutrons?
electrostatic
gravitational
nuclear
magnetic
Answers
Answer:
Hello There!!
Explanation:
I believe the answer is nuclear.
hope this helps,have a great day!!
~Pinky~
Answer:
C) Nuclear
Explanation:
Trust the process
Edge 2021
Warning eating fish caught in this lake may be dangerous to your health
Answers
Answer: it’s C hope that helps
Answer:
hmm I don't think its D because that doesn't have anything to do with your heath I don't think it's C either, probably not global warming so I think its A
Explanation:
I hope that helped :)
sorry if I'm wrong
I NEED HELP WITH CHEM PLEASE HAVE A DECENT ANSWER
Answers
Answer:
x is HCl because pH = 2 (acid and it reacted with Mg plus it turned litmus paper to red)
y is NaOH because pH = 10 (base and turned litmus paper to blue)
z is NaCl because pH = 7 (neutral and no reaction to litmus paper and Mg)
PLEASE HELP ASAP DUE SOON WILL MARK BRAINLIEST
Answers
NaOH+ N2O3---> ___+____
Answers
Answer:
NaOH+ N2O3---> NaNO2 + H2O
When crossing parents with genotypes Rr and rr what will be the percentage of the genotypes of the offspring
Answers
Answer:
Explanation:
Heterozygous cross with a hom.ozygous recessive yields the following results
50% rr (hom.ogyzous recessive)
50% Rr (heterozygous dominant)
A heterozygous cross with a homozygous recessive gives the following results: 50% rr (homozygous recessive) and 50% Rr (heterozygous dominant).
What is Parental crossing?Crossing over is a type of cellular process which occurs during the process of meiosis when chromosomes of the same type line up. When these two chromosomes – one from the mother and one from the father – line up, parts of the chromosome can be switched. Two chromosomes contain the same genes, but the genes may have different forms.
The organisms in this initial hybridization are called the parental or P generation. The progeny of the Rr x rr cross are called F1 generation which will have a heterozygous cross with the homozygous recessive giving the following results: 50% Rr (homozygous recessive) and 50% rr (heterozygous dominant)
A cross between two of the offspring in F1 generation would produce a new set of progeny called second filial generation (or F2 generation).
Thus, a heterozygous cross with a homozygous recessive gives the following results: 50% rr (homozygous recessive) and 50% Rr (heterozygous dominant).
Learn more about Parental crossing, here:
https://brainly.com/question/15033007
#SPJ2
define
compound?
covalent
Answers
Which radiation detection device is the best to use for measuring the presence of radiation in large moving objects where constant monitoring is impossible?
film badge
Geiger counter
cloud chamber
scintillation counter
Answers
Answer:
A film badge
Explanation:
The film badge dosimeter or film badge is a personal dosimeter used for monitoring cumulative radiation dose due to ionizing radiation. It of a photographic film and a holder. This film badge is used to determine or measure and record the radiation exposure as a result of radiations, x-rays, gamma rays and also beta particles.
All users of medical x-ray equipment (C-arms, fluoro units, therapy units) must wear badges. Those using larger quantities of radioactive materials will also be provided badges. The correct option is A.
What is film badge?Ionising radiation exposure is measured using photographic film for personnel monitoring purposes. A filter that protects part of the film from particular types of radiation may also be present in the film badge, which may contain two or three films with varying sensitivity levels.
A particular kind of passive dosimeter is the film badge. It comprises of a photographic emulsion film in a light-tight wrapping (kept in a holder) that changes optical density in response to ionising radiation. The holder, which also includes several filters (for calculating tissue equivalent amounts), is typically worn on the body's trunk.
So film badge is the device used most commonly today for monitoring the radiation exposure of personnel.
Thus the correct option is A.
To know more about film badge, visit;
https://brainly.com/question/14019863
#SPJ7