The answer based on matrix is (a) The rank of the matrix is 2. , (b) the matrix A is = [7, 6, 1, 1].
Let
a) The rank of the matrix is 2.
b) Considering the rank as r, we can write the matrix A as A = +...+uur, for some (not necessarily orthonormal) vectors u1,..., ur, and v1,..., Ur.
We know that the rank of the given matrix is 2.
It means that there must be two independent vectors in the rows or columns of A. We observe that columns 2 and 4 of the given matrix are linearly dependent on the first two columns. Hence, we can rewrite the matrix as:
We observe that the first two columns are linearly independent, which are u1 and u2.
Using these vectors, we can write the given matrix as A = u1vT1 + u2vT2, where vT1 and vT2 are row vectors.
A rank-one matrix can be written in this form, and we know that the rank of A is 2.
This means that there must be one more vector u3, and it is orthogonal to both u1 and u2.
We can compute it using the cross product of u1 and u2.
We get:
u3 = u1 × u2 = [2, -2, 0]T
Now we can compute vT1 and vT2 by finding the null space of the matrix formed by u1, u2, and u3.
We get:
vT1 = [-1, 0, 1, 0]andvT2 = [1, 1, 0, -1]
Finally, we can write the matrix A as A = u1vT1 + u2vT2 + u3vT3, where vT3 is a row vector given by:
vT3 = [0, -1, 0, 1]
Therefore, we have: A = (1, 2, 1, 1) (-1 0 1 0) + (2, 2, 2, 2) (1, 1, 0, -1) + (2, -2, 0, 0) (0, -1, 0, 1)= [3, 0, 1, -1]+ [4, 4, 2, 2]+ [0, 2, -2, 0]
= [7, 6, 1, 1]
To know more about matrix visit:
https://brainly.com/question/32622591
#SPJ11
Telephone calls arrive at an information desk at a rate of 25 per hour. What is the probability that the next call will arrive within 2 minutes? The probability that the next call will arrive within 2 minutes is ____.
(Round to four decimal places as needed.)
To calculate the probability of the next call arriving within 2 minutes, we need to convert the given arrival rate from hours to minutes. With a call arrival rate of 25 calls per hour, we can determine the average rate of calls per minute. Then, using the exponential distribution, we can calculate the probability of a call arriving within 2 minutes. The probability that the next call will arrive within 2 minutes is approximately 0.0083 or 0.83%.
the arrival rate of 25 calls per hour, we need to convert it to minutes. Since there are 60 minutes in an hour, the arrival rate would be 25/60 calls per minute, which simplifies to approximately 0.4167 calls per minute.
To calculate the probability that the next call will arrive within 2 minutes, we can use the exponential distribution formula: P(x ≤ t) = 1 - e^(-λt), where λ is the arrival rate and t is the time in minutes.
Plugging in the values, we have P(x ≤ 2) = 1 - e^(-0.4167 * 2). Using a calculator, this simplifies to approximately 0.0083 or 0.83%.
Therefore, the probability that the next call will arrive within 2 minutes is approximately 0.0083 or 0.83%.
learn more about probability here:brainly.com/question/31828911
#SPJ11
The standard approach to capacity planning assumes that the enterprise should FIRST
a. Suggest alternative plans for overcoming any mismatch
b. Examine forecast demand and translate this into a capacity needed
c. Find the capacity available in present facilities
d. Compare alternative plans and find the best
The standard approach to capacity planning assumes that the enterprise should FIRST examine forecast demand and translate this into a capacity needed.
option B.
What is capacity planning?Capacity planning is the process of determining the production capacity needed by an organization to meet changing demands for its products.
Capacity planning is the process of determining the potential needs of your project. The goal of capacity planning is to have the right resources available when you'll need them.
The first step in capacity planning is to examine the forecast demand, which includes analyzing historical data, market trends, customer expectations, and other relevant factors.
Thus, the standard approach to capacity planning assumes that the enterprise should FIRST examine forecast demand and translate this into a capacity needed.
Learn more about capacity planning here: https://brainly.com/question/29802728
#SPJ4
If R is the region in the first quadrant bounded by x-axis, 3x + y = 6 and y = 3x, evaluate ∫∫R 3y dA. (6 marks)
We need to evaluate the double integral ∫∫R 3y dA, where R is the region in the first quadrant bounded by the x-axis, the line 3x + y = 6, and the line y = 3x.The value of the double integral ∫∫R 3y dA is 9/2
To evaluate the double integral, we first need to find the limits of integration for x and y. From the given equations, we can find the intersection points of the lines.
Setting y = 3x in the equation 3x + y = 6, we get 3x + 3x = 6, which simplifies to 6x = 6. Solving for x, we find x = 1.
Next, substituting x = 1 into y = 3x, we get y = 3(1) = 3.
Therefore, the limits of integration for x are 0 to 1, and the limits of integration for y are 0 to 3.
The double integral can now be written as:
∫∫R 3y dA = ∫[0 to 1] ∫[0 to 3] 3y dy dx
Integrating with respect to y first, we get:
∫∫R 3y dA = ∫[0 to 1] [(3/2)y^2] [0 to 3] dx
= ∫[0 to 1] (9/2) dx
= (9/2) [x] [0 to 1]
= (9/2) (1 - 0)
= 9/2
Therefore, the value of the double integral ∫∫R 3y dA is 9/2.
To learn more about double integral : brainly.com/question/2289273
#SPJ11
Given the following sets, find the set (A UB) N (AUC). U = {1, 2, 3, . . . , 10} A = {1, 2, 3, 7} B = {1, 3, 10} C = {1, 2, 3, 6, 8}
Therefore, the set (A UB) N (AUC) is {1, 2, 3, 7}.
To find the set (A UB) N (AUC), we first need to find the union of sets A and B, denoted as A UB. Then, we can find the union of sets A and C, denoted as AUC. Finally, we take the intersection of the resulting sets A UB and AUC.
First, let's find the union of sets A and B, denoted as A UB:
A UB = A U B
= {1, 2, 3, 7} U {1, 3, 10}
= {1, 2, 3, 7, 10}
Next, let's find the union of sets A and C, denoted as AUC:
AUC = A U C
= {1, 2, 3, 7} U {1, 2, 3, 6, 8}
= {1, 2, 3, 6, 7, 8}
Now, we can find the intersection of sets A UB and AUC:
(A UB) N (AUC) = {1, 2, 3, 7, 10} N {1, 2, 3, 6, 7, 8}
= {1, 2, 3, 7}
To know more about sets,
https://brainly.com/question/31432154
#SPJ11
Let the random variable X be normally distributed with the mean ? and standard deviation ?. Which of the following statements is correct?
A. All of the given statements are correct. B. If the random variable X is normally distributed with parameters ? and ?, then a large ? implies that a value of X far from ? may well be observed, whereas such a value is quite unlikely when ? is small. C. The statement that the random variable X is normally distributed with parameters ? and ? is often abbreviated X ~ N(?, ?). D. If the random variable X is normally distributed with parameters ? and ?, then E(X) = ? and Var(X) = ?^2. E. The graph of any normal probability density function is symmetric about the mean and bell-shaped, so the center of the bell (point of symmetry) is both the mean of the distribution and the median.
Given the random variable X that is normally distributed with the mean μ and standard deviation σ.
The correct statement among the following options is D.
If the random variable X is normally distributed with parameters μ and σ, then E(X) = μ
and Var(X) = σ².
The normal distribution is the most widely recognized continuous probability distribution, and it is used to represent a variety of real-world phenomena.
A typical distribution, also known as a Gaussian distribution, is characterized by two parameters:
its mean (μ) and its standard deviation (σ).
The mean (μ) of any normal probability distribution represents the middle of the bell curve, and its standard deviation (σ) reflects the degree of data deviation from the mean (μ).
So, any normal probability density function is symmetric about the mean and bell-shaped, and the middle of the bell is both the mean of the distribution and the median.
Therefore, if the random variable X is normally distributed with parameters μ and σ, then E(X) = μ
and Var(X) = σ².
To know more about probability distribution, visit:
https://brainly.com/question/29062095
#SPJ11
A psychologist studied self-esteem scores and found the data set
to be normally distributed with a mean of 80 and a standard
deviation of 4. What is the z-score that cuts off the bottom 33% of
this di
The z-score that cuts off the bottom 33% of the distribution is approximately -0.439.
To find the z-score that cuts off the bottom 33% of the distribution, we use the standard normal distribution table or a statistical calculator.
What is the z-score?The z-score shows the number of standard deviations a particular value is from the mean.
To find the z-score in this case, we shall find the value on the standard normal distribution that corresponds to the area of 0.33 to the left of it.
Using a standard normal distribution table, we estimate that the z-score corresponds to an area of 0.33 (33%) to the left ≈ -0.439.
Therefore, the z-score that cuts off the bottom 33% of the distribution is approx. -0.439.
Learn more about z-score at brainly.com/question/30765368
#SPJ1
Question completion:
A psychologist studied self-esteem scores and found the data set to be normally distributed with a mean of 80 and a standard deviation of 4.
What is the z-score that cuts off the bottom 33% of this distribution?
A consumer purchases two goods, food and clothing. The
utility function is U(x, y) = √xy, where x denotes the amount of
food consumes and y the amount of clothing. The marginal utilities
are MUx = �
The given utility function U(x, y) = √xy yields the marginal utilities as MUx = √xy/2 and MUy = √xy/2 respectively.
In this question, The utility function is U(x, y) = √xy
The consumer purchases two goods, food and clothing where x denotes the amount of food consumes and y denotes the amount of clothing.
To find out the marginal utility of X (MUx) and the marginal utility of Y (MUy), we will take the first partial derivative of U(x, y) with respect to x and y respectively.
∂U/∂x = y/2(√xy) = (y/2)√x/y = √xy/2 = MUx
The marginal utility of X (MUx) is √xy/2.
∂U/∂y = x/2(√xy) = (x/2)√y/x = √xy/2 = MUy
The marginal utility of Y (MUy) is √xy/2.
Learn more about utility function at:
https://brainly.com/question/32538284
#SPJ11
1. A variable force of 4√ newtons moves a particle along a straight path wien it is a meters from the origin. Calculate the work done in moving the particle from z=4 to z = 16.
2. A spring has a natural length of 40 cm. If a 60-N force is required to keep the spring compressed 10 cm, how much work is done during this compression? How much work is required to compress the spring to 1 a length of 25 cm?
3. A circular swimming pool has a diameter of 24 ft, the sides are 5 ft high, and the depth of the water is 4 ft. How much work is required to pump all of the water out over the side? (Use the fact that water weighs 62.5 lb/ft³.
The result of this integral will give us the work done in moving the particle from z = 4 to z = 16.
To calculate the work done in moving the particle from z = 4 to z = 16, we need to integrate the variable force over the displacement. The work done by a variable force is given by the formula W = ∫[a to b] F(z) dz
In this case, the force F(z) is 4√ newtons and the displacement dz is the change in position from z = 4 to z = 16. To find the work done, we integrate the force with respect to z over the given limits: W = ∫[4 to 16] 4√ dz
The result of this integral will give us the work done in moving the particle from z = 4 to z = 16.
To calculate the work done in compressing a spring, we use the formula:
W = (1/2)kx^2
where k is the spring constant and x is the displacement from the natural length of the spring.
In the first case, a 60-N force is required to keep the spring compressed 10 cm. This means that the displacement x is 10 cm = 0.1 m. The spring constant, k, can be calculated by dividing the force by the displacement:
k = F/x = 60 N / 0.1 m = 600 N/m
Using this value of k and the displacement x, we can calculate the work done:
W = (1/2)(600 N/m)(0.1 m)^2 = 3 J
In the second case, the spring is compressed to a length of 25 cm = 0.25 m. Using the same spring constant k, we can calculate the work done:
W = (1/2)(600 N/m)(0.25 m)^2 = 9 J
To calculate the work required to pump all of the water out of the circular swimming pool, we need to consider the weight of the water and the height it needs to be lifted. The volume of the pool can be calculated using the formula for the volume of a cylinder:
V = πr^2h
where r is the radius and h is the height. In this case, the radius is half of the diameter, so r = 12 ft. The height of the water is 4 ft.
The weight of the water can be calculated by multiplying the volume by the density of water Weight = Volume × Density = πr^2h × Density
The work required to lift the water out is equal to the weight of the water multiplied by the height it needs to be lifted W = Weight × Height = πr^2h × Density × Height
Substituting the given values, we can calculate the work required to pump the water out of the pool.
Ensure that all units are consistent throughout the calculations to obtain the correct numerical values.
To know more about length click here
brainly.com/question/30625256
#SPJ11
2. Let M = {m - 10, 2, 3, 6}, R = {4,6,7,9} and N = {x|x is natural number less than 9} . a. Write the universal set b. Find [MC (N-R)] × N
a. Universal set `[MC(N-R)] × N` is equal to `
{(-8, 1), (3, 1), (6, 1), (-8, 2), (3, 2), (6, 2), (-8, 3), (3, 3), (6, 3), (-8, 4), (3, 4), (6, 4), (-8, 5), (3, 5), (6, 5), (-8, 6), (3, 6), (6, 6), (-8, 7), (3, 7), (6, 7), (-8, 8), (3, 8), (6, 8)}`.
a. Universal set
The universal set of a collection is the set of all objects in the collection. Given that
`N = {x|x is a natural number less than 9}`,
the universal set for this collection is the set of all natural numbers which are less than 9.i.e.
`U = {1,2,3,4,5,6,7,8}`
b. `[MC(N-R)] × N`
Let `M = {m - 10, 2, 3, 6}`,
`R = {4,6,7,9}` and
`N = {x|x is a natural number less than 9}`.
Then,
`N-R = {1, 2, 3, 5, 8}`
and
`MC(N-R) = M - (N-R) = {m - 10, 3, 6}`
Therefore,
`[MC(N-R)] × N = {(m - 10, n), (3, n), (6, n) : m - 10 ∈ M, n ∈ N}`
Now, substituting N, we get:
`[MC(N-R)] × N = {(-8, 1), (3, 1), (6, 1), (-8, 2), (3, 2), (6, 2), (-8, 3), (3, 3), (6, 3), (-8, 4), (3, 4), (6, 4), (-8, 5), (3, 5), (6, 5), (-8, 6), (3, 6), (6, 6), (-8, 7), (3, 7), (6, 7), (-8, 8), (3, 8), (6, 8)}`
Therefore,
`[MC(N-R)] × N = {(-8, 1), (3, 1), (6, 1), (-8, 2), (3, 2), (6, 2), (-8, 3), (3, 3), (6, 3), (-8, 4), (3, 4), (6, 4), (-8, 5), (3, 5), (6, 5), (-8, 6), (3, 6), (6, 6), (-8, 7), (3, 7), (6, 7), (-8, 8), (3, 8), (6, 8)}`
Thus,
`[MC(N-R)] × N` is equal to
` {(-8, 1), (3, 1), (6, 1), (-8, 2), (3, 2), (6, 2), (-8, 3), (3, 3), (6, 3), (-8, 4), (3, 4), (6, 4), (-8, 5), (3, 5), (6, 5), (-8, 6), (3, 6), (6, 6), (-8, 7), (3, 7), (6, 7), (-8, 8), (3, 8), (6, 8)}`.
To know more about Universal set visit:
https://brainly.com/question/24728032
#SPJ11
Solve the following equation: d²y/dx²+2dy/dx+1=0, by conditions: y(0)=1, dy/dx=0 by x=0.
The equation is a second-order linear ordinary differential equation. By solving it with the given initial conditions, the solution is y(x) = e^(-x).
To solve the given equation, we can assume that the solution is of the form y(x) = e^(mx), where m is a constant. Taking the first and second derivatives of y(x) with respect to x, we have:
dy/dx = me^(mx)
d²y/dx² = m²e^(mx)
Substituting these derivatives into the original equation, we get:
m²e^(mx) + 2me^(mx) + 1 = 0
Dividing the equation by e^(mx) (which is nonzero for all x), we obtain a quadratic equation in terms of m:
m² + 2m + 1 = 0
This equation can be factored as (m + 1)² = 0, leading to the solution m = -1.
Therefore, the general solution to the differential equation is y(x) = Ae^(-x) + Be^(-x), where A and B are constants determined by the initial conditions.
Applying the initial condition y(0) = 1, we have 1 = Ae^(0) + Be^(0), which simplifies to A + B = 1.
Differentiating y(x) with respect to x and applying the second initial condition, we have 0 = -Ae^(0) - Be^(0), which simplifies to -A - B = 0.
Solving these two equations simultaneously, we find A = 0.5 and B = 0.5.
Therefore, the solution to the given differential equation with the given initial conditions is y(x) = 0.5e^(-x) + 0.5e^(-x), which simplifies to y(x) = e^(-x).
To learn more about differential equation click here brainly.com/question/31492438
#SPJ11
In Problems 31-38, find the midpoint of the line segment joining the points P₁ and P2.
31. P₁ = (3, 4); P₂ = (5, 4)
33. P₁ = (−1, 4); P₂ = (8, 0) 35. P₁ = (7, −5); P₂ = (9, 1) 37. P₁ = (a, b); P2 = (0, 0)
the midpoint of the line segment joining P₁ and P₂ is (a / 2, b / 2).
To find the midpoint of a line segment joining two points P₁ and P₂, we can use the midpoint formula:
Midpoint = ((x₁ + x₂) / 2, (y₁ + y₂) / 2)
Let's find the midpoints for each problem:
31. P₁ = (3, 4); P₂ = (5, 4)
Using the midpoint formula:
Midpoint = ((3 + 5) / 2, (4 + 4) / 2)
= (8 / 2, 8 / 2)
= (4, 4)
Therefore, the midpoint of the line segment joining P₁ and P₂ is (4, 4).
33. P₁ = (-1, 4); P₂ = (8, 0)
Using the midpoint formula:
Midpoint = ((-1 + 8) / 2, (4 + 0) / 2)
= (7 / 2, 4 / 2)
= (3.5, 2)
Therefore, the midpoint of the line segment joining P₁ and P₂ is (3.5, 2).
35. P₁ = (7, -5); P₂ = (9, 1)
Using the midpoint formula:
Midpoint = ((7 + 9) / 2, (-5 + 1) / 2)
= (16 / 2, -4 / 2)
= (8, -2)
Therefore, the midpoint of the line segment joining P₁ and P₂ is (8, -2).
37. P₁ = (a, b); P₂ = (0, 0)
Using the midpoint formula:
Midpoint = ((a + 0) / 2, (b + 0) / 2)
= (a / 2, b / 2)
To know more about midpoint visit;
brainly.com/question/31339034
#SPJ11
Find all solutions to the following system of linear equations: 4x4 1x₁ + 1x2 + 1x3 2x3 + 6x4 - 1x1 -2x1 4x4 2x2 + 0x3 + 4x4 - 2x1 + 2x₂ + 0x3 Note: 1x₁ means just x₁, and similarly for the ot
An approach for resolving systems of linear equations is the Gauss elimination method, commonly referred to as Gaussian elimination. It entails changing an equation system into an analogous system that is simple.
We can build the augmented matrix for the system of linear equations and apply row operations to get the reduced row-echelon form in order to locate all solutions to the system of linear equations.
[ 4 1 1 0 | 0 ]
[-1 -2 0 2 | 0 ]
[ 0 2 0 4 | 0 ]
[ 0 0 4 2 | 0 ]
We can convert this matrix to its reduced row-echelon form using row operations:
[ 1 0 0 0 | 0 ]
[ 0 1 0 2 | 0 ]
[ 0 0 1 -1 | 0 ]
[ 0 0 0 0 | 0 ]
From this reduced row-echelon form, we can see that there are infinitely many solutions to the system. We can express the solutions in parametric form
x₁ = t
x₂ = -2t
x₃ = t
x₄ = s
where t and s are arbitrary constants.
To know more about the Gauss Elimination Method visit:
https://brainly.com/question/30763804
#SPJ11
1.
You measure the cross sectional area for the design or a roadway, for a section of the road. Using
the average end area determine the volume (in Cubic Yards) of cut and fill for this portion of
roadway: (10 points)
Station
Area Cut
Area Fill
12+25
185 sq.ft.
12+75
165 sq.ft.
13+25
106 sq.ft.
0 sq.ft.
13+50
61 sq.ft.
190 sq.ft.
13+75
0 sq.ft.
213 sq.ft.
14+25
286 sq.ft.
14+75
338 sq.ft.
The volume of cut = 1000.66 Cu. Yd. The volume of fill = 518.6 Cu. Yd.
Step 1: Calculation of cross sectional area of each segment of the road:Cross sectional area of road = Area at station x 27.77 (width of road)Segment Station Area Cut Area Fill Cross sectional area of road 1 12+25 185 sq.ft. 0 sq.ft. 5129.45 sq.ft. 2 12+75 165 sq.ft. 190 sq.ft. 5457.15 sq.ft. 3 13+25 106 sq.ft. 61 sq.ft. 3992.62 sq.ft. 4 13+50 0 sq.ft. 213 sq.ft. 5905.01 sq.ft. 5 14+25 286 sq.ft. 0 sq.ft. 7940.82 sq.ft. 6 14+75 338 sq.ft. 0 sq.ft. 9382.53 sq.ft.Step 2: Calculation of average end area:Average end area = [(Area of cut at station 1 + Area of fill at last station)/2]Segment Area of Cut at station 1 .
Area of fill at last station Average end area 1 185 sq.ft. 190 sq.ft. 187.5 sq.ft. 2 165 sq.ft. 0 sq.ft. 82.5 sq.ft. 3 106 sq.ft. 213 sq.ft. 159.5 sq.ft. 4 0 sq.ft. 0 sq.ft. 0 sq.ft. 5 286 sq.ft. 0 sq.ft. 143 sq.ft. 6 338 sq.ft. 0 sq.ft. 169 sq.ft.Step 3: Calculation of volume of cut and fill for each segment of the road:Volume of cut = Area of cut x Length of segment x 1/27Volume of fill = Area of fill x Length of segment x 1/27
Segment Area of cut at station 1 Area of fill at last station Average end area Length of segment Volume of cut Volume of fill 1 185 sq.ft. 190 sq.ft. 187.5 sq.ft. 50 ft 347.22 Cu. Yd. 355.91 Cu. Yd. 2 165 sq.ft. 0 sq.ft. 82.5 sq.ft. 50 ft 154.1 Cu. Yd. 0 Cu. Yd. 3 106 sq.ft. 213 sq.ft. 159.5 sq.ft. 25 ft 80.57 Cu. Yd. 162.69 Cu. Yd. 4 0 sq.ft. 0 sq.ft. 0 sq.ft. 25 ft 0 Cu. Yd. 0 Cu. Yd. 5 286 sq.ft. 0 sq.ft. 143 sq.ft. 50 ft 268.06 Cu. Yd. 0 Cu. Yd. 6 338 sq.ft. 0 sq.ft. 169 sq.ft. 25 ft 160.71 Cu. Yd. 0 Cu. Yd.
Total Volume of Cut = 1000.66 Cu. Yd.Total Volume of Fill = 518.6 Cu. Yd.
Summary: The volume of cut = 1000.66 Cu. Yd. The volume of fill = 518.6 Cu. Yd.
learn more about volume click here:
https://brainly.com/question/463363
#SPJ11
if the first 5 students expect to get the final average of 95, what would their final tests need to be.
If the first 5 students expect to get the final average of 95. The final test scores are equal to 475 minus the sum of the previous scores. If we suppose the previous scores sum up to a total of y, then the final test scores required will be: F = 5 × 95 − y, Where F represents the final test scores required.
The answer to this question is found using the formula of average which is total of all scores divided by the number of scores available. This can be written in form of an equation.
Average = (sum of all scores) / (number of scores).
The sum of all scores is simply found by adding all the scores together. For the five students to obtain an average of 95, the sum of their scores has to be:
Sum of scores = 5 × 95 = 475.
Next, we can find out what each student needs to score by solving for the unknown test scores.
To do that, let’s suppose the final test scores for the five students are x₁ x₂, x₂, x₄, and x₅.
Then we have: x₁ + x₂ + x₃ + x₄ + x₅ = 475.
The final test scores are equal to 475 minus the sum of the previous scores.
If we suppose the previous scores sum up to a total of y, then the final test scores required will be: F = 5 × 95 − y, Where F represents the final test scores required.
To know more about final average, refer
https://brainly.com/question/130657
#SPJ11
the units of the momentum of the t-shirt are the units of the integral ∫t=tlt=0f(t)dt , where f(t) has units of n and t has units of s . given that 1n=1kg⋅m/s2 , the units of momentum are:
Given that f(t) has units of N and t has units of s. And 1N = 1kg.m/s²Therefore the dimensions of f(t) are, [f(t)] = N.As the dimensions of t are [t] = s.
Now the integral of f(t) over time t=0 to t=tl, is given by;`[∫_0^(tl)]f(t)dt`The units of momentum of the t-shirt are the units of the integral`∫_0^(tl) f(t) dt`Where f(t) has units of N and t has units of s.
According to the formula for momentum, p = mv where p is the momentum of the object of mass m moving with velocity v.
The dimensions of momentum are`[M][L]/[T]^2`Where `[M]` is the dimension of mass, `[L]` is the dimension of length, and `[T]` is the dimension of time.As N = kg.m/s², we can write the dimensions of
f(t) as;N = kg.m/s²`[f(t)] = [kg.m]/[s²]`
We can now substitute these dimensions into the integral and simplify as follows;
`[p] = [∫_0^(tl) f(t) dt]
= [f(t)][t]
= [N][s]
= [kg.m/s²] x [s]
= [kg.m/s]`
Therefore, the units of momentum are kg.m/s.
To know more about momentum , visit;
https://brainly.com/question/18798405
#SPJ11
Show that δ(x^2-a^2)=1/2a[δ(x-a)+ δ(x+a)]
δ(c0sθ- cosθ)= δ(θ-θ’)/sin θ’= δ (θ- θ’)/ sin θ
By using Dirac delta function, δ(c0sθ- cosθ)= δ(θ-θ’)/sin θ’= δ (θ- θ’)/ sin θ.
Here's how to show that δ(x^2-a^2)=1/2a[δ(x-a)+ δ(x+a)]
To show that δ(x^2-a^2)=1/2a[δ(x-a)+ δ(x+a)],
we can use the definition of Dirac delta function.
Dirac delta function is defined as follows:∫δ(x)dx=1and 0 if x≠0
In order to solve the given expression, we have to take the integral of both sides from negative infinity to infinity, which is given below:∫δ(x^2-a^2)dx=∫1/2a[δ(x-a)+ δ(x+a)]dx
To compute the left-hand side, we use a substitution u=x^2-a^2 du=2xdxWhen x=-a, u=a^2-a^2=0 and when x=a, u=a^2-a^2=0.
Therefore,-∞∫∞δ(x^2-a^2)dx=-∞∫∞δ(u)1/2adx=1/2a
Similarly, the right-hand side becomes:∫1/2a[δ(x-a)+ δ(x+a)]dx=1/2a∫δ(x-a)dx +1/2a∫δ(x+a)dx=1/2a + 1/2a=1/2a
Therefore,∫δ(x^2-a^2)dx=∫1/2a[δ(x-a)+ δ(x+a)]dxHence, δ(x^2-a^2)=1/2a[δ(x-a)+ δ(x+a)].
Next, we can show that δ(c0sθ- cosθ)= δ(θ-θ’)/sin θ’= δ (θ- θ’)/ sin θ as follows:We know that cosθ = cosθ' which implies θ=θ'+2nπ or θ=-θ'-2nπ.
Therefore, c0sθ-cosθ'=c0s(θ'-2nπ)-cosθ'=c0sθ'-cosθ' = sinθ'c0sθ-sinθ'cosθ'.
We can use the following identity to simplify the above expression:c0sA-B= c0sAcosB-sinAsinB
Therefore,c0sθ-cosθ' =sinθ'c0sθ-sinθ'cosθ'=sinθ'[c0sθ-sinθ'cosθ']/sinθ' =δ(θ-θ')/sinθ'
Hence,δ(c0sθ- cosθ)= δ(θ-θ’)/sin θ’= δ (θ- θ’)/ sin θ.
Learn more about Dirac delta function
brainly.com/question/32558176
#SPJ11
Giving a test to a group of students, the grades and gender are summarized below
A B C Total
Male 19 3 4 26
Female 16 15 17 48
Total 35 18 21 74
If one student is chosen at random,
Find the probability that the student did NOT get an "C"
In this case, it is found to be approximately 0.7162, or 71.62%. This means that if we randomly select a student from the group, there is a 71.62% chance that the student did not receive a "C" grade.
The probability that a randomly chosen student did not get a "C" grade can be calculated by finding the ratio of the number of students who did not get a "C" to the total number of students. In this case, we can sum up the counts of grades A and B for both males and females, and then divide it by the total number of students.
The number of students who did not get a "C" grade is obtained by adding the counts of grades A and B, which is 19 (males with grade A) + 3 (males with grade B) + 16 (females with grade A) + 15 (females with grade B) = 53. The total number of students is given as 74. Therefore, the probability that a randomly chosen student did not get a "C" grade is 53/74, or approximately 0.7162.
To calculate the probability, we divide the number of students who did not get a "C" grade (53) by the total number of students (74). This probability represents the likelihood of randomly selecting a student who falls into the category of not receiving a "C" grade. In this case, it is found to be approximately 0.7162, or 71.62%. This means that if we randomly select a student from the group, there is a 71.62% chance that the student did not receive a "C" grade.
Learn more about Grade:
brainly.com/question/29618342
#SPJ11
:Q3) For the following data 50-54 55-59 60-64 65-69 70-74 75-79 80-84 7 10 16 12 9 3 Class Frequency 3
* :e) The standard deviation is 7.5668 O 7.6856 O 7.6658 7.8665 O none of all above O
The standard deviation for the given data is 7.5668.
To calculate the standard deviation, we need to follow these steps:
Calculate the mean (average) of the data. The sum of the products of each class midpoint and its corresponding frequency is 625.
Calculate the deviation of each class midpoint from the mean. The deviations are as follows: -15, -10, -5, 0, 5, 10, 15.
Square each deviation. The squared deviations are 225, 100, 25, 0, 25, 100, 225.
Multiply each squared deviation by its corresponding frequency. The products are 675, 300, 75, 0, 225, 300, 675.
Sum up all the products of squared deviations. The sum is 2250.
Divide the sum by the total frequency minus 1. Since the total frequency is 50, the denominator is 49.
Take the square root of the result from step 6. The square root of 45.9184 is approximately 7.5668.
Therefore, the standard deviation for the given data is 7.5668.
Learn more standard deviation here: brainly.com/question/29115611
#SPJ11
A continuous random variable X has the following cdf:
F(x)=0 for x < 0F(x=x3for 0≤x≤2F(x)=1 for x>2
(a) Find the pdf of the function.
(b) Find P(X≥3)
(c) find P(X≤1)
(a)The pdf of the function is:
f(x) = 1/3 for 0 ≤ x ≤ 2
f(x) = 0 otherwise
(b)P(X ≥ 3) = 1
(c) P(X ≤ 1) is equal to 1/3.
(a) To find the probability density function (pdf) of a continuous random variable based on its cumulative distribution function (cdf), we can take the derivative of the cdf with respect to x.
Given the cdf F(x):
F(x) = 0 for x < 0
F(x) = x/3 for 0 ≤ x ≤ 2
F(x) = 1 for x > 2
To find the pdf f(x), we differentiate the cdf in the intervals where it is defined:
For 0 ≤ x ≤ 2:
f(x) = d/dx (F(x)) = d/dx (x/3) = 1/3
For x < 0 and x > 2, the pdf is zero since the cdf is constant in those intervals.
Therefore, the pdf of the function is:
f(x) = 1/3 for 0 ≤ x ≤ 2
f(x) = 0 otherwise
(b) To find P(X ≥ 3), we need to calculate the probability that the random variable X is greater than or equal to 3. Since the cdf is defined as 1 for x > 2, the probability P(X ≥ 3) is equal to 1.
P(X ≥ 3) = 1
(c) To find P(X ≤ 1), we need to calculate the probability that the random variable X is less than or equal to 1. Since the cdf is defined as 0 for x < 0 and x/3 for 0 ≤ x ≤ 2, we can use the cdf values to calculate the probability:
P(X ≤ 1) = F(1) = 1/3
Therefore, P(X ≤ 1) is equal to 1/3.
To know more about function refer here:
https://brainly.com/question/30721594#
#SPJ11
Calculate the equilibrium/stationary state, to two decimal places, of the difference equation
xt+1 = 2xo + 4.2.
Round your answer to two decimal places. Answer:
We must work out the value of x that satisfies the provided difference equation in order to determine its equilibrium or stationary state:
x_{t+1} = 2x_t + 4.2
What is Equilibrium?
In the equilibrium state, the value of x remains constant over time, so we can set x_{t+1} equal to x_t:
x = 2x + 4.2
To solve for x, we rearrange the equation:
x - 2x = 4.2
Simplifying, we get:
-x = 4.2
Multiplying both sides by -1, we have:
x = -4.2
The equilibrium or stationary state of the given difference equation is roughly -4.20, rounded to two decimal places.
Learn more about Equilibrium here brainly.in/question/11392505
#SPJ4
Solve Bernoulli's equation dy XC +y=(x dx n (x² In(x))y², x>0
The general solution to the equation is y = (c/x)^(1/(n-1))*(x^n In(x))^n, where c is an arbitrary constant.
To solve the equation, we can use the following steps:
1. Rewrite the equation in standard form. The equation can be rewritten in standard form as dy/dx + (1-n)y = x^n In(x)y^n.
2. Use the integrating factor method. The integrating factor for the equation is e^((1-n)x). Multiplying both sides of the equation by the integrating factor gives e^((1-n)x)dy/dx + (1-n)e^((1-n)x)y = x^n In(x)e^((1-n)x)y^n.
3. Integrate both sides of the equation. Integrating both sides of the equation gives e^((1-n)x)y = c*x^n In(x)y^n + K, where K is an arbitrary constant.
4. Divide both sides of the equation by y^n. Dividing both sides of the equation by y^n gives e^((1-n)x) = c*x^n In(x) + K/y^n.
5. Solve for y. Taking the natural logarithm of both sides of the equation gives (1-n)x = n In(x) + ln(K/y^n).
6. Exponentiate both sides of the equation. Exponentiating both sides of the equation gives (1-n)x^n = nx^n In(x) * K/y^n.
7. Simplify the right-hand side of the equation. Simplifying the right-hand side of the equation gives K/y^n = (1/n) * x^(n-1) In(x).
8. Solve for y. Taking the nth root of both sides of the equation gives y = (c/x)^(1/(n-1))*(x^n In(x))^n.
This is the general solution to the equation. The specific solution to the equation can be found by substituting the initial conditions into the general solution.
Learn more about arbitrary constant here:
brainly.com/question/29093928
#SPJ11
Section Total Score Score 3. Carry out two iterations of the convergent Jacobi iterative method and Gauss-Seidel iterative method, starting with (O) = 0, for the following systems of equations 3x + x2 - xy = 3 x1+2x2 - 4x3 = -1 x1 +4x2 + x3 = 6
The actual values may differ slightly due to rounding errors or different initial guesses. Also note that the convergence of the iterative methods depends on the properties of the coefficient matrix, and may not always converge or converge to the correct solution.
The two iterations of the Jacobi and Gauss-Seidel iterative methods for the given system of equations:
Starting with x⁰ = [0, 0, 0]:
Jacobi method:
Iteration 1:
x₁¹ = (3 - x₂⁰ + x₃⁰) / 3
≈ 1.0
x₂¹ = (-1 - x₁⁰ + 4x₃⁰)) / 4
≈ -0.25
x₃¹ = (6 - x₁⁰ - 4x₂⁰) / 1
≈ 6.0
x¹ ≈ [1.0, -0.25, 6.0]
Iteration 2:
x₁² = (3 - x₂¹ + x₃¹) / 3
≈ 2.75
x₂² = (-1 - x₁¹ + 4x₃¹) / 4
≈ -1.44
x₃²) = (6 - x₁¹ - 4x₂¹) / 1
≈ 0.06
x² ≈ [2.75, -1.44, 0.06]
Gauss-Seidel method:
Iteration 1:
x1¹ = (3 - x2⁰ + x3⁰) / 3 ≈ 1.0
x2¹ = (-1 - x1¹ + 4x3⁰) / 4 ≈ -0.75
x3¹ = (6 - x1¹ - 4x2¹) / 1 ≈ 4.25
x¹ ≈ [1.0, -0.75, 4.25]
Iteration 2:
x1² = (3 - x2¹ + x3¹) / 3 ≈ 1.917
x2² = (-1 - x1² + 4x3¹) / 4 ≈ -0.845
x3² = (6 - x1²) - 4x2²)) / 1 ≈ 4.447
x² ≈ [1.917, -0.845, 4.447]
Thus, the actual values may differ slightly due to rounding errors or different initial guesses. Also note that the convergence of the iterative methods depends on the properties of the coefficient matrix, and may not always converge or converge to the correct solution.
Learn more about the matrix visit:
https://brainly.com/question/1279486
#SPJ4
Write another function that has the same graph as y=2 cos(at) - 1. 2. Describe how the graphs of y = 2 cos(x) - 1 and y=2c08(2x) - 1 are alike and how they are different IM 6.16 The height in teet of a seat on a Ferris wheel is given by the function h(t) = 50 sin ( 35) + 60. Time t is measured in minutes since the Ferris wheel started 1. What is the diameter of the Ferris wheel? How high is the center of the Ferris wheel? 2. How long does it take for the Ferris wheel to make one full revolution?
1. Another function that has the same graph as y = 2 cos(at) - 1 is y = 2 cos(0.5t) - 1.
2. The graphs of y = 2 cos(x) - 1 and y = 2 cos(2x) - 1 are alike in shape and amplitude, but differ in frequency or period.
3. The diameter of the Ferris wheel is 100 feet, and the center of the Ferris wheel is 110 feet high.
4. It takes the Ferris wheel approximately 1.71 minutes to make one full revolution.
To write another function that has the same graph as y = 2 cos(at) - 1, we need to adjust the amplitude and the period of the cosine function.
The amplitude determines the vertical stretching or compressing of the graph, while the period affects the horizontal stretching or compressing.
Let's consider the function y = A cos(Bt) - 1, where A represents the amplitude and B represents the frequency.
In the given function y = 2 cos(at) - 1, the amplitude is 2 and the frequency is a.
To create a function with the same graph, we can choose values for the amplitude and frequency that preserve the same characteristics.
For example, a function with an amplitude of 4 and a frequency of 0.5 would have the same shape as y = 2 cos(at) - 1.
Thus, a possible function with the same graph could be y = 4 cos(0.5t) - 1.
The graphs of y = 2 cos(x) - 1 and y = 2 cos(2x) - 1 are alike in terms of their shape and general behavior.
They both represent cosine functions with an amplitude of 2 and a vertical shift of 1 unit downward.
This means they have the same range and oscillate between a maximum value of 1 and a minimum value of -3.
However, the graphs differ in terms of their frequency or period.
The function y = 2 cos(x) - 1 has a period of 2π, while y = 2 cos(2x) - 1 has a period of π.
The function y = 2 cos(2x) - 1 oscillates twice as fast as y = 2 cos(x) - 1. This means that in the same interval of x-values, the graph of y = 2 cos(2x) - 1 completes two full oscillations, while the graph of y = 2 cos(x) - 1 completes only one.
6.16:
To determine the diameter of the Ferris wheel, we need to find the amplitude of the sine function.
In the given function h(t) = 50 sin(35t) + 60, the amplitude is 50.
The diameter of the Ferris wheel is equal to twice the amplitude, so the diameter is [tex]2 \times 50 = 100[/tex] feet.
The height of the center of the Ferris wheel can be calculated by adding the vertical shift to the amplitude.
In this case, the height of the center is 50 + 60 = 110 feet.
The time taken for the Ferris wheel to make one full revolution is equal to the period of the sine function.
The period is calculated as the reciprocal of the frequency (35 in this case), so the period is 1/35 minutes.
Therefore, it takes the Ferris wheel 1/35 minutes or approximately 1.71 minutes to make one full revolution.
For similar question on function.
https://brainly.com/question/30127596
#SPJ8
Find the critical value for a right-tailed test with a = 0.025, degrees of freedom in the numerator = 20, and degrees of freedom in the denominator = 25. Click the icon to view the partial table of critical values of the F-distribution What is the critical value? 0.25.20.25 (Round to the nearestyhundredth as needed.)
Without access to an F-distribution table or statistical software, it is not possible to provide the exact critical value for the given parameters: α = 0.025, df1 = 20, and df2 = 25.
How to find the critical value for a right-tailed test with given degrees of freedom and significance level?To find the critical value for a right-tailed test, we need to consult the F-distribution table or use statistical software. In this case, the given information includes a significance level (α) of 0.025, 20 degrees of freedom in the numerator (df1), and 25 degrees of freedom in the denominator (df2).
Using the provided values, we can determine the critical value by referring to the F-distribution table or using statistical software. However, without access to the table or software, I am unable to provide the exact critical value.
Therefore, I recommend consulting an F-distribution table or using statistical software to find the critical value for a right-tailed test with the given parameters: α = 0.025, df1 = 20, and df2 = 25.
Learn more about right-tailed test
brainly.com/question/32668212
#SPJ11
All vectors are in R Check the true statements below: A. For any scalar c, ||cv|| = c||v||. B. If x is orthogonal to every vector in a subspace W, then x is in W-. □c. If ||u||² + ||v||² = ||u + v||², then u and v are orthogonal. OD. For an m × ʼn matrix A, vectors in the null space of A are orthogonal to vectors in the row space of A. OE. u. vv.u= 0.
The following true statements can be concluded from the given information about the vectors. All vectors are in R Check the true statements below: A. For any scalar c, ||cv|| = c||v||. (True)B., The statement E is false.
If x is orthogonal to every vector in a subspace W, then x is in W-. (True)c. If ||u||² + ||v||² = ||u + v||², then u and v are orthogonal. (True)OD. For an m × ʼn matrix A, vectors in the null space of A are orthogonal to vectors in the row space of A. (False)OE. u. vv.u= 0. (False)Justification:
Given that all vectors are in R. Therefore, the first statement can be proved as follows:||cv|| = c||v||Since, c is a scalar value and v is a vector||cv|| = c||v|| is always true for any given vector v and scalar c.Therefore, the statement A is true.Since, x is orthogonal to every vector in a subspace W, then x is in W-.Therefore, the statement B is true.The statement C is true because of the Pythagorean theorem.
If ||u||² + ||v||² = ||u + v||², thenu² + v² = (u + v)²u² + v² = u² + 2uv + v²u² + v² - u² - 2uv - v² = 0-u.v = 0Therefore, u and v are orthogonal.Therefore, the statement C is true.The statement D is not necessarily true. Vectors in the null space of A need not be orthogonal to vectors in the row space of A.Therefore, the statement D is false.The statement E is not necessarily true. Vectors u and v need not be orthogonal to each other.Therefore, the statement E is false.
To know more about orthogonal visit:
https://brainly.com/question/28503609
#SPJ11
Given: sin(θ) = -√3 / 2 and ,tan(θ) < 0. Which of the following can be the angle θ?
a) 2π/3
b) 11π/6
c) 5π/3
d) 7π/6
e) 5π/6
f) None of the above
The correct option is (f) None of the above. There can be cases where one of the given options is the correct answer. Therefore, we should always check all the options to be sure that none of them satisfies the given conditions.
Given: sin(θ) = -√3 / 2 and, tan(θ) < 0We are to find out which of the following angles can be θ.
Therefore, we will determine the possible values of the angles that satisfy the given conditions. Explanation: The given conditions are: sin(θ)
= -√3 / 2 and, tan(θ) < 0.So, let's put these conditions in terms of angles. The value of sin(θ) is negative in the second quadrant, while it is positive in the fourth quadrant.
So, the possible values of θ are:θ = 2π/3 (second quadrant)θ
= 5π/3 (fourth quadrant)We know that tan(θ) = sin(θ)/cos(θ).
So, let's calculate the value of tan(θ) in each of the above cases:
For θ = 2π/3tan(θ) = sin(θ) / cos(θ) = -√3/2 ÷ (-1/2) = √3 > 0, which contradicts the given condition that tan(θ) < 0.So, θ = 2π/3 cannot be the answer.
For θ = 5π/3tan(θ) = sin(θ) / cos(θ) = -√3/2 ÷ (-1/2) = √3 > 0, which again contradicts the given condition that tan(θ) < 0.So, θ = 5π/3 cannot be the answer. Therefore, none of the above angles can be θ. So, the answer is (f) None of the above.
To know more about conditions visit :-
https://brainly.com/question/24172149
#SPJ11
i.i.d. Let Et N(0, 1). Determine whether the following stochastic processes are stationary. If so, give the mean and autocovariance functions.
Y₁ = cos(pt)et + sin(pt)ɛt-2, ¥€ [0, 2π) E
The given stochastic process is stationary with mean μ = 0 and autocovariance function[tex]γ(h) = δ(h) cos(p(t+h)-pt)[/tex].
Given the stochastic process:
[tex]Y₁ = cos(pt)et + sin(pt)εt-2[/tex]
Where,
[tex]Et ~ N(0, 1)[/tex]
And the interval is [tex]t ∈ [0, 2π)[/tex]
Therefore, the stochastic process can be re-written as:
[tex]Y₁ = cos(pt)et + sin(pt)εt-2[/tex]
Let the mean and variance be denoted by:
[tex]μt = E[Yt]σ²t = Var(Yt)[/tex]
Then, for stationarity of the process, it should satisfy the following conditions:
[tex]μt = μ and σ²t = σ², ∀t[/tex]
Now, calculating the mean μt:
[tex]μt = E[Yt]= E[cos(pt)et + sin(pt)εt-2][/tex]
Using linearity of expectation:
[tex]μt = E[cos(pt)et] + E[sin(pt)εt-2]= cos(pt)E[et] + sin(pt)E[εt-2]= cos(pt) * 0 + sin(pt) * 0= 0[/tex]
Thus, the mean is independent of time t, i.e., stationary and μ = 0.
Now, calculating the autocovariance function:
[tex]Cov(Yt, Yt+h) = E[(Yt - μ) (Yt+h - μ)][/tex]
Substituting the expression of [tex]Yt and Yt+h:Cov(Yt, Yt+h) = E[(cos(pt)et + sin(pt)εt-2) (cos(p(t+h))e(t+h) + sin(p(t+h))ε(t+h)-2)][/tex]
Expanding the product:
Cov(Yt, Yt+h) = E[cos(pt)cos(p(t+h))etet+h + cos(pt)sin(p(t+h))etε(t+h)-2 + sin(pt)cos(p(t+h))εt-2et+h + sin(pt)sin(p(t+h))εt-2ε(t+h)-2]
Using linearity of expectation, and independence of et and εt-2:
[tex]Cov(Yt, Yt+h) = cos(pt)cos(p(t+h))E[etet+h] + sin(pt)sin(p(t+h))E[εt-2ε(t+h)-2]= cos(pt)cos(p(t+h))Cov(et, et+h) + sin(pt)sin(p(t+h))Cov(εt-2, εt+h-2)[/tex]
Now, as et and εt-2 are i.i.d with mean 0 and variance 1:
[tex]Cov(et, et+h) = Cov(εt-2, εt+h-2) = E[etet+h] = E[εt-2ε(t+h)-2] = δ(h)[/tex]
Where δ(h) is Kronecker delta, which is 1 for h = 0 and 0 for h ≠ 0. Thus,
[tex]Cov(Yt, Yt+h) = δ(h) cos(p(t+h)-pt)[/tex]
Hence, the given stochastic process is stationary with mean μ = 0 and autocovariance function [tex]γ(h) = δ(h) cos(p(t+h)-pt).[/tex]
To learn more about stochastic, refer below:
https://brainly.com/question/30712003
#SPJ11
a. high nikitov swings a stone in a 5-meter long sling at a rate of 2 revolutions per second. find the angular and linear velocities of the stone.
The angular velocity of the stone is 12.56 rad/s and the linear velocity of the stone is 31.4 m/s.
Given,The length of the sling = 5m.
Number of revolutions per second = 2 rev/s
The angular velocity formula is given as:
Angular velocity,
w = 2πf
where
f = frequency of rotation,
π = 3.14
The frequency of rotation is given as 2 rev/s.
So, the angular velocity is calculated as:
w = 2πf= 2 × 3.14 × 2= 12.56 rad/s.
The formula for linear velocity is given as:
Linear velocity,
v = rw,
Where
r = radius and w = angular velocity.
The radius of the sling,
r = 5/2= 2.5 m.
Substitute the values in the formula,We get,
v = rw= 2.5 × 12.56= 31.4 m/s.
Therefore, the angular velocity of the stone is 12.56 rad/s and the linear velocity of the stone is 31.4 m/s.
To know more about angular velocity visit:
https://brainly.com/question/32217742
#SPJ11
Suppose that X, Y, and Z are jointly distributed random variables, that is, they are defined on the same sample space. Suppose that we also have the following. E(X)=0 Var (X)= 11 E(Y)=-6 E(Z) = -5 Var(Y)= 14 Var(Z)=13 Compute the values of the expressions below. E (3-2)= 0 பப் Х ? ? * (******)- 0 E -5Y+ 3 0 Var (Z)+2= 0 E(522)= 0
Computed values: E(3-2)=1, E(X)=0, Var(X)=11, E(-5Y + 3)=33, Var(Z) + 2=15, E(522)=522.
What are the computed values of E(3-2), E(X), Var(X), E(-5Y + 3), Var(Z) + 2, and E(522) based on the given information about the random variables?Let's break down the expressions and compute their values:
E(3-2):
The expectation (E) of a constant is simply the constant itself. Therefore, E(3-2) = 3 - 2 = 1.
E(X):
The expectation of X is given as E(X) = 0.
Var(X):
The variance (Var) of X is given as Var(X) = 11.
E(-5Y + 3):
Using linearity of expectation, we can separate the expectation of each term:
E(-5Y + 3) = E(-5Y) + E(3).
Since Y is a random variable and -5 is a constant, we can bring the constant outside the expectation:
E(-5Y + 3) = -5E(Y) + 3.
Substituting the given value, E(Y) = -6:
E(-5Y + 3) = -5(-6) + 3 = 30 + 3 = 33.
Var(Z) + 2:
The variance of Z is given as Var(Z) = 13.
Adding 2 to the variance gives Var(Z) + 2 = 13 + 2 = 15.
E(522):
Since 522 is a constant, its expectation is equal to the constant itself.
Therefore, E(522) = 522.
To summarize the computed values:
E(3-2) = 1
E(X) = 0
Var(X) = 11
E(-5Y + 3) = 33
Var(Z) + 2 = 15
E(522) = 522
If you have any further questions or need additional explanations, feel free to ask!
Learn more about Computed values
brainly.com/question/30229303
#SPJ11
Let X be a normal random variable with mean 0 and variance 1. That is, X~ N(0, 1). Given that P(|X| < 2) ≈ 0.9545, what is the probability that X > 2? Enter answer here
The probability that X > 2 is approximately 0.9772.
The probability that X > 2, we can use the property of symmetry of the normal distribution. Since the mean of the normal random variable X is 0, the distribution is symmetric around the mean.
We know that P(|X| < 2) ≈ 0.9545, which means the probability that X falls within the range (-2, 2) is approximately 0.9545. Since the distribution is symmetric, we can conclude that P(X < -2) is the same as P(X > 2).
P(X > 2), we can subtract P(|X| < 2) from 1:
P(X > 2) = 1 - P(|X| < 2)
The property of symmetry:
P(X > 2) = 1 - P(X < -2)
P(X < -2) using the fact that the distribution is standard normal with mean 0 and variance 1.
We can look up the cumulative probability for -2 in the standard normal distribution table or use statistical software to find this value. Let's assume P(X < -2) = 0.0228 (this value can be found from the standard normal distribution table).
P(X > 2) = 1 - P(X < -2)
P(X > 2) = 1 - 0.0228
P(X > 2) ≈ 0.9772
Therefore, the probability that X > 2 is approximately 0.9772.
To know more about probability refer here:
https://brainly.com/question/31828911#
#SPJ11