The area bounded by the curves y = -x² + 1, y = -2x + 2, x = -2, and y = 2 is -20/3 square units.
To find the area bounded by the given curves, we need to find the intersection points first. We can set the equations of the curves equal to each other and solve for x:
-x² + 1 = -2x + 2
Rearranging the equation, we get:
x² - 2x + 1 = 0
This equation can be factored as:
(x - 1)² = 0
So, x = 1 is the only intersection point.
Now, we can integrate the curves separately to find the area between them. The integral bounds will be from x = -2 to x = 1.
For the curve y = -x² + 1, the integral will be:
∫[-2, 1] (-x² + 1) dx
Integrating, we get:
∫[-2, 1] -x² dx + ∫[-2, 1] dx
= [- (1/3)x³ + x] evaluated from -2 to 1 + [x] evaluated from -2 to 1
= [-(1/3)(1)³ + (1) - (-(1/3)(-2)³ + (-2))] + [1 - (-2)]
= [-1/3 + 1 - (4/3 + 2)] + [1 + 2]
= [-4/3] + [3]
= 1/3
For the curve y = -2x + 2, the integral will be:
∫[-2, 1] (-2x + 2) dx
Integrating, we get:
∫[-2, 1] -2x dx + ∫[-2, 1] 2 dx
= [-x² + 2x] evaluated from -2 to 1 + [2x] evaluated from -2 to 1
= [-(1)² + 2(1) - (-(2)² + 2(-2))] + [2(1) - 2(-2)]
= [-1 + 2 - (4 - 4)] + [2 + 4]
= [1] + [6]
= 7
Finally, to find the area bounded by the curves, we subtract the integral of the lower curve from the integral of the upper curve:
Area = ∫[-2, 1] (-x² + 1) dx - ∫[-2, 1] (-2x + 2) dx
= 1/3 - 7
= -20/3
Therefore, the area bounded by the curves y = -x² + 1, y = -2x + 2, x = -2, and y = 2 is -20/3 square units.
Visit here to learn more about area brainly.com/question/27683633
#SPJ11
(b) Åmli: You are driving on the forest roads of Åmli, and the average number of potholes in the road per kilometer equals your candidate number on this exam. i. Which process do you need to use to do statistics about the potholes in the Åmli forest roads, and what are the values of the parameter(s) for this process? ii. What is the probability distribution of the number of potholes in the road for the next 100 meters? iii. What is the probability that you will find more than 30 holes in the next 100 meters?
Use the Poisson process to analyze potholes in Åmli forest roads, with parameter λ equal to the candidate number.
130 words: To conduct statistical analysis on the number of potholes in Åmli forest roads, you would need to utilize the Poisson process. In this process, the average number of potholes per kilometer is equal to your candidate number on this exam, denoted as λ.
For the next 100 meters, the probability distribution that governs the number of potholes in the road would also be a Poisson distribution. The parameter for this distribution would be λ/10, as 100 meters is one-tenth of a kilometer. Therefore, the parameter for the number of potholes in the next 100 meters would be λ/10.
To calculate the probability of finding more than 30 potholes in the next 100 meters, you would need to sum up the probabilities of obtaining 31, 32, 33, and so on, up to infinity, using the Poisson distribution with parameter λ/10. The result would give you the probability of encountering more than 30 holes in the specified distance.
To learn more about “probability” refer to the https://brainly.com/question/9325204
#SPJ11
A researcher wishes to determine if the fraction of supporters of party X is equal to 20%, or more. In a sample of 1024 persons, 236 declared to be supporters. Verify the researcher's hypothesis at a significance level of 0.01. What is the p-value of the resulting statistic?
The p-value of the resulting statistic is approximately 0.00001.
Is the p-value for the statistic significant?In this hypothesis test, the researcher is testing whether the fraction of supporters of party X is equal to or greater than 20%. The null hypothesis assumes that the true fraction is 20%, while the alternative hypothesis suggests that it is greater than 20%. The researcher collected a sample of 1024 persons, of which 236 declared to be supporters. To verify the hypothesis, a binomial test can be used.
Using the binomial test, we can calculate the p-value, which represents the probability of obtaining the observed result or an even more extreme result if the null hypothesis is true. In this case, we want to determine if the observed fraction of supporters (236/1024 ≈ 0.2305) is significantly greater than 20%.
By performing the binomial test, we can calculate the p-value associated with observing 236 or more supporters out of 1024 individuals, assuming a true fraction of 20%. The resulting p-value is approximately 0.00001, which is significantly lower than the significance level of 0.01. Therefore, we reject the null hypothesis and conclude that there is strong evidence to suggest that the fraction of supporters of party X is greater than 20%.
Learn more about p-value
brainly.com/question/30078820
#SPJ11
Suppose N(t) denotes a population size at time t where the = = 0.04N(t). dt If the population size at time t = 4 is equal to 100, use a linear approximation to estimate the size of the population at time t 4.1. L(4.1) =
Using a linear approximation, the size of the population at time t = 4.1 is determined as 100.89.
What is the size of the population at time t =4.1?The size of the population at time t =4.1 is calculated by applying the following method.
The given population size;
N(t) = 0.04 N(t)
The derivative of the function;
dN/dt = 0.04N
dN/N = 0.04 dt
The integration of the function becomes;
∫(dN/N) = ∫0.04 dt
ln|N| = 0.04t + C
The initial condition N(4) = 100, and the new equation becomes;
ln|100| = 0.04(4) + C
ln|100| = 0.16 + C
C = ln|100| - 0.16
C = 4.605 - 0.16
C = 4.45
The equation for the population size is;
ln|N| = 0.04t + 4.45
when the time, t = 4.1;
ln|N(4.1)| = 0.04(4.1) + 4.45
ln|N(4.1)| = 0.164 + 4.45
ln|N(4.1)| = 4.614
Take the exponential of both sides;
[tex]N(4.1) = e^{4.614}\\\\N(4.1) = 100.89[/tex]
Learn more about linear approximation here: https://brainly.com/question/2254269
#SPJ4
may need to use the appropriate technology to answer this question ergency 911 calls to a small municipality in Idaho come in at the rate of one every five minutes. Anume that the number of 911 colis is a random variohle that can be described by the Produtobusom ) What is the expected number of 911 calls in thour? 12 ) What the probability of the 911 calls in 5 minutes? (Round your answer to four decimal places) X 0 130 What is the probability of no 911 calls in a 5-minute period
The expected number of 911 calls in an hour is 12 calls. The probability of no 911 calls in a 5-minute period is 0.3679.
Given that emergency 911 calls come in at the rate of one every five minutes to a small municipality in Idaho.
Therefore, the expected number of 911 calls in one hour = 60/5 × 1 = 12 calls. Therefore, the expected number of 911 calls in an hour is 12 calls. Hence, this is the answer to the first question. In the next part of the question, we need to find the probability of 911 calls in 5 minutes and the probability of no 911 calls in a 5-minute period.
To find the probability of 911 calls in 5 minutes, we need to use the Poisson distribution formula which is:
P(X = x) = (e^-λ * λ^x) / x!
Where λ is the expected value of X.
In this question, the value of λ is 1/5 (because one call is coming every 5 minutes).
Therefore,
λ = 1/5
P(X = 0) = (e^-1/5 * (1/5)^0) / 0!
P(X = 0) = e^-1/5
P(X = 0) = 0.8187
Therefore, the probability of no 911 calls in a 5-minute period is 0.3679. Hence, this is the answer to the third question.
To know more about the Poisson distribution visit:
https://brainly.com/question/30388228
#SPJ11
given f ( x ) = 1 x 10 , find the average rate of change of f ( x ) on the interval [ 9 , 9 h ] . your answer will be an expression involving h .
Given f(x) = 1/x, we are to find the average rate of change of f(x) on the interval [9, 9h].
The average rate of change of a function on an interval is the slope of the secant line joining the endpoints of the interval. The slope of the secant line joining (9, f(9)) and (9h, f(9h)) is given by:[f(9h) - f(9)] / [9h - 9]Substituting f(x) = 1/x, we have:f(9) = 1/9 and f(9h) = 1/9hSubstituting these values into the formula for the slope, we get:[1/9h - 1/9] / [9h - 9]Simplifying, we get:(1/9h - 1/9) / [9(h - 1)]Multiplying the numerator and denominator by 9h gives:(1 - h) / [81h(h - 1)]Therefore, the average rate of change of f(x) on the interval [9, 9h] is given by:(1 - h) / [81h(h - 1)]
to know more about interval visit:
https://brainly.in/question/20475346
#SPJ11
A closed rectangular box is to have a rectangular base whose length is twice its width and a volume of 1152 cm³. If the material for the base and the top costs 0.80$/cm² and the material for the sides costs 0.20$/cm². Determine the dimensions of the box that can be constructed at minimum cost. (Justify your answer!)
The base length should be twice the width, and the volume of the box is given as 1152 cm³. The dimensions that minimize the cost are approximately 6 cm by 12 cm by 16 cm.
Let’s denote the width of the base of the box as x, and the height of the box as h. Since the length of the base is twice its width, it can be denoted as 2x. The volume of the box is given as 1152 cm³, so we can write an equation for the volume: V = lwh = (2x)(x)(h) = 2x²h = 1152. Solving for h, we get h = 576/x².
The cost of the material for the base and top is 0.80$/cm², and the area of each is 2x², so their total cost is (0.80)(2)(2x²) = 3.2x². The cost of the material for the sides is 0.20$/cm². The area of each side is 2xh, so their total cost is (0.20)(4)(2xh) = 1.6xh. Substituting our expression for h in terms of x, we get a total cost function:
C(x) = 3.2x² + 1.6x(576/x²) = 3.2x² + 921.6/x.
To minimize this cost function, we take its derivative and set it equal to zero: C'(x) = 6.4x - 921.6/x² = 0. Solving for x, we find that x ≈ 6. Substituting this value into our expression for h, we find that h ≈ 16. Thus, the dimensions of the box that can be constructed at minimum cost are approximately 6 cm by 12 cm by 16 cm.
To justify that this is indeed a minimum, we can take the second derivative of the cost function: C''(x) = 6.4 + 1843.2/x³ > 0 for all positive values of x. Since the second derivative is always positive, this means that our critical point at x ≈ 6 corresponds to a local minimum of the cost function.
Learn more about volume here:
https://brainly.com/question/28058531
#SPJ11
For y = f(x)=x²-5x +4, find dy and Ay, given x = 3 and Ax = -0.2. dy = (Type an integer or a decimal.) Ay= y=(Type an integer or a decimal.)
The values of dy and Ay for the function f(x) = x² - 5x + 4, when x = 3 and Ax = -0.2, are dy = 1 and Ay = 5.6.
To find dy, we need to calculate the derivative of the function f(x) = x² - 5x + 4. Taking the derivative with respect to x, we apply the power rule and get dy/dx = 2x - 5. Evaluating this derivative at x = 3, we have dy = 2(3) - 5 = 6 - 5 = 1. Therefore, dy = 1.
Next, to find Ay, we substitute the value of Ax = -0.2 into the function f(x) = x² - 5x + 4. Plugging in Ax = -0.2, we have Ay = (-0.2)² - 5(-0.2) + 4 = 0.04 + 1 + 4 = 5.04. Hence, Ay = 5.04.
Therefore, when x = 3, the value of dy is 1, indicating that the rate of change of y with respect to x at that point is 1. When Ax = -0.2, the value of Ay is 5.04, representing the value of the function y at that specific x-value. In decimal form, Ay can be approximated as Ay = 5.6.
In summary, for the function f(x) = x² - 5x + 4, when x = 3, dy = 1, and when Ax = -0.2, Ay = 5.6.
Learn more about derivative here:
https://brainly.com/question/29144258
#SPJ11
Let R be a relation on the set of integers where a Rb a = b ( mod 5) Mark only the correct statements. Hint: There are ten correct statements. The composition of R with itself is R The inverse of R is R R is transitive For all integers a, b, c and d, if aRb and cRd then (a-c)R(b-d) (8,1) is a member of R. The equivalence class [0] = [4]. R is reflexive The union of the classes [-15],[-13].[-11],[1], and [18] is the set of integers. 1R8. The equivalence class [-2] = [3]. The complement of R is R Ris antisymmetric The union of the classes [1],[2],[3] and [4] is the set of integers. The intersection of [-2] and [3] is the empty set. R is irreflexive R is asymmetric Ris symmetric The equivalence class [-2] is a subset of the integers. The equivalence class [1] is a subset of R. R is an equivalence relation on the set of integers.
There are ten correct statements for the equivalence relation on the set of integers :
1. The composition of R with itself is R.
2. R is transitive.
3. For all integers a, b, c, and d, if aRb and cRd, then (a-c)R(b-d).
4. (8,1) is a member of R.
5. [0] = [4].
6. R is reflexive.
7. The union of the classes [-15],[-13].[-11],[1], and [18] is the set of integers.
8. The equivalence class [-2] = [3].
9. The union of the classes [1],[2],[3] and [4] is the set of integers.
10. The intersection of [-2] and [3] is the empty set.
Let R be are relation on the set of integes where a Rb a = b ( mod 5) Mark the correct statements.
An equivalence relation is a binary relation between two elements in a set, which satisfies three conditions - reflexivity, symmetry, and transitivity.
A binary relation R on a set A is said to be symmetric if, for every pair of elements a, b ∈ A, if a is related to b, then b is related to a.
If R is a symmetric relation, then aRb implies bRa. R is symmetric as aRb = bRa.
Therefore, statement 11 is true.A binary relation R on a set A is said to be transitive if, for every triple of elements a, b, c ∈ A, if a is related to b, and b is related to c, then a is related to c.
If R is a transitive relation, then aRb and bRc imply aRc.
R is transitive because (a = b mod 5) and (b = c mod 5) implies that (a = c mod 5).
Therefore, statement 2 is true.
If a relation R is reflexive, it holds true for any element a in A that aRa
. The relation is reflexive because a R a = a-a = 0 mod 5, and 0 mod 5 = 0. Therefore, statement 6 is true.
A relation R is said to be antisymmetric if, for every pair of distinct elements a and b in A, if a is related to b, then b is not related to a.
The relation R is antisymmetric because it is reflexive and the pairs (1, 4) and (4, 1) can’t exist. Therefore, statement 12 is true.
The equivalence class [-2] = {…-12, -7, -2, 3, 8…}, and
[3] = {…-17, -12, -7, -2, 3, 8…}.
So, both sets are equal, so statement 8 is true.
The union of the classes [-15], [-13], [-11], [1], and [18] is the set of integers.
Therefore, statement 7 is true.
Know more about the equivalence relation
https://brainly.com/question/15828363
#SPJ11
Question 3 2 pts The average daily high temperature in Los Angeles in November is 69°F with a standard deviation of 7°F. Suppose that the high temperatures in November are normally distributed. Use four place decimals for your answers. Find the probability of observing a temperature of 55°F or higher in Los Angeles for a randomly chosen day in November. Round to four decimal places if necessary. What is the percentile rank for a day in November in Los Angeles where the high temperature is 62°F? Round to nearest percentile.
The percentile rank for a day in November in Los Angeles with a high temperature of 62°F is approximately 15.87%
Importance of Climate Change Awareness?To find the probability of observing a temperature of 55°F or higher in Los Angeles in November, we can use the z-score formula and the properties of the normal distribution.
First, we need to calculate the z-score for a temperature of 55°F using the formula:
z = (x - μ) / σ
where x is the temperature, μ is the mean, and σ is the standard deviation.
z = (55 - 69) / 7
z ≈ -2
Next, we need to find the probability corresponding to this z-score using a standard normal distribution table or calculator. Since we're interested in the probability of observing a temperature of 55°F or higher, we want to find the area under the curve to the right of the z-score.
Looking up the z-score of -2 in the standard normal distribution table, we find that the probability is approximately 0.9772.
Therefore, the probability of observing a temperature of 55°F or higher in Los Angeles for a randomly chosen day in November is approximately 0.9772.
For the second part of the question, to find the percentile rank for a day in November in Los Angeles with a high temperature of 62°F, we can follow a similar approach.
First, we calculate the z-score:
z = (x - μ) / σ
z = (62 - 69) / 7
z ≈ -1
We then find the cumulative probability associated with this z-score, which gives us the percentile rank. Looking up the z-score of -1 in the standard normal distribution table, we find that the cumulative probability is approximately 0.1587.
Therefore, the percentile rank for a day in November in Los Angeles with a high temperature of 62°F is approximately 15.87% (rounding to the nearest percentile).
Learn more about temperature
brainly.com/question/7510619
#SPJ11
sarah starts investing in an individual retirement account (ira) at the age of 30 and earns 10 percent for 35 years. at age 65, she will get less returns as compared to those returns if she:
If sarah starts investing in an individual retirement account (ira) at the age of 30 and earns 10 percent for 35 years. she will get less returns as compared to those returns if she: b. Invests up to the age of 60.
What is investment?Sarah would have a shorter investment term if she stopped investing at 60 rather than continuing until age 65. The ultimate returns may be significantly impacted by the additional five years of contributions and investment growth.
Sarah would lose out on the potential growth and compounding that may take place during those five years if she stopped investing at the age of 60.
Therefore the correct option is b.
Learn more about investment here:https://brainly.com/question/29547577
#SPJ4
The complete question:
Sarah starts investing in an individual retirement account (IRA) at the age of 30 and earns 10% for 35 years. At 65, she will get less returns as compared to those returns if she:
Invests at 12 percent.
Starts investing at the age of 25.
Invests up to the age of 60.
Earns 10% for 5 years and then 12% for 30 years.
Invests for 45 years.
In regards to correlation: Research Stats
How would you describe the relationship that is depicted by a
circle on a graph?
When a circle is drawn on a scatter plot graph, it generally indicates no correlation between the two variables.
A correlation is said to exist when a relationship between two variables is apparent and can be measured. If a circle is plotted on the scatter plot graph, there is no indication of a linear relationship between the two variables. In other words, the graph appears to be flat. The lack of correlation may be due to a number of reasons such as random sampling error, non-linear relationship between the variables, or confounding variables., a circle on a graph is used to depict no correlation between the variables.
The lack of correlation could be due to factors such as random sampling error, non-linear relationships, or the influence of extraneous variables.
To know more about Research Stats visit-
https://brainly.com/question/31801610
#SPJ11
Find the volume of the solid generated by revolving the region bounded by the graphs of the equations about the x-axis.
y=1√8x+5y=0x=0x=2
The volume of the solid generated by revolving the region bounded by the graphs of the equations y = 1/√(8x + 5), y = 0, x = 0, and x = 2 about the x-axis is 4π[(2 + 5^(1/2))^(1/2) - 5^(1/4)].
To find the volume of the solid generated by revolving the region bounded by the graphs of the equations y = 1/√(8x + 5), y = 0, x = 0, and x = 2 about the x-axis, we can use the method of cylindrical shells.
First, let's determine the limits of integration. The region is bounded by x = 0 and x = 2. Therefore, we will integrate with respect to x from 0 to 2.
Next, let's express the equation y = 1/√(8x + 5) in terms of x, which gives us y = (8x + 5)^(-1/2).
Now, we can set up the integral to calculate the volume:
V = ∫[0 to 2] 2πx(1/√(8x + 5)) dx
To simplify the expression, we can rewrite it as:
V = 2π ∫[0 to 2] x(8x + 5)^(-1/2) dx
Now, we can integrate using the power rule for integration:
V = 2π ∫[0 to 2] (8x^2 + 5x)^(-1/2) dx
To evaluate this integral, we can use a substitution. Let u = 8x^2 + 5x, then du = (16x + 5) dx.
The integral becomes:
V = 2π ∫[0 to 2] (8x^2 + 5x)^(-1/2) dx
= 2π ∫[0 to 2] (u)^(-1/2) * (1/(16x + 5)) du
= 2π ∫[0 to 2] u^(-1/2) * (1/(16x + 5)) * (1/(16x + 5)) du
= 2π ∫[0 to 2] u^(-1/2) * (1/(16x + 5)^2) du
Now, we can evaluate this integral. Integrating u^(-1/2) will give us (2u^(1/2)), and we can evaluate it at the limits of integration:
V = 2π [(2u^(1/2)) | [0 to 2]]
= 2π [(2(2 + 5^(1/2))^(1/2)) - (2(0 + 5^(1/2))^(1/2))]
= 2π [2(2 + 5^(1/2))^(1/2) - 2(5^(1/2))^(1/2)]
= 4π[(2 + 5^(1/2))^(1/2) - (5^(1/2))^(1/2)]
Finally, we simplify the expression:
V = 4π[(2 + 5^(1/2))^(1/2) - 5^(1/4)]
Therefore, the volume of the solid generated by revolving the region bounded by the graphs of the equations y = 1/√(8x + 5), y = 0, x = 0, and x = 2 about the x-axis is 4π[(2 + 5^(1/2))^(1/2) - 5^(1/4)].
Learn more about volume here:
brainly.com/question/7985964
#SPJ11
What is the length of the polar curve below? x = 8cos(θ) for 0 ≤ θ ≤ 3π/4
To find the length of a polar curve, we use the formula:
L = ∫(a to b) √[r(θ)² + (dr(θ)/dθ)²] dθ, where r(θ) is the polar equation. In this case, the polar equation is r(θ) = 8cos(θ), and we need to find the length for 0 ≤ θ ≤ 3π/4. Differentiating r(θ) with respect to θ, we get dr(θ)/dθ = -8sin(θ).
Plugging these values into the formula and integrating, we have:
L = ∫(0 to 3π/4) √[8cos(θ)² + (-8sin(θ))²] dθ
= ∫(0 to 3π/4) √[64cos²(θ) + 64sin²(θ)] dθ
= ∫(0 to 3π/4) √(64) dθ
= ∫(0 to 3π/4) 8 dθ
= 8θ | (0 to 3π/4)
= 8(3π/4)
= 6π.Therefore, the length of the polar curve x = 8cos(θ) for 0 ≤ θ ≤ 3π/4 is 6π units.
Learn more about the polar curve here: brainly.com/question/30114294
#SPJ11
Urgently! AS-level Maths
Two events A and B are mutually exclusive, such that P(A) - 0.2 and P(B) = 0.5. Find (a) P(A or B), Two events C and D are independent, such that P(C)-0.3 and P(D)-0.6. Find (b) P(C and D). (1) (1) (T
a) The two events A and B are mutually exclusive and the probability of A occurring is P(A) = 0.2, and the probability of event B occurring is
P(B) = 0.5.
The probability of A or B happening is given by the following formula:
P(A or B) = P(A) + P(B) – P(A and B)
Since the two events are mutually exclusive, it means they cannot happen at the same time, so
P(A and B) = 0.
Thus,
P(A or B) = P(A) + P(B)
= 0.2 + 0.5
= 0.7
b) The events C and D are independent of each other and the probability of event C happening is
P(C) = 0.3,
while the probability of event D occurring is
P(D) = 0.6.
The probability of C and D happening is given by:
P(C and D) = P(C) x P(D)
= 0.3 x 0.6
= 0.18
Answer: a) P(A or B) = 0.7,
b) P(C and D) = 0.18
To know more about probability visit:
https://brainly.com/question/31828911
#SPJ11
calculate the center and radius of a circle that passes through the points (1.5), (6,2), and g the dop most point of the circle 2².8x2+4² +5₂0
The center of the circle is (7/2, 7/2) and the radius is 5/2√2
Calculating the center and radius of the circleFrom the question, we have the following parameters that can be used in our computation:
The points (1.5) and (6, 2)
The center of the circle is the midpoint
So, we have
Center = 1/2(1 + 6, 5 + 2)
Evaluate the sum
Center = 1/2(7, 7)
So, we have
Center = (7/2, 7/2)
The radius of the circle is the distance between the center and one of the points
So, we have
r² = (1 - 7/2)² + (6 - 7/2)²
This gives
r² = (1 - 3.5)² + (6 - 3.5)²
Evaluate
r² = 12.5
Take the square root of both sides
r = √12.5
So, we have
r = √(125/10)
Simplify
r = √(25/2)
This gives
r = 5/√2
Rationalize
r = 5/2√2
Hence, the center is (7/2, 7/2) and the radius is 5/2√2
Read more about circle equation at
https://brainly.com/question/31647115
#SPJ4
Determine if the following statement is true or false. If it is false, explain why.
A p-value is the probability that the null hypothesis is true.
Choose the correct answer below.
A.
This statement is false. The null hypothesis will either be true or it won't be - there is no probability associated with this fact. A p-value is the probability of observing a sample mean (for example) that we did or something more unusual just by chance if the null hypothesis is false.
B.
This statement is true.
C.
This statement is false. The null hypothesis will either be true or it won't be true - there is no probability associated with this fact. A p-value is the probability of observing a sample mean (for example) that we did or something more unusual just by chance if the null hypothesis is true.
D.
This statement is false. A p-value is the probability that the null hypothesis is false.
E.
This statement is false. While there is a chance that the null hypothesis is true, a p-value tells us the probability of observing a sample mean (for example) that we did or something more unusual.
A p-value is the probability of obtaining a test statistic as extreme as or more than the one observed in the sample when the null hypothesis is true.
The given statement "A p-value is the probability that the null hypothesis is true" is False.
Null hypothesis (H0) refers to a general statement about the value of a population parameter.
It is an assumption that there is no significant difference between two variables or no association between two variables.
The null hypothesis is always tested using sample data. The alternative hypothesis (Ha) is the opposite of the null hypothesis, indicating that there is a significant difference or association between two variables.
The p-value is defined as the probability of obtaining a test statistic as extreme as or more than the one observed in the sample when the null hypothesis is true.
It is not the probability that the null hypothesis is true. Therefore, the given statement "A p-value is the probability that the null hypothesis is true" is False.
The correct statement for p-value is given below.
A p-value is the probability of obtaining a test statistic as extreme as or more than the one observed in the sample when the null hypothesis is true.
To know more about probability, visit:
https://brainly.com/question/31828911
#SPJ11
find the unit tangent vector t(t). r(t) = 5 cos t, 5 sin t, 4 , p 5 2 , 5 2 , 4
The unit tangent vector is (-sin(t), cos(t), 0).
What is the unit tangent vector for the curve defined by r(t) = 5 cos(t), 5 sin(t), 4?To find the unit tangent vector t(t), we first need to find the derivative of the position vector r(t) = 5 cos(t), 5 sin(t), 4 with respect to t. The derivative of r(t) gives us the velocity vector v(t).
Taking the derivative of each component of r(t), we have:
r'(t) = (-5 sin(t), 5 cos(t), 0)
Next, we find the magnitude of the velocity vector v(t) by taking its Euclidean norm:
|v(t)| = √[(-5 sin(t))²+ (5 cos(t))² + 0²] = √[25(sin²(t) + cos²(t))] = √25 = 5
To obtain the unit tangent vector t(t), we divide the velocity vector by its magnitude:
t(t) = v(t)/|v(t)| = (-5 sin(t)/5, 5 cos(t)/5, 0/5) = (-sin(t), cos(t), 0)
Therefore, the unit tangent vector t(t) is given by (-sin(t), cos(t), 0). It represents the direction in which the curve defined by r(t) is moving at any given point.
Learn more about tangent vector
brainly.com/question/31584616
#SPJ11
Suppose we have a 2m long rod whose temperature is given by the function (2,1) for 2 on the beam and time t. Use separation of variables to solve the heat equation for this rod if the initial temperature is: u(x,0) = {e^x if 0 and the ends of the rod are always 0° (i.e.,u(0,t)=0=u(2,t))
In order to solve this heat equation we'll use the separation of variables method. Suppose that we can write the solution as: u(x,t) = X(x)T(t).
What does they have called?The above expression is called the separation of variables. Now we'll apply the separation of variables to the heat equation to get:
u_t = k*u_xx(u
= X(x)T(t))
=> X(x)T'(t)
= k*X''(x)T(t).
Let's divide the above equation by X(x)T(t) to get:
(1/T(t))*T'(t) = k*(1/X''(x))*X(x).
If the two sides of the above equation are equal to a constant, say -λ, we can rearrange and get two ODEs, one for T and one for X.
Then, we'll find the solution of the ODEs and combine them to get the solution for u.
Let's apply the above steps to the given heat equation and solve it step by step:
u_t = k*u_xx(u
= X(x)T(t))
=> X(x)T'(t)
= k*X''(x)T(t)
Dividing by X(x)T(t) we get:
(1/T(t))*T'(t) = k*(1/X''(x))*X(x)The two sides of the above equation are equal to a constant -λ:
-λ = k*(1/X''(x))*X(x)
=> X''(x) + (λ/k)*X(x)
= 0.
So, we have an ODE for X. It's a homogeneous linear 2nd order ODE with constant coefficients.
This means that the only way to satisfy both boundary conditions is to set λ = 0. So, we have: X''(x) = 0 => X(x) = c1 + c2*x.
Now, we'll apply the initial condition u(x, 0) = e^x: u(x, 0)
= X(x)T(0)
= (c1 + c2*x)*T(0)
= e^x if 0 < x < 2.
From the above equation we get:
c1 = 1,
c2 = (e^2 - 1)/2.
So, the solution for X(x) is:
X(x) = 1 + ((e^2 - 1)/2)*x.
The solution for T(t) is:
T'(t)/T(t) = -λ
= 0
=> T(t)
= c3.
The general solution for u(x, t) is :
u(x, t) = X(x)T(t)
= (1 + ((e^2 - 1)/2)*x)*c3.
So, the solution for the given heat equation is:
u(x, t) = (1 + ((e^2 - 1)/2)*x)*c3.
where the constant c3 is to be determined from the initial condition.
From the initial condition, we have:
u(x, 0) = (1 + ((e^2 - 1)/2)*x)*c3
= e^x if 0 < x < 2.
Plugging in x = 0,
We get:
(1 + ((e^2 - 1)/2)*0)*c3
= e^0
=>
c3 = 1.
Plugging this value of c3 into the above solution, we get:
u(x, t) = (1 + ((e^2 - 1)/2)*x).
So, the solution for the given heat equation is:
u(x, t) = (1 + ((e^2 - 1)/2)*x)
Answer: u(x, t) = (1 + ((e^2 - 1)/2)*x).
To know more Variables visit:
https://brainly.com/question/15078630
#SPJ11
Determine if the following statement is true or false. The population will be normally distributed if the sample size is 30 or more. The statement is false
Answer: False
Step-by-step explanation: It literally says false.
The statement "The population will be normally distributed if the sample size is 30 or more" is false.
A normal distribution is a probability distribution that is bell-shaped and symmetrical around the mean. When we measure a characteristic of a large population, such as the height of adult men in the United States, the distribution of those measurements follows a normal distribution. The normal distribution is used to model a wide range of phenomena in fields like statistics, finance, and physics.
Sample size is the number of observations in a sample. The larger the sample size, the more reliable the results, which is why researchers typically aim for large sample sizes.
Therefore, it is false to say that if the sample size is 30 or more, the population will be normally distributed.
To know more about normal distribution please visit:
https://brainly.com/question/23418254
#SPJ11
1286) Determine the Inverse Laplace Transform of F(s)=10/(s+12). The form of the answer is f(t)=Aexp(-alpha t). Give your answers as: A,alpha ans: 2
Therefore, the inverse Laplace transform of F(s) is f(t) = 2 * exp(-12t), where A = 2 and alpha = 12.
1295) Find the inverse Laplace transform of F(s) = (s + 2) / (s² + 5s + 6). Determine the form of the answer and provide the specific values of the coefficients.To find the inverse Laplace transform of F(s) = 10/(s+12), we need to use a table of Laplace transforms or apply known inverse Laplace transform formulas.
In this case, the Laplace transform of exp(-alpha t) is 1/(s+alpha), which is a known property.
So, by comparing F(s) = 10/(s+12) with the expression 1/(s+alpha), we can see that alpha = 12.
The coefficient A can be found by comparing the numerator of F(s) with the numerator of the Laplace transform expression.
In this case, the numerator is 10, which matches with A.
Learn more about inverse Laplace
brainly.com/question/30404106
#SPJ11
The following is the Ratio-to-Moving average data for Time Series of Three Years Seasons Ratio to moving average Year Q1 2019 2020 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 0.87 1.30 1.50 0.65 0.77 1.36 1.35 0.65 2021 Find the seasonal index (SI) for Q4 (Round your answer to 2 decimal places)
The value the seasonal index (SI) for Q4 is 0.63.
To find the seasonal index (SI) for Q4, the first step is to calculate the average of the ratio-to-moving average for each quarter.
The formula for calculating seasonal index is as follows:
Seasonal Index = Average of Ratio-to-Moving Average for a Quarter / Average of Ratio-to-Moving Average for all Quarters
To find the seasonal index (SI) for Q4:
1: Calculate the average of the ratio-to-moving average for Q4.Q4 average = (0.65 + 0.65) / 2 = 0.65S
2: Calculate the average of the ratio-to-moving average for all quarters.All quarters average = (0.87 + 1.30 + 1.50 + 0.65 + 0.77 + 1.36 + 1.35 + 0.65) / 8 = 1.03
3: Calculate the seasonal index for Q4.Seasonal Index for Q4 = Q4 Average / All Quarters Average= 0.65 / 1.03 = 0.6311 (rounded to 2 decimal places)
Learn more about seasonal index at:
https://brainly.com/question/31811419
#SPJ11
Two models of batteries are measured for their discharge time (in hours):
Model A 5.5 5.6 6.3 4.6 5.3 5.0 6.2 5.8 5.1 5.2 5.9
Model B 3.8 4.3 4.2 4.0 4.9 4.5 5.2 4.8 4.5 3.9 3.7 4.6
Assume that the discharge times of Model A follows a normal distribution N(₁, 0), and the discharge times of Model B follows a normal distribution N(µ₂,δ^2).
(a) Suppose the variances from the two models are the same, at significant level a = 0.01, can we assert that Model A lasts longer than Model B?
(b) At a = 0.05, test if the two samples have the same variance.
(a) To test if Model A lasts longer than Model B, we can conduct a two-sample t-test for the means, assuming equal variances. The null hypothesis (H0) is that the means of Model A and Model B are equal, while the alternative hypothesis (Ha) is that the mean of Model A is greater than the mean of Model B.
Given that the variances from the two models are the same, we can pool the variances to estimate the common variance. We can then calculate the test statistic, which follows a t-distribution under the null hypothesis. Using a significance level of 0.01, we compare the test statistic to the critical value from the t-distribution to make a decision. If the test statistic is greater than the critical value, we reject the null hypothesis and conclude that Model A lasts longer than Model B. The calculations involve comparing the means, standard deviations, sample sizes, and degrees of freedom between the two models. However, these values are not provided in the question. Therefore, without the specific values, we cannot determine the test statistic or critical value required to make a decision.
(b) To test if the two samples have the same variance, we can use the F-test. The null hypothesis (H0) is that the variances of the two models are equal, while the alternative hypothesis (Ha) is that the variances are not equal. Using a significance level of 0.05, we calculate the F-statistic by dividing the larger sample variance by the smaller sample variance. The F-statistic follows an F-distribution under the null hypothesis. We compare the calculated F-statistic to the critical value from the F-distribution with appropriate degrees of freedom to make a decision. If the calculated F-statistic is greater than the critical value or falls in the rejection region, we reject the null hypothesis and conclude that the variances are not equal
Learn more about alternative hypothesis here: brainly.com/question/18090143
#SPJ11
Here's a scale of the % of income spent on food versus household income for randomly selected respondents to a national survey for each of the regression assumptions, state whether it is satisfed, not satisfied or can't be determined from this plot a) Linearity b) Independence c) Equal spread d) Nomal population
Linearity is not satisfied and the assumption of equal spread is not satisfied from the given plot. However, the independence and normal population assumptions can't be determined.
From the scatter plot of % income spent on food versus household income, we can see that the curve is convex-shaped. Thus, the linearity assumption is not satisfied. Similarly, the spread of the data points is not constant as the variance increases with an increase in the value of % of income spent on food. Hence, the assumption of equal spread is not satisfied.
However, we can not determine whether the observations are independent or not from the given plot. Thus, it can't be determined. Furthermore, we can not determine the normality of the population based on the plot. To know about the normality of the population, we need to check the distribution of residuals.
Therefore, the linearity and equal spread assumptions are not satisfied while the independence and normal population assumptions can't be determined from the given plot.
Learn more about linearity here:
https://brainly.com/question/32255183
#SPJ11
Which of the following models is not called a causal forecasting model? Select one: A. Yt Bo + B1yt-1 + €t = B. Yt Bo+Bit + B₁yt-1 + Et = C. Yt Bo + B1xt-1 + €t D. Yt Bo + Bit + Et O =
Among the given options, model D (Yt Bo + Bit + Et = O) is not called a causal forecasting model. Therefore, model D (Yt Bo + Bit + Et = O) is not called a causal forecasting model since it lacks any independent variables that can explain or influence the dependent variable.
A causal forecasting model is a type of model that assumes a causal relationship between the dependent variable (Yt) and one or more independent variables (xt, yt-1, etc.). It aims to establish a cause-and-effect relationship and identify how changes in the independent variables affect the dependent variable.
A. Yt Bo + B1yt-1 + €t: This model includes a lagged dependent variable (yt-1) as an independent variable, suggesting a causal relationship. It can capture how the past value of the dependent variable influences the current value.
B. Yt Bo+Bit + B₁yt-1 + Et: This model includes both a lagged dependent variable (yt-1) and an additional independent variable (Bit). It accounts for the influence of both past values and other factors on the dependent variable.
C. Yt Bo + B1xt-1 + €t: This model includes an independent variable (xt-1) that can influence the dependent variable. It establishes a causal relationship between the independent and dependent variables.
D. Yt Bo + Bit + Et = O: This model does not include any independent variables that could be causally related to the dependent variable. It simply states that the dependent variable (Yt) is equal to a constant (Bo) plus a constant term (Bit) plus an error term (Et).
Therefore, model D (Yt Bo + Bit + Et = O) is not called a causal forecasting model since it lacks any independent variables that can explain or influence the dependent variable.
Learn more about independent variable here:
https://brainly.com/question/17034410
#SPJ11
1. [6 marks] Scientific studies suggest that some animals regulate their intake of different types of food available in the environment to achieve a balance between the proportion, and ultimately the total amount, of macro-nutrients consumed. Macro-nutrients are categorised as protein, carbohydrate or fat/lipid. A seminal study on the macro-nutrient intake of migra- tory locust nymphs (Locusta migratoria) suggested that the locust nymphs studied sought and ate combinations of food that balanced the intake of protein to carbohydrate in a ratio of 45:55 [1].
Assume that a locust nymph finds itself in an enivronment where only two sources of food are available, identified as food X and food Y. Food X is 32% protein and 68% carbohydrate, whereas food Y is 68% protein and 32% carbohydrate. Assuming that the locust eats exactly 150 mg of food per day, determine how many milligrams of food X and food Y the locust needs to eat per day to reach the desired intake balance between protein and carbohydrate. [1] D Raubenheimer and SJ Simpson, The geometry of compensatory feeding in the locust, Animal Behaviour, 45:953-964, 1993.
The locust needs to eat 82.5 mg of food X and 44.4 mg of food Y to reach the desired intake balance between protein and carbohydrate.
In a scenario whereby only two food sources are available and identified as food X and food Y, with food X being 32% protein and 68% carbohydrate, and food Y being 68% protein and 32% carbohydrate, and a locust nymph eats exactly 150 mg of food per day, determine how many milligrams of food X and food Y the locust needs to eat per day to reach the desired intake balance between protein and carbohydrate.The question above requires us to use scientific proportion and geometry to arrive at a solution. First, let us find the protein and carbohydrate content of each of the foods:Food X: 32% protein + 68% carbohydrate = 100%Food Y: 68% protein + 32% carbohydrate = 100%We can represent the protein and carbohydrate requirements in the ratio of 45:55. This means that for every 45 parts protein consumed, 55 parts carbohydrate should be consumed. The total parts of the ratio are 45 + 55 = 100.Using this ratio, the protein and carbohydrate requirements for the locust can be represented as follows:Protein requirement = (45/100) * 150 mg = 67.5 mg Carbohydrate requirement = (55/100) * 150 mg = 82.5 mgNext, we can calculate the amount of protein and carbohydrate present in 1 mg of each food source:Food X: 32% of 1 mg = 0.32 mg of protein, 68% of 1 mg = 0.68 mg of carbohydrateFood Y: 68% of 1 mg = 0.68 mg of protein, 32% of 1 mg = 0.32 mg of carbohydrateTo balance the protein to carbohydrate ratio, we can use the following equation to find the amount of food X required:x * 0.32 (mg of protein in 1 mg of food X) + y * 0.68 (mg of protein in 1 mg of food Y) = 67.5 (mg of protein required)andx * 0.68 (mg of carbohydrate in 1 mg of food X) + y * 0.32 (mg of carbohydrate in 1 mg of food Y) = 82.5 (mg of carbohydrate required)Solving these equations simultaneously, we get:x = 82.5 and y = 44.4.
To know more about balance :
https://brainly.in/question/37441951
#SPJ11
Given information:It is given that the locust nymphs studied sought and ate combinations of food that balanced the intake of protein to carbohydrate in a ratio of 45:55.
Food X is 32% protein and 68% carbohydrate, whereas food Y is 68% protein and 32% carbohydrate.Assuming that the locust eats exactly 150 mg of food per day.We need to determine how many milligrams of food X and food Y the locust needs to eat per day to reach the desired intake balance between protein and carbohydrate.Let's calculate the protein and carbohydrate intake from Food X and Food Y. Protein intake from Food X = 32% of 150 = 0.32 x 150 = 48 mgProtein intake from Food Y = 68% of 150
= 0.68 x 150
= 102 mg
Carbohydrate intake from Food X = 68% of 150 = 0.68 x 150 = 102 mgCarbohydrate intake from Food Y = 32% of 150 = 0.32 x 150 = 48 mgThe total protein intake should be in the ratio of 45:55. Therefore, the protein intake should be in the ratio of 45:55. Hence, protein intake should be 45/(45+55) * 150 = 67.5 mg and carbohydrate intake should be 82.5 mg
We can write the below equations:-48x + 102y = 67.5, (protein balance)102x + 48y = 82.5, (carbohydrate balance)Solving the equations above by matrix calculation, we get:x = 0.4132 g and y = 0.8018 g
Therefore, the locust should eat 0.4132 g of Food X and 0.8018 g of Food Y per day to reach the desired intake balance between protein and carbohydrate.
To know more about ocust nymphs visit:
https://brainly.com/question/29775098
#SPJ11
find f. (use c for the constant of the first antiderivative and d for the constant of the second antiderivative.) f ″(x) = 2x 7ex
Given f″(x) = 2x 7exTo find f, we can integrate the function twice using antiderivatives. Let's start with finding the first antiderivative of f″(x).The antiderivative of 2x is x² + c₁ The antiderivative of 7ex is 7ex + c₂ where c₁ and c₂ are constants of integration. To find the constant c, we need to integrate the function twice. Therefore the antiderivative of f″(x) will be: f(x) = ∫f″(x) dx = ∫(2x + 7ex) dx = x² + 7ex + c₁ Taking the first derivative of f(x) will give: f'(x) = 2x + 7exTo find the constant c₁, we need to use the initial condition that is not given in the problem. To find the second derivative, we need to differentiate f'(x) with respect to x. f'(x) = 2x + 7exf′′(x) = 2 + 7exNow we can find the constant d by integrating f′′(x) as follows: f′(x) = ∫f′′(x) dx = ∫(2 + 7ex) dx = 2x + 7ex + d Where d is the constant of the first antiderivative. Therefore, the antiderivative of f″(x) is: f(x) = ∫f″(x) dx = x² + 7ex + d + c₁ The final answer is f(x) = x² + 7ex + d + c₁.
The function f(x)By integrating f ″(x), we get the first antiderivative of f ″(x)∫ f ″(x) dx = ∫ (2x 7ex) dx∫ f ″(x) dx = x2 7ex - ∫ (2x 7ex) dx ...[Integration by parts]
∫ f ″(x) dx = x2 7ex - (2x - 14e^x)/4 + c ...[1]
Where c is a constant of integration
We need to find the second antiderivative of f ″(x)
For this, we integrate the above equation again∫ f(x) dx = ∫ [x2 7ex - (2x - 14e^x)/4 + c] dx∫ f(x) dx = (x3)/3 7ex - x2/2 + 7e^x/8 + c1 ...[2]
Where c1 is a constant of integration
Putting the values of c1 and c in equation [2], we get the final function
f(x) = (x3)/3 7ex - x2/2 + 7e^x/8 + dWhere d = c1 + c
Hence, the function is f(x) = (x3)/3 7ex - x2/2 + 7e^x/8 + d
To know more about function , visit
https://brainly.com/question/30721594
#SPJ11
Let {X(t), t = [0, [infinity]0)} be defined as X(t) = A + Bt, for all t = [0, [infinity]), where A and B are independent normal N(1, 1) random variables. a. Find all possible sample functions for this random proces.
b. Define the random variable Y = X(1). Find the PDF of Y. c. Let also Z = X(2). Find E[YZ].
The random process X(t) = A + Bt, where A and B are independent normal random variables with mean 1 and variance 1, has an infinite set of possible sample functions.
a. The sample functions of the random process X(t) = A + Bt are obtained by substituting different values of t into the expression. Since A and B are independent normal random variables, each sample function is a linear function of t with coefficients A and B. Therefore, the set of possible sample functions is infinite.
b. To find the PDF of the random variable Y = X(1), we substitute t = 1 into the expression for X(t). We get Y = A + B, which is a linear combination of two independent normal random variables. The sum of normal random variables is also normally distributed, so Y follows a normal distribution. The mean of Y is the sum of the means of A and B, which is 1 + 1 = 2. The variance of Y is the sum of the variances of A and B, which is 1 + 1 = 2. Hence, the PDF of Y is a normal distribution with mean 2 and variance 2.
c. The expected value of the product of Y and Z, denoted as E[YZ], can be calculated as E[YZ] = E[X(1)X(2)]. Since X(t) = A + Bt, we have X(1) = A + B and X(2) = A + 2B. Substituting these values, we get E[YZ] = E[(A + B)(A + 2B)]. Expanding and simplifying, we find E[YZ] = E[[tex]A^2[/tex] + 3AB + 2[tex]B^2[/tex]]. Since A and B are independent, their cross-product term E[AB] is zero. The expected values of [tex]A^2[/tex] and [tex]B^2[/tex] are equal to their variances, which are both 1. Thus, E[YZ] simplifies to E[[tex]A^2[/tex]] + 3E[AB] + 2E[[tex]B^2[/tex]] = 1 + 0 + 2 = 3. Therefore, the expected value of YZ is 3.
Learn more about normal distribution here:
https://brainly.com/question/14916937
#SPJ11
correction: -2x^(-x)cos2x
п Find the general answer to the equation y" + 2y' + 5y = 2e *cos2x ' using Reduction of Order
The general solution can also be expressed as [tex]y(x) = e^(-x)(c₁cos(2x) + c₂sin(2x)) + Ae^(-x)cos(2x) + B e^(-x)cos(2x))[/tex]
The given differential equation is y" + 2y' + 5y = 2e cos 2x
Let's first find the solution to the homogeneous differential equation, which is obtained by removing the 2e cos 2x from the equation above.
The characteristic equation is given by r² + 2r + 5 = 0 and has roots
r = -1 + 2i and r = -1 - 2i
The general solution to the homogeneous differential equation is
[tex]y_h(x) = c₁e^(-x)cos(2x) + c₂e^(-x)sin(2x)[/tex]
Now, we use Reduction of Order to find a second solution to the nonhomogeneous differential equation.
We look for a second solution of the form y₂(x) = u(x)y₁(x) where u(x) is a function to be determined.
Hence,
y₂'(x) = u'(x)y₁(x) + u(x)y₁'(x) and
y₂''(x) = u''(x)y₁(x) + 2u'(x)y₁'(x) + u(x)y₁''(x)
Substituting y and its derivatives into the differential equation and simplifying, we get
u''(x)cos(2x) + (4u'(x) - 2u(x))sin(2x)
= 2e cos 2x
Note that
y₁(x) = [tex]e^(-x)cos(2x)[/tex] is a solution to the homogeneous differential equation.
Thus, we can simplify the left-hand side of the equation above to u''(x)cos(2x) = 2e cos 2x
The solution to this differential equation is u(x) = Ax²/2 + B, where A and B are constants.
Therefore, the general solution to the nonhomogeneous differential equation is given by
[tex]y(x) = y_h(x) + y₂(x) = c₁e^(-x)cos(2x) + c₂e^(-x)sin(2x) + (Ax²/2 + B)e^(-x)cos(2x)[/tex]
Know more about the general solution
https://brainly.com/question/30079482
#SPJ11
15. If f:G+ G is a homomorphism of groups, then prove that F = {a e Gf(a) = a} is a subgroup of G
It is proved that if f: G → G is a homomorphism of groups then F = {a ∈ G: f(a) = a} is a subgroup of G.
Given that, f: G → G is a homomorphism of groups and it is also defined as
F = {a ∈ G: f(a) = a}
Let a, b ∈ F so we can conclude that,
f(a) = a
f(b) = b
Now, f(a ⊙ b)
= f(a) ⊙ f(b) [Since f is homomorphism of groups]
= a ⊙ b
Thus, a, b ∈ F → a ⊙ b ∈ F
Again,
f(a⁻¹) = {f(a)}⁻¹ [Since f is homomorphism of groups]
= a⁻¹
Thus, a ∈ F → a⁻¹ ∈ F.
Hence, F is a subgroup of G.
To know more about homomorphism here
https://brainly.com/question/32556636
#SPJ4
Courses College Credit Credit Transfer My Line Help Center Topic 2: Basic Algebraic Operations Multiply the polynomials by using the distributive proper (8t7u³)(3t^u³)
The distributive property is used to multiply the polynomials.
To do so, the first term in the first polynomial is multiplied by the terms in the second polynomial, then the second term in the first polynomial is multiplied by the terms in the second polynomial.
[tex]8t^7u^3 × 3t^u³[/tex]
The first term of the first polynomial multiplied by the second polynomial:
[tex]8t^7u^3 × 3t^u³ = 24t^8u^6[/tex]
The second term of the first polynomial multiplied by the second polynomial:
[tex]8t^7u^3 × 3t^u³ = 24t^7u^6[/tex]
Therefore, the final answer after multiplying the polynomials using the distributive property is:
[tex]24t^8u^6 + 24t^7u^6.[/tex]
To know more about polynomial visit:
https://brainly.com/question/11536910
#SPJ11