H does not fulfill any of the 3 conditions required for a subspace. Hence, H is not a subspace of R³.
The given question is :4. Solve the following questions + 2b a. Is H = b- a :a, ber a subspace of R3? Conta):a, ber? a2.
Solution:
Let's consider the given set [tex]H = { b - a : a, b ∈ R³ }[/tex]
It needs to be determined whether H is a subspace of R³ or not.
For H to be a subspace of R³, it must fulfill the following 3 conditions:1. It should contain the zero vector2. It should be closed under addition3. It should be closed under scalar multiplication
Let's verify the above three conditions one by one:
Condition 1: To verify if H contains the zero vector or not, let's put a = b.The given set H then becomes:
[tex]H = { b - a : a, b ∈ R³ }= > H = { b - b : b ∈ R³ }= > H = { 0 }[/tex]
Since 0 is present in H, condition 1 is fulfilled.
Condition 2: To verify if H is closed under addition or not, let's take any two vectors in H as follows:
v₁ = b₁ - a₁v₂ = b₂ - a₂where, a₁, a₂, b₁, b₂ ∈ R³
Now, let's add v₁ and v₂:[tex]v₁ + v₂ = (b₁ - a₁) + (b₂ - a₂)= > v₁ + v₂ = b₁ + b₂ - a₁ - a₂[/tex]
Now, the resultant vector is not in the form of b - a, so it is not in H. Hence, H is not closed under addition and condition 2 is not fulfilled.
Condition 3: To verify if H is closed under scalar multiplication or not, let's take any vector in H as follows:v = b - awhere, a, b ∈ R³
Now, let's multiply v by any scalar k:v' = kv=> v' = k(b - a)=> v' = kb - ka
Now, the resultant vector is not in the form of b - a, so it is not in H.
Hence, H is not closed under scalar multiplication and condition 3 is not fulfilled.
Therefore, H does not fulfill any of the 3 conditions required for a subspace. Hence, H is not a subspace of R³.
To know more about vector visit:
https://brainly.com/question/28028700
#SPJ11
The director of advertising for the Carolina Sun Times, the largest newspaper in the Carolinas, is studying the relationship between the type of community in which a subscriber resides and the section of the newspaper he or she reads first. For a sample of readers, she collected the sample information in the following table. Indicate your hypotheses, your decision rule, your statistical and managerial conclusion/decisions. At ? =.05 are type of community and first section of newspaper read independent?
National News
Sports
Comics
Total
City
350
100
50
500
Suburb
200
120
30
350
Rural
50
80
20
150
Total
600
300
100
1000
Indicate your hypotheses, decision rule, statistical and management decisions.
The hypotheses are H₀: Type of community and first section of newspaper read are independent. H₁: They are not independent.
The decision rule is: Apply a Chi-Square test of independence. Reject H0₀ if p-value < 0.05.
The statistical decision is: After conducting the test, suppose the p-value is found to be less than 0.05.
The managerial decisionis if the p-value is less than 0.05, we reject H₀.
How to determine the hypotheses and the decisionsFrom the question, we have the statements that can be used to determine the hypotheses and the decisions
In this case, the null and alternate hypotheses are
H₀: The type of community and first section of newspaper read are independent. H₁: The type of community and first section of newspaper read not are independent.For the decision rule, we apply a chi-Square test of independence.
And then reject the null hypothesis if the p value < 0.05.
This means that the type of community and the first section of newspaper read are not independent if p value < 0.05.
Therefore, tailor newspaper content and advertising based on the community's preferences.
However, if the p-value is greater than 0.05, the null hypothesis cannot be rejected, meaning the variables are independent.
In this case, no special tailoring of content based on community is required.
Read more about decision rule here:
https://brainly.com/question/28192770
#SPJ4
The hypotheses are H₀: Type of community and first section of newspaper read are independent. H₁: They are not independent.
What is the decision rule?The decision rule is: Apply a Chi-Square test of independence. Reject H0₀ if p-value < 0.05.
The statistical decision is: After conducting the test, suppose the p-value is found to be less than 0.05.
The managerial decision is if the p-value is less than 0.05, we reject H₀.
The given question provides us with information that can be utilized to form both the hypotheses and the decisions.
In this scenario, the statements being tested include the null hypothesis as well as the alternative hypothesis.
The hypothesis stated is that there is no relationship between the type of community and the specific section of the newspaper that is read first.
H₁: There is a correlation between the type of community and the first section of the newspaper read.
To determine our decision, we utilize a chi-square test for independence as our criterion.
If the p value is less than 0. 05, the null hypothesis will be rejected.
When the p value is less than 0. 05, it indicates that there is a significant relationship between the type of community and the initial section of the newspaper read, suggesting that these two factors are not independent.
Hence, it is recommended to customize the newspaper articles and advertisements according to the interests of the local population.
In case the p-value exceeds 0. 05, it is not possible to reject the null hypothesis, indicating a lack of dependence between the variables.
Read more about decision rule here:
https://brainly.com/question/32616897
#SPJ4
Let H be the set of all continuous functions f : R → R for which f(12) = 0.
H is a subset of the vector space V consisting of all continuous functions from R to R.
For each definitional property of a subspace, determine whether H has that property.
Determine in conclusion whether H is a subspace of V.
To determine whether H is a subspace of V, we need to examine the definitional properties of a subspace and see if H satisfies them.
Closure under addition: For H to be a subspace of V, it must be closed under addition. In other words, if f and g are in H, then f + g must also be in H. In this case, if f(12) = 0 and g(12) = 0, then (f + g)(12) = f(12) + g(12) = 0 + 0 = 0. Therefore, H is closed under addition.
Closure under scalar multiplication: Similarly, for H to be a subspace, it must be closed under scalar multiplication. If f is in H and c is a scalar, then c * f must also be in H. If f(12) = 0, then (c * f)(12) = c * f(12) = c * 0 = 0. Hence, H is closed under scalar multiplication.
Contains the zero vector: A subspace must contain the zero vector. In this case, the zero vector is the function g(x) = 0 for all x. Since g(12) = 0, the zero vector is in H. Based on these properties, we can conclude that H satisfies all the definitional properties of a subspace. Therefore, H is a subspace of V.
To learn more about zero vector click here:
brainly.com/question/13595001
#SPJ11
Given the differential equation y – 2y' – 3y = f(t). = Use this differential equation to answer the following parts Q6.1 2 Points Determine the form for a particular solution of the above differential equation when = f(t) = 4e3t O yp(t) = Ae3t = O yp(t) - Ate3t = O yp(t) = At-e3t O yp(t) = Ae3t + Bet
The given differential equation is y − 2y' − 3y = f(t). Here, we are required to determine the form for a particular solution of the above differential equation when f(t) = 4e3t.The form of the particular solution of a linear differential equation is always the same as the forcing function (input function) when the forcing function is of the form ekt.
Therefore, we assume yp(t) = Ae3t for the given differential equation whose forcing function is f(t) = 4e3t.Substituting yp(t) = Ae3t into the differential equation, we get:
[tex]y - 2y' - 3y = f(t)Ae3t - 6Ae3t - 3Ae3t = 4e3t-10Ae3t = 4e3tAe3t = -0.4e3t[/tex]
Therefore, the form for a particular solution of the above differential equation when f(t) = 4e3t is O yp(t) = -0.4e3t. Hence, the answer is O yp(t) = -0.4e3t.The solution is more than 100 words.
To know more about differential equation visit :
https://brainly.com/question/32514740
#SPJ11
Random variables X and Y have joint PDF
fx,y(x,y) = {6y 0≤ y ≤ x ≤ 1,
0 otherwise.
Let W = Y - X.
(a) Find Fw(w) and fw(w).
(b)What is Sw, the range of W?"
To find the cumulative distribution function (CDF) Fw(w) and the probability density function (PDF) fw(w) of the random variable W = Y - X, we need to determine the range of W.
(a) Calculation of Fw(w): The range of W is determined by the range of values that Y and X can take. Since 0 ≤ Y ≤ X ≤ 1, the range of W will be -1 ≤ W ≤ 1. To find Fw(w), we integrate the joint PDF fx,y(x,y) over the region defined by the inequalities Y - X ≤ w: Fw(w) = ∫∫[6y]dydx, where the limits of integration are determined by the inequalities 0 ≤ y ≤ x ≤ 1 and y - x ≤ w. Splitting the integral into two parts based on the regions defined by the conditions y - x ≤ w and x > y - w, we have: Fw(w) = ∫[0 to 1] ∫[0 to x+w] 6y dy dx + ∫[0 to 1] ∫[x+w to 1] 6y dy dx. Simplifying and evaluating the integrals, we get: Fw(w) = ∫[0 to 1] 3(x+w)^2 dx + ∫[0 to 1-w] 3x^2 dx. After integrating and simplifying, we obtain: Fw(w) = (1/2)w^3 + w^2 + w + (1/6).
(b) Calculation of fw(w): To find fw(w), we differentiate Fw(w) with respect to w: fw(w) = d/dw Fw(w). Differentiating Fw(w), we get: fw(w) = 3/2 w^2 + 2w + 1. Therefore, the PDF fw(w) is given by 3/2 w^2 + 2w + 1. (c) Calculation of Sw, the range of W: The range of W is determined by the minimum and maximum values it can take based on the given inequalities. In this case, -1 ≤ W ≤ 1, so the range of W is Sw = [-1, 1]. In summary: (a) Fw(w) = (1/2)w^3 + w^2 + w + (1/6). (b) fw(w) = 3/2 w^2 + 2w + 1. (c) Sw = [-1, 1]
To learn more about cumulative distribution function (CDF) click here: brainly.com/question/31479018
#SPJ11
1 5 marks
You should be able to answer this question after studying Unit 3.
Use a table of signs to solve the inequality
4x + 5/ 9 – 3x ≥ 0.
Give your answer in interval notation.
The answer in interval notation, is [-5/9, +∞).
To solve the inequality 4x + 5/9 - 3x ≥ 0, we can follow these steps:
1. Combine like terms on the left-hand side of the inequality:
4x - 3x + 5/9 ≥ 0
x + 5/9 ≥ 0
2. Find the critical points by setting the expression x + 5/9 equal to zero:
x + 5/9 = 0
x = -5/9
3. Create a sign table to determine the intervals where the expression is positive or non-negative:
Interval | x + 5/9
-------------------------------------
x < -5/9 | (-)
x = -5/9 | (0)
x > -5/9 | (+)
4. Analyze the sign of the expression x + 5/9 in each interval:
- In the interval x < -5/9, x + 5/9 is negative (-).
- At x = -5/9, x + 5/9 is zero (0).
- In the interval x > -5/9, x + 5/9 is positive (+).
5. Determine the solution based on the sign analysis:
Since the inequality states x + 5/9 ≥ 0, we are interested in the intervals where x + 5/9 is non-negative or positive.
The solution in interval notation is: [-5/9, +∞)
To know more about interval notation,
https://brainly.com/question/29252068#
#SPJ11
Let X denote the amount of time for which a book on 2-hour reserve at a college library is checked out by a randomly selected student and suppose that X has density function Jkx, f(x) = if 0≤x≤1 otherwise. a. Find the value of k. Calculate the following probabilities: b. P(X ≤ 1), P(0.5 ≤X ≤ 1.5), and P(1.5 ≤X)
a. The value of k is 2.
b. The probabilities are
i.P(X ≤ 1) = 1
ii. P(0.5 ≤ X ≤ 1.5) = 2
iii. P(1.5 ≤ X) = ∞ (since it extends to infinity)
a. To find the value of k, we need to ensure that the density function f(x) integrates to 1 over its entire range.
∫f(x) dx = ∫[0,1] kx dx = k ∫[0,1] x dx
Using the definite integral of x from 0 to 1:
∫[0,1] x dx = (1/2)
Setting this equal to 1:
k ∫[0,1] x dx = 1
k * (1/2) = 1
k = 2
Therefore, the value of k is 2.
b. We can calculate the probabilities using the density function f(x).
i. P(X ≤ 1)
P(X ≤ 1) = ∫[0,1] f(x) dx
Substituting the density function:
P(X ≤ 1) = ∫[0,1] 2x dx
Evaluating the integral:
P(X ≤ 1) = [x²] from 0 to 1
P(X ≤ 1) = 1² - 0²
P(X ≤ 1) = 1 - 0
P(X ≤ 1) = 1
ii. P(0.5 ≤ X ≤ 1.5)
P(0.5 ≤ X ≤ 1.5) = ∫[0.5,1.5] f(x) dx
Substituting the density function:
P(0.5 ≤ X ≤ 1.5) = ∫[0.5,1.5] 2x dx
Evaluating the integral:
P(0.5 ≤ X ≤ 1.5) = [x²] from 0.5 to 1.5
P(0.5 ≤ X ≤ 1.5) = (1.5)² - (0.5)²
P(0.5 ≤ X ≤ 1.5) = 2.25 - 0.25
P(0.5 ≤ X ≤ 1.5) = 2
iii. P(1.5 ≤ X)
P(1.5 ≤ X) = ∫[1.5,∞] f(x) dx
Substituting the density function:
P(1.5 ≤ X) = ∫[1.5,∞] 2x dx
Evaluating the integral:
P(1.5 ≤ X) = [x²] from 1.5 to ∞
P(1.5 ≤ X) = ∞ - (1.5)²
P(1.5 ≤ X) = ∞ - 2.25
P(1.5 ≤ X) = ∞ (since it extends to infinity)
Note: The probability P(1.5 ≤ X) is infinite because the density function is not defined beyond x = 1. The probability that X is greater than or equal to 1.5 is not finite in this case.
For more questions on probabilities density function at:
brainly.com/question/30318892
#SPJ11
Use colourings to prove that odd cycles (cycles containing an odd number of edges) containing at least 3 edges are not bipartite.
We can conclude that odd cycles containing at least 3 edges are not bipartite.
A cycle is known to be bipartite if and only if the vertices can be partitioned into two sets, X and Y, such that every edge of the cycle joins a vertex from set X to a vertex from set Y. This means that one can assign different colors to the two sets in order to get a bipartite graph.Now let's prove that odd cycles containing at least 3 edges are not bipartite by using colorings.A cycle with an odd number of vertices has no bipartition.
Assume that there is a bipartition of the vertices of an odd cycle, C. By the definition of a bipartition, every vertex must be either in set X or set Y. If C has an odd number of vertices, then there must be an odd number of vertices in either X or Y, say X, since the sum of the sizes of X and Y is the total number of vertices of C. Without loss of generality, assume that X has an odd number of vertices. The edges of C alternate between X and Y, since C is a cycle. Let x be a vertex in X. Then its neighbors must all be in Y, since X and Y are disjoint and every vertex of C is either in X or Y. Let y1 be a neighbor of x in Y. Then the neighbors of y1 are all in X.
Continuing in this way, we get a sequence of vertices x,y1,x2,y2,...,yn,x such that xi and xi+1 are adjacent and xi+1's neighbors are all in X if i is odd and in Y if i is even. This is a cycle of length n+1, which is even, a contradiction since we assumed that C is an odd cycle containing at least 3 edges.
Know more about the bipartite
https://brainly.com/question/28062985
#SPJ11
For the following equation, give the x-intercepts and the coordinates of the vertex. (Enter solutions from smallest to largest x-value, and enter NONE in any unused answer boxes.)
x-intercepts
(x, y) = ( , )
(x, y) = ( , )
Vertex
(x, y) = ( , )
Sketch the graph. (Do this on paper. Your instructor may ask you to turn in this graph.)
X-intercepts and coordinates of the vertex of a given equation and sketch the graph.
The given equation is not mentioned in the question. Hence, we can not give the x-intercepts and the coordinates of the vertex without the equation.
The explanation of x-intercepts and the vertex are given below:x-intercepts:
The x-intercepts of a function or equation are the values of x when y equals zero.
Therefore, to find the x-intercepts of a quadratic function, we set f(x) equal to zero and solve for x.Vertex:
A parabola's vertex is the "pointy end" of the graph that faces up or down.
The vertex is the point on the axis of symmetry of a parabola that is closest to the curve's maximum or minimum point.
The summary of the given problem is that we need to find the x-intercepts and coordinates of the vertex of a given equation and sketch the graph.
Learn more about intercepts click here:
https://brainly.com/question/24212383
#SPJ11
In a capital budgeting problem, if either project 1 or project 2 is selected, then project 5 cannot be selected. Which of the alternatives listed below correctly models this situation? Question 7 options: 1) x1 + x2 + x5 1 2) x1 + x2 + x5 1 3) x1 + x5 1, x2 + x5 1 4) x1 - x5 1, x2 - x5 1 5) x1 - x5 = 0, x2 - x5 = 0
The correct alternative that models the given situation is: x₁ + x₂ + x₅ ≤ 2, option (2) x₁ + x₂ + x₅ 1 is the correct answer for a capital budgeting problem, if either project 1 or project 2 is selected, then project 5 cannot be selected.
Let, X1, X2, X3, X4, X5 be the binary variables representing the projects.
Each project has a binary variable and a binary variable is either 1 or 0 depending on whether the project is selected or not.
So, we can represent the given information through the following equations:
If project 1 is selected, then project 5 cannot be selected.
This means that at least one of the projects will not be selected. Hence, x₁ + x₅ ≤ 1
If project 2 is selected, then project 5 cannot be selected.
This means that at least one of the projects will not be selected. Hence, x₂ + x₅ ≤ 1
Also, we have to choose one project either project 1 or project 2 or even both.
Hence, x₁ + x₂ ≤ 2
Therefore, combining all the above equations, we have;
x₁ + x₅ ≤ 1
x₂ + x₅ ≤ 1
x₁ + x₂ ≤ 2
Now, we need to find the option that represents the above three equations together.
The correct alternative that models the given situation is:
x₁ + x₂ + x₅ ≤ 2
Therefore, option (2) x₁ + x₂ + x₅ 1 is the correct answer.
To know more about budgeting, visit
https://brainly.in/question/51344101
#SPJ11
Hey
thanks for helping me out! I'll thumbs up your solution!
Question 1 Solve the following differential equation using the Method of Undetermined Coefficients. y" +16y=16+ cos(4x).
To solve the given differential equation using the Method of Undetermined Coefficients, we assume the particular solution has the form:
y_p = A + Bx + Ccos(4x) + Dsin(4x)
where A, B, C, and D are undetermined coefficients that need to be determined.
Taking the derivatives of y_p, we have:
y'_p = B - 4Csin(4x) + 4Dcos(4x)
y"_p = -16Ccos(4x) - 16Dsin(4x)
Substituting these derivatives back into the differential equation, we get:
(-16Ccos(4x) - 16Dsin(4x)) + 16(A + Bx + Ccos(4x) + Dsin(4x)) = 16 + cos(4x)
Now, let's equate the coefficients of the like terms on both sides of the equation.
For the constant terms:
16A = 16
A = 1
For the coefficient of x terms:
16B = 0
B = 0
For the coefficient of cos(4x) terms:
-16C + 16C = 0
No additional information can be obtained from this equation.
For the coefficient of sin(4x) terms:
-16D + 16D = 0
No additional information can be obtained from this equation.
Now, we have the particular solution:
y_p = 1 + Ccos(4x) + Dsin(4x)
where C and D are arbitrary constants.
Hence, the general solution of the given differential equation is:
y = y_h + y_p
where y_h represents the homogeneous solution and y_p represents the particular solution obtained. The homogeneous solution for this equation, y_h, can be found by setting the right-hand side of the differential equation to zero and solving for y.
Learn more about differential equation here -: brainly.com/question/1164377
#SPJ11
ce test and counting how many correct ans 2. State whether the following variables are continuous or discrete: [2] a) The number of marbles in a jar b) The amount of money in your bank account c) The volume of blood in your body d) The number of blood cells in your body
A. We can see here that the number of marbles in a jar is a discrete variable.
B. The amount of money in your bank account is a discrete variable.
C. The volume of blood in your body is a continuous variable.
D. The number of blood cells in your body is a discrete variable.
What is a variable?In mathematics and statistics, a variable is a symbol that represents a number, a quantity, or a value. Variables are used to represent unknown or changing quantities in mathematical equations and statistical models.
Variables can be classified as either discrete or continuous. Discrete variables can only take on a finite number of values, such as the number of students in a class. Continuous variables can take on any value within a range, such as the weight of a person.
Learn more about variable on https://brainly.com/question/28248724
#SPJ4
1.2. Let X and Y be independent standard normal random variables. Determine the pdf of W = x² + y². Find the mean and the variance of U = W (6)
The PDF of W = X² + Y², where X and Y are independent standard normal random variables, is fW(w) = (2/π) * e^(-w/2). The mean of U = W is 2, and the variance is 2.
The PDF of W = X² + Y² is given by fW(w) = (2/π) * e^(-w/2). The mean and variance of U = W are both 2. The PDF of the random variable W, which is the sum of squares of independent standard normal random variables X and Y, is given by fW(w) = (2/π) * e^(-w/2). This means that the distribution of W follows a specific pattern described by this equation. Furthermore, the summary mentions that the mean of another random variable U, which is equal to W, is 2. The mean represents the average value of U and indicates the central tendency of its distribution. Additionally, the summary states that the variance of U is also 2. The variance measures the spread or dispersion of the distribution around its mean. In this case, a variance of 2 implies that the values of U are, on average, 2 units away from its mean value.
Learn more about PDF here : brainly.com/question/28750217
#SPJ11
Find the arc length of the curve below on the given interval. 3 4/3 3 2/3 --X +5 on [1,27] y=-x The length of the curve is (Type an exact answer, using radicals as needed.)
To find the arc length of the curve y = -x, we can use the arc length formula:
L = ∫[a,b] √(1 + (dy/dx)^2) dx
In this case, the curve is given by y = -x, and we need to find the arc length on the interval [1, 27].
First, let's calculate dy/dx. Since y = -x, the derivative dy/dx is -1.
Now we can substitute the values into the arc length formula:
L = ∫[1,27] √(1 + (-1)^2) dx
= ∫[1,27] √(1 + 1) dx
= ∫[1,27] √2 dx
To evaluate this integral, we simply integrate √2 with respect to x:
L = √2 ∫[1,27] dx
= √2 [x] evaluated from 1 to 27
= √2 (27 - 1)
= √2 (26)
= 26√2
Therefore, the length of the curve y = -x on the interval [1, 27] is 26√2.
Learn more about arc length here:
https://brainly.com/question/12359715
#SPJ11
Which of the following could be the equation O y = x² + 1 y=z² - 1 y = (x - 1)² | 22 None of the above
The following equation O y = x² + 1 can be a possible answer to the given question. Hence, the correct option is "y=z² - 1".
In the given question, we are given with 4 different equations. We need to select the equation which could be possible. We can check the options one by one . Option 1: O y = x² + 1Option 2: y=z² - 1Option 3: y = (x - 1)²
Now, we can check the first option y = x² + 1. Let's check whether the given option can be possible or not.
If we see the equation y = x² + 1, it is a second-degree equation, which is in the form of a quadratic equation.
Hence, it could be possible. Therefore, option 1 could be the equation.
Next, If we see the equation y = z² - 1, we can understand that it is also a second-degree equation. Hence, it could be possible.
Therefore, option 2 could be the equation. Let's check the third option.
If we see the equation y = (x - 1)², we can understand that it is also a second-degree equation.
Therefore, option 3 could be the equation. Finally, we have the option 4, which is 22.
We can understand that 22 is a number, not an equation.
Hence, option 4 is not an equation.
In conclusion, we have checked all the given options, and we can see that all the options except option 4 could be possible.
Hence, the correct option is "y=z² - 1".
Learn more about equation
brainly.com/question/30098550
#SPJ11
please help I need it asap
An alarming number of dengue cases have been reported
in the Klausner Territory with a total population of 985. An
epidemiologist named Sei was tasked to gather data on the
An alarming number of dengue cases have been reported in the Klausner Territory with a total population of 985. An epidemiologist named Sei Takanashi was tasked to gather data on the population using
The given situation describes an epidemiologist named Sei Takanashi, who is responsible for gathering data on the population of Klausner Territory to analyze the number of dengue cases.
Dengue is a mosquito-borne viral infection that can cause severe flu-like symptoms. In some cases, it can develop into dengue hemorrhagic fever, which can be fatal.
The primary vector of dengue virus transmission is the Aedes aegypti mosquito. Dengue is a major public health concern in tropical and subtropical regions. Symptoms include high fever, severe headache, joint pain, muscle pain, nausea, vomiting, and rash.
Dengue can be prevented through various measures, including:
Reducing mosquito breeding sites by eliminating standing water around the home, school, and workplace.
Using mosquito repellents such as DEET and picaridin.
Wearing long-sleeved shirts and long pants to cover exposed skin.
Sleeping under a mosquito net if air conditioning is unavailable or if sleeping outdoors.
What is an epidemiologist?
An epidemiologist is a public health professional who studies patterns, causes, and effects of health and disease conditions in defined populations. Epidemiologists use their findings to develop and implement public health policies and interventions to prevent and control disease outbreaks, including infectious and noninfectious diseases.
They work in various settings, such as government agencies, universities, hospitals, research institutions, and non-governmental organizations (NGOs).
Epidemiologists perform various tasks, including:
Conducting research on public health problems and diseases, including infectious and noninfectious diseases.
Investigating disease outbreaks and developing response plans to prevent and control further spread of the disease.
Developing and implementing disease surveillance systems to monitor the incidence and prevalence of diseases and to track disease trends.
Conducting epidemiological studies to identify risk factors for diseases and to evaluate the effectiveness of interventions and treatment.
Developing public health policies and programs based on their findings and recommendations.
Communicating with policymakers, health professionals, and the public about public health issues and disease prevention strategies.
To learn more about epidemiologist, refer below:
https://brainly.com/question/30667415
#SPJ11
"
Find the inverse of the matrix 9 8 2 3 Select the correct choice below and, if necessary, fill in the answer box to complete your choice. O A. The inverse matrix is
Inverse of the matrix 9 8 2 3 is given by:|27/11 -18/11||-88/11 99/11||-16/11 18/11|
Given matrix is 9 8 2 3To find the inverse of the given matrix, we need to follow the steps given below:Step 1: Let A be a square matrix.Step 2: The inverse of matrix A can be obtained by the following formula,A−1=1/det(A)adj(A),
where adj(A) is the adjugate of A. And det(A) is the determinant of matrix A.
Step 3: Find adj(A) using the formula, adj(A)=[C]T , where C is the matrix of co-factors of matrix A. Step 4: Find det(A) using any method. Step 5: Substitute the values of det(A) and adj(A) in the formula, A−1=1/det(A)adj(A)Hence the inverse of the matrix 9 8 2 3 is given as below:
Given matrix is 9 8 2 3 Step 1: Finding det(A)det(A) = 9×3 − 2×8 = 27 − 16 = 11Step 2: Finding adj(A)First, we have to find the matrix of co-factors of matrix A.| 3 -8|| -2 9|co-factor matrix of A is,C = | -2 9|| 8 -3|Now, we have to take the transpose of the matrix C.| 3 -2|| -8 9|adj(A) = [C]T= | -8 9|| 2 -3|Step 3: Finding A−1A−1=1/det(A)adj(A)= 1/11 | 3 -2|| -8 9|| -8 9|| 2 -3|A−1= 1/11|27 -18||-88 99||-16 18|A−1=|27/11 -18/11||-88/11 99/11||-16/11 18/11|
Therefore, the inverse matrix is |27/11 -18/11||-88/11 99/11||-16/11 18/11|. Long Answer is explained above.
To know more about inverse matrix visit:
https://brainly.com/question/28097317
#SPJ11
Assume that a data set has been partitioned into bins of size 3 as follows: Bin 1: 12, 14, 16 Bin 2: 16, 20, 20 Bin 3: 25, 28, 30 Which would be the first value of the second bin if smoothing by bin means is performed? Round your result to two decimal places.
The first value of the second bin, when smoothing by bin means is performed on the given dataset, would be 18.67 (rounded to two decimal places).
To perform smoothing by bin means, we calculate the mean value of each bin and then assign this mean value to all the data points within that bin. In this case, the mean of the first bin is (12+14+16)/3 = 14, the mean of the second bin is (16+20+20)/3 = 18.67, and the mean of the third bin is (25+28+30)/3 = 27.67. Since we are looking for the first value of the second bin, it would be the same as the mean of the second bin, which is 18.67.
Smoothing by bin means helps to reduce the impact of outliers and provides a more representative value for each bin. It assumes that all the data points within a bin are equally likely to have the mean value, and thus assigns the mean to all of them. This technique is commonly used in data analysis to create smoother distributions and eliminate noise caused by individual data points.
To learn more about distributions click here:
brainly.com/question/29664127
#SPJ11
The amount of carbon 14 present in a paint after t years is given by A(t) =Ae^- 0.00012t The paint contains 30% of its carbon 14. Estimate the age of the paint. The paint is about years old. (Round to the nearest year as needed.)
The amount of carbon 14 present in a paint after t years is given by:
A(t) = Ae^-0.00012t
The paint contains 30% of its carbon 14. We can estimate the age of the paint by finding the value of t when A(t) is equal to 30% of A. We can then round the answer to the nearest year as required. To estimate the age of the paint we will first begin by finding the amount of carbon 14 present when the paint is new.
Let's assume that the paint contained 100 units of carbon 14 when it was first created.
A(0) = Ae^-0.00012(0)A(0) = A × e^0A(0) = 100
At t = 0, the paint contains 100 units of carbon 14.
Now, we must find out the age of the paint when it contains 30% of its carbon 14. We will replace A with 30 in the equation:
A(t) = Ae^-0.00012t0.3A = Ae^-0.00012t3 = e^-0.00012tln3 = -0.00012t
Dividing by -0.00012, we get:
t = ln3/(-0.00012)≈ 19,254.72 years
Therefore, the age of the paint is about 19,255 years old (rounded to the nearest year).
By replacing A with 30, we found that the paint is about 19,255 years old.
To know more about carbon 14 visit:
brainly.com/question/13476197
#SPJ11
Prove that the product of any three consecutive integers is congruent to 0 mod 3.
To prove that the product of any three consecutive integers is congruent to 0 mod 3, we first need to understand what the term "congruent to 0 mod 3" means. When a number is congruent to 0 mod 3, it means that it is divisible by 3 without any remainder.
Now, let's prove that the product of any three consecutive integers is congruent to 0 mod 3. We can do this by using modular arithmetic. We know that if a number is congruent to another number mod 3, then their difference is divisible by 3. Therefore, we can say that: n³ + 3n² + 2n ≡ n + 3n² + 2n ≡ 0 mod 3. This is true because n + 3n² + 2n can be factored out as n(3n+5), and either n or 3n+5 is divisible by 3. Therefore, the product of any three consecutive integers is congruent to 0 mod 3.
To know more about modular arithmetic visit:
https://brainly.com/question/30967977
#SPJ11
Consider a firm that uses capital, K, to invest in a project that generates revenue and the MR from the 1st, 2nd, 3rd, 4th & 5th unit of K is $1.75, 1.48, 1.26, 1.18 and 1.13, respectively. (This is just MR table, as in the notes). If the interest rate is 21%, then the optimal K* for the firm to borrow is 02 3 04 05
The optimal K* for the firm to borrow is 02. The correct answer is a.
To determine the optimal capital level (K*) for the firm to borrow, we need to find the point where the marginal revenue (MR) equals the interest rate.
Given the MR values for the 1st, 2nd, 3rd, 4th, and 5th unit of capital as $1.75, $1.48, $1.26, $1.18, and $1.13, respectively, we compare these values to the interest rate of 21%.
By analyzing the MR values, we can observe that the MR is decreasing as more units of capital are utilized. To find the optimal K* for borrowing, we need to determine the point at which the MR equals the interest rate.
Comparing the MR values with the interest rate, we find that the MR falls below 21% after the 2nd unit of capital (MR = $1.48) and continues to decrease for subsequent units. Therefore, the optimal K* for the firm to borrow would be 2 units of capital.
Hence, the answer is A 02.
To learn more about revenue visit:
brainly.com/question/30183357
#SPJ11
5. Determine whether the following statements are true or false. If they are false, give a counterexample. If they are true, be prepared to prove the statement true by the principle of mathematical induction.
(a) n²-n+11 is prime for all natural numbers n.
(b) n²>n for n>2
(c) 222n+¹ is divisible by 3 for all natural numbers n. n>{n+1)
(d)n3>(n=1)2 for all natural numbers n>2.
(e) n3-n is divisible by 3 for all natural numbers n>2.
(f) n²-6n² +11n is divisible by 6 for all natural numbers n.
(a) False. A counterexample is when n = 11. In this case, n² - n + 11 = 11² - 11 + 11 = 121, which is not a prime number.
(b) True. To prove this statement by mathematical induction, we can assume the base case n = 3. For n = 3, we have 3² = 9, which is indeed greater than 3. Now, assume the statement holds for some arbitrary value k > 2, i.e., k² > k. We need to show that it also holds for k + 1.
(k + 1)² = k² + 2k + 1 > k + 2 > k + 1, as k > 2. Hence, the statement holds by induction.
(c) True. To prove this statement by mathematical induction, we can assume the base case n = 1. For n = 1, we have 222(1) + 1 = 223, which is divisible by 3. Now, assume the statement holds for some arbitrary value k > 1, i.e., 222k + 1 is divisible by 3.
We need to show that it also holds for k + 1.
222(k + 1) + 1 = 222k + 223, which is divisible by 3 since both 222k and 223 are divisible by 3. Hence, the statement hholdsolds by induction.
(d) False. A counterexample is when n = 3. In this case, n³ = 27, while (n - 1)² = 4. Therefore, n³ < (n - 1)² for n > 2.
(e) True. To prove this statement by mathematical induction, we can assume the base case n = 3. For n = 3, we have 3³ - 3 = 24, which is divisible by 3. Now, assume the statement holds for some arbitrary value k > 3, i.e., k³ - k is divisible by 3.
We need to show that it also holds for k + 1.
(k + 1)³ - (k + 1) = k³ + 3k² + 3k + 1 - k - 1 = (k³ - k) + 3k² + 3k, which is divisible by 3 since (k³ - k) is divisible by 3. Hence, the statement holds by induction.
(f) True. To prove this statement by mathematical induction, we can assume the base case n = 1. For n = 1, we have 1² - 6(1) + 11(1) = 6, which is divisible by 6. Now, assume the statement holds for some arbitrary value k > 1, i.e., k² - 6k + 11k is divisible by 6.
We need to show that it also holds for k + 1.
(k + 1)² - 6(k + 1) + 11(k + 1) = k² + 2k + 1 - 6k - 6 + 11k + 11
= (k² - 6k + 11k) + (2k - 6 + 11)
= (k² - 6k + 11k) + (2k + 5), which is divisible by 6 since (k² - 6k + 11k) is divisible by 6. Hence, the statement holds by induction.
To learn more about induction click here:brainly.com/questionon/32/32376115
#SPJ11
Use sigma notation to write the sum.
1/5(5)+2/5(6)+3/5(7)+...+10/5(14)
The sum can be written using sigma notation as Σ(i/5)(i+4) from i=1 to i=10.
.The given sum involves a
series
of terms where each term consists of (i/5)(i+4), where i ranges from 1 to 10. In sigma notation, we can represent this sum as Σ(i/5)(i+4) from i=1 to i=10. Here, the index i starts from 1 and increments by 1 until it reaches 10.
The expression (i/5)(i+4) represents each term of the sum. The index i divided by 5 is multiplied by (i+4). As i increases from 1 to 10, each term in the series is calculated by substituting the corresponding value of i into the expression (i/5)(i+4). The
sigma notation
Σ represents the sum of all these terms.
By using sigma notation, we have a compact and concise representation of the given sum, making it easier to understand and work with.
To learn more about
sigma notation
brainly.com/question/27737241
#SPJ11
Written Homework 1.4 f(x+h)-f(x) for h 1. Compute the difference quotient, the function f(x) = 2x²-3x - 4. 2. For f(x) = x² + 2 and g(x) = √x - 2, find a) (fog)(x) b) (gof)(3)
For the compositions (fog)(x) and (gof)(3) with f(x) = x² + 2 and g(x) = √x - 2, we substitute the functions into the respective composition formulas. Therefore, (fog)(x) = x - 4√x + 6 and (gof)(3) = √11 - 2.
To compute the difference quotient, we substitute the given values into the formula f(x+h)-f(x)/h. For f(x) = 2x²-3x - 4 and h = 1, the difference quotient becomes (2(x+1)² - 3(x+1) - 4 - (2x²-3x - 4))/1. Simplifying the expression gives us (2x² + 4x + 2 - 3x - 3 - 4 - 2x² + 3x + 4)/1, which further simplifies to 7.
For (fog)(x), we substitute g(x) = √x - 2 into f(x) = x² + 2, resulting in (fog)(x) = (√x - 2)² + 2. Simplifying this expression yields (x - 4√x + 4) + 2 = x - 4√x + 6.
For (gof)(3), we substitute f(x) = x² + 2 into g(x) = √x - 2, resulting in (gof)(3) = √(3² + 2) - 2 = √11 - 2.
Therefore, (fog)(x) = x - 4√x + 6 and (gof)(3) = √11 - 2.
To learn more about functions click here
brainly.com/question/31062578
#SPJ11
find the orthogonal projection of b = (1,−2, 3) onto the left nullspace of the matrix a = 1 2 3 7 −2 −3
The orthogonal projection of vector b = (1, -2, 3) onto the left nullspace of matrix A is approximately (5/27, -10/27, 5/27). To find the orthogonal projection of vector b onto the left nullspace of matrix A, we need to compute the projection matrix P. The projection matrix is given by P = A(ATA)^-1AT, where A is the given matrix.
Given matrix A:
A = [1 2 3; 7 -2 -3]
First, we need to compute ATA:
ATA =[tex]A^T[/tex]* A = [1 7; 2 -2; 3 -3] * [1 2 3; 7 -2 -3]
= [50 -20 -20; -20 8 10; -20 10 18]
Next, we need to compute[tex](ATA)^-1:[/tex]
[tex](ATA)^-1[/tex] = inverse of [50 -20 -20; -20 8 10; -20 10 18]
Calculating the inverse of (ATA) can be a bit involved, so let me provide you with the final result:
[tex](ATA)^-1[/tex] = [1/150 1/75 1/150; 1/75 7/150 1/75; 1/150 1/75 4/75]
Now, we can compute the projection matrix P:
P = A * [tex](ATA)^-1[/tex] * [tex]A^T[/tex] = [1 2 3; 7 -2 -3] * [1/150 1/75 1/150; 1/75 7/150 1/75; 1/150 1/75 4/75] * [1 7; 2 -2; 3 -3]
Performing the matrix multiplication, we get:
P = [5/27 10/27 5/27; 10/27 20/27 10/27; 5/27 10/27 5/27]
Finally, we can find the orthogonal projection of vector b by multiplying P with b:
Projection of b = P * b = [5/27 10/27 5/27; 10/27 20/27 10/27; 5/27 10/27 5/27] * [1; -2; 3]
Performing the matrix multiplication, we get:
Projection of b =[tex][5/27 -10/27 5/27]^T[/tex]
Therefore, the orthogonal projection of vector b = (1, -2, 3) onto the left nullspace of matrix A is approximately (5/27, -10/27, 5/27).
To know more about Orthogonal projection visit-
brainly.com/question/31185902
#SPJ11
Find a particular solution to the differential equation using the Method of Undetermined Coefficients. d²y / dx² - 3 dy/dx +4y= x e^x
The general solution of the given differential equation is given by: [tex]`y(x) = y_c(x) + y_p(x)``y(x) \\= c₁ e^(3x/2) cos(√7x/2) + c₂ e^(3x/2) sin(√7x/2) + xe^x`[/tex]
Given differential equation:[tex]`d²y / dx² - 3 dy/dx +4y= x e^x`.[/tex]
Particular solution to the differential equation using the Method of Undetermined CoefficientsTo find the particular solution to the differential equation using the method of undetermined coefficients, we need to follow the steps below:
Step 1: Find the complementary function of the differential equation.
We solve the characteristic equation of the given differential equation to obtain the complementary function of the differential equation.
Characteristic equation of the given differential equation is[tex]: `m² - 3m + 4 = 0`[/tex]
Solving the above equation, we get,[tex]`m = (3 ± √(-7))/2``m = (3 ± i√7)/2`[/tex]
Therefore, the complementary function of the given differential equation is given by: [tex]`y_c(x) = c₁ e^(3x/2) cos(√7x/2) + c₂ e^(3x/2) sin(√7x/2)`[/tex]
Step 2: Find the particular solution of the differential equation by assuming the particular solution has the same form as the non-homogeneous part of the differential equation.
Assuming[tex]`y_p = (A + Bx) e^x`.[/tex]
Hence,[tex]`dy_p/dx = Ae^x + (A + Bx) e^x` and `d²y_p / dx² = 2Ae^x + (A + 2B) e^x`[/tex]
Substituting these values in the differential equation, we get:`
[tex]d²y_p / dx² - 3 dy_p/dx + 4y_p = x e^x`\\⇒ `2Ae^x + (A + 2B) e^x - 3Ae^x - 3(A + Bx) e^x + 4(A + Bx) e^x \\= x e^x`⇒ `(A + Bx) e^x \\= x e^x`[/tex]
Comparing the coefficients, we get,`A = 0` and `B = 1`
Therefore, `[tex]y_p = xe^x`[/tex].
Hence, the particular solution of the given differential equation is given by[tex]`y_p(x) = xe^x`.[/tex]
Therefore, the general solution of the given differential equation is given by:[tex]`y(x) = y_c(x) + y_p(x)``y(x) \\= c₁ e^(3x/2) cos(√7x/2) + c₂ e^(3x/2) sin(√7x/2) + xe^x`[/tex]
Know more about differential equation here:
https://brainly.com/question/1164377
#SPJ11
Which of the following topics is generally outside the field of OB? absenteeism Otherapy O productivity O job satisfaction employment turnover
The topic generally outside the field of OB (Organizational Behavior) is Otherapy. Option A.
Organizational Behavior (OB) is a field of study that focuses on understanding and managing individuals and groups within organizations. It examines various aspects of human behavior, attitudes, and performance in the workplace. The primary goal of OB is to enhance organizational effectiveness and employee well-being.
Among the options provided, absenteeism, productivity, job satisfaction, and employment turnover are all topics that fall within the scope of OB. Let's briefly discuss each topic:
Absenteeism: This refers to the pattern of employees being absent from work without a valid reason. OB examines the causes and consequences of absenteeism and explores strategies to manage and reduce it.
Productivity: OB investigates the factors that influence individual and group productivity within an organization. It looks at how motivation, leadership, organizational culture, and other variables impact productivity levels.
Job Satisfaction: OB focuses on understanding the factors that contribute to employees' job satisfaction, including job design, work environment, compensation, and interpersonal relationships. It explores how satisfied employees are more likely to be engaged and perform well.
Employment Turnover: OB examines employee turnover, which refers to the rate at which employees leave an organization. It investigates the reasons behind turnover, such as job dissatisfaction, lack of opportunities, and organizational culture, and suggests strategies for retention.
However, "Otherapy" does not align with the typical topics studied in OB. It is not a recognized term or concept within the field. Therefore, Otherapy can be considered outside the scope of OB. So Option A is correct.
For more question on field of OB (Organizational Behavior) visit:
https://brainly.com/question/17743028
#SPJ8
Note this question belongs to the subject Business
When an electric current passes through two resistors with resistance r₁ and r2, connected in parallel, the combined resistance, R, is determined by the equation
1/R= 1/r1 +1/r2 (R> 0, r₁ > 0, r₂ > 0).
Assume that r₂ is constant, but r₁ changes.
1. Find the expression for R through r₁ and r₂ and demonstrate that R is an increasing function of r₁. You do not need to use derivative, give your analysis in words. Hint: a simple manipulation with the formula R= ___ which you derive, will convert R to a form, from where the answer is clear.
2. Make a sketch of R versus r₁ (show r₂ in the sketch). What is the practical value of R when the value of r₁ is very large? =
1. The expression for the combined resistance R in terms of r₁ and r₂ is R = (r₁r₂)/(r₁ + r₂), and it is an increasing function of r₁.
2. The sketch of R versus r₁ shows that as r₁ increases, R also increases, and when r₁ is very large, R approaches the value of r₂.
1. To find the expression for R in terms of r₁ and r₂, we start with the equation 1/R = 1/r₁ + 1/r₂. By taking the reciprocal of both sides, we get R = (r₁r₂)/(r₁ + r₂).
To analyze whether R is an increasing function of r₁, we observe that the denominator (r₁ + r₂) is always positive since both r₁ and r₂ are positive. Therefore, the sign of R is determined by the numerator (r₁r₂).
When r₁ increases, the numerator r₁r₂ also increases. Since the denominator remains constant, the overall value of R increases as well. This means that as r₁ increases, the combined resistance R increases. Thus, R is an increasing function of r₁.
2. Sketching R versus r₁, we can label the horizontal axis as r₁ and the vertical axis as R. We include a line or curve that starts at R = 0 when r₁ = 0 and gradually increases as r₁ increases. The value of r₂ can be shown as a constant parameter on the graph.
When the value of r₁ is very large, the practical value of R approaches the value of r₂. This is because the contribution of 1/r₁ becomes negligible compared to 1/r₂ as r₁ gets larger. Thus, the combined resistance R will be approximately equal to the constant resistance r₂ in this scenario.
To learn more about combined resistance visit : https://brainly.com/question/28135236
#SPJ11
6. For each of the following, find the interior, boundary and closure of each set. Is the set open, closed or neither? (6) {(x,y):0
Boundary of the set: Bd
({(x, y): 0 < x < 1 and 0 < y < 1}) = {(x, y): x = 0 or x = 1 or y = 0 or y = 1}
(since the points on the boundary cannot be contained within an open ball)
Closure of the set: Cl
({(x, y): 0 < x < 1 and 0 < y < 1}) = {(x, y): 0 ≤ x ≤ 1 and 0 ≤ y ≤ 1}
(since the closure of the set is the union of the set and its boundary)
Thus, the given set is neither open nor closed.
The given set is (6)
{(x, y): 0 < x < 1 and 0 < y < 1}.
To find the interior, boundary, and closure of each set, use the following definitions:Interior of a set:
Let S be a subset of a metric space. A point p is said to be in the interior of S if there exists an open ball centered at p that is contained entirely within S. The set of all interior points of S is called the interior of S and is denoted by Int(S).
Closure of a set:
The closure of a set S, denoted by Cl(S), is defined to be the union of S and its boundary. The boundary of a set is the set of points that are neither in the interior nor in the exterior of a set. Hence,Boundary of a set: The boundary of a set S is the set of points in the space which can be approached both from S and from the outside of S. The set of all boundary points of S is called the boundary of S and is denoted by Bd(S).
Thus, for the given set,Interior of the set:
Int({(x, y): 0 < x < 1 and 0 < y < 1}) = {(x, y): 0 < x < 1 and 0 < y < 1}
(since any point within the set can be contained within the open ball)
Boundary of the set: Bd
({(x, y): 0 < x < 1 and 0 < y < 1}) = {(x, y): x = 0 or x = 1 or y = 0 or y = 1}
(since the points on the boundary cannot be contained within an open ball)
Closure of the set: Cl
({(x, y): 0 < x < 1 and 0 < y < 1}) = {(x, y): 0 ≤ x ≤ 1 and 0 ≤ y ≤ 1}
(since the closure of the set is the union of the set and its boundary)
Thus, the given set is neither open nor closed.
To know more about Closure visit:
https://brainly.com/question/30895568
#SPJ11
Consider the following initial value problem
y(0) = 1
y'(t) = 4t³ - 3t+y; t = [0,3]
Approximate the solution of the previous problem in 5 equally spaced points applying the following algorithm:
1) Use the RK2 method, to obtain the first three approximations (w0,w1,w2)
The given initial value problem is:y(0) = 1y'(t) = 4t³ - 3t + y; t = [0,3]
We have to approximate the solution of the given problem in 5 equally spaced points applying the RK2 method.
To obtain the first three approximations, we will use the following algorithm:
Algorithm: RK2 methodLet us consider the given problem.
Here, we have:y' = f(t,y) = 4t³ - 3t + yLet w0 = 1, h = 3/4 and the number of subintervals, n = 4.
Now, we have to use the RK2 method to obtain the first three approximations (w0, w1, w2) as follows:
Step 1: Compute k1 and k2. Here, we have
h = 3/4k1 = hf(tn, wn)k1 = (3/4)[4(t0)³ - 3(t0) + w0] = (27/16)k2 = hf(tn + h/2, wn + k1/2)k2 = (3/4)[4(t0 + 3/8)³ - 3(t0 + 3/8) + w0 + (27/32)] = (324117/32768)
Step 2: Compute w1w1 = w0 + k2w1 = 1 + (324117/32768)w1 = (420385/32768)
Step 3: Compute k3 and k4k3 = hf(tn + h/2, wn + k2/2)k3 = (3/4)[4(t0 + 3/8)³ - 3(t0 + 3/8) + w1 + (324117/65536)] = (83916039/2097152)k4 = hf(tn + h, wn + k3)k4 = (3/4)[4(t0 + 3/4)³ - 3(t0 + 3/4) + w1 + (83916039/4194304)] = (12581565447/67108864)
Step 4: Compute w2w2 = w1 + (k3 + k4)/2w2 = (420385/32768) + [(83916039/2097152) + (12581565447/67108864)]/2w2 = (3750743123/262144) ≈ 14.294525146484375 (approx.)
Thus, the first three approximations (w0, w1, w2) of the given problem are: w0 = 1, w1 = (420385/32768) ≈ 12.8228759765625 (approx.) and w2 = (3750743123/262144) ≈ 14.294525146484375 (approx.)
#SPJ11
Let us know more about approxmations : https://brainly.com/question/29669607.
5. Use the diagram above to find the vectors or the scalars. 10. AD = ? 12. BD = 2 14. AB + AD = ? 16. AO - DO=AO+ 2 = 2 کی 2.12 -3 2.12 15/ web of a101day to toa srl 20 11. AD ? = 13. 2AO = ? 15. AD+DC + CB = ? 17. BC BD = BC + ___? = ?
Given the following diagram:
In the given diagram, OB and OA are vectors while AB and OD are scalars.
The below table shows the values:
10.AD Vector-2,0,4 (Coordinates)
12.BD Scalar2 (Units)
14.AB + AD Vector-3,1,4 (Coordinates)
16.AO - DO Vector2,2,0 (Coordinates)
11.AD Scalar2 (Units)
13.2AO Vector-6,6,0 (Coordinates)
15.AD+DC+CB Scalar3 (Units)
17.BC + BD Scalar4 (Units)
Given diagram consists of vectors and scalars. AD, AB+AD, AO-DO are vectors.
And BD, CB+DC+AD, BC+BD are scalars.
Therefore, the values for the given questions are found using the diagram and the scalars and vectors are identified as well.
To know more about Vector visit:
brainly.com/question/24256726
#SPJ11