Answer:
Splits into
Explanation:
Because fission reaction is divided into two or more pieces.
For a nucleus to go through mitosis,
A. it must start with two sets of chromosomes (diploid)
B. it must start with one set of chromosomes (haploid)
C. it can start with one set or two sets of chromosomes (haploid or diploid)
D. it can start with any number of chromosomes
Answer:
A
Explanation:
I had this in a test
Volume and moles are __________ related. This relationship can be calculated by using ___________ Law.
indirectly; Boyle’s
directly; Boyle’s
indirectly; Charles’
directly; Charles’
indirectly; Avogadro’s
directly; Avogadro’s
Answer:
The correct answer is - directly; Avogadro’s.
Explanation:
At the same temperature and pressure, gases of the same or equal volume have the same number of molecules. The relation between the moles of the gases and the volume of the gases are indirectly proportional to one another at the same temperature and pressure. This law is called Avogadro's law. In the case of an ideal gas of a particular mass has the volume and moles are directly proportional.
Thus, the correct answer is - directly; Avogadro’s.
How can you determine if elements have the same properties?
Answer:
You will know if elements have the same properties if they are in the same column (up and down) on the periodic table.
Explanation:
Ex: Lithium and a hydrogren has the same properites bcause they are both on the same line/column. Columns are up and down the table and rows are left and right. Hope this helps
What is the function of white blood cells?
A) immunity
b) carry nutrients, waste
C) blood clotting
Answer:
A
Explanation:
They help fight infection and other disease
Answer:
immunity is the answer for this question
What is a hot spot? Must be in your own words ( please hurry)
Answer:
It depends. what hot spot are you looking for?
Answer:
A hot spot is an area on Earth over a mantle plume or an area under the rocky outer layer of Earth, called the crust, where magma is hotter than surrounding magma. The magma plume causes melting and thinning of the rocky crust and widespread volcanic activity.
Explanation:
Hope this is what you mean be hot spot!
I hope this helps you!
Why does an asteroid get hotter when it goes close to the sun?
help with my science about the human body
Answer:
am sorry what exactly is your question?
how proved that carbon is present in sugar?
In all living organisms, in substances like carbohydrate, starch, urea etc. To prove sugar contains carbon, take a little amount of sugar in spoon and heat it gently till it melts and turned into yellowish color. On further heating it changes into brown colored mass and then black, which is charcoal.
Answer: sugar treated with strong sulphur acid turns to black
Explanation: sulphur acid removes water from sugars and carbon is left in residue.
This should not to try at home. Water boils when high temperature is achieved.
Also smell of burned sugar occurs
explain what you would do expect caesium astatide to look like .will it be soluble in water ?explain your reasoning
Answer:
it will not be soluble in water Becoz it can only be
separated by passing it through silver nitrate solution
Explanation:
i hope you understand
is oxygen a beginning substance or ending substance?
1L = 1000 mL
Molarity (M) = moles of solute / L of solution
Calculate the moles of NaCl required to prepare 250 mL of 1.5 M aqueous solution.
Answer:· 44 g NaCl Explanation: The problem provides you with the molarity and volume of the target
Explanation:
Identify the type of reaction.
Al + MgSO4 = Al2(SO4)3 + Mg
Answer: its combustion
Explanation:
What are the two products of an acid base neutralization reaction?
Answer:
Neutralization reactions occur when two reactants, an acid and a base, combine to form the products salt and water.
Explanation:
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: Water and NaCl is always formed
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Solution remained colorless.
During the experimentation, the test tube was gently heated in a Bunsen burner flame for 60 seconds. What was the reason for this specific
procedure?
A)
Heating was done to initiate the combustion of the metal in water.
B)
Heating was done to confirm that no chemical reaction would take
place in acid
0
Heating was done to precipitate the chemical change in each test
tube containing water
D)
Heating helped released the hydrogen contained in water
molecules so students would have a positive H+ test.
A hot metal plate at 150°C has been placed in air at room temperature. Which event would most likely take place over the next few minutes?
Molecules in both the metal and the surrounding air will start moving at lower speeds.
Molecules in both the metal and the surrounding air will start moving at higher speeds.
The air molecules that are surrounding the metal will slow down, and the molecules in the metal will speed up.
The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Answer:
The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Explanation:
There will be a transfer of thermal energy (heat) from the hot metal plate to the surrounding air. This transfer of energy equates to a transfer of kinetic energy in the molecules. As the plate loses heat, the molecules in the plate will lose kinetic energy and slow down. As the surrounding air gains heat, the molecules will gain kinetic energy and speed up.
Answer: C
Explanation:
why iodide ions cannot be determined by Mohr method
Answer:
Exactly the same approach can be used for determination of bromides. Other halides and pseudo halides, like I- and SCN-, behave very similarly in the solution, but their precipitate tends to adsorb chromate anions making end point detection difficult.
Hope it helps!
Mohr method is the titration method, used for the determination of the chloride ion concentration in solution. It can not be used for iodine ions, as the alkaline titration is not suitable for iodine.
What is titration?Titration is the analytical process used for the determination of the concentration of a compound, by reacting it with titrant.
The mohr method is the titration method, that determines the concentration of the cations in the solution by titrating them with the salt. The salt formed precipitate in the reaction and the end point is determined.
The limitation to the use of mohr method, is its inability for the analysis of the chlorides of cations, as the reaction is carried out at high pH in alkaline conditions.
The iodide slats are suitably precipitated in the alkaline solution, and thus limits the use of the mohr method.
Learn more about mohr method, here:
https://brainly.com/question/517358
How many calcium atoms are in 56.5 g of calcium?
Answer:
there are 8.501×10^23 atoms of Ca atoms
The fizz in the soda that we drink is carbonic acid. Leaving the soda can open to the environment separates the carbonic acid into water and carbon dioxide. What type of reaction is this and what is the resulting product?
Answer:
The reactionnis known as a decomposition reaction
The equation of the reaction is given below as:
H₂CO₃ -----> H₂O + CO₂
Explanation:
A reaction in which a single compound is split into two or more simpler substances is known as a decomposition reaction.
In the reaction in which when a soda can is opened and left to the environment, the fizz in the soda, carbonic acid, separates into water and carbon dioxide is an example of a decomposition reaction.
The equation of the reaction is given below:
H₂CO₃ -----> H₂O + CO₂
In the reaction above, a larger molecular weight compound, carbonic acid with the molecular, H₂CO₃ is splits into two simpler substances of smaller molecular weight, water, H₂O and carbon dioxide, CO₂.
This reaction rate is made faster by an increase in temperature and by a decrease in pressure of the soda.
Classify the following as either an element, compound, homogeneous mixture or
heterogeneous mixture:
milk
Answer:
HeterogeneousExplanation:
Milk seems to be homogeneous mixture but actually milk is a heterogeneous mixture and a colloid solution.7x[(7+7)divide7]
PLEASE HELP
Answer:
ik this isnt the answer but mathwa will solve all yours problems
Explanation:
Fission and fusion are alike in many ways. However, one difference is
A)
Fusion forms dangerous nuclear waste that is difficult to dispose whereas
fission does not.
Eliminate
B)
Fission is a controllable chain reaction and fusion is not.
Fusion results in a greater product mass whereas fission does not.
D)
Raw materials for fission are cheaper and easy to get.
Explanation:
Fusion vs Fission
In fission, energy is gained by splitting apart heavy atoms, for example uranium, into smaller atoms such as iodine, caesium, strontium, xenon and barium, to name just a few. However, fusion is combining light atoms, for example two hydrogen isotopes, deuterium and tritium, to form the heavier helium. Both reactions release energy which, in a power plant, would be used to boil water to drive a steam generator, thus producing electricity.
Answer:
B
Explanation:
i did this
what makes up the cell menbrane
With few exceptions, cellular membranes — including plasma membranes and internal membranes — are made of glycerophospholipids, molecules composed of glycerol, a phosphate group, and two fatty acid chains. Glycerol is a three-carbon molecule that functions as the backbone of these membrane lipids.
Explanation:
the principal components of plasma membrane are lipids phospholipid and cholesterol proteins and carbohydrates
The diagrams below show the alignment of the Sun, the Moon, and Earth.
Answer:A
Explanation: I learned it from a gizmo
A chunk of zinc is added to a solution of gold (III) nitrate to extract the gold. The reaction forms,
zinc nitrate and the precipitate gold.
Explanation:
Gold (AU)................
Heat transfer that occurs within or between solid objects is called
Answer:
conduction
Explanation:
The answer is Conduction
The molecular weight for the compound from the previous question is
64.07 g/mol. What is its molecular formula?
calculate the ph of one solution containing 0.1 M formic acid and 0.1 M sodium formate before and after the addition of 1mL of 5 M Naoh. how much could the Ph change if the NaOh were added to 1 L of pure water
Answer:
Pka of formic acid (HCOOH)= 3.75
pH= PKa +log [ Sodium formate/ formic acid] = 3.75
NaOH reacts with HCOOH as HCOOH (aq) + NaOH(aq) --> NaCHO2 (aq) and H2O (l)
Moles of HCOOH= 0.1*1= 0.1 moles
Moles of NaOH= 5*1/1000= 0.005 moles
HCOOH is in excess and the excess is = 0.1 - 0.005 = 0.095
Moles of sodium formate = 0.005 + 0.1 = 0.105 moles of HCOOH= 0.095
volume after mixing = 1 + 5 /1 000=1.005
Concentrations : HCOOH= 0.095/1.005 sodium formate= 0.105/1.005
pH= 3.75+log (0.105/0.095)=3.85
When NaOH is added, molarity is , 1*5= 1000*M
M= 5/1000=0.005
The pH remains the same. Only the molarity of NaOH changes.
If 4.0 g of helium gas occupies a volume of 22.4 L at 0 o C and a pressure of 1.0 atm, what volume does 3.0 g of He occupy under the same conditions?
Answer:
the volume occupied by 3.0 g of the gas is 16.8 L.
Explanation:
Given;
initial reacting mass of the helium gas, m₁ = 4.0 g
volume occupied by the helium gas, V = 22.4 L
pressure of the gas, P = 1 .0 atm
temperature of the gas, T = 0⁰C = 273 K
atomic mass of helium gas, M = 4.0 g/mol
initial number of moles of the gas is calculated as follows;
[tex]n_1 = \frac{m_1}{M} \\\\n_1 = \frac{4}{4} = 1[/tex]
The number of moles of the gas when the reacting mass is 3.0 g;
m₂ = 3.0 g
[tex]n_2 = \frac{m_2}{M} \\\\n_2 = \frac{3}{4} \\\\n_2 = 0.75 \ mol[/tex]
The volume of the gas at 0.75 mol is determined using ideal gas law;
PV = nRT
[tex]PV = nRT\\\\\frac{V}{n} = \frac{RT}{P} \\\\since, \ \frac{RT}{P} \ is \ constant,\ then;\\\frac{V_1}{n_1} = \frac{V_2}{n_2} \\\\V_2 = \frac{V_1n_2}{n_1} \\\\V_2 = \frac{22.4 \times 0.75}{1} \\\\V_2 = 16.8 \ L[/tex]
Therefore, the volume occupied by 3.0 g of the gas is 16.8 L.
The volume occupied by 3.0 g of He is mathematically given as
V2=16.8L
What volume does the 3.0 g of He occupy?Question Parameters:
If 4.0 g of helium gas occupies a volume of 22.4 L at 0 o C and a pressure of 1.0 atm, what volume does 3.0 g of H
Generally, the equation for the gas equation is mathematically given as
PV=nRT
When the reacting mass is 3g
n2=3/4
n2=0.75
Therefore
V1/n1=V2/n2
Where
n1=1
[tex]V2=\frac{22.4*0.75}{1}[/tex]
V2=16.8L
Read more about volume
https://brainly.com/question/1578538
A change resulting in one or more new substances being formed is a?
A. nuclear reaction
B.physical property
C. chemical change
D.physical change
Answer:
C. Chemical change
Explanation:
A physical change is where something is changed but it doesnt affect the build up of the chemical. For example, if you broke sticks and threw them on the ground, that would be a physical change because the change is happening to the physical being of the object and not its chemical buildup. However, if you lit those sticks on fire, that would be considered a chemical change because you end up with two substances, ash and the remnants of the stick. A nuclear reaction would result in something blowing up so its not that. And a physical property is like what it looks like or how it smells. Hope I helped you!
Which if the following numbers in your personal life are exact numbers?
A. Your cell phone number
B. Your weight
C. Your IQ
D. Your driver's license number
E. The distance you walked yesterday
Answer:
I think D
Explanation:
Your cell phone number and your driver's license number are the numbers of your personal life that are exact.
In this context, an exact number refers to a number that if it undergoes any modification will not refer to the same thing that it referred to before that modification.
For example, my phone number is 12345. This number is exact because it cannot be changed because or else it would cease to be my phone number, that is, if someone wants to call me and writes the number 12346 it is no longer my number.
Addicionally, if my driver's license number is 112233 it is an exact number because if it is modified it would be the number of another driver.
According to the above, options B, C, and E are incorrect because they are inaccurate numbers because if they are modified they all refer to me and they would not change their meaning.
Learn more in: https://brainly.com/question/17093923