Supplied energy=300kJ
Wasted energy=70.5JUsed energy:-
[tex]\\ \sf\longmapsto 300-70.5=229.5kJ[/tex]
We know
[tex]\boxed{\sf Efficiency=\dfrac{Used\:Energy}{Supplied\:Energy}\times 100}[/tex]
[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{300}\times 100[/tex]
[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{3}[/tex]
[tex]\\ \sf\longmapsto Efficiency=76.5\%[/tex]
The overall efficiency of the electric car = 76.5 %
To find the efficiency the given values are:
Energy supplied = 300 kJ
Energy wasted = 70.5 kJ
Define efficiency and calculate the value of efficiency.In the system the output energy is compared to the input energy is known as efficiency. That can be written as percentage ratio of output energy to the input energy.
Formula of efficiency is,
Efficiency = ( E out / E in ) × 100
Here, Energy supplied = 300 kJ
so, energy used = Energy supplied - Energy wasted
= 300 - 70.5
= 229.5 kJ
Thus, substituting E out = 300 kJ , E in = 229.5 kJ
Efficiency = ( 229.5 / 300 ) ×100
= 229.5 / 3
= 76.5
Hence, The overall efficiency of the electric car is 76.5 %
Learn more about efficiency,
https://brainly.com/question/6834807
#SPJ5
Define Metrology
define Metrology
Answer:
the scientific study of measurement.
A driver of a car stopped at a gas station to fill up his gas tank. He looked at his watch, and the time read exactly 4 : 45 4:45 p.m. At this time, he started pumping gas into the tank. At exactly 4 : 50 4:50, the tank was full and he noticed that he had pumped 12.5 12.5 gallons. What is the average rate of flow of the gasoline into the gas tank
Answer:
Explanation:
Average rate = gallons / minutes
If 12.5gallons in 5mins
Xgallons in 1mins
12.5/5 = 2.5gallons per minute
Select the correct answer. Ben has $10 to spend on dinner. He can have a pizza delivered, drive to a burger place, or go to the grocery store to get ingredients for a fresh salad. In the end, he goes with the salad. If each meal would have cost him the same amount, what is Ben’s incentive for choosing salad? A. to eat a healthier meal B. to help the local economy C. to save gas D. to save on his telephone bill
Answer:
A. to eat a healthier meal
Explanation:
The answer would be A, to eat a healthier meal. Eating a serving of mixed greens can enable Ben to shed pounds in the event that it encourages you to diminish your aggregate calorie admission. Pick filling fixings with the goal that you are not as ravenous and eat less, and keep your plates of mixed greens low in calories so they give fewer calories than the feast or tidbit that they are supplanting.
There is no centripetal force if the object moves in a long line. True or False?
Answer:
true
Explanation:
i think it's true because according to newtons first law of motion an object continues in motion unless compelled by an external force, this external force is known as the centripetal force.
I hope this helps
PLEASE ASAP! I SENT A PHOTO CHECK AND TELL!
Answer:
Answer B is the correct answer: "Motion of one projectile as seen from the other is a straight line."
Explanation:
Let's write the equations of motion for each projectile, using that projectile [tex]a[/tex] is launched with velocity [tex]a[/tex] which has components associated with the angle of launching, given in x and y coordinates as: [tex]a_x\,\,and\,\,a_y[/tex].
Similarly, assume that projectile b is launched with velocity [tex]b[/tex] with components due to the launching angle = [tex]b_x\,\,and \,\,b_y[/tex]
then the equations of motion for the two projectiles launched at the same time (t) from the same spot (position that we assume to be at the origin of coordinates to simplify formulas) are:
[tex]x_a=a_x\,t\\y_a= a_y\,t-\frac{1}{2} g\,t^2\\and\\x_b=b_x\,t\\y_b= b_y\,t-\frac{1}{2} g\,t^2[/tex]
therefore, from the frame of reference of projectile "b", the x and y position of projectile "[tex]a[/tex]" would be:
[tex]x_{a\,b}= x_a-x_b= a_x\,t-b_x\,t=(a_x-b_x)\,t[/tex] which is linear in "t"
[tex]y_{a\,\,b}=y_a-y_b= a_y\,t-\frac{1}{2} g\,t^2-\left[ b_y\,t-\frac{1}{2} g\,t^2\right]=(a_y-b_y)\,t[/tex] which is also linear in t.
Therefore the motion of one projectile with reference to the other is a straight line (answer B)
Notice as well that this two projectiles cannot collide because they have been launched together, and supposedly at different speeds and angles. The only way that they can share the same x-coordinate and the same y-coordinate at the same time "t" is if their velocity components are equal, which is not what we are told.
[tex]x_a=x_b\\a_x\,t= b_x\,t\\and\\y_a= y_b\\a_y\,t-\frac{1}{2} g\,t^2= b_y\,t-\frac{1}{2} g\,t^2\\a_y\,t=b_y\,t\\a_y=b_y[/tex]
A narrow beam of light containing red (660 nm) and blue (470 nm) wavelengths travels from air through a 1.00 cm thick flat piece of crown glass and back to air again. The beam strikes at an incident angle of 30 degrees. (a) At what angles do the two colors emerge
Answer:
The color blue emerges at 19.16° and the color red emerges at 19.32°.
Explanation:
The angle at which the two colors emerge can be calculated using the Snell's Law:
[tex]n_{1}sin(\theta_{1}) = n_{2}sin(\theta_{2})[/tex]
Where:
n₁ is the refractive index of the incident medium (air) = 1.0003
n₂ is the refractive index of the refractive medium:
blue light in crown glass = 1.524
red light in crown glass = 1.512
θ₁ is the angle of the incident light = 30°
θ₂ is the angle of the refracted light
For the red wavelengths we have:
[tex] \theta_{2} = arcsin(\frac{n_{1}sin(\theta_{1})}{n_{2}}) = arcsin(\frac{1.0003*sin(30)}{1.512}) = 19.32 ^{\circ} [/tex]
For the blue wavelengths we have:
[tex] \theta_{2} = arcsin(\frac{n_{1}sin(\theta_{1})}{n_{2}}) = arcsin(\frac{1.0003*sin(30)}{1.524}) = 19.16 ^{\circ} [/tex]
Therefore, the color blue emerges at 19.16° and the color red emerges at 19.32°.
I hope it helps you!
Trey is testing a properly working resistor in a circuit and finds its value to be far lower than he expects what’s a likely error
A. The resistor is faulty
B. The circuit is energized
C. He didn’t cut a lead on the resistor
D. The resistor is installed backwards
Which example best describes a restoring force?
any force that is applied to a spring to change its length
the force applied to stretch a spring and increase its length
the force applied to restore a spring to its original length
the force applied to compress a spring and shorten its length
Answer:
the force applied to restore a spring to its original length
Explanation:
How do parts of a fancy cup (metal like cup) work together to keep a drink cold?
Answer:
“They may feel colder but that's only an illusion,” Dr. Begley says. “Copper mugs actually absorb heat from the room faster than a glass.” Copper is an excellent thermal conductor, meaning it transfers heat from hot sources (like the room or your hand) to cold sources (like your drink) very efficiently.
Explanation:
What areas of the work force can science be applied to?
Select all that apply
government regulatlon
healthcare
a telemarketing
environmental engineering
banking
Answer:
All of the work of lifeExplanation:
In all works of life science can be applied, in-fact science has already been applied already, even in the humanities, social sciences and art related studies sciences is being applied,
Furthermore, the application of science and technology knows no boundaries, and as science is advancing day by day, expanding to new frontiers and breaking new limits so is it application to all works of life and relevance everyday.
A 4-N object object swings on the end of a string as a simple pendulum. At the bottom of the swing, the tension in the string is 9 N. What is the magnitude of the centripetal acceleration of the object at the bottom of the swing? Give the answer as a function of the acceleration due to gravity, g.
Answer:
Explanation:
Given mg = 4N .
m = 4 / g
At the bottom of the swing let centripetal acceleration be a
T - mg = ma
9 - 4 = ma
5 = 4 a / g
a = 5g / 4
An object is moving across a surface, but it does not gain or lose speed. Which best describes the object's force?
O The net force is positive.
O The net force is zero.
The positive force is greater than the negative force.
O The negative force is greater than the positive force.
Mark this and retum
Save and Exit
Next
Submit
Answer:
The net force is positive
Explanation:
This would mean that altogether, the force would cause the object to always be going the same way, and if it is not gaining or losing speed, we can say the force has not changed and that the object has reached terminal velocity. It is not correct to say that the positive is greater than the negative as friction also causes some type of effect and it is neither positive nor negative
What does physics means to you. (own words)
Answer:
the physical properties and phenomena of some thing.
In explannation
Physics is a branch of science. It is one of the most fundamental scientific disciplines. The main goal of physics is to explain how things move in space and time and understand how the universe behaves. It studies matter, forces and their effects. The word physics comes from the Greek .
Please mark me as brainlist
Which waves move fast Longitudinal waves or Transverse waves and why???
Answer:
Transverse wave
Explanation:
Its because in transverse wave the particle displacement is perpendicular to the direction of wave propagation..hope it helps you...
obesity occurs due to (a) overeating of carbohydrates and fats(b) not eating enough carbohydrates and fats (c) overeating of vitamins and minerals (d) not eating enough vitamins and minerals
Answer:
B for BIG
Explanation:
carbs and fats is energy, if not being use or burned off, it'll be becomes body fat.
2. a. in which principle does simple machine works?
Answer:
A simple machine uses a single applied force to do work against a single load force
Ignoring the friction losses. The work done on the load is equal to the work done with the applied energy. The machine can increase the amount of output power, with a corresponding drop in the distance transported by the load.
A machine can never be 100% efficient because some work is always lost due to which factor? friction gravity static input force
Explanation:
Hi,
The answer is friction.
There is almost no machine which are not affected by friction. It losts some work due to friction while working.
Hope it helps..
Answer:
friction
Explanation:
the other options dont effect efficiency
The Coulomb force between two charges q1 and q2 at separation r in air is F. If half of the separation is filled with medium of dielectric constant 9, what will be the value of new coulomb force?
Answer:
The new Coulomb force is q₁q₂/9πε₀r²
Explanation
The coulomb force between the two charges q₁ and q₂ at a distance r in air is given by F = q₁q₂/4πε₀r².
Now, let us assume the material of dielectric constant κ = 9 is placed between them on the side of the q₁ charge. The value of its effective charge is now q₃ = q₁/κ at a distance of d = r/2 from the q₂ charge.
Since we have air between q₂ and q₃, the coulomb force between them is
F' = q₂q₃/4πε₀d²
= q₂(q₁/κ)/4πε₀(r/2)²
= 4q₂q₁/κ4πε₀r²
= 4/κ(q₂q₁/4πε₀r²)
= 4/9 × (q₂q₁/4πε₀r²)
= q₁q₂/9πε₀r²
So, the new Coulomb force is q₁q₂/9πε₀r²
What is the approximate pressure of a storage cylinder of recovered r-410a that does not contain any non-condensable impurities and is stored in a room where the temperature is 80°f?
Answer:
173psig
Explanation:
The storage cylinder of recovered R-410A is mixture of difluoromethane and pentafluoroethane which is used as a refrigerant in air conditioning application. The refrigeration sector has low temperatures for installation. The pressure of cylinder at 80 F will be 173 psig. The pure refrigerants have inside a container have saturation temperature which is equal to ambient temperature.
A containment canister of recovered r-410a has an estimated pressure of 173psig.
The retrieved R-410A preservation container is a blend of difluoromethane and pentafluoroethane, that is used as a compressor in air conditioning systems.
Assembly conditions in the freezer industry are extremely low. At 80 degrees Fahrenheit, the cylinder pressure will be 173 pounds per square inch.
The specific heat capacity of pure refrigeration systems within a cylinder is the same as the room temperature.
Learn more:
https://brainly.com/question/5793747?referrer=searchResults
Which statement accurately describes electronic tools? Check all that apply
Answer:
Electronic tools provide more accurate data and this data is more efficient fast and easy to understand
Hope this helps you!!
A laser beam is incident on two slits with a separation of 0.210 mm, and a screen is placed 5.05 m from the slits. If the bright interference fringes on the screen are separated by 1.59 cm, what is the wavelength of the laser light?
Answer:
0.66*10^-6m
Explanation:
We know that the bright fringes are placed on the screen as follows
Ym= m*(lambda xL/d)
But we are given
L= 5.05
Deta Y= 1.59
d = 0.21
1.59* 10^-2m= lambda * 5.05m/2.1*10^-4m
So lambda=
1.59* 10^-2m x 2.1*10^-4m/ 5.05m
= 0.66*10^-6m
A car is driving at 99 km/h, calculate the distance it travels in 70 minutes.
Give your answer in correct SI units rounded to 0 decimal places.
Answer:
The distance the car travels is 115500 m in S.I units
Explanation:
Distance d = vt where v = speed of the car and t = time taken to travel
Now v = 99 km/h. We now convert it to S.I units. So
v = 99 km/h = 99 × 1000 m/(1 × 3600 s)
v = 99000 m/3600 s
v = 27.5 m/s
The speed of the car is 27.5 m/s in S.I units
We now convert the time t = 70 minutes to seconds by multiplying it by 60.
So, t = 70 min = 70 × 60 s = 4200 s
The time taken to travel is 4200 s in S.I units
Now the distance, d = vt
d = 27.5 m/s × 4200 s
d = 115500 m
So, the distance the car travels is 115500 m in S.I units
an object is +2 m from the reference point. the object starts from rest it travels for 3 seconds and has a final position of -16 m. what is the acceleration of the object?
Answer:
Solution
Given:
initial velocity (u)=0m/s (because an object
starts from the rest)
time (t)=3sec
diatance travelled(s)=14m(16-2=14)
acceleration (a)=?
Now,
According to the formula
s=ut+1/2at^2
or,14 =0×3+1/2×a×3^2
or, 14=0+a/2×9
or, 14=9a/2
or, 9a=28
or, a=28/9
or, a=3.1 m/s^2
Therefore, the acceleration of the object is 3.1m/s^2 ans.
Ans it fastly
i need the ans fastly
NO SPAM
12. C
13. A
14. B
15. D
16. D
17. B
A ball is thrown vertically upwards at an initial speed of
23
m s
−
1
. What is the displacement of the ball 3 seconds after it was thrown?
Answer:
114m
Explanation:
s=ut + 1/2 at^2
s=23 m/s ×3s + 1/2×3×3s^2×10m/s^2
= (69+45)m
= 114m
Which of the following best describes a consumer?
0. a business owner who sells clothes
0. someone who studies economics
O. a farmer who sells his crops
O. a person who buys goods and services
Answer:
a business who buys goods and services
Como surgiu a capoeira?
With the aid of a suitable diagram, explain what is meant by an electromagnetic wave.
Answer:
Electromagnetic waves or EM waves are waves that are created as a result of vibrations between an electric field and a magnetic field. In other words, EM waves are composed of oscillating magnetic and electric fields.
Explanation:
if you ran 15 km/hr for 2.5 hours, how much distance would you cover?
Answer: 37.5 km
Explanation:
The question is that
If you ran 15 km/hr for 2.5 hours, how much distance would you cover ?
Where
Speed = 15 km/ hr
Time = 2.5 hours
Using the formula for speed.
Speed = distance/time
Substitute speed and time into the formula
15 = distance/ 2.5
Make distance the subject of formula by cross multiplying.
Distance = 15 × 2.5
Distance = 37.5 km.
Describe the motion of water waves.
Answer:
Water waves are an example of waves that involve a combination of both longitudinal and transverse motions. As a wave travels through the waver, the particles travel in clockwise circles. The radius of the circles decreases as the depth into the water increases.