1. What happens when like charges are brought closer to each other?


​

Answer:

C. Blood sugar increases b/c insulin lowers blood sugar when it rises too high

Explanation:

Insulin is highly needed by body to regular sugar levels (primarily to lower it when sugar levels rise up). I remember it like this "in" sulin means this hormones "pushes" the sugar inside the cells so that sugar level in the blood comes back to normal.

Therefore, if there is not enough insulin produced by pancreas, blood sugars will rise which can be fatal. That's why some diabetic patients take insulin shots to regulate their blood glucose levels.

Answer:  the area of the telescope lens is \textit{0,08507 ft}

Explanation: Happy I could help!

Answer:

FADH2 is a reducing agent.

FAD is an oxidizing agent.

Explanation:

The full form of FAD is flavin adenine dinucleotide. It is mainly a redox-active coenzyme which is associated with the different proteins and is involved with the enzymatic reactions in the metabolism.

FAD is obtained by donating or accepting electrons.

In the citric acid cycle,

succinate + FAD → fumarate + [tex]$FADH_2$[/tex]

Thus we see that FAD is an oxidizing agent while [tex]$FADH_2$[/tex] is a reducing agent.      

Answer:

The answer is C. the child receives half of is genetic information from each parent

Explanation:

hope this helps enjoy

Answer:

76.0 g

Explanation:

Step 1: Write the balanced equation

2 HCl + Ca(OH)₂ ⇒ CaCl₂ + 2 H₂O

Step 2: Calculate the moles corresponding to 50.0 g of HCl

The molar mass of HCl is 36.46 g/mol.

50.0 g × 1 mol/36.46 g = 1.37 mol

Step 3: Calculate the number of moles of CaCl₂ produced from 1.37 moles of HCl

The molar ratio of HCl to CaCl₂ is 2:1. The moles of CaCl₂ produced are 1/2 × 1.37 mol = 0.685 mol.

Step 4: Calculate the mass corresponding to 0.685 moles of CaCl₂

The molar mass of CaCl₂ is 110.98 g/mol.

0.685 mol × 110.98 g/mol = 76.0 g

Answer:

hkj

Explanation:

Answer:

0.144 M

Explanation:

First we convert 0.307 g of KHP (potassium hydrogen phthalate, KHC₈H₄O₄) into moles, using its molar mass:

1 mol of KHP reacts with 1 mol of NaOH, that means that in 10.40 mL of the NaOH solution there were 0.0015 moles of NaOH.

Now we calculate the molarity of the NaOH solution:

Answer:

B. Ultraviolet

Explanation:

UV has a higher frequency and shorter wavelength than visible light

Answer:

6.59 g/cm³

Explanation:

Step 1: Given data

Step 2: Calculate the volume of the cube

We will use the following expression.

V = s³ = (2.54 cm)³ = 16.4 cm³

Step 3: Calculate the density of the solid

Density is an intrinsic property, equal to the quotient between the mass and the volume.

ρ = m/V

ρ = 108 g / 16.4 cm³ = 6.59 g/cm³

Answer:

0.034 L

Explanation:

From the question given above, the following data were obtained:

Initial volume (V₁) = 0.055 L

Initial pressure (P₁) = stp = 1 atm

Initial temperature (T₁) = stp = 273 K

Final pressure (P₂) = 2.8 atm

Final temperature (T₂) = 195 °C = 195 °C + 273 = 468 K

Final volume (V₂) =?

The final volume of the gas can be obtained as follow:

P₁V₁ / T₁ = P₂V₂ / T₂

1 × 0.055 / 273 = 2.8 × V₂ / 468

0.055 / 273 = 2.8 × V₂ / 468

Cross multiply

273 × 2.8 × V₂ = 0.055 × 468

764.4 × V₂ = 25.74

Divide both side by 764.4

V₂ = 25.74 / 764.4

V₂ = 0.034 L

Therefore, the new volume of the gas is 0.034 L.

Answer:

Your answer would be D, they are all non-renewable energy sources. Hope this helps!

Answer:

D. They are all nonrenewable energy sources.

Answer:

B. 4.32 x 10-19 J is correct via a p e x

Explanation:

here's your answer..

The nucleons are havier in sub atomic particle like neutrons and protons.

fun fact i read in a book even 1cm³ of nucleons are around 2 million Kg which you can't pick up by hand even by machines like buldozer.

We are given:

Initial concentration of HA: 0.200 Molar

The acid is 9.4% ionized

Dissociation constant (α) = (Percent Ionized) / 100 = 0.094

Molar concentration of H+ = 0.0188

Let's Chill! (making the ICE box):

Reaction:       HA         ⇄       H⁺      +      A⁻

Initial:           0.200M               -                -

Equilibrium: 0.200(1-α)      0.200α       0.200α

while we're here, let's confirm the given equilibrium concentration of H⁺ ions

from the table here, we can see that the equilibrium concentration of H⁺ ions is 0.200α, we know that α = 0.094

[H⁺] = 0.200α = 0.200 * 0.094 = 0.0188 M

which means that we're on the right track

We're basically scientists at this point (finding the dissociation constant):

Acid dissociation is nothing but the equilibrium constant, but for the dissociation of Acids

From the reaction above, we can write the equation of the acid dissociation constant:

Ka = [H⁺][A⁻] / [HA]

now, let's take the values from the 'equilibrium' row of the ice box the plug those in this equation

Ka = (0.200α)(0.200α) / [0.200(1-α)]

Ka = (0.200α)²/[0.200(1-α)]

plugging the value of α

Ka = (0.200*0.094)² / [0.200(0.906)]

Ka = (0.0188)² / 0.1812

Ka = 1.95 * 10⁻³

Answer:

approximately 15.1 grams.

Explanation:

The key to chemistry is to change everything to moles. Then when you have the answer in moles change the answer back to grams, liters, or whatever you want.

change 25 grams of potassium chlorate to moles.

calculate the gram molecular mass of potassium chlorate.

Chlorate is Cl with 3 oxygens. ate = saturated. Chlorine has seven valance electrons when it is saturated six of these electrons are used by oxygen ( 2 electrons per oxygen) leaving only 1 electron.

1 K x 39 grams/mole

+1 Cl x 35.4 grams/ mole

+3 O x 16 grams/ mole

= 122.4 grams / mole Potassium Chlorate

25

122.4

= moles.

2.05 moles of Potassium Chlorate.

There is a 1:1 mole ratio. 1 mole of Potassium Chlorate will produce 1 mole of Potassium Chloride.

2.05 moles of Potassium Chlorate will produce 2.05 moles of Potassium Chloride.

Find the gram molecular mass of Potassium Chloride.

1 K x 39 = 39

+1 Cl x 35.4 = 35.4

= 74.4 grams / mole.

2.05 moles x 74.4 grams/ mole = 15.2 grams

Answer:

idont know nalimotan ko hhhh...

Answer:

Evaporation

Explanation:

Water in the ocean, rivers, lakes, etc. is part of the hydrosphere, and when that water evaporates it enters the atmosphere

Answer:

4.42 x 10^24

Explanation:

The question is incomplete. The complete question is :

C. Balance these fossil-fuel combustion reactions. (1 point)

C8H18(g) + 12.5O2(g) →    ____CO2(g) + 9H2O(g) + heat

CH4(g) + ____O2(g) →     ____CO2(g) + ____H2O(g) + heat

C3H8(g) + ____O2(g) →    ____CO2(g) + ____H2O(g) + heat

C6H6(g) + ____O2(g)  →   ____CO2(g) + ____H2O(g) + heat

Solution :

C8H18(g) + 12.5O2(g) →    __8__CO2(g) + 9H2O(g) + heat

When 1 part of octane reacts with 12.5 parts of oxygen, it gives 8 parts of carbon dioxide and 9 parts of water along with liberation of energy.

CH4(g) + __2__O2(g) →     __1__CO2(g) + __2__H2O(g) + heat

When 1 part of methane reacts with 2 parts of oxygen, it gives 1 part of carbon dioxide and 2 parts of water along with liberation of energy.

C3H8(g) + __5__O2(g) →    __3__CO2(g) + __4__H2O(g) + heat

When 1 part of propane reacts with 5 parts of oxygen, it gives 3 part of carbon dioxide and 4 parts of water along with liberation of energy.

C6H6(g) + __1/2__O2(g)  →   __6__CO2(g) + __3__H2O(g) + heat

When 1 part of propane reacts with 1/2 parts of oxygen, it gives 6 part of carbon dioxide and 3 parts of water along with liberation of energy.

Answer:

Five general properties of organic  compounds:

Answer:

When an acetic acid solution is titrated with sodium hydroxide, the slope of the titration curve (pH versus volume of NaOH added) increases when sodium hydroxide is first added. This change shows that acetic acid is being converted to sodium acetate.

Explanation:

ABOUT TITRATION - Titration is a chemical analysis method for determining the amount of a constituent in a sample by adding an exact known quantity of another substance to the measured sample with which the desired constituent reacts in a specific, known proportion. A burette, which is essentially a long, graduated measuring tube with a stopcock and a delivery tube at the bottom end, is used to gradually administer a standard solution of titrating reagent, or titrant.

It is feasible to identify a good visual color indicator for many titration processes that will signify the end point at, or very near to, the equivalence point.

Acid-base titrations, precipitation titrations, complex-formation titrations, and oxidation-reduction (redox) titrations are examples of such titrations, which are categorised according to the nature of the chemical reaction that occurs between the sample and the titrant.

Titrations of metal ions with the reagent disodium ethylenediaminetetraacetate are the most important titrations based on complex-formation processes (a salt of edetic acid, or EDTA).

Hence , the answer is that acetic acid is converted into sodium acetate.

Answer:

Yes.

Explanation:

Yes, I agree with Bryce and his lab partner because titration is completed when the solution changes its colour. Add chemical from the burette until the solution change its colour so then calculate the amount of chemical is used from the burette and the time at which the titration is completed. Always be careful for calculating the titration in order to get accurate data of the solution.

science is all about the nature.

it is the study of squaring knowledge

Answer:

Linear

Explanation:

Answer: water

For many centuries, it was considered that there were only three states of matter: solid, liquid and gas (the three that are present and stable in our world). And water is the substance that best represents them, because it is the only one that exists naturally in the three states.

Explanation: Matter can exist in one of three main states: solid, liquid, or gas.

Solid matter is composed of tightly packed particles. ...

Liquid matter is made of more loosely packed particles. ...

Gaseous matter is composed of particles packed so loosely that it has neither a defined shape nor a defined volume.

Answer:

Water is the only common substance that is naturally found as a solid, liquid or gas. Solids, liquids and gases are known as states of matter.

Feel free to mark it as brainliest :D

Ignore this part unless you want to understand out of your syllabus:

However, if you take into account the fifth state of matter, Bose-Einstein Condensate, which has been recently discovered, there is no substance as such.

Answer:

D. Cyclic alkane

Explanation: there is no double or triple bond

The type of molecule that is shown below in the picture is a cyclic alkane. The correct option is D.

This is the compound that contain hydrogen and carbon bond. They are mono cyclic saturated hydrocarbons.

These are the atoms that replace the hydrogen atom in an organic compound.

Thus, the correct option is D. Cyclic alkane.

Learn more about cyclic alkane

https://brainly.com/question/23802223

#SPJ2

Answer:

Chloroplast

Explanation:

Photosynthesis happens in chloroplast of plants. Mitochondira is where the cellular respiration happens.

Answer: 30.978

Explanation:

From the equation 2 moles of Fe will result in 3 moles copper

so .325 moles Fe will result in .4875 moles Cu

Cu weights 63.546 gm per mole

.4875 moles * 63.546 gm / mole = 30.978 gm of Cu

1. You didn't post the question to Number 1.

2.

10% means There's 10g in 100ml of this solution.

This is the weight/volume(w/v) expression of concentration.

So

We have Mass =10g

volume =100ml

Molarity = Moles of solute/volume of solution(in LITRES)

Moles=Mass/Molar mass

Molar mass of NaOH=40g/mol

Mole=10/40

=0.25mole

Volume =100ml =0.1Litres

MOLARITY=0.25/0.1 =

=2.5M

OPTION B.

3. NOTE: THE MOLARITY AND NORMALITY OF NAOH AND HCL ARE THE SAME(This doesn't happen for all compounds tho)

So We can take 2.5N(Normality) of NaOH to be 2.5M(Molarity) NaOH

I think you forgot to write the Normality of the second one. I'll take it to be 1N. Maybe you can then Input supposed value when you're solving on your own

So

1N HCl is same as 1M HCL

We were given their respective volumes

2.5M NaOH can also be written as 2.5mole/volume(in Liters)

The volume of NaOH =10ml or 0.01L

Moles = 2.5mole/L x 0.01L

You notice that Liters on top and bottom cancels out... leaving the moles

So

Mole=0.01x2.5 = 0.025moles of NaOH

we're gonna do the same for 1N HCl in 20ml(0.02L)

So

Mole = 1 x 0.02 =0.02moles

Total Mole = 0.02 + 0.025 =0.045moles

The Final Volume is 100ml as stated in the question. It was diluted to 100ml or 0.1L

So

Final Concentration In Molarity

= Total Moles/Volume in L

=0.045/0.1

=0.45M.

Answer:

NCl₃

Explanation:

From the question given above, the following data were obtained:

Mass of nitrogen (N) = 0.77 mg

Mass of chlorine (Cl) = 6.61 mg

Empirical formula =?

The empirical formula of the compound can be obtained as follow:

N = 0.77 mg

Cl = 6.61 mg

Divide by their molar mass

N = 0.77 / 14 = 0.055

Cl = 6.61 / 35.5 = 0.186

Divide by the smallest

N = 0.055 / 0.055 = 1

Cl = 0.186 /0.055 = 3

Therefore, the empirical formula of the compound is NCl₃