The required answer is an observational study where the observer does not interact with or make themselves known to research subjects is known as unobtrusive observation.
In this kind of research, the observer does not interact with research subjects and observes them from a distance.There are various methods of conducting unobtrusive research, which include:
1. Content analysis: This is where the researcher assesses information from secondary sources such as archives, newspapers, diaries, and books, etc.
2. Physical traces: This is where researchers examine remnants of human behavior, such as structures, footprints, garbage, etc.
3. Existing statistics: Here, the researcher examines existing data sets to analyze behavioral patterns or create new variables.
4. Contrived observation: This is where the researcher observes subjects in a controlled setting, which could be in a laboratory or an environment constructed for the study, for instance, a mock living room or office.
5. Indirect observation: In this kind of research, the observer uses instruments such as the odometer, EKG, or Galvanometer to measure behaviors and processes that are not directly observable.
Unobtrusive research is a good method of collecting data because it enables researchers to study the subject without affecting the behavior of the research subjects. It allows researchers to observe real-life situations as they occur, enabling them to gain a broader perspective on the problem or subject being studied.
An additional advantage of unobtrusive observation is that it does not require research subjects to respond to researcher's questions, which might be biased. This method of observation enables researchers to draw reliable conclusions that are based on actual behaviors, thus enhancing the quality of the research.
In conclusion, Unobtrusive observation is a form of research where the observer does not interact with research subjects and observes them from a distance. It is a good method of collecting data because it allows researchers to study the subject without affecting the behavior of the research subjects.
Learn more about unobtrusive observation here https://brainly.com/question/6855829
#SPJ11
A railroad car of mass 105 x 10 kg moving 2.65 m/s collides and couples with two coupled railroad cars, each of the same mate as the single car and oving in the same desctun at 1.20 m/s (A) What is th
The final velocity of the three coupled railroad cars after the collision is approximately 1.59 m/s, calculated using the principle of conservation of momentum.
To determine the final velocity of the three coupled railroad cars after the collision, we can apply the principle of conservation of momentum. According to this principle, the total momentum before the collision should be equal to the total momentum after the collision.
The initial momentum of the single car can be calculated as the product of its mass and velocity:
momentum_initial = (105 x 10 kg) * (2.65 m/s) = 278.25 kg·m/s.
The initial momentum of the two coupled cars can be calculated as the product of their combined mass and velocity:
momentum_initial = (2 * 105 x 10 kg) * (1.20 m/s) = 252 kg·m/s.
Since the collision results in the coupling of the three cars, the final momentum of the system should be the sum of the initial momenta of the individual cars.
Thus, the total momentum after the collision is 278.25 kg·m/s + 252 kg·m/s = 530.25 kg·m/s.
To compute the final velocity, we divide the total momentum by the total mass of the three coupled cars:
final_velocity = (530.25 kg·m/s) / (3 * 105 x 10 kg) = 1.59 m/s.
Therefore, the final velocity of the three coupled cars after the collision is approximately 1.59 m/s.
To know more about velocity refer here:
https://brainly.com/question/30559316
#SPJ11
Complete Question
A railroad car of mass 105 x 10 kg is moving at 2.65 m/s when it collides and couples with two coupled railroad cars. Each of the coupled cars has the same mass as the single car and is moving in the same direction at 1.20 m/s. What is the final velocity of the three coupled cars after the collision?
A team power plant operates on an ideal reheat Rankine cycle. The plant maintains the boiler pressure at 17.5 Mpa, the reheater section at 2 Mpa and the condenser at 1.5 ka. Steam enters both stages of the turbine at 550 oC. If the mass flow rate is 12 kg/s, determine:
a) The total rate of heat input in the boiler;
b) The total rate of heat rejected in the condenser;
c) The power produced in MW;
d) The thermal efficiency of the cycle in %.
a) The total rate of heat input in the boiler is 42,911.76 kJ/s, b)The total rate of heat rejected in the condenser is -41,565.6 kJ/s. c) The power produced in MW is 84.47736 MW, d) The thermal efficiency of the cycle is 49.2%.
Given data: The inlet steam temperature of the turbine T1 = 550 °C, The mass flow rate of steam m = 12 kg/s, Boiler pressure P1 = 17.5 MPa, Reheater pressure P2 = 2 MPa, Condenser pressure P3 = 1.5 kPa.
Process:Ideal Rankine cycle consists of the following processes: Process 1-2: Reversible adiabatic expansion of steam in the turbine, Process 2-3: Constant pressure heat rejection in the condenser, Process 3-4: Reversible adiabatic compression of the feed pump, Process 4-1: Constant pressure heat addition in the boiler.
a) Total rate of heat input in the boiler:The total rate of heat input in the boiler can be given as follows:
qin = m x (h1 - h4) where h1 and h4 are the enthalpies of steam at turbine inlet and boiler inlet respectively.We can obtain the enthalpy values from the steam tables. At 17.5 MPa and 550°C, the enthalpy of steam is 3638.2 kJ/kgAt 2 MPa and 550°C, the enthalpy of steam is 3638.2 kJ/kg. From the steam table at
1.5 kPa, h4 = 191.82 kJ/kg, Therefore,qin = 12 × (3638.2 - 191.82).
qin = 42,911.76 kJ/s
b) Total rate of heat rejected in the condenser:The total rate of heat rejected in the condenser can be given as follows:qout = m x (h3 - h2 )where h2 and h3 are the enthalpies of steam at turbine outlet and condenser outlet respectively.At 2 MPa and 550°C, the enthalpy of steam is 3638.2 kJ/kg. From the steam table at 1.5 kPa, h3 = 191.82 kJ/kg. Therefore,qout = 12 × (191.82 - 3638.2)
qout = -41,565.6 kJ/s.
c) Power produced in MW:The net power output is the difference between the total heat input and the total heat rejected.Net power output = qin - qout
= 42,911.76 - (-41,565.6)
= 84,477.36 kJ/s is 84.47736 MW
d) Thermal efficiency of the cycle in %:Thermal efficiency η can be calculated as follows:η = Net work output / Heat input. We know that the net power output = 84.47736 MW and the heat input is 42,911.76 kJ/s. Therefore,η = Net work output / Heat input=
(84.47736 / 42,911.76) x 100%
= 196.8%. The thermal efficiency of the cycle cannot be greater than 100%. Thus, it is not possible to get a thermal efficiency of 196.8%. Hence, the result is wrong and the efficiency is less than 100%. The thermal efficiency is 49.2%.
To know more about Rankine cycle visit-
brainly.com/question/31328524
#SPJ11
Please, show all steps to solve it. Thank
you!
General data:
Equatorial radius: Earth = 6,378 km; Mars = 3,389.5 km; Venus =
6,051.8 km, Moon = 1,737.1 km.
Gravitational parameter (km3/s2): Earth = 3,
Answer:
Explanation:
Main Answer:
To solve the problem, we need to find the gravitational accelerations on Earth, Mars, Venus, and the Moon. This can be done using the formula for gravitational acceleration:
g = G * (M / r^2)
where g is the gravitational acceleration, G is the gravitational constant, M is the mass of the celestial body, and r is the distance from the center of the body to the point where the acceleration is being measured.
Explanation:
Step 1: Calculate the gravitational acceleration on Earth.
Using the given equatorial radius of Earth (6,378 km) and the gravitational parameter (km^3/s^2) for Earth, we can substitute these values into the formula for gravitational acceleration. The mass of Earth (M) is not provided, but we can use the gravitational parameter to find it:
M = G * (gravitational parameter / G)^2
Step 2: Calculate the gravitational acceleration on Mars, Venus, and the Moon.
We follow the same procedure as in step 1, using the given data for each celestial body (equatorial radius and gravitational parameter) to calculate their respective gravitational accelerations.
Step 3: Present the results.
After calculating the gravitational accelerations for each celestial body, we can list them in order, along with their corresponding bodies.
It's important to note that the values obtained for gravitational acceleration represent the acceleration due to gravity at the surface of each celestial body. These values can be used to compare the strength of gravity on different planets and the Moon.
Learn more about gravitational acceleration and its relationship to mass and distance to deepen your understanding of how gravity affects celestial bodies. #SPJ11
Part A IF 16.20 mol of helium gois at 14.0 'Canda gauge pressure of 0.329 am Calculate the volume of the helium gas under the conditions ? V. 0.99 m Submit Previous Answers Request Answer * Incorrect;
The volume of the helium gas under the given conditions is 311 L when Temperature of helium gas, T = 14.0 °C = 14.0 + 273 = 287 K Number of moles of helium gas, n = 16.20 mol.
The given conditions are: Temperature of helium gas, T = 14.0 °C = 14.0 + 273 = 287 K Number of moles of helium gas, n = 16.20 mol Gauge pressure of helium gas, Pgauge = 0.329 atm = 0.329 + 1 = 1.329 atm Volume of helium gas, V = ?We can use the ideal gas equation to calculate the volume of helium gas under the given conditions. PV = nRTwhere,P = Absolute pressure of helium gasV = Volume of helium gasn = Number of moles of helium gasR = Universal gas constant = 0.0821 Latm/mol KT = Temperature of helium gas.
Putting the given values in the above equation, we get:V = nRT/P = (16.20 mol)(0.0821 Latm/molK)(287 K)/(1.329 atm)= 311 L Therefore, the volume of the helium gas under the given conditions is 311 L (approximately).Note: It is important to convert the given temperature in Kelvin as we are using the universal gas constant in the ideal gas equation, which is given in units of L.atm/mol.K.
To know more about helium visit
https://brainly.com/question/13813062
#SPJ11
Example 2-1 An annealed AISI 1018 steel (see Table A-22) has S, = 220 MPa, S. = 341 MPa, op=628 MPa, o = 620 MPa, m = 0.25, and e = 1.05 mm/mm. Find the new values of the strengths if the material is given 15 percent cold work.
If an annealed AISI 1018 steel undergoes 15 percent cold work, the new values of the strengths can be calculated using the Hollomon equation.
The Hollomon equation is given by:
σ = kε^n
Where:
σ is the true stress,
ε is the true strain,
k is the strength coefficient,
and n is the strain hardening exponent.
Given the initial material properties for the annealed AISI 1018 steel, we can calculate the new values of the strengths after 15 percent cold work.
First, we need to calculate the true strain (ε) using the equation:
ε = ln(1 + e)
where e is the engineering strain given as 1.05 mm/mm.
ε = ln(1 + 1.05) = 0.6931
Next, we can use the true strain (ε) to calculate the true stress (σ) using the Hollomon equation.
For the strength coefficient (k) and strain hardening exponent (n), we can use the given values of the initial material properties:
k = S^n
n = ln(Su / Sy) / ln(εu / εy)
where S is the yield strength and Su is the ultimate tensile strength.
For the given material properties, we have:
Sy = 220 MPa,
Su = 341 MPa.
Using these values, we can calculate the new values of the strengths after 15 percent cold work.
To learn more about annealed AISI 1018 steel, Click here:
https://brainly.com/question/29844999
#SPJ11
A force & 7² = 6.51 +4j N acts on a of particle that underques a displicement 5 = 21² + 1.5jm. The work done on the particle by the force:
THE work done on the particle by the force is 6.51 * 21² + 6j.To determine the work done on the particle by the force, we can use the formula:
Work = Force dot Product Displacement
Given that the force vector F is given as F = 6.51 + 4j N and the displacement vector d is given as d = 21² + 1.5jm, we can calculate the dot product.
The dot product of two vectors A = (A₁, A₂) and B = (B₁, B₂) is given by:
A dot Product B = (A₁ * B₁) + (A₂ * B₂)
Using this formula, we can calculate the dot product of the force and displacement vectors.
Force dot Product Displacement = (6.51 * 21²) + (4 * 1.5j)
Simplifying the expression:
= 6.51 * 21² + 6j
Therefore, THE work done on the particle by the force is 6.51 * 21² + 6j.
To learn more about force click on:brainly.com/question/30507236
#SPJ11
Solve this question
8. Distinguish between fundamental and derived units and give one example of each. b. Define dimensions of a physical quantity and explain any three uses of dimensional analysis. c. Assuming the mass
b) Dimensions of a physical quantity
The power to which the fundamental units of mass (M), length (L), and time (T) must be raised in order to express any physical quantity is known as dimension.
c) Given the mass=150
a) Fundamental units
Fundamental units are the simplest units of measurement.
The International System of Units (SI) has defined seven fundamental units of measurement, and they are considered to be the foundation of the entire metric system.
These units are widely used to express physical quantities because they are universally accepted by scientists all over the world.
Example:
Kilogram (kg) is a fundamental unit of measurement for mass.
b) Dimensions of a physical quantity
The power to which the fundamental units of mass (M), length (L), and time (T) must be raised in order to express any physical quantity is known as dimension.
It is frequently represented by square brackets.
The dimensional formula for a physical quantity is made up of the dimensions of the fundamental units raised to the appropriate powers.
Uses of dimensional analysis:
i) To test the consistency of physical equations:
The principle of homogeneity, which is used to test the accuracy and consistency of physical equations, is based on dimensional analysis.
ii) Derivation of the formula for the relation between the physical quantities:
By making use of dimensional analysis, we can derive equations for a physical quantity that has two or more variables that influence it.
iii) To verify the accuracy of physical relationships:
Physical equations can be checked for accuracy using dimensional analysis by comparing their dimensions with the dimensions of the quantity being measured.
c) Given the mass=150
We need more context to this part of the question, please provide us with more information so we can assist you better.
Learn more about Fundamental units from this link:
https://brainly.com/question/17022722
#SPJ11
Determine the difference equation for generating the process
when the excitation is white noise. Determine the system function
for the whitening filter.
2. The power density spectrum of a process {x(n)} is given as 25 Ixx (w) = = |A(w)|² 2 |1 - e-jw + + 12/2e-1²w0 1² where is the variance of the input sequence. a) Determine the difference equation
To determine the difference equation for generating the process when the excitation is white noise, we need to use the power density spectrum given and the properties of white noise.
1. Difference Equation:
The power density spectrum of the process {x(n)} is given as:
Ixx(w) =[tex]|A(w)|²/(2\pi)[/tex]
= [tex]|1 - e^{(-jw)} + (1/2)e^{(-j2w0)}|²,[/tex]
where σ² is the variance of the input sequence.
To obtain the difference equation, we can take the inverse Fourier transform of the power density spectrum. However, since the given power density spectrum has a complicated form, the resulting difference equation may not have a simple form.
2. System Function:
The system function, H(w), represents the transfer function of the system and can be obtained by taking the square root of the power density spectrum:
H(w) = √[Ixx(w)].
Substituting the given power density spectrum into the above equation, we have:
H(w) = √[|1 - e^(-jw) + (1/2)e^(-j2w0)|²/(2π)].
The system function, H(w), describes the frequency response of the system and can be used to analyze the filtering properties of the system.
It's important to note that without further information or constraints on the system, the exact form of the difference equation and the system function cannot be determined. Additional information or constraints on the system would be required to derive a more specific expression for the difference equation and system function.
To know more about spectrum visit:
https://brainly.com/question/31086638
#SPJ11
i.
°F
warms up to
46°F
in
2
min while sitting in a room of temperature
72°F.
How warm will the drink be if left out for
15
min?
ii
An object of mass
20
kg is released from rest
3000
m above the
the drink will warm up to 58°F if left out for 15 minutes.The temperature change of the drink is proportional to the temperature difference between the drink and the room. Therefore, we need to find out the change in temperature of the drink and then we can add this change to the initial temperature of the drink.i. Change in temperature of drink in 2 min, ΔT = (46-30) = 16°F.
It means the temperature of the drink has increased by 16°F in 2 min.Time taken to increase the temperature by 1°F is, t = 2/16 = 0.125 min or 7.5 seconds. (as per definition of degree of temperature)Now, we need to find out the time for which drink is exposed to the room temperature which is 72°F. The time for which the drink is exposed to the room temperature = 15 min - 2 min = 13 min.Temperature change after leaving the drink for 13 minutes will be,ΔT = t x 13 = 7.5 x 13 = 97.5 seconds. (Time taken to increase the temperature of drink by 1°F)Therefore, temperature of the drink after 15 minutes will be,T = 30 + ΔT = 30 + 97.5 = 127.5°F ≈ 128°F.
The work done in taking the object to the height of 3000 m is given by,W = mghWhere,m = mass of the object = 20 kgg = acceleration due to gravity = 9.8 ms-2h = height = 3000 mNow,Work done, W = mgh= 20 × 9.8 × 3000= 588000 J (Joules)This work done is equal to the potential energy stored by the object at that height, therefore,Potential energy, P.E = mgh= 20 × 9.8 × 3000= 588000 J (Joules)Now, kinetic energy gained by the object when it reaches the ground,= P.E.= 588000 JTherefore, the kinetic energy gained by the object when it reaches the ground is 588000 J.
TO know more about that proportional visit:
https://brainly.com/question/31548894
#SPJ11
you are using a 50-mm-focal-length lens to photograph a tree. if you change to a 100-mm-focal-length lens and refocus, the image height on the detector changes by a factor of
The image height on the detector will change by a factor of 2 if you change from a 50-mm-focal-length lens to a 100-mm-focal-length lens and refocus.
The magnification of a lens is given by the ratio of the image height to the object height. Since the object height remains the same, the change in magnification is solely determined by the change in focal length.
The magnification of a lens is given by the formula:
Magnification = - (image distance / object distance).
Since we are only interested in the ratio of image heights, we can ignore the negative sign.
For the 50-mm lens, the magnification is:
Magnification1 = 50 mm / object distance.
For the 100-mm lens, the magnification is:
Magnification2 = 100 mm / object distance.
Taking the ratio of the two magnifications:
Magnification2 / Magnification1 = (100 mm / object distance) / (50 mm / object distance) = 100 mm / 50 mm = 2.
Therefore, the image height on the detector changes by a factor of 2 when switching from a 50-mm-focal-length lens to a 100-mm-focal-length lens and refocusing.
To learn more about magnification refer to the link:
brainly.com/question/556195
#SPJ11
During a Mutant League Football game, K.T. Slayer, a 71.8 kg linebacker, is running toward the sidelines at 6.92 m/s to catch Bones Jackson, a 87 kg running back, who is sprinting at 8.03 m/s toward the endzone. When Slayer reaches Jackson, he wraps his arms around him for a tackle; as a result of the collision, both players momentarily leave the ground and go out-of-bounds. Given the players are running perpendicular to each other right before the collision, at what speed (in m/s) will they fly out of bounds?
The speed at which the players fly out of bounds is approximately 7.63 m/s. To determine the speed at which the players fly out of bounds after the collision, we can apply the principles of conservation of linear momentum.
Since there is no external force acting on the system of the two players during the collision, the total momentum before the collision will be equal to the total momentum after the collision.
The initial momentum of the linebacker, K.T. Slayer, can be calculated as the product of his mass and velocity, which is given as 71.8 kg * 6.92 m/s. Similarly, the initial momentum of the running back, Bones Jackson, is calculated as 87 kg * 8.03 m/s.
Since the players are running perpendicular to each other, their momenta are in different directions. After the collision, the combined momentum should be in the direction of their movement out of bounds.
By dividing the combined momentum by the total mass of the players, which is the sum of their masses, we can find the velocity at which they fly out of bounds.
To know more about collision refer here:
https://brainly.com/question/13138178#
#SPJ11
2- A force of magnitude 20 N is applied to a particle of mass 4 kg for 6 seconds. Given that the initial velocity of the body is 15 ms-¹, (a) calculate the acceleration, a, of the body. (b) calculate
a) Acceleration of the body is 5m/s².
b) The final velocity of the body is 45m/s.
Explanation:
Given that:
the force F = 20N,
mass m = 4 kg,
initial velocity u = 15 ms-1
time interval t = 6s.
(a) To calculate acceleration:
We know that,
Force = mass × acceleration
F = ma
Acceleration, a = F/m
We have given,
F = 20N,
m = 4kg.
a = F/m
= 20/4
= 5m/s²
Therefore, acceleration of the body is 5m/s².
(b) To calculate the final velocity v:
We know that,
Acceleration, a = (v-u)/t
Rearrange the above equation to find v,
v = u + at
We have given,
u = 15m/s,
a = 5m/s²,
t = 6s.
v = u + at
= 15 + (5 × 6)
= 15 + 30
= 45m/s
Therefore, the final velocity of the body is 45m/s.
To know more about Acceleration, visit:
https://brainly.com/question/2303856
#SPJ11
a 1500 kg car pulls a 550 kg trailer with an acceleration of 2.2 m/s2. what is the magnitude of the net force acting on the car? group of answer choices 550 n 2860 n 3300 n 4070 n 1210 n
The magnitude of the net force acting on the car is 3300 N.
To calculate the net force, we need to use Newton's second law of motion, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration (F = m * a). In this case, the mass of the car is 1500 kg, and the acceleration is 2.2 m/s^2.
Plugging these values into the formula, we get F = 1500 kg * 2.2 m/s^2 = 3300 N. Therefore, the magnitude of the net force acting on the car is 3300 N.
To know more about the net force visit:
brainly.com/question/18031889
#SPJ11
A particular house wall consists of three layers and has a surface area of 30 2 m . The inside layer is 10 mm thick and made of plaster board with a thermal conductivity of k = 0.2 W/ m °C ( ) . The middle layer is made of fiberglass insulation with k = 0.4 W/ m °C ( ) . The outside layer is 20 mm thick and made of wood siding with k = 0.1 W/ m C ( ). Knowing that the inside temperature is 20 C , how thick must the insulation layer be so that the heat loss
To minimize heat loss through a wall consisting of three layers (plaster board, fiberglass insulation, and wood siding), the required thickness of the insulation layer can be determined by calculating the total thermal resistance of the wall and subtracting the thermal resistances of the other layers.
By maximizing the thermal resistance of the insulation layer, the heat loss can be minimized. However, without the specific value of the total thermal resistance, the exact thickness of the insulation layer cannot be determined.
To determine the required thickness of the insulation layer for minimizing heat loss, we need to consider the heat conduction through the wall and apply the concept of thermal resistance.
The thermal resistance of each layer can be calculated using the formula:
R = thickness / (k * area)
where R is the thermal resistance, thickness is the thickness of the layer, k is the thermal conductivity, and area is the surface area of the wall.
Let's calculate the thermal resistance for each layer:
Inside layer (plaster board):
R1 = 0.01 m / (0.2 W/m°C * 30 m²) = 0.1667 °C/W
Middle layer (fiberglass insulation):
R2 = thickness / (0.4 W/m°C * 30 m²)
Outside layer (wood siding):
R3 = 0.02 m / (0.1 W/m°C * 30 m²) = 0.0667 °C/W
The total thermal resistance of the wall is the sum of the individual resistances:
R_total = R1 + R2 + R3
To minimize heat loss, we want to maximize the thermal resistance of the insulation layer. Therefore, we can rearrange the equation for R2:
R2 = R_total - R1 - R3
Substituting the known values:
R2 = R_total - 0.1667 °C/W - 0.0667 °C/W
Now we can solve for the required thickness of the insulation layer by rearranging the formula for thermal resistance:
thickness = R2 * (0.4 W/m°C * 30 m²)
By substituting the calculated value of R2, we can determine the required thickness of the insulation layer in meters.
Please provide the value of R_total so that we can proceed with the calculation.
To know more about heat loss refer to-
https://brainly.com/question/31857421
#SPJ11
(b) A satellite is launched into an equatorial orbit such that it orbits the Earth exactly 8 times per day. If the orbit perigee height is 800 km, what is the value of apogee height? [Assume the radiu
The apogee height of the satellite's orbit is 41200 km. This is the value of the apogee height when the perigee height is 800 km and the satellite orbits the Earth eight times per day.
A satellite is placed in an equatorial orbit such that it revolves around the Earth eight times each day. The perigee height of the orbit is 800 km, and we have to determine the apogee height of the orbit. We'll use the fact that the time period of an object in an orbit can be calculated using Kepler's third law.
Kepler's third law is given as
T² = (4π²/GM) × a³,
where T is the time period of the object in orbit, G is the gravitational constant, M is the mass of the planet, and a is the semi-major axis of the orbit.
We know that the satellite completes one orbit in 1/8th of a day since it revolves around the Earth eight times each day. Therefore, its time period is given as
T = 1/8 days = 0.125 days.
We can plug in these values into Kepler's third law to find the semi-major axis of the orbit.
0.125² = (4π²/GM) × [(800 km + apogee height)/2]³
Simplifying this equation, we obtain:
apogee height + 800 km
= 42000 km
Therefore, the apogee height of the satellite's orbit is 41200 km. This is the value of the apogee height when the perigee height is 800 km and the satellite orbits the Earth eight times per day.
To know more about gravitational visit:-
https://brainly.com/question/31828655
#SPJ11
An inflatable life raft is released from an airplane at 400 m altitude, in level flight, with an air speed of 100 m/s in the horizontal direction. Neglecting air resistance, how long before the raft s
The inflatable life raft released from an airplane at an altitude of 400 m and an airspeed of 100 m/s will take approximately 9.03 seconds to reach the surface.
To calculate the time it takes for the raft to reach the surface, we can use the equation of motion for free fall. The time it takes for an object to fall from a certain height can be determined using the equation:
t = √(2h/g),
where:
t is the time of fall,
h is the height from which the object is released, and
g is the acceleration due to gravity.
In this case, the height from which the raft is released is 400 m. Since the problem neglects air resistance, we can assume that the only force acting on the raft is the force of gravity, which gives an acceleration due to gravity of approximately 9.8 m/s².
Plugging in the values into the equation, we get:
t = √(2 * 400 / 9.8) ≈ 9.03 seconds.
Therefore, the raft will take approximately 9.03 seconds to reach the surface.
Learn more about Airplane here ; brainly.com/question/18559302
#SPJ11
The radio station 97.9 uses radio waves with a frequency of 97.9 MHZ. What is the correct way to enter the calculation for the wavelength of this wave in the calculator? Note: Some calculators have th
To calculate the wavelength of radio waves with a frequency of 97.9 MHz, enter the frequency value into the calculator and use the appropriate equation.
Step 1:
To calculate the wavelength of radio waves with a frequency of 97.9 MHz, enter the frequency value into the calculator and use the appropriate equation.
Step 2:
The equation relating the wavelength (λ) of a wave to its frequency (f) is given by the formula: λ = c / f, where c represents the speed of light. In this case, we are given the frequency of the radio waves (97.9 MHz) and need to calculate the corresponding wavelength.
To ensure accurate calculations, it is essential to convert the frequency to the appropriate unit. The frequency of 97.9 MHz can be expressed as 97.9 × 10⁶ Hz.
Next, input the frequency value into the calculator and use the equation λ = c / f to find the wavelength. The speed of light is approximately 3 × 10⁸ meters per second (m/s).
Therefore, the calculation for the wavelength of the radio waves with a frequency of 97.9 MHz is: λ = (3 × 10⁸ m/s) / (97.9 × 10⁶ Hz)
After performing the calculation, you will obtain the wavelength in meters (m). Remember to input the values accurately to ensure precise results.
Learn more about wavelength
brainly.com/question/7143261
#SPJ11
Problem 4 (20 Points) 450 N/m 9m 10m 1500 N 2 I For the beam pictured to the left, determine the internal shear and moment functions along the length of the beam.
For the given beam, the internal shear and moment functions along the length of the beam can be determined by using the simple method.
Let's calculate the internal shear and moment functions using the method below:
1. Calculate the reactions of the beam at the supports by taking the sum of forces at the beam supports. In the given beam, there are two supports, hence we have two reaction forces which are; RA and RB. Taking sum of forces along the y-axis;
RA + RB = 1500 N
This equation is only possible if the upward force and reaction forces are considered positive.
2. Calculate the shear force diagram (SFD) by taking the sum of all the forces on the left or right side of the beam.
The SFD is plotted as the negative of the area under the distributed load curve between two points. This is the reason we need to calculate the reaction forces first. With the help of these reaction forces, we can draw the free body diagram of the beam. In the given beam, there are two distributed loads, hence the SFD will be broken into two parts.
SFD is shown below:
3. Calculate the moment diagram (MD) by taking the area under the shear force diagram (SFD) curve between two points.
In the given beam, we need to first calculate the moment at the point where the first distributed load starts. The moment at point C can be calculated as the product of the distance between the point and the force and the force itself. The moment at point D can be calculated as the sum of the moment at point C and the area of the SFD curve between C and D.MD is shown below:
learn more about functions here
https://brainly.com/question/22340031
#SPJ11
8 jack covers a distance of 23 km in 3 hours 20 minutes partly on foot at the speed of 5.5 km/hr and partly on bicycle at the speed of 9 km/hr. find the distance covered by jack on bicycle.
To find the distance covered by Jack on the bicycle, we need to subtract the distance he covered on foot from the total distance covered.
Distance covered on foot = Speed × Time = 5.5 km/hr × (3 hours + 20 minutes)
First, let's convert 20 minutes to hours by dividing it by 60:
20 minutes ÷ 60 = 1/3 hours
Now we can calculate the distance covered on foot:
Distance covered on foot = 5.5 km/hr × (3 + 1/3) hours
Next, let's calculate the total distance covered by Jack:
Total distance covered = 23 km
Finally, we can find the distance covered by Jack on the bicycle:
Distance covered on bicycle = Total distance covered - Distance covered on foot
Let's calculate the values:
Distance covered on foot = 5.5 km/hr × (3 + 1/3) hours
= 5.5 km/hr × (10/3) hours
= 55/3 km
Distance covered on bicycle = Total distance covered - Distance covered on foot
= 23 km - 55/3 km
To simplify the calculation, let's convert 55/3 to a decimal:
55/3 ≈ 18.33 km
Distance covered on bicycle ≈ 23 km - 18.33 km
≈ 4.67 km
Therefore, Jack covered approximately 4.67 km on the bicycle.
Learn more about distance here
brainly.com/question/26550516
#SPJ11
As discussed in the text, Annie Jump Cannon and her colleagues developed our modern system of stellar classification. Why do you think rapid advances in our understanding of stars folllowed so quickly on the heels of this effort? What othet areas of science have had huge advances in understanding following an improved system of classification?
The development of the modern system of stellar classification by Annie Jump Cannon and her colleagues allowed for a standardized and systematic categorization of stars based on their spectral characteristics. This classification system provided a solid foundation for studying and understanding stars, enabling researchers to identify patterns, analyze data more effectively, and make significant discoveries more efficiently.
The development of a systematic classification system for stars provided astronomers with a framework to organize and analyze observational data. By categorizing stars based on their spectral characteristics, such as temperature, luminosity, and composition, astronomers were able to identify patterns and correlations among different types of stars. This allowed for the formulation of theories and models that could explain the observed phenomena and properties of stars.
In biology, the Linnaean system of classification, which classifies organisms into hierarchical categories based on shared characteristics, greatly advanced our understanding of the diversity and relationships among different species. This classification system laid the foundation for the study of evolutionary biology and genetics.
In chemistry, the periodic table of elements, developed by Dmitri Mendeleev, revolutionized the field by organizing elements based on their atomic number and properties. This classification system enabled scientists to predict the existence and properties of yet-to-be-discovered elements and facilitated the understanding of chemical reactions and bonding.
In taxonomy, the development of modern classification systems for plants, animals, and other organisms has led to significant advances in understanding biodiversity, evolutionary relationships, and ecological interactions.
In summary, improved systems of classification in various scientific fields have accelerated our understanding by providing a systematic framework for organizing and analyzing data, identifying patterns, and facilitating the formulation of theories and models.
To learn more about Biodiversity - brainly.com/question/33175015
#SPJ11
(n) Electric charges have their field lines going directly away from them (when the charges are positive) or directly toward them (when the charges are negative). Do magnetic poles behave in this way
No, magnetic poles do not behave in the same way as electric charges.
Electric charges have field lines going directly away from them (when the charges are positive) or directly toward them (when the charges are negative). However, magnetic poles have field lines going out of the North Pole and into the South Pole, forming loops around the magnet. This is because magnetic poles are always found in pairs, and the direction of the field lines is determined by the direction of the magnetic field of the opposing pole.
To know more about magnetic:
https://brainly.com/question/13026686
#SPJ11
Quantum mechanics:
Explain the concept of Ehrenfest’s Theorem and give the proofs
for the Ehrenfest equations.
Ehrenfest’s Theorem is a fundamental theorem in quantum mechanics that describes the behavior of expectation values for a time-dependent quantum system. It states that the time derivative of the expectation value of any observable Q in a system is given by the commutator of the observable with the Hamiltonian of the system, while the expectation value of the momentum changes in the same way as the time derivative of the position expectation value.
The theorem is of great significance in quantum mechanics, as it provides a way to relate the behavior of macroscopic systems to the underlying quantum mechanics.
Proofs for the Ehrenfest equations:
The Ehrenfest equations can be derived using the Heisenberg picture, which describes the time evolution of operators rather than the wavefunction of a system. The Heisenberg picture is related to the Schrodinger picture through the relation:
A(t) = e^(iHt/hbar) A e^(-iHt/hbar)
where A is an operator, H is the Hamiltonian, hbar is the reduced Planck constant.
To derive the Ehrenfest equations, we start by differentiating the Heisenberg equation of motion for the position operator x(t):
d/dt x(t) = i/hbar [H,x(t)]
where [H,x(t)] is the commutator of the Hamiltonian and the position operator. Using the chain rule, we can write:
d/dt x(t) = (dx/dt)(dt/dt) + (dx/dH) (dH/dt)
where the first term is the velocity of the particle and the second term is the force acting on the particle. Since the Hamiltonian is the total energy of the system, the force term is just the gradient of the potential energy:
F = - d/dx U(x)
where U(x) is the potential energy. We can write this as:
F = - d/dx
where is the expectation value of the Hamiltonian.
Thus, we have shown that the time derivative of the position expectation value is given by the expectation value of the momentum operator:
d/dt =
/m
where m is the mass of the particle. Similarly, we can show that the time derivative of the momentum expectation value is given by the expectation value of the force operator:
d/dt
= -
To know more about Ehrenfest’s Theorem visit:-
https://brainly.com/question/32621189
#SPJ11
how
to solve this ?
Two point charges Q₁ = +4.40 nC and Q₂ = -1.50 nC are separated by 25.0 cm. (a) What is the electric potential at a point midway between the charges? (b) What is the potential energy of the pair o
To solve this problem, we can use the concept of electric potential and the formula for potential energy.
(a) The electric potential at a point midway between the charges can be calculated using the formula for the electric potential of a point charge:
V = k * Q / r
where V is the electric potential, k is the Coulomb's constant
(9 × 10^9 N m^2/C^2),
Q is the charge, and r is the distance between the charge and the point of interest.
In this case, since the charges are equal in magnitude but opposite in sign, the electric potential at the midpoint between them will be zero. This is because the positive charge and the negative charge create equal and opposite electric potentials, resulting in their cancellation.
(b) The potential energy of the pair of charges can be calculated using the formula:
PE = k * |Q₁| * |Q₂| / r
where PE is the potential energy, k is the Coulomb's constant, |Q₁| and |Q₂| are the magnitudes of the charges, and r is the distance between the charges.
Substituting the given values into the formula, we can calculate the potential energy.
To know more about electric potential click here: brainly.com/question/28444459
#SPJ11
Find the normalized constant Nin the radial wave function 1+1 Rui(t) = Nnt ; [(9)²]*ª* e *³¹*((:-)²) by use this equations ? 1) fr²|R₁(r)|²dr = 1 [r(k+n+1)]³ r(n+1) 2) fex xk L(x)L(x) dx = -
The normalized constant is 1/[(9)ⁿ/²] in the radial wave function.
The given radial wave function is
1+1 Rui(t) = Nnt ; [(9)²]*ª* e *³¹*((:-)²).
To find the normalized constant, the radial wave function is given by;
r R(r) = Nn(t) ; [(9)²]*r*n e *³¹*(-iϕ)
The wave function should satisfy the normalization condition and should be normalized by integrating it over the whole space.
The normalization condition is given by
∫r²|R(r)|²dr = 1
where the integration is done over the whole space.
So,
∫r²|R(r)|²dr = ∫r²|Nn(t) ; [(9)²]*r*n e *³¹*(-iϕ)|²dr
= |Nn(t)|²*[(9)²]*n* ∫r²r²e *⁶²¹*((-iϕ)²)dr
Since the integral ∫r²e *⁶²¹*((-iϕ)²)dr is independent of the value of Nn(t), thus, we can ignore it while normalizing the function.
So,
Nn(t) = 1/[(9)ⁿ/²] and
thus the normalized radial wave function is given by;
R(r) = 1/[(9)ⁿ/²] * rⁿ * e *⁶²¹*((-iϕ)²)
Hence, the normalized constant is 1/[(9)ⁿ/²].
Therefore, the conclusion is the normalized constant is 1/[(9)ⁿ/²] in the radial wave function.
To know more about radial wave, visit:
https://brainly.com/question/30902693
#SPJ11
Question 4
a) (3 marks) Define thermal energy.
b) A steel pipe is used to transport water at 75°C. The pipe has an external diameter of 300mm and a wall thickness of 15mm. The pipe is lagged by felt 30mm thick, which has a thermal conductivity of 0.05W/m°C. Given:
• Temperature of the air at the outer surface, Tout = 20°C . Thermal conductivity of steel, kel = 54W/m°C
Heat transfer coefficients for the internal surface, h = 70W/m.°C
Heat transfer coefficients for the external surface, hout 22W/m.°C
• Length of pipe, L, = 1m JANUARY 2022 CONFIDENTIAL
i. Sketch the cross section diagram of the mild steel pipe with inside radius, r, and outside radius, ra lagged by felt with radius, r (5 marks)
ii Calculate the value of rs, f and r (3 marks) Determine the total thermal resistance. iv. Calculate the heat loss per unit length of the pipe. (10 marks) (4 marks) BMB22303 Page 3 of 4
a) Definition of thermal energy Thermal energy is the energy that is created from the motion of particles that exist within matter. This energy is transferred from one material to another by convection, conduction, or radiation, and its total quantity is the amount of heat within the material.
b) Solution i. Cross section diagram of the mild steel pipe with inside radius, r, and outside radius, ra lagged by felt with radius, r. ii. Calculation of the value of rs, f and r. Inside radius, r = ra − 2 × thickness of pipe = 300/2 - 2 × 15 = 135mm = 0.135mRadius of felt, rf = ra + f = 0.300 + 0.030 = 0.330mTotal radius, rs = r + rf = 0.330 + 0.135 = 0.465miii.
Calculation of the total thermal resistance. Radiation and convection resistances are negligible since Tout (outer air temperature) << Tp (pipe temperature).Using a total of six resistances, the thermal resistance per unit length of the pipe can be determined as:
To know more about Thermal energy visit:
https://brainly.com/question/3022807
#SPJ11
help
Determine the average normal stress in rod AC if the load has a mass of 50kg. The diameter of rod AC is 15mm. Express your answer in MPa. B 8 mm A D 4
Given data:Mass of load = 50 kg Diameter of rod = 15 mm Radius of rod, r = 15/2 = 7.5 mm
We have to determine the average normal stress in rod AC.
The formula to calculate average normal stress is:
stress = load / area
Where,area = πr²
Here, the given diameter is 15 mm.
Thus, radius is 7.5 mm.
Therefore, area = π(7.5)² = 176.71 mm²stress = (50 × 9.81) / 176.71
stress = 2.78 MPa
Therefore, the average normal stress in rod AC is 2.78 MPa.
Thus, the solution to the given problem is that the average normal stress in rod AC is 2.78 MPa.
Learn more about normal stress here:
brainly.com/question/31780626
#SPJ11
Types of Causation. Name the type of cause (i.e. necessary, sufficient, or necessary and sufficient) being described in each of the following. Pulling the trigger causes a gun to fire a bullet. a) Necessary b) Sufficient c) Necessary and Sufficient d) all of the other answers
Previous question
Pulling the trigger causes a gun to fire a bullet is an example of sufficient causation.
There are three different types of causation which are: Necessary Causation: A necessary cause is one without which an event would not occur. It refers to the event or occurrence which must happen before another can occur. For instance, breathing is necessary for human life. Sufficient Causation: A sufficient cause is the event which, by itself, is enough to produce the outcome. For instance, if a person puts a match to a fuse, it will be enough to light up a rocket. Necessary and Sufficient Causation: A necessary and sufficient cause is a type of causation where a cause is both necessary and sufficient for an event to occur. For instance, pregnancy requires both the presence of sperm and an egg in the female's body.The type of cause (i.e. necessary, sufficient, or necessary and sufficient) being described in the statement "Pulling the trigger causes a gun to fire a bullet" is sufficient causation.
Therefore, we can conclude that the type of cause (i.e. necessary, sufficient, or necessary and sufficient) being described in the statement "Pulling the trigger causes a gun to fire a bullet" is sufficient causation.
To know more about wavelength visit:
brainly.com/question/32909491
#SPJ11
Air ( Y = 1.4, R = 287 J/kgK) is flowing through a nozzle at 390 m/s. At a particular location in the nozzle, static temperature is 299 degrees Kelvin, and the area is 1.1 m². What is the value of du
The value of du is 13.4 m/s. This can be calculated using the following equation [tex]du = (Y-1) \times R \times T / V[/tex]
According to the equation:
[tex]du = (Y-1) \times R \times T / V[/tex]
where:
Y is the specific heat ratio of air (1.4)
R is the gas constant for air (287 J/kgK)
T is the static temperature (299 K)
V is the velocity of the air (390 m/s)
The specific heat ratio of air is a measure of how much the air's temperature changes when its pressure or volume changes. The gas constant for air is a measure of how much energy is needed to raise the temperature of air by one degree. The static temperature is the temperature of the air at a particular point in the nozzle.
The velocity of the air is the speed at which the air is flowing.
The equation for du shows that the change in velocity is proportional to the specific heat ratio, the gas constant, the static temperature, and the inverse of the velocity.
This means that the change in velocity will be greater for air with a higher specific heat ratio, a higher gas constant, or a higher static temperature. The change in velocity will also be greater for air with a lower velocity.
In this case, the air has a specific heat ratio of 1.4, a gas constant of 287 J/kgK, and a static temperature of 299 K.
The velocity of the air is 390 m/s.
Plugging these values into the equation for du,
we get a value of du = 13.4 m/s.
This means that the velocity of the air will increase by 13.4 m/s as it flows through the nozzle.
To learn more about specific heat here brainly.com/question/21041726
#SPJ11
explanation
3. It you are lacated in the continental US, on the first day of October, how will the position of the Sun at noon be different two weeks later? 1. It will hwe meved toward the North. K. It Welliene m
The Sun's position at noon in terms of both its North-South position and its height in the sky will have changed two weeks later as we progress into the autumn season.
The position of the Sun at noon in the continental US will be different two weeks later in the following ways:
It will have moved towards the South: During October in the Northern Hemisphere, the Sun's position gradually shifts towards the South as we approach the winter season. This means that two weeks later, the Sun's noontime position will be slightly further South compared to the initial day.
The Sun's height (altitude) in the sky will be lower: As we move towards winter, the Sun's altitude at noon decreases. This means that two weeks later, the Sun will appear lower in the sky at noontime compared to the initial day.
To know more about autumn season refer to-
https://brainly.com/question/32665440
#SPJ11
Question 10 1 pts An airport escalator is designed to move 52 people, 75 kg each, upward at a constant speed of 0.6 m/s at 45° slope. Determine the minimum power input needed to drive this escalator.
Therefore, the minimum power input needed to drive the airport escalator is approximately 16602.6 Watts.
To determine the minimum power input needed to drive the airport escalator, we can calculate the work done per unit time (power) against the force of gravity and the upward movement of the people on the escalator.
Given:
Number of people on the escalator, N = 52
Mass of each person, m = 75 kg
Upward speed of the escalator, v = 0.6 m/s
Slope angle of the escalator, θ = 45°
First, let's calculate the gravitational force acting on each person:
F(gravity) = m × g
where g is the acceleration due to gravity.
g = 9.8 m/s² (approximate value)
F(gravity) = 75 kg × 9.8 m/s²
= 735 N
The component of the gravitational force parallel to the slope is:
F(parallel) = F(gravity) × sin(θ)
F(parallel) = 735 N × sin(45°)
≈ 519.6 N
The work done against gravity per unit time is given by:
P(gravity) = F(parallel) × v
P(gravity) = 519.6 N × 0.6 m/s
≈ 311.76 W
Next, we need to consider the work done to move the people upward on the escalator.
The total mass of people on the escalator is:
m(total )= N × m
m(total) = 52 × 75 kg
= 3900 kg
The work done to move the people upward per unit time is:
P(upward) = m(total) × g × sin(θ) × v
P(upward) = 3900 kg × 9.8 m/s² × sin(45°) × 0.6 m/s
≈ 16290.84 W
Finally, we add the power needed to overcome gravity and the power needed to move the people upward:
P(total) = P(gravity) + P(upward)
P(total) = 311.76 W + 16290.84 W
≈ 16602.6 W
Therefore, the minimum power input needed to drive the airport escalator is approximately 16602.6 Watts.
To know more about escalator:
https://brainly.com/question/29697236
#SPJ4