Answer:
The answer is "Choice a".
Explanation:
In the given question, through the basis of their determined percentage yield, a smaller copper increase in value and less copper has been lost during decanting, but now this mistake in your experiment was the cause of confusion, and the wrong choice can be defined as follows:
In point b, it is wrong because A few other solids were not lost during decanting, resulting in a higher recovery of copper as well as a boost in the percentage yieldIn point c, it is wrong because whenever the vapor bath was dried, the specimen did run dry totally, which did result in such a heavier density of copper and a larger percentage of the yield.In point d, it is wrong because whenever the vapor bath was dried, the sample was fully dried, which also resulted in much less adhesive weight and a much less percentage of the yield.Determine the molecular formula for a compound that has a molecular mass of 52.0 g/mole
and and is composed of 92.31% carbon and 7.69% hydrogen.
Answer:
C4H4
Explanation:
92.31% of 52.0 g/mol is 48.0012 g/mol
7.69% of 52.0 g/mol is is 3.9988 g/mol
Carbon has a gram-formula mass of about 12, which goes into 48.0012 about 4 times, so there should be 4 atoms of Carbon
Hydrogen has a gram-formula mass of about 1, which goes into 3.9988 about 4 times, so there should also be 4 atoms of hydrogen
According to this video, how do scientists use data to study/monitor earthquakes and tsunamis?
Answer:
ewan ko po
Explanation:
sana makatulong
What is delta Gº for the following reaction at 25 °C?
CO(g) + 2 H2(g) = CH OH(9)
Ky = 2.1 x 10-4
Answer:
21 kJ/mol
Explanation:
Step 1: Given and required data
Temperature (T): 25 °C (298 K)Equilibrium constant (Kc): 2.1 × 10⁻⁴Ideal gas constant (R): 8.314 J/K.molStep 2: Write the balanced equation at equilibrium
CO(g) + 2 H₂(g) ⇄ CH₃OH(g)
Step 3: Calculate the standard Gibbs free energy of the reaction (ΔG°)
We will use the following expression.
ΔG° = - R × T × ln Kc
ΔG° = - (8.314 J/K.mol) × 298 K × ln 2.1 × 10⁻⁴ = 2.1 × 10⁴ J/mol = 21 kJ/mol
Please help :) hope you have a good day
Have a wonderful day :) thanks for the points
Which of these statements is false?
A. All matter is made up of atoms.
B. Atoms are made up of protons,
neutrons, and electrons.
C. Atoms contain chemical bonds.
D. Atoms are the smallest particles of
elements.
Answer:
C is the false one atoms contain chemical bonds
Answer:
C. Atoms contain chemical bonds.
Reason:
Atoms don't have any chemical bonds. Molecules are the particles have chemical bonds.
Which of the following particles has the smallest
mass?
A) electron
C) neutron
B) hydrogen atom
D) proton
Answer:
AN ELECTRON HAS THE SMALLEST MASS!
Answer:
A) electron
good luck, i hope this helps :)
b. If you have 50 grams of Molybdenum-99, how many grams will remain
after 11 days?
Answer:
6.25gm
half life is 66hrs 11 days is 24*11 then take that and divide by 66 to find out how many time it will have halved and half 50 by that many times
Explanation:
If you have 50 grams of Molybdenum-99, after 11 days, 2.7 g will remain.
Molybdenum-99 follows first-order decay.
What is first-order decay?First-order decay means that for a population of atoms (e.g. radioactive), molecules, or anything else, a constant fraction/unit time is converted to something else.
The half-life (th) of Mo-99 is 66 h.
We will find its rate constant (k) using the following expression.
k = ln2 / th = ln2 / 66 h = 0.011 h⁻¹
Next, we will convert 11 days to hours, knowing that 1 day = 24 h.
11 d × 24 h/1 d = 264 h
If we start with 50 g of Mo-99, we can calculate the remaining mass after 264 h using the following expression.
[tex][Mo] = [Mo]_0 \times e ^{-k \times t} }\\\\[Mo] = 50g \times e ^{-0.011 h^{-1} \times 264 h} } = 2.7 g[/tex]
where,
[Mo] is the final amount of Mo-99.[Mo]₀ is the initial amount of Mo-99.t is the elapsed time.If you have 50 grams of Molybdenum-99, after 11 days, 2.7 g will remain.
Learn more about first-order decay here: https://brainly.com/question/14478152
After adding 20.0 mL of 5% NaOH solution into the remaining organic layer, followed by mixing and venting, the solution separated into two distinct layers. Match the following: Group of answer choices The top layer was the ______________ layer. [ Choose ] 9-fluorenone was most soluble in the ____________ layer. [ Choose ] deprotonated chloroanilic acid was most soluble in the _____________ layer. [ Choose ] The bottom layer was the __________________ layer. [ Choose ] The organic layer was a ________________ colored solution. [ Choose ] The aqueous layer turned into a _____________ colored solution. [ Choose ]
Answer:
The top layer was the organic layer.
9-fluorenone was most soluble in the organic layer.
Deprotonated chloroanilic acid was most soluble in the aqueous layer.
The bottom layer was the aqueous layer.
The organic layer was a yellow colored solution.
The aqueous layer turned into a pink colored solution.
For the balanced equation shown below, what would be the limiting reagent if 42.3 grams
of N2O5 were reacted with 9.18 grams of H2O?
N2O5+H2O---> 2HNO3
A. HNO3
B. H20
C. N205
Answer: A. HNO3
Explanation:
K2HPO4 is a highly water-soluble salt. It can be used as a buffering agent, food additive, or
fertilizer. The neutralization of phosphoric acid with potassium hydroxide can be used to form
potassium hydrogen phosphate.
H3PO4 + 2KOH K2HPO4 + 2H2O
100 g of phosphoric acid (H3PO4) is reacted with excess potassium hydroxide. The final mass
of K2HPO4 produced is found to be 163 g.
What is the percent yield?
Answer:
91.7%
Explanation:
The percent yield when it could be used as a buffering agent should be considered as the 91.74%.
Calculation of the percent yield:Since we know that
Number of moles = Mass in gram / Molar mass
And,
Molar mass of H3PO4 = 97.994 g/mol
So,
Number of moles of H3PO4
= 100 g / 97.994 g/mol
= 1.02 mol
Now
Molar mass of K2HPO4 = 174.2 g/mol
So,
Theoretical yield of K2HPO4 = 174.2 g/mol * 1.02 mol
= 177.684 g
So finally
Percent yield = Actual yield * 100 / Theoretical yield
= 163 g * 100 / 177.684 g
= 91.74%
hence, The percent yield when it could be used as a buffering agent should be considered as the 91.74%.
learn more about percentage here: https://brainly.com/question/14849541
What mass of iron is produced from adding 80.0 g of iron(II) oxide (71.85 g/mol) to 20.0 g of magnesium metal? FeO (l) + Mg (l) ----------> Fe (l) + MgO (s) Identify the limiting reactant, mass of iron produced and the mass in grams of the excess reactant used in this reaction. Remember to report the correct number of significant figures and units where appropriate. You need to show work in order to receive credit. Zero points will be awarded if logical work/explanation is not given. You must show your work by typing it into the provided test box. I will not look to your scratch paper for work.
Answer:
46.0g of Iron are produced
Explanation:
Based on the chemical reaction:
FeO(l) + Mg(l) → Fe(l) + MgO(s)
1 mole of Iron (II) oxide reacts per mole of Mg to produce 1 mole of iron
To solve this question we need to convert each mass of reactant to moles using its respectives molar masses in order to find limitng reactant. Moles of limiting reactant = Moles of iron produced:
Moles FeO (Molar mass: 71.85g/mol):
80.0g * (1mol / 71.85g) = 1.11moles FeO
Moles Mg (Molar mass: 24.305g/mol)
20.0g * (1mol / 24.305g) = 0.823 moles Mg
As moles of Mg < Moles FeO, Mg is limiting reactant and the moles of Fe are 0.823 moles.
The mass of Iron produced is:
0.823 moles Fe * (55.845g/mol) =
46.0g of Iron are produced
Choose the combination of factors that creates fog. Record the description of the factors in the Student Guide,
Relative Humidity
Air Temperature
Air Pressure
Check
Pause
Answer:
Relative Humidity
Air Temperature
Explanation:
Relative humidity and air temperature are the factors that creates fog. When the moist and warm air makes contact with the cooler air, water vapor condenses due to low temperature of that region that causes for the formation of fog. So we can say that relative humidity and air temperature are the main factors for the formation of fog in that region.
Answer:
High Cold High
Explanation:
why is seawater a better conductor of electricity than freshwater?
Answer:
please refer to the attachment above;)
Answer:
Because it contains Na+ and Cl- ions, Which are conductors of electricity
Explanation:
help asap pls,
find the percent composition
Explanation:
1. Pb(CO3)2
Element Number Mass Percet Composition
Oxygen 6 16.00 29.34%
Carbon 2 12.01 7.34%
Lead 1 207.21 63.32%
2. Ga(OH)3
Element Number Mass Percet Composition
Hydrogen 3 1.0079 2.50%
Oxygen. 3 16.00 39.75%
Gallium 1 69.72 57.74%
3. P4O10
Element Number Mass Percet Composition
Oxygen. 10 16.00. 56.36%
Phosphorus. 4 30.97 43.64%
4. Ca3P2
Element Number Mass Percet Composition
Phosphorus 2 30.97 34.00%
Calcium. 3 40.08 66.00%
5. Ti(NO3)3
Element Number Mass Percet Composition
Oxygen. 9 16.00 61.56%
Titanium. 1 47.87 20.47%
Nitrogen. 3 14.01 17.97%
Which of the following has the strongest gravitational field?
A. the sun
B. the earth
C. a football player
D. a tree
Answer:
A
Explanation:
Answer:
the sun , option A hope it helps
What is an electrolytic cell?
Answer:
An electrolytic cell is a cell that converts electrical energy into chemical energy.
Any device in which electrical energy is converted to chemical energy or vice versa is referred to as an electrolytic cell. A typical cell consists of two metallic or electronic conductors held apart and in contact with an electrolyte, which is usually a dissolved or fused ionic compound.
What is an electrolytic cell ?An electrolytic cell is a type of electrochemical cell that uses an external source of electrical energy to force a chemical reaction that would not occur otherwise. A voltage applied between the cell's two electrodes, an anode and a cathode immersed in an electrolyte solution, serves as the external energy source.
Electrons in the form of an electric current are deliberately pumped through the chemicals in the section to induce an oxidation-reduction reaction. An electrolytic cell is a setup used to electrolytically decompose water into hydrogen and oxygen.
Electrochemical cells that generate an electric current are known as voltaic or galvanic cells, whereas those that generate chemical reactions, such as electrolysis, are known as electrolytic cells.
Thus, Any device in which electrical energy is converted to chemical energy or vice versa is referred to as an electrolytic cell.
To learn more about electrolytic cell, follow the link;
https://brainly.com/question/4030224
#SPJ5
compound composed of cations and anions the forces of attraction that bind oppositely charged ions together lowest whole-number ratio of ions in an ionic compound a depiction of the valence electrons as dots around the symbol for an element a mixture of two or more elements, at least one of which is a metal the attraction of the free-floating valence electrons for the positively charged metal ions ions of the halogen atoms the electron(s) in the highest occupied energy level of an atom the number of ions of opposite charge that surround each ion in a crystal Atoms in a compound tend to have the electron configuration of a noble gas. Shows the kinds and numbers of atoms in the smallest representative unit of a substance a. halide ions b. alloy c. octet rule d. formula unit e. electron dot structure f. ionic compound g. ionic bonds h. coordination number i. chemical formula j. valence electrons k. metallic bond
Answer:
compound composed of cations and anions the forces of attraction that bind oppositely charged ions together - ionic compound
lowest whole-number ratio of ions in an ionic compound - formula unit
a depiction of the valence electrons as dots around the symbol for an element - electron dot structure
a mixture of two or more elements, at least one of which is a metal - alloy
the attraction of the free-floating valence electrons for the positively charged metal - metallic bond
ions of the halogen atoms - halide ions
the electron(s) in the highest occupied energy level of an atom - valence electrons
the number of ions of opposite charge that surround each ion in a crystal - coordination number
Atoms in a compound tend to have the electron configuration of a noble gas - octet rule
Shows the kinds and numbers of atoms in the smallest representative unit - chemical formula
Explanation:
An ionic compound is composed of oppositely charged ions held together in a crystal lattice. The lowest whole-number ratio of ions in an ionic compound is known as the formula unit. The number of ions of opposite charge that surround each ion in a crystal is called the coordination number. Ions of the halogen atoms are negatively charged and are called halide ions
Elements are composed of atoms, the electron(s) in the highest occupied energy level of an atom are called valence electrons. In metals, the attraction of the free-floating valence electrons for the positively charged metal is called the metallic bond. For atoms of elements, a depiction of the valence electrons as dots around the symbol for an element is called the electron dot structure or Lewis structure.
A combination of elements may be a compound or an alloy. An alloy usually contains at least one metal. For compounds, the chemical formula Shows the kinds and numbers of atoms in the smallest representative unit. Atoms form compounds because atoms in a compound tend to have the electron configuration of a noble gas this is the octet rule.
The correct match of the given statement are 1 - f. ionic compound, 2- d. formula unit, 3 - e. electron dot structure, 4- b. alloy, 5- k. metallic bond, 6- a. halide ions, 7- j. valence electrons, 8- h. coordination number, 9 - c. octet rule, 10- i. chemical formula.
Ionic compounds are made up of oppositely charged ions that are kept together in a crystal lattice. The formula unit is the lowest whole-number ratio of ions in an ionic compound.
The coordination number is the number of ions with opposite charges that surround each ion in a crystal. Halide ions are halogen atom ions that are negatively charged.
Elements are made up of atoms, and the electron(s) in the atom's highest occupied energy level are known as valence electrons. The metallic bond refers to the attraction of free-floating valence electrons to positively charged metals in metals.
The electron dot structure or Lewis structure is a representation of the valence electrons as dots around the symbol for an element for atoms.
A compound or an alloy is a mixture of components. A metal is frequently present in an alloy.
The chemical formula is used for compounds. The types and numbers of atoms in the smallest representative unit are displayed.
The octet rule states that atoms in a compound tend to have the electron configuration of a noble gas.
Therefore, the correct matches are: 1 - f. ionic compound, 2- d. formula unit, 3 - e. electron dot structure, 4- b. alloy, 5- k. metallic bond, 6- a. halide ions, 7- j. valence electrons, 8- h. coordination number, 9 - c. octet rule, 10- i. chemical formula.
Learn more about ionic compound, here:
https://brainly.com/question/30420333
#SPJ6
The given question is incomplete, so the most probable complete question is,
Match the correct statement with their appropriate terms:
Compound composed of cations and anions, the forces of attraction that bind oppositely charged ions together.Lowest whole-number ratio of ions in an ionic compound.A depiction of the valence electrons as dots around the symbol for an element.A mixture of two or more elements, at least one of which is a metal.The attraction of the free-floating valence electrons for the positively charged metal.Ions of the halogen atoms.The electron(s) in the highest occupied energy level of an atom.The number of ions of opposite charge that surround each ion in a crystal.Atoms in a compound tend to have the electron configuration of a noble gas.Shows the kinds and numbers of atoms in the smallest representative unit.3.Which of these is NOT part of the cell theory? * "
all living things are made of cells
Ocells come only from other cells
cells are the smallest living unit of an organism
O all living things have blood cells
Answer:
Cells are the smallest living unit of an organism
Answer:
all living things living things have blood cells
Explanation:
this is because robert hooke did not make this apart of the theory
Zn(s) + 2 HCl(aq) —> ZnCl2(aq)
+ H2(g)
If a scientist wanted to create 10L of hydrogen gas at RTP, what mass of HCl would they need to start with?
Answer:
First write the balanced equation for the reaction of HCl with Zn (NOTE: the previous answer did NOT do this and thus obtained an incorrect answer)
Zn + 2HCl ==> ZnCl2 + H2(g)
moles of H2 desired: PV = nRT
n = PV/RT = (1 atm)(10L)/(0.0821 Latm/Kmol)(298K)
n = 0.409 mole H2 desired
moles Zn needed:
0.409 moles H2 x 1 mole Zn/2 moles HCl = 0.204 moles Zn needed
mass Zn needed = 0.204 moles Zn x 65.4 g/mol = 13.4 g Zn needed (to 3 sig. figs.)
Explanation:people always get this wrong but i got you
1. Mixing Water at Two Temperatures
a. One flask contains 150.0 g water at 20.0 °C. A second flask contains 350.0 g water at 95.0 °C. If the two water samples are mixed, what will the final temperature of the water be?
-Assume that the density of water it 1.000 g/cm^3
-The specific heat capacity for water is 4.184 J/g °C
Answer:
[tex]T_f=72.5\°C[/tex]
Explanation:
Hello!
In this case, since this a problem in which the cold water is heated by the hot water, we can write:
[tex]Q_{hot}+Q_{cold}=0[/tex]
Thus, by plugging in the mass, specific heat and temperatures, we obtain:
[tex]m_{hot}C_{hot}(T_f-T_{hot})+m_{cold}C_{cold}(T_f-T_{cold})=0[/tex]
Now, we can also write:
[tex]m_{hot}(T_f-T_{hot})+m_{cold}(T_f-T_{cold})=0[/tex]
Then, after applying some algebra, it is possible to obtain:
[tex]T_f=\frac{m_{hot}T_{hot}+m_{cold}T_{cold}}{m_{hot}+m_{cold}}[/tex]
If we plug in, we obtain:
[tex]T_f=\frac{350.0g*95.0\°C+150.0g*20.0\°C}{350.0g+150.0g}[/tex]
[tex]T_f=72.5\°C[/tex]
Best regards!
please help :) hope you have a good day
Answer:
the volume of the gas will decrease
Given the atomic mass of select elements, calculate the molar mass of each salt.
Element Molar mass
(g/mol)
Beryllium (Be) 9.012
Magnesium (Mg) 24.31
Cobalt (Co) 58.93
Cadmium (Cd) 112.41
Bromine (Br) 79.90
Match the numbers to the appropriate blanks in the sentences below. Make certain each sentence is complete before submitting your answer.
View Available Hint(s)
ResetHelp
1. The molar mass of MgBr2 is The molar mass of M g B r 2 is blank..
2. The molar mass of BeBr2 is The molar mass of B e B r 2 is blank..
3. The molar mass of CoBr2 is The molar mass of C o B r 2 is blank..
4. The molar mass of CdBr2 is The molar mass of C d B r 2 is blank..
Antonio and Addie want to know if perfume fumes affect plant height. They place five identical bean plants in five identical light boxes. In four of the boxes, they place 200 milliliters (mL) of perfume at different distances from the plants, and they make observations twice a week for one month. Which choice best identifies the observation data that should be included in their data table?
Answer:
I think its C I'm sorry if I'm wrong good luck guys!
Explanation:
study the image wich shows an air mass moving into a region wich type of weather will this region most likely experience due to the incoming air mass
Answer:
766ijn
Explanation:
hovibibbunununububububyhybyybybnu
10. Imagine that the unknown solution contains aqueous ammonium sulfate, which is commonly used in fertilizer. For the precipitation of barium sulfate after mixing aqueous ammonium sulfate solution and barium chloride solution (the reactants), write the (1) balanced molecular equation, (2) the complete ionic equation, (3) the net ionic equation AND identify the spectator ions, if any.
Answer:
(1) (NH₄)₂SO₄(aq) + BaCl₂(aq) ⇒ BaSO₄(s) + 2 NH₄Cl(aq)
(2) 2 NH₄⁺(aq) + SO₄²⁻(aq) + Ba²⁺(aq) + 2 Cl⁻(aq) ⇒ BaSO₄(s) + 2 NH₄⁺(aq) + 2 Cl⁻(aq)
(3) SO₄²⁻(aq) + Ba²⁺(aq) ⇒ BaSO₄(s)
(4) NH₄⁺ and Cl⁻
Explanation:
(1) Let's consider the molecular equation that occurs after mixing aqueous ammonium sulfate solution and barium chloride solution. This is a double displacement reaction.
(NH₄)₂SO₄(aq) + BaCl₂(aq) ⇒ BaSO₄(s) + 2 NH₄Cl(aq)
(2) The complete ionic equation includes all the ions and insoluble species.
2 NH₄⁺(aq) + SO₄²⁻(aq) + Ba²⁺(aq) + 2 Cl⁻(aq) ⇒ BaSO₄(s) + 2 NH₄⁺(aq) + 2 Cl⁻(aq)
(3) The net ionic equation includes only the ions that participate in the reaction (not spectator ions) and the insoluble species.
SO₄²⁻(aq) + Ba²⁺(aq) ⇒ BaSO₄(s)
(4) The spectator ions are NH₄⁺ and Cl⁻.
(b) Why must acidic gases be treated before they are released into the atmosphere?
Answer:
because they react with other gases of atmosphere and pollute the environment
what is the chemical equation for methamphetamine
Answer:
C10H15N is the chemical equation for methamphetamine
An airplane has a mass of 12,000kg. If it is accelerating at 16m/sec2, what is its force?(round to the nearest whole number) NEED THIS ASAP
Answer:
[tex]F=1.92x10^5N[/tex]
Explanation:
Hello!
In this case, since the force exerted by an object with a certain mass an acceleration is:
[tex]F=m*a[/tex]
We can plug in the given mass of 12,000 kg and acceleration of 16 m/s^2 to obtain:
[tex]F=12,000kg*16m/s^2\\\\F=192,000kg*m/s^2\\\\F=1.92x10^5N[/tex]
Best regards!
Hail is falling down from the sky at 50 miles per hour. Is this an example of speed,
velocity or acceleration?
Explanation:
tgggghhhhijyyhhjjjjjjjj
Hello, this is a science task and it is due today I would really appreciate it if you guys can help me answer and explain what is the difference between expansion and contraction:) I will mark brainliest!
Answer:
Expansion: increase in size Contraction: decrease in size
Explanation:
The increase in size of an object on heating is called expansion where as the decrease in size of an object on cooling is called contraction.