To solve this we must be knowing each and every concept related to enthalpy and its calculations. Therefore, H[tex]_2[/tex]O is the substances that releases the greatest amount of energy. The correct option is option D.
What is Enthalpy?Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.
Mathematically,
q = n ×ΔH
where
q = amount of heat
n = no of moles
ΔH = enthalpy
n = w / M.M
w = given mass
M.M = molar mass
H[tex]_2[/tex]O is the substances that releases the greatest amount of energy.
Therefore, H[tex]_2[/tex]O is the substances that releases the greatest amount of energy. The correct option is option D.
To know more about enthalpy, here:
brainly.com/question/24170335
#SPJ1
Plants do not grow well when the soil is either too acidic or too basic. How do you solve these problems?
A paracetamol tablet was crushed and an excess of HCl 25cm³ of 1.0mol was added. the result of the solution was titrate against 0.5mol of NaOH. calculate the mass of CaCO3 in the paracetamol.
Answer:
1.35g of CaCO₃ are in the paracetamol
Explanation:
Assuming the volume of the 0.5mol NaOH was 23cm³
The CaCO₃ of paracetamol reacts with HCl as follows:
CaCO₃ + 2HCl → CO₂ + H₂O + CaCl₂
When an excess of HCl is added and titrated, we can find the moles of HCl that react = Moles CaCO₃ based on the second reaction:
NaOH + HCl → H₂O + NaCl
Moles added of NaOH:
23cm³ = 0.023L * (0.5mol / L) = 0.0115 moles NaOH = Moles HCl in excess
Moles of HCl:
25cm³ = 0.025L * (1.0mol / L) = 0.025 moles HCl
The moles of HCl that reacted = Moles CaCO₃ are:
0.025 moles - 0.115 moles = 0.0135 moles CaCO₃
The mass of CaCO₃ -Molar mass: 100.09g/mol- is:
0.0135 moles CaCO₃ * (100.09g/mol) =
1.35g of CaCO₃ are in the paracetamolFill in the Blank
All three types of rock form in which earth layer? _________.
A reversible change, where appearance is altered, but the composition stays the same is _________. An irreversible change that alters the chemical makeup of a substance is _________. Is the melting of ice into liquid water a physical or chemical change? _____ What is involved in any change in matter? ________
The lithosphere is where all three forms of rocks form. A physical change is a reversible change and chemical changes are irreversible. The melting of ice is a physical change and change of matter is chemical.
What are physical and chemical changes. ?The lithosphere is the layer of earth where all three types of rocks such as igneous, metamorphic, and sedimentary can be found. The physical changes are those that affect physical properties and are reversible like heating and cooling.
While the chemical changes are irreversible. The physical changes lead to the change in form of the substance while chemical change leads to the rearrange of matter.
Find out more information about the types of rocks.
brainly.com/question/26400505
Which of the following models a synthesis reaction?
Answer: D
Explanation: i’m right
Copper has two isotopes,
copper-63 and copper-65. It has an atomic mass of 63.546 amu. Sketch a pie graph that shows the approximate abundance of each
copper isotope based on the atomic mass?
Answer:
69.152 % → 63Cu
30.848 % → 65Cu
Explanation:
As you know, the average atomic mass of an element is determined by taking the weighted average of the atomic masses of its naturally occurring isotopes.
24. What is the total number of grams of potassium chloride needed to saturate exactly 300 grams of water at 10°C?
1) 70 2) 90 3) 80 4) 60
Answer:
That would be 90 grams
Explanation:
This should be right but please, please, please correct me if I'm worng because I dont want anyone to fail because of me. Have a great day luv <3
The answer is option B , 90 grams of potassium chloride(KCl) is needed to saturate exactly 300 grams of water at 10°C
How do you define Solubility ?The measure of the degree to which a substance gets dissolved in a solvent to become a solution.
The solubility of KCl in water at 10°C is 31.2gm/100gm of water .
So in 300 gm of water 3 * 31.2 gm = 93.6 gm
Using Significant Figures we can select option B i.e. 90 gm.
Hence Option B , 90 grams of potassium chloride is needed to saturate exactly 300 grams of water at 10°C
To know more about Solubilty
https://brainly.com/question/8591226
#SPJ2
__Zn + __HCl --> __ZnCl2 + __H2
If 26.22 Liters of Hydrogen gas are produced, how many moles of Hydrochloric acid were reacted?
Answer:
1. The balanced equation:
Zn + 2HCl —> ZnCl₂ + H₂
The coefficients are: 1, 2, 1, 1
2. 2.34 moles of HCl
Explanation:
1. The balanced equation
__Zn + __HCl —> __ZnCl₂ + __H₂
There are 2 atoms of H on the right side and 1 atom on the left side
It can be balance by writing 2 before HCl as shown below:
Zn + 2HCl —> ZnCl₂ + H₂
Now the equation is balanced.
The coefficients are: 1, 2, 1, 1
2. Determination of the number of mole of HCl that reacted.
NOTE: 1 mole of H₂ = 22.4 L at STP.
Zn + 2HCl —> ZnCl₂ + H₂
From the balanced equation above,
2 moles of HCl reacted to produce 1 mole (i.e 22.4 L) of H₂.
Finally, we shall determine the number of mole of HCl needed to produce 26.22 L of H₂. This can be obtained as follow:
From the balanced equation above,
2 moles of HCl reacted to produce 22.4 L of H₂.
Therefore, Xmol of HCl will react to produce 26.22 L of H₂ i.e
Xmol of HCl = (2 × 26.22)/22.4
Xmol of HCl = 2.34 moles
Thus, 2.34 moles of HCl is needed for the reaction.
2. If 1.204 X 1024 atoms of sodium is 20% of the total sodium atoms in sodium
chloride NaCl), how many grams of salt do you have ?
Answer:
584.2 g
Explanation:
Hello there!
In this case, since we know the 20% of the atoms correspond to sodium, we can compute the total atoms as shown below:
[tex]\frac{1.204 x10^{24}}{0.2}=6.02x10^{24}atoms[/tex]
Which are also equal to 1 mol and the Avogadro's number of sodium chloride with a molar mass of 58.44 g/mol; thus, the grams of salt turn out to be:
[tex]6.02x10^{24}atoms*\frac{1mol}{6.022x10^{23}atoms} *\frac{58.44g}{1mol}\\\\=584.2g[/tex]
Best regards!
Which of the following mole ratios is not correct in the reaction below:
N2 + 3 H2 --> 2 NH3
C
mol H2 / 1 mol NH3 3
mol H2 / 1 mol N2 3
mol N2 / 2 mol NH3 1
mol NH3 / 3 mol H2 2
Help I only have 15 minutes left
Answer:
3 mol H2 / 1 mol NH3
Explanation:
Mole ratio depicts or shows the relationship between the number of moles of two substances in a chemical reaction. The following chemical equation is given:
N2 + 3H2 → 2NH3
According to the above chemical equation;
- 1 mole of N2 reacts
- 3 moles of H2 reacts
- 2 moles of NH3 is produced
Hence, this means that according to the options provided in this question, the incorrect one is 3 mol H2 / 1 mol NH3 because 2 moles rather than 1 mol of NH3 is involved.
Which of the following leads to a higher rate of effusion?
Answers:
1. Reduced temperature
2. Lower molar mass
3. Slower particle movement
4. Cooler gas sample
Answer:
Lower molar mass :)
Explanation:
Answer:
2. Lower Molar Mass
Explanation:
effusion can increase with either temperature increase, faster moving particles, or when the gas has lower molar mass. the only answer option that fits the description is answer option 2. Lower molar mass
Which statement about the atomic nucleus is correct?A.The nucleus is made of protons and has a negative charge.B.The nucleus is made of protons and neutrons and has a negative charge.C.The nucleus is made of electrons and has a negative charge.D.The nucleus is made of protons and neutrons and has a positive charge.
HELPPP PLEASE !/!/!/!/!/!/!/!
Answer:
the second question should be along the staircase
When these marbles collide, what force is experienced by each marble?
Answer:
when they collide they can experience collision
because without force collision wouldn't have happen.
an empty relative density bottle weights 20g. the bottle weights 40g when filled with petrol and 60g when filled with water. determine the density of the petrol.( density of water=1000kg/m³)
Answer:
500 Kg/m³
Explanation:
From the question given above, the following data were obtained:
Mass of empty bottle = 20 g
Mass of bottle + petrol = 40 g
Mass of bottle + water = 60 g
Density of water = 1000 Kg/m³
Density of petrol =?
Next, we shall determine the mass of water. This can be obtained as follow:
Mass of empty bottle = 20 g
Mass of bottle + water = 60 g
Mass of water =?
Mass of water = (Mass of bottle + water) – (Mass of empty bottle)
Mass of water = 60 – 20
Mass of water = 40 g
Converting 40 g to Kg, we have:
1000 g = 1 Kg
Therefore,
40 g = 40 × 1 Kg / 1000 g
40 g = 0.04 Kg
Next, we shall determine the volume of the bottle by calculating the volume of water. This can be obtained as follow:
Mass of water = 0.04 Kg
Density of water = 1000 Kg/m³
Volume of water =?
Density = mass / volume
1000 = 0.04 / volume
Cross multiply
1000 × volume = 0.04
Divide both side by 1000
Volume of water = 0.04 / 1000
Volume of water = 4×10¯⁵ m³
Thus, the volume of the bottle is 4×10¯⁵ m³
Next, we shall determine the mass of the petrol. This can be obtained as follow:
Mass of empty bottle = 20 g
Mass of bottle + petrol = 40 g
Mass of petrol =?
Mass of petrol = (Mass of bottle + petrol ) – (Mass of empty bottle)
Mass of petrol = 40 – 20
Mass of petrol = 20 g
Converting 20 g to Kg, we have:
1000 g = 1 Kg
Therefore,
20 g = 20 × 1 Kg / 1000 g
20 g = 0.02 Kg
Finally, we shall determine the density of the petrol. This can be obtained as follow:
Mass of petrol = 0.02 Kg
Volume of petrol = 4×10¯⁵ m³
Density of petrol =?
Density = mass / volume
Density of petrol = 0.02 / 4×10¯⁵
Density of petrol = 500 Kg/m³
3)
Acid and Base Characteristics
Substance A
Substance
Substance D
Sour taste
Neutral taste
Substance B
Bitter taste
Strongly conducts
electricity
Strongly conducts electricity,
Sharp taste
Strongly conducts
electricity
Reacts with most metals to generate
hydrogen gas.
Weakly conducts
electricity
Can react with acids or
bases
Can react to make soap.
Generally will not react,
Predict which substance would not act as an acid or a base according to Bronsted-Lowry s definition
-)
alc
NH
A)
А
hing
Cale
8
B
Answer:C
Explanation:
Answer:
Substance D
Explanation:
USA Test Prep Corrections
__Na3PO4 + __Sr(NO3)2 --> ___Sr3(PO4)2 + __NaNO3
If .0789 moles of Strontium Nitrate are reacted, how many moles of Sodium Phosphate were reacted?
Answer:
0.0526mol
Explanation:
The chemical equation given in this equation is as follows:
Na3PO4 + Sr(NO3)2 → Sr3(PO4)2 + NaNO3
However, this equation is unbalanced as the number of atoms of each element on each side does not correlate. The balanced equation is as follows:
2Na3PO4 + 3Sr(NO3)2 → Sr3(PO4)2 + 6NaNO3
This balanced equation means that:
2 moles of Sodium Phosphate (Na3PO4) is required to react with 3 moles of Strontium Nitrate (Sr(NO3)2)
Hence, if 0.0789 moles of Strontium Nitrate are reacted, then 0.0789 × 2/3
moles of sodium phosphate will also react.
= 0.0789 × 2/3
= 0.1578/3
= 0.0526mol
Car manufacturers use radiation for which task?
A) Sealing Windows
B) Drying paint
C) Cleaning tires
D) Lubricating engines
THE CORRECT ANSWER IS B.
#edge2021
Answer:
Indeed it is B, you are correct! :3
Explanation:
:3
Answer:
B. Drying paint
Car manufacturers use UV radiation to dry the paint o the vehicle. The high reflectivity of infrared radiation helps to keep the car interior cool. It also gives advantages over convection heating.
Explanation:
Hope it helps
A sample of gas at 62.0°C occupies a volume of 4.80 L at a pressure of 2.90 atm. How many
moles of gas are contained in the sample?
Answer: 37.01 moles (mol) of gas
Explanation:Use PV=nRT
which is also equal to n=PV/RT
P=2.90
V= 4.80
R = 8.31 (R will always be the same in any equation)
T= 62.0
2.90 x 4.80= 13.92 / 8.31 x 62= 515.22
13.92/13.92=515.22/13.92
n= 37.01 mol
Calculate AH for the reaction: C2H4(g) + H2(g)-->C2H6(g)
Solve this problems using the equation: C = λ x ν........ A microwave oven emits radiation at a wavelength of 5.00 x 10e-5 m. What is the frequency of this radiation?
Answer:
c = λ x ν
v =c/λ=(3*10e8)/(5.00 x 10e-5)=6000000000000
f = v/λ =6000000000000/5.00 x 10e-5=120000000
Explanation:
Itis usually alloyed with aluminum to produce high quality, anti-corrosion
wheel mags
Answer:
Aluminum is the second most abundant metallic element on earth. It has been estimated that 8% of the earth's crust is composed of aluminum, usually found in the bauxite form. On a volume basis, aluminum has become the most widely used non-ferrous metal.
Primary aluminum production is the quantity of primary aluminum produced in a specified period and the quantity of molten or liquid metal tapped from pots that is weighed before transfer to a holding furnace or before further processing.
Explanation:
what is a reservoir?
Answer:
a storage space for fluids
Explanation:
Answer:
an area where large amounts of water are stored
Explanation:
Which of the statements listed below is negative aspect of a volcanic eruption?
A. generating geothermal energy.
B. lava flows and lahars clear areas of woodland or agriculture,
C. the dramatic scenery created by volcanic eruptions attracts tourist.
D. lava and ash deposited during a volcanic eruption breaks down to provide valuable
nutrients for the soil.
CANO
Answer:
C . the dramatic scenery created by volcanic eruptions attracts tourists.
The statement 'lava flows and lahars clear areas of woodland or agriculture' is a negative aspect of a volcanic eruption (Option B).
A volcanic eruption refers to the expulsion of lava and dangerous gases from a volcano.These volcanic eruptions can destroy large areas including lands for agriculture or woodland.A lahar can be defined as a mix of cold/warm water and fragments of sediments (rocks) that flow fast down the slope of the volcano.In conclusion, the statement 'lava flows and lahars clear areas of woodland or agriculture' is a negative aspect of a volcanic eruption (Option B).
Learn more in:
https://brainly.com/question/1622004
PLZ HELP I NEED THIS RN!
when the balls reach the bottom of the ramp, which statement will describe their energy?
A. they will have no kinetic energy
B. they will have 100% potential energy
C. they will have 100% kinetic energy
C. they will have different amounts of potential energy
Answer:
they will have 100% kinetic energy
Explanation:
all the potential energy has been used when it is at the bottom of the ramp
Which one of the following atoms has the largest radius?
Sr, Rb, K, Ca, Y
Answer: Rb (rubidium) has a radius of 290 pm, making it have the largest of the 5 elements listed.
Explanation:
For number 2 I need help with balancing equations and list the type of reaction plz and thank you
Answer:
Cd(NO3)2 + FeCl3 = CdCl2 + Fe(NO3)2
is an impossible equation to balance as this reaction will simply not occur and it will not work either ways
did your teacher make this ?
The number of electrons in the valence shell of aluminum is
Answer: It has 13 electrons total and and 3 in the valance shell.
Explanation: Aluminum
Why are many chemical names so complex?
Answer:
cause they like it that way
Explanation:
btw cant tell if this is legit or not
Determine the number of moles of phosphorus contained in 4.41 x 10^24
atoms of phosphorus.
Answer:
7.33 mol P
Explanation:
4.41 × 10²⁴ / 6.02 × 10²³ = 7.33
Answer:
the answer is 7.33 mol P
Explanation:
Suggest why sodium wasn’t produced until the early 19th century.
Answer:
The reason is that sodium attaches itself very strongly to other elements. Its compounds are very difficult to break apartand also because it is so reactive.