Answer:
#1: 0.00144 mmolHCl/mg Sample
#2: 0.00155 mmolHCl/mg Sample
#3: 0.00153 mmolHCl/mg Sample
Explanation:
A antiacid (weak base) will react with the HCl thus:
Antiacid + HCl → Water + Salt.
In the titration of antiacid, the strong acid (HCl) is added in excess, and you're titrating with NaOH moles of HCl that doesn't react.
Moles that react are the difference between mmoles of HCl - mmoles NaOH added (mmoles are Molarity×mL added). Thus:
Trial 1: 0.391M×14.00mL - 0.0962M×34.26mL = 2.178 mmoles HCl
Trial 2: 0.391M×14.00mL - 0.0962M×33.48mL = 2.253 mmoles HCl
Trial 3: 0.391M×14.00mL - 0.0962M×33.84mL = 2.219 mmoles HCl
The mass of tablet in mg in the 3 experiments is 1515mg, 1452mg and 1443mg.
Thus, mmoles HCl /mg OF SAMPLE for each trial is:
#1: 2.178mmol / 1515mg
#2: 2.253mmol / 1452mg
#3: 2.219mmol / 1443mg
#1: 0.00144 mmolHCl/mg Sample#2: 0.00155 mmolHCl/mg Sample#3: 0.00153 mmolHCl/mg SampleWhich of the following is NOT a type of crystal structure? A. None of these B. Metallic C. Ionic D. Macromolecular (giant covalent)
Answer:
A. None of these.
Explanation:
A crystal structure is an arrangement of atoms or ions in a repeating three-dimensional array.
B. is wrong. Metal atoms, such as gold, arrange themselves into a crystal structure.
C. is wrong. Ionic solids, such as sodium chloride, arrange themselves into a crystal structure.
D. is wrong. Macromolecules (network solids), such as diamond, arrange themselves into a crystal structure.
The correct answer is None of these.
What is a crystal structure?A crystal structure is a three-dimensional collection of atoms or ions that repeats itself.Metal atoms(gold), Ionic solids (sodium chloride), and Macromolecules(network solids) arrange themselves into a crystal structure.Learn more about crystal structure here:-
https://brainly.com/question/23986315
#SPJ2
Convert 120 degrees F to K.
[?]K
Answer:
322
Explanation:
This is easy
What is the final pH of a solution with an initial concentration of 2.5mM Ascorbic acid (H2C6H6O6) which has the following Kas: 7.9x10-5 and 1.6x10-12
Answer:
pH = 3.39
Explanation:
The equilibrium in water of ascorbic acid (With its conjugate base) is:
H₂C₆H₆O₆(aq) + H₂O(l) ⇄ HC₆H₆O₆⁻(aq) + H₃O⁺(aq)
Where the acidic dissociation constant is written as:
Ka = 7.9x10⁻⁵ = [HC₆H₆O₆⁻] [H₃O⁺] / [H₂C₆H₆O₆]
H₂O is not taken in the Ka expression because is a pure liquid.
As initial concentration of H₂C₆H₆O₆ is 2.5x10⁻³M, the equilibrium concentration of each species in the equilibrium is:
[H₂C₆H₆O₆] = 2.5x10⁻³M - X
[HC₆H₆O₆⁻] = X
[H₃O⁺] = X
Replacing in the Ka expression:
7.9x10⁻⁵ = [X] [X] / [2.5x10⁻³M - X]
1.975x10⁻⁷ - 7.9x10⁻⁵X = X²
0 = X² + 7.9x10⁻⁵X - 1.975x10⁻⁷
Solving for X:
X = -0.00048566→ False solution, there is no negative concentrations
X = 0.00040666 → Right solution
As [H₃O⁺] = X, [H₃O⁺] = 0.00040666
pH is defined as -log [H₃O⁺];
pH = -log 0.00040666,
pH = 3.39PLEASE ANSWER AS SOON AS POSSIBLE REALLY WOULD APPRECIATE IT
Answer:
The answer is option D.
Hope this helps you
Therapeutic drugs generally need to have some hydrophobic and hydrophilic components to be able to effectively reach their target organs and tissues given there are aqueous and nonaqueous parts of the body. The degree to which a compound is hydrophobic and hydrophilic can be determined by measuring its relative solubility in water and octanol, C8H17OH, and water. To do this, a sample of the compound is added to a mixture of water and octanol and mixed well. Water and octanol are immiscible so after the mixture settles, the concentration of the compound in water and the concentration of the compound in octanol is measured. The ratio of the concentrations is called the partition ratio:
The question is incomplete as some part is missing:
concentration in octanol Partition Ratio = concentration in water
a) What are the intermolecular forces of attraction between octanol molecules? Explain.
b) Which of the intermolecular forces of attraction identified in (a) account for most of the interactions between octanol molecules? Explain. Use the immiscibility in water and the data included in figures 1 and 2 as evidence to support your answer.
c) Would a compound with a partition coefficient less than one be more hydrophobic or more hydrophilic than one with a partition coefficient greater than 10? Explain.
d) Would nonane (figure 2) be more soluble in water or octanol? Explain.
e) Draw another structure for a compound with the same chemical formula as nonane (CH20) that has a lower boiling point. Explain.
f) Are any of the C atoms in the structure you drew for CH20 sp?hybridized? Explain.
Octanol Boiling point = 195°C Figure 2 Nonane (CH20) Boiling point = 151°C
Answer:
1. The forces between octanol molecules would be attractive. These forces include Vanderwaal forces, H-bonds due to the presence of highly polar O-H group.
2. H-bonding ahould account for most of the attractive forces. The O-H bond should behave like and dipole, oxygen of one molecule attracts the hydrogen of the neighbouring molecule forming D-H...A links throughout (D stands for donor of H-Bond and A for acceptor for H-Bond).
3. Partition coefficient less than 1 will be more hydrophilic, generally drugs with low partition coefficients are regarded as hydrophilic. As parition coefficient of 10 mean more of the solute is dispersed in octanol as compared to water.
4. Nonane is non polar, so it would not dissolve in water. It follows the rule like dissolves like. Polar substances dissolve in polar solvents. 1-octanol is able to bind with water through hydrogen bonds thus its soluble in water but nonane doesn't. Nonane will forms a different layer from water.
5) no all carbons in 2-methyloctane are single bonded. Thus sp3 hybrid. A sp2 hybridised carbon would have a double bond C=C.
If you combine 24.2 g of a solute that has a molar mass of 24.2 g/mol with 100.0 g of a solvent, what is the molality of the resulting solution
Answer: 10 moles/kg.
Explanation:
Given, Mass of solute = 24.2 g
Molar mass of solute = 24.2 g/mol
[tex]\text{Moles of solute =}\dfrac{\text{Mass of solute}}{\text{Molar mass of solute}}\\\\=\dfrac{24.2}{24.2}=1[/tex]
Mass of solvent = 100.0g = 0.1 kg [1 g=0.001 kg]
[tex]\text{Molality}=\dfrac{\text{Moles of solute}}{\text{kilograms of Solvent}}\\\\=\dfrac{1}{0.1}\\\\=10\ moles/kg[/tex]
Hence, the molality of the resulting solution is 10 moles/kg.
A volumetric flask contains 25.0 mL of a 14% m/V sugar solution. If 2.5 mL of this solution is added to 22.5 mL of distilled water, what is the % m/V of the new solution.
Answer:
The new solution is 1.4% m/V
Explanation:
The concentration of the new solution, obtained by adding 22.5 mL of distilled water to 2.5 mL of 14 % m/V sugar solution, is 1.4% m/V.
We have 2.5 mL (V₁) of a concentrated solution and add it to 22.5 mL of distilled water. Assuming the volumes are additives, the volume of the new solution (V₂) is:
[tex]2.5 mL + 22.5 mL = 25.0 mL[/tex]
We want to prepare a dilute solution from a concentrated one, whose concentration is 14% m/V (C₁). We can calculate the concentration of the dilute solution (C₂) using the dilution rule.
[tex]C_1 \times V_1 = C_2 \times V_2\\C_2 = \frac{C_1 \times V_1}{V_2} = \frac{14\% m/V \times 2.5 mL}{25.0 mL} = 1.4 \% m/V[/tex]
The concentration of the new solution, obtained by adding 22.5 mL of distilled water to 2.5 mL of 14 % m/V sugar solution, is 1.4% m/V.
You can learn more about dilution here: https://brainly.com/question/13844449
For the reaction 2 A - Products, the concentration of A is monitored over time. A graph of [A] versus time was found to be linear, with a negative slope. Select the true statement regarding this reaction.
A) The reaction is first order with respect to A.
B) The reaction is second order with respect to A.
C) The rate constant has a negative value.
D) In 2 The reaction has a half-life equal to k.
E) None of these statements is true.
Answer:
none of these statements is true
according to the question E) None of these statements is true.
What is a concentration in chemistry?The concentration of a chemical substance expresses the amount of a substance present in a mixture. There are many different ways to express concentration. Chemists use the term solute to describe the substance of interest and the term solvent to describe the material in which the solute is dissolved
What is concentration in chemistry units?
Quantitative units of concentration include molarity, molality, mass percentage, parts per thousand, parts per million, and parts per billion.
Learn more about concentration here
https://brainly.com/question/24595796
#SPJ2
what is the polarity of black pepper
Answer:
Polarity in chemistry referred to physical properties of compounds related to solubility, melting and boiling properties.
Polarity of black pepper can be seen when black pepper is sprinkled on water. The balck pepper float on water and get displaced if touched.
It means black pepper is non-polar and have no difference in electronegativity between bonded atoms. Black pepper is so light in weight and non-polar, the surface tension of water keep it floating in the water.
At 25.0°C the Henry's Law constant for methane CH4 gas in water is ×1.410−3/Matm.
Calculate the mass in grams of CH4 gas that can be dissolved in 75.mL of water at 25.0°C and a CH4 partial pressure of 0.68atm. Round your answer to 2 significant digits.
Answer:
1.1 × 10⁻³ g
Explanation:
Step 1: Given data
Henry's Law constant for methane (k): 1.4 × 10⁻³ M/atm
Volume of water (=volume of solution): 75 mL
Partial pressure of methane (P): 0.68 atm
Step 2: Calculate the concentration of methane in water (C)
We will use Henry's law.
[tex]C = k \times P = 1.4 \times 10^{-3}M/atm \times 0.68atm = 9.5 \times 10^{-4}M[/tex]
Step 3: Calculate the moles of methane in 75 mL of water
[tex]\frac{9.5 \times 10^{-4}mol}{L} \times 0.075 L = 7.1 \times 10^{-5}mol[/tex]
Step 4: Calculate the mass corresponding to 7.1 × 10⁻⁵ mol of methane
The molar mass of methane is 16.04 g/mol.
[tex]7.1 \times 10^{-5}mol \times \frac{16.04g}{mol} = 1.1 \times 10^{-3} g[/tex]
A 32.3-gram sample of gas is found to have a volume of 1.9 liters at 301 K and 1.21 atm. What is the molar mass of this gas? Show all of the work used to solve this problem.
Answer:
351.1g/mol
Explanation:
you can find the answer using The ideal gas equation
n= PV/RT
n=(1.21*1.9/0.082*301)mol
n=0.092 mol
molar mass=Mass/mole
m=32.3g/0.092mol
m=351.1g/mol
Classify each molecule by whether its real bond angles are the same as or different than its model (ideal) bond angles. In other words, do the bond angles change when you switch between Real and Model mode at the top of the page?
The question is incomplete; the complete question is: Classify each molecule by whether its real bond angles are the same as or different than its model (ideal) bond angles. In other words, do the bond angles change when you switch between Real and Model mode at the top of the page? Same (angles do not change) Different (angles change) Answer Bank | H2O | CO2, SO2, XeF2, BF3 CIF3, NH3, CH4, SF4, XeF4, BrF5, PCI5,SF6
Answer:
Compounds whose real bond angle are the same as ideal bond angle;
SF6, BF3, CH4, PCI5
Compounds whose real bond angles differ from ideal bond angles;
H2O, CO2, SO2, XeF2, CIF3, NH3, SF4, XeF4, BrF5
Explanation:
According to the valence shell electron pair repulsion theory (VSEPR), molecules adopt various shapes based on the number of electron pairs on the valence shell of the central atom of the molecule. The electron pairs usually orient themselves as far apart in space as possible leading to various observed bond angles.
The extent of repulsion of lone pairs is greater than that of bond pairs. Hence, the presence of lone pairs on the valence shell of the central atom in the molecule distorts the bond angles of molecules away from the ideal bond angles predicted on the basis of valence shell electron pair repulsion theory.
For instance, methane is a perfect tetrahedron having an ideal bond angle of 109°28'. Both methane and ammonia are based on a tetrahedron, however, the presence of a lone pair of electrons on nitrogen distorts the bond angle of ammonia to about 107°. The distortion of lone pairs in water is even more as the bond angles of water is about 104°.
Calcium carbide, CaC2, reacts with water to form calcium hydroxide and the flammable gas ethyne (acetylene) in the reaction: What mass of ethyne can be produced
Answer:
1 mole of CaC₂ will produce 26g of C₂H₂ or 64.1g of CaC₂ will produce 26g of C₂H₂
Explanation:
Hello,
To solve this question, we'll require a balanced chemical equation of reaction between calcium carbide and water.
Equation of reaction
CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂
Molar mass of calcium carbide (CaC₂) = 64.1g/mol
Molar mass of water (H₂O) = 18g/mol
Molar mass of calcium hydroxide (Ca(OH)₂) = 74g/mol
Molar mass of ethyne (C₂H₂) = 26g/mol
From the equation of reaction, 1 mole of CaC₂ will produce 1 mole of C₂H₂
1 mole of CaC₂ = mass / molar mass
Mass = 1 × 64.1
Mass = 64.1g
1 mole of C₂H₂ = mass / molar mass
Mass = 1 × 26
Mass = 26g
Therefore, 1 mole of CaC₂ will produce 26g of C₂H₂
Note: this is a hypothetical calculation since we were not given the initial mass of CaC₂ that starts the reaction
What is the mass of 7.68 x 1024 molecules of phosphorus trichloride?
Answer:
THE MASS OF 7.68 *10^24 MOLECULES OF PHOSPHORUS TRICHLORIDE IS 1746.25 g.
Explanation:
Molar mass of PCl3 = ( 31 + 35.5 *3) = 137.5 g/mol
At 7.68 * 10^24 molecules, how many number of mole is present?
6.03 * 10^23 molecules = 1 mole
7.68*10^24 molecules = x mole
x mole = 7.68 *10^24 molecules/ 6.03 *10^23
x mole = 1.27 *10 moles
x mole = 12.7 moles
Using mole = mass / molar mass
mass = mole * molar mass
mass = 12.7 moles * 137.5 g/mol
mass = 1746.25 g
Hence, the mass of 7.68 *10^24 molecules is 1746.25 g
Write the following isotope in nuclide notation: oxygen-14
Answer:
[tex]14\\8[/tex]O
Explanation:
The top number always represents the mass number.
The bottom number always represents the atomic number.
The element always goes after the numbers.
If charge is present, that comes after the element.
How many grams of CO are produced when 41.0 g of C reacts?
Answer:
95.7 g CO to the nearest tenth.
Explanation:
2C + O2 ---> 2CO
Using relative atomic masses:
24 g C produces 2*12 + 2*16 g CO.
So 41 g produces ( (2*12 + 2*16) * 41 ) / 24
= 95.7 g CO,
Determine the radius of an Al atom (in pm) if the density of aluminum is 2.71 g/cm3 . Aluminum crystallizes in a face centered cubic structure with an edge leng
Answer:
143pm is the radius of an Al atom
Explanation:
In a face centered cubic structure, FCC, there are 4 atoms per unit cell.
First, you need to obtain the mass of an unit cell using molar mass of Aluminium and thus, obtain edge length and knowing Edge = √8R you can find the radius, R, of an Al atom.
Mass of an unit cell
As 1 mole of Al weighs 26.98g. 4 atoms of Al weigh:
4 atoms × (1mole / 6.022x10²³atoms) × (26.98g / mole) = 1.792x10⁻²²g
Edge length
As density of aluminium is 2.71g/cm³, the volume of an unit cell is:
1.792x10⁻²²g × (1cm³ / 2.71g) = 6.613x10⁻²³cm³
And the length of an edge of the cell is:
∛6.613x10⁻²³cm³ = 4.044x10⁻⁸cm = 4.044x10⁻¹⁰m
Radius:
As in FCC structure, Edge = √8 R, radius of an atom of Al is:
4.044x10⁻¹⁰m = √8 R
1.430x10⁻¹⁰m = R.
In pm:
1.430x10⁻¹⁰m ₓ (1x10¹²pm / 1m) =
143pm is the radius of an Al atomThe radius of the atom of Al in the FCC structure has been 143 pm.
The FCC lattice has been contributed with atoms at the edge of the cubic structure.
The FCC has consisted of 4 atoms in a lattice.
The mass of the unit cell of Al can be calculated as:[tex]\rm 6.023\;\times\;10^2^3[/tex] atoms = 1 mole
4 atoms = [tex]\rm \dfrac{4}{6.023\;\times\;10^2^3}[/tex] moles
The mass of 1 mole Al has been 26.98 g/mol.
The mass of [tex]\rm \dfrac{4}{6.023\;\times\;10^2^3}[/tex] moles = [tex]\rm \dfrac{4}{6.023\;\times\;10^2^3}[/tex] moles × 26.98 g
The mass of 1 unit cell of Al has been = 1.792 [tex]\rm \bold{\times\;10^-^2^2}[/tex] g.
The volume of the Al cell can be calculated as:Density = [tex]\rm \dfrac{mass}{volume}[/tex]
Volume = Density × Mass
The volume of Al unit cell = 2.71 g/[tex]\rm cm^3[/tex] × 1.792 [tex]\rm \times\;10^-^2^2[/tex] g
The volume of Al cell = 6.613 [tex]\rm \times\;10^-^2^3[/tex] [tex]\rm cm^3[/tex]
The volume of the cube has been given as:Volume = [tex]\rm edge\;length^3[/tex]
6.613 [tex]\rm \times\;10^-^2^3[/tex] [tex]\rm cm^3[/tex] = [tex]\rm edge\;length^3[/tex]
Edge length = [tex]\rm \sqrt[3]{6.613\;\times\;10^-^2^3}[/tex] cm
Edge length = 4.044 [tex]\rm \times\;10^-^8[/tex] cm
Edge length = 4.044 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m.
In an FCC lattice structure, the radius of the atom can be given by:Edge length = [tex]\rm \sqrt{8\;\times\;radius}[/tex]
4.044 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m = [tex]\rm \sqrt{8\;\times\;radius}[/tex]
Radius = 1.430 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m.
1 m = [tex]\rm 10^1^2[/tex] pm
1.430 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m = 143 pm.
The radius of the atom of Al in the FCC structure has been 143 pm.
For more information about the FCC structure, refer to the link:
https://brainly.com/question/14934549
Why does a new period start on the periodic table, instead of the row continuing? A. A new period starts when a new energy shell starts. B. A new period starts when a new neutron cycle starts. C. None of these D. It is based on how many protons it has.
Answer:
B
Explanation:
All the elements in a period have valence electrons in the same shell. The number of valence electrons increases from left to right in the period. When the shell is full, a new row is started and the process repeats.
A new period starts when a new neutron cycle starts. Hence, option B is correct.
What is the period in the periodic table?A period in the periodic table is a row of chemical elements. All elements in a row have the same number of electron shells.
All the elements in a period have valence electrons in the same shell.
The number of valence electrons increases from left to right in the period.
When the shell is full, a new row is started and the process repeats.
Hence, option B is correct.
Learn more about the period in the periodic table here:
https://brainly.com/question/3433177
#SPJ2
https://brainly.com/question/16061498?referrer=searchResults
Calculate the percent ionization of nitrous acid in a solution that is 0.249 M in nitrous acid. The acid dissociation constant of nitrous acid is
Answer:
4.26 %
Explanation:
There is some info missing. I think this is the original question.
Calculate the percent ionization of nitrous acid in a solution that is 0.249 M in nitrous acid. The acid dissociation constant of nitrous acid is 4.50 × 10 ⁻⁴.
Step 1: Given data
Initial concentration of the acid (Ca): 0.249 M
Acid dissociation constant (Ka): 4.50 × 10 ⁻⁴
Step 2: Write the ionization reaction for nitrous acid
HNO₂(aq) ⇒ H⁺(aq) + NO₂⁻(aq)
Step 3: Calculate the concentration of nitrite in the equilibrium ([A⁻])
We will use the following expression.
[tex][A^{-} ] = \sqrt{Ca \times Ka } = \sqrt{0.249 \times 4.50 \times 10^{-4} } = 0.0106 M[/tex]
Step 4: Calculate the percent ionization of nitrous acid
We will use the following expression.
[tex]\alpha = \frac{[A^{-} ]}{[HA]} \times 100\% = \frac{0.0106M}{0.249} \times 100\% = 4.26\%[/tex]
Identify the correctly written chemical reaction
A. Reactant + Reactant = Product
B. Reactant + Reactant → Product + Product
C. Reactant + Product → Reactant + Product
D. Product + Product Reactant + Reactant
Answer:
B. Reactant + Reactant -> Product + Product
Explanation:
Reactants are substances that- as the name suggests- reacts with other substances at the beginning of a reaction
Products are substances that are produced as a result of the reaction
Typically, when writing a chemical reaction, an arrow is used to show the direction the reaction is moving. In this case, the arrows in options B and C suggest that the reaction only moves in one direction- forwards
And as mentioned above, reactants are the substances at the start of the reaction, they're what mixes together to form a new product.
To keep things simple:
Products can't be at the beginning of a reaction since they weren't formed yet.
Similarly, reactants can't be part of the products since they already existed and didn't need to be made. In a lot cases, the reactants would be completely used up to make the products
As such, only one possible chemical reaction would follow that reasoning:
Reactant + Reactant -> Product + Product
Reactant + Reactant → Product + Product is the correctly written chemical reaction. Hence, option B is correct.
What is a chemical equation?A chemical equation is a mathematical expression of the chemical reaction which represents the product formation from the reactants.
In an equation, the reactants are written on the left-hand side and the products are written on the right-hand side demonstrated by one-headed or two-headed arrows.
Hence, option B is correct.
Learn more about the chemical equation here:
https://brainly.com/question/12363199
#SPJ2
What is a heterogeneous mixture?
Answer:
The type of mixture whose components are seen through our naked eyes is known as heterogeneous mixture. it is a mixture of small constituent parts of substances.
for eg, mixture of sand and sugar.
hope it helps..
Which products are formed when aluminum is added to a silver chlorine solution?
Answer:
Alcl3 and Cl2
Explanation:
the product above will be formed
Answer:
silver (Ag) and aluminum chloride (AlCl₃)
Explanation:
The reaction between aluminum and silver chloride is a single replacement reaction. A single replacement reaction is when one element switches places with another.
Al + 3AgCl ➔︎ 3Ag + AlCl₃
In the reaction, the cations (positively charged ions) switch places. Aluminum (Al) switches places with Silver (Ag). So, the products of the reaction are silver and aluminum chloride.
Hope this helps.
Why does the excess of base used in these eliminations favor the E2 over the E1 mechanism for elimination
Answer:
The base is involved in the rate determining step of an E2 reaction mechanism
Explanation:
Let us get back to the basics. Looking at an E1 reaction, the rate determining step is unimolecular, that is;
Rate = k [Carbocation] since the rate determining step is the formation of a carbonation.
For an E2 reaction however, the reaction is bimolecular hence for the rate determining step we can write;
Rate = k[alkyl halide] [base]
The implication of this is that an excess of either the alkyl halide or base will facilitate an E2 reaction.
Hence, when excess base is used, E2 reaction is favoured since the base is involved in its rate determining step. In an E1 reaction, the base is not involved in the rate determining step hence an excess of the base has no effect on an E1 reaction.
. Explain why, in the sample calculations, 0.1 g of the unknown produced a GREATER freezing point depression than~e same mass of naphthalene.
Answer
Naphthalene is a non electrolyte
If the unknown compound is an electrolyte it gives 2 or more ions in solution
( NaCl >> Na+ + Cl- => 2 ions
Ca(NO3)2 >> Ca2+ + 2 NO3- => 3 ions)
the f.p. lowering is directly proportional to the molal concentration of dissolved ions in the solution )
For naphthalene
delta T = 1.86 x m
for a salt that gives 2 ions
delta T = 1.86 x m x 2
hence the lowering in freezion point of unkown is greater then napthalene
Calculate the height of a column of water at 25 °C that corresponds to normal atmospheric pressure. The density of water at this temperature is 1.0 g/
Answer:
10.328 m
Explanation:
normal atmospheric pressure = 101325 Pa
density of water at 25 °C = 1.0 g/cm^3 = 1000 kg/m^3
pressure = pgh
where p = density
g = acceleration due to gravity = 9.81 m/s^2
h = height of column
imputing values, we have
101325 = 1000 x 9.81 x h
height of column h = 101325/9810 = 10.328 m
Determine the [OH⁻] concentration in a 0.344 M Ca(OH)₂ solution.
Answer:
[tex]0.688M[/tex]
Explanation:
Hello,
In this case, it is widely acknowledged that strong bases usually correspond to those formed with metals in groups IA and IIA which have relatively high activity and reactivity, therefore, when they are dissolved in water the following dissociation reaction occurs (for calcium hydroxide):
[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]
In such a way, for the same volume, we can compute the concentration of hydroxyl ions by simple stoichiometry (1:2 molar ratio):
[tex]0.344\frac{molCa(OH)_2}{L}*\frac{2molOH^-}{1molCa(OH)_2} \\\\0.688\frac{mol OH^-}{L}[/tex]
Or simply:
[tex]0.688M[/tex]
Regards.
An electrode has a negative electrode potential. Which statement is correct regarding the potential energy of an electron at this electrode?
A. An electron at this electrode has the same potential energy as it has at a standard hydrogen electrode.
B. An electron at this electrode has a lower potential energy than it has at a standard hydrogen electrode.
C. An electron at this electrode has a higher potential energy than it has at a standard hydrogen electrode.
Answer:
C. An electron at this electrode has a higher potential energy than it has at a standard hydrogen electrode.
Explanation:
The standard hydrogen electrode (SHE) is used to measure the electrode potential of substances. The standard hydrogen electrode is arbitrarily assigned an electrode potential of zero. Recall that electrode potentials are always measured as reduction potentials in electrochemical systems.
For an electrode that has a negative electrode potential, electrons at this electrode have a higher potential energy compared to electrons at the standard hydrogen electrode. Electrons flow from this electrode to the hydrogen electrode.
On the other hand, a positive electrode potential implies that an electron at this electrode has a lower potential energy than it has at a standard hydrogen electrode. Hence electrons will flow from the standard hydrogen electrode to this electrode.
For a given sample of C3H8(g), the enthalpy change during the reaction is -784kJ. How many grams of CO2 are produced? Group of answer choices g
Answer:
[tex]m_{CO_2}=46.6gCO_2[/tex]
Explanation:
Hello,
In this case, considering the combustion of propane:
[tex]C_3H_8(g)+5O_2(g)\rightarrow 3CO_2(g)+4H_2O(g)\ \ \ \Delta _CH=-2220.0 kJ/mol[/tex]
We can compute the burnt moles of propane as shown below:
[tex]n=\frac{-784kJ}{-2220.0 kJ/mol} =0.353molC_3H_8[/tex]
Then, by noticing propane and carbon dioxide are in a 1:3 molar ratio, we can compute the grams carbon dioxide by using the shown below stoichiometric procedure:
[tex]m_{CO_2}=0.353molC_3H_8*\frac{3molCO_2}{1molC_3H_8} *\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=46.6gCO_2[/tex]
Best regards.
Calculate the work (kJ) done during a reaction in which the internal volume expands from 28 L to 51 L against an outside pressure of 4.9 atm.
Answer:
W= -11KJ
Explanation:
Given:
volume expands from 28 L to 51 L
pressure =4.9 atm.
We will need to Convert the pressure to Pascal SI
But 1 atm = 101,325 Pa.
Then,
Pressure= (4.9*101323)/1atm = 5*10^5 pa
Then we need to Convert the volumes to cubic meters
But we know that1 m³ = 1,000 L.
V1= 28L * 1m^3/1000L = 0.028m^3
V2=51L × 1m^3 /1000L =0.051m^3
The work done during the expansion of a gas can be calculated as
W= -P(V2-V1)
W= - 5*10^5(0.051m^3 - 0.028m^3)
W= -1.1× 10^4J
Then we can Convert the work to kiloJoule
But1 kJ = 1,000 J.
W= -1.1× 10^4J× 1kj/1000J
= -11KJ
How does the carbon calculator estimate the amount of CO2 that each individual releases into the atmosphere?
Answer:
The calculator add the CO2 released from the use of electricity, released from driving and the CO2 from the waste that we disposed.
Explanation:
The carbon dioxide, CO2 is what the human body does not need, therefore, we breathe it out, hence taking in oxygen(respiration process). The plants need oxygen for the production of their own food.
The carbon calculator estimate the amount of CO2 that each individual releases into the atmosphere through the consideration of several factors such as the kind of food that we eat.
Therefore, if we are to use the carbon calculator to determine the amount of CO2 that each individual releases into the atmosphere we will have:
The amount of CO2 that each individual releases into the atmosphere =( CO2 released from the use of electricity) + (CO2 released from driving) + (the CO2 from the waste that we disposed).