Answer:
Time = 43.88 seconds
Explanation:
Given the following data;
Speed = 2.5 m/s
Distance = 109.7 m
To find the time it would take to run the length of a standard football field, we would use the following formula;
[tex]Speed = \frac{distance}{time}[/tex]
Making time the subject of formula, we have;
[tex]Time = \frac{distance}{speed}[/tex]
Substituting into the formula, we have;
[tex]Time = \frac{109.7}{2.5}[/tex]
Time = 43.88 seconds
Therefore, it would take a tiger beetle 43.88 seconds to run the length of a standard football.
It takes 5000 J of work to lift a crate to a height of 5 m in 10 s of time.. Calculate the power.
Answer:
P = 500 W
Explanation:
Given that,
Work done to lift a crate to a height of 5 m is 5000 J
It takes 10 s
We need to find the power of the crate. We know that power is the rate of doing work. Mathematically, it can be given by :
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{5000}{10}\\\\P=500\ W[/tex]
So, the power of the crate is equal to 500 W.
A researcher is trying to identify whether household substances are basic. Which approach would BEST help the researcher
investigate whether substances are basic?
A. Test each substance with red litmus paper.
B. Test each substance with blue litmus paper.
C. Observe each substance and record its color.
D. Mix each substance with a weak base and record the results.
Answer:
a
Explanation:
because red litmus paper turn blues under base or alkaline condition
discuss impact of Newton's second law on roads
Answer:
The second law: When a force is applied to a car, the change in motion is proportional to the force divided by the mass of the car. This law is expressed by the famous equation F = ma, where F is a force, m is the mass of the car, and a is the acceleration, or change in motion, of the car
In the system shown above, the pulley is a uniform disk with a mass of .75 kg and a radius of 6.5 cm. The coefficient of friction between the 5.8 kg mass and the horizontal surface is .25, and the ropes does not slip on the pulley. They system is released from rest. Use work-energy principles to determine the kinetic energy of the (a) 2.8 kg mass and (b) the pulley after the 5.8 kg mass has moved 2.2 meters.
Answer:
i am answering the same question 3rd time
please find the answer in the images attached.
There are some ways objects in motion are affected. _______________, or pushes and pulls, affect the motion of an object. _______________ is a force that pulls objects down to Earth. _______________ is a force that slows things down or can even make them stop. Did you know acceleration means more than the increase of an object’s speed? It also describes an object that is slowing down or changing _______________. Since acceleration is a change in speed or direction, that means, _______________ is a change in velocity
Answer:
Forces, Gravity, Friction, Direction, Acceleration.
The answers for the fill-in-the-blanks would be Force, gravity friction
direction and acceleration respectively.
What is gravity?It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another,
There are a few ways that moving objects are impacted. Pushes and pulls, or force, have an impact on how an object moves.
The force of gravity drags items toward the Earth.
Friction is a force that causes objects to move more slowly or even come to a stop.
It also applies to an item that is reversing course or slowing down. Since acceleration is a change in velocity, it can also be a change in speed or direction.
Thus, Force, gravity friction direction, and acceleration are the answers respectively.
Learn more about gravity from here,
brainly.com/question/4014727
#SPJ2
Which is one-dimensional
A.
acceleration
B.
all of them
C.
speed
D.
velocity
Answer:
B
Explanation:
They are all one-dimensional
What are tectonic plate boundaries?
A areas where Earth’s core experiences a high amount of stress
B areas where Earth’s core experiences a low amount of stress
C areas where Earth’s crust experiences a high amount of stress
D areas where Earth’s mantle experiences a high amount of stress
Answer:
c
Explanation:
Answer:
Areas where earth crust experiences a high amount of stress
Explanation:
FCAT review question
A person starts running from 2 m/s to 6 m/s in 2 seconds.
Calculate the person's acceleration.
Var
Variables:
Solve:
F
Formula:
Answer:
2 m/s²
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 2 m/s
Final velocity (v) = 6 m/s
Time (t) = 2 s
Acceleration (a) =?
The acceleration of the person can be obtained as follow:
v = u + at
6 = 2 + (a×2)
6 = 2 + 2a
Collect like terms
6 – 2 = 2a
4 = 2a
Divide both side by 2
a = 4 / 2
a = 2 m/s²
Therefore, the acceleration of the person is 2 m/s²
In regions of the cardiovascular system where there is steady laminar blood flow, the shear stress on cells lining the walls of the blood vessels is about 20 N / M2. If the shear strain is about 0.008, estimate the shear modulus for the affected cells.
Answer:
Shear Modulus = 2500 Pa = 2.5 KPa
Explanation:
The shear modulus is defined as the ratio between the shear stress and the shear strain. Hence, the shear modulus, in this case, can be calculated by the use of the following formula:
[tex]Shear\ Modulus = \frac{Shear\ Stress}{Shear\ Strain}\\[/tex]
we have,
shear stress = 20 N/m²
shear strain = 0.008
Therefore,
[tex]Shear\ Modulus = \frac{20\ N/m^2}{0.008}\\\\[/tex]
Shear Modulus = 2500 Pa = 2.5 KPa
IF ITS RIGHT YOU WILL GET 5 STARS AND A BRAINLY WITH A LIKE
Answer:
DNA IS SMALLEST
NUCLEUS IS BIGGEST
PLEASE MARK BAiniRINIiEST
What is a mechanical advantage?
Answer:
B
Explanation:
A Mechanical Advantage is when you use a piece of machinery to help you do work, and it is an easy advantage.
You are playing baseball and hit a single, running to first base. Your distance and displacement are
Answer choices:
A. Both 90 feet
B. Both 0 feet
C. Distance 90 feet Displacement 0 feet
D. Distance 0 feet Displacement 90 feet
Answer:
C. Distance 90 feet Displacement 0 feet
a bullet of mass 120g is fired horizontally into a fixed wooden block with a speed of 20m\s. The bullet is brought to rest in a wooden block in 0.1secs by a constant resistance
calculate the;(I) magnitude of the resistance
(ii) distance moved by the bullet in the wood
Answer:
1) F = 24 N
2) Distance = 1 m
Explanation:
We are given;
Mass; m = 120 g = 0.12 kg
Initial velocity; u = 20 m/s
Final velocity; v = 0 m/s since it came to rest.
Time; t = 0.1 s
We can calculate acceleration from Newton's first equation of motion;
a = (v - u)/t
a = (0 - 20)/0.1
a = -200 m/s²
1) magnitude of the resistance will be;
F = ma
F = 0.12 × (-200)
F = -24 N
Since, we are dealing with the magnitude, we will take the absolute value. Thus, F = 24 N
2) To find the distance moved by the bullet, we know that;
Distance = Average speed × time
Thus;
Distance = ((v + u)/2) × t
Distance = ((0 + 20)/2) × 0.1
Distance = 1 m
calculate the magnitude of distance and displacement of a body moving in a complete circle
Answer:
Total distance = 2πr
Total displacement = 0
Explanation:
To Calculate the magnitude of distance and displacement of a body moving in a complete circle, we must come to these facts that:
The distance = circumference of the circle which is equal to the product of 2 ,pi and radius r
That is
Circumference = 2πr
Since velocity is changing and not constant, it is a vector quantity. Likewise displacement is a vector quantity.
The total displacement will be equal to zero.
Therefore, total distance is equal to the circumference of a circle while total displacement is equal to zero.
What is the momentum of a 4 kg object moving west at 4 m/s?*
O 12 kg*m/s (east)
O 1.33 kg*m/s (west)
O 16 kg*m/s (east)
16 kg*m/s (west)
Answer:
16kg*m/s west
Explanation:
P=M*V
Momentum= Mass time velocity, plug it into the formula,
M is 4 and V is 4, 4*4=16, and since the object is moving west its going to be west.
basically saying in simpler terms,
16=4*4
Given equal time periods, which statement about radioactive waste is correct?
A. Radioactive decay and nuclear fission always generate the same amount of waste.
B. Nuclear fusion generates less radioactive waste than radioactive decay does.
C. Nuclear fusion generates less radioactive waste than nuclear fission does.
D. Nuclear fission generates less radioactive waste than radioactive decay does.
how can we improve natural resources
Answer:
reduce, reuse, and recycle paper,plastic, electricity, glass, fiber
A microphone is attached to a spring that is suspended from the ceiling, as the drawing indicates. Directly below on the floor is a stationary 375-Hz source of sound. The microphone vibrates up and down in simple harmonic motion with a period of 1.80 s. The difference between the maximum and minimum sound frequencies detected by the microphone is 2.75 Hz. Ignoring any reflections of sound in the room and using 343 m/s for the speed of sound, determine the amplitude (in m) of the simple harmonic motion.
Answer:
[tex]0.361\ \text{m}[/tex]
Explanation:
[tex]f_s[/tex] = Frequency of source = 375 Hz
[tex]\Delta f[/tex] = Difference between the maximum and minimum sound frequencies = 2.75 Hz
v = Speed of sound in air = 343 m/s
T = Time period = 1.8 s
[tex]v_m[/tex] = Maximum speed of the microphone
We have the relation
[tex]\Delta f=2f_s\dfrac{v_m}{v}\\\Rightarrow v_m=\dfrac{\Delta fv}{2f_s}\\\Rightarrow v_m=\dfrac{2.75\times 343}{2\times 375}\\\Rightarrow v_m=1.26\ \text{m/s}[/tex]
Amplitude is given by
[tex]A=\dfrac{v_mT}{2\pi}\\\Rightarrow A=\dfrac{1.26\times 1.8}{2\pi}\\\Rightarrow A=0.361\ \text{m}[/tex]
The amplitude of the simple harmonic motion is [tex]0.361\ \text{m}[/tex].
How do positive and negative acceleration differ?
Positive acceleration represents an object speeding up; negative acceleration represents an object slowing down.
Positive acceleration moves north or east; negative acceleration moves south or west.
Positive acceleration occurs when there is more velocity than speed; negative acceleration occurs when there is less velocity than speed.
Positive acceleration occurs when an object changes its speed but not its direction; negative acceleration occurs when an object changes both its speed and direction.
Answer:
acceleration
Explanation:
acceleration determines whether you will be adding to or subtracting from the velocity. while negative acceleration means you will subtract from the current value of the velocity and a positive acceleration means you will add
Question 4 of 25
Which statement correctly compares nuclear fission with nuclear fusion?
A. Nuclear fission forms a larger nucleus, and nuclear fusion forms
smaller nuclei.
B. Nuclear fission uses a common isotope, and nuclear fusion uses a
rare isotope.
C. Nuclear fission reactions demonstrate the conservation of atomic
number, and nuclear fusion reactions do not.
D. Both nuclear fission and nuclear fusion produce energy from
matter
Help please
Answer:
Both nuclear fission and nuclear fusion produce energy from
matter
:D
Both nuclear fission and nuclear fusion produce energy from matter is the statement correctly comparing nuclear fission with nuclear fusion.
What is nuclear fusion?The process by which two or more tiny nuclei unite to generate a bigger nucleus is known as a nuclear fusion reaction.
The more energy it takes to liberate an electron from a smaller atom. This is referred to as binding energy.
As a result, when two little nuclei fuse together, there is more binding energy than when two big nuclei fuse together.
For example, the fusion of two hydrogen atoms produces more energy than the fusion of one helium atom, and surplus energy is expelled into space upon binding.
Both nuclear fission and nuclear fusion produce energy from matter is the statement correctly comparing nuclear fission with nuclear fusion.
Hence option D is correct.
To learn more about nuclear fusion refer to the link;
https://brainly.com/question/14019172
A car is traveling south at 70 miles per hour.
A.
acceleration
B.
velocity
C.
speed
D.
centripetal force
Answer:
velocity
Explanation:
velocity includes the direction taken by a person or object
particles q1, q2, and q3 are in a straight line. particles q1 = -5.00 x 10^-6 C, q2 = -5.00 x 10^-6 C. .5 between each what is the net force on q3
Answer:
1.12
Explanation:
Acellus
Answer: +1.12
Explanation:
This answer works for Acellus! :)
During sublimation and deposition, this state of matter is skipped:
A) Solid
B) gas
C) liquid
10. A jogger runs along a road for a distance of 2700 m. If it takes her 900 seconds
to run that distance, what is her speed?
Answer:
Speed = 3 m/s
Explanation:
Given the following data;
Distance = 2700m
Time = 900 s
To find the speed;
Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.
Mathematically, speed is given by the formula;
[tex]Speed = \frac{distance}{time}[/tex]
Substituting into the equation, we have;
[tex]Speed = \frac{2700}{900}[/tex]
Speed = 3 m/s
Does anyone know 19 and 20 ??
which process is the source of most oxygen in the atmosphere
Answer:
photosynthesis
The air that enters human lungs contains about 21 percent oxygen. The process responsible for producing most of the Earth's oxygen is known as photosynthesis. In this process, plants and certain other organisms convert sunlight into oxygen and other products.
Explanation:
Hope it helps! Correct me if I am wrong!
I'm sure about my answer!
If you dont mind can you please mark me as brainlest?
Its ok if you don't want to!
But i hopefully it helps you!
Answer:
Photosynthesis I think
Explanation:
A system releases 150 kJ of heat while 10 kJ of work is done on the system by
the surroundings. Calculate the change in internal energy (in kJ).
Answer:
160J OR 140J
Explanation:
Depends on teacher which formula your teacher uses.
U=Q+W OR U=Q-W
Method 1:
U=150+10J=160
U=150-10=140J
A 100 N force is applied to move an object a horizontal distance of 5 meters at constant speed in 10 seconds. How much power is done?
The power used when a 100 N force is applied to move an object through a distance of 5 m at constant speed in 10 seconds is 50 W
We'll begin by calculating the energy. This can be obtained as follow:
Force (F) = 100 N
Distance (s) = 5 m
Energy (E) =?E = F × s
E = 100 × 5
E = 500 JFinally, we shall determine the power. This can be obtained as follow:
Energy (E) = 500 J
Time (t) = 10 s
Power (P) =?[tex]P = \frac{E}{t}\\\\P = \frac{500}{10}[/tex]
P = 50 WTherefore, the power used in moving the object is 50 W.
Learn more:
https://brainly.com/question/24817638
Two objects collide. One of the objects deforms upon collision. What type of collision is this?
Select one:
A: Elastic collision, because energy is used to defom the object.
B: Inelastic collision, because energy is conserved.
C: Inelastic collision, because kinetic energy was lost when the object was deformed.
D: Elastic collision, because momentum is conserved.
Answer:
D Elastic collision because momentum is conserved
Explanation:
this is the answer may i be marked brainliest?
Explain how energy that comes from the outside of the Earth system drives the flow of water on surface currents.
Answer:
The ocean and atmosphere are connected. They work together to move heat and fresh water across the globe. Wind-driven and ocean-current circulations move warm water toward the poles and colder water toward the equator. ... The majority of the thermal energy at the Earth's surface is stored in the ocean.
Explanation:
The ocean and atmosphere are connected. They work together to move heat and fresh water across the globe. Wind-driven and ocean-current circulations move warm water toward the poles and colder water toward the equator. ... The majority of the thermal energy at the Earth's surface is stored in the ocean.