Answer:
chemical bonds
Explanation:
The atoms in chemical compounds are held together by attractive electrostatic interactions known as chemical bonds. Ionic compounds contain positively and negatively charged ions in a ratio that results in an overall charge of zero. The ions are held together in a regular spatial arrangement by electrostatic forces.
The isomerization reaction, ch3nc → ch3cn, is first order and the rate constant is equal to 0.46 s-1 at 600 k. what is the concentration of ch3nc after 7.0 seconds if the initial concentration is 0.30 m?
Answer:
y=meme3squared
Explanation:
YEEEEEEEEEEEEEEEE
An acid of known strength, HA, is used in a titration to determine the concentration of a solution of NaOH. What ions are present in the flask at the equivalence point?
Answer:
Na+ And A-
Explanation:
Answer: Na + and A-
Explanation:
What is the volume of a 5.00 molar solution containing 20 moles of 0.40 10.0L 0.010L
Answer:
Volume of solution = 4 liter
Explanation:
Given:
Molarity = 5 M
Number of moles = 20 moles
Find:
Volume of solution
Computation:
Moles of solute mixed per litre of solution is known as molarity. A 1 M sample is the one in which 1 molecule of solvent is soluble in one liter of solution volume.
M = Mol / L
5 = 20 / L
Volume of solution = 4 liter
A study was created to test the effects of fear in children. The hypothesis of the experimenters was that if babies were exposed to fuzzy bunnies and at the same time a loud cymbal was struck close behind them, then that child would be afraid of all fuzzy things. Another group of children would be exposed to bunnies without any loud noises. The study was carried out as planned and as a result, hundreds of young children developed fear of all cute furry bunny rabbits.
Dependent Variable: ______________________
Control Group: ____________________________
Independent Variable: _____________________
Experimental Group: _______________________
Answer:
Dependent variable: the children's fear of rabbits
Control: the group that was NOT exposed to loud noises
Independent variable: the loud noises
Experimental Group: the group that was exposed to loud noises
Click on an olive tree and read about it. Based on what you read, do you think the climate of Barcelona is very wet or rather dry? Explain.
Answer:
In the Autumn, Spring, and Winter, It is wet. In the Summer it is dry.
Explanation:
Which example is a mixture? alcohol water mercury orange soda
Answer:
water is an example of mixture
need help i only have 5 more minutes left
Answer:
Bleach, seawater, blood, water, coffee, orange, lemon
Explanation:
The pH is a measurement in chemistry defined as the -log [H⁺]. pH is used in quality control of materials. The pH is a scale from 1 (Acids) to 14 (Bases). The pH of 7 is for neutral solutions
Based on the information of the image, the most basic is bleach, then the seawater, the blood, water (Neutral), coffee, orange and, the most acidic is lemon.
The order is:
Bleach, seawater, blood, water, coffee, orange, lemonWhat scientifically goes on with a plasma ball?
Answer:
the electrode at the center of a plasma ball emits a high-frequency,high-voltage alternating electric current. This current flows through the plasma filaments to create colorful tendrils of light.
Explanation:
what colors depend upon the gases used inside the plasma ball? common gases include neon, argon, xenon, and krypton.
Which cross section below best shows the locations of high air pressure and low air pressure near a beach on a hot, sunny, summer afternoon?
Locations of high air pressure is the beach whereas the location of low air pressure is in the sea on a hot, sunny, summer afternoon.
Where is low and high air pressure exists?Areas where the air is warmed have lower pressure because the warm air rises in the air. These areas are known as low pressure systems. Places where the air pressure is high, are called high pressure systems. These are places where air is cold.
So we can conclude that Locations of high air pressure is the beach whereas the location of low air pressure is in the sea on a hot, sunny, summer afternoon.
Learn more about pressure here: https://brainly.com/question/25736513
#SPJ1
Can somebody please help me!!
Answer:
acceleration
pls dont report me
Section I: Experimental Overview
Provide background information.
Include the hypothesis(es).
Summarize the procedures.
Section II: Data and Observations
Summarize the data you collected in the lab guide.
Include information from data tables.
Include any written observations that are relevant.
Section III: Analysis and Discussion
Discuss any important calculations or formulas used.
Identify key results, what the results indicate, and any trends in the data.
Include graphs (if constructed) that display trends in the data.
Provide possible reasons for any problems with the experiment, or unexpected data.
Section IV: Conclusions
Identify if the hypothesis(es) was (were) supported or refuted.
Provide logical reasoning based on data.
Explain how the experiment could be improved.
To help you write your lab report, you will first answer the questions listed below by reflecting on the experiment you have just completed. Then you will use the answers to these questions to write the lab report that you will turn into your teacher.
You can upload your completed report with the upload tool in formats such as , Microsoft Word, or PDF. Alternatively, your teacher may ask you to turn in a paper copy of your report or use a web-based writing tool.
Questions
Section I: Experimental Overview
What is the purpose of the lab, the importance of the topic, and the question you are trying to answer?
What is your hypothesis (or hypotheses) for this experiment?
What methods are you using to test this (or each) hypothesis?
Section II: Data and Observations
Locate the data and observations collected in your lab guide. What are the key results? How would you best summarize the data to relate your findings?
Do you have quantitative data (numerical results or calculations)? Do you have qualitative data (written observations and descriptions)? How can you organize this date for your report?
Section III: Analysis and Discussion
What do the key results indicate?
If you constructed graphs, what trends do they indicate in your data?
Answer:
If you constructed graphs, what trends do they indicate in your data?
Without using the value of So, predict the sign for
a) 2K(s) + F2(g) → 2KF(g)
b) NaClO3(s) → Na+(aq) + ClO3-(aq)
c) 2NO(g) + O2(g) → 2NO2(g)
d) H2S(g) + O2(g) → S8(s) + H2O(g)
Answer:
a) 2f
B)CIO3+na
c)2NO2(g)
d)HSO3(h)
Explanation:
The sign of entropy depends on the number of gaseous substance in the system. In the first reaction, the number of gaseous particles increase in the product hence, randomness increases and thereby entropy is positive.
What is entropy ?Entropy is a thermodynamic quantity which measures the randomness of the system. As the disorder in the system increases, the entropy increases and the entropy change is said to be positive in sign.
In the first reaction, in the product side, 2 moles of gaseous substance is formed, which increases the randomness, hence, entropy change is positive.
In the second reaction, the more ordered solid state is getting into less ordered aqueous state. Hence, S is positive.
For the third reaction, the number of moles of gas decreases from 3 to 2. Hence S is negative. For the last reaction, there is no change in number of moles or state of substance and no change in S.
Find more on entropy:
https://brainly.com/question/13135498
#SPJ3
3.
Balance the following reactions.
i)
Mg +
HCI →
MgCl2 +
H2
ii)
Mg(OH)2 +_
HCI →
MgCl2 +
H20
AgNO3 +
K3PO4 →
Ag3PO4 +
KNO3
iv)
H2SO4 +
Pb(OH)4 →
Pb(SO4)2 +
H2O
v)
Ca (OH)2 +
H3PO4 →
Ca3(PO4)2 +
H20
Answer: i) [tex]Mg+2HCl\rightarrow MgCl_2+H_2[/tex]
ii) [tex]Mg(OH)_2+2HCl\rightarrow MgCl_2+2H_2O[/tex]
iii) [tex]3AgNO_3+K_3PO_4\rightarrow Ag_3PO_4+3KNO_3[/tex]
iv) [tex]2H_2SO_4+Pb(OH)_4\rightarrow Pb(SO_4)_2+4H_2O[/tex]
v) [tex]3Ca(OH)_2+2H_3PO_4\rightarrow Ca_3(PO_4)_2+6H_2O[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The balanced chemical reactions will be:
i) [tex]Mg+2HCl\rightarrow MgCl_2+H_2[/tex]
ii) [tex]Mg(OH)_2+2HCl\rightarrow MgCl_2+2H_2O[/tex]
iii) [tex]3AgNO_3+K_3PO_4\rightarrow Ag_3PO_4+3KNO_3[/tex]
iv) [tex]2H_2SO_4+Pb(OH)_4\rightarrow Pb(SO_4)_2+4H_2O[/tex]
v) [tex]3Ca(OH)_2+2H_3PO_4\rightarrow Ca_3(PO_4)_2+6H_2O[/tex]
Which has greater heat capacity—iron, tin, or bismuth? Why do you say this?
Answer:
Bismuth, because when three cubes of the same mass were heated and dropped into the same temperature water, the water the bismuth cube was dropped in heated up much less than the water with iron or tin.
REWRITE THIS IN YOUR OWN WORDS PLEASE, THANK YOU.
Credits to: www.generationgenius.com › wp-content › uploads
The greatest heat capacity is possessed by iron.
The heat capacity of materials increases as the number of particles in the material or density of the material increases.
This means that the denser a material is, the higher its heat capacity because it has more particles that absorbs heat.
The heat capacity is the quantity of heat required to raise the temperature of 1 gram of a material by 1°C.
The heat capacities of iron, tin and bismuth are: 0.45 J/g °C, 0.213 J/g °C and 0.123 J/g °C.
This follows from the decreasing densities of the metals in the order; iron > tin > bismuth.
Hence iron has the greatest heat capacity among the three elements.
Learn more: https://brainly.com/question/1453843
Encountering problems during separation/purification is a very common issue in organic synthesis, but these steps are crucial to isolate your desired product.
a. True
b. False
11. Which of the following elements CANNOT violate the octet rule?
a.
Nitrogen
b. Phosphorus
c. Sulfur
d. lodine
Answer:
I think it's Nitrogen is right answer
Please help it’s for 100 points
Has your cell phone ever not had enough battery when you really needed it? What did you do?
Answer:
Yes
Explanation:
There are some times when I will need my cell phones but it will have not battery. At this point, I look for a means to charge it or I could probably use power bank to charge. I always have an extra battery, so when the other battery is flat, I will replace it with the second charged one. But when both batteries are flat, I will look for a means to charge it using generator or wait till I have access to power supply.
Organelles that use energy from sunlight to produce food are called mitochondria
O True
O False
Answer:
Organelles that use energy from sunlight to produce food are called mitochondria.
False
What occurs during a decomposition reaction?
Answer:
Hello
The chemical bonds between the atoms of the decomposing compound are broken, and then rearranged between the atoms in new ways to make the products.
Explanation:
The chemical bonds between the atoms of the decomposing compound break, and new substances are formed as new chemical bonds form between the atoms of the elements of the decomposed compound.
Have a nice day!A company claims that its weight-loss product is the safest. Why might this
be a biased claim?
A. The company is trying to get you to buy its product.
B. The company has lots of scientific information about the product
C. The company is very successful.
D. The company has studied the product more than anyone.
why does oxygen and carbon dioxide travel within the seed and the egg
Why does the cake and pan feel different to your hand when you take them out of the oven? Explain
Answer:
bcs the oven heated it up?
Explanation:
1.2 What type of bonding occurs when hydrogen form a diatomic molecule?
Answer:
I think it is covalent bonding...
Explanation:
The bonding is covalent in homonuclear diatomic molecules. Each atom in the molecule has the same electronegativity, which means electrons are shared equally between the two. The electronegativity of the atoms in heteronuclear diatomic molecules varies, and these molecules have polar covalent bonds. A dipole is formed when a molecule interacts with another molecule. (i think it's covalent bonding but i might be wrong)
hope this helps...
explain hydrophobic and hydrophylic
Answer:
hydrophobic: tending to repel or fail to mix with water.
hydrophylic: having a tendency to mix with, dissolve in, or be wetted by water.
Hope it helps!!!
different between intermolecular and intra molecular dehydration
Which statement describes a reason scientists predict that carbon dioxide emissions will increase over the next few decades? Choose the correct answer.
The use of geothermal energy is increasing.
Fossil fuels are being replaced with renewable energy sources.
Increased carbon dioxide in the atmosphere can lead to a loss of biodiversity.
Many countries are undergoing an increase in technology and standard of living.
Answer:
Many countries are undergoing an increase in technology and standard of living.
Explanation:
The statement describes a reason scientists predict that carbon dioxide emissions will increase over the next few decades is many countries are undergoing an increase in technology and standard of living. Therefore, option D is correct.
What increases carbon dioxide emissions?The main contributor to the rising carbon dioxide concentrations in the atmosphere is human activity, specifically the burning of fossil fuels like coal, oil, and gas, as well as deforestation.
Coal and oil emissions are expected to be higher than they were in 2021, with oil accounting for the majority of the increase in overall emissions.
The delayed recovery of international aviation following COVID-19 pandemic limitations accounts for a major portion of the increase in emissions from burning oil.
Greenhouse gases have far-ranging environmental and health effects. They make climate change by trapping heat, and they also impart to respiratory disease from smog and air pollution.
Thus, option D is correct.
To learn more about the carbon dioxide emissions, follow the link;
https://brainly.com/question/14275614
#SPJ6
Does all of the liquid water in the atmosphere fall as rain? Why or why not?
A 31.0 mL sample of 0.624M perchloric acid is titrated with a 0.258M sodium hydroxide solution.
What is the (H+) molarity after the addition of 15.0 mL of KOH?
Answer:
0.0922 M
Explanation:
The problem first states that the titration is made using NaOH, and later asks about the addition of KOH. I'm going to assume NaOH was used throughout the whole problem. The result does not change if it was KOH instead.
The reaction that takes place is:
HClO₄ + NaOH → NaClO₄ + H₂OFirst we calculate how many HClO₄ moles are there in the sample, using the given molarity and volume:
0.624 M * 13.0 mL = 8.11 mmol HClO₄Then we calculate how many NaOH moles were added:
0.258 M * 15.0 mL = 3.87 mmol NaOHNow we calculate how many HClO₄ remained after the reaction:
8.11 - 3.87 = 4.24 mmol HClO₄As HClO₄ is a strong acid, 4.24 mmol HClO₄ = 4.24 mmol H⁺
Finally we calculate the molarity of H⁺, using the calculated number of moles and final volume:
Final volume = 31.0 mL + 15.0 mL = 46.0 mL4.24 mmol / 46.0 mL = 0.0922 MThe state of matter in which a material has definite shape and definite
volume is the
Answer:
It's a solid.
Explanation:
Solids never change their shape as opposed to gases and liquids. This is because their molecules are tightly packed together. Since all solids have a definite shape, it's volume will also be definite.
An orgo lab student named Bob wanted to synthesize an isoamyl acetate ester because it smells like bananas and he really likes to sniff it. He heated 7.50 grams of isoamyl alcohol (3-methyl-1-butanol) with 22.5 grams of acetic acid (ethanoic acid) and 4.50 grams of sulfuric acidto prepare his favorite ester. Based on these numbers, how many grams of isoamyl acetateshould he theoretically obtain
Answer:
The answer is "11.07 g".
Explanation:
Isoamyl alcohol is a reagent restriction
Isoamyl alcohol Moles:
[tex]= \frac{7.5}{88.15} \\\\ =0.085[/tex]
Moles only with the shape of isoamyl acetate are equivalent to numbers.
Isoamyl acetate grams:
[tex]= 0.085 \times 130.19\\\\ = 11.07 \ g[/tex]