At which type of tectonic plate boundary is a volcano least likely to occur?

Answer:

Gases, liquids and solids are all made up of atoms, molecules, and/or ions, but the behaviors of these particles differ in the three phases. ... gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.

Answer and Explanation:

Dipole-Dipole interactions are weaker than hydrogen bonds.

Hydrogen bonds are a form of dipole-dipole interactions, being the strongest form of dipole-dipole interactions.

#teamtrees #PAW (Plant And Water)

Answer:

Answer is C

Explanation:

the valency of sulphur is 2 ans sodium is 1

by crossing it forms NA2S

Answer:

it is less dense than oxygen gas.

Explanation:

Hydrogen is the simplest chemical element that exists. The symbol for the chemical element Hydrogen is "H" and it is a colourless, tasteless, odorless, and highly flammable gas.

Hydrogen is a chemical element found in group (1) of the periodic table and as such it has one (1) electrons in its outermost shell. Therefore, Hydrogen has an atomic number of one (1) and a single valence electrons because it has only one proton and one electron in its nucleus.

In Chemistry, the properties of a chemical element that can be observed and measured without changing its chemical nature is known as a physical property. It includes density, color, freezing point, opacity, smell, melting point, viscosity, etc.

Hence, the statement which describes a physical property of hydrogen is that it is less dense (density) than oxygen gas.

Explanation:

Chemical fertilizers raise crop yields, but their heavy usage has hardened the soil, diminished fertility, reinforced pesticides, contaminated air and water, and emitted greenhouse gases, posing health and environmental risks.

Answer:

6 N.

Every thing has equal and opposite reaction.

Answer:

The answer is C I believe, I do not know for sure but I think that is the answer..

I'm sorry if I'm wrong.

Explanation:

Answer:

yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use

Answer:

alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.

Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.

Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.

dnt learn all thr properties.

these are the main properties..u can learn thse only. hope it will help u

Answer:

The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]

Explanation:

An electron has an acceleration of 2.33*10² [tex]\frac{m}{sec^{2} }[/tex]

To be able to express in units [tex]\frac{m}{min^{2} }[/tex], you must carry out the conversion taking into account that 1 [tex]\frac{m}{sec^{2} }[/tex]= 3600 [tex]\frac{m}{min^{2} }[/tex]. Then you can apply the following rule of three: if 1 [tex]\frac{m}{sec^{2} }[/tex] equals 3600 [tex]\frac{m}{min^{2} }[/tex], 2.33 * 10² [tex]\frac{m}{sec^{2} }[/tex] equals how much [tex]\frac{m}{min^{2} }[/tex]?

[tex]\frac{m}{min^{2} }=\frac{2.33*10^{2} \frac{m}{sec^{2} }*3600\frac{m}{min^{2} }}{1\frac{m}{sec^{2} }}[/tex]

[tex]\frac{m}{min^{2} }=838800[/tex]

The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]

Answer:

cell wall and chloroplasts

Explanation:

Answer:

Minerals can form in three primary ways being precipitation, crystallization from a magma and solid- state transformation by chemical reactions (metamorphism). Mineral Precipitation is when a mineral is formed by crystallization from a solution. Examples include quartz, halite (table salt), calcite, and gypsum.

Answer:

When magma cools slowly, deep below the surface, it has time to form large crystals in regular patterns. The second way that minerals form is through solutions. (A solution is when one substance is dissolved uniformly in a liquid.) When elements and compounds leave the solution, they can crystalize.

Answer:

The elements of the same group have the same number of valence electrons, that is why they have similar properties

Answer:

The third one!

Answer:

There are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

Explanation:

One mole of a substance contains 6.02 × 10²³ particles

One mole of sulphur atom contains 6.02 × 10²³ atoms

Number of moles of sulphur present in 3.0 × 10²¹ atoms = 3.0 ×10²¹/6.02 10²³

Number of moles of sulphur atom = 0.00498 moles of sulphur atom

The mole of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.

Molar mass of sulphur atom = 32 grams per mole (g/mol)

Mass of 0.00498 moles of sulphur atom = 0.00498 moles × 32 g/mol

Mass of sulphur = 0.16 g

Therefore, there are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

Answer:

The volume of solution in liters required to make a 0.250 M solution from 3.52 moles of solute is 14.08 liters of solution

Explanation:

The question relates to the definition of the concentration of a solution which is the number of moles per liter (1 liter = 1 dm³) of solution

Therefore we have;

The concentration of the intended solution = 0.250 M

Therefore, the number of moles per liter of the required resolution = 0.250 moles

Therefore, the concentration of the required solution = 0.250 moles/liter

The volume in liters of the required solution that will have 3.52 moles of the solute is given as follows;

The required volume of solution = The number of moles of the solute/(The concentration of the solution)

∴ The required volume of solution = 3.52 moles/(0.250 moles/liter) = 14.08 liters

The required volume of solution to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.

Therefore the number of liters required to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.

Answer:

The Earth would become cooler until it probably attains a new equilibrium between absorbed solar energy and emitted solar energy.

Explanation:

The earth's energy balance refers to the balance between the energy absorbed from the sun (solar radiation) and the emitted (thermal) energy leaving the Earth. This balance ensures that the earth's surface temperature remains fairly constant.

When energy from the sun reaches the earth, it is absorbed and used by various features of the earth which uses it for their energy needs. Eventually, any excess radiant energy is sent back or emitted from the earth back into space such that the balance between absorbed and emitted energy is maintained.

However, if there is an imbalance whereby more energy is emitted than is absorbed, this would result in the earth losing more heat than it receives. This would result in the earth becoming more significantly colder until it probably attains a new equilibrium between absorbed solar energy and emitted solar energy.

Answer:

D

Explanation:

When an atom loses an electron the number of electrons exceeds the number of protons. This means that the negative charge induced by the electrons exceeds the positive charge induced by the protons.

Answer:

-198.15

Explanation:

sorry if wrong form

Answer:

the answer is c I believe

Answer:

It can be brought into regular conversation easily I feel it means to "provoke" or "speeds significant change or action" I can see someone saying that in a conversation, "chlorine acts as a catalyst promoting the breakdown of ozone".

I would say it would take the same meaning depending on how you say it and when and what the context of what you're saying it in. 

For scientists, it means to change quickly. For someone who says it in a conversation may be saying to stop provoking someone. 

Explanation:

Answer:

The change of state that has occurred is from a gas to a liquid

Note: The question is incomplete. The complete question is given blow.

H₂O is initially present in a state where its molecules are far apart. During a change of state, its molecules slow down. Which change of state has most likely taken place?

from a gas to a liquid

from a liquid to a gas

from a solid to a liquid

from a gas to a plasma

Explanation:

Water can exists in three states: as gaseous water vapor, as liquid water, and as solid ice. Each of these states of water can be interconverted from one to another by the addition or removal of heat in a process known as change of state.

Liquid water can be converted to solid ice by the removal of heat, while solid ice ice can be converted to liquid water by the addition of heat. Also, liquid water can be converted to water vapor by the addition of heat, while water vapor can be converted to liquid water by the removal of heat.

Of the three states of water, the one in which the molecules are farthest apart is in the gaseous state. The molecules have high kinetic energy and move randomly while colliding with one another. When a heat is removed from these highly energetic molecules, the molecules slow down and lose some of their kinetic energy and a change of  occurs from gaseous to liquid state.

Therefore, the change of state that occurred as described, is from gas to liquid.

The plants are the part that absorb the Sun's light and heat.

The part of a food chain that absorbs the sun's light and heat is producers that are plants.

A food chain is the chain that shows the transfer of energy from one part to another.

The bottom of the food chain is the producers that make their own food, then the consumers and the decomposers.

Thus, the part of a food chain that absorbs the sun's light and heat is producers that are plants.

Learn more about food chain

https://brainly.com/question/16065961

#SPJ2

Answer:

1.79 moles

Explanation:

1.79 moles

1.79 moles

1.79 moles

1.79 moles

Answer:1.79 moles

1.79 moles are there in 100g of iron.

Explanation:

thats the answer for it

Answer:

honey

Coffee

blood

Explanation:

These components are uniformly distrubuted and these cannot be seperated unlike heterogeneous

Answer:

Explanation:

It's 21 /

Answer:

Rhodium-122 < Palladium-109 < Silver-109  <  Cadmium-106 < Indium-110

Explanation:

Atomic number - Number of protons.

The number displayed at the end of the element in this question represents the mass number (Number of protons + Number of neutrons).

The atomic number of the isotopes are given below;

Silver-109  --> 47

Cadmium-106  --> 48

Rhodium-122   --> 45

Indium-110   --> 49

Palladium-109  --> 46

Arranging in order of increasing atomic number from lowest to highest;

Rhodium-122 < Palladium-109 < Silver-109  <  Cadmium-106 < Indium-110

Answer:

if you want to protect our ozone depletion you have aerosol products that don't contain HCFCs and CFCs as stimulus or incitement

Explanation:

why you should use aerosol because when the liquid mixture is freeded or released from the aerosol the liquid propellant becomes a gas so this can easily break up the product into a fine haze or a mist hope its helpful have a good luck

Answer:

47.27 g HNO₃

Explanation:

The reaction between nitric acid (HNO₃) and calcium hydroxide (Ca(OH)₂) is the following:

2HNO₃(aq) + Ca(OH)₂(aq) → Ca(NO₃)₂ + 2H₂O(l)

According to the chemical equation, 2 moles of HNO₃ reacts with 1 mol of Ca(OH)₂. At the point of total neutralization, the total number of moles of  HNO₃ reacts with the total number of moles of Ca(OH)₂:

2 x moles HNO₃ = moles Ca(OH)₂

The number of moles is equal to the product of molarity of the solution (M) and the volume in liters (V):

M(HNO₃) = ?

M(Ca(OH)₂) = 0.73 M

V(HNO₃) = 25.00 mL x 1 L/1000 mL = 0.025 L

V(Ca(OH)₂) = 51.4 mL x 1 L/1000 mL = 0.0514 L

So, we can write the equation at neutralization point as:

2 x (M(HNO₃) x V(HNO₃)) = M(Ca(OH)₂) x V(Ca(OH)₂)

From this, we can calculate the molarity of HNO₃:

M(HNO₃) = (M(Ca(OH)₂) x V(Ca(OH)₂))/2 x V(HNO₃)

               = (0.73 M x 0.0514 L)/(2 x 0.025 L)

               = 0.75 M HNO₃

We can convert the molarity from M (mol/L) to g/L by using the molecular weight of HNO₃:

Mw(HNO₃) = 1 g/mol H + 14 g/mol N + (3 x 16 g/mol O) = 63 g/mol

Finally, we multiply the molarity by the molecular weight to obtain the grams of nitric acid per liter of solution:

0.75 mol/L HNO₃ x 63 g/mol = 47.27 g HNO₃

Answer:

5 mole of N2O : 112 litre of N2O

5 mole of N2O : 220 g of N2O

Then,

Density = mass/ volume

= 220/112

= 1.96 g per litre