at what speed does a 1600 kg compact car have the same kinetic energy as a 20000 kg truck going 24 km/h ? express your answer in kilometers per hour.

The string will extend when the object is moved to the right, applying a restoring force to bring the weight back to its equilibrium position. The string will compress if the object is pushed to the left, and it will then exert a restoring force to bring the thing back to its starting position.

The displacement diminishes as the mass comes closer to the equilibrium position, and as a result, the restoring force and acceleration both decrease. There is no restoring force once the mass has reached equilibrium.

The linear density of the string and the tension in the string both affect how quickly a wave moves along a string. A string's linear density is its mass per unit length. In general, a wave's speed is determined by the square root of the medium's elastic property to inertial property ratio.

The speed would be higher in the low linear mass density of the string because the speed of a wave on a string is inversely proportional to the square root of the linear mass density.

Know more about force:

brainly.com/question/388851

#SPJ1

An 8.0 lb blowing ball has a diameter of 8.5 inches. When lowered into water, this ball will sink.

The correct option is B.

The measure of how densely a material is packed together is called density.

It can be defined as the mass per unit volume.

Density Symbol: D or ρ

Density Formula: ρ = m/V, where ρ is the density, m is the mass of the object and V is the volume of the object.

Mass of the ball m=8lb

Radius of the ball r=8.5/2=4.25 inch=0.108m

Volume of the ball V=4/3[tex]\pi[/tex]r³=5.277 ×10⁻⁶m³

Density of the ball b = = 687.7 × 103 kg/m³

Density of water Pw 1 × 103 kg/m³

Since the density if the bowling ball is much larger than that of water, the ball will sink.

To know more about density:

https://brainly.com/question/952755

#SPJ4

The fraction of atmospheric pressure at sea level is 0.047.

The stress present in the Earth's environment is known as atmospheric pressure, commonly referred to as barometer strain. One zero one,325 Pa, also known as 1013.25 millibars, 760 mm Hg, 29.9212 inches Hg, or 14.696 psi, is the measure of stress used to describe the same old environment.

The atmospheric sea level is known as

P sea level = P atm = 1.01325 × 10^5 N/m^2

Now pressure at the bottom of empire state will be

P1 = 1.01325 × 10^5 N/m^2

Pressure at the top of empire state will be:

P2 = P1 - rho × g × h

rho = density of air = 1.29 kg/m^3

g = 9.81 m/sec^2

Given:

h = height of empire state = 380 m

P2 = 1.01325 × 10^5 - 1.29 × 9.81 × 380

P2 = 96516.138 N/m^2

So,

Delta P = P1 - P2 = 1.01325 × 10^5 - 96516.138

Delta P = 4808.862 N/m^2

So fraction will be:

N = Delta P / P sea level

N = 4808.862/1.01325 × 10^5

N = 0.04745 = 4.745 × 10^-2

Hence in two significant figures

N = 4.7 × 10^-2 = 0.047

To learn more about atmospheric pressure, visit:

https://brainly.com/question/1393320

#SPJ1

Earth’s acceleration toward the skydiver is much smaller than the acceleration of the skydiver

Define acceleration

Acceleration is the rate at which velocity, both in terms of speed and direction, varies over time. When anything moves faster or slower in a straight line, it is said to have been accelerated.

Your descent to the ground quickens as you plummet. This acceleration will keep going until the drag from her falling speed due to wind resistance equals the acceleration caused by gravity. He should keep accelerating downward because air resistance, also known as drag force, is usually far smaller than the normal force of a body. She will reach "terminal velocity" when these forces balance each other out, at which point she will stop accelerating.

He will thereafter fall at the same rate until he activates his chute, however his initial acceleration is brought on by acceleration due to gravity.

To know more about acceleration use link below:

https://brainly.com/question/460763

#SPJ4

The point that the axis of rotation passes through in the pencil of length 15.0 cm and mass 10.0 g is point B.

The free body diagram of the pencil that rotates about an axis perpendicular to the plane of the figure is shown in the image attached below.

N = Normal force

mg = Weight

C = Center of mass point

f = Frictional force

The weight of the pencil acts in vertically downward direction at the center of mass of the pencil, that is, at point C. Since, the pencil touches the surface at point B, the force due to weight of the pencil produces a torque and makes the pencil rotate about point B.

To know more about axis of rotation

https://brainly.com/question/21893931

#SPJ4

The entire trip is 480 miles.

How many miles is the entire trip?

Using Pythagoras theorem,

160²+120²= √40000 = 200

What is Pythagoras theorem?

In mathematics, the Pythagorean Theorem or Pythagorean Theorem is the fundamental relationship in Euclidean geometry between the three sides of a right triangle. It states that the area of ​​a square whose side is the hypotenuse (the side opposite the right angle) is equal to the sum of the areas of the squares on the other two sides. This theorem can be written as an equation for the lengths of sides a, b and hypotenuse c and is often called the Pythagorean equation.

This theorem is named after the Greek philosopher Pythagoras, who lived around 570 BC. he was born This theorem has been proven countless times in many different ways. The proofs vary and include both geometric and algebraic proofs, some thousands of years old.

If the Euclidean space is expressed in the Cartesian coordinate system of analytic geometry, the Euclidean distance satisfies the Pythagorean relation. That is, the square of the distance between two points is equal to the sum of the squares of the differences in each coordinate between the points.

Therefore, The entire trip is of 480 miles.

To know more about Pythagoras theorem, check out:

https://brainly.in/question/185373

#SPJ4

The tension in the string when a 40 kg stone tied to a string is whirled horizontally at a speed of 2.2 m/s will be 488 N/m.

When two solid things come into touch with one another, tension is the force that is generated. A force of tension is the force generated by a rope, string, or chain.

When one mass is drawn vertically and another is being pulled horizontally, there is tension force acting on the string. In the absence of gravity, this gives the tension force pulling on a string.

We are aware that T = mg + ma is the formula used to compute the force of tension.

T = 40(10) + 40(2.2)

T = 488 N/m.

Given that tension is a form of force, it shares the same measurement and unit as force. The CGS unit for tension is dyne whereas the SI unit is newton (N).

To know more about tension, visit:

https://brainly.com/question/11348644

#SPJ1

The centripetal acceleration of the stone is:

ac = v2 / r

Let us assume the radius of the string is 1m.

ac = (2.2 m/s)2 / 1

The tension in the string is:

T = m a = (40)*(2.2*2.2)

T = 40 * 2.2 * 2.2

T = 193.6 N

To know more about Centripetal acceleration,

https://brainly.com/question/29697949

#SPJ1

The distance travelled by the bowling ball is 18.6566 ft

Circumference = 2πr = 27

Weight of the ball = 14 lb

Radius of gyration = 3.28

Velocity = rω = 20 ft/s

Coefficient of friction = 0.20

Total force on y axis= 0, therefore N = W

= F = μN = μW

and, ∑M = Iα

Hence,

= Fr = Iα

Total force on x axis = 0,

= F = ma = μW

= a = μg

Combining all the equations,

= Fr = Iα

= μWr = mk²α

= α = (μgr) / k²

If initial velocity = 0 then, ω = αt

=  ω = αt = [ (μgr) / k² ] t

= t = (vk²) / (μgr²)

Now, v = u + αt

= v - u = (μg) + (vk²) / (μgr²)

= u = v [ 1 +(k²/r²) ]

Distance travelled by the ball = s =

= v² = u² - 2αs

= ( u² ) / [ 1 +(k²/r²) ] ² = u² - 2μgs

= s = (u²/2μg) [1 - (1/(1 + (k²/r²))²)]

= s = 18.6566 ft

To know more about Friction:

https://brainly.com/question/14259276

#SPJ4

The gravitational force between two very large metal spheres in outer space if the mass of each sphere were halved is 14 N

F = G m1 m2 / r²

F = Gravitational force of attraction

G = Gravitational constant

m1, m2 = Masses of both spheres

r = Distance between the spheres

m1' = m1 / 2

m2' = m2 / 2

F' = G m1' m2' / r²

F' = G ( m1 / 2 ) ( m2 / 2 ) / r²

F' = G m1 m2 / 4 r²

F' = F / 4

F' = 56 / 4

F' = 14 N

Therefore, the force is 14 N

To know more about Gravitational force of attraction

https://brainly.com/question/9373839

#SPJ4

The mass of the star of the distant solar system is 82 * 10²² kg and the mass of the planet of the distant solar system is 8.58 * 10²⁵ kg

g = G M / r

g = Acceleration due to gravity

G = Gravitational constant

M = Mass of star

r = Distance between both bodies

g = 63.6 m / s²

G = 6.67 * 10⁻¹¹ N m² / kg²

r = 8.6 * 10¹¹ m

Ms = 63.6 * 8.6 * 10¹¹ / ( 6.67 * 10⁻¹¹ )

Ms = 82 * 10²² kg

F = G M m / r²

F = m g

Equating,

m g = G M m / r²

With the above equation, we can find the mass as:

Mp = g r² / G

Mp = 63.6 * ( 1.8 * 10⁷ / 2 )² / 6.67 * 10⁻¹¹

Mass of particle = 8.58 * 10²⁵ kg

Therefore the mass will be equal to 8.58 * 10²⁵ kg

To know more about mass: brainly.com/question/15886625

#SPJ4

assuming they were moving at the same speed and started riding at the same position and time, then no, her brother was not moving relative to ashley.

Cataract is a condition in which there is a progressive thickening of the lens causing vision to become cloudy, opaque, and distorted.

The majority of cataracts occur when the tissue that makes up the eye's lens changes due to age or trauma.

The risk of cataracts may be increased by some hereditary genetic abnormalities that can result in other health issues. Other eye diseases, previous eye surgery, or other disorders like diabetes might also lead to cataracts. Cataracts can also form as a result of prolonged steroid drug usage.

To know more about cataract refer to:

https://brainly.com/question/26139170

#SPJ1

Linda, a biker, is moving along a circular path at a constant speed of 10 km/h. In a neighboring arena kelvin, another biker, is moving along a circular path at a constant speed of 12 km/h. If the acceleration of the two bikers is the same, then Kevin’s circular path has a bigger radius than Linda’s path.

Speed is the pace at which an item moves along a route in time, whereas velocity is the rate and direction of movement. In other words, velocity is a vector, whereas speed is a scalar number.

Given that,

Linda, a biker, is moving along a circular path at a constant speed of 10 km/h.

kelvin, another biker, is moving along a circular path at a constant speed of 12 km/h.

As we know,

acceleration (a) = V²/r

For Linda, a₁ = (10)²/r₁

For Kelvin, a₂ = (12)² /r₂

So, a₁/a₂ = [(10)²/r₁] × [r₂/(12)²]

or, a₁/a₂ = 0.694 r₂/r₁

or, r₁ = 0.694 r₂      [ As, acceleration is same]

Kevin’s speed is higher, the radius of his path must also be higher to maintain the same ratio. Therefore, Kevin’s circular path has a bigger radius than Linda’s path.

To know more about speed refer to:

https://brainly.com/question/13943409

#SPJ1

The complete question is as follows:

Linda, a biker, is moving along a circular path at a constant speed of 10 km/h. In a neighboring arena Kevin, another biker, is moving along a circular path at a constant speed of 12 km/h. If the acceleration of the two bikers is the same, what can you infer?

A) The centripetal force on Kevin is higher than that on Linda.

B) The centripetal force on Linda is higher than that on Kevin.

C) Kevin’s circular path has a bigger radius than Linda’s path.

D) Linda’s circular path has a bigger radius than Kevin’s path

The distance in mm between these minima is 0.29 ×[tex]10^{-3}[/tex] m

For first minima, m=1, Then,

[tex]a\sin \theta_1 = \lambda_1 \Rightarrow \sin\theta_1 = \frac{\lambda_1}{a} \Rightarrow \theta_1 = \sin^{-1}\left(\frac{589.1\times10^{-9}}{2.4\times 10^{-6}}\right) = 14.2^{\circ}[/tex]

[tex]a\sin \theta_2 = \lambda_2 \Rightarrow \sin\theta_2 = \frac{\lambda_2}{a} \Rightarrow \theta_2 = \sin^{-1}\left(\frac{589.6\times10^{-9}}{2.4\times 10^{-6}}\right) = 14.22^{\circ}[/tex]

Hence the required angle is , (14.22 - 14.2) = 0.02o

The distance between these two minima,

[tex]\Delta y = y_2 -y_1 = \frac{D}{a}\left( \lambda_2-\lambda_1\right) = \frac{1.4}{2.4\times 10^{-6}}\left(0.5\times 10^{-9} \right ) = 0.29\times 10^{-3} \hspace{2mm} m[/tex]

This distance is best measured using a microscope.

The length of a particular path taken by an object between two points is its distance, such as the distance traveled through a maze. In some cases, such as when a ball is thrown straight up or the Earth completes an orbit, this can even be a closed distance along a closed curve that begins and ends at the same location. The mathematical term for this is the curve's arc length. It is also possible to signify the distance traveled: a "ahead" distance is positive and a "backward" distance is negative.

When building vehicles or mechanical gears, it can be helpful to take circular distance—the distance covered by a

Learn more about distance here:

https://brainly.com/question/13034462

#SPJ4

No, as she kept the box a safe distance from her body. As closely as you can, hug the load to your body.

Lift gradually by extending your hips and knees (not your back). As you raise, keep your back straight and avoid twisting. Hold the load at the level of your belly button, as near to your body as you can.

Keep the burden as near to your body as you can, if at all possible. Perhaps this is preferable to fiercely clutching it in your hands. As opposed to either entirely flexing your back (stooping) or fully flexing your hips and knees (full/deep squatting), it is ideal to slightly bend your back, hips, and knees at the beginning of the lift.

To know more about lifting methods visit:-

https://brainly.com/question/14862609

#SPJ4

The speed of the projectile F= μο[tex]i^{2}[/tex]/2π  ㏑(1+ W/r)i^.

The projectile's path between y+dy should be considered. Equation is used to determine the magnetic force acting on the segment as well as the magnetic field of each semi-infinite wire (the top rail is known as wire 1 and the bottom rail as wire).

The field (in the region between the wires) set up by wire 1 is into the paper (the "k" direction), and that set up by wire 2 is also into the paper. The current. in rail. 1. is in the "+ i." direction, and. the current. in rail 2 is in the. " i" direction. The force element (a function of y) acting on the segment of the projectile (in which the current runs in the − j^ direction) is provided below. The coordinate. origin is  at the. bottom of the. projectile.

d F = d F1 +dF2 = idy(− j^)× B1 +dy(− j^ )× B2 =i[B 1 +B 2 ] i dy

F= μο[tex]i^{2}[/tex]/2π  ㏑(1+ W/r)i^.

Learn more about projectile here:

https://brainly.com/question/11422992

#SPJ4

Consequently, the acceleration due to gravity of the pole voulter is 2000J.  any object at ground surface has a potential energy = zero newtons.

Gravitational potential energy is the energy that an object has due to its location within a gravitational field. The most usual use of gravitational potential energy is for a body at the surface of the Earth, where it is reasonable to assume that the gravitational pull is constant at about 9.8 m/s. 2.Any object at ground level has a potential energy of zero newtons becuase anything multiplied by zero is zero. An object with mass of 54 kg, 4 meters above the ground has a gravitatinal potential energy of 2116.8 Joules.

If an object is located at a height that is higher (or lower) than the zero height, it has gravitational potential energy. If an object is situated on an elastic media in a position besides the equilibrium position, it has elastic potential energy.

To know more about  gravitational potential energy visit:

https://brainly.com/question/3884855

#SPJ4

When light travels from air into water, it slows down, causing it to change direction slightly.

What is  light travels?

Light moves in waves. It does not, however, require any substance or material to transport its energy forward, unlike sound waves or water waves. This implies that light may pass through a vacuum, or an area that is entirely devoid of air. (In contrast, sound must pass through a solid, liquid, or gas.)

Light slows down and somewhat changes direction as it passes through water from air. Refraction is the name for this shift in direction. Light "bends" more in the direction of the normal line when it enters a denser material (one with a higher refractive index).

Light bends in the direction of the normal as it passes through an interface into a material having a greater index of refraction. On the other hand, light bending over a higher n to lower n contact will deviate from the usual.

To learn more about light travels visit:https://brainly.com/question/1831789

#SPJ4

Answer:

C) The right not to be put in double jeopardy.

Explanation:

There was other sources that stated that too, I just chose the image below to make you more confident with ""C" being the right answer.

The elastic potential energy of the same spring when it is stretched by 12 cm is 180 J.

What is elastic?
Elasticity in physics and material science refers to a body's capacity to withstand a force that causes distortion and to recover its original dimensions after the force has been removed. When sufficient loads are applied, solid objects will deform; if the substance is elastic, this same object will revert to its original size and shape after the loads have been removed. Unlike plasticity, which prevents this from happening and causes the object to stay deformed, For various materials, the physical causes of elastic behaviour can vary greatly. When forces are applied, the atomic lattice in metals changes in size and shape. The lattice returns to its initial lower energy state when forces are removed.

The elastic potential energy of a spring is given by the equation:
PE = 1/2 kx^2

Where k is the spring constant and x is the amount of stretching. In this case, k is a constant since it is the same spring and x is the amount of stretching, which is 12cm. Substituting these values into the equation gives:

PE = 1/2 (20 J/8cm^2)(12cm)^2
= 180 J
Therefore, the elastic potential energy of the same spring when it is stretched by 12 cm is 180 J.

To learn more about elastic
https://brainly.com/question/12497950
#SPJ4

The magnitude of velocity  will be  Δ=5.2 m/s.

What are vector quantities?

Any quantity which is defined by its magnitude and direction both are called as the vector quantities.

Now the data given in the question will be given as:

V(a) = 3 m/s

θ =  north of east

V(b) = 6 m/s

θ =  south of east =  360-40=320 north of east

Now we will find the x and y component of V(a)

V(ax) = V(a) cosθ

V(ax) = 2.82m/s

V(ay) = V(a)Sinθ

V(ay) = 1.03 m/s

Now we will find the x and y component of V(b)

V(bx) = V(b) cosθ

V(bx) = 4.6 m/s

V(by) = V(b) sinθ

V(by) = -3.86 m/s

Now change in velocity will be

ΔV = V(b) - V(a)

ΔV = 1.78 i - 4.89 j

The magnitude of these vectors:

ΔV = 5.2 m/s.

Therefore the magnitude of the V will be 5.2 m/s.

To know more about magnitude, refer: https://brainly.com/question/14452091

#SPJ4

Electromagnetic Force causes electric and magnetic effects such as the repulsion between like electrical charges or the interaction of bar magnets in a similar fashion of attraction & repulsion. It is long-ranged, but much weaker than the strong force. It can be attractive or repulsive and acts only between pieces of matter carrying electrical charge. Electricity, magnetism, and light are all produced by this force.

If the charge on q1 is doubled the force becomes 4 times its initial value.

Since, we know

F = (k×q1×q2)/r²

When the charges are doubled, we have :

F' = (k × 2q1 × 2q2)/r²

F' = 4 (k×q1×q2)/r²

Thus,

F' = 4F

Therefore, the force becomes 4 times its initial value.

To know more about force here: brainly.com/question/13191643

#SPJ4

If two people start at the same place and walk around a circular lake in opposite directions with angular speed of 1.7 × 10−3 rad/s and 3.4 × 10−3 rad/s, they will meet after 20.5 minutes.

ω = θ / T

ω = Angular velocity

θ = Angular distance

T = Time period

ω1 = 1.7 * 10⁻³ rad / s

ω2 = 3.4 * 10⁻³ rad / s

θ = ω T

Let the angular distance covered by both person be θ1 and θ2. Since they start at same point, when they meet the sum of their total angular distances will be 360° which is 2π in radians.

θ1 + θ2 = 2 π

ω1 T + ω2 T = 2 π

T = 2 π / ( ω1 + ω2 )

T = ( 2 * 3.14 ) / ( ( 1.7 * 10⁻³ ) + ( 3.4 * 10⁻³ ) )

T = 1.2314 * 10³ s

T = 1231.4 s

T = 20.5 min

Therefore, they will meet after 20.5 minutes.

To know more about angular speed

https://brainly.com/question/21482828

#SPJ4

A reflection nebula is described by the explosion of hot large stars. Option B.

Reflection nebulae differ from emission nebulae in that they themselves do not emit radiation. This is a cloud of dust and gas that reflects light energy from a nearby star or group of stars. They usually tend to be blue due to the way light scatters.

This nebula is a reflection nebula that glows by reflecting the light of nearby stars. In contrast to emission nebulae, which emit a reddish glow from excited gas atoms, reflection nebulae are bluish because interstellar dust particles prefer to reflect blue starlight. A cloud of gas and dust that emits no light of its own and glows by reflecting light from nearby stars.

Learn more about Reflection nebulae here:- https://brainly.com/question/28620777

#SPJ4

According to general principles, the object distance shows that the light rays coming from the object are parallel to one another, giving rise to f=-4.221.

A small, often straight-moving light beam is called a ray. A ray is represented by the light beam of a laser or laser pointer. A ray of light travels in a straight line until it hits an object, like a mirror or perhaps the boundary between two materials, per the ray model of light.

Small light beams called rays travel in a straight line as electromagnetic waves. Light always moves in a straight line, despite the fact that reflection and refraction can alter the direction of its speed.

To know more about light ray visit:

https://brainly.com/question/3703500

#SPJ4

According to the given statement the percent yield is closest to 17%

Additionally, the primary distinction between the two would be that molar mass provides the mass of the a mole of a certain material. In contrast, molecular weight refers to a substance's molecule's mass. While molar mass as well as molecular weight have distinct definitions and measurement systems, their values are equivalent.

Briefing:

How to calculate the percentage yield

The reaction between  Li3N(s) and LiH(s) is given as:

Calculate the moles of Li3N

Moles = Mass/Molar mass

Moles = 70/35

Moles = 2 moles

You can see from the reaction the 1 mole of Li3N produces 3 moles of LiH, making the total amount of LiH 6 moles.

Determine the mass of LiH (theoretical yield)

Mass of LiH = 6 * 7.95

Mass of LiH = 47.7g

%yield = actual/theoretical * 100

%yield = 8/47.7 * 100

%yields = 16.77%

Hence the percent yield is closest to 17%

To know more about molar mass visit:

https://brainly.com/question/23576507

#SPJ4

A transparent oil with refraction index 1.24 spills on the surface of water  Assuming the maximum occurs in the first order, Then the thickness of the oil slick 271 nm

Given refraction index is 1.24

The formula to apply for find the maximum for this thin film is

2nt = mλ

(2)(1.29)t = (1)(700 X 10-9)

t = 2.71 X 10-7 m   which is 271 nm.

Light travels more slowly at higher refractive indices, changing direction within a material with a correspondingly greater degree. This means that lenses made of materials with higher refractive indices can bend light more strongly and have lower profiles. A refractive index of 1.5 applies to glass. In other words, the speed of light in glass is not independent of the color of the light and is 1.5 times slower than in a vacuum.

Learn more about refraction index here:

https://brainly.com/question/23750645

#SPJ4

The overall magnification of the microscope is  - 588.23 .

Magnification is the process of increasing apparent size.

M = magnification

l = distance between the eyepiece and the objective lens

f₀ = focal length of the objective

f₁ = focal length of the eyepiece

l = 20 cm

f₀ = 0.500 cm

f₁ = 1.70 cm

M = - (l/f₀)(25/f₁)

M =  - (20/0.500)(25/1.70)

M = - (40)(14.70)

M = - 588.23

The overall magnification for the microscope is - 588.23.

To know more about magnification,

https://brainly.com/question/13111842

#SPJ4

Yes, the outcomes are in perfect accordance with the basic lens equation.

1/f = 1/s1 + 1/s2. This is the equation for the Gaussian lens. The basic relationship between the size of both the optical system and the diffraction limit of the lens is given by this equation.

For a spherical mirror, the focal length, scale factor, and object distance are all related by the lens equation, often known as the lens formula. The formula is presented as follows: Lens Equation - 1/u + 1/v = 1/f, where v is the image's distance from the lens.

To know more about lens equation visit :

https://brainly.com/question/11971432

#SPJ4

The recoil (springing or flying back of the gun when shots are fired) momentum of a gun is the same as the momentum of the bullet it fires.

option C is the correct answer.

The principle of conservation of linear momentum states that in an isolated system, the sum of the initial momentum of the system is equal to the sum of the final momentum of the system.

Mathematically, the principle of conservation of linear momentum is written as;

Pi = Pf

where;

m₁u₁ = m₂u₂

where;

Thus, based on the principle of conservation of linear momentum the final momentum of the gun will always be equal to the final momentum of the bullet.

Learn more about linear momentum here: https://brainly.com/question/7538238

#SPJ1