Answer:
The ball being thrown straight down.
Explanation:
The downforce and gravitational pull of the ball going down will give it
a higher velocity compared to the one trown horizontially it will take some time for it to catch downforce speed and reach the same velocity.
how many cubic objects of volume 2cm cube can be started in a room of dimension 2m by 3m by 4m
Answer:
12,000,000 boxes
Explanation:
the volume of the room can be found by using the equation for volume of a rectangular box:V=LxWxH
where:
L=2m
W=3m
H=4m
(it doesn't really matter which is which since it is multiplication)
when we multiply our values (2m*3m*4m) we get 24cubic meters
now we need to convert cubic meters to cubic centimeters
each cubic meter is 1,000,000 cubic centimeter we multiply 24 by 1,000,000 and we get: 24,000,000 cubic centimeters (cc)
dividing 24,000,000 by 2 (since each box is 2cc) we get 12,000,000
so, we know we can fit 12,000,000, 2 cubic centimeter boxes in this room
A student pushes on an object with a force of 6 newtons and the object does not move. what force does the object exert on the student’s hands?
Answer:
6 newtons
Explanation:
If it's an equal force exerted on the student's hands, the object will not move.
If a student pushes on an object with a force of 6 newtons and the object does not move then the force exerted by the object on the student’s hands would be 6 Newtons because the applied force is equal to the static frictional force until the object does not move.
What is friction?Friction is a type of force that resists or prevents the relative motion of two physical objects when their surfaces come in contact
As given in the problem If a student pushes on an object with a force of 6 newtons and the object does not move then we have to find out the force exerted by the object on the student’s hands,
Force applied by the student of the object = 6 Newtons
The force exerted by the object on the student's hand = 6 Newtons
Thus, the force exerted by the object on the student’s hands would be 6 Newtons
Learn more about friction from here link given below;
brainly.com/question/24186853
#SPJ6
13. A ball is dropped. According to Newton's Third Law, the action force is the
earth pulling the ball, and the reaction is:
Answer:
the ground when the ball hits it
Explanation:
A ball falls freely towards the Earth. If the action force is the Earth pulling down on the ball, then identify which of the following best describe the reaction force:
2. Un niño hace girar con la mano una pelota de hule que se encuentra sujeta mediante un cordón de
0.75 m de longitud. Si la pelota da 0.7 vueltas a cada segundo, entonces,
a) ¿Cuál es el periodo de la pelota?
b) ¿Cuál es la velocidad lineal de la pelota?
Cuando el niño hace girar 0.7 vueltas por segundo una pelota de hule que se encuentra sujeta mediante un cordón de 0.75 m de longitud, tenemos que:
a) El periodo de la pelota es 1.43 segundos.
b) La velocidad lineal de la pelota es 3.3 m/s.
a) El periodo de la pelota está dado por:
[tex] T = \frac{2\pi}{\omega} [/tex]
En donde:
ω: es la velocidad angular
Dado que la pelota da 0.7 vueltas (revoluciones) cada segundo, la velocidad angular es:
[tex] \omega = \frac{0.7 \:rev}{s}*\frac{2\pi rad}{1 \:rev} = 4.40 rad/s [/tex]
Entonces, el periodo es:
[tex]T = \frac{2\pi}{\omega} = \frac{2\pi}{4.40 rad/s} = 1.43 s[/tex]
b) La velocidad lineal de la pelota se puede calcular usando la siguiente ecuación:
[tex] v = \omega r [/tex]
En donde:
r: es el radio de la circunferencia = longitud del cordón = 0.75 m
[tex]v = \omega r =4.40 rad/s*0.75 m = 3.3 m/s[/tex]
Por lo tanto, la velocidad lineal de la pelota es 3.3 m/s.
Puedes encontar mas aquí:
https://brainly.com/question/19380743?referrer=searchResultshttps://brainly.com/question/17689540?referrer=searchResultsEspero que te sea de utilidad!
How much work must be done to stop a 925-kg car traveling at 95 km/h?
The amount of work done to stop the car is equal to 322,099.85 Joules.
Given the following data:
Mass = 925 kilogramsVelocity = 95 km/hConversion:
Velocity = 95 km/h = [tex]\frac{95 \times 1000}{60 \times 60} = 26.39 \;m/s^2[/tex]
To determine the amount of work done to stop the car, we would apply the work-energy theorem:
Note: The amount of work done must balance the kinetic energy possessed by the car due to its motion.
From the work-energy theorem, we have:
[tex]Work\done = \Delta K.E\\\\Work\done = \frac{1}{2} MV^2[/tex]
Substituting the given parameters into the formula, we have;
[tex]Work\;done = \frac{1}{2} \times 925 \times (26.39)^2\\\\Work\;done =462.5 \times 696.4321[/tex]
Work done = 322,099.85 Joules
Read more: https://brainly.com/question/22599382
What is the best reason astronomers have come up with to explain why sunspots are cooler and look darker
Answer:
Sunspots are places where the strong magnetic fields in the Sun resist the upward motion of bubbling hot gases from underneath
Explanation:
Lab report: Newton's Second Law
Answer:
Newton found the acceleration of a body to increase with force and decreases with mass
fore example : a equal force applied on two different things that one of thing is have 100kg and another have70kg but the acceleration is different because the bigger one accelerate slower than the smaller because
[tex]f = ma[/tex]
A car accelerates from 20m/s to 25m/s in 4s as it passes a truck. What is the distance travelled?
Answer:
afcorse 1 miles
Explanation:
yep plz make me the brainliest
The distance travelled by car is displacement which is
What is displacement?Displacement is defined to be the change in position of an object.
[tex]s=\frac{1}{2} (v+u)t[/tex]
[tex]s=\frac{1}{2} (25+20)4\\s= 90 m[/tex]
To learn more about Displacement here
https://brainly.com/question/11934397
#SPJ2
What do you mean by 100w power?
A swimming pool has dimension of 30m×10m×3m. When it is filled with water , what is the thrust on the bottom and sides
Answer:
3,900m³
Explanation:
a device that converts mechanical energy into electricity is a
Answer:
An electric generator is a device that converts a form of energy into electricity.
Explanation:
PLEASE ANSWER ASAP!!
Which part of the graph represents how much energy the reactants need to gain to become products? F Potential energy HA Н G Reaction progress
A. H minus F
B. H
C. G
D. F
(NO LINKS)
Terri is excited about the baby she is carrying in her womb. One day, she tells her
cousin that the child is now the size of a grape. Weeks later, she describes the child as
the size of an apple. A few weeks after that, she describes the child as the size of a
banana. "Seriously, Terri, are you having a baby or shopping for groceries?" asks her
cousin. Terri explains that this is just the easiest way to describe the size of the baby
now that it is a(n)
Zygote
O Fetus
O Embryo
Infant
Answer:
Fetus
Explanation:
the outsiders I got nuggets out of the elder and I get to make it in and I got I got
For a boiling kettle draw a sankey diagram to show where The energy goes
Answer:
draw the picture / (.) (.) \ Patrick star
explique ¿por que un objeto que tiene energía es capaz de realizar un trabajo?
The maximum allowable potential difference across a 250 mH inductor is 360 V . You need to raise the current through the inductor from 1.5 A to 2.5 A . What is the minimum time you should allow for changing the current?
This question involves the concepts of potential difference, inductance, and current.
The minimum time that should be allowed for the current to change is "0.694 ms".
The inductance of an inductor is given by the following formula:
[tex]E=L\frac{\Delta I}{\Delta t}\\[/tex]
where,
E = potential difference across the inductor = 360 volts
L = inductance of the inductor = 250 mH = 0.25 H
ΔI = change in current = 2.5 A - 1.5 A = 1 A
Δt = time required = ?
Therefore,
[tex]\Delta t = \frac{(0.25\ H)(1\ A)}{360\ volts}[/tex]
Δt = 6.94 x 10⁻⁴ s = 0.694 ms
Learn more about inductance here:
https://brainly.com/question/17431388?referrer=searchResults
Which state of matter has molecules that barely move at all?
liquid
gas
solid
They are all the same.
Answer:
the answer is solid.
Explanation:
solid particles have a definite volume and shape therefore they cannot move are they are whole. the particles of solid are closely packed together, barely move, and barely vibrate.
what will be the effect on gravitational pull between two objects of medium between them is changed
Answer:
force of gravitational attraction between them also decreases.
Explanation:
force of gravitational attraction between them also decreases.
it is not 132m and plzz explain how the answer is 66m
Distance = 1/2 x velocity x time
Distance = 1/2 x 0.40 x 330
Distance = 66 meters
If Earth's mass doubled, your weight would..
a. increase
b. decrease
c. stay the same
Answer:
a. increase
Explanation:
Doubling the mass of the Earth would double your weight, since gravitational force is directly proportional to mass, but doubling the radius (which doubles if the diameter doubles) would decrease your weight by a factor of 1/4, since gravitational force is inversely proportional to the square of the radius.
anybody know the answer??
Answer:
Centimeter
Explanation:
We know the measurement is defined as:
1 meter= 100cm
1 cm= 1/100 meter
1 centimeter= 0.01 meter
Therefore, 0.01 meter is equal to 1 cm or 1 centimeter.
A measuring cylinder contains 80 cm3 of a certain liquid. The liquid is poured
into an empty beaker of mass 48 g. The total mass of the beaker and the liquid
was found to be 136 g.
(a) Calculate the mass of the liquid in grams.
(b)Calculate the density of the liquid in gcm-3
Answer:
1.5 g/cm
3
Let d be the density of fluid.
So , Initial reading of balance, F
1
=30dg N
After the level reaches 50cm
3
Final reading of balance , F
2
=50dg N
Given that difference between final and initial reading is 30g
i.e, F
2
−F
1
=30 g
⟹50dg−30dg=30g
⟹20dg=30g
⟹d=
20g
30g
⟹d=1.5g/cm
3
So, density of fluid is 1.5g/cm
3
An object's inertia causes it to come to a rest position.
Answer:
no
Explanation:
the inertia of an object does not make it to come to rest, this is normally caused by friction
Can you please draw circuit diagram with 5 Ω resistor in series with bulb, switch and 12 V battery?
Answer:
Sorry for the bad drawing, as you have not specified whether is should be open switch or close I have drawn both
I hope it helps.
A source produces 25 waves every second. The wavelength of the waves is
50 cm. How fast will the waves be travelling?
Answer:
1 s
Explanation:
The speed of the sound, distance travelled and the time taken relationship is given as follows.
Speedofsound,v=Distancetravelled×Timetaken ----eqn 1
With the given values of wavelength = 50 cm = 0.5 m and frequency =1000 Hz, the speed of the wave is calculated as follows.
Speedofsound,v=Frequency(ν)×Wavelength(λ) -- eqn 2
That is, v=ν×λ=1000Hz×0.5m=500m/s
Substituting the value of the speed of sound in eqn 1 gives the time taken for the sound wave to travel a distance of 500 m.
That is, Timetaken=
Distancetravelled
Speedofsound
=
500m
500m/s
=1second.
Hence, the time taken for the sound wave to travel is 1 second.
The speed with which the waves will be travelling is 12.5m/s.
Given the data in the question;
Frequency; [tex]f = 25\ waves\ per\ second = 25s^{-1}[/tex]Wavelength; [tex]\lambda = 50cm = 0.5m[/tex]Speed of the wave; [tex]v =\ ?[/tex]
To determine how fast the waves will be travelling, we use the expression for the relations between wavelength, frequency and speed of wave.
[tex]\lambda = \frac{v}{f}[/tex]
Where [tex]\lambda[/tex] is wavelength, f is frequency and v is speed of wave
We substitute our values into the equation
[tex]0.5m = \frac{v}{25s^{-1}} \\\\v = 0.5m * 25s^{-1}\\\\v = 12.5ms^{-1}[/tex]
Therefore, the speed with which the waves will be travelling is 12.5m/s.
Learn more: https://brainly.com/question/14667830
LED lightbulbs are the most energy efficient way to light your home, as they use _____ of the energy of a comparable compact fluorescent bulb.
Light - emitting diode lightbulbs known as LED lightbulbs are energy saving lightbulbs. They consume very small amount of energy compare to other lightbulbs. Therefore, LED lightbulbs are the most energy efficient way to light your home, as they use about ten percent (10%) of the energy of a comparable compact fluorescent bulb.
There are varieties of different light bulbs. some of them are incandescent, compact fluorescent (CFL), halogen, and light-emitting diode (LED) to mention a few.
Before the advent of light - emitting diode (LED) bulbs, some of the bulbs consume a lot of energy. For instance, we have incandescent bulbs of 20 watts, 50 watts, 100 watts and even 200 watts.
But with the advent of light - emitting diode (LED) bulbs, consumers can save energy because light - emitting diode (LED) bulbs save a lot of energy and they are very bright.
We can therefore conclude that light - emitting diode lightbulbs known as LED lightbulbs are the most energy efficient way to light your home, as they use about ten percent (10%) of the energy of a comparable compact fluorescent bulb.
Learn more here: https://brainly.com/question/13423221
Which of the followng is Newton's Second Law?
a. An object in motion will stay in motion unless acted upon by an unbalanced outside force
b .Force = mass times acceleration
c.When one object puts a force on the another object, the second object puts a force back on the first, equal in magnitude and opposite in direction
Answer:
A
Explanation:
answer with proper explanation
Answer:
B
Explanation:
Moment = force * perpendicular distance
Since the beam is balanced(equilibrium), the 2 moments will be equal.
30 * P = 70 * Q
The 2 combinations which achieve this equality is P = 21 and Q = 9
for what angle of projetion is the range is maximum
Answer:
46 degrees
Explanation:
When you mix pigments together, why does the resulting color always look darker?
Answer:
because you are not only mixing the colors u are also mix the colors in side the colors for example if u take pink red and white and mix it with green blue and yellow it will make it darling because if the inside colors