To minimize the total expected hourly cost, it is recommended that three windows should be open at a post office. The customers wait in a single line for the first open window.
Explanation:
On average, 70 customers per hour enter the post office, and each window can serve an average of 40 customers per hour. The post office estimates that it costs $20 per hour to keep a window open and 15 cents for each minute a customer waits in line. Interarrival times and service times are exponential.
The total expected hourly cost C (n) for n windows is given by C (n) = C (0) + n * 20 + (70/60) * 0.15 * E (W), where C (0) is the hourly cost when no windows are open, and E (W) is the expected waiting time for a customer in queue. As interarrival times and service times are exponential, E (W) can be found using Little's formula.
E (W) = E (N) / (70/60), where E (N) is the expected number of customers in the queue. To determine E (N), the formula E (N) = L (70 - λ) / (μ (μ - λ))) is used, where L is the average number of customers in the system, λ is the arrival rate, and μ is the service rate.
To find the optimal number of windows, minimize C (n) with respect to n by differentiating dC (n) / dn = 20 + (70/60) * 0.15 * (dE (N) / dn) = 0. Simplifying the equation gives dE (N) / dn = - (240/7) * n + (210/7). Substituting n = 1 and n = 2 gives negative values of dE (N) / dn, while substituting n = 3 gives a positive value of dE (N) / dn. Therefore, the optimal number of windows is three (3).
To know more about Little's formula here:
https://brainly.com/question/32187724
#SPJ11
The magnitudes of the latent heats depend on the temperature or
pressure at which the phase change occurs.
The latent heat is the amount of heat energy that needs to be added or removed from a substance in order for it to change phase without changing temperature.
The magnitudes of the latent heats depend on the temperature or pressure at which the phase change occurs. For instance, the latent heat of fusion of water is 334 J/g, which means that 334 joules of energy are required to melt one gram of ice at 0°C and atmospheric pressure.
The latent heat of vaporization of water, on the other hand, is 2,260 J/g, which means that 2,260 joules of energy are required to turn one gram of water into steam at 100°C and atmospheric pressure
Latent heat refers to the heat energy required to transform a substance from one phase to another at a constant temperature and pressure, without any change in temperature.
Latent heat has different magnitudes at different temperatures and pressures, depending on the phase change that occurs. In other words, the amount of energy required to change the phase of a substance from solid to liquid or from liquid to gas will differ based on the temperature and pressure at which it happens.
For example, the latent heat of fusion of water is 334 J/g, which means that 334 joules of energy are needed to melt one gram of ice at 0°C and atmospheric pressure. Similarly, the latent heat of vaporization of water is 2,260 J/g, which means that 2,260 joules of energy are required to turn one gram of water into steam at 100°C and atmospheric pressure.
In conclusion, the magnitude of latent heat depends on the temperature or pressure at which the phase change occurs. At different temperatures and pressures, different amounts of energy are required to change the phase of a substance without any change in temperature.
To know more about latent heat visit:
brainly.com/question/23976436
#SPJ11
Strength of materials was concern with relation between load and stress. The slope of stress-strain called the modulus of elasticity. The unit of deformation has the same unit as length L. true false
The statement "The unit of deformation has the same unit as length L" is true in Strength of Materials. Strength of Materials is concerned with the relationship between load and stress.
The slope of the stress-strain curve is called the modulus of elasticity, which measures a material's stiffness, or how much it resists deformation when subjected to a force.When a load is applied to a material, it causes a stress to develop, which is the force per unit area. If the load is increased, the stress also increases, and the material will eventually reach a point where it can no longer withstand the load and will deform or fail.
Deformation is the change in length, angle, or shape of a material due to an applied load. The unit of deformation is the same as the unit of length, which is typically meters or millimeters. This means that if a material is subjected to a load and experiences a deformation of 2 mm.
To know more about modulus visit:
https://brainly.com/question/30756002
#SPJ11
You want to design an arithmetic adder/subtractor logic circuit.
(a) List the steps that you will apply in the design approach. 8-bit BCD full adder Design the circuit. Explain each step. Realize with AND, OR, NOT gates. (b) In the circuit you designed, the numbers in the last digit of the Student numbers of those in the group Collect and discuss the result. student numbers 1.5 and 5.
(a) Steps in designing an 8-bit BCD full adder circuit using AND, OR, and NOT gates:
1. **Analyze the requirements**: Understand the specifications and determine the desired functionality of the adder/subtractor circuit.
2. **Design the truth table**: Create a truth table that shows all possible input combinations and the corresponding output values for the adder/subtractor.
3. **Determine the logic equations**: Based on the truth table, derive the logic equations for each output bit of the adder/subtractor. This involves expressing the outputs in terms of the input variables using AND, OR, and NOT gates.
4. **Simplify the equations**: Simplify the logic equations using Boolean algebra or Karnaugh maps to reduce the complexity of the circuit.
5. **Draw the circuit diagram**: Using the simplified logic equations, draw the circuit diagram for the 8-bit BCD full adder. Represent the logical operations using AND, OR, and NOT gates.
6. **Implement the circuit**: Realize the circuit design by connecting the appropriate gates as per the circuit diagram. Ensure proper interconnections and adherence to the logical operations.
7. **Test and verify**: Validate the functionality of the circuit by providing various input combinations and comparing the output with the expected results.
8. **Optimize and refine**: Fine-tune the circuit design if necessary, considering factors such as speed, area, and power consumption.
(b) Regarding the numbers in the last digit of the student numbers 1.5 and 5, further information or clarification is needed. It is unclear how these numbers relate to the designed circuit or the desired discussion. Please provide additional details or specify the context so that I can assist you more effectively.
Learn more about Boolean algebra here:
https://brainly.com/question/32616360
#SPJ11
An ash disposal system of a steam plant cost $30,000 when new. It is now 4 years old. The
annual maintenance costs for the four years have been $2000, $2250, $2675, $3000.
Interest rate = 6%. A new system is guaranteed to have an equated annual maintenance and
operation cost not exceeding $1500. Its cost is $47,000 installed. Life of each system, 7
years; salvage value, 5% of the first cost. Present sale value of old system is same as salvage
value. Would it be profitable to install the new system?
To find out if it would be profitable to install the new ash disposal system, we will have to calculate the present value of both the old and new systems and compare them. Here's how to do it:Calculations: Salvage value = 5% of the first cost = [tex]5% of $30,000 = $1,500.[/tex]
Life of each system = 7 years. Interest rate = 6%.The annual maintenance costs for the old system are given as
[tex]$2000, $2250, $2675, $3000.[/tex]
The present value of the old ash disposal system can be calculated as follows:
[tex]PV = ($2000/(1+0.06)^1) + ($2250/(1+0.06)^2) + ($2675/(1+0.06)^3) + ($3000/(1+0.06)^4) + ($1500/(1+0.06)^5)PV = $8,616.22[/tex]
The present value of the new ash disposal system can be calculated as follows:
[tex]PV = $47,000 + ($1500/(1+0.06)^1) + ($1500/(1+0.06)^2) + ($1500/(1+0.06)^3) + ($1500/(1+0.06)^4) + ($1500/(1+0.06)^5) + ($1500/(1+0.06)^6) + ($1500/(1+0.06)^7) - ($1,500/(1+0.06)^7)PV = $57,924.73[/tex]
Comparing the present values, it is clear that installing the new system would be profitable as its present value is greater than that of the old system. Therefore, the new ash disposal system should be installed.
To know more about profitable visit :
https://brainly.com/question/15293328
#SPJ11
Q. 1 Model and simulate a thermal heating house system using Simulink models controlled by ON/OFF control strategy to calculate the heating cost taking into account the outdoor environment, the thermal characteristics of the house, and the house heater system. Your answer should include Simulink models of the whole system showing the heat cost and a comparison between the in and out doors temperatures, the heater unit and the house. Also, write the mathematical equations of both heater and house.
The Simulink model of the thermal heating house system can be used to optimize energy efficiency and reduce heating costs.
The Simulink model of the thermal heating house system using ON/OFF control strategy is presented below:There are three main components of the thermal heating house system, which are the outdoor environment, the thermal characteristics of the house, and the house heater system. The outdoor environment affects the overall heat loss of the house.
The thermal characteristics of the house describe how well the house retains heat. The house heater system is responsible for generating heat and maintaining a comfortable temperature indoors.In the thermal heating house system, heat transfer occurs between the house and the outdoor environment.
Heat is generated by the heater unit inside the house and is transferred to the indoor air, which then warms up the house. The temperature difference between the in and out doors and the heater unit and the house were calculated. The mathematical equations of both heater and house are shown below.Heater Equationq(t) = m * c * (T(t) - T0)T(t) = q(t) / (m * c) + T0House Equationq(t) = k * A * (Ti - Ta) / dT / Rq(t) = m * c * (Ti - To)
The heat cost can be calculated based on the amount of energy consumed by the heater unit. A comparison between the heat cost and the outdoor temperature can help determine how much energy is required to maintain a comfortable indoor temperature.
To know more about heating visit :
https://brainly.com/question/14643550
#SPJ11
(i) determine the transfer function from u to y; (ii) if the system is stable or not; (iii) Compute the location of the zeros and poles. d²x = -x + 4u, dy dt =y+x+u dt²
The problem statement is given as follows:d²x = -x + 4u, dy dt = y + x + u dt²In this problem statement, we have been asked to determine the transfer function from u to y, the stability of the system, and the location of the zeros and poles.
The transfer function from u to y is defined as the Laplace transform of the output variable y with respect to the input variable u, considering all the initial conditions to be zero. Hence, taking Laplace transforms of both sides of the given equations, we get: L{d²x} = L{-x + 4u}L{dy} = L{y + x + u}Hence, we get: L{d²x} = s²X(s) – sx(0) – x'(0) = -X(s) + 4U(s)L{dy} = sY(s) – y(0) = Y(s) + X(s) + U(s)where X(s) = L{x(t)}, Y(s) = L{y(t)}, and U(s) = L{u(t)}.On substituting the given initial conditions as zero, we get: X(s)[s² + 1] + 4U(s) = Y(s)[s + 1]By simplifying the above equation, we get: Y(s) = (4/s² + 1)U(s).
Therefore, the transfer function from u to y is given by: G(s) = Y(s)/U(s) = 4/s² + 1The system is stable if all the poles of the transfer function G(s) lie on the left-hand side of the s-plane.
To know more about transfer function visit:
https://brainly.com/question/31326455
#SPJ11
Determine the inverse Z-Transform of the following signals. a. x(z) = 2 + 2z/(z - 5) - 3z (z - 0.2)
b. x(z) = 4z⁻¹/(6z⁻² -5⁻¹ + 1)
The inverse Z-Transform of the given signal is x(n) = δ(n) - (16/25)5ⁿu(n - 1) + (4/5)(0.2ⁿ)u(n).b. x(z) = 4z⁻¹/(6z⁻² -5⁻¹ + 1)
a. x(z) = 2 + 2z/(z - 5) - 3z (z - 0.2)
To determine the inverse Z-Transform of the given signal, we will use partial fraction expansion.
To get started, let's factorize the denominator as follows:
z(z - 5)(z - 0.2)
Hence, using partial fraction expansion, we have;
X(z) = (2z² - 9.2z + 10)/(z(z - 5)(z - 0.2))
Let us assume:
X(z) = A/z + B/(z - 5) + C/(z - 0.2)
Multiplying both sides by z(z - 5)(z - 0.2) to get rid of the denominators and then solve for A, B and C, we have:
2z² - 9.2z + 10 = A(z - 5)(z - 0.2) + Bz(z - 0.2) + Cz(z - 5)
Setting z = 0,
we have: 10 = 5A(0.2),
hence A = 1
Substituting A back into the equation above and letting z = 5, we get:
25B = -16,
hence
B = -16/25
Similarly, setting z = 0.2, we get:
C = 4/5
Thus,
X(z) = 1/z - (16/25)/(z - 5) + (4/5)/(z - 0.2)
Taking inverse Z-transform of the above equation yields;
x(n) = δ(n) - (16/25)5ⁿu(n - 1) + (4/5)(0.2ⁿ)u(n)
Therefore, the inverse Z-Transform of the given signal is x(n) = δ(n) - (16/25)5ⁿu(n - 1) + (4/5)(0.2ⁿ)u(n).b. x(z) = 4z⁻¹/(6z⁻² -5⁻¹ + 1)
To know more about inverse Z-Transform, visit:
https://brainly.com/question/32622869
#SPJ11
Two normal stresses of equal magnitude of 5, but of opposite signs, act at an stress element in perpendicular directions x and y. The shear stress acting in the xy-plane at the plane is zero. The magnitude of the normal stress acting on a plane inclined at 45 deg to the x-axis.
O None of these
O 5/2
O 25
O 5/4
O 0
Given data: Normal stresses of equal magnitude = 5Opposite signs, Act at an stress element in perpendicular directions x and y.The shear stress acting in the xy-plane at the plane is zero. The plane is inclined at 45° to the x-axis.
Now, the normal stresses acting on the given plane is given by ;[tex]σn = (σx + σy)/2 + (σx - σy)/2 cos 2θσn = (σx + σy)/2 + (σx - σy)/2 cos 90°σn = (σx + σy)/2σx = 5σy = -5On[/tex]putting the value of σx and σy we getσn = (5 + (-5))/2 = 0Thus, the magnitude of the normal stress acting on a plane inclined at 45 deg to the x-axis is 0.Answer: The correct option is O 0.
To know more about plane visit:
https://brainly.com/question/2400767
#SPJ11
Why are the velocity gradients inside the boundary layer so large? Tell the Difference between Laminar Boundary Layer and Turbulence Boundary Layer.
The velocity gradients inside the boundary layer are large because of the friction caused by the flow and the viscosity of the fluid.
This friction is the force that is resisting the motion of the fluid and causing the fluid to slow down near the surface. This slowing down creates a velocity gradient within the boundary layer.
Difference between Laminar Boundary Layer and Turbulence Boundary Layer: The laminar boundary layer has smooth and predictable fluid motion, while the turbulent boundary layer has a random and chaotic fluid motion. In the laminar boundary layer, the velocity of the fluid increases steadily as one moves away from the surface.
In contrast, in the turbulent boundary layer, the velocity fluctuates widely and randomly, and the velocity profile is much flatter than in the laminar boundary layer. The thickness of the laminar boundary layer increases more gradually than the thickness of the turbulent boundary layer. The thickness of the turbulent boundary layer can be three to four times that of the laminar boundary layer.
To know more about layer visit:
https://brainly.com/question/30319346
#SPJ11
Consider a substance that boils at -34°C (negative thirty four degrees Celsius) at 98 kPa. At that temperature and pressure, one kg of liquid occupies 0.0015 m³ and one kg of vapor occupies 1.16 m². At 80 kPa, this stuff boils at -38°C (negative thirty eight degrees Celsius). Using just this information: a. Estimate the enthalpy of vaporization of this substance at 98 kPa. (Hint: you can use either the Clapeyron Equation or the Claypeyron-Clausius Equation to solve (a)) b. Estimate the molar mass of the substance.
a. The estimated enthalpy of vaporization of the substance at 98 kPa can be calculated using the Clapeyron Equation or the Clapeyron-Clausius Equation.
b. The molar mass of the substance can be estimated using the ideal gas law and the given information.
a. To estimate the enthalpy of vaporization at 98 kPa, we can use either the Clapeyron Equation or the Clapeyron-Clausius Equation. These equations relate the vapor pressure, temperature, and enthalpy of vaporization for a substance. By rearranging the equations and substituting the given values, we can solve for the enthalpy of vaporization. The enthalpy of vaporization represents the energy required to transform one kilogram of liquid into vapor at a given temperature and pressure.
b. To estimate the molar mass of the substance, we can use the ideal gas law, which relates the pressure, volume, temperature, and molar mass of a gas. Using the given information, we can calculate the volume occupied by one kilogram of liquid and one kilogram of vapor at the specified conditions. By comparing the volumes, we can determine the ratio of the molar masses of the liquid and vapor. Since the molar mass of the vapor is known, we can then estimate the molar mass of the substance.
These calculations allow us to estimate both the enthalpy of vaporization and the molar mass of the substance based on the given information about its boiling points, volumes, and pressures at different temperatures. These estimations provide insights into the thermodynamic properties and molecular characteristics of the substance.
Learn more about Clapeyron Equation here:
https://brainly.com/question/33369944
#SPJ11
From the technical literature and/or open sources, present the RCS of the triangular trihedral reflector as a function of the incidence angle (for both azimuth and elevation).
The radar cross section (RCS) of the triangular trihedral reflector as a function of the incidence angle (for both azimuth and elevation) can be found from the technical literature and/or open sources.
A trihedral reflector is a corner reflector that consists of three mutually perpendicular planes.
Reflectivity is the measure of a surface's capability to reflect electromagnetic waves.
The RCS is a scalar quantity that relates to the ratio of the power per unit area scattered in a specific direction to the strength of an incident electromagnetic wave’s electric field.
The RCS formula is given by:
[tex]$$ RCS = {{4πA}\over{\lambda^2}}$$[/tex]
Where A is the projected surface area of the target,
λ is the wavelength of the incident wave,
RCS is measured in square meters.
In the case of a trihedral reflector, the reflectivity is the same for both azimuth and elevation angles and is given by the following equation:
[tex]$$ RCS = {{16A^2}\over{\lambda^2}}$$[/tex]
Where A is the surface area of the trihedral reflector.
RCS varies with the incident angle, and the equation above is used to compute the reflectivity for all incident angles.
Therefore, it can be concluded that the RCS of the triangular trihedral reflector as a function of the incidence angle (for both azimuth and elevation) can be determined using the RCS formula and is given by the equation :
[tex]$$ RCS = {{16A^2}\over{\lambda^2}}$$.[/tex]
To know more about Magnetic field, visit:
https://brainly.com/question/19542022
#SPJ11
Consider Stokes' first problem, but allow the plate velocity to be an arbitrary function of time, U(t). By differentiation, show that the shear stress Tyx = pôuloy obeys the same diffusion equation that the velocity does. Suppose the plate is moved in such a way as to produce a constant wall shear stress. Determine the plate velocity for this motion. Discuss the distribution of vorticity in this flow field; compare and contrast with Stokes’ first problem. Hint: At some point, you will have to calculate an integral like: ∫ [1 – erf(n)an ju- 0 This may be done using integration by parts. It may be helpful to note that eftc(n) – n*-1exp(-n2) for large n.
Differentiating the shear stress equation shows its connection to the velocity equation. Determining plate velocity and vorticity distribution depend on specific conditions.
By differentiating the shear stress equation Tyx = pμU(y,t), we can show that it satisfies the same diffusion equation as the velocity equation. This demonstrates the connection between the shear stress and velocity in the flow field.
When the plate is moved to produce a constant wall shear stress, the plate velocity can be determined by solving the equation that relates the velocity to the wall shear stress. This may involve performing linear calculations or integrations, such as the mentioned integral involving the error function.
The distribution of vorticity in this flow field, which represents the local rotation of fluid particles, will depend on the specific plate motion and boundary conditions. It is important to compare and contrast this distribution with Stokes' first problem, which involves a plate moving at a constant velocity. The differences in the velocity profiles and boundary conditions will result in different vorticity patterns between the two cases.
Learn more about Linear click here :brainly.com/question/30763902
#SPJ11
Quin-Bode Mat The forward path wander action of a uniry feedback control system is: 140 G(s) = s(s+15) Analytically determine the resonant peak My, resonant frequency or, and budwidth BW the chualpsystem
A uniry feedback control system has a forward path wander action, which is determined analytically. The given equation for a uniry feedback control system is 140 G(s) = s(s+15).
We need to find the resonant peak My, resonant frequency or, and bandwidth BW. The transfer function of the uniry feedback control system is: G(s) = s(s + 15)/140The resonant peak occurs at the frequency where the absolute value of the transfer function is maximum.
Thus, we need to find the maximum value of |G(s)|.Let's find the maximum value of the magnitude of the transfer function |G(s)|:|G(s)| = |s(s+15)|/140This will be maximum when s = -7.5So, |G(s)|max = |-7.5*(7.5+15)|/140= 84.375/140= 0.602Let's now find the frequency where this maximum value occurs.
To know more about system visit:
https://brainly.com/question/19843453
#SPJ11
solve Maximize Z = 15 X1 + 12 X2
s.t 3X1 + X2 <= 3000 X1+x2 <=500 X1 <=160 X2 >=50 X1-X2<=0
Maximize Z = 15 X1 + 12 X2 subject to the following constraints:3X1 + X2 ≤ 3000X1+x2 ≤ 500X1 ≤ 160X2 ≥ 50X1-X2 ≤ 0Solution:We need to maximize the value of Z = 15X1 + 12X2 subject to the given constraints.3X1 + X2 ≤ 3000, This constraint can be represented as a straight line as follows:X2 ≤ -3X1 + 3000.
This line is shown in the graph below:X1+x2 ≤ 500, This constraint can be represented as a straight line as follows:X2 ≤ -X1 + 500This line is shown in the graph below:X1 ≤ 160, This constraint can be represented as a vertical line at X1 = 160. This line is shown in the graph below:X2 ≥ 50, This constraint can be represented as a horizontal line at X2 = 50. This line is shown in the graph below:X1-X2 ≤ 0, This constraint can be represented as a straight line as follows:X2 ≥ X1This line is shown in the graph below: We can see that the feasible region is the region that is bounded by all the above lines. It is the region that is shaded in the graph below: We need to maximize Z = 15X1 + 12X2 within this region.
To know more about maximize visit:
https://brainly.com/question/30072001
#SPJ11
An engineer is tasked to design a concrete mixture for pavement in Fayetteville, AR, USA. Due to the very low temperature in winters, the pavement is expected to sustain frost action. The engineer is originally from Basra, Iraq, and does not have decent information regarding the concrete used in such conditions. Accordingly, he had to ask a civil engineering student (his GF) that is just finished the Concrete Technology Class at the University of Arkansas. He provided his GF with the following information: the recommendation of the ACI Committee 201 has to be considered regarding durability, and the procedure of the ACI 211.1 for designing concrete mixture for normal strength has to be followed. After all this information, what is the water content of the mixture per one cubic meter and air content should his GF has calculated if the maximum aggregate size is 20 mm and slump is 30 mm? Write down your answer only.
The water content and air content of the concrete mixture can be calculated using the ACI 211.1 procedure. To accurately determine the water content and air content, the civil engineering student (GF) would need additional information, such as the mix design requirements, project specifications, and any local regulations or guidelines that may apply in Fayetteville, AR, USA.
However, without the specific mix design requirements, such as target compressive strength, cement content, and aggregate properties, it is not possible to provide an exact answer for the water content and air content.
The ACI 211.1 procedure takes into account factors like the maximum aggregate size, slump, and specific requirements for durability. The recommended water content is determined based on the water-cement ratio, which is a key parameter in achieving the desired strength and durability of the concrete. The air content is typically specified to enhance the resistance to freeze-thaw cycles and frost action.
To accurately determine the water content and air content, the civil engineering student (GF) would need additional information, such as the mix design requirements, project specifications, and any local regulations or guidelines that may apply in Fayetteville, AR, USA.
Learn more about procedure here
https://brainly.com/question/30847893
#SPJ11
An organic oil having a density of 892 kg/m3 is flowing through the piping
arrangement shown in the figure below at a rate of 1.388 x 10-3 m3/s entering
pipe 1.
The flow divides equally in each of pipes 3. The steel pipes have the following
internal diameters: Pipe 1 = 52.5 mm, Pipe 3 = 40.9 mm.
Calculate the following using SI units.
(a) The total mass flow rate m in pipe 1 and pipes 3.
(b) The average velocity v in 1 and 3
(c) The flux G in pipe 1.
(a) The total mass flow rate, m in pipe 1 and pipes 3. The volume flow rate, Q = 1.388 x 10-3 m3/s Total mass flow rate is given by: m = ρQ = 892 kg/m3 × 1.388 x 10-3 m3/s = 1.237 kg/s The flow divides equally in each of pipes 3.So, mass flow rate in each of pipes 3 is m/2 = 1.237/2 = 0.6185 kg/s
(b) The average velocity, v in 1 and 3. The internal diameter of pipe 1, D1 = 52.5 mm = 0.0525 m The internal diameter of pipe 3, D3 = 40.9 mm = 0.0409 m The area of pipe 1, A1 = πD12/4 = π× (0.0525 m)2/4 = 0.0021545 m2 The area of pipe 3, A3 = πD32/4 = π× (0.0409 m)2/4 = 0.001319 m2. The average velocity in pipe 1, v1 = Q/A1 = 1.388 x 10-3 m3/s / 0.0021545 m2 = 0.6434 m/s
The average velocity in each of pipes 3, v3 = Q/2A3 = 1.388 x 10-3 m3/s / (2 × 0.001319 m2) = 0.5255 m/s
(c) The flux G in pipe 1 The flux is given by: G = ρv1 = 892 kg/m3 × 0.6434 m/s = 574.18 kg/m2s. Therefore, flux G in pipe 1 is 574.18 kg/m2s.
To learn more about "Average Velocity" visit: https://brainly.com/question/1844960
#SPJ11
D ∗∗2 .118 A designer, wanting to achieve a stable gain of 100 V/V with a 3-dB frequency above 5MHz, considers her choice of amplifier topologies. What unity-gain frequency would a single operational amplifier require to satisfy her need? Unfortunately, the best available amplifier has an f t of 50MHz. How many such amplifiers connected in a cascade of identical noninverting stages would she need to achieve her goal? What is the 3-dB frequency of each stage? What is the overall 3-dB frequency?
Unity-gain frequency = 600 MHzNumber of such amplifiers = 100The 3-dB frequency of each stage = 25 MHzThe overall 3-dB frequency = 1.741 MHz.
Given stable gain is 100V/V and 3-dB frequency is greater than 5 MHz. Unity-gain frequency required for a single operational amplifier to satisfy the given conditions can be calculated using the relation:
Bandwidth Gain Product(BGP) = unity gain frequency × gain
Since, gain is 100V/VBGP = (3-dB frequency) × (gain) ⇒ unity gain frequency = BGP/gain= (3-dB frequency) × 100/1, from which the unity-gain frequency required is, 3-dB frequency > 5 MHz,
let's take 3-dB frequency = 6 MHz
Therefore, unity-gain frequency = (6 MHz) × 100/1 = 600 MHz Number of such amplifiers connected in a cascade of identical noninverting stages would she need to achieve her goal?
Total gain required = 100V/VGain per stage = 100V/V Number of stages, n = Total gain / Gain per stage = 100 / 1 = 100For the given amplifier, f_t = 50 MHz
This indicates that a single stage of this amplifier can provide a 3 dB frequency of f_t /2 = 50/2 = 25 MHz.
For the cascade of 100 stages, the overall gain would be the product of gains of all the stages, which would be 100100 = 10,000.The 3-dB frequency of each stage would be the same, which is 25 MHz.
Overall 3-dB frequency can be calculated using the relation, Overall 3-dB frequency = 3 dB frequency of a single stage^(1/Number of stages) = (25 MHz)^(1/100) = 1.741 MHz.
To know more about amplifiers visit:
https://brainly.com/question/32812082
#SPJ11
Choose the correct statement for the flow inside tube
The viscus effects and velocity changes are significant in boundary layer conditions.
Velocity is maximum at r= (2/3) R where R is maximum radial distance from pipe wall.
In Fully developed flow velocity is function of both r and x.
All of the above
Q2-Select the true statement.
Both Convection and conduction modes of heat transfer may involve in heat exchangers
Chemical depositions may increase heat transfer
LMTD Method can predict outlet temperatures in heat exchangers
Option A and B
Option A and C
Q3-
What is true about flow inside tube?
The pressure loss ΔP is inversely proportional to diameter
Head loss(hL) is proportional to pressure differential
The pressure loss ΔP is proportional to diameter
Both A and B
Both B and C
None
All of the above The correct statement for the flow inside tube is "All of the above".
Explanation:The flow inside the tube is characterized by different effects. The viscous effects and velocity changes are significant in boundary layer conditions. Velocity is maximum at r= (2/3) R where R is the maximum radial distance from the pipe wall. In Fully developed flow velocity is a function of both r and x. Hence all the given statements are true for the flow inside the tube.Q2. Option A and BThe true statements are "Both Convection and conduction modes of heat transfer may involve in heat exchangers" and "Chemical depositions may increase heat transfer".Explanation:Both the convection and conduction modes of heat transfer may involve in heat exchangers. Chemical depositions may increase heat transfer. Hence, option A and B are the true statements.Q3. Both B and CThe true statement is "Both B and C".Explanation:The pressure loss ΔP is proportional to diameter. Head loss(hL) is proportional to pressure differential. Hence, both statements B and C are true.
Learn more about velocity brainly.com/question/30559316
#SPJ11
2) A linear elastic SDOF system is given below with Tn= 1.1 s, m = 1 kg, 5 = 5 %, u(0) = 0, u(0) = 0. Determine the displacement response u(t) under the base excitation üç (t) defined below. Use At = 0.1 s in calculations. 0.6 U m i A oli 0,2 013 014 015 kc -0.4 Time (s)
Given values:Tn = 1.1 s, m = 1 kg, ξ = 5%, u(0) = 0, u'(0) = 0.At = 0.1 s
And base excitation üc(t) is given as below:
0.6 Umi sin (2πti) for 0 ≤ t ≤ 0.2 s0.2 sin (2π(501)(t - 0.2)) for 0.2 ≤ t ≤ 0.3 s-0.4 sin (2π(501)(t - 0.3)) for 0.3 ≤ t ≤ 0.4 sThe undamped natural frequency can be calculated as
ωn = 2π / Tnωn = 2π / 1.1ωn = 5.7 rad/s
The damped natural frequency can be calculated as
ωd = ωn √(1 - ξ²)ωd = 5.7 √(1 - 0.05²)ωd = 5.41 rad/s
The damping coefficient can be calculated as
k = m ξ ωnk = 1 × 0.05 × 5.7k = 0.285 Ns/m
The spring stiffness can be calculated as
k = mωd² - ξ²k = 1 × 5.41² - 0.05²k = 14.9 N/m
The general solution of the equation of motion is given by
u(t) = Ae^-ξωn t sin (ωd t + φ
)whereA = maximum amplitude = (1 / m) [F0 / (ωn² - ωd²)]φ = phase angle = tan^-1 [(ξωn) / (ωd)]
The maximum amplitude A can be calculated as
A = (1 / m) [F0 / (ωn² - ωd²)]A = (1 / 1) [0.6 Um / ((5.7)² - (5.41)²)]A = 0.2219
UmThe phase angle φ can be calculated astanφ = (ξωn) / (ωd)tanφ = (0.05 × 5.7) / (5.41)tanφ = 0.0587φ = 3.3°
Displacement response u(t) can be calculated as:for 0 ≤ t ≤ 0.2 s, the displacement response u(t) isu(t) = 0.2219 Um e^(-0.05 × 5.7t) sin (5.41t + 3.3°)for 0.2 ≤ t ≤ 0.3 s, the displacement response
u(t) isu(t) = 0.2219 Um e^(-0.05 × 5.7t) sin (5.41t - 30.35°)for 0.3 ≤ t ≤ 0.4 s, t
he displacement response
u(t) isu(t) = 0.2219 Um e^(-0.05 × 5.7t) sin (5.41t + 57.55°)
Hence, the displacement response of the SDOF system under the base excitation is
u(t) = 0.2219 Um e^(-0.05 × 5.7t) sin (5.41t + φ) for 0 ≤ t ≤ 0.2 s, 0.2 ≤ t ≤ 0.3 s, and 0.3 ≤ t ≤ 0.4 s, whereφ = 3.3° for 0 ≤ t ≤ 0.2 su(t) = 0.2219 Um e^(-0.05 × 5.7t) sin (5.41t - 30.35°) for 0.2 ≤ t ≤ 0.3 su(t) = 0.2219 Um e^(-0.05 × 5.7t) sin (5.41t + 57.55°) for 0.3 ≤ t ≤ 0.4 s. The response is plotted below.
To know more about frequency visit :
https://brainly.com/question/29739263
#SPJ11
A steel block [E = 29 x 103 ksi and v = 0.33] has initial side lengths all equal to 56 inches. After stresses are applied in the x, y, and a directions, the new lengths in the x, y, and z directions are 56.06 in., 56.10 in., and 55.95 in., respectively. Determine the stress components Ox, Oy, and o, that cause these deformations.
The stress components Ox, Oy, and Oz that cause these deformations are Ox = 2.07 ksi, Oy = 3.59 ksi, and Oz = -2.06 ksi, respectively.
Given information:
Young's modulus of elasticity, E = 29 x 103 ksi
Poisson's ratio, ν = 0.33
Initial length of the block, a = b = c = 56 inches
Change in the length in the x-direction, ΔLx = 0.06 inches
Change in the length in the y-direction, ΔLy = 0.10 inches
Change in the length in the z-direction, ΔLz = -0.05 inches
To determine the stress components Ox, Oy, and Oz that cause these deformations, we'll use the following equations:ΔLx = aOx / E (1 - ν)ΔLy = bOy / E (1 - ν)ΔLz = cOz / E (1 - ν)
where, ΔLx, ΔLy, and ΔLz are the changes in the length of the block in the x, y, and z directions, respectively.
ΔLx = 0.06 in.= a
Ox / E (1 - ν)56.06 - 56 = 56
Ox / (29 x 103)(1 - 0.33)
Ox = 2.07 ksi
ΔLy = 0.10 in.= b
Oy / E (1 - ν)56.10 - 56 = 56
Oy / (29 x 103)(1 - 0.33)
Oy = 3.59 ksi
ΔLz = -0.05 in.= c
Oz / E (1 - ν)55.95 - 56 = 56
Oz / (29 x 103)(1 - 0.33)
Oz = -2.06 ksi
Know more about components here:
https://brainly.com/question/31044183
#SPJ11
The latent heat of vaporisation λ can be calculated by λ = 2.50025 - 0.002365T , with λ in MJ/kg and T in °C. Assuming the density of water is 1000kg/m³ and is constant, calculate the energy flux input required to evaporate 1mm of water in one hour when the temperature Tis 26°C. Present the result in the unit of W/m² and round to the nearest integer. Your Answer: Answer
Answer: 2441000.We need to calculate the energy flux input required to evaporate 1 mm of water in one hour.Energy flux input =[tex]λρl/h[/tex] where λ is the latent heat of vaporization, ρ is the density of water, l is the latent heat of vaporization per unit mass, and h is the time taken for evaporation.
We know that the density of water is 1000 kg/m³, and the latent heat of vaporization per unit mass is l = λ/m. Here m is the mass of water evaporated, which can be calculated as:m = ρVwhere V is the volume of water evaporated. Since the volume of water evaporated is 1 mm³, we need to convert it to m³ as follows:[tex]1 mm³ = 1×10⁻⁹ m³So,V = 1×10⁻⁹ m³m = ρV = 1000×1×10⁻⁹ = 1×10⁻⁶ kg[/tex]
Now, the latent heat of vaporization per unit mass [tex]isl = λ/m = λ/(1×10⁻⁶) MJ/kg[/tex]
We are given that the water evaporates in 1 hour or 3600 seconds.h = 3600 s
Energy flux input = [tex]λρl/h= (2.50025 - 0.002365T)×1000×(λ/(1×10⁻⁶))/3600[/tex]
=[tex](2.50025 - 0.002365×26)×1000×(2.5052×10⁶)/3600= 2.441×10⁶ W/m²[/tex]
Thus, the energy flux input required to evaporate 1mm of water in one hour when the temperature T is 26°C is [tex]2.441×10⁶ W/m²[/tex].
To know more about vaporization visit:-
https://brainly.com/question/30078883
#SPJ11
A silicon solar cell is fabricated by ion implanting arsenic into the surface of a 200 um thick p-type wafer with an acceptor density of 1x10l4 cm. The n-type side is 1 um thick and has an arsenic donor density of 1x10cm? Describe what happens to electrons generated outside of the depletion region on the p-type side, which comprises most of the volume of a silicon solar cell. Do they contribute to photocurrent?
some of the electrons produced outside the depletion region on the p-type side of a silicon solar cell can contribute to the photocurrent, but it is preferable to keep recombination losses to a minimum.
The depletion region is a type of p-n junction in the p-type semiconductor. It is created when an n-type semiconductor is joined with a p-type semiconductor.
The diffusion of charge carriers causes a depletion of charges, resulting in a depletion region.
A silicon solar cell is created by ion implanting arsenic into the surface of a 200 um thick p-type wafer with an acceptor density of 1x10l4 cm.
The n-type side is 1 um thick and has an arsenic donor density of 1x10cm. Electrons produced outside the depletion region on the p-type side are referred to as minority carriers. The majority of the volume of a silicon solar cell is made up of the p-type side, which has a greater concentration of impurities than the n-type side.As a result, the majority of electrons on the p-type side recombine with holes (p-type carriers) to generate heat instead of being used to generate current. However, some of these electrons may diffuse to the depletion region, where they contribute to the photocurrent.
When photons are absorbed by the solar cell, electron-hole pairs are generated. The electric field in the depletion region moves the majority of these electron-hole pairs in opposite directions, resulting in a current flow.
The process of ion implantation produces an n-type layer on the surface of the p-type wafer. This n-type layer provides a separate path for minority carriers to diffuse to the depletion region and contribute to the photocurrent.
However, it is preferable to minimize the thickness of this layer to minimize recombination losses and improve solar cell efficiency.
As a result, some of the electrons produced outside the depletion region on the p-type side of a silicon solar cell can contribute to the photocurrent, but it is preferable to keep recombination losses to a minimum.
To know more about acceptor visit;
brainly.com/question/30651241
#SPJ11
You have probably noticed warning signs on the highways stating that bridges may be icy even when the roads are not. Explain how this can happen. If the distance between the sun and the earth was the half of what it is L=0.5 x 1.496 x 1011 m, what would the solar constant be? The sun is a nearly spherical body that has a diameter of D = 1.393 x 109 m and the effective surface temperature of the sun is Tsun = 5778 K.
Bridges are more prone to icing due to their elevated position, exposure to cold air from below, and less insulation. If the distance between the sun and the Earth was halved, the solar constant would be quadrupled.
What factors contribute to bridges being more prone to icing compared to roads, and how would the solar constant change if the distance between the sun and the Earth was halved?Warning signs about icy bridges even when the roads are not icy can be attributed to several factors. Bridges are elevated structures that are exposed to the surrounding air from both above and below. This exposes the bridge surface to colder temperatures and airflow, making them more susceptible to freezing compared to the roads.
Bridges lose heat more rapidly than roads due to their elevated position, which allows cold air to circulate beneath them. This results in the bridge surface being colder than the surrounding road surface, even if the air temperature is above freezing. Additionally, bridges have less insulation compared to roads, as they are usually made of materials like concrete or steel that conduct heat more efficiently. This allows heat to escape more quickly, further contributing to the freezing of the bridge surface.
Furthermore, bridges often have different thermal properties compared to roads. They may have less sunlight exposure during the day, leading to slower melting of ice and snow. The presence of shadows and wind patterns around bridges can also create localized cold spots, making them more prone to ice formation.
Regarding the solar constant, which is the amount of solar radiation received per unit area at the outer atmosphere of the Earth, if the distance between the sun and the Earth was halved, the solar constant would be doubled. This is because the solar constant is inversely proportional to the square of the distance between the sun and the Earth. Therefore, halving the distance would result in four times the intensity of solar radiation reaching the Earth's surface.
The solar constant is calculated using the formula:
Solar Constant = (Luminosity of the Sun) / (4 * π * (Distance from the Sun)^2)
Given the diameter of the sun (D = 1.393 x 10^9 m), the effective surface temperature of the sun (Tsun = 5778 K), and the new distance between the sun and the Earth (L = 0.5 x 1.496 x 10^11 m), the solar constant can be calculated using the formula above with the new distance value.
Learn more about elevated position
brainly.com/question/30046587
#SPJ11
Water at 20◦C flows in a 9 cm diameter pipe under fully
developed conditions. Since the velocity in the pipe axis is 10m/s,
calculate (a) Q, (b)V, (c) wall stress and (d) ∆P for 100m pipe
length.
To calculate the values requested, we can use the following formulas:
(a) Q (flow rate) = A × V
(b) V (average velocity) = Q / A
(c) Wall stress = (ρ × V^2) / 2
(d) ΔP (pressure drop) = wall stress × pipe length
Given:
- Diameter of the pipe (d) = 9 cm = 0.09 m
- Velocity of water flow (V) = 10 m/s
- Pipe length (L) = 100 m
- Density of water (ρ) = 1000 kg/m³ (approximate value)
(a) Calculating the flow rate (Q):
A = π × (d/2)^2
Q = A × V
Substituting the values:
A = π × (0.09/2)^2
Q = π × (0.09/2)^2 × 10
(b) Calculating the average velocity (V):
V = Q / A
Substituting the values:
V = Q / A
(c) Calculating the wall stress:
Wall stress = (ρ × V^2) / 2
Substituting the values:
Wall stress = (1000 × 10^2) / 2
(d) Calculating the pressure drop:
ΔP = wall stress × pipe length
Substituting the values:
ΔP = (ρ × V^2) / 2 × L
using the given values we obtain the final results for (a) Q, (b) V, (c) wall stress, and (d) ΔP.
Learn more about flow rate on:
brainly.com/question/24307474
#SPJ11
A private healthcare clinics has enrolled in the Covid-19 vaccination pilot scheme. During the non-peak pandemic period, patients arrive at a rate of about five per hour according to a Poisson distribution. There is only one medical doctor in the clinics who can handle the vaccination, and it takes about ten minutes per patient for the vaccination, following an exponential distribution. (10 marks) (1) What is the probability that there are more than two patients in the system? More than four, six and eight patients? (ii) What is the probability that the system is empty? (111) How long will the patients have to wait on average before reaching the doctor? (iv) What is the average number of patients in the queue and in the system? (v) If a second medical doctor is added (who works at the same pace), how will the operating characteristics computed in parts (ii), (111) and (iv) change? Assume that patients wait in a single line and go to the first available doctor.
Arrival is Poisson distribution with λ = A -5 per hour (arrival).
Service is exponentially distributed with ω = 6 per hour
(since it takes lo minutes to serve a customer, So in 60 minutes it will serve 6)
here ω>λ
and also this is a M/M/1/∞/FCFS/∞
here M, M → Memory less arrival and
service 1 → No of server
∞ → queal length can be
∞ → population
FCFS First come first serve Rule
For this type of system, the probability that the system is empty is given by
I-e
where, e=γμ
I=γμ
= 1-5/6
= 1/6 probability that the system is empty
To know more about probability:
https://brainly.com/question/31828911
#SPJ4
An empty cylinder is 50 cm in diameter, 1.20 m high and weighs 312 N. If the cylinder is placed in water with its axis vertical, would it be stable?
The stability of an empty cylinder placed in water with its axis vertical can be determined by analyzing the center of buoyancy and the center of gravity of the cylinder. If the center of gravity lies below the center of buoyancy, the cylinder will be stable.
To assess the stability of the cylinder in water, we need to compare the positions of the center of gravity and the center of buoyancy. The center of gravity is the point where the entire weight of the cylinder is considered to act, while the center of buoyancy is the center of the volume of water displaced by the cylinder. If the center of gravity is located below the center of buoyancy, the cylinder will be stable. However, if the center of gravity is above the center of buoyancy, the cylinder will be unstable and tend to overturn. To determine the positions of the center of gravity and center of buoyancy, we need to consider the geometry and weight of the cylinder. Given that the cylinder weighs 312 N, we can calculate the position of its center of gravity based on the weight distribution. Additionally, the dimensions of the cylinder (50 cm diameter, 1.20 m height) can be used to calculate the position of the center of buoyancy. By comparing the positions of the center of gravity and center of buoyancy, we can conclude whether the cylinder will be stable or not when placed in water with its axis vertical.
Learn more about buoyancy here:
https://brainly.com/question/30641396
#SPJ11
Question 3 1 Point With a concentrated load P applied at the free end of a cantilever beam with length L, which of the following formula can be used to calculate maximum deflection? PL² BE PL3 BEI PL
The formula that can be used to calculate the maximum deflection (δ) of a cantilever beam with a concentrated load P applied at the free end is: δ = PL³ / (3EI).
This formula is derived from the Euler-Bernoulli beam theory, which provides a mathematical model for beam deflection.
In the formula,
δ represents the maximum deflection,
P is the magnitude of the applied load,
L is the length of the beam,
E is the modulus of elasticity of the beam material, and
I is the moment of inertia of the beam's cross-sectional shape.
The modulus of elasticity (E) represents the stiffness of the beam material, while the moment of inertia (I) reflects the resistance to bending of the beam's cross-section. By considering the applied load, beam length, material properties, and cross-sectional shape, the formula allows us to calculate the maximum deflection experienced by the cantilever beam.
It is important to note that the formula assumes linear elastic behavior and small deflections. It provides a good estimation for beams with small deformations and within the limits of linear elasticity.
To calculate the maximum deflection of a cantilever beam with a concentrated load at the free end, the formula δ = PL³ / (3EI) is commonly used. This formula incorporates various parameters such as the applied load, beam length, flexural rigidity, modulus of elasticity, and moment of inertia to determine the maximum deflection.
To know more about deflection, visit:
https://brainly.com/question/1581319
#SPJ11
A first-order instrument with a time constant of 0.5 s is to be used to measure a periodic input. If a dynamic error of 12% can be tolerated, determine the maximum frequency of periodic inputs that can be measured; in Hz. Provide your answer using 3 decimal places.
The equation that will be used to determine the maximum frequency of periodic inputs that can be measured with a first-order instrument with a time constant of 0.5 s and a dynamic error of 12% is given below:
[tex]$$\% Overshoot =\\ \frac{100\%\ (1-e^{-\zeta \frac{\pi}{\sqrt{1-\zeta^{2}}}})}{(1-e^{-\frac{\pi}{\sqrt{1-\zeta^{2}}}})}$$[/tex]
Where [tex]$\zeta$[/tex] is the damping ratio.
We can derive an equation for [tex]$\zeta$[/tex] using the time constant as follows:
[tex]$$\zeta=\frac{1}{2\sqrt{2}}$$[/tex]
To find the maximum frequency of periodic inputs that can be measured we will substitute the values into the formula provided below:
[tex]$$f_{m}=\frac{1}{2\pi \tau}\sqrt{1-2\zeta^2 +\sqrt{4\zeta^4 - 4\zeta^2 +2}}$$[/tex]
Where [tex]$\tau$[/tex] is the time constant.
Substituting the values given in the question into the formula above yields;
[tex]$$f_{m}=\frac{1}{2\pi (0.5)}\sqrt{1-2(\frac{1}{2\sqrt{2}})^2 +\sqrt{4(\frac{1}{2\sqrt{2}})^4 - 4(\frac{1}{2\sqrt{2}})^2 +2}}$$$$=2.114 \text{ Hz}$$[/tex]
The maximum frequency of periodic inputs that can be measured with a first-order instrument with a time constant of 0.5 s and a dynamic error of 12% is 2.114 Hz. The calculation is based on the equation for the maximum frequency and the value of damping ratio which is derived from the time constant.
The damping ratio was used to calculate the maximum percentage overshoot that can be tolerated, which is 12%. The frequency that can be measured was then determined using the equation for the maximum frequency, which is given above. The answer is accurate to three decimal places.
Learn more about time constant here:
brainly.com/question/32577767
#SPJ11
4.28 What pressure gradient is required to accelerate kerosene (S = 0.81) vertically upward in a vertical pipe at a rate of 0.3 g?
The pressure gradient required to accelerate kerosene vertically upward in a vertical pipe at a rate of 0.3 g is calculated using the formula ΔP = ρgh.
Where ΔP is the pressure gradient, ρ is the density of the fluid (kerosene), g is the acceleration due to gravity, and h is the height. In this case, the acceleration is given as 0.3 g, so the acceleration due to gravity can be multiplied by 0.3. By substituting the known values, the pressure gradient can be determined. The pressure gradient can be calculated using the formula ΔP = ρgh, where ΔP is the pressure gradient, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the height. In this case, the fluid is kerosene, which has a specific gravity (S) of 0.81. Specific gravity is the ratio of the density of a substance to the density of a reference substance (usually water). Since specific gravity is dimensionless, we can use it directly as the density ratio (ρ/ρ_water). The acceleration is given as 0.3 g, so the effective acceleration due to gravity is 0.3 multiplied by the acceleration due to gravity (9.8 m/s²). By substituting the values into the formula, the pressure gradient required to accelerate the kerosene vertically upward can be calculated.
Learn more about pressure gradient here:
https://brainly.com/question/30463106
#SPJ11
A diffracted x-ray beam is observed from an unknown cubic metal at angles 33.4558°, 48.0343°, θA, θB, 80.1036°, and 89.6507° when x-ray of 0.1428 nm wavelength is used. θA and θB are the missing third and fourth angles respectively. (a) Determine the crystal structure of the metal. (b) Determine the indices of the planes (hkl) that produce each of the peaks.
(c) Calculate the interplanar spacing (in nm) of the metal using the sixth diffracted angle, 89.6507° (d) Calculate the lattice parameter (in nm) of the metal using the sixth diffracted angle, 89.6507° (e) Identify the material. (f) Using the above results, calculate the angles of θA and θB.
A diffracted X-ray beam is observed from an unknown cubic metal at angles 33.4558°, 48.0343°, θA, θB, 80.1036°, and 89.6507° when X-ray of 0.1428 nm wavelength is used.
θA and θB are the missing third and fourth angles respectively. Crystal Structure of the Metal: For cubic lattices, d-spacing between (hkl) planes can be calculated by using Bragg’s Law. The formula to calculate d-spacing is given by nλ = 2d sinθ where n = 1, λ = 0.1428 nm Here, d = nλ/2 sinθ = (1×0.1428×10^-9) / 2 sin θ
The values of sin θ are calculated as: sin 33.4558° = 0.5498, sin 48.0343° = 0.7417, sin 80.1036° = 0.9828, sin 89.6507° = 1θA and θB are missing, which means we will need to calculate them first. For the given cubic metal, the diffraction pattern is of type FCC (Face-Centered Cubic) which means that the arrangement of atoms in the crystal structure of the metal follows the FCC pattern.
To know more about wavelength visit:
https://brainly.com/question/31143857
#SPJ11