The kinetic energy acquired by the neutron in the fusion reaction
²₁H + ³₁H → ⁴₂He + ¹₀n is approximately 17.6 MeV (million electron volts).
In a fusion reaction, two nuclei combine to form a new nucleus. In this case, a deuteron (²₁H) and a triton (³₁H) fuse to produce helium-4 (⁴₂He) and a neutron (¹₀n).
To determine the kinetic energy acquired by the neutron, we need to consider the conservation of energy and momentum in the reaction. Assuming the deuteron and triton are initially at rest, their total initial momentum is zero.
By conservation of momentum, the total momentum of the products after the fusion reaction is also zero. Since helium-4 is a stable nucleus, it does not acquire any kinetic energy. Therefore, the kinetic energy acquired by the neutron will account for the total initial kinetic energy.
The energy released in the reaction can be calculated using the mass-energy equivalence principle, E = mc², where E represents energy, m represents mass, and c is the speed of light.
The mass difference between the initial reactants (deuteron and triton) and the final products (helium-4 and neutron) is given by:
Δm = (m⁴₂He + m¹₀n) - (m²₁H + m³₁H)
The kinetic energy acquired by the neutron is then:
K.E. = Δm c²
Substituting the atomic masses of the particles and the speed of light into the equation, we can calculate the kinetic energy.
Using the atomic masses: m²₁H = 1.008665 u, m³₁H = 3.016049 u, m⁴₂He = 4.001506 u, and converting to kilograms (1 u = 1.66 × 10⁻²⁷ kg), the calculation gives:
Δm = (4.001506 u + 1.674929 u) - (2.016331 u + 3.016049 u)
≈ 0.643 u
K.E. = (0.643 u) × (1.66 × 10⁻²⁷ kg/u) × (3.00 × 10⁸ m/s)²
≈ 17.6 MeV
Therefore, the kinetic energy acquired by the neutron in the fusion reaction is approximately 17.6 MeV.
In the fusion reaction ²₁H + ³₁H → ⁴₂He + ¹₀n, the neutron acquires a kinetic energy of approximately 17.6 MeV. This value is obtained by calculating the mass difference between the initial reactants and the final products using the mass-energy equivalence principle, E = mc². The conservation of momentum ensures that the total initial momentum is equal to the total final momentum, allowing us to consider the kinetic energy acquired by the neutron as accounting for the total initial kinetic energy.
Understanding the energy released and the kinetic energy acquired by particles in fusion reactions is essential in fields such as nuclear physics and energy research, as it provides insights into the dynamics and behavior of atomic nuclei during nuclear reactions.
To know more about kinetic energy ,visit:
https://brainly.com/question/8101588
#SPJ11
What is the wavelength of light in nm falling on double slits
separated by 2.20 µm if the third-order maximum is at an angle of
65.0°?
In the double-slit experiment, a coherent light source is shone through two parallel slits, resulting in an interference pattern on a screen. The interference pattern arises from the wave nature of light.
The term "wavelength" refers to the distance between two corresponding points on a wave, such as two adjacent peaks or troughs. In the context of the double-slit experiment, the "wavelength of light used" refers to the characteristic wavelength of the light source employed in the experiment.
To find the wavelength of light falling on double slits, we can use the formula for the path difference between the two slits:
d * sin(θ) = m * λ
Where:
d is the separation between the slits (2.20 µm = 2.20 × 10^(-6) m)
θ is the angle of the third-order maximum (65.0° = 65.0 × π/180 radians)
m is the order of the maximum (in this case, m = 3)
λ is the wavelength of light we want to find
We can rearrange the formula to solve for λ:
λ = (d * sin(θ)) / m
Plugging in the given values:
λ = (2.20 × 10⁻⁶ m) * sin(65.0 × π/180) / 3
Evaluating this expression gives us the wavelength of light falling on the double slits.
To know more about double slit experiment visit:
https://brainly.com/question/29381229
#SPJ11
1) What is the energy transformed in a 10.0 Ohm resistor when 100.0 V DC is applied for 5.00-minutes. 2) A 12.0 V DC supply is connected to two resistors in series. The first is 0.400 ks and the second is 0.800 kg. What is the current through and the potential difference across each resistor? 3) An 18.0 V source is connected to three resistors in parallel. These are 3.00 £2, 6.00 2 and 9.00 22 what are the currents through each resistor and the power converted in each resistor? Show that the sum of these currents is equal to the current through a single equivalent resistor of 1.64 22 (to 3 s.f.) connected to an 18.0 V source. What is the power converted in this resistor? 4) An AC current with amplitude 2.00 A flows through a 10 Ohm resistor. What is the average power transformed in the resistor?
The average power transformed in the 10 Ω resistor is 20 W.
1. The energy transformed in a 10.0 Ohm resistor when 100.0 V DC is applied for 5.00-minutes is 30,000 J.
2. The current through the first resistor is 30 A and the potential difference across it is 12 V.
The current through the second resistor is 15 A and the potential difference across it is 12 V.
3. The current through the 3.00 Ω resistor is 6 A, the current through the 6.00 Ω resistor is 3 A, and the current through the 9.00 Ω resistor is 2 A.
The power converted in the 3.00 Ω resistor is 108 W, the power converted in the 6.00 Ω resistor is 54 W, and the power converted in the 9.00 Ω resistor is 32 W.
The sum of these currents is 11 A, which is equal to the current through a single equivalent resistor of 1.64 Ω (to 3 s.f.) connected to an 18.0 V source.
The power converted in this resistor is 356 W.4.
The average power transformed in the 10 Ω resistor is 20 W.
To know more about average power visit:
https://brainly.com/question/17113976
#SPJ11
6 A speedometer estimates linear speed based on angular speed of tires. If you switch to speed. larger tires, then the speedometer will read a lower linear speed than the true linear 7. Two spheres have the same mass and radius but one is hollow. If you roll both of them from the same height, the hollow one reaches to the ground later. 8. Two disks spin with the same angular momentum, but disk 1 has more Kinetic Energy than disk 2. Disk two has a larger moment of inertia. 9. You hold a spinning bicycle wheel while standing on a turntable. If you flip the wheel over, the turntable will move in the same direction. 10. If you used 5000 joules to throw a ball, it would travel faster if you threw in such a way that it is rotating
6. When switching to larger tires, the speedometer will display a lower linear speed than the true linear speed. This is because larger tires have a greater circumference, resulting in each revolution covering a longer distance compared to the original tire size.
The speedometer is calibrated based on the original tire size and assumes a certain distance per revolution. As a result, with larger tires, the speedometer underestimates the actual linear speed.
7. Two spheres with the same mass and radius are rolled from the same height. The hollow sphere reaches the ground later than the solid sphere. This is due to the hollow sphere having less mass and, consequently, less inertia. It requires less force to accelerate the hollow sphere compared to the solid sphere. As a result, the hollow sphere accelerates slower and takes more time to reach the ground.
8. Two disks with the same angular momentum are compared, but disk 1 has more kinetic energy than disk 2. Disk 2 has a larger moment of inertia, which is a measure of the resistance to rotational motion. The disk with greater kinetic energy has a higher velocity than the disk with lower kinetic energy. While both disks possess the same angular momentum, their different moments of inertia contribute to the difference in kinetic energy.
9. When a spinning bicycle wheel is flipped over while standing on a turntable, the turntable moves in the same direction. This phenomenon is explained by the conservation of angular momentum. Flipping the wheel changes its angular momentum, and to conserve angular momentum, the turntable moves in the opposite direction to compensate for the change.
10. If a ball is thrown with 5000 joules of energy and it is rotating, it will travel faster. The conservation of angular momentum states that when the net external torque acting on a system is zero, angular momentum is conserved. As the ball is thrown with spin, it possesses angular momentum that remains constant. The rotation of the ball does not affect its forward velocity, which is determined by the initial kinetic energy. However, the rotation influences the trajectory of the ball.
To learn more about speedometer, you can visit the following link:
brainly.com/question/32573142
#SPJ11
3/4 Points (a) Atanar show at tes directly toward the stands at a speed of 1130 kn, emitting a frequency of 60 H on a day when the speed of sound is 342 m/s. What frequency in Ha) is received by the observers (b) What tregunty (in ) do they receives the planetes directly away from them?
The frequency received by the observers is 55.78 Hz. The frequency the observers receive from the planetes directly away from them is 91.43 Hz.
(a) Here is the formula to determine the received frequency:f' = f (v±v₀) / (v±vs), wherev₀ is the speed of the observer,v is the speed of sound,f is the frequency of the source, andvs is the speed of the source. Here is the solution to part (a): The speed of sound is given as 342 m/s. Atanar is moving directly towards the stands, so we have to add the speed of Atanar to the speed of sound. The speed of Atanar is 1130 km/h, which is 313.8889 m/s when converted to m/s.v = 342 m/s + 313.8889 m/s = 655.8889 m/sUsing the formula,f' = f (v±v₀) / (v±vs),we get:f' = 60 Hz (655.8889 m/s) / (655.8889 m/s + 0 m/s)f' = 55.78 HzSo, the frequency received by the observers is 55.78 Hz.
(b) If Atanar is moving directly away from the stands, then we subtract the speed of Atanar from the speed of sound. Using the formula:f' = f (v±v₀) / (v±vs),we get:f' = 60 Hz (655.8889 m/s) / (655.8889 m/s - 0 m/s)f' = 91.43 Hz.Therefore, the frequency the observers receive from the planetes directly away from them is 91.43 Hz.
Learn more on frequency here:
brainly.com/question/33270290
#SPJ11
Transcribed image text: A rotating fan completes 1150 revolutions every minute. Consider the tip of the blade, at a radius of 120 cm. What is the linear distance moved when the tip moves through one revolution? What is the tip's speed and the magnitude of its acceleration? What is the period of the motion? Sebuah kipas yang berputar membuat 1150 putaran lengkap seminit. Pertimbangkan hujung bilah kipas, pada jejari 120 cm Berapakah jarak yang dibuat oleh hujung bilah kipas di dalam sutu putaran? Berapakah laju dan magnitud pecutan hujung bilah kipas? Berapakah tempoh gerakan? [16 marks / 16 markah] (a Light from a helium-neon laser (630 nm) is incident on a pair of slits. Interference pattern can be seen on a screen 2.0 m from the slits and the bright fringes are separated by 1.40 cm. What is the slit separation? A grating has 5000 lines per cm. Determine the angular separation between the central maximum and the second-order bright fringe if the wavelength of violet light is 410 nm. (b) (a) Cahaya dari helium-neon laser (630 nm) melalui sepasang celahan. Corak interferens dapat dilihat pada layar yang jauhnya 2.0 m dari celahan dan pinggir-pinggir terang dipisahkan sejauh 1.40 cm. Berapakah jarak pisahan antara celahan? Satu parutan mempunyai 5000 garisan per cm. Tentukan sudut pemisahan di antara pinggir terang pusat dengan pinggir terang tertib kedua jika panjang gelombang cahaya ungu ialah 410 nm. [16 marks / 16 markah] (b)
When the rotating fan completes one revolution, the tip of the blade moves a linear distance equal to the circumference of a circle with a radius of 120 cm. The tip's speed is the linear distance moved per unit of time, and its acceleration can be calculated using the formula for centripetal acceleration. The period of motion is the time taken for one complete revolution.
To find the linear distance moved by the tip of the blade in one revolution, we can use the formula for the circumference of a circle: C = 2πr, where r is the radius. Substituting the given radius of 120 cm, we have C = 2π(120 cm) = 240π cm.
The tip's speed is the linear distance moved per unit of time. Since the fan completes 1150 revolutions per minute, we can calculate the speed by multiplying the linear distance moved in one revolution by the number of revolutions per minute and converting to a consistent unit. Let's convert minutes to seconds by dividing by 60:
Speed = (240π cm/rev) * (1150 rev/min) * (1 min/60 s) = 4600π/3 cm/s.
To find the magnitude of the tip's acceleration, we can use the formula for centripetal acceleration: a = v²/r, where v is the speed and r is the radius. Substituting the given values, we have:
Acceleration = (4600π/3 cm/s)² / (120 cm) = 211200π²/9 cm/s².
The period of motion is the time taken for one complete revolution. Since the fan completes 1150 revolutions per minute, we can calculate the period by dividing the total time in minutes by the number of revolutions:
Period = (1 min)/(1150 rev/min) = 1/1150 min/rev.
In summary, when the fan completes one revolution, the tip of the blade moves a linear distance of 240π cm. The tip's speed is 4600π/3 cm/s, and the magnitude of its acceleration is 211200π²/9 cm/s². The period of motion is 1/1150 min/rev.
To know more about centripetal acceleration refer here:
https://brainly.com/question/32812920#
#SPJ11
Does Archimedes’ principle tell us that if an immersed object
displaces 5 N of fluid, the buoyant force on the object is 5 N?.
Explain why.
Archimedes' principle tells us that if an immersed object displaces more than 100N of fluid, the buoyant force on the object is equal to the weight of the fluid displaced.
Therefore, if an object displaces 5 N of fluid, the buoyant force on the object will be less than 5 N.The reason for this is because the buoyant force is equal to the weight of the fluid displaced by the object. In other words, the weight of the fluid that is displaced by the object determines the buoyant force on the object. If the object is only displacing 5 N of fluid, then the buoyant force will be less than 5 N because the weight of the fluid displaced is less than 5 N.Archimedes' principle is important for understanding the behavior of objects in fluids.
It helps us to understand why objects float or sink and how the buoyant force on an object is related to the weight of the fluid displaced.
To know more about force visit:
https://brainly.com/question/30507236
#SPJ11
2) A gas with initial state variables p,, V, and T, expands isothermally until V2 = 2V 1 a) What is the value for T? b) What about p2? c) Create graphical representations that are consistent with your responses in a) and b).
This is consistent with the answer to part b).
a) The value for T remains constant.
This is because an isothermal process is one in which the temperature is kept constant.
b) The value for p2 decreases.
This is because the volume of the gas increases, which means that the pressure must decrease in order to keep the temperature constant.
c) The following graph shows the relationship between pressure and volume for an isothermal expansion:
The pressure decreases as the volume increases.
This is consistent with the answer to part b).
Learn more about consistent with the given link,
https://brainly.com/question/15654281
#SPJ11
A uniform solid sphere of radius r = 0.420 m and mass m = 15.5 kg turns clockwise about a vertical axis through its center (when viewed from above), at an angular speed of 2.80 rad/s. What is its vector angular momentum about this axis?
The vector angular momentum of the solid sphere rotating about a vertical axis through its center is approximately 1.87 kg·m²/s.
To calculate the vector angular momentum of a solid sphere rotating about a vertical axis through its center, we can use the formula:
L = I * ω
where:
L is the vector angular momentum,
I is the moment of inertia, and
ω is the angular speed.
Given:
Radius of the solid sphere (r) = 0.420 m,
Mass of the solid sphere (m) = 15.5 kg,
Angular speed (ω) = 2.80 rad/s.
The moment of inertia for a solid sphere rotating about an axis through its center is given by:
I = (2/5) * m * r^2
Substituting the given values:
I = (2/5) * 15.5 kg * (0.420 m)^2
Now we can calculate the vector angular momentum:
L = I * ω
Substituting the calculated value of I and the given value of ω:
L = [(2/5) * 15.5 kg * (0.420 m)^2] * 2.80 rad/s
Calculating this expression gives:
L ≈ 1.87 kg·m²/s
Therefore, the vector angular momentum of the solid sphere rotating about a vertical axis through its center is approximately 1.87 kg·m²/s.
Learn more about angular momentum from the given link
https://brainly.com/question/4126751
#SPJ11
Two conducting rods are moving at the same speed through a uniform magnetic field. They are parallel to each other, and oriented so that their lengths, velocity vectors, and the magnetic field itself form a set of 3 perpendicular vectors. Rod 1 is twice as long as rod 2, therefore the voltage drop between the ends of rod 1 will be how many times the voltage drop between the ends of rod 2?
The voltage drop between the ends of rod 1 will be four times the voltage drop between the ends of rod 2.
The voltage induced in a conductor moving through a magnetic field is given by the equation V = B * L * v, where V is the voltage, B is the magnetic field strength, L is the length of the conductor, and v is the velocity of the conductor. In this scenario, both rods are moving at the same speed through the same magnetic field.
Since rod 1 is twice as long as rod 2, its length L1 is equal to 2 times the length of rod 2 (L2). Therefore, the voltage drop between the ends of rod 1 (V1) will be equal to 2 times the voltage drop between the ends of rod 2 (V2), as the length factor is directly proportional.
However, the voltage drop also depends on the magnetic field strength and the velocity of the conductor. Since both rods are moving at the same speed through the same magnetic field, the magnetic field strength and velocity factors are the same for both rods.
Therefore, the voltage drop between the ends of rod 1 (V1) will be two times the voltage drop between the ends of rod 2 (V2) due to the difference in their lengths.
Learn more about voltage drop click here: brainly.com/question/28164474
#SPJ11
3) A Cell whose internal resistance 1s 0.52 delivers a Current of LA to an external register. The lost voltage of the cell 12
Answer: I had they same qustion
Explanation:
A parallel-plate capacitor has plates with area 2.30x10-² m² separated by 2.00 mm of Teflon. ▾ Part A Calculate the charge on the plates when they are charged to a potential difference of 13.0 V. Express your answer in coulombs. LIVE ΑΣΦ ▼ Submit Request Answer Part B E= Use Gauss's law to calculate the electric field inside the Teflon. Express your answer in newtons per coulomb. 195| ΑΣΦ Submit Request Answer Part C BIL B ? ? C N/C Use Gauss's law to calculate the electric field if the voltage source is disconnected and the Teflon is removed. Express your answer in newtons per coulomb.
A. The charge on the plates of the parallel-plate capacitor, when charged to a potential difference of 13.0 V, is 5.95 x 10⁻⁷ C (coulombs).
B. The electric field inside the Teflon, calculated using Gauss's law, is 6.50 x 10⁶ N/C (newtons per coulomb).
C. When the voltage source is disconnected and the Teflon is removed, the electric field becomes zero since there are no charges or electric field present.
A. To calculate the charge on the plates, we use the formula Q = C · V, where Q is the charge, C is the capacitance, and V is the potential difference. The capacitance of a parallel-plate capacitor is given by C = ε₀ · (A/d), where ε₀ is the permittivity of free space, A is the area of the plates, and d is the distance between the plates. Substituting the given values, we find the charge on the plates to be 5.95 x 10⁻⁷ C.
B. To calculate the electric field inside the Teflon using Gauss's law, we consider a Gaussian surface between the plates. Since Teflon is a dielectric material, it has a relative permittivity εᵣ. Gauss's law states that the electric flux through a closed surface is equal to the charge enclosed divided by the permittivity of the material.
Since the electric field is uniform between the plates, the flux is simply E · A, where E is the electric field and A is the area of the plates. Setting the electric flux equal to Q/ε₀, where Q is the charge on the plates, we can solve for the electric field E. Substituting the given values, we find the electric field inside the Teflon to be 6.50 x 10⁶ N/C.
C. When the voltage source is disconnected and the Teflon is removed, the capacitor is no longer connected to a potential difference, and therefore, no charges are present on the plates. According to Gauss's law, in the absence of any charges, the electric field is zero. Thus, when the Teflon is removed, the electric field becomes zero between the plates.
To know more about parallel-plate capacitor refer here:
https://brainly.com/question/30906246#
#SPJ11
(a) A wire that is 1.50 m long at 20.0°C is found to increase in length by 1.90 cm when warmed t 420.0'C. Compute its average coefficient of linear expansion for this temperature range. (b) The wire i stretched just taut (zero tension) at 420.0*C. Find the stress in the wire if it is cooled to 20.0°C withou being allowed to contract. Young's modulus for the wire is 2.0 x 10^11 Pa.
(a) Thee average coefficient of linear expansion for this temperature range is approximately 3.17 x 10^(-5) / °C. (b) The stress in the wire, when cooled to 20.0°C without being allowed to contract, is approximately 2.54 x 10^3 Pa.
(a) The average coefficient of linear expansion (α) can be calculated using the formula:
α = (ΔL / L₀) / ΔT
Where ΔL is the change in length, L₀ is the initial length, and ΔT is the change in temperature.
Given that the initial length (L₀) is 1.50 m, the change in length (ΔL) is 1.90 cm (which is 0.019 m), and the change in temperature (ΔT) is 420.0°C - 20.0°C = 400.0°C, we can substitute these values into the formula:
α = (0.019 m / 1.50 m) / 400.0°C
= 0.01267 / 400.0°C
= 3.17 x 10^(-5) / °C
(b) The stress (σ) in the wire can be calculated using the formula:
σ = E * α * ΔT
Where E is the Young's modulus, α is the coefficient of linear expansion, and ΔT is the change in temperature.
Given that the Young's modulus (E) is 2.0 x 10^11 Pa, the coefficient of linear expansion (α) is 3.17 x 10^(-5) / °C, and the change in temperature (ΔT) is 420.0°C - 20.0°C = 400.0°C, we can substitute these values into the formula:
σ = (2.0 x 10^11 Pa) * (3.17 x 10^(-5) / °C) * 400.0°C
= 2.0 x 10^11 Pa * 3.17 x 10^(-5) * 400.0
= 2.54 x 10^3 Pa.
To learn more about the linear expansion, click here: https://brainly.com/question/32547144
#SPJ11
A student measured the mass of a meter stick to be 150 gm. The student then placed a knife edge on 30-cm mark of the stick. If the student placed a 500-gm weight on 5-cm mark and a 300-gm weight on somewhere on the meter stick, the meter stick then was balanced. Where (cm mark) did the student place the 300- gram weight?
Therefore, the student placed the 300-gram weight at 38.33 cm mark to balance the meter stick.
Given data:A student measured the mass of a meter stick to be 150 gm.
A knife edge was placed on 30-cm mark of the stick.
A 500-gm weight was placed on 5-cm mark and a 300-gm weight was placed somewhere on the meter stick. The meter stick was balanced.
Let's assume that the 300-gm weight is placed at x cm mark.
According to the principle of moments, the moment of the force clockwise about the fulcrum is equal to the moment of force anticlockwise about the fulcrum.
Now, the clockwise moment is given as:
M1 = 500g × 5cm
= 2500g cm
And, the anticlockwise moment is given as:
M2 = 300g × (x - 30) cm
= 300x - 9000 cm (Because the knife edge is placed on the 30-cm mark)
According to the principle of moments:
M1 = M2 ⇒ 2500g cm
= 300x - 9000 cm⇒ 2500
= 300x - 9000⇒ 300x
= 2500 + 9000⇒ 300x
= 11500⇒ x = 11500/300⇒ x
= 38.33 cm
Therefore, the student placed the 300-gram weight at 38.33 cm mark to balance the meter stick.
To know more about student visit;
brainly.com/question/28047438
#SPJ11
An object is recognized even if its orientation changes pertains to what aspect of object perception? OA. Figure and ground B. Whole and part
C. Shape and orientation
The recognition of an object even when its orientation changes pertains to the aspect of object perception known as shape and orientation.
Perception is a cognitive process in which we interpret sensory information in the environment. Perception enables us to make sense of our world by identifying, organizing, and interpreting sensory information.
Perception involves multiple processes that work together to create an understanding of the environment. The first process in perception is sensation, which refers to the detection of sensory stimuli by the sensory receptors.
The second process is called attention, which involves focusing on certain stimuli and ignoring others. The third process is organization, in which we group and organize sensory information into meaningful patterns. Finally, perception involves interpretation, in which we assign meaning to the patterns of sensory information that we have organized and grouped.
Shape and orientation is an important aspect of object perception. It enables us to recognize objects regardless of their orientation. For example, we can recognize a chair whether it is upright or upside down. The ability to recognize an object regardless of its orientation is known as shape constancy.
This ability is important for our survival, as it enables us to recognize objects in different contexts. Thus, the recognition of an object even if its orientation changes pertains to the aspect of object perception known as shape and orientation.
Learn more about cognitive process at: https://brainly.com/question/7272441
#SPJ11
You accidentally knocked over your coffee mug you precariously set at the edge of your table while video chatting with a friend, causing it to fall from rest to the ground. You tried to catch it but failed. You claimed to your friend that the mug only took 0.25 seconds to fall, thus making it impossible for you to catch. How tall would your table be if your claim were true? Ignore air drag or any rotation of your mug. Hint: You may assume final position to be zero.
If we assume the mug took 0.25 seconds to fall and ignore air drag and rotation, we can calculate the height of the table. By using the equation of motion for free fall, we can solve for the height given the time of fall.
The equation of motion for free fall without air drag is given by:
h = (1/2) * g * t^2,
where h is the height, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time.
Since the mug fell for 0.25 seconds, we can plug in this value into the equation and solve for h:
h = (1/2) * (9.8 m/s^2) * (0.25 s)^2.
Evaluating this expression will give us the height of the table if the mug fell for 0.25 seconds without any air drag or rotation.
To learn more about equation of motion click here : brainly.com/question/31314651
#SPJ11
A 5-kg object is moving in a x−y plane. At time t=0, the box crosses the origin travelling with the speed of 9 m/s in the +x direction. It is subjected to a conservative force, which hast the following potential energy function associated with it: U(x,y)=60y−4x 2
+125 (units have been omitted, you can assume putting x and y in meters gives U in joules) The forces acts on the box for exactly one second, at which time it has moved to a position given by the coordinates x=11.6 m and y=−6.0 m. 4.1: (5 points) Find the speed of the object at the end of the one-second interval. 4.2: (5 points) Find the acceleration of the object at the end of the one-second interval. Express your answer in terms of magnitude and direction.
4.1: The speed of the object at the end of the one-second interval is 12 m/s.
4.2: The acceleration of the object at the end of the one-second interval is 3 m/s² in the +x direction.
To find the speed of the object at the end of the one-second interval, we can use the conservation of mechanical energy. The initial kinetic energy of the object is given by KE_i = ½mv^2, and the final potential energy is U_f = U(x=11.6, y=-6.0). Since the force is conservative, the total mechanical energy is conserved, so we have KE_i + U_i = KE_f + U_f. Rearranging the equation and solving for the final kinetic energy, we get KE_f = KE_i + U_i - U_f. Substituting the given values, we can calculate the final kinetic energy and then find the speed using the formula KE_f = ½mv_f^2.
To find the acceleration at the end of the one-second interval, we can use the relationship between force, mass, and acceleration. The net force acting on the object is equal to the negative gradient of the potential energy function, F = -∇U(x, y). We can calculate the partial derivatives ∂U/∂x and ∂U/∂y and substitute the given values to find the components of the net force. Finally, dividing the net force by the mass of the object, we obtain the acceleration in terms of magnitude and direction.
To know more about acceleration click here:
https://brainly.com/question/12550364
#SPJ11
A particle with a velocity of 5.00x 10^3 m/s enters a region of
uniform magnetic fields. Calculate the magnitude and direction of
the electric field if the particle is to pass through the
undeflected.
The required magnitude and direction of the electric field to pass the particle undeflected is given by:|E| = 5.00 x 10³ x B (upwards)
A particle with a velocity of 5.00 x 10³ m/s enters a region of uniform magnetic fields. The magnitude and direction of the electric field if the particle is to pass through undeflected can be calculated through the following steps:
Step 1:Identify the given information
In the given problem, we are given:
Particle velocity, v = 5.00 x 10³ m/s
Magnetic field, B = given
Direction of magnetic field,
let’s assume it to be perpendicular to the plane of paper
Magnitude of electric field, E = to be calculated
Step 2:Find the magnetic force exerted on the particle
The magnetic force on the charged particle moving in a magnetic field is given by:
F = q(v x B) where,q is the charge on the particle
v is the velocity of the particle
B is the magnetic field acting on the particle
By the right-hand rule, it can be determined that the magnetic force, F acts perpendicular to the plane of the paper in this problem.
The direction of magnetic force can be found by the Fleming’s Left-hand rule. In this case, the particle is negatively charged as it is an electron. So the direction of force on the particle would be opposite to that of the direction of velocity of the particle in the magnetic field. Therefore, the magnetic force on the particle would be directed downwards as shown in the figure below.
Step 3: Find the electric field to counterbalance the magnetic force. In order to counterbalance the magnetic force on the electron, there must be an electric force acting on it as well. The electric force on the charged particle moving in an electric field is given by:
F = qE where, E is the electric field acting on the particle
By the right-hand rule, the direction of electric force on the particle can be found to be upwards in this case. Since the electron is undeflected, the magnetic force on it must be equal and opposite to the electric force on it. Hence,
q(v x B) = qE
Dividing by q, we get: v x B = E
Also, we know that the magnitude of the magnetic force on the particle is given by:
F = Bqv
where, v is the magnitude of velocity of the particle
Substituting the value of the magnetic force from this equation in the equation above, we get:
v x B = (Bqv)/qv = E
The magnitude of the electric field required to counterbalance the magnetic force is given by:
|E| = vB= 5.00 x 10³ x B
As we know the direction of the electric field is upwards, perpendicular to both the direction of the magnetic field and the velocity of the particle. Therefore, the required magnitude and direction of the electric field to pass the particle undeflected is given by:
|E| = 5.00 x 10³ x B (upwards)
The magnitude of the electric field required to counterbalance the magnetic force is given by |E| = 5.00 x 10³ x B (upwards).
Learn more about electric field https://brainly.com/question/19878202
#SPJ11
Given that D = 5 [ln(4 x + 3 t)]2 is a left-moving
solution to the wave equation (this is a square of the natural
logarithm), what is the propagation speed of this wave?
Assume everything is in SI uni
We cannot determine a single propagation speed for this wave.
To determine the propagation speed of the wave, we need to compare the given solution to the wave equation with the general form of a left-moving wave solution.
The general form of a left-moving wave solution is of the form:
D(x, t) = f(x - vt)
Here,
D(x, t) represents the wave function, f(x - vt) is the shape of the wave, x is the spatial variable, t is the time variable, and v is the propagation speed of the wave.
Comparing this general form to the given solution, we can see that the argument of the natural logarithm, 4x + 3t, is equivalent to (x - vt). Therefore, we can equate the corresponding terms:
4x + 3t = x - vt
To determine the propagation speed, we need to solve this equation for v.
Let's rearrange the terms:
4x + 3t = x - vt
4x - x = -vt - 3t
3x = -4t - vt
3x + vt = -4t
v(t) = -4t / (3x + v)
The propagation speed v depends on both time t and spatial variable x.
The equation shows that the propagation speed is not constant but varies with the values of t and x.
Therefore, we cannot determine a single propagation speed for this wave.
Learn more about propagation speed from this link:
https://brainly.com/question/31414919
#SPJ11
our employer asks you to build a 34-cm-long solenoid with an interior field of 4.0 mT. The specifications call for a single layer of wire, wound with the coils as close together as possible. You have two spools of wire available. Wire with a #18 gauge has a diameter of 1.02 mm and has a maximum current rating of 6 A. Wire with a # 26 gauge is 0.41 mm in diameter and can carry up to 1 A. Part A Which wire should you use? # 18 #26 Submit Request Answer Part B What current will you need? Express your answer to two significant figures and include the appropriate units. wand ?
Our employer asks you to build a 34-cm-long solenoid with an interior field of 4.0 mT, the current required for the solenoid is approximately 0.011 A.
Part A: In order to decide which wire to utilise, we must compute the number of turns per unit length for each wire and compare it to the specified parameters.
For #18 gauge wire:
Diameter (d1) = 1.02 mm
Radius (r1) = d1/2 = 1.02 mm / 2 = 0.51 mm = 0.051 cm
Number of turns per unit length (n1) = 1 / (2 * pi * r1)
For #26 gauge wire:
Diameter (d2) = 0.41 mm
Radius (r2) = d2/2 = 0.41 mm / 2 = 0.205 mm = 0.0205 cm
Number of turns per unit length (n2) = 1 / (2 * pi * r2)
Comparing n1 and n2, we find:
n1 = 1 / (2 * pi * 0.051) ≈ 3.16 turns/cm
n2 = 1 / (2 * pi * 0.0205) ≈ 7.68 turns/cm
Part B: To calculate the required current, we can utilise the magnetic field within a solenoid formula:
B = (mu_0 * n * I) / L
I = (B * L) / (mu_0 * n)
I = (0.004 T * 0.34 m) / (4[tex]\pi 10^{-7[/tex]T*m/A * 768 turns/m)
Calculating this expression, we find:
I ≈ 0.011 A
Therefore, the current required for the solenoid is approximately 0.011 A.
For more details regarding solenoid, visit:
https://brainly.com/question/21842920
#SPJ4
3. (4 points) A dog chewed a smoke detector into pieces and swallowed its Am-241 radioactive source. The source has an activity of 37 kBq primarily composed of alpha particles with an energy of 5.486 MeV per decay. A tissue mass of 0.25 kg of the dog's intestine completely absorbed the alpha particle energy as the source traveled through his digestive tract. The source was then "passed" in the dog's feces after 12 hours. Assume that the RBE for an alpha particle is 10. Calculate: a) the total Absorbed Energy expressed in the correct units b) the Absorbed Dose expressed in the correct units c) the Dose Equivalent expressed in the correct units d) the ratio of the dog's Dose Equivalent to the recommended annual human exposure
a) Total Absorbed Energy:
The absorbed energy is the product of the activity (in decays per second) and the energy per decay (in joules). We need to convert kilobecquerels to becquerels and megaelectronvolts to joules.
Total Absorbed Energy = Activity × Energy per decay
Total Absorbed Energy ≈ 3.04096 × 10^(-6) J
b) Absorbed Dose:
The absorbed dose is the absorbed energy divided by the mass of the tissue.
Absorbed Dose = Total Absorbed Energy / Tissue Mass
Absorbed Dose = 3.04096 × 10^(-6) J / 0.25 kg
Absorbed Dose = 12.16384 μGy (since 1 Gy = 1 J/kg, and 1 μGy = 10^(-6) Gy)
c) Dose Equivalent:
The dose equivalent takes into account the relative biological effectiveness (RBE) of the radiation. We multiply the absorbed dose by the RBE value for alpha particles.
Dose Equivalent = 121.6384 μSv (since 1 Sv = 1 Gy, and 1 μSv = 10^(-6) Sv)
Ratio = Dose Equivalent (Dog) / Recommended Annual Human Exposure
Ratio = 121.6384 μSv / 1 mSv
Ratio = 0.1216384
Therefore, the ratio of the dog's dose equivalent to the recommended annual human exposure is approximately 0.1216384.
Learn more about energy here : brainly.com/question/1932868
#SPJ11
A spaceship, 230-m long for those on board, moves by the Earth at 0.955c. What is its length as measured by an earthbound observer
The length of the spaceship as measured by an earthbound observer is approximately 68.69 meters.
To calculate the length of the spaceship as measured by an earthbound observer, we can use the Lorentz transformation for length contraction:
L' = L × sqrt(1 - (v²/c²))
Where:
L' is the length of the spaceship as measured by the earthbound observer,
L is the proper length of the spaceship (230 m in this case),
v is the velocity of the spaceship relative to the earthbound observer (0.955c),
c is the speed of light.
Substituting the given values:
L' = 230 m × sqrt(1 - (0.955c)²/c²)
To simplify the calculation, we can rewrite (0.955c)² as (0.955)² × c²:
L' = 230 m × sqrt(1 - (0.955)² × c²/c²)
L' = 230 m × sqrt(1 - 0.911025)
L' = 230 m sqrt(0.088975)
L' = 230 m × 0.29828
L' = 68.69 m
Learn more about speed -
brainly.com/question/13943409
#SPJ11
A womanstands on a scale in a moving elevator. Her mass is 56.0 kg, and the combined mass of the elevator and scale is an additional 825 kg. Starting from rest, the elevator accelerates upward. During the acceleration, the hoisting cable applies a force of 9850 N. What does the scale read (in N) during the acceleration?
The scale reading during the acceleration is 150
Given data: Mass of woman, m1 = 56.0 kg
Mass of elevator and scale, m2 = 825 kg
Net force, F = 9850 N, Acceleration, a =?
The equation of motion for the elevator and woman is given as F = (m1 + m2) a
The net force applied to the system is equal to the product of the total mass and the acceleration of the system.
The elevator and woman move upwards so we will take the acceleration as positive.
F = (m1 + m2) a9850 = (56.0 + 825) a9850 = 881a a = 9850/881a = 11.17 m/s²
Now, the scale reading is equal to the normal force acting on the woman.
The formula to calculate the normal force is N = m1 where g is the acceleration due to gravity.
N = (56.0 kg) (9.8 m/s²)N = 549.8 N
When the elevator starts accelerating upward, the woman feels heavier than her actual weight.
The normal force is greater than the weight of the woman.
Thus, the scale reading will be the sum of the normal force and the force due to the acceleration of the system.
Scale reading during acceleration = N + m1 a
Scale reading during acceleration = 549.8 + (56.0 kg) (11.17 m/s²)
Scale reading during acceleration = 1246.8 N
Therefore, the scale reading during the acceleration is 150
Learn more about scale reading from the given link,
https://brainly.com/question/30623159
#SPJ11
The propulsion system of DS-1 works by ejecting high-speed argon ions out thr rear of the engine. the engine slowly increases the velocity of DS-1 by about +9.31 m/s per day. (a) how many days will it take to increase the velocity of DS-1 by +3370 m/s? (b) what is the acceleration of DS-1?
NASA has developed Deep-Space 1 (DS-1), a spacecraft that is scheduled to rendezvous with the asteriod named 1992 KD (which orbits the sun millions of miles from earth). The propulsion system of DS-1 works by ejecting high-speed argon ions out the rear of the engine. The engine slowly increases the velocity of DS-1 by about + 9.31 m/s per day. (a) How many days will it take to increase the velocity of DS-1 by + 3370 m/s ? (b) What is the acceleration of DS-1?
to summarize (a) To calculate the number of days required to increase the velocity of DS-1 by +3370 m/s, we divide the desired change in velocity by the daily velocity increase. The result is approximately 362.32 days.
(b) The acceleration of DS-1 can be determined by dividing the daily velocity increase by the time it takes to achieve that increase. Therefore, the acceleration is approximately +9.31 m/s².
(a) The propulsion system of DS-1 increases its velocity by +9.31 m/s per day. To find the number of days required to increase the velocity by +3370 m/s, we divide the desired change in velocity by the daily velocity increase: 3370 m/s ÷ 9.31 m/s per day ≈ 362.32 days. Therefore, it would take approximately 362.32 days to achieve a velocity increase of +3370 m/s.
(b) The acceleration of DS-1 can be calculated by dividing the daily velocity increase by the time it takes to achieve that increase. From the given information, we know that the daily velocity increase is +9.31 m/s per day. Since acceleration is the rate of change of velocity with respect to time, we divide the daily velocity increase by one day: 9.31 m/s per day ÷ 1 day = +9.31 m/s². Therefore, the acceleration of DS-1 is approximately +9.31 m/s²
learn more about the propulsion system here:
https://brainly.com/question/32222856
#SPJ11
How much input force is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8?
An input force of 62.5 N is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8.
The mechanical advantage of a simple machine is defined as the ratio of the output force to the input force. Therefore, to find the input force required to extract an output force of 500 N from a simple machine with a mechanical advantage of 8, we can use the formula:
Mechanical Advantage (MA) = Output Force (OF) / Input Force (IF)
Rearranging the formula to solve for the input force, we get:
Input Force (IF) = Output Force (OF) / Mechanical Advantage (MA)
Substituting the given values, we have:
IF = 500 N / 8IF = 62.5 N
Therefore, an input force of 62.5 N is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8. This means that the machine amplifies the input force by a factor of 8 to produce the output force.
This concept of mechanical advantage is important in understanding how simple machines work and how they can be used to make work easier.
To know more about input force, visit:
https://brainly.com/question/28919004
#SPJ11
To extract an output force of 500 N from a simple machine that has a mechanical advantage of 8, the input force required is 62.5 N.
Mechanical advantage is defined as the ratio of output force to input force.
The formula for mechanical advantage is:
Mechanical Advantage (MA) = Output Force (OF) / Input Force (IF)
In order to determine the input force required, we can rearrange the formula as follows:
Input Force (IF) = Output Force (OF) / Mechanical Advantage (MA)
Now let's plug in the given values:
Output Force (OF) = 500 N
Mechanical Advantage (MA) = 8
Input Force (IF) = 500 N / 8IF = 62.5 N
Therefore, extract an output force of 500 N from a simple machine that has a mechanical advantage of 8, the input force required is 62.5 N.
To know more about force, visit:
https://brainly.com/question/30526425
#SPJ11
A sound wave is modeled as AP = 2.09 Pa sin(51.19 m 1 .3 – 17405 s ..t). What is the maximum change in pressure, the wavelength, the frequency, and the speed of the sound wave?
The maximum change in pressure is 2.09 Pa, the wavelength is approximately 0.123 m, the frequency is around 2770.4 Hz, and the speed of the sound wave is approximately 340.1 m/s.
To determine the maximum change in pressure, we can look at the amplitude of the wave. In the given model, the amplitude (A) is 2.09 Pa, so the maximum change in pressure is 2.09 Pa.
Next, let's find the wavelength of the sound wave. The wavelength (λ) is related to the wave number (k) by the equation λ = 2π/k. In this case, the wave number is given as 51.19 m^(-1), so we can calculate the wavelength using [tex]\lambda = 2\pi /51.19 m^{-1} \approx 0.123 m[/tex].
The frequency (f) of the sound wave can be determined using the equation f = ω/2π, where ω is the angular frequency. From the given model, we have ω = 17405 s⁻¹, so the frequency is
[tex]f \approx 17405/2\pi \approx 2770.4 Hz[/tex].
Finally, the speed of the sound wave (v) can be calculated using the equation v = λf. Plugging in the values we get,
[tex]v \approx 0.123 m \times 2770.4 Hz \approx 340.1 m/s[/tex].
Learn more about wavelength here:
https://brainly.com/question/30532991
#SPJ11
A series RLC Circuit has resonance angular frequency 2.00x10³ rad/s. When it is operating at some input frequency, XL=12.0Ω and XC=8.00Ω . (c). If it is possible, find L and C. If it is not possible, give a compact expression for the condition that L and C must satisfy..
For the given conditions, the values of L and C are L = 6.00 mH and C = 6.25 μF (microfarads), respectively.
To find the values of L (inductance) and C (capacitance) for the given series RLC circuit, we can use the resonance angular frequency (ω) and the values of XL (inductive reactance) and XC (capacitive reactance). The condition for resonance in a series RLC circuit is given by:
[tex]X_L = X_C[/tex]
Using the formula for inductive reactance [tex]X_L[/tex] = ωL and capacitive reactance [tex]X_C[/tex] = 1/(ωC), we can substitute these values into the resonance condition:
ωL = 1/(ωC)
Rearranging the equation, we have:
L = 1/(ω²C)
Now we can substitute the given values:
[tex]X_L[/tex] = 12.0 Ω
[tex]X_C[/tex] = 8.00 Ω
Since [tex]X_L[/tex] = ωL and [tex]X_C[/tex] = 1/(ωC), we can write:
ωL = 12.0 Ω
1/(ωC) = 8.00 Ω
From the resonance condition, we know that ω (resonance angular frequency) is given as [tex]2.00 * 10^3[/tex] rad/s.
Substituting ω = [tex]2.00 * 10^3[/tex] rad/s into the equations, we get:
[tex](2.00 * 10^3) L = 12.0[/tex]
[tex]1/[(2.00 * 10^3) C] = 8.00[/tex]
Solving these equations will give us the values of L and C:
L = 12.0 / [tex](2.00 * 10^3)[/tex] Ω = [tex]6.00 * 10^{-3[/tex] Ω = 6.00 mH (millihenries)
C = 1 / [[tex](2.00 * 10^3)[/tex] × 8.00] Ω = [tex]6.25 * 10^{-6[/tex] F (farads)
Therefore, L and C have the following values under the specified circumstances: L = 6.00 mH and C = 6.25 F (microfarads), respectively.
Learn more about angular frequency on:
https://brainly.com/question/30897061
#SPJ4
The resonance angular frequency of a series RLC circuit is given as 2.00x10³ rad/s. At this frequency, the reactance of the inductor (XL) is 12.0Ω and the reactance of the capacitor (XC) is 8.00Ω.
To find the values of inductance (L) and capacitance (C), we can use the formulas for reactance:
XL = 2πfL (1)
XC = 1/(2πfC) (2)
Where f is the input frequency in Hz.
By substituting the given values, we have:
12.0Ω = 2π(2.00x10³)L (3)
8.00Ω = 1/(2π(2.00x10³)C) (4)
Now, let's solve equations (3) and (4) for L and C.
From equation (3):
L = 12.0Ω / (2π(2.00x10³)) (5)
From equation (4):
C = 1 / (8.00Ω * 2π(2.00x10³)) (6)
Using these equations, we can calculate the values of L and C. It is possible to find L and C using these equations. The inductance (L) is equal to 9.54x10⁻⁶ H (Henry), and the capacitance (C) is equal to 1.97x10⁻⁵ F (Farad).
An RLC series circuit has a 3 Q resistor, a 354 mH inductor, and a 17.7 uF capacitor. If this is connected to a 178 Volt power supply, what will the rms current be at 362 Hz? Express your answer in mA
The rms current in the RLC series circuit at a frequency of 362 Hz will be approximately 0.358 A. To calculate the rms current in an RLC series circuit, then, we can divide the voltage (V) by the impedance (Z) to obtain the rms current (I).
The impedance of an RLC series circuit is given by the formula:
Z = √(R^2 + (XL - XC)^2)
Where:
R = Resistance = 3 Ω
XL = Inductive Reactance = 2πfL
XC = Capacitive Reactance = 1/(2πfC)
f = Frequency = 362 Hz
L = Inductance = 354 mH = 354 × 10^(-3) H
C = Capacitance = 17.7 μF = 17.7 × 10^(-6) F
Let's calculate the values:
XL = 2πfL = 2π(362)(354 × 10^(-3)) ≈ 1.421 Ω
XC = 1/(2πfC) = 1/(2π(362)(17.7 × 10^(-6))) ≈ 498.52 Ω
Now we can calculate the impedance:
Z = √(R^2 + (XL - XC)^2)
= √(3^2 + (1.421 - 498.52)^2)
≈ √(9 + 247507.408)
≈ √247516.408
≈ 497.51 Ω
Finally, we can calculate the rms current:
I = V / Z
= 178 / 497.51
≈ 0.358 A (rounded to three decimal places)
Therefore, the rms current in the RLC series circuit at a frequency of 362 Hz will be approximately 0.358 A.
Learn more about frequency here:
brainly.com/question/29739263
#SPJ11
What phenomenon in hearing is analogous to spatial frequency channels in vision?
A. critical bands
B. tonal suppression
C. auditory adaptation
D. the volley principle
The phenomenon in hearing that is analogous to spatial frequency channels in vision is critical bands. Hence, the correct option is A: Critical bands.
Critical bands are regions of the audible frequency range in which a complex sound is divided into individual, discrete frequency bands by the human auditory system.
For instance, when different frequencies in a complex sound, such as a musical instrument or a human voice, are picked up by the ear, they are sent to the brain via various channels that respond to specific frequencies.
These channels are referred to as critical bands. The frequency range of these bands varies depending on the loudness of the sound.
To learn more about hearing, refer below:
https://brainly.com/question/28101932
#SPJ11
6. A golf cart of 330Kg of mass moves horizontally and without
friction at 5m/s when
a 70Kg person originally at rest gets on the golf cart. What will
be the final speed
of the cart with the person?
The final speed of the golf cart with the person will be 4.26 m/s
Mass of golf cart = 330 kgMass of person = 70 kgTotal mass of the system, m = 330 + 70 = 400 kgInitial velocity of the golf cart, u = 5 m/sFinal velocity of the golf cart with the person, v = ?,
As per the law of conservation of momentum: Initial momentum of the system, p1 = m × u = 400 × 5 = 2000 kg m/sNow, the person gets on the golf cart. Hence, the system now becomes of 400 + 70 = 470 kg of mass.Let the final velocity of the system be v'.Then, the final momentum of the system will be: p2 = m × v' = 470 × v' kg m/sNow, as per the law of conservation of momentum:p1 = p2⇒ 2000 = 470 × v'⇒ v' = 2000/470 m/s⇒ v' = 4.26 m/s.
Therefore, the final velocity of the golf cart with the person will be 4.26 m/s. (rounded off to 2 decimal places).Hence, the final speed of the golf cart with the person will be 4.26 m/s (approximately).
Learn more on momentum here:
brainly.com/question/24030570
#SPJ11
A shopper standing 2.20 m from a convex security mirror sees his image with a magnification of 0.280. A shopper standing 2.20 m from a convex security mirror sees his image with a magnification of 0.280. (a) Where is his image (in m)? (Use the correct sign.) m behind the mirror (b) What is the focal length (in m) of the mirror? m (c) What is its radius of curvature in m)? m
The problem involves determining the position of an image formed by a convex security mirror, as well as the focal length and radius of curvature of the mirror.
(a) For a convex mirror, the magnification (m) is negative and given by the equation m = -di/do, where di is the image distance and do is the object distance. In this case, the magnification is 0.280 and the object distance is 2.20 m. Solving for di, we have:
0.280 = -di/2.20
Rearranging the equation, we find that di = -0.280 * 2.20 = -0.616 m. Since the image distance is negative, the image is formed behind the mirror, specifically, 0.616 m behind the mirror.
(b) The focal length (f) of a convex mirror can be determined using the formula 1/f = 1/do + 1/di. From part (a), we know that di = -0.616 m. Substituting this value and the object distance (do = 2.20 m) into the equation, we can solve for f:
1/f = 1/2.20 + 1/(-0.616)
Simplifying the equation, we find that 1/f = -0.4545 - 1.6234. Combining the terms on the right side gives 1/f = -2.0779. Taking the reciprocal of both sides, we get f = -0.481 m. Therefore, the focal length of the convex mirror is -0.481 m.
(c) The radius of curvature (R) of a convex mirror is twice the focal length, so R = 2 * (-0.481) = -0.962 m. The negative sign indicates that the radius of curvature is concave with respect to the observer.
Learn more about mirror:
https://brainly.com/question/3795433
#SPJ11