As you drive down the road at 13 m/s , you press on the gas pedal and speed up with a uniform acceleration of 1.02 m/s2 for 0.70 s. If the tires on your car have a radius of 33 cm, what is their angular displacement during this period of acceleration?

Answer:

a)  v_correcaminos = 22.95 m / s ,  b)  x = 512.4 m ,

c) v = (45.83 i ^ -109.56 j ^) m / s

Explanation:

We can solve this exercise using the kinematics equations

a) Let's find the time or the coyote takes to reach the cliff, let's start by finding the speed on the cliff

         v² = v₀² + 2 a x

they tell us that the coyote starts from rest v₀ = 0 and its acceleration is a=15 m / s²

         v = √ (2 15 70)

         v = 45.83 m / s

with this value calculate the time it takes to arrive

        v = v₀ + a t

        t = v / a

        t = 45.83 / 15

        t = 3.05 s

having the distance to the cliff and the time, we can find the constant speed of the roadrunner

         v_ roadrunner = x / t

         v_correcaminos = 70 / 3,05

         v_correcaminos = 22.95 m / s

b) if the coyote leaves the cliff with the horizontal velocity v₀ₓ = 45.83 m / s, they ask how far it reaches.

Let's start by looking for the time to reach the cliff floor

            y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²

in this case y = 0 and the height of the cliff is y₀ = 100 m

          0 = 100 + 45.83 t - ½ 9.8 t²

          t² - 9,353 t - 20,408 = 0

we solve the quadratic equation

         t = [9,353 ±√ (9,353² + 4 20,408)] / 2

         t = [9,353 ± 13] / 2

         t₁ = 11.18 s

        t₂ = -1.8 s

Since time must be a positive quantity, the answer is t = 11.18 s

we calculate the horizontal distance traveled

        x = v₀ₓ t

        x = 45.83 11.18

        x = 512.4 m

c) speed when it hits the ground

         vₓ = v₀ₓ = 45.83 m / s

we look for vertical speed

         v_{y} = [tex]v_{oy}[/tex] - gt

         v_{y} = 0 - 9.8 11.18

         v_{y} = - 109.56 m / s

         v = (45.83 i ^ -109.56 j ^) m / s

Answer:

The new angular speed is [tex]w = 6 \ rev/s[/tex]

Explanation:

From the  question we are told that

      The angular velocity of the spin is  [tex]w_o = 3 \ rev/s[/tex]

       The  original moment of inertia is  [tex]I_o[/tex]

        The new moment of inertia is  [tex]I =\frac{I_o}{2}[/tex]    

Generally angular momentum is mathematically represented as

      [tex]L = I * w[/tex]

Now according to the law of conservation of momentum, the initial momentum is equal to the final momentum hence the angular momentum is constant so

         [tex]I * w = constant[/tex]

=>       [tex]I_o * w _o = I * w[/tex]

where w is the new angular speed  

  So  

          [tex]I_o * 3 = \frac{I_o}{2} * w[/tex]

=>        [tex]w = \frac{3 * I_o}{\frac{I_o}{2} }[/tex]

=>         [tex]w = 6 \ rev/s[/tex]

Question:

A 10 gauge copper wire carries a current of 15 A. Assuming one free electron per copper atom, calculate the drift velocity of the electrons. (The cross-sectional area of a 10-gauge wire is 5.261 mm².)

Answer:

3.22 x 10⁻⁴ m/s

Explanation:

The drift velocity (v) of the electrons in a wire (copper wire in this case) carrying current (I) is given by;

v = [tex]\frac{I}{nqA}[/tex]

Where;

n = number of free electrons per cubic meter

q =  electron charge

A =  cross-sectional area of the wire

First let's calculate the number of free electrons per cubic meter (n)

Known constants:

density of copper, ρ = 8.95 x 10³kg/m³

molar mass of copper, M = 63.5 x 10⁻³kg/mol

Avogadro's number, Nₐ = 6.02 x 10²³ particles/mol

But;

The number of copper atoms, N, per cubic meter is given by;

N = (Nₐ x ρ / M)          -------------(ii)

Substitute the values of Nₐ, ρ and M into equation (ii) as follows;

N = (6.02 x 10²³ x 8.95 x 10³) / 63.5 x 10⁻³

N = 8.49 x 10²⁸ atom/m³

Since there is one free electron per copper atom, the number of free electrons per cubic meter is simply;

n = 8.49 x 10²⁸ electrons/m³

Now let's calculate the drift electron

Known values from question:

A = 5.261 mm² = 5.261 x 10⁻⁶m²

I = 23A

q = 1.6 x 10⁻¹⁹C

Substitute these values into equation (i) as follows;

v = [tex]\frac{I}{nqA}[/tex]

v = [tex]\frac{23}{8.49*10^{28} * 1.6 *10^{-19} * 5.261*10^{-6}}[/tex]

v = 3.22 x 10⁻⁴ m/s

Therefore, the drift electron is 3.22 x 10⁻⁴ m/s

Answer:

(a)    f = 0.58Hz

(b)    vmax = 0.364m/s

(c)    amax = 1.32m/s^2

(d)    E = 0.1J

(e)    [tex]x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]

Explanation:

(a) The frequency of the oscillation, in a spring-mass system, is calulated by using the following formula:

[tex]f=\frac{1}{2\pi}\sqrt{\frac{k}{m}}[/tex]          (1)

k: spring constant = 20.0N/m

m: mass = 1.5kg

you replace the values of m and k for getting f:

[tex]f=\frac{1}{2\pi}\sqrt{\frac{20.0N/m}{1.5kg}}=0.58s^{-1}=0.58Hz[/tex]

The frequency of the oscillation is 0.58Hz

(b) The maximum speed is given by:

[tex]v_{max}=\omega A=2\pi f A[/tex]     (2)

A: amplitude of the oscillations = 10.0cm = 0.10m

[tex]v_{max}=2\pi (0.58s^{-1})(0.10m)=0.364\frac{m}{s}[/tex]

The maximum speed of the mass is 0.364 m/s.

The maximum speed occurs when the mass passes trough the equilibrium point of the oscillation.

(c) The maximum acceleration is given by:

[tex]a_{max}=\omega^2A=(2\pi f)^2 A[/tex]

[tex]a_{max}=(2\pi (0.58s^{-1}))(0.10m)=1.32\frac{m}{s^2}[/tex]

The maximum acceleration is 1.32 m/s^2

The maximum acceleration occurs where the elastic force is a maximum, that is, where the mass is at the maximum distance from the equilibrium point, that is, the acceleration.

(d) The total energy of the system is:

[tex]E=\frac{1}{2}kA^2=\frac{1}{2}(20.0N/m)(0.10m)^2=0.1J[/tex]

The total energy is 0.1J

(e) The displacement as a function of time is:

[tex]x(t)=Acos(\omega t)=Acos(2\pi ft)\\\\x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]

Answer:

c.they have opposite charges.

Explanation:

because the protons have a positive charge and the neutrons have no charge.

Answer:

The rate at which energy is dissipated in the resistor is equal to the rate at which energy is stored in the inductor's magnetic field in 24.95 ms.

Explanation:

The energy stored in the inductor is given as

E₁ = ½LI²

The rate at which energy is stored in the inductor is

(dE₁/dt) = (d/dt) (½LI²)

Since L is a constant

(dE₁/dt) = ½L × 2I (dI/dt) = LI (dI/dt)

(dE₁/dt) = LI (dI/dt)

Rate of Energy dissipated in a resistor = Power = I²R

(dE₂/dt) = I²R

When the rate at which energy is dissipated in the resistor equal to the rate at which energy is stored in the inductor's magnetic field

(dE₁/dt) = (dE₂/dt)

OK (dI/dt) = I²R

L (dI/dt) = IR

Current in a this kind of series setup of inductor and resistor at any time, t, is given as

I = (V/R) (1 - e⁻ᵏᵗ)

k = (1/time constant) = (R/L)

(dI/dt) = (kV/R) e⁻ᵏᵗ = (RV/RL) e⁻ᵏᵗ = (V/L) e⁻ᵏᵗ

L (dI/dt) = IR

L [(V/L) e⁻ᵏᵗ] = R [(V/R) (1 - e⁻ᵏᵗ)

V e⁻ᵏᵗ = V (1 - e⁻ᵏᵗ)

e⁻ᵏᵗ = 1 - e⁻ᵏᵗ

2 e⁻ᵏᵗ = 1

e⁻ᵏᵗ = (1/2) = 0.5

e⁻ᵏᵗ = 0.5

In e⁻ᵏᵗ = In 0.5 = -0.69315

- kt = -0.69315

kt = 0.69315

k = (1/time constant)

Time constant = 36.0 ms = 0.036 s

k = (1/0.036) = 27.78

27.78t = 0.69315

t = (0.69315/27.78) = 0.02495 = 24.95 ms

Hope this Helps!!!

Answer:

 θ₁ = 0.04º , θ₂ = 0.00118º

Explanation:

The equation that describes the diffraction pattern of a network is

             d sin θ = m λ

where the diffraction order is, in this case they indicate that the order

m = 1

           θ = sin⁻¹ (λ / d)

Trfuvsmod ls inrsd fr ll red s SI units

           d = 12000 line / inc (1 inc / 2.54cm) = 4724 line / cm

the distance between two lines we can look for it with a direct proportions rule

If there are 4724 lines in a centimeter, the distance for two hundred is

            d = 2 lines (1 cm / 4724 line) = 4.2337 10⁻⁴ cm

let's calculate the angles

λ = 300 10-9 m

            θ₁ = sin⁻¹ (300 10-9 / 4,2337 10-4)

            θ₁ = sin⁻¹ (7.08 10-4)

            θ₁ = 0.04º

λ = 5000

          θ₂ = sin-1 (500 10-9 / 4,2337 10-4)

          θ₂ = 0.00118º

Answer:

The rubber band will be stretched 0.02 m.

The work done in stretching is 0.11 J.

Explanation:

Force 1 = 44 N

extension of rubber band = 0.080 m

Force 2 = 11 N

extension = ?

According to Hooke's Law, force applied is proportional to the extension provided elastic limit is not extended.

F = ke

where k = constant of elasticity

e = extension of the material

F = force applied.

For the first case,

44 = 0.080K

K = 44/0.080 = 550 N/m

For the second situation involving the same rubber band

Force = 11 N

e = 550 N/m

11 = 550e

extension e = 11/550 = 0.02 m

The work done to stretch the rubber band this far is equal to the potential energy stored within the rubber due to the stretch. This is in line with energy conservation.

potential energy stored = [tex]\frac{1}{2}ke^{2}[/tex]

==> [tex]\frac{1}{2}* 550* 0.02^{2}[/tex] = 0.11 J

Answer:

The two masses are 3.39 Kg and 1.75 Kg

Explanation:

The gravitational force of attraction between two bodies is given by the formula;

F = Gm₁m₂/d²

where G is the gravitational force constant = 6.67 * 10⁻¹¹ Nm²Kg⁻²

m₁ = mass of first object; m₂ = mass of second object; d = distance of separation between the objects

Further calculations are provided in the attachment below

Answer:

Explanation:

Given data

length of cube= 0.2015 m

density = 19300 kg/m^3.

But the volume of cube is given as [tex]l*l*l= l^3[/tex]

[tex]volume -of- cube= 0.2015*0.2015*0.2015= 0.00818 m^3[/tex]

The density is expressed as = mass/volume

[tex]mass=19300*0.00818= 157.87m^3[/tex]

Answer:

Acceleration of the asteroid relative to the spacecraft = 2ε[tex]E^{2}[/tex]A/m

Explanation:

The maximum electric field in the beam = 2E

cross-sectional area of beam = A

The intensity of an electromagnetic wave with electric field is

I = cε[tex]E_{0} ^{2}[/tex]/2

for [tex]E_{0}[/tex] = 2E

I = 2cε[tex]E^{2}[/tex]    ....equ 1

where

I is the intensity

c is the speed of light

ε is the permeability of free space

[tex]E_{0}[/tex]  is electric field

Radiation pressure of an electromagnetic wave on an absorbing surface is given as

P = I/c

substituting for I from above equ 1. we have

P = 2cε[tex]E^{2}[/tex]/c = 2ε[tex]E^{2}[/tex]    ....equ 2

Also, pressure P = F/A

therefore,

F = PA    ....equ 3

where

F is the force

P is pressure

A is cross-sectional area

substitute equ 2 into equ 3, we have

F = 2ε[tex]E^{2}[/tex]A

force on a body = mass x acceleration.

that is

F = ma

therefore,

a = F/m

acceleration of the asteroid will then be

a = 2ε[tex]E^{2}[/tex]A/m

where m is the mass of the asteroid.

Answer:

2.45 m/s

Explanation:

kinetic energy = 1/2 * m * v^2

then, 0.5 * 2500 * x^2 = 0.5 * 67 * 15^2

by solving for x, X = 2.45 m/s

Answer:

 θ  = 180

Explanation:

When an electric dipole is placed in an electric field, there is a torque due to the electric force

           τ = p x E

by rotating the dipole there is a change in potential energy

        ΔU = ∫ τ dθ

        ΔU = p E (cos θ₂ - cos θ₁)

when the dipole starts from an angle to the equilibrium position for θ = 0

          ΔU = pE (cos θ  - cos 0)

           cos θ  = 1 + DU / pE)

let's apply this expression to our case, the change in potential energy is ΔU = -0.2J

let's calculate

          cos θ  = 1 -0.2 / 0.1

          cos θ  = -1

           θ  = 180

Answer:

335.79cm/s

Explanation:

When a transverse wave of wavelength λ is produced during the vibration of a wire, the frequency(f), and the speed(v) of the wave pulses are related to the wavelength as follows;

v = fλ        ------------------(ii)

From the question;

f = 6.3Hz

λ = 53.3cm

Substitute these values into equation (i) as follows;

v = 6.3 x 53.3

v = 335.79cm/s

Therefore, the speed of the wave pulses along the wire is 335.79cm/s

Answer:

[tex]v_{2}=3.5 m/s[/tex]

Explanation:

Using the conservation of energy we have:

[tex]\frac{1}{2}mv^{2}=mgh[/tex]

Let's solve it for v:

[tex]v=\sqrt{2gh}[/tex]

So the speed at the lowest point is [tex]v=7 m/s[/tex]

Now, using the conservation of momentum we have:

[tex]m_{1}v_{1}=m_{2}v_{2}[/tex]

[tex]v_{2}=\frac{1*7}{2}[/tex]

Therefore the speed of the block after the collision is [tex]v_{2}=3.5 m/s[/tex]

I hope it helps you!

Answer:

a) Energy stored in the capacitor, [tex]E = 1.0125 *10^{-3} J[/tex]

b) Q = 45 µC

c) C' = 1.5 μF

d)  [tex]E = 6.75 *10^{-4} J[/tex]

Explanation:

Capacitance, C = 1 µF

Charge on the plates, Q = 45 µC

a) Energy stored in the capacitor is given by the formula:

[tex]E = \frac{Q^2}{2C} \\\\E = \frac{(45 * 10^{-6})^2}{2* 1* 10^{-6}}\\\\E = \frac{2025 * 10^{-6}}{2}\\\\E = 1012.5 *10^{-6}\\\\E = 1.0125 *10^{-3} J[/tex]

b) The charge on the plates of the capacitor will  not change

It will still remains, Q = 45 µC

c)  Electric field is non zero over (1-1/3) = 2/3 of d

From the relation V = Ed,

The voltage has changed by a factor of 2/3

Since the capacitance is given as C = Q/V  

The new capacitance with the conductor in place, C' = (3/2) C

C' = (3/2) * 1μF

C' = 1.5 μF

d) Energy stored in the capacitor with the conductor in place

[tex]E = \frac{Q^2}{2C} \\\\E = \frac{(45 * 10^{-6})^2}{2* 1.5* 10^{-6}}\\\\E = \frac{2025 * 10^{-6}}{3}\\\\E = 675 *10^{-6}\\\\E = 6.75 *10^{-4} J[/tex]

Answer:

x=22.57 m

Explanation:

Given that

35 m in W of S

angle = 40 degrees

25 m in east

From the diagram

The angle

[tex]\theta=90-40=50^o[/tex]

From the triangle OAB

[tex]cos40^o=\frac{35^2+25^2-x^2}{2\times 35\times 25}[/tex]

[tex]1340.57=35^2+25^2-x^2[/tex]

x=22.57 m

Therefore the answer of the above problem will be 22.57 m

Answer:

the correct answer is d Beats

Explanation:

when two sound waves interfere time has different frequencies, the result is the sum of the waves is

       y = 2A cos 2π (f₁-f₂)/2    cos 2π (f₁ + f₂)/2

where in this expression the first part represents the envelope and the second part represents the pulse or beatings of the wave.

When examining the correct answer is d Beats

Complete question:

A solid conducting sphere is placed in an external uniform electric field. With regard to the electric field on the sphere's interior, which statement is correct?

A. the interior field points in a direction parallel to the exterior field

B. There is no electric field on the interior of the conducting sphere.

C. The interior field points in a direction perpendicular to the exterior field.

D. the interior field points in a direction opposite to the exterior field.

Answer:

B. There is no electric field on the interior of the conducting sphere.

Explanation:

Conductors are said to have free charges that move around easily. When the conductor is now placed in a static electric field, the free charges react to attain electrostatic equilibrium (steady state).

Here, a solid conducting sphere is placed in an external uniform electric field. Until the lines of the electric field are perpendicular to the surface, the free charges will move around the spherical conductor, causing polarization. There would be no electric field in the interior of the spherical conductor because there would be movement of  free charges in the spherical conductor in response to any field until its neutralization.

Option B is correct.

There is no electric field on the interior of the conducting sphere.

Answer:

The gray spheres is negatively charged while the red is positively charged

Explanation:

This is because theelectrophorus becomes less positive once it pulls some electrons away from the red sphere, but, the electrophorus is replaced on the slab and recharged by grounding it before it proceeds to charge the grey sphere, thereby giving it electrons and making it negatively charged

Answer:

The gray sphere has a positive charge and the red sphere has a positive charge.

Answer:

Velocity.

Explanation:

Projectile motion is characterized as the motion that an object undergoes when it is thrown into the air and it is only exposed to acceleration due to gravity.

As per the question, 'any change in the initial velocity of the projectile(object having gravity as the only force) would lead to a change in the range as well as the maximum height of the projectile.' To illustrate numerically:

Horizontal range: As per expression:

R= ([tex]u^{2}[/tex]*sin2θ)/g

the range depending on the square of the initial velocity.

Maximum height: As per expression:

H= ([tex]u^{2}[/tex] * [tex]sin^{2}[/tex]θ )/2g

the maximum distance also depends upon square of the initial velocity.

​

​

​

Answer:

The angular momentum of the crate is [tex]M_{C} V_{1} d[/tex]

Explanation:

mass of the crate = [tex]M_{C}[/tex]

speed of forklift = [tex]V_{1}[/tex]

The distance between the center of the mass and the point A = d

Recall that the angular moment is the moment of the momentum.

[tex]L = P*d[/tex]    ..... equ 1

where L is the angular momentum,

P is the momentum of the system,

d is the perpendicular distance between the crate and the point on the axis about which the momentum acts. It is equal to d from the image

Also, we know that the momentum P is the product of mass and velocity

P = mv      ....equ 2

in this case, the mass = [tex]M_{C}[/tex]

the velocity = [tex]V_{1}[/tex]

therefore, the momentum P = [tex]M_{C}[/tex][tex]V_{1}[/tex]

we substitute equation 2 into equation 1 to give

[tex]L = M_{C} V_{1} d[/tex]

Complete Question:

A 0.50-kg ball that is tied to the end of a 1.5-m light cord is revolved in a horizontal plane, with the cord making a 30° angle with the vertical.

(a) Determine the ball’s speed. (b) If, instead, the ball is revolved so that its

speed is 3.7 m/s, what angle does the cord make with the vertical?

(Check attached image for the diagram.)

Answer:

(a) The ball’s speed, v = 2.06 m/s

(b) The angle the cord makes with the vertical is 50.40⁰

Explanation:

If the ball is revolved in a horizontal plane, it will form a circular trajectory,

the radius of the circle, R = Lsinθ

where;

L is length of the string

The force acting on the ball is given as;

F = mgtanθ

This above is also equal to centripetal force;

[tex]mgTan \theta = \frac{mv^2}{R} \\\\Recall, R = Lsin \theta\\\\mgTan \theta = \frac{mv^2}{Lsin \theta}\\\\v^2 = glTan \theta sin \theta\\\\v = \sqrt{glTan \theta sin \theta} \\\\v = \sqrt{(9.8)(1.5)(Tan30)(sin30)} \\\\v = 2.06 \ m/s[/tex]

(b) when the speed is 3.7 m/s

[tex]v = \sqrt{glTan \theta sin \theta} \ \ \ ;square \ both \ sides\\\\v^2 = glTan \theta sin \theta\\\\v^2 = gl(\frac{sin \theta}{cos \theta}) sin \theta\\\\v^2 = \frac{gl*sin^2 \theta}{cos \theta} \\\\v^2 = \frac{gl*(1- cos^2 \theta)}{cos \theta}\\\\gl*(1- cos^2 \theta) = v^2cos \theta\\\\(9.8*1.5)(1- cos^2 \theta) = (3.7^2)cos \theta\\\\14.7 - 14.7cos^2 \theta = 13.69cos \theta\\\\14.7cos^2 \theta + 13.69cos \theta - 14.7 = 0 \ \ \ ; this \ is \ quadratic \ equation\\\\[/tex]

[tex]Cos\theta = \frac{13.69\sqrt{13.69^2 -(-4*14.7*14.7)} }{14.7} \\\\Cos \theta = 0.6374\\\\\theta = Cos^{-1}(0.6374)\\\\\theta = 50.40 ^o[/tex]

Therefore, the angle the cord makes with the vertical is 50.40⁰

Answer: after 1.75 seconds

Explanation:

The only force acting on the ball is the gravitational force, so the acceleration will be:

a = -9.8 m/s^2

the velocity can be obtained by integrating over time:

v = -9.8m/s^2*t + v0

where v0 is the initial velocity; v0 = -7.95 m/s.

v = -9.8m/s^2*t - 7.95 m/s.

For the position we integrate again:

p = -4.9m/s^2*t^2 - 7.95 m/s*t + p0

where p0 is the initial position: p0 = 29m

p =  -4.9m/s^2*t^2 - 7.95 m/s*t + 29m

Now we want to find the time such that the position is equal to zero:

0 = -4.9m/s^2*t^2 - 7.95 m/s*t + 29m

Then we solve the Bhaskara's equation:

[tex]t = \frac{7.95 +- \sqrt{7.95^2 +4*4.9*29} }{-2*4.9} = \frac{7.95 +- 25.1}{9.8}[/tex]

Then the solutions are:

t = (7.95 + 25.1)/(-9.8) = -3.37s

t = (7.95 - 25.1)/(-9.8) = 1.75s

We need the positive time, then the correct answer is 1.75s

Answer:

Muons reach the earth in great amount due to the relativistic time dilation from an earthly frame of reference.

Explanation:

Muons travel at exceedingly high speed; close to the speed of light. At this speed, relativistic effect starts to take effect. The effect of this is that, when viewed from an earthly reference frame, their short half life of about two-millionth of a second is dilated. The dilated time, due to relativistic effects on time for travelling at speed close to the speed of light, gives the muons an extended relative travel time before their complete decay. So in reality, the muon do not have enough half-life to survive the distance from their point of production high up in the atmosphere to sea level, but relativistic effect due to their near-light speed, dilates their half-life; enough for them to be found in sufficient amount at sea level.  

Answer:

Coulomb's law is:

[tex]F = \frac{1}{4*pi*e0} *(q1*q2)/r^2[/tex]

First, force has units of Newtons, the charges have units of Coulombs, and r, the distance, has units of meters, then, working only with the units we have:

N = (1/{e0})*C^2/m^2

then we have:

{e0} = C^2/(m^2*N)

And we know that N = kg*m/s^2

then the dimensions of e0 are:

{e0} = C^2*s^2/(m^3)

(current square per time square over cubed distance)

And knowing that a Faraday is:

F = C^2*S^2/m^2

The units of e0 are:

{e0} = F/m.

Answer and Explanation:

There is no probability of obtaining such a circuit of closed track current carrying wire whose field of magnitude displays i.e.  [tex]B \alpha \frac{1}{r^2}[/tex]

The magnetic field is a volume of vectors

And [tex]\phi\ bds = 0[/tex]. This ensures isolated magnetic poles or magnetic charges would not exit

Therefore for a closed path,  we never received magnetic field that followed the [tex]B \alpha \frac{1}{r^2}[/tex] it is only for the simple current-carrying wire for both finite or infinite length.

Answer:

[tex]\large \boxed{\text{3.3 cm}^{3}}[/tex]

Explanation:

Assume the stone consists of basalt, which has a density of 3.0 g/cm³.

[tex]\rho = \text{10 g}\times\dfrac{\text{1 cm}^{3}}{\text{3.0 g}} = \text{3.3 cm}^{3}\\\\\text{The volume of the stone is $\large \boxed{\textbf{3.3 cm}^{3}}$}[/tex]

Answer:

a) yes

b) no

c) yes

d)Cart 2 with mass [tex]\frac{M}{3}[/tex]   is expected to be more faster

e) u₂ = 48 m/s

Explanation:

a) the all out linear momentum of an arrangement of particles of Cart 1 not followed up on by external forces is constant.

b) the linear momentum of Cart 2 will be acted upon by external force by Cart 1 with mass M, thereby it's variable and the momentum is not conserved

c) yes, the momentum is conserved because no external force acted upon it and both Carts share the same velocity after the reaction

note: m₁u₁ + m₂u₂ = (m₁ + m₂)v

d) Cart 2 with mass [tex]\frac{M}{3}[/tex] will be faster than Cart 1 because Cart 2 is three times lighter than Cart 1.

e) Given

m₁=  M

u₁ = 16m/s

m₂ =[tex]\frac{M}{3}[/tex]

u₂ = ?

from law of conservation of momentum

m₁u₁= m₂u₂

M× 16 = [tex]\frac{M}{3}[/tex] × u₂(multiply both sides by 3)

therefore, u₂ = [tex]\frac{3(M .16)}{M}[/tex] ("." means multiplication)

∴u₂ = 3×16 = 48 m/s