Answer:A:The track pushes back on Clinton's shoe with the same force.
Explanation:According to Newton's third law of motion, for every action force there is an equal and opposite reaction force. In this case, the action force is Clinton's shoe pushing on the track. As this happens, there is an equal and opposite reaction force in which the track pushes back on Clinton's shoe with the same force.
A tugboat is pulling a barge into a harbor. The barge is exerting a force of 3000 N against the tugboat.
Available options are:
A. –4500 N
B. –2500 N
C. 2500 N
D. 4500 N
Answer:
-4500 N
Explanation:
Given that we have F₁ = 3000N? (force of the barge)
the force of the tugboat is F '
To pull the barge, the force of the tugboat must be greater than or equal to the force of the barge.
Hence, according to Newton's third law which states that for every action or force in nature, there is an opposite reaction.
Therefore considering the available option the correct answer is "- 4500N, " this is because it is greater than the force of the barge and it's in opposition to the force exerted.
Answer:
The answer is -4500 N
Explanation:
A book is sitting on a table. Which of the following is true about the table? O A. It is pushing up on the book. O B. It exerts no force on the book at all. O C. It is pulling down on the book. D. It can affect the mass of the book.
Answer:
yes it does exert a force, it pushes it up
Explanation:
this is called normal force
if it didn't exert a force the book would keep going down
according to newton every force has an equal amd opposite reaction
so the book exerts a force on the table and vice versa
hope this helped
You are in a car traveling at 20 m/s. An ambulance is behind you traveling 35 m/s in the same direction. What frequency do you hear if the siren has a frequency of 550 Hz?
Answer:
The frequency heard is 576.78 Hz
Explanation:
The Doppler effect is defined as the apparent frequency change of a wave produced by the relative movement of the source with respect to its observer. In other words, this effect is the change in the perceived frequency of any wave motion when the sender and receiver, or observer, move relative to each other.
This is what happens in the first part of this problem, where the sender is train A and the receiver is train B. They are both moving in opposite directions. In this case, where both are in motion, the frequency perceived by the receiver will increase when receiver and transmitter increase their separation distance and will decrease whenever the separation distance between them is reduced. The following expression is considered the general case of the Doppler effect:
[tex]f'=f*\frac{v+-vR}{v+-vE}[/tex]
Where:
f ', f: Frequency perceived by the receiver and frequency emitted by the issuer respectively. Its unit of measurement in the International System (S.I.) is the hertz (Hz), which is the inverse unit of the second (1 Hz = 1 s-1)
v: Velocity of propagation of the wave in the medium. It is constant and depends on the characteristics of the medium. In this case, the speed of sound in air is considered to be 343 m / s
vR, vE: Speed of the receiver and the emitter respectively. Its unit of measure in the S.I. is the m / s
±, ∓:
We will use the + sign:
In the numerator if the receiver approaches the emitter In the denominator if the emitter moves away from the receiverWe will use the sign -:
In the numerator if the receiver moves away from the emitter In the denominator if the emitter approaches the receiverIn this case you are in a car traveling at 20 m/s and an ambulance is behind you traveling 35 m/s in the same direction.
In this case the receiver, you in the car, moves away from the emitter, while the emitter, the ambulance, approaches the receiver behind you in the same direction. So the frequency is calculated by the expression:
[tex]f'=f*\frac{v-vR}{v-vE}[/tex]
Being:
f= 550 Hzv=343 m/svR= 20 m/svE= 35 m/sand replacing:
[tex]f'=550 Hz*\frac{343 m/s-20 m/s}{343 m/s-35 m/s}[/tex]
you get:
f'= 576.78 Hz
The frequency heard is 576.78 Hz
Please answer quick - You find a chain of volcanoes along a coast on land, not too far inland from
the ocean. The region experiences frequent large earthquakes. What type of
plate boundary is this? What types of plates are involved? Where is this type of
boundary found in California?
Investigation to find out relationship between the current in the coil and the force on the iron disc
Answer:
Electromagnets are made of coils of wire with electricity passing through them. Moving charges create magnetic fields, so when the coils of wire in an electromagnet have an electric current passing through them, the coils behave like a magnet.
Explanation:
A sled starts off with an initial velocity of 8 m/s and slows down to 2 m/s after 3 seconds. What was its acceleration?
Answer:
-2m/s
Explanation:
physics help pleaseee
Answer:
the first questions answer is- the pressure is the same (balanced) outside and inside the window.
the second questions answer is- the atmospheric pressure increases.
Explanation:
I hope that this is what you were looking for.
1) A pendulum is configured to have a period of 2 seconds.
What is the length of the pendulum? (Use 10 m/s^2 for g)
If you doubled the length of the pendulum, what would its New Period be?
2) In a car collision, a car experiences a force for 1 seconds. The car’s mass is 700 kg and it was moving at 20 m/s before the collision and slowed down to 8 m/s.
What is the force on the car during the collision?
If the collision was with a 650 kg car that was at rest, what was the speed of the 650 kg car after the collision?
"The" (and any subsequent words) was ignored because we limit queries to 32 words.
PLS ANSWER FAST WILL GIVE BRAINLY!!!
In order for a roller coaster to work, why does the hill the cart climbs need to be higher than the top of the loop?
Answer:
The concept of potential energy, often referred to as energy of position, is very simple: As the coaster gets higher in the air, gravity can pull it down a greater distance. ... The potential energy you build going up the hill can be released as kinetic energy — the energy of motion that takes you down the hill.
Potential energy, also known as energy of position, is a pretty straightforward idea. As the roller coaster rises in the air, gravity has a greater ability to pull it down.
What does the hill the cart climbs need?An easy illustration involves a stopped car at the summit of a hill. The car drives faster as it goes down the hill, which results in an increase in kinetic energy and a decrease in potential energy. The vehicle changes kinetic energy into potential energy as it ascends the hill.
They are higher up at the top of the hill, thus they have more potential energy. Moving down a slope transforms potential energy into kinetic energy, while moving up a hill transforms kinetic energy into potential energy.
Therefore, You can release the potential energy you accumulate while climbing a hill as kinetic energy, which is the energy of motion that propels you down the hill.
Learn more about cart here:
https://brainly.com/question/7726236
#SPJ2
West
East
<
디
50 Newtons
40 Newtons
What is the net force on the box?
А
10 Newtons West
B
10 Newtons East
с
90 Newtons West
D
90 Newtons East
A . 10 Newton West
that's my Answer
Which type of earthquake waves are responsible for most of the damage caused by an earthquake? Why?
please helppppp its due tomorrow
Answer:
Surface waves travel along the surface. There are two types of body waves: P-waves travel fastest and through solids, liquids, and gases; S-waves only travel through solids. Surface waves are the slowest, but they do the most damage in an earthquake.
Answer:
surface waves
Explanation:
they have the strongest vibration and can cause the most damage
Hank's mother got tired of everyone's cell phones ringing during dinner, so she wrapped all
of the cell phones in aluminum foil at dinnertime. Which of the following best explains how
Hank's mother solved her problem?
Cell phone signals are electromagnetic waves, which are absorbed by the aluminum foil
Cell phone signals are electromagnetic waves, which are reflected by the aluminum foil
Cell phone signals are mechanical waves, which are absorbed by the aluminum foil
O Cell phone signals are mechanical waves, which are reflected by the aluminum foil
Answer:
Cell phone signals are electromagnetic waves, which are reflected by the aluminum foil
Answer:
I think the best answer would be the first but am I the only one wondering why the mom didn't just turn off the phone but instead she had to be extra and wrap them up like a gift to give them after dinner.
Help please!!! Physics circular motion
Answer:
2. 3.1415 m/s
3. 0.63m
4. 0.006 m/s^2
Explanation:
2. v=(2*pi*r))/T, put in values and solve.
3. Circumference=2*pi*radius, radius is 0.1m, plug in and solve.
4. a=(v^2)/r, (don't worry about converting to meters, since units are the same in kilometers, they will cancel out) plug in values and solve.
That's it!
name one material through which continuous flow of charge can be produced from chemical energy
Answer:
Battery.
Explanation:
A battery is a device that stores chemical energy, and converts it to electricity. This is known as electrochemistry and the system that underpins a battery is called an electrochemical cell. A battery can be made up of one or several (like in Volta's original pile) electrochemical cells
what physical properties dose plutonium
Answer:
Explanation:
Plutonium-239 is one of the two fissile materials used for the production of nuclear weapons and in some nuclear reactors as a source of energy. The other fissile material is uranium-235. Plutonium-239 is virtually nonexistent in nature. It is made by bombarding uranium-238 with neutrons in a nuclear reactor. Uranium-238 is present in quantity in most reactor fuel; hence plutonium-239 is continuously made in these reactors. Since plutonium-239 can itself be split by neutrons to release energy, plutonium-239 provides a portion of the energy generation in a nuclear reactor.
How much potential energy does a 4 kg object have that is 5 meters off the ground?
math pls help
HELP PLEASE
44. Two wave pulses are traveling along a string
toward each other as represented in the diagram
below.
(D is interference)
The phenomenon of interference occurs when two wave pulses are traveling along a string toward each other. Option D is correct.
What is the interference of waves?The result of two or more wave trains flowing in opposite directions on a crossing or coinciding pathways. This phenomenon is known as the interference of waves.
The effect is the sum of the individual wave amplitudes at each site where more than one wave is present.
When two wave pulses are traveling along a string toward each other. They meet and the phenomenon is occur known as interference.
Hence the phenomenon of interference occurs when two wave pulses are traveling along a string toward each other.
To learn more about the interference of waves refer to the link;
https://brainly.com/question/16098226
HELPPPP WILL MARK B IF CORRECT!!!!
Use the scenario below for questions 4-7.
A rocket launched at a 60-degree angle has a launch velocity of
31.00 m/s.
4. What is the magnitude of the rocket's initial vertical velocity?
a. 10 m/s
b. 15.5 m/s
c. 26.85 m/s
d. 31 m/s
Question 1 of 14 Which of the following statements describes a perfectly inelastic collision? O A. An ice hockey player picks up a trophy as he slides past it. O B. A baseball bat hits a baseball into the outfield. O C. A surfer falls off of his surfboard when a wave hits him. D. Two birds collide in midair and fly off in different directions.
Answer: A. An ice hockey player picks up a trophy as he slides past it
Explanation:
A PE X
The statement that best describes a perfectly inelastic collision is
C. A surfer falls off of his surfboard when a wave hits him.
What is collision?A collision is the interaction between two bodies in such a way that the momentum and velocity of one body gets changed due to the presence of other body. There are three types of collision-
1. Elastic collision
2. Inelastic collision
3. Perfectly inelastic collision.
In all types of collision , the momentum of the system before collision and after collision always remains same or we can say that momentum is conserved in collisions
What is elastic collisionAn elastic collision is the one in which kinetic energy is also conserved and coefficient of restitution is one. Both the bodies move separately with different velocities after elastic collision.
What is inelastic collision ?In inelastic collision there is a loss of kinetic energy and coefficient of restitution is less than one.
What is perfectly inelastic collision?In perfectly inelastic collision there is maximum loss of kinetic energy and coefficient of restitution is zero. Both the bodies stick together after collision and move with same velocity
What is coefficient of restitution ?Coefficient of restitution is the ratio of relative velocity of separation after collision to relative velocity of approach before collision.
A surfer falls of his surfboard when a wave hits him is an example of perfectly inelastic collision because in this when water hits the surfers he falls of and sticks to the water , and will also now move with the velocity of water .
So when the surfer falls off his surfboard when a wave hits him is perfectly inelastic collision.
To know more on collision here
https://brainly.com/question/13876829?
#SPJ2
A wave has a period of 4 seconds. Find it’s frequency.
Answer:
4 x the frequncy
Explanation:
So 4 x the number
SOMEONE PLEASE HELP ME
The average kinetic energy of the particles of two pieces of iron at the same temperature and mass would be __________.
Question 1 options:
Different
The same
Not equivilent
With in 500 degrees of eachother
Answer:
The same.
Explanation:
Temperature is a measure of the average kinetic energy of a substance; if two pieces of iron have the same temperature, then their particles will have the same amount of average kinetic energy.
Answer 1 - The average kinetic energy of the particles of two pieces of iron at the same temperature and mass would be the same
Answer 2 - The particles of an object move FASTER when the temperature increases
Answer 3 - When a tight fitting lid is run under hot water, the lid
E/X/P/A/N/D/S as the temperature increases.
Answer 4 - I dont know sorry!
Answer 5 - What happens when something reaches absolute zero?
The p a r t i c l e s completely stop moving
difference between sold and liquid
Explanation:
Solids have closely packed particles and vibrate about a fixed position, they also have a fixed volume.
liquid have close particles but which are able to move with a bit of kinetic energy, for this reason they have no fixed volume but take the volume of the container or vessel
The cerebellum is part of the
____?
Explanation:
i think it the central nervous system
A 55 kg boy is riding a skateboard at a speed of 1.0 m/s. What is his
kinetic energy?
Answer:
27.5
Explanation:
KE=1/2m(v)^2
PLEASE HELP AM I CORRECT??!!
. ........... is a mirror with a flat reflecting surface and is made of ordinary glass.
Answer:
Plane mirror.
Explanation:
A plain mirror is a mirror with a flat reflecting surface and is made of ordinary glass.
Reflection can be defined as a phenomenon which typically involves a change in the direction of a ray of light or waves as it falls on a smooth surface.
Simply stated, reflection occurs when a ray of light or wavefronts bounces off a smooth surface such as a plane mirror.
Generally, the angle of reflection equals the angle of incidence when a light ray strikes or hits a plane mirror.
The properties or characteristics of the images formed by a plane mirror include;
I. They are virtual and erect (upright).
II. It is the same size as the object formed.
III. It has the same distance from the plane mirror as the distance of the object from the mirror.
If a ball is rolling down a hill, it has both kinetic and potential energy. The ball has
38 J of potential energy because of its height and 80J of kinetic energy because
of its motion. How much mechanical energy does the ball have
The answer is 118 J :)
Explanation:
38 +80 = 118.
What is the cheetahs momentum?
Answer:
Momentum is mass*velocity. Cheetah: 74*31 = 2294 kg-m/s.
Help!Yall get brainliest
Answer:
Explanation:
Good sources include barley, oatmeal, beans, nuts, and fruits such as apples, berries, citrus fruits, and pears. Many foods contain both soluble and insoluble fiber. In general, the more natural and unprocessed the food, the higher it is in fiber. There is no fiber in meat, dairy, or sugar.