Answer:
[tex]59000[/tex]
[tex]1.8\times 10^5[/tex]
[tex]4.3\times 10^{-2}[/tex]
[tex]9.0\times 10^{-6}[/tex]
[tex]8.4\times 10^{-6}[/tex]
Explanation:
The given numbers are
[tex]1.8\times 10^5=18000[/tex]
[tex]4.3\times 10^{-2}=0.043[/tex]
[tex]8.4\times 10^{-6}=0.0000084 [/tex]
[tex]9.0\times 10^{-6}=0.000009[/tex]
[tex]59000[/tex]
The arrangement of the numbers from largest to smallest is
[tex]59000[/tex]
[tex]1.8\times 10^5[/tex]
[tex]4.3\times 10^{-2}[/tex]
[tex]9.0\times 10^{-6}[/tex]
[tex]8.4\times 10^{-6}[/tex].
1.
In the notation, 1s2, the number 1 represents the ________ __________ where electrons are located.
energy level
outer shell
2.
The four parts, or blocks, on the periodic table are _____, _____, d, and f.
s, p
a, b
3.
The 2 in 1s2 represents the number of __________ located in that energy level.
electrons
protons
Answer:
energy level
s,p
electrons
Explanation:
I already done this trust me
In the notation 1 s² number 1 represents energy levels where electrons are located.The 4 parts on periodic table are s,p,d and f blocks.The 2 in 1 s² represents number of electrons in energy level.
What is an energy level?Electrons present in an atom revolve in different orbits which are stationary states and are also called as energy levels. The energy levels are numbered as integers which are also called as principal quantum numbers.
Energy of the stationary state is given as E= -R
1/n² where R
is the Rydberg's constant. When an electron is excited, and it moves from lower to higher energy levels there is absorption of energy, while when it moves from higher energy level to lower energy level it radiates or gives out energy in the form of radiation.
They can also be defined as the distances between electron and nucleus of an atom . Electrons present in K energy level have least energy .Energy level diagrams are studied to understand nature of bonding , placement of electrons in orbits and and elemental behavior under certain conditions.
Learn more about energy level,here:
https://brainly.com/question/12806827
#SPJ2
A 2.34-kg gun has a recoil velocity of 5.2 m/sec. At what velocity does it fire its 95-gram bullets?
Explanation:
We need to use the conservation of energy to help us solve this one.
The energy imparted onto the bullet projectile is equal to the energy imparted into the recoiling gun. We can ignore potential energy and only consider the kinetic energy of the two masses (bullet and gun).
Remember that kinetic energy is expressed as [tex]K_E = \frac{1}{2}mv^2[/tex]
Conservation of energy means that both the gun and the bullet have the same amount of energy.
[tex]\frac{1}{2}m_gv_g^2 = \frac{1}{2}m_b v_b^2[/tex]
We'll want to put the mass terms into the same units. So the gun has a mass of 2340 grams.
PLEASE ANSWER ASAP BEFORE MY TEACHER AND MY MOM KILLES ME PLEASE ASAP
The first person with the right answer gets to be a brainlest
In the attachment there is a density column where there is colour
Question: tell me why is the red at the bottom of the density column if it is the least dense
Explanation: That is not meant to be red, it‘s the bottom of the beaker. The star is at the very bottom of the beaker. it’s just the base of the beaker.
Write a paragraph describing Newton's 2nd Law in YOUR OWN WORDS.
Explanation:
if u apply more force to an object, it accelerates at a higher rate
Which ray diagram demonstrates the phenomenon of absorption?
Answer:
B
Explanation:
The ray diagram demonstrated the phenomenon of absorption in B. Hence, option B is correct.
What is absorption?Absorption is the phenomenon of electromagnetic radiation taking up the energy of photons and it also transfers the electromagnetic energy to the internal energy of the absorber.
Absorption refers to the transfer of the energy of a wave to matter as the wave passes through it. The process in which the light waves get converted into energy. Absorption causes attenuation of the waves and the intensity decreases gradually when the light waves propagate through the medium.
From the given, the first diagram represents the light passes through the slit, it gets diffracted and forms alternate bright and dark fringes in the screen. The third diagram represents that the light ray strikes the surface it gets reflected and the path of light gets changed.
Thus, the absorption is the ray diagram given in the second image. Hence, option B is correct.
To learn more about Wave interactions:
https://brainly.com/question/29767263
#SPJ7
The winter solstice, the shortest day of the year in the Northern hemisphere, occurs when the Earth is in which position?
Answer:
A
Explanation:
what is physical quantity
Answer:
physical quantity is a property of a material or system that can be qualified by measurement
[tex] \huge\mathfrak{ANSWER}[/tex]
the quantities by meals of which we describe the law of physics are known as physical quantities.
in order to measure a physical quantity we as you my certain magnitude of this quantity a standard and call its unit of that quantity to express the measurement of any physical quantity two thing must be mentioned.
the unit in which the quantity is measured.the numerical value which do not the magnitude of that quantity in term of the choosen unit.For Example -:
when we say that the length of a road is 20 m its mean that the unit of length is matter and the length of rod 20 time magnitude of metre.in other number the numerical value of physical quantities inversely proportional to its unit if N1 and N2 be the numerical value of a physical quantity into different unit u1 and u2 then[tex] \bold{ n_1 (u_1) = n_2(u_2)}[/tex]
PLEASE ANSWER ASAP BEFORE MY TEACHER AND MY MOM KILLES ME PLEASE ASAP
The first person with the right answer gets to be a brainlest
In the attachment there is a density column where there is colour
Question: tell me why is the red at the bottom of the density column if it is the least dense
Answer:
because it’s on the bottom, and to get to that part of it, think of it like that scene from moana when they go down into the realm of monsters they go through the thick parts to get to the thin parts, soo the cube wouldn’t be nearly able to reach that level
Explanation:
Answer:
the red at the bottom should not count, but the red at the top is the least dense because it floats upon the other liquids
Explanation:
hope this helps
6.
A runner completed the 100.-meter dash in
10.0 seconds. Her average speed was
A) 10.0 m/s
B) 1,000 m/s
C) 0.100 m/s
D) 100 m/s
Answer:
A) 10.0 m/s
Explanation:
the formula for average speed is v=d/t
the distance is 100 meters
The time is 10.0 seconds
so v=100m/10.0s
= 10.0m/s
so the runners average speed was 10.0m/s
The average speed of the runner is equal to 10.0 m/s. Therefore, option (A) is correct.
What is speed?The speed of a body can be described as the distance covered in a definite time interval. The average speed can be defined as a scalar parameter as it possesses magnitude with no direction.
The speed can be determined from the ratio of the distance traveled by the object to the time taken to travel that distance.
The speed of any object can be calculated from the formula equation mentioned below:
Speed = total distance /time taken
Given, the distance covered by the runner = 100 m
The time taken by the runner, t = 10.0 s
The average speed of the runner can be calculated from the formula as shown below:
Speed = 100/10 = 10 m/s
Therefore, the average speed of the runner is 10.0 m/s.
Learn more about the speed, here:
brainly.com/question/12322912
#SPJ2
A He-Ne laser produces 633 nm light.
When it passes through a diffraction
grating with d = 5.55 x 10^-6 m, what is
the angle of its third order (m = 3)
maximum?
Answer:
20.0086
Explanation:sin^-1(3×633×10^-9)÷5.55×10^-6Answer:
20.0086
Explanation:
Acellus
The force of water flowing over a dam spillway is to be measured in a geometrically similar small-scale laboratory model. The width of the prototype is 30 m and the width of the model is 2 m. If the force on the model spillway is measured to 10 kN, the expected force on the prototype spillway for dynamically similar conditions is:
Answer:
Jay shree krishna j to the same time kr rhe h u have UCC fm rob and studing a few minutes ago
New 5G networks utilize millimeter-wave radiation. Millimeter-wave radiation refers to electromagnetic waves with frequencies in the range of 30-300 GHz. What are the free-space wavelengths that correspond to this frequency range
Answer:
It corresponds to 1mm-10 mm range.
Explanation:
Electromagnetic waves (such as the millimeter-wave radiation) travel at the speed of light, which is 3*10⁸ m/s in free space.As in any wave, there exists a fixed relationship between speed, frequency and wavelength, as follows:[tex]v = \lambda * f (1)[/tex]
Replacing v= c=3*10⁸ m/s, and the extreme values of f (which are givens), in (1) and solving for λ, we can get the free-space wavelengths that correspond to the 30-300 GHz range, as follows:[tex]\lambda_{low} = \frac{c}{f_{high}} = \frac{3e8m/s}{300e9Hz} = 1 mm (2)[/tex]
[tex]\lambda_{high} = \frac{c}{f_{low}} = \frac{3e8m/s}{30e9Hz} = 10 mm (3)[/tex]
The largest planet in the solar system is Jupiter,with a diameter of 71,398 km. What is the diameter of Jupiter in centimeters?
Answer:7139800000
Explanation:
The largest planet in the solar system is Jupiter. Its equatorial diameter is approximately 143,000 kilometres (ca. 88,856 mi miles).
What diameter of Jupiter in centimetres?Jupiter is a gas giant because it consists largely of gas and liquid, as opposed to solid substance. With an equator diameter of 142,984 kilometres (88,846 mi), it is the solar system's biggest planet.
About 80% of Jupiter is hydrogen, and 20% is helium. Over a solid core, a thick layer of liquid hydrogen is covered by swirling gas. At 1,000 kilometres below the cloud layer's outer edge, there is a lot of pressure. The hydrogen gas changes into a liquid there.
Therefore, By squaring the scale factor for length, the scale factor for area may be calculated. Consequently, s2 is the scale factor for area. If the situation is the opposite, a solution to the issue under investigation is offered. The area scale factor is 2.
Learn more about Jupiter here:
https://brainly.com/question/20979520
#SPJ2
Two forces whose resultant is 100newton are perpendicular to each other. If one of them makes an angle of 60newton with the resultant. Calculate it magnitude
Answer:
100 N
Explanation:
Given that,
Two forces whose resultant is 100newton are perpendicular to each other.
If one of them makes an angle of 60newton with the resultant.
[tex]F_1=100\times \sin60=86.60\ N[/tex]
and
[tex]F_2=100\times \cos60=50\ N[/tex]
The magnitude of force,
[tex]F=\sqrt{F_1^2+F_2^2} \\\\F=\sqrt{86.6^2+50^2} \\\\F=99.99\ N[/tex]
or
F = 100 N
So, the magnitude of force is 100 N.
All motion will eventually stop due to the "loss" of energy to___.
a) friction and thermal energy
b) gravity
c) kinetic energy
d) potential energy
importance of choke coil?
Answer:The choke coil works because it can act as an inductor. When the current pass through will change as AC currents creates a magnetic field in the coil that works against that current. This is known as inductance and blocks most of the AC current from passing through.
Explanation:
Egg A is dropped from a height of 1m onto the floor. Egg B is dropped from a height of 1m into a bucket of water. Which statement
correctly describes why Egg B does not break?
Answer:
maybe it's because a bucket of water has more density than egg B
Answer:
Egg B experiences less force over a shorter time
Explanation:
Which observation is the best evidence that some colors of visible light are
being absorbed in this photo?
A. The man's head is distorted under the water.
B. The top of the man's head appears disconnected.
C. The shape of the man's arm is clearly seen underwater.
D. The snorkel in the man's mouth appears yellow.
Answer:
D-The snorkel in the mans mouth appears yellow
Explanation:
Answer D is the only example related visible light being absorbed.
_H₂ + O₂- _ H₂O. how do you balance this equation
Answer:
first balance hydrogen.
Explanation:
2H2+O2---->2H2O
Answer:
2H^2 + 2H^2O
Explanation:
Put a 2 in front of both H's and the H's will be 4 and the O's will be 2. The chemical equation is balanced.
Which of the moon's properties prevents it from being pulled inward by Earth?
O gravity
O inertia
O shape
O structure
Answer:
O inertia
Explanation:
The moon's property that prevents it from being pulled inward by the Earth is called it's inertia.
Every object in the universal space have gravitational force of attraction to one another due to their masses.
An inertia is the reluctant of a body to move or the tendency of it to remain in constant motion.
Inertia entails the property of objects to remain at rest or continue in uniform motion.
As the force of gravity acts between the earth and the moon, inertia keeps a body in constant position.
58) Two balls, A and B are simultaneously projected from the top
of a building at 10 mis upwards & 20 m/s downwards respectively. Find
out the separation btwn them 3 sec after projection.
Answer:
90 m
Explanation:
For ball A::
The equation of a ball moving upwards is given by the formula:
s = ut - (1/2)gt²
where u is the initial velocity, t is the time covered, g is the acceleration due to gravity = 10 m/s² and s is the distance travelled.
Given that:
u = 10 m/s, t = 3 sec, g = 10 m/s², hence:
s = (10 * 3) - (1/2) * 10 * 3²
s = 30 - 45
s = -15 m
The negative sign means the object travels in the opposite direction. Hence s = 15 m
For ball B::
The equation of a ball falling downwards is given by the formula:
s = ut + (1/2)gt²
Given that:
u = 10 m/s, t = 3 sec, g = 10 m/s², hence:
s = (10 * 3) + (1/2) * 10 * 3²
s = 30 + 45
s = 75 m
Hence the separation between the two balls after 3 sec of projection = 15 m + 75 m = 90 m
What is your average velocity after going 15 meters east followed by 20 meters
west in 10 seconds?
Answer:
0.5 m/s
Explanation:
Velocity = displacement/time taken
going 15 meters east and then 20 meters west gives a displacement of 5 meters.
Velocity v = 5/10
= 0.5 m/s
The average velocity of a tennis ball is measured during serving and found to be 216 km/hr.
Calculate the time elapsed between hitting the ball and meeting the ground if the distance covered by the ball during that interval is 20m
PLEASE ANSWER WITH EXPLANATION :)
Answer:
The time between hitting the ball and meeting the ground is [tex]t=0.33\: s[/tex]
Explanation:
We have a semi parabolic motion here. We know that the initial speed 216 km/h or 60 m/s in the x-direction.
So we can use the following equation:
[tex]v=\frac{\Delta x}{\Delta t}[/tex]
[tex]60=\frac{20}{t}[/tex]
[tex]t=\frac{20}{60}[/tex]
[tex]t=0.33\: s[/tex]
hope it helps you!
If the column of mercury in a barometer stands at 72.6 cm, what is the atmospheric pressure?
(The density of mercury is 13.6 X 103 kg/m3 and g = 9.80 m/s2)
Answer:pressure = density * acceleration due to gravity * height
H=72.6cm= 0.726m
P=0.726*13.6*10^3*9.8
P=96761.28Pa
Explanation:
The atmospheric pressure if the column of mercury in a barometer stands at 72.6 cm is 9.68 × 10⁴ Pa.
What is Pressure?The stress at a location within a confined fluid or the perpendicular force per unit area are the two definitions of pressure used in the physical sciences. A 42-pound box with an area of 84 square inches at the bottom will apply pressure on a surface equal to the force divided by the surface area.
Given:
The height in the barometer, h = 72.6 cm or 0.726 m,
The density of mercury, d = 13.6 × 10³ kg/m³,
The gravitational acceleration, g = 9.80 m/s²,
Calculate the atmospheric pressure by the following formula,
P = dgh
Here, P is the atmospheric pressure
Substitute the values,
P = 13.6 × 10³ × 9.80 × 0.726
P = 9.68 × 10⁴ Pa,
Therefore, the atmospheric pressure if the column of mercury in a barometer stands at 72.6 cm is 9.68 ×10⁴ Pa.
To know more about Pressure:
https://brainly.com/question/28343308
#SPJ2
The asteroid Icarus orbits the sun like other planets. Its period is about 410 days. What is its mean distance from the sun
Answer:
Mean distance = 1.61 x 10^8 km
Explanation:
Given the following data;
Orbital period for Icarus, T2 = 410 days
To find the mean distance of Icarus, we would use Kepler's third law of motion.
According to Kepler's third law of planetary motion, the square of any planetary body's orbital period (P) is directly proportional to the cube of its orbit's semi-major axis.
Mathematically, it is given by the formula;
[tex] (\frac {T_{1}}{T_{2}})^2 = (\frac {r_{1}}{r_{2}})^3 [/tex]
Where;
T1 & T2 is the orbital period of a planetary object.
r1 & r2 is the mean distance of a planetary object.
Also, we know that the orbital period for earth, T1 = 365 days
Mean distance of earth = 1.49x10^8 km
Substituting into the equation, we have;
[tex] (\frac {365}{410})^2 = (\frac {1.49x10^{8}}{r_{2}})^3 [/tex]
[tex] (\frac {365}{410}})^2 = (\frac {1.49x10^{8}}{r_{2}})^3 [/tex]
[tex] (0.8902)^2 = (\frac {1.49x10^{8}}{r_{2}})^3 [/tex]
[tex] (0.7925) = (\frac {1.49x10^{8}}{r_{2}})^3 [/tex]
Cross-multiplying, we have;
[tex] (r_{2})^3 = \frac {1.49x10^{8}}{0.7925} [/tex]
Taking the cube root of both sides;
[tex] r_{2} = 1.61 * 10^8 km[/tex]
Which is not part of a DC motor?
Answer:
The correct answer to the question will be compass i.e compass is not a part of a DC motor. Various parts of a DC motor are coil of wire, armature, field magnets, brushes and commutator. The coil of wire plays a vital role in DC motor.
Explanation:
The properties of elements can be predicted by which of the following?
Answer:
1 Answer. The Periodic Table can predict the properties of new elements, because it organizes the elements according to their atomic numbers. Creating new elements is not a simple process. Scientists use a particle accelerator to smash light atoms into a thin metallic foil that contains heavier atoms.
Explanation:
hii Happy New year can you all please answer this
Answer:
truuuuuuuuuuuuueeeeeeeee
a student attaches a 0.5 kg object to a 0.7 m string and rotates the object around her head and parallel to the ground. how much tension force is required to make the object rotate with a speed of 12 m/s?
The object would have a centripetal acceleration a of
a = (12 m/s)² / (0.7 m) ≈ 205.714 m/s²
so that the required tension in the string would be
T = (0.5 kg) a ≈ 102.857 N ≈ 100 N
(rounding to 1 significant digit)
What is my name?:
I am a god
I am a guardian of the sun
I am used to measure heat.
Answer:
Apllo?
Explanation: