Answer:
about 42m 3
copied from google
hope that helps
approximately 42m 3 was Able Hill
plz help meh, I think there is trick question!!!
Answer:
Explanation:
Atoms of each element contain a characteristic number of protons. In fact, the number of protons determines what atom we are looking at (all atoms with six protons are carbon atoms), the number of protons in an atom is called the atomic number. In contrast, the number of neutrons for a given element can vary.
I hope I helped you!
Answer:
Atoms of each element contain a characteristic number of protons. In fact, the number of protons determines what atom we are looking at (e.g., all atoms with six protons are carbon atoms); the number of protons in an atom is called the atomic number. In contrast, the number of neutrons for a given element can vary.
Explanation:
So i would say C
You are stranded on survivor island in which there are already 375 other survivors. For every survivor there are two hands, for every hand there is an eye; for every eye, there is a footprint; and for every 4 footprints, there is a dinosaur; for every half dinosaur, there are40 ducks; for every 20 ducks, there are 32 pineapples; for every 12 pineapples, there is 1 palm tree; for every 30 palm trees, there is 1 wave; for every wave, there are 100 anchors; and for every anchor, there are 30 turtles. How many turtles are on the island? Use dimensional analysis to solve this calculation.
Answer:
its in the answer
Explanation:
brownie mix a homogeneous or a heterogeneous mixture
pls helpppp
similarities about homogeneous and heterogeneous mixtures
Answer:
A homogeneous mixture has the same uniform appearance and composition throughout. Many homogeneous mixtures are commonly referred to as solutions. A heterogeneous mixture consists of visibly different substances or phases. The three phases or states of matter are gas, liquid, and solid.
Explanation:
yea
which statement best describes what happens when you hold a cold drink in your hand?
Answer:
heat will flow from your hand (the warmer object) to the cup (the colder object), and your hands will start to feel cold because their losing heat energy
1. Which statement best describes why a gas is
easily compressible while most solids
are incompressible?
A. The molecules of a gas are much smaller
than those of a solid.
B. The molecules of a solid are not attracted to
one another.
C. The molecules of a gas are much further
apart than those of a solid.
D. The molecules of a solid are much larger
than those of a gas.
C) The molecules of a gas are much further
apart than those of a solid.
A gas is easily compressible while most solids are incompressible because the molecules of gas are much further apart than those of a solid.
What are gases?Gases is one of the four fundamental state of matter.
Gases can be defined as phase of matter that neither have fixed shape nor have fixed volume.
The molecules of gases are far apart from each other as compare to other phases of matter.
The change in properties of volume is known as compressibility and those fluid whose volume changes are known as compressible fluids or gases.
The fluids which does not compressed or expanded and its volume remain constant are known as incompressible fluids or gases.
Thus, gas is easily compressible while most solids are incompressible because the molecules of gas are much further apart than those of a solid.
To learn more about gases, refer to the link below:
https://brainly.com/question/1369730
#SPJ2
Which of these elements have just one valence electron?
Answer:
Only Hydrogen and Group 1 elements have 1 valence electron
Explanation:
the valence number of electrons is the group number in the periodic table. So, the group 1 atoms( along with hydrogen) have 1 outer-shell electrons [valence electrons]
Which would most likely be done while designing a solution?
researching the current uses of a fuel type
sketching a diagram of a new medical device
reporting the results of using a prototype
redesigning a model airplane that did not fly well
Answer:
sketching a diagram of a new medical device (b)
Explanation:
its on edge technical design not d i got that one wrong
Answer:
the answer is b
Explanation: i took the test edge 2021
Describe how you would measure the density of a boat (how would you predict if it would float )
Answer:
Please find the description below
Explanation:
The density of a substance refers to its mass per unit of its volume i.e the amount of a substance contained in a given volume. The density is calculated using the formula:
Density = mass/volume
Using this formula, with the known value for mass and volume of the boat, the density of the boat can be calculated.
An object will FLOAT on a liquid substance if its density is lower than that of the liquid while it will SINK if it has a higher density than that of the liquid.
In this case, with a known density of water, which is 1g/cm^3 or 1000kg/m^3,
a boat placed on water will FLOAT if its density is <1g/cm^3 (less than) while it will SINK if its density is >1g/cm^3 (greater than).
Look at the picture. Assume that all of these substances are in different containers. In all of
these substances, atoms have combined to form
ions
elements
molecules
mixtures
Answer:
Elements?
Explanation:
Im not sure but I think its elements because carbon dioxide is, and the others sound like it too
Which statement describes a controlled experiment? A.) It has one group in which the controlled variable is tested, and another in which the manipulated variable is tested. B.) It has one group in which the responding variable is tested, and another in which the responding variable is not tested. C.) It has one group in which the manipulated variable is tested, and another in which the responding variable is tested. D.) It has one group in which the manipulated variable is tested, and another in which the manipulated variable is not tested.
Answer:C.) It has one group in which the manipulated variable is tested, and another in which the responding variable is tested
Explanation: hope this helps
The statement that describes a controlled experiment is that it has one group in which the manipulated variable is tested, and another in which the responding variable is tested (option C).
What is a controlled experiment?A controlled experiment is an experiment where one variable is tested at a time and all other variables are kept constant.
An experiment consists of a manipulated or independent variable, which is the variable changed, and a responding or dependent variable, which is the variable measured.
Therefore, statement that describes a controlled experiment is that it has one group in which the manipulated variable is tested, and another in which the responding variable is tested.
Learn more about experiment at: https://brainly.com/question/11505552
#SPJ5
Write and balance this equation. Solid iron reacts with fluorine gas to produce crystalline iron(III) fluoride.
Answer:
iron+flourine.............iron flouride
Fe+F2.............FeF3
the above reaction is not balanced
now to balance this reaction
2Fe+3F2...........2FeF3
now this reaction is balanced
The balanced equation is: 2Fe + 3F2 ⇒ 2FeF3
How to balance an equation?A chemical equation needs to be balanced if you want to make the wide variety of the atoms of the reactants equal to the variety of the atoms of the goods.
Given,
Iron + fluorine ⇒ Iron Flouride
Fe + F2 ⇒ FeF3
Now to balance this reaction:
2Fe + 3F2 ⇒ 2FeF3
This reaction is balanced.
What is iron fluoride used for?
This medicine is a mixture manufactured from nutrients, iron, and fluoride. it's miles utilized in infants and youngsters to deal with or prevent deficiency because of terrible weight loss programs or low tiers of fluoride in drinking water and other sources.
Learn more about iron fluoride here: brainly.com/question/24072912
#SPJ2
If the density of water is 1.0 g/mL, what is the mass of 2.0 L of water?
Answer:
Density=1.0 g/mL
Volume=2.0 L
Mass=?
Density=mass/volume
Mass=density*volume
Mass=1.0*2.0
Mass=2g
A wind up toy that is wound up and moving
Answer:
A wind-up toy is wound up and moving across level ground. The toy is speeding up.
Explanation:
this will or should helpyou
What is mass in grams of 300 ml of salt water with a density of 1.30 grams per centimeter cubed
Answer:
The answer is
390 gExplanation:
The mass of a substance given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
Density = 1.30 g/cm³
volume = 300 mL
Substitute the values into the above formula and solve
That's
mass = 1.3 × 300
We have the final answer as
390 gHope this helps you
dimensional analysis 9 lemons = 1 orange How many lemons in 10 oranges?
1. Which number is more accurate if the correct number is 3.5. Is it 3.1, 3.3, 3.6, or 4.0?
Answer:
3.6
Explanation:
3.6 is only 0.1 away from 3.5
I hope this helped and plz give brainliest!
Environmental science is a *
A. narrowly defined set of physical, life, and social sciences.
B. subject that only deals with the environment.
C. collective of like-minded people that attempt to raise awareness and take action to protect our environment.
D. interdisciplinary subject used to gain knowledge about the environment.
A single paper clip weighs about one gram. So 10 paper clips would weigh?
Is this atom Reactive (unstable) or Unreactive (stable) ?
Answer:
The answer is Unreactive.
Explanation:
This is an unreactive atom because it has completely filled out stable electrons in the outer shell.
8 electrons in the outer shell means stable.
This beaker is filled with three liquids of different colors and densities. Which color substance is the most dense? How do you know
Answer:
the one at the bottom
Explanation:
the more dense an object is in this kind of demonstration (which is called a density tower btw) the lower it'd be so taking this reason into consideration the lowest would be the densest
Physical and chemical properties
Answer:
Chemical properties
-It is not reverseable
-Change in energy is seen
-It is permanent change
-The change take place in both physical and chemical properties of matter
Physical properties
-The change takes place only in physical property of matter
-It can be reversed back
-It is temporary change
-Change in energy is not seen
A) remove 1.5ml of liquid
B) add 1.5 ml of liquid
C) remove 0.5 ml of liquid
D) add 0.5 mo of liquid
What should you always do at the end of a lab
Answer:clean up the area
Explanation:
what do isotopes have in common
Answer:
Isotopes are atoms of the same element that have different numbers of neutrons but the same number of protons and electrons. The difference in the number of neutrons between the various isotopes of an element means that the various isotopes have different masses.
(if this help pls mark as brainliest :))
Answer:
Number of protons
Explanation:
Isotopes are the same atom of an element with same
number of protons but different number of Neutrons.
Students learned that objects can exert forces on other objects without touching. Which three investigations will provide evidence what they have learned. a measuring how close a soda can must be before it rolls toward a balloon that has been rubbed
Answer:
b
Explanation:
plz answer soon need answer
when talking about sodium carbonate reaction as the amount of surface area increases what happens to the rate of this reaction????
rate is faster
rate is slower
rate stays same
Answer:
rate is faster
Explanation:
the rate of reaction increases.
Answer:
The rate is faster
Explanation:
just did it on edg :)
Approximately how tall is Baker Hill? Don't forget your unit
Answer:
the elevation is 1,539
Explanation:
Which of the following is NOT an extensive property?
Answer:
Density
Explanation:
It's an intensive property because it doesn't depend on mass
Match the labels to the
diagram.
Cell
Vacuole
membrane
Nucleus
Endoplasmic
reticulum
Ribosomes
Lysosome
Golg!
Mitochondrion
body
Answer:
Explanation hope this help and i hope this is the right answer for the question