Applying fatigue failure criteria in 3D, determine the final relation (equation) for the following cases: - Considering only the internal pressure fluctuating from Pmax to Pmin Numerical Application: Pmax=1.0P and Pmin=0.2P σu= 690 MPa σe= 345 MPa Kf=1 ; Define P ? - Considering completely reversed internal pressure (P) and completely reversed bending moment (M) Write just the final equation (no numerical application)

Answer:

Hello your question is incomplete attached below is the complete question

answer :

I) P = t/R * 492.85

II) The final equation : PR / t  + 4M/πR3 =  б e

Explanation:

attached below is a detailed solution to the given problem

i) P = t/R * 492.85

ii) Final equation : PR / t  + 4M/πR3 = б e

g ) Water is the working fluid in an ideal regenerative Rankine cycle with one closed feedwater heater. Superheated vapor enters the turbine at 16 MPa, 560 oC, and the condenser pressure is 8 kPa. The cycle has a closed feedwater heater using extracted steam at 1 MPa. Condensate drains from the feedwater heater as saturated liquid at 1 MPa and is trapped into the condenser. The feedwater leaves the heater at 16 MPa and a temperature equal to the saturation temperature at 1 MPa. The mass flow rate of steam entering the first-stage turbine is 120 kg/s. Determine (a) the net power developed, in kW.

2.3
What does NBT stand for?​

PLZ HELP I GIVE BRAINLIEST!!

Please I need help with this

Photosynthesis energy is stored in the cells of green plants through
process called ______?

We have a parallel-plate capacitor with plates of metal each having a width W and a length L. The plates are separated by the distance d. Assume that L and W are both much larger than d. The maximum voltage that can be applied is limited to V max =K d, in which K is called the breakdown strength of the dielectric. Derive an expression for the maximum energy that can be stored in the capacitor in terms of K and the volume of the dielectric. If we want to store the maximum energy per unit volume, does it matter what values are chosen for L, W, and d? What parameters are important?

Consider a layer of insulation installed around a steam pipe. The radius of the pipe is R1 and the thickness of the insulation is R3-R1.The stream is maintained at a temperature TW and the air surrounding the insulation is at a temperature To and flows cross wise over the pipe. The air is flowed over the steam pipe at high enough velocity so a thermal boundary layer develops over the surface described by a heat transfer coefficient h.

Required:
Beginning with the heat equation, calculate the total quantity of heat being conducted per unit time (heat flow) through the insulation, Q (units: energy/time).

stole energy is also called