apollo spas services 297 hot tubs. if each hot tub needs 115 ml of muriatic acid, how many liters of acid are needed for all of the hot tubs?

The standard reaction free energy ΔG° is   -77.393 kJ for the following redox reaction using standard reduction potentials from the aleks data tab.

The redox reaction occurs at anode :

6Cl-(aq) + 2NO3-(aq) + 8H+(aq) → 3 Cl2(g) + 2NO (g) + 4H2O(l)

[tex]E^0_{cell}[/tex] = 0.957

[tex]E^0_{cell}[/tex] = 1.35827 - 0.957

[tex]E^0_{cell}[/tex] = 0.401

There were 2 moles of electrons involved in this redox reaction, according to the reaction.

[tex]G^0[/tex] = - (2) * 96,500 * 0.401

[tex]G^0[/tex] = - 77393 joules or -77.393 kJ

Hence, the standard reaction free energy is -77.393 kJ.

the complete question is:

Using standard reduction potentials from the ALEKS Data tab, calculate the standard reaction free energy for the following redox reaction. Round your answer to 3 significant digits.

6Cl-(aq) + 2NO3-(aq) + 8H+(aq) -> 3 Cl2(g) + 2NO (g) + 4H2O(l)

learn more about redox reaction here

https://brainly.com/question/13293425

#SPJ4

The 38.59 gram of oxygen is required to burn 11gram of octane.

2C8H18 + 25O2 = 16CO2 + 18H2O

The complete combustion of 2 x114 gram of octane require 25 x 32 gram of oxygen.

so the 11 gram of octane needs 38.59 gram of oxygen according to balanced chemical equation.

Alkane releases a tremendous amount of heat energy when heated in the presence of enough oxygen or air to form carbon dioxide and water. It happens when there is not enough oxygen present for the complete combustion of the fuel. As a result, carbon or carbon monoxide is produced. A poisonous gas called carbon monoxide is produced as a byproduct and is colorless.

Hence, octane undergoes complete combustion with oxygen.

To know more about Combustion.

https://brainly.com/question/15117038

#SPJ4

When the gas emits at a rate that is 0. 667 times that of CO₂, it has a molar mass of 62.9 g/mol.

Graham's Law states that a gas's rate of effusion is inversely related to the square root of its molar mass.

√[M(b)/M(a)] = R(a)/R(b)

R is the effusion rate.

square root = sqrt = √

the molar mass, M

Square root of R(a)/R(CO) is √[M(CO)/M(a)].

(0.667)² = 28 g/mol/ M(a)

( by squaring both sides)

M(a)(0.667)² = 28

M(a) = 28/(0.667)²

M(a) = 62.9 g/mol.

The molar mass of the unidentified gas is 62.9 g/mol.

What effect has Graham's law?

According to Graham's law of diffusion, the ratio of the square root of the molecular weights of gas particles to their diffusion rates is equivalent.

To know more about Graham's law of diffusion, visit:

brainly.com/question/14004529

#SPJ4

In order for 0.36 mol of lead to totally react, 0.72 mol of Hydrochloric acid is required.

In the food, textile, metal, or rubber sectors, hydrogen chloride (HCl) is frequently employed as a bleaching agent to neutralize alkaline substances. When discharged into the soil, it is neutralized, and when it comes into contact with water, it hydrolyzes quickly.Low concentrations exposed over an extended period of time may damage and stain teeth. The EPA has not rated the carcinogenicity of hydrochloric acid.

Chemical burns from hydrochloric acid can be extremely painful if they come into contact with epidermis or other tissues. Ingestion of hydrochloric might result in blindness. The amount of acid present determines how severe the burns.

To know more about hydrochloric acid visit:

https://brainly.com/question/28353170

#SPJ4

Due to the oxygen from the air combining with the magnesium to form magnesium oxide, or MgO, the mass has increased.

The total mass of the magnesium increases when it is heated because magnesium combines with oxygen to generate magnesium oxide ( so it supported the hypothesis). It is oxygen that has caused the increased bulk.

Magnesium creates light intense enough to briefly impair your vision when it combines with oxygen. Magnesium burns so brightly because a lot of heat is released during the process. This exothermic process causes magnesium to donate two electrons to oxygen, resulting in the formation of powdered magnesium oxide (MgO).

Therefore, Due to the oxygen from the air combining with the magnesium to form magnesium oxide, or MgO, the mass has increased and hence the other 1.95 grams has come from oxygen.

To learn more about magnesium metal refer-https://brainly.com/question/20264445

#SPJ4

Then, the dissolution process is endothermic. The solution has a positive 25.8 Kilojoules per mole specific heat. That will be equivalent to the solution's specific heat as its temperature drops.

(a) When a 4.25-g sample of solid ammonium nitrate dissolves in 60.0 g of water in a coffee-cup calorimeter ( the temperature drops from 23.0 C to 16.6 C . Calculate H (in kJ/mol NH4NO3) for the solution process shown below. Assume that the specific heat of the solution is the same as that of pure water. Hint: this process occurs at constant pressure. NH4NO3(s) --> NH4+(aq) + NO3-(aq) H = kJ/mol?

Answer and Explanation:

Given data:Mass of the ammonium nitrate

(NH4NO3) = 4.25 g

Mass of the water (H2O) = 60.0 g

Total mass of the mixture ( reactants) = Mass of the ammonium nitrate + Mass of the water

Total mass of the mixture ( reactants) = 4.25 g + 60.0 g = 64.25 g

Specific Heat (c) = 4.184 Jg/K

Drop in temperature (ΔT) = 23.0oC−16.6oC=6.4oC

1 Heat energy for the mixture

Q = m×c×ΔT

Here,

Q = Heat energy

m = mass of the mixture = 64.25 g

c = Specific Heat = 4.184 Jg/K

ΔT = 6.4oC

Q = 64.25g×4.184Jg/K×6.4oC

Q = 1720.4608 J

Q = 1.720 k J

2ΔH for the ammonium nitrate

ΔH = Q / Number of moles of the ammonium nitrate

Number of moles of the ammonium nitrate (n) = mass of ammonium nitrate / molar mass of ammonium nitrate

Mass of the ammonium nitrate = 4.25 g

Molar mass of the ammonium nitrate = 80g/mol

Number of moles of the ammonium nitrate (n) = 4.25/80

Number of moles of the ammonium nitrate (n) = 0.053125 moles

ΔH = Q/Number of moles of the ammonium nitrate

ΔH = 1.720kJ/0.053125mol

ΔH = 32.376 kJ/mol.

the endothermic response,Because the reaction is endothermic, meaning it takes energy from the environment in the form of heat, the beaker turns cold when ammonium nitrate is dissolved in water. As a result, the endothermic reaction of hydrating NH4NO3 causes the beaker to become cold.

Heat is released during an exothermic reaction, raising the temperature of the immediate environment. The surrounding is cooled through an endothermic process that absorbs heat.

Learn more about specific heat here:

https://brainly.com/question/11297584

#SPJ4

Energy investment in the first stage of glycolysis requires glucose to be phosphorylated and cleaved to yield two molecules.

Glycolysis is a metabolic pathway that converts glucose into two molecules of pyruvate in the presence of oxygen or two molecules of lactate in the absence of oxygen.

The metabolic pathway that converts glucose to pyruvate is known as glycolysis. This free energy is used to create the high-energy molecules adenosine triphosphate and reduced nicotinamide adenine dinucleotide. Glycolysis is a series of ten enzyme-catalyzed reactions. The process occurs in a cell's cytoplasm and does not require oxygen. It can be found in aerobic and anaerobic organisms. Phosphorylation traps glucose with the help of the enzyme hexokinase.

To learn more about glycolysis, here

https://brainly.com/question/14076989

#SPJ4

The correct answer is it is formed via the more/most stable carbocation.  

The following reaction occurs between unsymmetrical alkene (CH₃CH=CH₂) and unsymmetrical electrophilic reagent (H-Br) -

CH₃CH=CH₂ + H-Br → CH₃-CH(Br)-CH₃ + H₃C-CH₂-CH₂-Br

CH₃-CH(Br)-CH₃ is the primary product because it is formed via a secondary carbocation intermediate. In comparison, H₃C-CH₂-CH₂-Br is the minor product because it is created via a primary carbocation intermediate. The stability of secondary carbocation is higher as compared to the primary carbocation. These products are according to Markovnikov's rule.

The above discussion suggests that option C is the correct answer.

What is markovnikov's rule?

Markovnikov's rule states that when an asymmetrical reagent is added to an asymmetrical alkene, then the negative half of the reagent will attach to the carbon atom containing fewer hydrogen atoms.

Learn More about Markovnikov's Rule here :

https://brainly.com/question/28348492?referrer=searchResults

#SPJ4

In order to protect underground pipelines and storage tanks made of iron, the iron is made the cathode of a voltaic cell through a process called Impressed current method which is a kind of cathodic protection.

There are two methods which belongs to cathodic protection

a) one is by connecting the base metal with a more reactive metal and making the more reactive metal anode which sacrifices itself protecting the base metal [Iron in this case] : This is known as Sacrificial anodization protection

b) the second method is : Impressed current method where the base metal is connected to a battery in such a way that it starts behaving as cathode. This method is used in the given problem

learn more about cathode here:

https://brainly.com/question/4052514

#SPJ4

Five electron groups are engaged in the triangular bipyramidal structure, resulting in sp3d hybridization. The orbital angles are 90° and 120°.

The result is that the VSEPR theory, in which three atoms give an electron pair and create a trigonal bipyramid with angles of 120° and 108°, can explain sp3d hybridization.

The only conceivable molecule geometry for sp3d hybridised centre atoms is trigonal bipyramidal. Trigonal bipyramidal shape is likewise the result if all bonds are present.

There is sp3d hybridization in SF4. Five bonds encircling a single phosphorus correspond to sp3d hybridization in PF5. Six bonds are arranged around one sulphur in SF6 to coincide with sp3d2 hybridization. As you can see, the hybridization produces the same amount of bondable hybridised orbitals regardless of the number of orbitals employed in the process.

To know more about orbital hybridization, visit:

brainly.com/question/24195443

#SPJ4

The volume of this gas if placed at stp is 156.7 L.

What is mole?

The amount of substance that has the same number of chemical species (atoms, molecules, ions, etc.) as the number of atoms present in 12g of the carbon-12 isotope is referred to as a mole.

What is gas?

The intermolecular forces of attraction are even weaker than in the liquid form of matter in the gas state. The gas particles are spaced farther apart from one another. Given its kinetic energy, the molecule has weak intermolecular forces.

PV=nRT

V=30.4L

n=6.9 moles

T=335 K

R= 62.36 L.Torr/K.mol

Then,

P=(6.9molx62.36(L.Torr/K.mol)x335K)/30.4L

P=4741 Torr

At STP conditions are T=273.15 K and P=100kPa

Then, V=(6.9molesx273.15Kx8.314(L.KPa/K.mol))/100KPa

V=156.7 L

Therefore,  the volume of this gas if placed at stp is 156.7 L.

Learn more about mole from the given link.

https://brainly.com/question/1427235

#SPJ4

C₂H₅OH(l) + 3O₂(g)  →  2CO₂(g) + 3H₂O(l)

For complete combustion of ethanol, the amount of heat produced as measured in the bomb calorimeter is 1364.4kJ/mol at 25° C . The enthalpy of combustion for the reaction will be -1366.95kJ/mol

The combustion equation can be balanced as follows;

Firstly i had counted all the carbons, hydrogens and oxygens on the reactant sides as follows;

C= 2           H= 6          O= 3

and on the product side as follows;

C= 1             H= 2           O=3

Then I balanced the equation by multiplied the reactants and the products with suitable coefficients.

C₂H₅OH + 3O₂  →  2CO₂ + 3H₂O

Now the given equation is balanced because it has all the reactants and products in same amount as

C= 2            H= 6             O= 7

The same concentration of Carbon, hydrogen and oxygen is present on both reactants and products side.

To look more about combustion equation click here

brainly.com/question/7522380

#SPJ4

The calculated concentration of the H₂SO₄ solution is 0.20 M.

Firstly, we can calculate number of moles of LiOH that are present in the 83.6 mL of 0.12 M LiOH solution.

Volume in mL = 83.6 mL

Volume in litres = 83.6 / 1000 = 0.0836 L

Molarity of LiOH = 0.12 M

Now, to calculate the moles of LiOH 83.6 mL of 0.12 M LiOH solution, formula is:

Mole = Molarity × Volume

So, Moles of LiOH = 0.12 × 0.0836 = 0.010032 moles

Next, we have to calculate the amount of H2SO4 required to react with 0.010032 moles of LiOH:

2LiOH + H₂SO₄ → Li₂SO₄ + 2H₂O

From the above balanced equation, it can be said that 2 moles of LiOH reacted with 1 mole of H₂SO₄. Thus,

The number of moles of H₂SO₄ that are required to react with 0.010032 moles of LiOH = 0.010032 / 2 = 0.005016 mole of H₂SO₄

Now, finally, we will calculate the molarity of H₂SO₄:

Molarity = Mole / volume

Mole of H₂SO₄ = 0.005016 mole

Volume = 25 mL = 25 / 1000 = 0.025 L

On putting these values in the molarity formula-

Molarity of H₂SO₄ = 0.005016 moles / 0.025 L

Molarity of H₂SO₄ = 0.20 M

Hence, the unknown concentration of H₂SO₄ is found to be 0.20 M.

To know more about titration, visit:

https://brainly.com/question/2728613

#SPJ4

The statements given in 1 and 3 are true about Buffer solutions.

Statement 1:

A buffer solution can be made by mixing equal concentrations of ​acetic acid and sodium acetate because in buffer solutions strong base should be less. Hence, here acetic acid is the weak acid and sodium acetate is the corresponding salt.

Statement 2:

A buffer solution can be made by mixing equal concentrations of ​hydrochloric acid and sodium chloride, this statement is false because no buffer solution can be made from strong acid like HCl.

Statement 3:

A buffer solution resists changes in pH when small quantities of acid ​or base are added to the solution and this is true.

Hence, the correct statements are 1 and 3.

Learn more about Buffer solutions from the link given below.

https://brainly.com/question/13077571

#SPJ4

Helicase would cease to function if the AMP-PNP was not hydrolyzed. ATP binding and hydrolysis cause conformational changes that allow helicase to unwind DNA.

Helicases are nucleic acid or nucleic acid protein complex binding enzymes that can also remodel them. There are helicases for both DNA and RNA. DNA helicases are required during DNA replication because they split double-stranded DNA into single strands, allowing each strand to be copied independently.

Helicases are a type of enzyme that is thought to be essential to all organisms. Helicases are motor proteins that use ATP hydrolysis to move directionally along a nucleic acid phosphodiester backbone, separating two hybridized nucleic acid strands. DNA helicases catalyze the dissolution of the hydrogen bonds that connect the two strands of double-stranded DNA. This energy-demanding unwinding reaction produces single-stranded DNA, which is used as a template or reaction intermediate in DNA replication, repair, and recombination.

To learn more about helicase, here

https://brainly.com/question/13543444

#SPJ4

1.6 moles of reactant will be in excess .

What is reactant?
A reagent, also known as an analytical reagent, is a substance as well as compound that is added to a system in order to trigger a chemical reaction or determine whether one has already occurred. Although the words "reagent" and "reactant" are frequently used interchangeably, "reactant" refers to a substance that is consumed during a chemical reaction. Even though they are part of the reaction's mechanism, solvents aren't typically referred to as reactants. Catalysts aren't reactants either because they aren't used up in the reaction. Reactants are frequently referred to as substrates in biochemistry, particularly in relation to enzyme-catalyzed reactions.

By using stoichiometric ratio
5 moles of o2 required to react with 4 moles of nh3
1 moles of o2 required = 4/5 moles of nh3

Here,
When we have 3 moles of o2
then 3 moles of o2 required =  4/5 x 3
                                              = 12/5 moles
                                              = 2.4 moles
then excess of moles of nh3 will be 4 - 2.4 = 1.6.

learn more about reactant
https://brainly.com/question/26283409
#SPJ4

The answer that has the lowest oxygen content at the specified temperature, BeBr2, is option b, making it the correct choice.

The balance pressure of a vapor beyond its liquid (or solid), or the pressure of vapor produced by the evaporate of a liquid (or solid) over a specimen of the liquid (or sturdy) in a closed container, is the evaporation of a liquid.

Depending on the merits of its intermolecular forces, a liquid's vapor pressure is one of its characteristics. Weak molecules make liquids more easily vaporize and have higher vapor pressure. A liquid with higher intermolecular interactions has a lower evaporation rate since it takes longer for it to evaporate.

To know more about Vapor pressure visit:

https://brainly.com/question/11864750

#SPJ4

3 p. Compared to 2 s, it's going from like the 3 p level 123 up here to the 2 s level versus 4, p to 3 p, 4 tethys. According to the quantum-mechanical model for the hydrogen atom.

Methane, widely known as natural gas, has a healthy substitute in hydrogen. According to estimates, it makes about 75% of the universe's mass and is the most prevalent chemical element. Huge quantities of hydrogen atoms are present on earth in water, plants, animals, and, of course, people. The principal energy level, energy level, orbital (arbitrary level), and spin of electrons are all described in quantum mechanics models along with the possibility of placing them inside an atom. According to quantum theory, which asserts that matter exhibits wave-like qualities, the quantum mechanics model is built on this idea.

Learn more about hydrogen here:

https://brainly.com/question/11837837

#SPJ4

Answer:

The initial temperature of the coffee was 75°C.

ΔH > 0, the process is endothermic; this is true about this reaction in which ammonium nitrate is dissolved in water

An endothermic reaction is a term used in chemistry to describe the chemical reactions in which the reactants absorb heat energy from the surrounding environment to produce the products

When cold packs are filled with water and ammonium nitrate, and the bag is squeezed then the water interacts with the chemical (ammonium nitrate) to initiate a reaction that decreases the temperature of the water to almost freezing. It can decrease inflammation and numb pain in the area because the icing is effective at reducing swelling and pain because the cold constricts blood vessels and decreases circulation to the area of inflammation.

To learn more about the endothermic reaction; click here:

https://brainly.com/question/3206251

#SPJ4

Scientists made significant contributions to our understanding of the structure and function of DNA. Place the scientists' names in the correct chronological order, starting with the first scientist(s) name to make a contribution.

Hershey and Chase used which of the following facts to try to ascertain whether the genetic material is protein or DNA: protein does not contain phosphorus.

Avery, McCarty, and MacLeod tried to be investigators and were responsible for the following discovery the S cell chemicals that had been destroyed by heat were purified. Live R cells were used to examine the compounds' potential for transformation. DNA turned out to be the transformative agent.

Learn more about DNA

https://brainly.com/question/16099437

#SPJ4

According to the question, SO2 is the best description of electron distribution in Lewis structure.

When we draw Lewis structures, sometimes the electrons are shared in a way which seems "unfair." For instance, in (CH3)3NO, to give N 8 electrons (and not more, since N can't have more than 8), we have to draw a single bond to oxygen. If we see a reaction between (CH3)3N and an oxygen atom, both electrons that form the bond to O come from N (the former lone pair). (This is a rare example of a reaction that is both a Lewis acid-base reaction and a redox reaction.) However, once the bond is made, these electrons are shared. If you imagine that they are shared equally, then there is a single positive charge on N and negative charge on O. These are called formal charges.

Learn more about formal charges at,

https://brainly.com/question/8965672

#SPJ4

True the major organic of the following reaction is optically active.

What is Optically active substance?

Optically active chemicals are those substances that have the ability to change (rotation) the polarisation plane of plane polarised light. Dextrorotatory compounds are those that rotate the plane clockwise (to the right).

What is the Polarization Plane?

The direction that lights with linear polarisation are polarised is indicated by the term "plane of polarisation."

It follows that True: The main optically active organic in the following reaction. 1. BH 3. THF 2. H2O2 4.NaOH .

To learn more about optically active

brainly.com/question/15892094

#SPJ4

The pH of the solution after 73 minutes is 0.56.

Initial number of moles of H+ ions = molarity of solution × volume of solution = 0.552 × 1.25

             = 0.69

The concentration of H+ ions in solution will now decrease during the electrochemical process.

By applying Faraday's formula, we can determine that the number of moles of H(+) discharged at the electrode is given by n = Q/(z × F),

where Q = the total electric charge in Coulomb,

           F = the Faraday constant,

           z = the number of electrons transferred per ion = 1 (in this case)

We also know that Q = I × t

                                   = 11.4 × 73 × 60

                                   = 49932 C

∴ n = Q/(z × F)

     = (49932)/( 1 × 96500 )

     = 0.5174

The amount of H+ ions left in the solution is now equal to 0.69 - 0.5174 = 0.357 moles.

Then, molecularity of a solution is calculated as the number of moles divided by the volume of the solution = ( 0.357 / 1.25 ) = 0.2856 M.

Lastly, concentration of [H+] = 0.2856 M

∴ pH = -log [H+] = -log [ 0.2856 ] = -log [ 2856 × 10⁻⁴ ] = 0.56

So, pH is calculated 0.56 .

To learn more about pH, here :

https://brainly.com/question/10087107?referrer=searchResults

#SPJ4

NaOH is the substance that, in response to the query, would be regarded as an electrolyte. Your blood and other bodily fluids include minerals called electrolytes that are electrically charged.

What transpires if your body is deficient in electrolytes?

Blood clotting, muscular contractions, acid balance, and fluid control can all be affected when your body is low on electrolytes. Since your heart is a muscle, electrolytes aid in controlling your heartbeat.

How can I balance my electrolytes again?

The best way to keep your electrolyte balance is to stay hydrated. The most natural option for hydration is water. Compared to other drinks, it is less expensive and more readily available. Another option for restoring electrolytes is

To know more about electrolyte visit:

https://brainly.com/question/28699046

#SPJ4

A gas at 772 mph and 35oc occupies a volume of 6.85 l, calculate its volume if the temperature is raised to 50oc at a constant pressure and the final volume is 7.18L.

What is Charles law?

Charles' law asserts that a gas's volume is equal to a constant number times the temperature of that gas, as determined by the Kelvin scale (zero Kelvin corresponds to -273.15 degrees Celsius).

What is volume?

The volume (in inches, quarts, or centimeters) that a three-dimensional object takes up in space: The amount of a material that fills a given volume, measured in cubic capacity.

According to Charles law, the volume of a gas is directly proportional to  the absolute temperature at constant pressure.

It can be mathematically represented as; V1/T1 = V2/T2 where V1 = initial volume, and V2 = final volume.

T1= initial temperature in Kelvin and T2= final temperature in  Kelvin.

Here V1 = 6.85 L , T1= 35 + 273 =308 K and T2 =50 +27 =323 K

Final volume = 7.18 L

Therefore, a gas at 772 mph and 35oc occupies a volume of 6.85 l, calculate its volume if the temperature is raised to 50oc at a constant pressure and the final volume is 7.18L.

Learn more about Charles law from the given link.

https://brainly.com/question/16133810

#SPJ4

The balanced chemical equation form of the following equation is Br₂ + 2S₂O₃²⁻ + 10H₂O ⇒ 2Br⁻ + 4SO₄²⁻ + 2OH⁺.

A chemical equation is said to be balanced if the quantity of each type of atom in the reaction is the same on both the reactant and product sides. In a balanced chemical equation, the mass and the change are both equal.

Because mass cannot be generated or destroyed, according to the rule of conservation of mass, a chemical equation must always be in balance.

It's necessary to balance a chemical equation and a chemical reaction. This is so that it can convey how many moles are reacting and creating. The amount of electron that are transferred from one substance to another is also indicated.

Thus, balanced chemical equation is 2S₂O₃²⁻ + 10H₂O ⇒ 2Br⁻ + 4SO₄²⁻ + 2OH⁺.

To learn more about balanced chemical equation, follow the link;

https://brainly.com/question/28294176

#SPJ1

In the balanced chemical reaction of MnO₂, the coefficient of H⁺ is 4.

Balanced chemical reaction

The chemical equations which have the same number and same type of each atom on both sides of the equation is known as balanced chemical equation. The coefficients in a balanced equation must be always the simplest whole number ratio. Mass is always conserved in chemical reactions i.e., neither destroyed nor created.

Balanced chemical reaction of MnO₂ is given as:

5MnO₂ + 4H⁺ → 3Mn₂ + 4H₂O + 2MnO₄⁻

Hence, the coefficient of H⁺ in the balanced chemical equation of reduction MnO₂ is 4.

Learn more about balanced chemical reactions from the link given below.

https://brainly.com/question/14152531

#SPJ4

The properties of the unknown solids which will help to determine whether or not they are ionic solids is them possessing a high melting and boiling points.

This is referred to as a chemical compound which comprises of ions and is usually held together by electrostatic forces called ionic bonding.

Ionic solids have to undergo melting which involves the application of heat in other to test the melting and boiling points as solid substances are unable to do that due to its tightly packed particles which is therefore the reason why it was chosen as the correct choice.

Read more about Ionic solids here https://brainly.com/question/2773282

#SPJ1